Price List BUILDING, January 2016 Pittsburgh Corning UK Ltd (Building)
|
|
- Everett Williams
- 7 years ago
- Views:
Transcription
1 Price List 2016 BUILDING, January 2016 Pittsburgh Corning UK Ltd (Building) FOAMGLAS PERINSUL HL FOAMGLAS Slabs FOAMGLAS Blocks FOAMGLAS Tapered Slabs and Blocks FOAMGLAS Boards FOAMGLAS PERISAVE FOAMGLAS Accessories
2 Index FOAMGLAS PERINSUL HL 3 SLABS - FOAMGLAS Slabs 4 - FOAMGLAS READY BLOCK 8 - FOAMGLAS ROOF BLOCK 11 - FOAMGLAS Tapered Slabs 14 - FOAMGLAS Tapered READY BLOCK 15 - FOAMGLAS Tapered ROOF BLOCK 16 BOARDS - FOAMGLAS WALL BOARD 17 - FOAMGLAS FLOOR BOARD 18 - FOAMGLAS READY BOARD 21 - FOAMGLAS ROOF BOARD G2 22 FOAMGLAS PERISAVE 23 FOAMGLAS Accessories 24 Frequently Asked Questions & Further Information 32 General Terms & Conditions of Sale 34
3 FOAMGLAS PERINSUL HL FOAMGLAS PERINSUL HL Compressive strength at breakpoint 2.9 N/mm 2 Applications: To ensure continuity of the insulation system by eliminating thermal bridging at structural junctions. Technical Data, see European Technical Approval (ETA) and Product Profile literature. Article number Thickness x Width x Length Pieces per pack Linear m per pack Gross kg per pack Price per pack * Thickness = Height mm pcs / pack m / pack kg / pack Price / pack 65 x 100 x x 140 x x 215 x x 100 x x 140 x x 215 x x 140 x x 215 x Typical applications include: Perimeter Insulation to prevent thermal (cold) bridging between structural elements of the Building: example, between concrete structure and brick or block wall, timber wall, door threshold etc. PERINSUL sizes suit popular brick and block dimensions. Use PERINSUL HL DPC may be located above or below the Perinsul HL. Lay PERINSUL into an even bed of wet mortar; butt the PERINSUL up dry end to end. Lay a bed of mortar over the PERINSUL and commence with construction of the wall. For further information on PERINSUL HL see: Constructive Details Building Information Modelling, BIM BBA Certificate Contact info@foamglas.co.uk for further information. Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1000 mm x 1450 mm. 65 mm x 100 mm x 450 mm: 21 packs / pallet 65 mm x 140 mm x 450 mm: 21 packs / pallet 65 mm x 215 mm x 450 mm: 18 packs / pallet 100 mm x 100 mm x 450 mm: 21 packs / pallet 100 mm x 140 mm x 450 mm: 21 packs / pallet 100 mm x 215 mm x 450 mm: 21 packs / pallet 140 mm x 140 mm x 450 mm: 21 packs / pallet 140 mm x 215 mm x 450 mm: 18 packs / pallet FOAMGLAS PERINSUL HL Delivery Charges Pack Quantity England & Wales Scotland Delivery Charges Delivery Charges Over 21 Delivery free of charge Delivery free of charge Delivery: Contact FOAMGLAS, Pittsburgh Corning UK, Tel or info@foamglas.co.uk * See: Order Value, Delivery, Conditions of Sale, page 34. 3
4 FOAMGLAS Slabs FOAMGLAS W+F D = W / mk Density: 100 kg /m 3 Technical Data, see TDS or Product Profile literature. Applications: Façades, External and Internal Walls, Cavity Walls, Soffits. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Slabs Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack W+F x 600 x W+F x 600 x W+F x 600 x W+F x 600 x W+F x 600 x W+F x 600 x W+F x 600 x W+F x 600 x W+F x 600 x W+F x 600 x W+F x 600 x W+F x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. 12 packs / pallet. Pallet dimensions approx mm x 1100 mm x 1450 mm. * For thickness over 160 mm install as 2 layers, minimum 80 mm per layer. 4
5 FOAMGLAS Slabs FOAMGLAS T4+ D = W / mk Density: ~ 115 kg /m 3 Technical Data, see TDS or Product Profile literature. Applications: Flat and Tapered Roofs. If required, FOAMGLAS can be installed in 2 or more layers. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Slabs Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x T x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. 12 packs / pallet. Pallet dimensions approx mm x 1100 mm x 1450 mm. * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 5
6 FOAMGLAS Slabs FOAMGLAS S3 D = W / mk Density: ~ 135 kg /m 3 Technical Data, see TDS or Product Profile literature. Applications: Flat and Tapered Roofs, which require insulation with a higher compressive strength. If required, FOAMGLAS can be installed in 2 or more layers. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Slabs Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x S x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. 12 packs / pallet. Pallet dimensions approx mm x 1100 mm x 1450 mm. * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 6
7 FOAMGLAS Slabs FOAMGLAS F D = W / mk Density: ~ 165 kg /m 3 Technical Data, see TDS or Product Profile literature. Applications: Flat and Tapered Roofs, which require insulation with the highest compressive strength. If required, FOAMGLAS can be installed in 2 or more layers. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Slabs Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack F x 600 x F x 600 x F x 600 x F x 600 x F x 600 x F x 600 x F x 600 x F x 600 x F x 600 x F x 600 x F x 600 x F x 600 x F x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. 12 packs / pallet. Pallet dimensions approx mm x 1100 mm x 1450 mm. * For thickness over 160 mm install as 2 layers, minimum 80 mm per layer. 7
8 FOAMGLAS READY BLOCK FOAMGLAS READY BLOCK T4+ D = W / mk Density: ~ 115 kg /m 3 Technical Data, see TDS or Product Profile literature. Applications: For Flat and Tapered Roofs. If required, FOAMGLAS can be installed in 2 or more layers, for base layer use Slab T4+. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Blocks Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x RDBLT x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 32 packs / pallet. * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 8
9 FOAMGLAS READY BLOCK FOAMGLAS READY BLOCK S3 D = W / mk Density: ~ 135 kg /m 3 Technical Data, see TDS or Product Profile literature. Applications: For Flat and Tapered Roofs. If required, FOAMGLAS can be installed in 2 or more layers, for base layer use Slab S3. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Blocks Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x RDBLS x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 32 packs / pallet. * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 9
10 FOAMGLAS READY BLOCK FOAMGLAS READY BLOCK F D = W / mk Density: ~ 165 kg /m 3 Technical Data, see TDS or Product Profile literature. Applications: For Flat and Tapered Roofs. If required, FOAMGLAS can be installed in 2 or more layers, for base layer use Slab F. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Blocks Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x RDBLF x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 32 packs / pallet. * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 10
11 FOAMGLAS ROOF BLOCK FOAMGLAS ROOF BLOCK G1 T4+ D = W / mk Density: ~ 115 kg /m 3 Technical Data, see TDS. Applications: For Flat and Tapered Roofs. If required, FOAMGLAS can be installed in 2 or more layers, for base layer use Slab T4+. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Blocks Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x RBLG1T x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 32 packs / pallet. Price of FOAMGLAS ROOF BLOCK G1 T4+ is the same price as FOAMGLAS READY BLOCK T4+ * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 11
12 FOAMGLAS ROOF BLOCK FOAMGLAS ROOF BLOCK G1 S3 D = W / mk Density: ~ 135 kg /m 3 Technical Data, see TDS. Applications: For Flat and Tapered Roofs. If required, FOAMGLAS can be installed in 2 or more layers, for base layer use Slab S3. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Blocks Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x RBLG1S x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 32 packs / pallet. Price of FOAMGLAS ROOF BLOCK S3 is the same price as FOAMGLAS READY BLOCK S3 * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 12
