1 PiSector GSM Cellular Wireless Alarm System User Manual ( GS08 ) Read manual fully before use. PiSector Inc., USA,
2 Welcome to PiSECTOR Thank you for choosing PiSECTOR. Everyone at PiSECTOR is committed to giving you the best home security available today and we want you to know that we take the safety of your home and family seriously! PiSECTOR was first developed a personal monitoring system to have state-of-the art home protection at an affordable cost and now we're one of the fastest-growing security companies in the industry. PiSECTOR offers you the Ademco Protocol Security System. We've put complete control of your security system in your hands anytime, from anywhere in the world. PiSECTOR allows you to instantly arm and disarm your system, change your system settings, find out your home security system s status and so much more. We encourage you to change the default password as soon as you get your system set up. You won't find anything like PiSECTOR at any of those other security companies with all the functions we designed for you at an affordable price. This guide will walk you through the easy set up of your PiSECTOR system no matter which one you ordered. We've started with already customizing and tuning your system to your specifications, so everything is ready to go when you open the box. As soon as you're done, be sure you register with PiSECTOR.com for any tech support in the future. Again, thank you for being a PiSECTOR customer. We're doing everything we can to make sure your home and family is safe. Sincerely PiSector Inc.
3 System Components Console Panel Program: press this key then input password, you can enter program status (default password ) Arm: press this key and input password, you can activate your system as Away from home Disarm: press this key and input password, you can deactivate your system Chime: press this key you will see icon on LCD screen, that means you have enabled your Chime function, ( to make it work if you go to Sensor-Edit and set your door sensor for Chime zone as Yes, you will hear a music bell sounds when you open your door) Home: press this key and input password, you can active your system as Stay Home( if you go to Sensor- Edit and set part of sensors for Home zone as No, when you press Home, that sensor will disable, and all other sensors still enable) Emergency: press this key and it will trigger your alarm system 24/7 anytime regardless of your system is armed or disarmed. TALK/END: You can input your phone number directly then press this key to make a call or end a calling (only work with SIM card) Scroll Key: press this key to page up and down to move and select menu list for functions, you also can use this key to find last 30 alarm events during System Disarm Status. Function keys: Search: when you see an icon display on LCD screen, you can press Search to find existing events Back: use to exit the last step during programing Enter: for confirm your information Mute: to quiet the entire key sounds Vol+/Vol-: for adjusting the consoles sound volumes Connect console Panel: Put the console near your phone cord Remove the table stand and cover on back side of console Remove the SIM card cover SIM Card Slot: Please pay attention to the direction arrow marked on the slot: LOCK / OPEN. DO NOT insert or take out the SIM card when the main unit console panel is powered on. (Option) Connect the phone cord to LINE Port on back of console.
4 Connect the regular telephone device to TEL port on back of console. Route the phone cord through the channel toward the side of the console (if you have no landline, you can use OBi110/ MagicJack / Vonage / Ooma VoIP service to connect your internet Router / Modem then connect console to the VoIP device ) if you use landline, priority call by landline, then GSM SIM card. Note: If you use only landline, you cannot dial out through main console direct, you need use your home phone to dial out or receiving call, system will auto dial out if alarming, but if you use GSM SIM card, you can use the main base as telephone, you are able to dial out or receive call from main base directly. Connect the power adapter to POWER port on back of console Route the power adapter ( 12V 1A ) cord through the channel toward the side of the console Plug the power adapter into nearby electrical wall outlet that is not controlled by a switch Keep the Battery Switch at ON position for internal battery backup charging. Wired Port - Function interface of the main unit 1 GND Ground 2 Z3 Wired sensor 1: support both NO and NC (Auto create Zone 49) 3 GND Ground 4 Z4 Wired sensor 2: support both NO and NC (Auto create Zone 50) 5 GND Ground 6 +12V DC 12V Positive Wired in Keychain Remote Press to Arm / Activate your system as Away from home Press to Disarm/ Deactivate your system when you come back home Press to Home arm /Active your system as Stay Home( if you go to Sensor-Edit and set part of sensors for Home zone as No, when you press Home, that sensor will disable, and all other sensors still enable) Press this key you will see icon on LCD screen, that means you have enabled your Chime function, ( to make it work if you go to Sensor-Edit and set your door sensor for Chime zone as Yes, you will hear a music bell sounds when you open your door), press once to enable, press once again to disable. Press once for "silent emergency alarm mode. This allows you to call for help silently when someone threatens your life without triggering the siren and alerting the invader. If you press and hold for 3 seconds, the siren will start sounding loudly in emergency alarm mode. Program Remote Keychain: If you received a pre-programed system kit, please ignore this step and do not program it again. Press PROGRAM button on console, enter the default password Select Remote Controllers then press Enter on console you will see below list. Add Select Add press Enter, then you will see Trigger Controller Code, press any button on your remote Keychain. Nine digits will appear on console screen for 1-2 seconds. This is the unique address for this keychain. The console will
