R&D SERVICE. OEM WELCOME.

Transcription

1 PRODUCT CATALOG

2 R&D SERVICE. OEM WELCOME. ELDES specializes in designing and manufacturing GSM Machine to Machine (M2M) equipment. If you need a specific project or product that works over GSM network do not hesitate to contact us. We are here to meet your needs. GSM CONTROL SYSTEMS CUSTOMIZED BY YOU

3 CONTENT GSM DIALERS-PAGERS AND GATE OPENERS GSM GATE CONTROLLER ESIM GSM AUTO DIALLER AND REMOTE RELAY ESIM ALARM AND CONTROL PANELS GSM ALARM AND CONTROL PANEL ESIM GSM ALARM AND CONTROL PANEL ESIM GSM ALARM SYSTEM EPIR...7 GSM PAGER FOR CARS ZEUS...7 GSM GATEWAY ET GSM GATEWAY ET07P...8 KEYPAD EKB1...9 KEYPAD EKB2...9 PLASTIC ENCLOSURE ED1 FOR IBUTTON READER...9 AUDIO OUTPUT MODULE EA AUDIO AMPLIFIER MODULE EA HARDWIRED ZONE EXPANSION EPGM HARDWIRED PROGRAMMABLE OUTPUT EXPANSION EPGM WIRELESS TRANSMITTER EWT WIRELESS EXPANSION MODULE EW WIRELESS EXPANSION MODULE EW WIRELESS PIR SENSOR EWP WIRELESS MAGNETIC DOOR/WINDOW SENSOR EWD MONITORING STATION SOFTWARE IP RECEIVER SOFTWARE EGR CENTRAL MONITORING STATION SOFTWARE E-GUARD...12 ETHERNET SNMP CONTROLLERS I/O ETHERNET CONTROLLER ELAN GSM/GPS TRACKING BUSINESS GSM TRACKER TOBECITY...14 GPS TRACKER TOBE...14 PRODUCT CATALOG 3

4 GSM GATE (REMOTE RELAY) CONTROLLER ESIM010 ESIM010 automatic gate controller (remote relay over GSM) is used to open gates, lifts road barriers or turn on electronic devices remotely over GSM network. Calling on the number of the SIM card inserted in ESIM010 the system checks if the number of the caller is recorded in the memory. If the number exists in the database the system rejects the call and turns on the relay for the pre-set period. Barrier control Gate control Computer system restart Built-in GSM/GPRS communicator The system can be controlled by up to 500 users and 5 administrators Notification SMS about a fault in gate or other automatics device over GSM Din-Rail plastic enclosure Optional IP65 enclosure 3 ways of configuration: SMS, USB or Internet Event Log access by Internet Inputs 3 Relay output 1 (1 A) Event Buffer 1000 Built in GSM/GPRS module Administrators 5 Authorized users 900/1800/1900 MHz; 850 MHz optional 500 (up to 2000 optional) GSM AUTO DIALLER AND REMOTE RELAY ESIM151 The main function of the ESIM151 is to operate as a supplement for any of the control panels. If PGM or Bell are activated, a warning call is dialled and SMS message is sent to the pre-set phone numbers. It can remotely control any electric equipment switching by a free of charge short call. Informing about a triggered alarm system to a mobile phone Heating system switching Any electronic device failure or restore informing via SMS/CALL Lighting switching Built-in GSM/GPRS communicator Each input could be assigned to a separate user SMS and/or CALLS to 5 authorized users Optional Din-Rail plastic enclosure 3 ways of configuration: SMS, USB or Internet Event Log access by Internet Inputs 5 Relay output 1 (1 A) Event Buffer 1000 Built in GSM/GPRS module 900/1800/1900 MHz; 850 MHz optional Authorized users 5 Microphone connector 4 GSM DIALERS-PAGERS AND GATE OPENERS