13 FOAMGLAS ROOF BLOCK FOAMGLAS ROOF BLOCK G1 F D = W / mk Density: ~ 165 kg /m 3 Technical Data, see TDS. Applications: For Flat and Tapered Roofs. If required, FOAMGLAS can be installed in 2 or more layers, for base layer use Slab F. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Blocks Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack RBLG1F x 600 x RBLG1F x 600 x RBLG1F x 600 x RBLG1F x 600 x RBLG1F x 600 x RBLG1F x 600 x RBLG1F x 600 x RBLG1F x 600 x RBLG1F x 600 x RBG1LF x 600 x RBLG1F x 600 x RBLG1F x 600 x RBLG1F x 600 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 32 packs / pallet. Price of FOAMGLAS ROOF BLOCK F is the same price as FOAMGLAS READY BLOCK F * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 13
14 TAPERED INSULATION FOAMGLAS FOAMGLAS Tapered Slab Tapered insulation FOAMGLAS Type Slab T4+ D = W / mk Density: ~ 115 kg /m 3 Technical Data, see TDS or Product Profile literature. Tapered insulation FOAMGLAS Type Slab S3 D = W / mk Density: ~ 135 kg /m 3 Technical Data, see TDS or Product Profile literature. Tapered insulation FOAMGLAS Type Slab F D = W / mk Density: ~ 165 kg /m 3 Technical Data, see TDS or Product Profile literature. Factory produced with a Tapered thickness as below: % Slope: 0.55% 1.1% 1.25% 1.7% 2.2% 3.3% 4.4% 5.5% 6.7% Gradient: 1:180 1:90 1:80 1:60 1:45 1:30 1: :15 Angle: Applications: Tapered Insulation System for Roofs, Balconies, Terraces, Walkways, Vehicle Roadway & Parking. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Contact FOAMGLAS UK for further information regarding pricing**. Contact FOAMGLAS UK for the Tapered Insulation Design Service. * For thickness over 180 mm install as 2 layers. Base layer is Slab T4+. FOAMGLAS Building, Net prices, excluding V.A.T.,
15 TAPERED INSULATION FOAMGLAS FOAMGLAS Tapered READY BLOCK T4+ Tapered insulation FOAMGLAS Type READY BLOCK T4+ D = W / mk Density: ~ 115 kg /m 3 Technical Data, see TDS or Product Profile literature. Factory produced with a Tapered thickness* as below: % Slope: 0.55% 1.1% 1.25% 1.7% 2.2% 3.3% 4.4% 5.5% 6.7% Gradient: 1:180 1:90 1:80 1:60 1:45 1:30 1: :15 Angle: Applications: Flat Roofs, Tapered Insulation System, FOAMGLAS READY BLOCK. READY BLOCK is cold bonded with PC adhesive to substructures. Membranes can be torched directly onto the upper surface of the READY BLOCK. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. FOAMGLAS Tapered READY BLOCK S3 Tapered insulation FOAMGLAS Type READY BLOCK S3 D = W / mk Density: ~ 135 kg /m 3 Technical Data, see TDS or Product Profile literature. Factory produced with a Tapered thickness* as below: % Slope: 0.55% 1.1% 1.25% 1.7% 2.2% 3.3% 4.4% 5.5% 6.7% Gradient: 1:180 1:90 1:80 1:60 1:45 1:30 1: :15 Angle: Applications: Flat Roofs, Tapered Insulation System, FOAMGLAS READY BLOCK. READY BLOCK is cold bonded with PC adhesive to substructures. Membranes can be torched directly onto the upper surface of the READY BLOCK. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. FOAMGLAS Tapered READY BLOCK F Tapered insulation FOAMGLAS Type READY BLOCK F D = W / mk Density: ~ 165 kg /m 3 Technical Data, see TDS or Product Profile literature. Factory produced with a Tapered thickness* as below: % Slope: 0.55% 1.1% 1.25% 1.7% 2.2% 3.3% 4.4% 5.5% 6.7% Gradient: 1:180 1:90 1:80 1:60 1:45 1:30 1: :15 Angle: Applications: Flat Roofs, Tapered Insulation System, FOAMGLAS READY BLOCK. READY BLOCK is cold bonded with PC adhesive to substructures. Membranes can be torched directly onto the upper surface of the READY BLOCK. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Contact FOAMGLAS UK for further information regarding pricing**. Contact FOAMGLAS UK for the Tapered Insulation Design Service. * For thickness over 180 mm install as 2 layers. Base layer is Slab T4+. 15
16 TAPERED INSULATION FOAMGLAS FOAMGLAS Tapered ROOF BLOCK G1 T4+ Tapered insulation FOAMGLAS Type ROOF BLOCK G1 T4+ D = W / mk Density: ~ 115 kg /m 3 Technical Data, see TDS or Product Profile literature. Factory produced with a Tapered thickness* as below: % Slope: 0.55% 1.1% 1.25% 1.7% 2.2% 3.3% 4.4% 5.5% 6.7% Gradient: 1:180 1:90 1:80 1:60 1:45 1:30 1: :15 Angle: Applications: Flat Roofs, Tapered Insulation System, FOAMGLAS Tapered ROOF BLOCK G1 T4+. ROOF BLOCK is cold bonded with PC adhesive to substructures. If required, FOAMGLAS can be installed in 2 or more layers, for base layer use Slab T4+. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 16
17 FOAMGLAS Boards FOAMGLAS WALL BOARD W+F D = W / mk Density: 100 kg /m 3 Technical Data, see pages or Product Profile literature. Applications: Façades, Walls and Soffits Internal and External, Walls Above and Below Ground. If required, FOAMGLAS can be installed in 2 or more layers. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article Number Thickness, dimensions * Boards Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x WBW+F x 1200 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 40 mm to 90 mm thickness: 8 packs / pallet. 100 mm and 160 mm thickness: 6 packs / pallet. * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 17
18 FOAMGLAS Boards FOAMGLAS FLOOR BOARD T4+ D = W / mk Density ~ 115 kg /m 3 Technical Data, see pages or Product Profile literature. Applications: Typically used internally or externally, above or below the floor structure. If required, FOAMGLAS can be installed in 2 or more layers. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Boards Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x FBT x 1200 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 40 mm to 90 mm thickness: 8 packs / pallet 100 mm and 160 mm thickness: 6 packs / pallet 170 mm and 180 mm thickness: 14 packs / pallet * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 18
19 FOAMGLAS Boards FOAMGLAS FLOOR BOARD S3 D = W / mk Density ~ 135 kg /m 3 Technical Data, see pages or Product Profile literature. Applications: Insulation with higher compressive strength. Typically used internally or externally, above or below the floor structure. If required, FOAMGLAS can be installed in 2 or more layers. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Boards Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x FBS x 1200 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 40 mm to 90 mm thickness: 8 packs / pallet 100 mm and 160 mm thickness: 6 packs / pallet 170 mm and 180 mm thickness: 14 packs / pallet * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. 19
20 FOAMGLAS Boards FOAMGLAS FLOOR BOARD F D = W / mk Density ~ 165 kg /m 3 Technical Data, see pages or Product Profile literature. Applications: Insulation with the highest compressive strength. Typically used internally or externally, above or below the floor structure. If required, FOAMGLAS can be installed in 2 or more layers. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Boards Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x FBF x 1200 x Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 40 mm to 90 mm thickness: 8 packs / pallet 100 mm and 160 mm thickness: 6 packs / pallet * For thickness over 160 mm install as 2 layers, minimum 80 mm per layer. 20