5 request you add an owner name for this remote. Input a name for this remote and then press SAVE. You will see Record owner Name, then press Enter and record a voice for this remote keychain. Note: Each time you press Add, follow steps above. You can add one remote and a maximum of 8 Keychain Remotes. Edit select Edit press Enter to find the name of remote then press Enter you can edit the remote keychain name or record a voice for the remote keychain. Delete select Delete and press Enter, you can find all your remote names to delete one or all remote keychains if you want to remove the remote keychain from console panel. Delayed Arm If you select Delayed Arm and press Enter, then set Yes, it will give you 60 seconds to leave the house. Default is set Delay as Yes. It gives you 60 seconds to leave the house when you do arm system by remote keychains. (You can change this time using System Settings menu, under Arm delay time) Program and Mount Bracket Door/Window Sensors If you received a pre-programed system kit, please ignore this step and do not program it again. All new Door/Window sensors you need should be programmed to your console. Open the cover and remove the insulated paper then close the cover. Put small magnet next to sensor Press PROGRAM button on console, enter the default password Use Scroll key to choose Sensor then press Enter on Console. Add press Enter again, then you will see Trigger Sensor / Code. Trigger your sensor by moving the small magnet away from the large transmitter. Then console will request you to add a Zone Name for this sensor. Input a name for this sensor, then press SAVE. You will see Record Sensor Name, press Enter record your own voice for this sensor. You will hear this voice when you get alarming calls. Note: Each time you press Add, follow above steps.you can add from one up to fifty sensors. Edit select it then press Enter, you can use Auto search or Manual search to find your target sensor and high light it then press Enter to Edit Sensor Functions as below list Note: if you don t know sensor name then choose Auto Search, when you trigger an individual sensor and its name will be displayed on the console panel. Select the sensor name and press Enter, then you will see the menu displays as below: (MAKE SURE ONLY ONE SENSOR IS TRIGGERED EACHTIME TO AVOID ANY ACCIDENTAL TRIGGERING OF A DIFFERENT SENSOR. PLEASE KEEP ALL YOUR MOTION SENSORS IN DIFFERENT ROOMS, AND MAKE SURE THAT ALL WINDOW/DOOR SENSORS MAGNET PARTS ARE ATTACHED TO LARGER PARTS AS CLOSE STATUS.) Edit Zone Name: Highlight Edit Zone name, press Enter and you will be able to rename the sensor. Record Zone Name: Highlight it press Enter, select Record, you are able to record 5 seconds of your own voice accordingly. If recording a sensor name in your own voice to identify a sensor, when you receive an alarming call on your cell phone or any other phones, you will hear the sensor name. Emergency Zone Highlight it press Enter, Default is NO, (If you set YES, the zone will be on 24hours, regardless of your system s Arm or Disarm status. This is recommended to be used for smoke detector, panic button, water leak sensor and temperature sensors only. DONOT set any door sensor or motion sensor as Emergency zone). Home Zone Highlight it press Enter, Default is YES, ( if you select NO, the zone will disable during home alarm status, recommended for motion sensor NO, and all Window/door sensor YES) Chime Zone Highlight it press Enter, Default is NO,( if you set as YES, the zone will alert you as a bell during disarm and home
6 alarm status, use for door only) Delayed Zone Highlight it press Enter, Default is NO, (if set YES, allows you to come back home and open the door without triggering the system. System default delay alarm time is 45 seconds. You can change this time by going to "System Settings" and set the Alarm Delay time). Siren Enable Highlight it press Enter, Default is YES, (if set NO, siren will disable when this zone triggered, no siren alarm will sound.) Note: All zones are instant zones by Default.( Instant refers to the system being immediately armed if any zone is triggered when the system is in armed status.) Delete select it then press Enter, you can find the target sensor and delete it, you can delete any sensor from console panel. NOTE: After programming all sensors to your console, please test each sensor before you mount the sensor to the appropriate location. DO NOT close the door fast then one second during testing, open door and waiting 1-2 seconds when you see sensor light off then close the door, otherwise the console may only receive door open signal and not detect the door close signal then shows the door is opening on LCD screen. Place each sensor in the appropriate location. Note: If possible, place the bracket on the stationary frame of door or window, and place the magnet on the door or window itself. You may apply super glue on the surface of window/door before use 3M tape stick. Various orientations between the Bracket and Magnet may be used as long as 3/4" distance is not exceeded. See Example in Figures 1-4 NOTE: SPACERS IN BOTTOM TRAY MAY BE USED ON THE BRACKET OR MAGNET TO ADJUST ALIGNMENT Once you have determined the appropriate location and orientation for the Bracket and Magnet, attach them with double-sided tape (the Magnet Space and Bracket Space are optional; only apply when your door/window gap is big or very low)