5 GSM ALARM AND CONTROL PANEL ESIM264 ESIM264 is an Alarm and Control Panel for securing premises and controlling electronic devices or managing buildings/automatics through GSM network. The panel can work as a personal alarm system just informing authorized users via SMS/CALL or can communicate with the monitoring station. Security of premises Control of electrical devices by SMS Temperature measurement and control Electric power network failure control Wireless intercom Arm/disarm by free of charge call, keypad or ibutton Built-in GSM/GPRS communicator SMS and/or CALLS to 5 authorized users Each zone can be assigned to a separate user CONTACT ID for monitoring station through GSM voice or GPRS Easily transformable to 868MHz wireless alarm panel Temperature measurement and alarming in case of controlled temperature deviating from the allowable limits STAY feature Intercom extension module 4 ways of configuration: SMS, keypad, USB or Internet Event Log access by Internet On-board zones 6 (12 ATZ mode) Expandable hardwired zones 16 Wireless Optional Expandable wireless devices: (zones, PGM, key fobs, etc.) 16 Keypads 4 Keypad zone support Partitions 2 User codes 50 Dallas key ibutton reader On-board programmable outputs 4x500mA Expandable programmable outputs 8x500mA Event Buffer 500 Built in GSM/GPRS module 900/850/1800/1900 MHz Ways of event communication Ademco Contact ID, SMS, Voice Calls Authorized users 5 Digital temperature sensor DS18S20, DS18B20 Microphone Audio OUT ALARM AND CONTROL PANELS 5

6 GSM ALARM AND CONTROL PANEL ESIM262 ESIM262 is an Alarm and Control Panel for securing premises and controlling electronic devices or managing buildings/automatics through GSM network. The panel informs authorized users via SMS/CALL about triggered zones. Security of premises Electrical devices control by SMS Temperature measurement and control Electric power network failure control Wireless intercom Arm/disarm by free of charge call, keypad or ibutton Built-in GSM communicator SMS and/or CALLS to 5 authorized users Temperature measurement and alarming in case of controlled temperature deviating from the allowable limits STAY feature Intercom extension module 3 ways of configuration: SMS, keypad, USB. On-board zones 6 (12 ATZ mode) Keypads 1 Partitions 1 User codes 1 Dallas key ibutton reader On-board programmable outputs 2x150mA Expandable programmable outputs 8x500mA Event Buffer 128 Built in GSM/GPRS module 900/1800/1900 MHz; 850MHz optional Ways of event communication SMS, Voice Calls Authorized users 5 Digital temperature sensor DS18S20, DS18B20 Microphone Audio OUT 6 ALARM AND CONTROL PANELS

7 GSM ALARM SYSTEM EPIR Home alarm EPIR is a self-install system for end users. The whole system looks like a simple PIR. All you need to do is to simply insert SIM card and enter phone numbers of authorized users. In case of trespass EPIR sends SMS to authorized numbers and calls. It possesses an implemented Contact ID for monitoring stations. Security of premises Electric power network failure control Spy listening Self-install system Arm/disarm by free of charge call Built-in GSM/GPRS communicator SMS and/or CALLS to 5 authorized users CONTACT ID for monitoring station through GSM voice or GPRS Optional 868 MHz ELDES WIRELESS version Built in microphone and backup battery 3 ways of configuration: SMS, USB or Internet Event Log access by Internet On-board zones 1 Wireless Expandable wireless devices: (zones, PGM, key fobs, etc.) Optional 16 Event Buffer 500 Built in GSM/GPRS module Ways of event communication Authorized users 5 Microphone Backup battery Detection angle and range 900/1800/1900 MHz; 850 MHz optional Ademco Contact ID, SMS, Voice Calls Yes, built-in 90 up to 10 m GSM PAGER FOR CARS ZEUS The system ZEUS is a device used to remotely observe and control cars, motorbikes and other vehicles over GSM network. Informing the user by an SMS message or phone call about the triggered security system of the vehicle. Informing the user about low battery Listening to what is happening inside the car through a remote microphone A possibility to check over the mobile phone if you have not forgotten turning on the security system. CELL ID vehicle tracking Emergency Button connection Built-in GSM communicator SMS and/or CALLS to 2 authorized users Back-up battery included Number of high level (positive) inputs 1 Number of low level (negative) inputs 2 Security mode activation at low level (with a negative) 1 input Security mode activation at high level (with a positive) 1 input Built in GSM/GPRS module 900/1800/1900 MHz; 850 MHz optional Authorized users 2 Built in microphone ALARM AND CONTROL PANELS 7