21 FOAMGLAS Boards FOAMGLAS READY BOARD T4+ D = W / mk Density ~ 115 kg /m 3 Technical Data, see pages or Product Profile literature. Applications: Flat Roofs, Pitched and Metal Roofs, External Walls below ground. Torch on membranes can be applied directly to the upper surface of the READY BOARD. If required, FOAMGLAS can be installed in 2 or more layers. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Boards Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x RDBT x 1200 x READY BOARD T4+ has a fleece lower side and a bitumen upper side. Where two or more layers are required, use FOAMGLAS ROOF BOARD G2 T4+ as the base layer. Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 40 mm to 90 mm thickness: 8 packs / pallet 100 mm and 160 mm thickness: 6 packs / pallet 170 mm and 180 mm thickness: 14 packs / pallet * For thickness over 180 mm install as 2 layers, minimum 00 mm per layer. 21
22 FOAMGLAS Boards FOAMGLAS ROOF BOARD G2 T4+ D = W / mk Density ~ 115 kg /m 3 Technical Data, see pages or Product Profile literature. Applications: Typically for Roofs, and as a Base Layer for READY BOARD T4+, and ROOF BOARD G2 T4+. If required, FOAMGLAS can be installed in 2 or more layers. FOAMGLAS with adhesive sealed joints provides an insulation system and vapour barrier. Article number Thickness, dimensions * Boards Material per only pack Price per m 2 Price per pack ** Gross kg mm kg / m 2 per pack Price / m 2 m 2 / pack Price / pack RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x RBG2T x 1200 x FOAMGLAS ROOF BOARD G2 T4+ has fleece on both sides. Where two or more layers are required, use FOAMGLAS ROOF BOARD G2 T4+ as the base layer. Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx mm x 1200 mm x 1450 mm. 40 mm to 90 mm thickness: 8 packs / pallet 100 mm and 160 mm thickness: 6 packs / pallet 170 mm and 180 mm thickness: 14 packs / pallet * For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. For base layer use FOAMGLAS ROOF BOARD G2 T4+. 22
23 Special products PC PERISAVE Base Block D W/(m K) Density: 100 kg/m 3 Compressive strength (EN 826, Annex A) 400 Kpa Technical Data, see Product Profile literature. Applications: Universal base block; meets passive house requirements. System element which meets passive house insulation requirements. Article number Dimensions piece* Thickness x width length Price per mm mm Each PERISS x PC PERISAVE Marginal Stop D W/(m K) Density: 100 kg/m 3 Compressive strength (EN 826, Annex A) 400 Kpa Technical Data, see Product Profile literature. Applications: Marginal stop, insulation and formwork for concrete floor slabs. System element which meets passive house insulation requirements Article number Dimensions Price per piece * thickness x width length mm mm Each PERISMS x PERISMS x * See: Order Value, Delivery, Conditions of Sale, page
24 FOAMGLAS Accessory Prices Primer / Adhesives PC EM Primer Type: Viscous, solvent-free bitumen emulsion. Application: Primer coat to improve adhesion on absorbing substructures as concrete, brickwalls and plaster. Consistency: Liquid Colour: Black Solvents: None Mixing ratio: Used as a primer in cold bitumen applications. Dilute the product 1 : 10 (by volume) with water, (1 part PC EM, 10 parts of water). The base surface should be free of dust and form oil (release agents). PC EM can be applied to a dry or wet surface. Working temperature (air + base surface) : +5 C Drying time: App. 3 to 12 hours depending on temperature and humidity. Storage*: Maximum 1 year. Store dry in well-closed containers. Protect against frost, heat and direct sun exposure. Consumption: About 300 g/m 2 finished mixture. Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 96 pails PC 56 Type: Two-component adhesive, hydraulic binding. Application: Bonding of FOAMGLAS slabs / boards to absorbent surfaces. Adhesion of FOAMGLAS slabs to each other. Surfacer. Consistency: Pasty Colour: Black-brown Solvents: None Mixing ration: Fluid / Powder 3 : 1 by weight. The batch supplies the correct proportional quantities of the two components which should be stirred with a power drill and a mixing paddle to a homogeneous adhesive compound until smooth. Working temperature (air + base surface) : +5 C to +35 C Installation: The base surface should be clean and free of dust, it can be dry or wet. The adhesive is applied to the FOAMGLAS elements to be bonded using a notched trowel (depth of notches 8-10 mm). Working time: At +20 C about 90 minutes Curing time: Several days (1 3 days, depending on temperature, humidity and base surface). Storage*: See label for expiration date. Store dry in well-closed containers. Protect against frost, heat and direct sun exposure. Consumption: Complete bonding with filled joints, about kg/m 2 depending on base surface. Surfacer, about 1.5 kg/m 2 Article number Packing unit, Combi-pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 18 pails PC 88 Type: Two-component adhesive. Application: Bonding of FOAMGLAS slabs / boards on to absorbent and non-absorbent surfaces. Adhesion of FOAMGLAS slabs to each other. Consistency: Pasty Colour: Black Solvents: Little Mixing ration: 1 tin per pail Working temperature (air + base surface) : +5 C to +35 C Installation: The base surface should be clean and free of dust, it must be dry. The adhesive is applied to the FOAMGLAS elements to be bonded using a notched trowel (depth of notches 8-10 mm). Working time: At +25 C 2 to 2½ hours Curing time: Several days (1 3 days, depending on temperature, humidity and base surface). Storage*: See label for expiration date. Store dry in well-closed containers. Protect against frost, heat and direct sun exposure. Consumption: Complete bonding with filled joints, about kg/m 2 depending on base surface. Article number Packing unit, Component Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg (15.1 l) Comp pails + tins PC kg (7.6 l) Comp pails + tins * In closed original pail. Accessory components are fully compatible with FOAMGLAS material and systems. It is highly recommended to use them in connection with FOAMGLAS insulation to avoid damage. Due to dependence on suppliers and exchange rates price adjustments during the year for Accessories remain reserved on date of shipment. 24
25 FOAMGLAS Accessory Prices Adhesives PC 58 Type: Two-component adhesive, hydraulic binding Application: Bonding of FOAMGLAS slabs / boards to absorbent surfaces. Surfacer. Consistency: Pasty Colour: Black-brown Solvents: None Working temperature (air + base surface): +5 C to +35 C Mixing ratio: 24 kg black component + 8 kg powder component (batch supplies the correct proportional quantities) Installation: The base surface should be clean, dry and free of dust and oil. Working time: At 20 C: about 90 minutes Curing time: 1 to 3 days Storage*: See label for expiration date. Store dry in well-closed containers. Protect against frost, heat and direct sun exposure. Consumption: Complete bonding, about 5.0 to 7.0 kg/m 2. Surfacer about 2.0 kg/m 2. Article number Packing unit, Combi-pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 18 pails PC 11 Type: Single-component adhesive Application: Bonding of FOAMGLAS slabs / boards on steel deck using a special extrusion pump applicator. Consistency: Pasty Colour: Black Solvents: Few Working temperature (air + base surface): +5 C to +40 C. Installation: PC 11 is a ready for use, solvent-containing and permanently elastic, non-ageing adhesive to be applied on to a clean base surface. Position and alignement of the bonded insulation slabs can be corrected within 5 minutes. Working time: Drying time: Several days Storage*: See label for expiration date. Store dry in well-closed containers. Protect against frost, heat and direct sun exposure. Consumption: 8 adhesive strips per meter: about 1.0 kg/m 2 (700 g/m 2 surface; 300 g/m 2 butt joint). Note: A compressor powered, air operated Pump for PC 11 can be purchased, or rented (deposit payable), see Price List item Tools, PC 0160, page 27. Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 22 pails PC kg sausage 8 pieces PC 500 Type: Single-component adhesive Application: Bonding of FOAMGLAS slabs / boards to absorbent surfaces. Consistency: Pasty Colour: Black-brown Solvents: Few (< 6%) Working temperature (air + base surface): +5 C to + 40 C Installation: The base surface should be clean, dry and free of dust and oil. Surfaces contaminated with form oil (release agents) should be cleaned prior to application. A primer, for example PC EM, is to be applied as a bonding agent. Working time: At + 20 C, several days. Drying time: Completely dry after several months. Touch dry: Several hours, rapid hardening due to thixotropic behaviour of the adhesive (= time related decrease of viscosity). Storage*: Maximum 1 year. Store dry in well-closed containers. Protect against frost, heat and direct sun exposure. Keep away from open flames and sparks. Consumption: Full, completely bonded with filled joints, about 5.0 to 7.0 kg/m 2. Bonding of waterproofing membrane, about 2.0 kg/m 2. Surfacer, about 2.0 kg/m 2. Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 22 pails * In closed original pail. Due to dependence on suppliers and exchange rates price adjustments during the year for Accessories remain reserved on date of shipment. 25