7 Program and Mount Motion Sensors: Prepare Motion Sensor A. Separate the front and back covers of the Motion Sensor by pressing the tab with your finger or the top of a pen (Figure A and B). B. Remove insulating paper from the battery and CLOSE the cover. The sensor needs 1-3 minutes to initialize itself. You will see a red indicator blink once every 3 seconds during initialization. If you don't see the indicator blink as described during initialization, please open the cover, remove the battery and reinstall the battery again until you see the indicator flash as described. The sensor will be ready for use when the indicator stops blinking. (Note: DO NOT keep the cover open since it may effect the sensor during initialization and cause the sensor to not work properly after) C. 1 switch for battery notification, Default is set to ON. OFF position disables the low battery notification. 2 switch for LED signal light. The default is set to on, but if you do not want a flashing light when the sensor detects an intruder, you can turn it off. When the battery is low, the LED light becomes yellow. Motion sensor sensitivity adjustment A = Switch 2 B =Switch 1 Low sensitivity: Switch 2 at ON position and Switch 1 at OFF position Medium Sensitivity: Switch 2 at ON position and Switch 1 at OFF position High Sensitivity (Default): Switch 2 at ON position and Switch 1 at ON position Program the Motion Sensor ( only for DIY kit or add new sensors) If you received a pre-programed system kit, please ignore this step and do not program it again. Before programming any sensor, you need to switch off all your existing sensors and disarm your system. Press PROGRAM button on console and enter the default password Use Scroll key to choose Sensor then press Enter on Console. Add Edit press Enter you will see Trigger sensor /Code, then walking 2-3 steps in front of The Motion Sensor which you have prepared and you will see nine digits displayed on console screen for 1-2 seconds. This is the unique address for this sensor. The Console will request you add a Zone Name for this sensor, then press SAVE. You will see Record Sensor Name, then press Enter and record a voice for this senso. (MAKE SURE ONLY ONE SENSOR IS TRIGGERED EACHTIME TO AVOID ANY ACCIDENTAL TRIGGERING OF A DIFFERENT SENSOR. PLEASE KEEP ALL YOUR MOTION SENSORS IN DIFFERENT ROOMS, AND MAKE SURE THAT ALL WINDOW/DOOR SENSORS MAGNET PARTS ARE ATTACHED TO LARGER PARTS AS CLOSE STATUS.) select it then press Enter, you can use Auto search or Manual search to find your target sensor and high light it then press Enter to Edit Sensor Functions as below menu list Note: if you don t know sensor name then choose Auto Search, when you trigger an individual sensor and its name will be displayed on the console panel. Select the sensor name and press Enter, then you will see the menu displays as below: (MAKE SURE ONLY ONE SENSOR IS TRIGGERED EACHTIME TO AVOID ANY ACCIDENTAL TRIGGERING OF A DIFFERENT SENSOR. PLEASE KEEP ALL YOUR MOTION SENSORS IN DIFFERENT ROOMS, AND MAKE SURE THAT ALL WINDOW/DOOR SENSORS MAGNET PARTS ARE ATTACHED TO LARGER PARTS AS CLOSE STATUS.) Edit Zone Name: Highlight Edit Zone name, press Enter and you will be able to rename the sensor. Record Zone Name: Highlight it press Enter, select Record, you are able to record 5 seconds of your own voice accordingly. If recording a sensor name in your own voice to identify a sensor, when you receive an alarming call on your cell phone or any other phones, you will hear the sensor name. Emergency Zone Highlight it press Enter, Default is NO, (If you set YES, the zone will be on 24hours, regardless of your
8 system s Arm or Disarm status. This is recommended to be used for smoke detector, panic button, water leak sensor and temperature sensors only. DONOT set any door sensor or motion sensor as Emergency zone). Home Zone Highlight it press Enter, Default is YES, ( if you select NO, the zone will disable during home alarm status, recommended for motion sensor NO, and all Window/door sensor YES) Chime Zone Highlight it press Enter, Default is NO,( This function not work with motion sensor) Delayed Zone Highlight it press Enter, Default is NO, (if set YES, allows you to come back home and open the door without triggering the system. System default delay alarm time is 45 seconds. You can change this time by going to "System Settings" and set the Alarm Delay time). Siren Enable Highlight it press Enter, Default is YES, (if set NO, siren will disable when this zone triggered, no siren alarm will sound.) Note: All zones are instant zones by Default.( Instant refers to the system being immediately armed if any zone is triggered when the system is in armed status.) Delete select it then press Enter, you can find the target sensor and delete it, Test the Motion Sensor The Motion Sensor will initialize itself during the first 1-3 minutes after the front cover is re-attached(do NOT KEEP Cover open). Do not test it during initialization. You can walk 3-5 steps in front of motion sensors after initialization, the LED will remain on for 3 seconds when motion is detected until the Motion Sensor short blinks once again before resuming motion detection for next detector. 1. Move away from the area that is in direct line of sight of the Motion Sensor (move to an adjacent room). Waiting 2-3 minutes until the LED stops blinking. 2. Move back into the line of sight of the Motion Sensor, walk around 3-5 steps. (this will trigger the main console). If the Motion Sensor test is successful the LCD screen will display " xxx Sensor Alarm". If these words do not appear, either (A) the 20-second waiting period since the last trigger has not expired, or (B) the Motion Sensor is not in communication with the PiSECTOR system main console. If you want to re-start the initialization again, open the Front Cover and remove battery waiting for 5 seconds then re-install it again, as shown in Figure 1 and then re-attach the Front Cover. Note1: For saving battery power, motion sensor may be insensitive if you active it more than three times in a few minutes. Please leave the detectable area for a few minutes and come back, it will detect you again. Note2: Motion sensor may be insensitive or give a lot false alarms if the temperature is more than 98F (37C). Mount Motion Sensor D. Place the motion sensors in the following location recommendations (check marked locations) shown in Figure C. Avoid the example location marked with the "X" which are household areas that typically cause false alarms, such as heat, air conditioning, fans, or direct sunlight. The recommended mounting height is feet for both coverage and pet immunity purposes. E. Apply the 3M adhesive tape in the locations shown in Figure D for corner mounting or wall mounting (apply for super glue on the surface of window or wall before stick 3M adhesive tape to void any falling). If you prefer to use screws to mount the motion sensor, follow the screw position shown in Figure E (optional)