8 GSM GATEWAY ET07 ET07 is used for transferring information from the Alarm Control Panel to the monitoring station via GSM voice connection channel where no land line is available. Alarm communication Making and receiving normal telephone handset calls via GSM voice connection channel Lift intercoms Replacing PSTN line to GSM network Transmits information from the Alarm Control Panel to the monitoring station via GSM voice connection signal Transmits information from the Alarm Control Panel only to the registered users via SMS message Transmits information from the Alarm Control Panel to the monitoring station via GSM voice connection signal as well as to registered users via SMS message. Built in GSM module 900/1800/1900 MHz; 850 MHz optional Authorized users 5 Supported protocols Contact ID, 4+2, SIA Inputs 3 (optional) Generated phone line voltage 48 V Power supply voltage V AC/DC GSM GATEWAY ET07P ET07P is a cost-reduced solution for enterprises when calling from fixed line to GSM network. When connected to PBX it cuts the costs of an enterprise for the fixed line. Alarm communication To make and receive normal telephone handset calls via GSM voice connection channel Lift intercoms Replacing PSTN line to GSM network Built-in GSM communicator Compatible with PBX Plastic enclosure Simply plug the telephone plug into RJ11 jack. No configuration needed Built in GSM module RJ11 connector Ringing voltage of generated phone line Dial tone of generated phone line 900/1800/1900 MHz; 850 MHz optional ± 72 V (25 Hz) 350 Hz Generated phone line voltage 48 V Power supply voltage V AC/DC 8 ALARM AND CONTROL PANELS

9 USER INTERFACE KEYPAD EKB1 Large buttons ARM, STAY, BYPASS LED Backlit buttons Buttons indicate triggered zones Easy-to-install Compatible with ESIM262, ESIM264 panels KEYPAD EKB2 Modern design Touch sensitive buttons LCD display Easy-to-install Compatible with ESIM264 panel PLASTIC ENCLOSURE ED1 FOR IBUTTON READER AND TEMPERATURE SENSOR Enclosure for easy installation of ibutton reader Built-in buzzer Temperature Sensor DS18S20 (-55 C to +125 C) ALARM AND CONTROL PANELS 9

10 AUDIO MODULES AUDIO OUTPUT MODULE EA1 3.5 mm headphone jack Possibility to connect headphones or computer speakers. AUDIO AMPLIFIER MODULE EA2 1 W 8 Om For Intercoms, Lifts ZONE AND PGM EXPANSION MODULES HARDWIRED ZONE EXPANSION EPGM1 16 hardwired zones 2 programmable outputs 500 ma Compatible with ESIM264 HARDWIRED PROGRAMMABLE OUTPUT EXPANSION EPGM8 8 programmable outputs 500 ma 1 A Compatible with ESIM264, ESIM ALARM AND CONTROL PANELS