26 FOAMGLAS Accessory Prices Coatings PC 74 A2 Type: Mineral coating composition Application: Non-combutible coating to be reinforced by glass-fibre fabric PC 150 on FOAMGLAS slabs for the insulation of raised access floors. Consistency: Powdery Colour: Light grey Solvents: None Working temperature (air + base surface): +5 ºC to +35 ºC Mixing ration: 5 6 l water for 25 kg PC 74 A2 Installation: The dry powder is mixed with water. PC 74 A2 is trowel-applied to the dry, dust-free FOAMGLAS surface. Irregularities in the FOAMGLAS layer need to be repaired. PC 150 glass-fibre fabric is embedded with 10 cm overlapping and pressed in the wet PC 74 A2 layer; a second coat of PC 74 A2 is to cover the first. The fabric lining is to be covered completely. Working time: About 3 4 hours Drying time: About hours depending on building moisture. Completely cured after 72 hours (resistant). Storage: See label for expiration date. Store cool and dry in well-closed original bags. Consumption: About 3.5 kg/m 2 (depending on work surface). Article number Packing unit, bag Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 42 bags PC 164 Type: Thin-bed coating Application: 1. PC 164 basic coating is used with fabric PC 150 on FOAMGLAS slabs for ceilings and walls. After sufficient curing the surface allows to be covered, for example with final rendering PC For bonding of FOAMGLAS W+F façade slabs to absorbent and non-absorbent surfaces. Attachment of FOAMGLAS slabs to each other. It is a ready-for-use product, based on a liquid polymer dispersion with mineral extenders, sands and additives. Consistency: Pasty Colour: White. Solvents: None Working temperature (air + base surface): +5 C to +25 C Installation: Coating: The base surface should be clean, free of dust and stable. The pasty coating is applied to the FOAMGLAS insulation using a stainless steel trowel or a notched trowel (depth of notches min. 5 mm). Tools can be cleaned with water. For a basic coating PC 164 is spread on the dust-free FOAMGLAS surface with a smoothing trowel and levelled. Adhesive: The base surface should be clean, free of dust and stable. Start with stirring of PC 164 and apply it to one short and one long side of the FOAMGLAS slabs (in stack) and to the entire surface of the FOAMGLAS slab, using a notched trowel (depth of notches 6 8 mm). The insuation slab is adhered to the wall by pushing it dia gonally into the open corner. Working time: minutes (surface). Drying time: About 3 to 5 days depending on building moisture Storage*: See label for expiration date. Store cool and dry in well-closed container. Protect against frost, heat and direct sun exposure. Consumption: As a coating, about 3.5 kg/m 2. Note: In swimming pools with high relative humidity the additional application of a primer-sealer, for example PC 130, on top of the basic coating PC 164 is strongly recommended. Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 24 pails PC PITTCOTE 404 Type: Highly elastic acrylic latex coating Application: Weather-resistant finish layer. Use with fabric lining PC FABRIC 79P on FOAMGLAS slabs. Consistency: Pasty Colour: Off-white or black Solvents: None Working temperature (air + base surface): At least + 5 C Installation: Coating: The base surface should be dry, clean and free of dust. PITTCOTE 404 is a finish coat which is spread with a stainless steel trowel on to a basic coating, embedding the reinforcement. Tools can be cleaned with water. As a basic coating PC 164 is trowel-applied to the dust-free FOAMGLAS surface and smoothed. Working time: About 3 to 4 hours. Drying time: About 48 hours. Storage*: See label for expiration date. Store cool and dry in well-closed containers. Protect against frost, heat and direct sun exposure. Consumption: About 2.5 to 3.5 kg/m 2. Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC 0010 WHITE 25 kg 24 pails PC 0011 BLACK 25 kg 24 pails * In closed original pail. Due to dependence on suppliers and exchange rates price adjustments during the year for Accessories remain reserved on date of shipment. 26
27 FOAMGLAS Accessory Prices Coatings PC 140 Type: Thin-bed coating composition (processed fine filler based on synthetic dispersion as per DIN ). Area of application: PC 140 is applied with a steel smoothing trowel onto the previously primed surface. Once dry, the prepared surface can be wetted with moisture. Consistency: Pasty Colour: Natural white, matt Solvents: None Working temperature (air + base surface): + 5 ºC to + 35 ºC Installation: Ready-to-use PC 140 fine filler should be well stirred before application. With a more fluid consistency the coating can be sprayed (add max % of water). When the surface begins to dry, it can be smoothed by wetting with a soft cloth or sponge board or when fully dry, the surface may be scrubbed or sanded. Working time: minutes Drying time: App hours depending on building moisture. Touch-dry after 20 minutes to a few hours. Storage: Maximum 1 year. Store cool and dry in well-closed containers. Protect against frost, heat and direct exposure to sunrays. Consumption: As coating app. 1.5 kg/m 2 per mm layer density. Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 24 pails PC 310 Type: Solvent-free bonding course. Area of application: PC 310 is a solvent-free, pigmented and quartz sand bonding course on synthetic resin dispersion. It is used as a primary coat and bonding course for structural plaster on base plaster PC 74 A2. Consistency: Liquid Colour: White, matt Solvents: None Working temperature (air + base surface): + 5 ºC to + 35 ºC Working: PC 310 should be well stirred before use and is applied undiluted by paint brush or by roll. To modify the consistency up to 10 % of water can be added. Working time: minutes Drying time: At + 20 ºC and 65 % relative humidity, app. 12 hours. Storage: Maximum 1 year. Store cool and dry in well-closed containers. Protect against frost, heat and direct exposure to sunrays. Consumption: App. 250 g/m 2 (as primer). Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 24 pails PC 78 Type: Final rendering, grading 1.0 to 3.0 mm Area of application: Final rendering (abrasion). Copolymer made of vinyl acetate, vinyl chloride and ethyl as well as calcite sands and other auxiliary materials. With different finish treatments individual decorative structures can be achieved. A PC 164 basic coating, embedding PC 150 fabric reinforcement, can be covered after sufficient curing with PC 78 final rendering. Consistency: Pasty Colour: Natural white Solvents: None Working temperature (air + base surface): + 5 C to + 25 C Installation: The base surface should be dry, clean, free of dust, level and stable. PC 78 is applied in a thin layer with a stainless steel trowel and then smoothed by abrasion, vinyl etc.. Tools should be cleaned with water. Working time: minutes (surface) Drying time: App hours depending on building moisture. Storage: Maximum 6 months / 1 year. Store cool and dry in well-closed containers. Protect against frost, heat and direct exposure to sunrays. Consumption: Grading 1.0 mm: App kg/m 2 Grading 1.5 mm: App kg/m 2 Grading 2.0 mm: App kg/m 2 Grading 3.0 mm: App kg/m 2 Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg / grading 1.0 mm 24 pails PC kg / grading 1.5 mm 24 pails PC kg / grading 2.0 mm 24 pails PC kg / grading 3.0 mm 24 pails * In closed original pail. Due to dependence on suppliers and exchange rates price adjustments during the year for Accessories remain reserved on date of shipment. 27