9 Detection Patterns Motion sensor Specifications Replacement Battery: CR123A Mounting Height: Feet Range: Approximately 40 feet with 90 degree field of view in Vertical and 110 degree field of view in Horizon
10 Wireless Sirens Plug the siren into wall outlet, then press PROGRAM key on console. Enter the default password Use scroll key to select Wireless Sirens, press ENTER, you will see below list. Add If you received a pre-programed system kit, please ignore this step and do not program it again Add an Indoor Wireless Sirens, highlight Add press Enter, you will see a default siren name such as Siren 1, then press Enter You will see "Put siren in Setting Mode". Go to the wireless siren and press the code button one time on the wireless siren, you will see all 4 lights are on. This means the siren is in setting status waiting for the console to send a signal. Then go back to the console, press Enter and you will hear two beeps from the console and will see Add successful. Then you need press Set button 5 times until all light off to exist the set mode on siren. DO NOT test it when all 4 LED lights are on) Be aware If you press and hold code button more than 3 seconds, the siren will be deleted from console panel. Add an outdoor wireless sensor, highlight Add press Enter, you will see a default siren name such as Siren1 / Siren2 / Siren3, then press Enter You will see "Put siren in Setting Mode". Plug siren into the power adapter ( 9V 500mah ), and you will hear ONE beep. Unplug and plug the siren a second time within seconds after the first time, you will hear ONE beep again. Unplug and plug the siren the third time within seconds after the second time, you will hear a FEW short beeps from the siren. The FEW short beeps mean the siren is ready and in setting mode for program. Go back to the main console and press Enter immediately (no more than 5 seconds after the few short beeps), you will hear 3 beeps, 2 short beeps, and 3 beeps consecutively for conformation. That means your siren has been added to your main console. You may press back key until the console displays System Disarmed and the date /time page. Unplug siren from the power adapter and wait for 10 seconds to exit the setting mode. Test: Connect siren to the power adapter. Press Emergency key on the main console. You should hear the alarm sounding.(if you plug the siren to the adapter, and unplug, plug consecutively and rapidly for 5 times, the siren will be deleted from the main console. You may need to follow the steps above to re-program) EditSelect Edit and press Enter, you will see all 3 sirens name, select a siren s name and press Enter. You will then be able to change the siren s name. Delete If you find system shows Space full while you add extra siren or reprogram siren, select "Delete". Delete all "Siren 1 "Siren 2 "Siren 3 names, then you are able to re-program your siren by upon instructions (you can t delete the siren, this only deletes the sirens name. if you want to delete siren from your system, you need delete it on Siren, detail see how to delete your siren on siren manual page or FAQ.) Siren Enable Select "Siren Enable". If you set No, the sirens will not give any alert for the entire system. If you only want to quiet an individual zone's siren, you have to go to Sensors menu and Edit it. For details, read Edit under of Sensors. DurationYou can set wireless sirens to sound on a continuous alert. You can set it from 1 second to a maximum of 180 seconds. Arm/DisarmTone Select Arm/Disarm Tone and press Enter. If you set Yes, when you use the remote control to arm and disarm system, you will hear a loud beep warning from the siren. You can set No to turn off this warning tone if you don t like it. Default is No. Encrypt select Encrypt then press Enter, you will see default 1234 and blink, you can direct input another 4 digits to encrypt your siren. BEWARE If you change encryption code to a new code, you need to re-program all of your wireless sirens to the console again, you may change it before you program your sirens. Once you change it, DO NOT change it when you are going to add a second or third siren, otherwise you will lose the first siren s program. Video: q3ug&feature=youtu.be
11 Add Contact Phone Numbers Press PROGRAM key on console. Enter the default password Use scroll key to select Phone Numbers, press Enter, you will see below list Add Select Add press Enter. You will see Input phone number, direct input your area code and phone number, press save. You can add maximum of 6 numbers for emergency contact if the system is triggered. It is recommended to add your cell phone and your family or friends numbers. DO NOT add 911 or the local police number directly unless you get a permit. Edit select Edit press Enter, you will see Phone#1, Phone#2 select the target number which you want to edit, then press Enter, you will see Auto login, press Enter, If you set Auto login as Yes, then you can remotely call the system telephone number from anywhere in the world, you do not need to enter the password again to save you time when entering system remotely. It is recommended to set only your own number as auto login, all other numbers, keeps default as No. Delete Select Delete then press Enter, you will see all numbers which you saved, choose the target number which you want to delete then press