11 868 MHZ WIRELESS MODULES WIRELESS TRANSMITTER EWT1 Supports up to 16 wireless devices: PIR, Zones, PGM, Key fobs, etc. Compatible with ESIM264 panel WIRELESS EXPANSION MODULE EW1 2 zones 2 programmable outputs 500 ma Expansion for any not wireless device such as Bell, Motion or Smoke detector Compatible with ELDES WIRELESS WIRELESS EXPANSION MODULE EW2 4 zones 6 programmable outputs 500 ma 1 programmable relay output 1 A Mates with EW1 Recommended for Gate control or automatic devices. Compatible with ELDES WIRELESS WIRELESS PIR SENSOR EWP1 Digital motion detector Indoor Viewing angle 90 up to 10 m Compatible with ELDES WIRELESS WIRELESS MAGNETIC DOOR/WINDOW SENSOR EWD1 Monitor doors, windows Compatible with ELDES WIRELESS ALARM AND CONTROL PANELS 11

12 IP RECEIVER SOFTWARE EGR100 EGR100 receives information from ELDES control panels via GPRS and converts it to the popular MLR2 format used by monitoring stations. All you have to do is simply install the program to a PC that has access to Internet. EGR100 creates a virtual COM port and transfers all alarm data received from alarm control panels. Freeware! Easy upgrade of an existing telephone-line Central Monitoring Stations to GPRS based communication. Compatible with MLR2 receivers of central monitor stations. You will need a PC with Windows XP, VISTA Up to users Encrypted transmission Configurable PING signal timeout Event LOG buffer CENTRAL MONITORING STATION SOFTWARE E-GUARD E-Guard is powerful database software for CMS operators. It has everything that an organisation can need, from small to large security companies. The software interprets and records alarm data obtained from various receivers. Developed and tested by real working monitoring station company Compatible with Surgard MLR2 protocol Simultaneously supports as many alarm receivers as you need. Up to 256 COM ports. You will need a PC with Windows XP, VISTA 100; 300; 500; 1000 and user packages Program has the following functional windows: Main, Object Card, Object Status, Problems, Control Panel Failure, Reminder, Records, Diagnostic etc. Event LOG buffer 12 MONITORING STATION SOFTWARE

13 I/O ETHERNET CONTROLLER ELAN1 ELAN1 allows managing the inputs and outputs of any network device via SNMP Protocol. Process automation control Building automation monitoring Lift monitoring Monitoring electricity power transmission systems Super price/performance SNMP - Simple Network Management Protocol 4 analogic/digital input 1 output Easy web configuration built-in WEB server Aluminium enclosure Ethernet connection 10/100BaseT Ethernet port Inputs 4 (0-10 V or 4-20 ma) Output 1 (150 ma ) Status LEDs 3 Power supply voltage V AC/DC Dimensions 82x55x25mm ETHERNET SNMP CONTROLLERS 13

14 GSM TRACKER TOBECITY TobeCity is a device that works with TOBE LBS software platform or some other CELL ID search engines and defines position using Cell Towers instead of GPS information. TobeCity - simple way to get into mass market! Child tracking Employee tracking Pet tracking Luggage tracking Small in size 40x40x15 mm Compatible with LBS* 5 days battery life GPS TRACKER TOBE Personal GPS/GSM/GPRS tracker built to grow sense of safety in the society. Child safety Elder people care Employee safety/control Pets safety GPS module GSM/GPRS data communication Voice communication Small size Adopted to Tobe software server platform** Customization for any server available GPS GPS ANTENNA GSM BUILT IN MICROPHONE CONNECTION TO PC CONFIGURATION BATTERY CHARGER DIMENSIONS WEIGHT COLOUR STAND BY -161 dbm Internal 900/850/1800/1900 MHz Yes Mini USB via server Li-Ion (780 mah) Mini USB 69.5x50.5x21 80 g White Up to 5 days * TOBE Location-based service (LBS) software is the most competitive on market in terms of functionality and price. We can offer competetive price. ** Software for GPS tracking business TOBE DO NOT HESITATE ASK FOR MORE INFORMATION NOW If you read this at your place now and want to get more information take the following steps: 1. Go to 2. Find contacts 3. Send us an or make a call 14 GSM/GPS TRACKING BUSINESS

15 YOUR IDEA + ELDES R&D = SUCCESS

16 REPRESENTATIVE