28 FOAMGLAS Accessory Prices Special products PC 600 Green Adhesive Type: Ready-to use single-component adhesive; anhydrous, thixotropic polymer glue, based on natural oils Application: Bonding of FOAMGLAS Slabs, Boards and Blocks to concrete and timber substrates and for the sealing of FOAMGLAS joints Consistency: Pasty Colour: Green Solvents: None Working temperature (air + base surface): +5 C to + 40 C Installation: The base surface should be clean, dry and free of dust and oil. Surfaces contaminated with form oil (release agents) should be cleaned prior to application. Working time: At + 20 C, several days. Drying time: Surface drying time is several hours; depth drying time is several days. Storage*: Store dry in tightly closed containers. Protect against frost, heat and direct sun exposure. Keep away from open flames and sparks. Consumption: Full bonding with sealed joints, approximately 4.0 to 6.0 kg/m 2. Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 27 pails PC 130 Sealing Primer Type: White-pigmented sealing primer based upon a saponification-resistant synthetic resin Application: Used as a ready processed primer for PC 164 and PC 74 A2 prior to applying the render Consistency: Liquid Colour: White, mat Working temperature (air + base surface): +5 C to +30 C. Application: PC 130 should be stirred with a power drill and is brush- or roll-applied undiluted. Working time: minutes Drying: 2 4 hours dust dry at 20 C and 50% r.h., after 15 hours ready for coating Storage*: In cool and dry place. Protect against frost, heat, direct sun exposure. Consumption: Approx. 250 ml/m 2 ~ 400 g/m 2 as a primer Article number Packing unit, pail Units per pallet; pallet size: 120 x 80 cm Price / unit PC kg 24 pails 10 kg PC PITTSEAL 444 N - Sealant Type: Single-component sealing compound Application: Sealing of penetrations and connections. Plastic and permanently elastic compound; adheres to steel, concrete, wood, etc. Consistency: Pasty Colour: - Solvents: Few Working temperature (air and base surface): + 10 C to + 25 C Application: The base surface should be dry, clean and free of dust. FOAMGLAS sealant for walls, floors and roofs, NOT for use on soffits / ceilings. For the cartridges use a caulking gun. Drying: No drying; skin formation in 1 to 3 hours. Storage*: See label for expiration date. Store cool and dry in well-closed containers. Protect against frost, heat and direct sun exposure. Keep away from open flames and sparks. Consumption: About 0.25 kg/m. Article number Packing unit, cartridge Units per pallet; pallet size: 120 x 80 cm (12 cartrides per box) Price / unit PC ml cartridge 100 boxes / pallet 4.86 * In closed original pail. Due to dependence on suppliers and exchange rates price adjustments during the year for Accessories remain reserved on date of shipment. 28
WATERPROOFING OF WET ROOMS
WATERPROOFING OF WET ROOMS Waterproofing under tiles For longterm enjoyment of a wetroom area a complete and resistant waterproofing system is an important precondition. Most tiles are by themselves waterproof
More informationConstruction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
More informationELASTOCEM. Technical features. Applications. Two-component flexible, waterproofing and protective cementitious grout.
Two-component flexible, waterproofing and protective cementitious grout. 1504-2 PI-MC-IR Technical features Two-component grout, based on cements, selected aggregates, special additives and synthetic polymers
More informationWOOD FLOORING ADHESIVES
dispersion adhesive 2 component adhesive MS polymer adhesive WOOD FLOORING ADHESIVES PROFESSIONAL PRODUCTS SOUDAL, leading adhesive manufacturer WOOD FLOORING ADHESIVES Soudal NV, located in Turnhout (B)
More informationALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE
Mapeguard WP System ALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE Products used: Mapeguard WP 200, Mapeguard ST, Mapeguard IC, Mapeguard EC, Mapeguard WP
More informationkalox-pool draft 231 repairing refurbishing and finishing KALOX-POOL Waterproof cement-based mortar for protecting and finishing concrete.
kalox-pool draft 231 KALOX-POOL Waterproof cement-based mortar for protecting and finishing concrete. repairing refurbishing and finishing 8-30 C Trowel / Spray 4 mm kalox-pool EN 1504-2 MAIN FEATURES
More informationWecryl Waterproofing System under surfacing supplied by others
Brief description The Wecryl waterproofing system allows a high-quality, seamless and crack-bridging waterproofing layer to be installed under loose-laid or bonded surfacing supplied by others (stone slabs,
More informationCavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.
CI/SfB Tn6 L6813 September 2013 RIW CAVITY DRAIN R20 R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. Other systems are available for specific uses,
More informationConstruction. Pre-Bagged Structural Waterproofing System. Product Description. Product Data. Tests. Form
Construction Product Data Sheet Edition 15/07/2013 Identification no: 01 07 05 04 001 0 000001 Sika 1 Pre-Bagged Structural Waterproofing System Product Description Pre-Bagged Structural Waterproofing
More informationConstruction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION
Sikadur-Combiflex REVISED JULY 2002 Sealing system for cracks and problem joints with large movements Construction DESCRIPTION USES ADVANTAGES The Sikadur-Combiflex joint sealing system consists of two
More informationDivision 9. SignaFlor Pad and Pour Flooring System
Division 9 SignaFlor Pad and Pour Flooring System SPECIFICATIONS Page 1. General... 2 1.1 Description 2 1.2 Quality Assurance 2 1.3 Submittals 2 1.4 Delivery and Storage 3 1.5 Warranty 3 1.6 Working Conditions
More informationMapei systems for radiating floor heating with high thermal efficiency
Mapei systems for radiating floor heating with high thermal efficiency PRODUCTS FOR CERAMIC TILES AND STONE MATERIAL ADHESIVES SEALANTS CHEMICAL PRODUCTS FOR BUILDING III MAPEI systems for radiating floor
More informationTechnical Data Sheet Art. No. 1810. Kiesol. applications. Shelf-life. rate depending on application. Characteristic data of the product
Page 1 of 5 Technical Data Sheet Art. No. 1810 Kiesol Deep protection silicification for waterproofing and refurbishing old and new buildings in the Kiesol System according to WTA Code of Practice 4-4-04/D
More informationMold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
More informationMineral waterproof coating PCI Dichtschlämme
Mineral waterproof coating PCI Dichtschlämme 305 for basement walls, swimming pools and potable water tanks With official test certificate. FIELDS OF For indoor and outdoor use. For walls and floors. For
More informationSECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND.
SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND. 623.10.1 Description. This work shall consist of preparing the surface,
More informationRetail Price List 2015
Retail Price List 2015 SETTING MORTARS SERVOFLEX TRIO SUPER TEC Flexible Full Transfer Thin Set and Medium Bed Mortar 20 KG Flexible, cement-based thin set and medium bed mortar with polymer additive for
More information12.1 Schlüter -KERDI-BOARD
I n n o v a t i v e p r o f i l e s 12.1 Schlüter -KERDI-BOARD S u b s t r a t e U N I V E R S A L S T R U C T U R A L P A N E L, B O N D E D W A T E R P R O O F I N G Application and Function Schlüter
More informationSikaflex Sealant Installation. Sika Corporation
Sikaflex Sealant Installation 1 Critical Success Factors Substrate preparation If done properly would probably eliminate 95% of all call backs Most common mode of sealant failure Must remove all weak material
More informationTecnoepo Flooring System 185
Certificate ICMQ 1305-CPD-0808 Approved Standard EN 1504-2 prospect ZA.1f Direttive 89/106/CEE TECNOCHEM E LEED LEED Leadership Energy Environmental Design THE PRODUCTS: Primer TECNOFIX EP 110 Primer two-component
More informationHIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS
BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side
More informationVC 104+ Rigid Grade / Rigid Grade Imagine VC 104 Rigid Grade Commercial Customised
Page 1 of 6 instructions VC 104+ Rigid Grade / VC 104+ Rigid Grade Imagine / (for the rest of this document referred to as VC 104) can be applied to new and used trucks and trailers with painted rigid
More informationMILMAN & ASSOCIATES STRUCTURAL CONSULTING ENGINEERS/ PROJECT MANAGERS
MILMAN & ASSOCIATES STRUCTURAL CONSULTING ENGINEERS/ PROJECT MANAGERS May 29, 2013 Revision B Structural Guideline for Design and Installation Holes in Composite Floor Slab Terminal 3, Departure Level
More informationINSTALLATION RECOMMENDATIONS. Outdoor Rubber Tiles
INSTALLATION RECOMMENDATIONS Outdoor Rubber Tiles Prior to Installation: The Outdoor Rubber Tiles and accessory transition pieces intended for this installation have been shipped to you via a freight carrier
More informationPassive Fire Protection
Firestopping Passive Fire Protection FS20 Firestop Compound 6 hour fire rated penetration seals for electrical and mechanical services FS20 Firestop Compound FS20 Firestop Compound is a Fire-Rated Penetration
More informationRESTORATION + DECORATION OF BALCONIES AND TERRACES. Decorative, Easy to Maintain and Slip-Resistant Surfaces
RESTORATION + DECORATION OF BALCONIES AND TERRACES Decorative, Easy to Maintain and Slip-Resistant Surfaces BALCONIES AND THEIR LOADS For that extra bit of pleasure, the Remmers Balcony and Terrace Programme
More informationBEST PRACTICE GUIDE. Fibrelime Premixed Universal Plaster and Render
BEST PRACTICE GUIDE Fibrelime Premixed Universal Plaster and Render Contents: Fibrelime description Fibrelime suitability Preparation before application Application Aftercare Painting General Recommended
More informationSaint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.)
Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.) Gyproc Plasters The cracks in cement sand plaster are an inherent feature which cannot be completely prevented but can only be controlled and
More informationMinor Cracks in Horizontal Surfaces
Cracks, chips and broken or flaking areas in concrete are not only unsightly, they can lead to further deterioration of the surface. The result is a costly replacement project as opposed to a simple repair.
More informationWATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced
More informationNEGATIVE SIDE WATERPROOFING SYSTEMS FOR MASONRY AND CONCRETE
NEGATIVE SIDE WATERPROOFING SYSTEMS FOR MASONRY AND CONCRETE What is negative side waterproofing? A typical case of negative side waterproofing is when water comes through the walls of a basement and the
More informationLow viscosity, solvent free elastic adhesive for wood flooring
Product Data Sheet Edition 25/06/2012 Identification no: 01 05 02 01 250 0 000009 SikaBond -54 54 Wood Floor Low viscosity, solvent free elastic adhesive for wood flooring Construction Product Description
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More informationSika Membran System For Sealing and Waterproofing Construction Gaps in Building Façades
Construction Sika For Sealing and Waterproofing Construction Gaps in Building Façades Waterproof and Airtight Flexible Seal Controlled Vapour Diffusion Bonds to any Building Substrate Prevents Interstitial
More information1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE
1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic
More informationUSER GUIDE Easier, Safer, Betta! www.gripsetbetta.com WATERPROOFING
USER GUIDE Easier, Safer, Betta! www.gripsetbetta.com WATERPROOFING Welcome to Gripset Betta, Over the past 3 decades through the tireless commitment to improve and enhance the way buildings are waterproofed,
More informationTest report P 7013-E. InoPaz H2O. Pazkar LTD. Alon Tavor Industrial Zone AFULA 18000 / Israel. J. Magner Dipl.-Ing. N. Machill.
Kiwa Polymer Institut GmbH Quellenstraße 3 65439 Flörsheim-Wicker Tel. +49 (0)61 45-5 97 10 Fax +49 (0)61 45-5 97 19 www.kiwa.de Test report P 7013-E Testing order: Test of the waterproofing system based
More informationARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials
ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials SECTION 03 92 50 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings,
More informationSC2000 CEMENT BONDING PROCEDURES
Pg.1 SC2000 CEMENT BONDING PROCEDURES Widely recognized as the world s finest cold vulcanizing cement REMA SC2000 is the solution to your industrial bonding problems. By using REMA UTR20 hardener with
More informationBaumit Renders for Porotherm Masonry. Application Guidelines. n Light and easy application n Tried and tested
Renders for Porotherm Masonry Application Guidelines n Light and easy application n Tried and tested Porotherm is a Wienerberger Group brand Ideas with a future Renders for Porotherm Masonry International
More informationpinta ACOUSTIC PANEL [1/7]
[1/7] Too much echo in the workplace? Staff unable to concentrate on their work? The answer is: ACOUSTIC PANEL. Service Call our telephone hotline for advice on your individual situation. Animated installation
More informationCORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS
AN ERGONARMOR COMPANY TECHNICAL INFORMATION SPECIFICATION FOR INSTALLATION 07/11 SUPERSEDES 04/00 PAGE 1 OF 6 CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS 1. SCOPE 1.1 This specification
More informationWATERPROOFING FOR CONCRETE STRUCTURES
MANUAL OF CONTRACT DOCUMENTS FOR ROAD WORKS VOLUME 1 SPECIFICATION FOR ROAD WORKS SERIES 2000 WATERPROOFING FOR CONCRETE STRUCTURES Contents Clause Title Page 2001 General 2 2002 Protection of Bridge Deck
More informationPanelTack HM. for the bonding of SVK Ornimat SKG 08.08.056.02
PanelTack HM for the bonding of SVK Ornimat Product Simson PanelTack HM is a moisture curing, elastic adhesive based on SMP (Silyl Modified Polymer). PanelTack HM is solvent- and isocyanate free. s Bonding
More informationCHESTERFLEX ROOF WATERPROOFING MEMBRANES
CI/SfB (47) Ln2 Chesterfelt Ltd CHESTERFLEX ROOF WATERPROOFING MEMBRANES Certificate No 94/3062 DETAIL SHEET 2 Product THIS DETAIL SHEET RELATES TO CHESTERFLEX ROOF WATERPROOFING MEMBRANES, POLYESTER REINFORCED
More informationWaterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries
Waterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries Introduction Wastewater of petrochemical industries and refineries contains high amounts of emulsified aliphatic or
More informationNEW ELECTRICAL SUBSTATION Building 300 SECTION 07 53 23 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK
ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING WORK PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within
More informationResurfacing Concrete. Page 1 of 5
Resurfacing Concrete Materials List QUIKRETE Concrete Resurfacer (No. 1131) (see calculator on page 5 for quantity needed) QUIKRETE Concrete and Stucco Wash (No. 8601) QUIKRETE Concrete Sealer (No. 8800)
More informationWaterproofing construction Joints