Enter and delete it. SMS Numbers This system can store 3 text message receiving cell phone numbers. When alarming, it will send text to all these numbers e.g. power outage or any sensor triggered, you will get notification by text message. Press PROGRAM key on console. Enter the default password Use scroll key to select SMS Numbers, press Enter, you will see below list Add select Add press Enter. You will see Input phone number, direct input your area code and cell phone number. press save. You can add maximum of 3 numbers for receive text message EditSelect Edit press Enter,you will see Phone#1, Phone#2 select the target number which you want to edit, then press Enter, you will see Auto password. If you set Auto password as Yes, then you can remotely text the system telephone number from anywhere in the world, you do not need to enter the password again to save you time when arm/disarm system remotely. It is recommended to set only your own number as auto login, all other numbers, keep default as No. Delete Select Delete then press Enter, you will see all numbers which you saved, choose the target number which you want to delete then press Enter and delete it. Arm/Disarm Notification Select Arm/Disarm Notification then press Enter, if you check Yes, you will get a text message notification during system ARM or DISARM time, default is NO. Outgoing Message Press PROGRAM key on console and enter the default password Use scroll key to select Outgoing Messages, press Enter, you will see below list Edit Text Message press Enter you can directly input a text message for outgoing. Record Voice Message Select it and press Enter, select Record, and press Enter. You will see Recording and a counter from 10 to 00. When you see 10, you need to immediately start recording your voice and stop when you see 00. It is recommended that you record your home address for the outgoing message. Play You can select Play to play your voice. If you do not like it, you can Delete it and Record it again until you are satisfied. Note: The closer you are to the console during recording, the better the quality of the recording. Your mouth should be no more than 2 inches away from the console.
12 Connect Monitoring Center Press PROGRAM key on console. Enter the default password Use scroll key to select Monitoring Center. You can call your Monitoring Company to set up all requests. Please make sure your monitoring company supports ADMECO protocol if you want a third party Monitoring Company to monitor your system (it will cost you a monthly monitoring charges depending on which company you choose.) Monitoring Center Number Selector and press Enter then selects Add to add your monitoring center telephone number ADMECO Contact Id Selector and press Enter then selects Add to add your monitoring company account number. Select Delete to delete your account number, select ADEMECO Contact ID then press Enter to select the protocol ID according your monitoring center protocol ID request. Upload Alarm Data Selector and press Enter if set YES, all your data will be upload to monitoring center station, default is NO. Upload Arm/Disarm Data Selector and press Enter if you set YES, every time you do arm or disarm your system information will be upload to monitoring center station, default is NO. Daily Schedule Press PROGRAM key on console. Enter the default password Use scroll key to select Daily Schedule. Enable If you want to enable this function, first select Disable then press Enter, set NO, then back and select Enable, you can set the Arm time for your departure, and Disarm Time for when you arrive Home, then the system will Arm/Disarm automatically on schedule, so that you will never forget to arm or disarm system. Disable If you want to disable this function, select Disable then press Enter and check Yes. Default is set to disable as YES. System Settings Press PROGRAM key on console. Enter the default password Use scroll key to select System Settings, you will see below list. Password Select Password then press Enter you will see Old Password then press Enter and input 6 digits(not letter or icons) new password press Enter and input same password to confirm your new password, then press Save Arm Delay Time Select it and press Enter, you will see 60, directly input 2 digits for your delay time, you can change the Delay time to allow you to have enough time to leave the house. Defaults set at 60 seconds. The Delay Time for entire system. Maximum is 60 seconds. Alarm Delay Time Select it and press Enter, you will see 60, directly input 2 digits for your delay time, you can change the Delay time that allows you to open the door to disarm system when you return home. Default is set to 40 seconds.( This Alarm Delay time only works when you set individual sensors as Delay Zone. Otherwise it does not work. E.g. Disarm system press PROGRAM key then input password, highlight Sensor press Enter, highlight Edit press Enter, than highlight Manual Search press Enter and choose the sensor name then press enter, use scroll key find Delay Zone then press Enter and check Yes, save it. ), Maximum is 60 seconds. Landline Cut Warning Select it and press Enter, If you set Yes, during System Arm or Home Status, if an intruder cuts the landline or unplugs the landline jack, the system will immediately go off and sirens will start alarming. Default is set as No Ring Time Before Answer Select it and press Enter, you will see 1 flash, directly input a digit for your ring circle (maximum is 9), it allows you to change the ring times for answering your regular home phone, e.g. if you set it as 5 rings, during 5 rings you can answer your regular home phone, after 5 rings if no one answers the regular home phone, the alarm system will answer it. You will hear a prompt "Enter your Password" then you can enter your password to control the System. Press 1 to Arm System, Press 2 to Disarm System, Press 3 to listen in. Press 4 to intercom, press # to end.
13 Door/Window Open Reminder Select it and press Enter, If you set it Yes, you are not able to arm your system normally when doors or windows are open. It will remind you which zone door or window is open. You must close it, unless you arm the system by pressing button and holding for 3 seconds to force system to be armed. The default is set to NO.(This function will not work with updating system GSM06) Note: this function only work when you use remote keychain arm your system, you still can press Arm key input password on the console without this reminder warning. Date/Time Allows you to manually set your local date and time Priority Dial Telephone When you connect your console with dual network Landline and GSM both, then you may need to highlight Priority Dial Telephone press Enter and highlight Yes then Save it, this function allows you to set your system and use your landline priority to call out and save your SIM card credit, if someone cuts your landline the system will automatically call out from your SIM card. If you only use SIM card, please set it as NO. Language English Factory Reset<Restore Defaults> Allows you to set all functions as default without deleting your sensors and sirens so you do not need re-program again. If you choose<format System>, it will go back to factory default and format all your settings including your sensors and sirens. Then you will need to re-program all sensors, sirens and remotes to the console again. Beware of this function. About System Version press Enter you will find your software version Production Date: press Enter you will see the producing time of your system Manufacture By Pisector Inc. IMEI: press Enter you can find IMEI number for your system, maybe request to active your SIM card Remotely Control Your Home Security Alarm System Dial the number of the main unit console panel by your cell phone, and after 1 ring, you will hear a voice prompt Please enter password. If the password is correct, you will then hear a voice prompt Please enter instruction" then you can press 1 to arm, Press 2 to disarm, Press 3 to monitor, or Press 4 to intercom. If the password is incorrect, you will hear a prompt voice Wrong password, please re-enter. The system default operate password is Make sure to enter the password firmly by pressing and holding one digit at a time so you can hear a beep for each key press. You may need to hold keys for half a second at a time. Press : arm, if finished successfully, you will hear a voice prompt System armed. Press : disarm, if finished successfully, you will hear a voice prompt System disarmed. Press : monitoring for 30 seconds, to continue monitoring, press  again for another 30 seconds. You can cancel monitoring at anytime by pressing  to arm and  to disarm. Press : two-way intercom for 30 seconds. You cannot operate the main unit console panel during this time. You can cancel intercom at anytime by pressing  to arm and  to disarm. Or just simple text message from you cell phone to Arm/Disarm/Home Arm/History checking it Password follow by 1 for Arm. i.g Password follow by 2 for Disarm. i.g , Password follow by 3 for Home Arm, I.g Password follow by 4 for History checking. i.g Answer Alarm Call: to prevent alarm call answered by voice mail, you need manually answer the incoming alarm pre-saved cell phone then press # # twice to stop call the second number. on your
14 Wireless Panic Button (Option) Program Panic Button If you received a pre-programed system kit, please ignore this step and do not program it again. Panic Button you need should be programmed to your console. Press PROGRAM button on console, enter the default password Use Scroll key to choose Sensor then press Enter on Console. Then choose Add, press Enter again, then you will see Trigger Sensor, trigger your Panic Button by pressing the Red circle button. Then the console will request you to add a Zone Name for this sensor. Input a name for this sensor, then press SAVE. You will see Record Sensor Name, press Enter, record a voice for this panic button. Set the Panic button as Emergency zone, use it in 24/7 regardless of console being Armed or Disarmed (Press PROGRAM button on console, enter the default password , use Scroll key to choose Sensor then press Enter on Console. Choose Edit press Enter, then choose Manual Search press Enter, use Scroll key to find Panic button name and highlight it then press Enter, use Scroll key to choose Emergency zone then press Enter, highlight Yes then press Save, use function key Back to exist the program) In the SAME way you can add a Smoke Detector, Water Leak Sensor, Carbon Monoxide, and Temperature Sensors. You also can add a Glass Break Sensor to your system. Wireless Signal Transmitter (option) Wireless Signal Transmitter expands your wireless range up to 500 feet and makes the communication between all sensors and the main console better. Please install the antenna and plug a 12V 1A power adapter to the Power plug. Place the Wireless Signal Transmitter away from the main console for about 10 feet. Keep code 4 and 5 at ON position, all other codes at OFF position. The Transmitter will then start to auto transfer all the signals between the sensors and the main console. (Note: if you notice any issue such as an open icon displaying on the screen when the door or window is open because the main console has detected that the door or window is open, and the same icon is still showing after physically closing the door or window, a communication problem must have caused this issue. For a solution, you may need purchase this repeater to add to your system.)