WaterproofingSystems Waterproofing construction Joints Area waterproofing Backing rod KÖSTER Joint Sealant FS-H KÖSTER FS Primer Contents Basics Connective, loadable and resilient: Joints in building construction
More informationELECTRIC PERISTALTIC MORTAR POINTING PUMP
ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground
More informationRead and understand all installation instructions and precautions before installing. GENERAL APPLICATION INSTRUCTIONS
AC TOPSEAL SELF-ADHERED, GRANULAR SURFACED, SINGLE PLY, LOW SLOPE ROLLED ROOFING 3 X 33.3 = 100 SQ. FT. 10 YEAR MATERIAL LIMITED WARRANTY For Use on Porches / Sheds / Utility Buildings / Accessory Buildings
More informationDIY GUIDE 10 EASY STEPS FOR TREATMENT OF RISING DAMP
DIY GUIDE 10 EASY STEPS FOR TREATMENT OF RISING DAMP CONTENTS WHAT IS RISING DAMP STEP 1 SURVEY STEP 2 METER READINGS STEP 3 CONCLUSION STEP 4 PREPARATION FOR TREATMENT STEP 5 TYPE OF TREATMENT STEP 6
More informationGigaCrete Specification PlasterMax
GigaCrete Inc. 6775 Speedway Blvd. Suite M105 Las Vegas, NV 89115 Ph (702) 643-6363 Fax (702) 643 1453 www.gigacrete.com GigaCrete Specification PlasterMax PlasterMax : Fire Rated Plaster for Direct Application
More informationInterior Walls below and above ground OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM
P r o d u c t a p p l i c a t i o n s a n d t e c h n i c a l i n f o r m a t i o n 2 below and above ground V OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM V The flexible, fast and cost-effective answer
More informationPanelTack. For the bonding of steni Colour type 7 façade panels. steni Colour 7. steni Colour 7
PanelTack For the bonding of steni type 7 façade panels Product Simson PanelTack is a moisture curing, highly elastic adhesive based on SMP (Silyl Modified Polymer). PanelTack is solvent- and isocyanate
More informationProduct Data Sheet ROCKPANEL Rockclad
Product Data Sheet ROCKPANEL Rockclad Durable - Xtreme - FS-Xtra United Kingdom 1 Product description ROCKPANEL boards are prefabricated compressed mineral wool boards with synthetic binders. The surface
More informationexternal Basement waterproofing
external Basement waterproofing Content External basement waterproofing Content 2 External Basement Waterproofing 3 What is positive side waterproofing? 3 KÖSTER Waterproofing Solutions The KÖSTER solutions
More informationBILL OF QUANTITY FOR THE WORK OF "REPAIRING OF CIVIL & PLUMBING WORKS INSIDE AND OUTSIDE OF THE WORKSHOP"
BILL OF QUANTITY FOR THE WORK OF "REPAIRING OF CIVIL & PLUMBING WORKS INSIDE AND OUTSIDE OF THE WORKSHOP" Sl. 1 DISMANTLING WORK 1.1 Stripping off worn out plaster (outside and inside) and raking out joints
More informationThe Kingspan Insulation Price List 1 st January 2013
Insulation The Kingspan Insulation Price List 1 st January 2013 FOR BUILDING FABRIC INSULATION, CAVITY CLOSERS AND MEMBRANES Visit our website: www.kingspaninsulation.co.uk Low Energy - Low Carbon Buildings
More informationHow To Test A Base Axe
Scotch-Weld DP760 Product Data Sheet Updated : February 2009 Supersedes: June 2001 Product Description DP760 epoxy adhesive is a non-sag, two-part room temperature curing adhesive designed for use when
More informationElastic, 1-part-polyurethane, liquid waterproofing membrane
Product Data Sheet Edition 15.04.2008 Revision no.: 1 Identification no: 01 07 02 03 002 0 000005 Sikalastic -450 Elastic, 1-part-polyurethane, liquid waterproofing membrane Construction Product Description
More informationDENSO WATERPROOFING SYSTEMS
DENSO WATERPROOFING SYSTEMS Approved Quality Management System AS/NZS ISO 9001:2008 Lloyds Register Certificate N o Mel 0927759 Denso (Australia) Pty Ltd A MEMBER OF WINN & COALES INTERNATIONAL 411 413
More informationEnergy Company Obligation (ECO): Technical Monitoring Questions
Energy Company Obligation (ECO) Technical Monitoring Questions v1 30/05/2013 Energy Company Obligation (ECO): Technical Monitoring Questions Under ECO suppliers are required to instruct suitably qualified
More informationexternal Basement waterproofing
external Basement waterproofing Content Content 2 External Basement Waterproofing 3 What is positive side waterproofing? 3 KÖSTER Waterproofing Solutions The KÖSTER solutions for positive side waterproofing
More informationDL CHEMICALS DECO SNJF PARAFILL PARQUET EXTERIOR TRANSPARENT STRUCTURE
EN DL CHEMICALS DECO SNJF PARAFILL PARQUET EXTERIOR TRANSPARENT STRUCTURE QUICKLY REPAINTABLE NON-CRACKING MATT REMAINS MATT EASY TO APPLY A quickly repaintable elastic sealant based on acrylic dispersion.
More informationBuilt-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5
Cl Sfb (27-9) Rn7 M2 December 2004 Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5 Fesco, Fesco S, Retrofit, Retrofit S, Fesco Fillet, PF,
More informationUSER GUIDE Easier, Safer, Betta! gripsetbetta.com WATERPROOFING
USER GUIDE Easier, Safer, Betta! WATERPROOFING INDEX Welcome to the Gripset Betta Range Over the past 3 decades through the tireless commitment to improve and enhance the way buildings are waterproofed,
More informationRIW SHEETSEAL 226 BENEFITS APPLICATIONS APPLIED TO. CI/SfB TN6 L6813. November 2013. l Water and water vapour barrier. l Factory controlled thickness
CI/SfB TN6 L6813 November 2013 RIW SHEETSEAL 226 is a cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Primer is
More informationHigh Performance Building Materials SCREEDS REPAIR MORTARS LEVELLING & SMOOTHING WATERPROOFING TILE ADHESIVES & GROUTS PRIMERS & ADDITIVES
High Performance Building Materials SCREEDS REPAIR MORTARS LEVELLING & SMOOTHING WATERPROOFING TILE ADHESIVES & GROUTS PRIMERS & ADDITIVES ARDEX manufacture a complete range of high performance building
More informationConcrete Resurfacing. System Guide. by Parchem Construction Supplies
Concrete Resurfacing System Guide by Parchem Construction Supplies Resurfacing Spray-on resurfacing is a 2-3mm topping applied to structurally sound concrete surfaces that are at least 28 days old. Resurfacing
More informationScotch-Weld TM. DP410 Off-White. Product Data Sheet. Product Description. Key Features Rapid cure at room temperature; cure rate may be accelerated
Scotch-Weld TM Product Data Sheet DP410 Off-White Supersedes: October 2001 Product Description DP410 epoxy adhesive is a low flow, two-part epoxy based structural adhesive. It is designed for use where
More informationSurface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment Whatever You Rebuild, Repair and Protect...... Find the Right Solution! Henkel's Solutions for all Surface Engineering Needs
More informationSECTION 07560 FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE)
SECTION 07560 FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE) PART 1 GENERAL 1.1 DESCRIPTION 1. Fluid applied flexible acrylic waterproofing system over concrete. This work shall include the
More informationLAMA has developed over the years a wide range of products that can be used in the waterproofing
LAMA has developed over the years a wide range of products that can be used in the waterproofing and damp-proofing of roofs, decks, car parkings, walls, foundations, basements, roads, etc. In this catalogue,
More informationApproved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 27 C calculated IED (2010/75/EU) (calculated)
Approved 402;2521 1 2521 zinc epoxy ^(ValidationDate). 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms
More informationChimney systems ICOPAL WULKAN C/CI/C-eko/CI-eko
INSTALLATION MANUAL Chimney systems ICOPAL WULKAN C/CI/C-eko/CI-eko Ventilated Notified entity Building Technical and Research Institute Prague notification no. 1020 This instruction refers to double-layer
More informationDubai Municipality Standard DMS 1: Part 5: 2004
Specification for precast concrete blocks Part 5: Normal-weight concrete-polystyrene sandwich masonry blocks Issue Date Revision Revision Description Prepared by Approved by Authorized by 19/12/2004 Issue
More informationInstallation System. Existing Resilient Sheet Floors
Vinyl Composition Tile Installation System Product Adhesive/Full Spread Adhesive/Tile-On Comment Imperial Texture MultiColor RAVE Stonetex Companion Square Feature Tile/Strips ARTEFFECTS SAFETY ZONE Vinyl
More informationSTANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES
ROOFING APPLICATION STANDARD (RAS) No. 117 STANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES Scope 1.1.