15 Extra Wireless Keypad Instruction ( option) Model: WKP-03 This keypad does not work alone. You need to program it with PiSector Alarm Systems. It supports System model GS07, GS08, PS03 series systems. Anti-Remove Spring Package includes PiSector Keypad x 1 Power adapter 12V 1A, input V output 9-12V, Current 1A RFID Door Access Keychain Tag X 2 Add the keypad to console Step 1 Connect power to the keypad, and you will see Arm indicator light flash once every second. This is Stand by(disarm) status, meaning system is at power on. To keep internal back up battery in charge, please turn on the battery switch to ON position. Put the keypad on a hard surfaced table, and make sure to not trigger the keypad by releasing the anti-move spring, or by pressing the anti-move spring with hand. Make sure the keypad does not get triggered during programming. Step 2 At your main console, press Program followed by password. Then choose Remote Controllers ---press Enter --- select Add --- press Enter again. When you see "Trigger Controller, Code: " display, go to your extra keypad, press default password followed by Arm key (the lock icon), and you will see 9 digits display on the console. This is unique address for the extra keypad on the console. It will be auto saved after 3 seconds, and you will see "Add Owner Name". You can give a name to this keypad on the console, and then follow the steps to record a voice for the keypad name as your choice (optional). After that press Enter to continue until you see Add successful. Step 3 Press Chime key to exit setting status. Add RFID Key chains to Keypad During system disarm status, you can press default password followed by Enter key. You will see Set indicator light on and Enter key flashing. Then press followed by an Enter key --- Send indicator light on --- move your target key chain (the one that you want to add) close to the keypad read area, and you will hear a few short beeps, meaning add successful. You may add maximum 8 pieces RFID keys. At the end press Chime key to exit setting status. Delete RFID key chains from your PiSector Keypad During system disarm status, you can press default password followed by Enter key. You will see Set indicator light on and Enter key flashing. Then press follow by an Enter key. It will auto delete all key chains. You CANNOT delete one key chain each time. If you lost any key chain please choose to delete all key chains, then add other key chains again. At end, press Chime key to exit setting status. Operating instruction Password followed by Arm key to arm system--- Arm indicator light on in solid Password followed by Disarm key to disarm System. Open light on for 3 seconds (depending on how long you set for door open time --- default 3 seconds) --- Arm indicator light flashes once every second Password followed by Home key to arm system when you are at home--- Arm indicator light flashes once every 3 seconds Password followed by SOS for emergency
16 Password followed by Chime key to change system to Chime status Use key chain to disarm system directly without entering any password Other features Set Door Open Time During system disarm status, you can press default password followed by Enter key. You will see Set indicator light on and Enter key flashing and press T T ( T T for time, from 01 to 99 seconds) and Enter. This time is for how long you need an access to door without triggering the alarm. For example, when you use a key chain or password to open the door, how long you would want the door to be closed and system still be in arm status. Wireless Encryption If you had a neighbor having the same system or other devices that interfere your system and always results in false alarm, then during system disarm status, press default password followed by Enter key. When you see Set indicator light on and Enter key flashing, press dddd (any 4 digits pass code --- you do not need to remember this pass code it is only for encrypting the system with other device) Change Password After setting up your keypad, you may change the default password to your own password for safety. During system disarm status, you can press default password followed by Enter key. You will see Set indicator light on and Enter key flashing. Then press new password + Enter, repeat the new password follow by Enter one more time (you may set new password up to 6 digits). Then press Chime key to exit setting status. (Please keep your new password to a safe place and do not forget it) Reset Password If you forget your password, remove the keypad from the wall. At backside of the keypad, you will see Reset button, press the reset button and hold for 3 seconds, it will reset the keypad password to default password Wired Port Connection for Magnetic force lock or Electronics lock(option) Magnetic force lock and Electronic lock. Please make sure which type of lock you have, and select the correct connection Fig 1 for Normal Close Fig 2 for Normal Open
PiSector Land Line Auto Dial Professional Wireless Alarm System User Manual ( PS03 ) Read manual fully before use. PiSector Inc., USA, www.pisector.com Welcome to PiSECTOR Thank you for choosing PiSECTOR.
Wireless Home Security System Product Manual (Model #80355) Installation Instructions During set-up, if no key is pressed for 15 seconds it will come out of the setup mode and you will have to start over.