More informationFlocking of textiles. Flocked shirt 13. flocking drying cleaning. adhesive. application. creation
Flocking of textiles > The motif flocking is the high-class alternative to textile printing. One not only flocks sports wear for schools, sport clubs, associations etc., but also fabrics for garments,
More informationProfiles for floors of same height Cerfix Projoint
PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 (0)49 8878411 +39 (0)49 8878412 FAX. +39 (0)49-706692 EMAIL: INFO@PROFILPAS.COM s for floors of same height Cerfix Projoint Application
More informationBLACK JACK ALL WEATHER ROOF COATING
PAGE: 1 of 6 PRINT DATE: 16/09/2004 BLACK JACK ALL WEATHER ROOF COATING DESCRIPTION BLACK JACK ALL WEATHER ROOF COATING is a solvent based, full bodied black brushable compound with added fibres for reinforcement.
More informationVinyl Composition Tile Installation System
Vinyl Composition Tile Installation System Product Gauge Size Vinyl No-Wax (Dry Back) Urethane No-Wax (Dry Back) 0.045" (1.1 mm) 0.080" (2.0 mm) IMPERIAL TEXTURE 0.094" (2.4 mm) STONETEX ChromaSpin COMPANION
More informationG4 is browny translucent in colour and is effected by UV light. Therefore it is for internal use unless top coated to protect it from UV light
G4 Damp Seal is a polyurethane that hardens with moisture. It is browny tranclucent in colour. G4 provides a tough, highly durable non-porous seal on most porous materials. Since G4 is hardened by moisture
More informationSECTION 07550 - MODIFIED BITUMINOUS MEMBRANE ROOFING. A. Vapor barrier (base ply); cover board at existing roof deck.
SECTION 07550 - PART I GENERAL 1.01 SECTION INCLUDES A. Vapor barrier (base ply); cover board at existing roof deck. B. Roof insulation at new roof deck. C. Modified bitumen membrane. D. Fluid applied
More informationSection 5.0. Basements. Wall insulated externally. Wall insulated internally. Ba02. Product: Polyfoam ECO Floorboard Ba01.
Section 5.0 Basements Wall insulated externally Product: Polyfoam ECO Ba01 Wall insulated internally Product: Polyfoam ECO Ba02 Basements Basements Basement design Waterproofing BS 8102: 2009 Code of practice
More informationFERMACELL Powerpanel H 2 O for Wet & Moisture affected areas
FERMACELL Powerpanel H 2 O for Wet & Moisture affected areas Powerpanel H 2 O is a cement based board from FERMACELL. Board Characteristics Board Thickness 12.5 mm Board Sizes 1000 x 1200 mm 50 sheets/pallet
More informationK2 STONE NATURAL VENEER
INTRODUCTION WHAT IS K2 NATURAL THINSTONE VENEER? Natural K2 Stone veneer is real stone, cut 1 inch thick, making it light enough to be installed as a veneer. Sometimes referred to as thin veneer, thin
More informationLAYING BLOCK AND BRICK
LAYING BLOCK AND BRICK Products highlighted in this section: SAKRETE Type N Mortar Mix SAKRETE Type S Mortar Mix Brick And Block Laying Basics The first step in building a brick or block wall is to construct
More informationBENTLEY ELEMENTS COLLECTION LVT
This document refers to the following products: Product Size Installation direction Seams treatment Elements Tiles See specifications 90 None Elements Planks See specifications Stair Step None Note: This
More informationSPREFIX SPRAY INSULATION _ in the marine market.
SPREFIX SPRAY INSULATION _ in the marine market. A self-adhesive glass or stone wool, sprayed directly onto surface.. Easily applied to wood, steel, plastic or other surfaces without any mechanical fasteners
More informationImproving the flood resistance of your home. Advice sheet 4: Flood-resilient walls.
Improving the flood resistance of your home Advice sheet 4: Flood-resilient walls. This sheet provides guidance on identifying different types of wall, and reducing the flow of floodwater through them
More informationTECHNICAL DATA SHEET. TOPECA, Lda Rua do Mosqueiro 2490 115 Cercal Ourém PORTUGAL. Tel.: 00 351 249 580 070 Fax.: 00 351 249 580 079
TECHNICAL DATA SHEET TOPECA, Lda Rua do Mosqueiro 2490 115 Cercal Ourém PORTUGAL Tel.: 00 351 249 580 070 Fax.: 00 351 249 580 079 geral@ topeca. pt www.topeca.pt juntaemcor plus+ Pág. 2 Sanded texture
More informationINTERIOR WALLS AND BASEMENTS CHOOSING THE RIGHT MEMBRANE FOR INTERIOR WALLS. Multi-Layer Technology provides increased strength.
INTERIOR WALLS AND BASEMENTS CHOOSING THE RIGHT MEMBRANE FOR INTERIOR WALLS Multi-Layer Technology provides increased strength. Specifically designed for interior applications. Compatible with most internal
More informationCarpet Tile Installation Guidelines
NOTICE FAILURE TO FOLLOW THESE GUIDELINES CAN RESULT IN VOIDING THE CARPET WARRANTY. Installation Guidelines The following instructions should be reviewed prior to installation. Shaw Industries will not
More informationSTAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM Installed in Pre-engineered Steel Buildings Provides Lowest Cost Construction Method for CORROSIVE AND WET Environments PREFERRED SOLUTIONS, INC.
More informationPRODUCT DESCRIPTION 29/08/2014
29/08/2014 PRODUCT DESCRIPTION Quartz Carpet is a seamless flooring system based on coloured or uncoloured quartz grains that are bonded with resin (epoxy or polyurethane). This system is used for houses,
More informationSIKA BRIDGE DECK WATERPROOFING SYSTEM SIKALASTIC -851 BRIDGE DECK WATERPROOFING SYSTEM
H A P A S Sika Services AG Speckstrasse 22 8330 Pfäffikon Switzerland Tel: +49 (0)711 8009-0 Fax: +49 (0)711 8009-1251 e-mail: uebelhoer.dirk@de.sika.com website: www.sika.com SIKA BRIDGE DECK WATERPROOFING
More informationTHE MINISTRY OF ENVIRONMENTAL PROTECTION, PHYSICAL PLANNING AND CONSTRUCTION
THE MINISTRY OF ENVIRONMENTAL PROTECTION, PHYSICAL PLANNING AND CONSTRUCTION 1389 Pursuant to Article 104 paragraph 1 item 4 of the Waste Act (Official Gazette 178/04, 111/06), the Minister of Environmental
More information