User Manual GSM Alarm System All rights reserved by Delta Security Co., Ltd Dear Clients, Thank you for using our GSM Alarm System. We are committed to giving you the best home security available today
Home Security Alarm System User Manual (ALM-S02) Read manual carefully before use. PiSector Inc., USA www.pisector.com Thank you for purchasing this home security alarm system. For your safety and better
CN2HK LIMITED Wireless AUTODIAL GSM SMS Home Alarm Security System 900/ 1800/ 1900Mhz(CK-GSM-9003) User Manual Please read this manual before operating this product. After you finish reading this manual,
WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000 Instructions for use Important! Please read these instructions carefully. IMPORTANT 1 IDENTIFICATION PLEASE CONTACT BEFORE RETURNING THIS PRODUCT TO THE RETAILER
tattletale User Guide Consumer unit version 2.48 1 P a g e Contents Basic 1... 4 Base Unit Features... 4 Initial Setup... 4 Arming... 5 Disarming... 5 Quiet Button... 5 Settings... 5 Settings 2... 6 Quick
MELALEUCA SECURITY QUICK START GUIDE 877.760.3444 www.melaleucasecurity.com LICENSES: AL 09-1312, DE 09-172, FL MSI s license number is EG13000363. Alarm companies are regulated by the Department of Business
MOBILE CALL GSM Alarm System User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. Contents Function Introduction Alarm Host Diagram
TX GSM SMS Auto-dial Alarm System Installation and User Manual Product Features: 1. 16 wireless zones, 3 wired zones alarm system, suitable for small to medium size offices and homes. 2. The system uses
MOBILE CALL GSM alarm system User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. - 1 - Catalogue: Function Introduction 2 SMS Number
Six-defense zone Display Alarm System User Manual Feature 1. Anti-interfere function. When someone interferes it with same frequency, the control unit will activate siren to alarm. 2. Support anti-decode
GSM ALARM SYSTEM USER MANUAL 1. Instruction The alarm system is based on GSM network. With a GSM SIM card, it can be used wherever you want and no need to connect any wire, which is convenient and easy
A. Manipulation Specification Quick Installation Guide 1. Arming Arming means all-around guarded when there is no person at home. All detectors are working. Once something triggers any of the detectors,
Using your LED Plus keypad System 238 System 2316 System 238i System 2316i Part Number 5-051-372-00 Rev B Thank you for purchasing this C&K alarm system Your system is one of the most powerful and advanced
STATUS POWER MONITOR ALARM SOS DISARM I. Features II. Preparation before use III. Host 1.LED status explanation 2. Host panel IV. System Settings 1. Coding of wireless sensors 2. Exit coding 3. Settings
Innovative GSM & WIFI dual network operating platform. On WIFI network, the alarm system will work without any fee. If no WIFI, it will work on GSM automatically. With state-of-the-art WIFI network technology,
GE Concord 4 Quick User Guide GE Concord 4 Quick User Guide Page 1 Before Calling Is the keypad beeping? Press *. This will silence the beeping and let you know where the trouble is. Is there a flashing
PiSector All in ONE Wireless GSM Alarm System User Manual (GSM-06) Read manual fully before use. PiSector Inc., USA, www.pisector.com 1. INTRODUCTION... 5 2. SYSTEM INITIALIZATION... 9 3. SYSTEM SETTING
LW-2000-3A Wireless Auto Dial Alarm System Sentry Plus User Manual By Global Gadgets Main Features Simple to use keypad for operation and control. The system can store up to 9 telephone numbers: positions
Additional Instruction Note: a. Please connect the camera with 2.4G WIFI router or Ethernet cable, can t support 5G router. b. For first time wifi connection, please put your mobile close to camera within
INHEP DIGITAL IDS S E C U R I T Y Users Guide to Keypad Functions MANUAL NO. 700-171-01B ISSUED AUG 2002 VERSION 1.18 Summary of Operation A rm/ disarm [#] + [USER CODE] Quick Quick Quick Away Arm Stay
Safe Health Guarder User Manual Contents Tips: Please read through this user manual before installation so as to operate properly. Please keep well of the user manual for further reference. For properly
User Guide Model: MAS-WA-SYS CONTENTS Section : Getting started... 4. General system overview. Introduction to the system.3 Items included with the system.4 Introduction to the Wireless Alarm Panel.5 Introduction
Zones 64 total Ademco Vista-20P/First Alert FA-168C Basic Commands Wireless Yes, Zones 09 to 48 + 16 Keyfob Zones (Zones 49 to 64) Batteries Downloadable Partitions 2 12 volt Rechargable inside main Panel,
Auto-dial Alarm System Intelligent GSM Auto-Dial Alarm System Profile For a better understanding of this product, please read this user manual thoroughly before using it. 2013.2.V1.0 Auto-dial Alarm System
DC-8706K Auto Dial Alarm System User Guide Basic Contents: 1x the host unit; 1x wireless door (window) magnet; 1x wireless infrared detector; 2x remote control; 1x siren; 1x phone core; 1x AC to DC power
GE Simon XT Quick User Guide GE Simon XT Quick User Guide Page 1 Before Calling Is the keypad beeping? Press STATUS. This will silence the beeping and let you know where the trouble is. Is there a flashing
Wireless Home Security Alarm System AM 500 12 MONTH GUARANTEE Installation & Operating Instructions INTRODUCTION The AM500 is a simple self-contained alarm system. It protects the home by sounding a siren
Troubleshooting: Auto dialer will not arm/disarm Auto dialer will not dial out Unit doesn t respond to a call-back Difficulty in activating room monitor by telephone remote control Make sure that you have
Business/Home GSM Alarm System Installation and User Manual Brief Introduction: GSM 900/1800/1900 bands, can be used in most parts of the world Full duplex communication with the host Monitor the scene
Intruder Alarm System GSM & PSTN Wireless and Wired Touch Model 2013-01 V1.0.0 Statment This equipment must be installed and used in strict accordance with the instructions given in this user documentation.
Users Guide to Keypad Functions MANUAL NO. 700-175-01J ISSUED JAN 2002 VERSION 1.41 Summary of Operation A rm/ disarm [#] + [USER CODE] Quick Quick Quick Panic Fire Medical Away Arm Stay Arm Stay Arm &
www.skylinkhome.com Total Protection Alarm System MODEL : SC-100 English P/N. 101A063-005 OCT, 2004 CUSTOMER SERVICE 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Tel : (800) 304-1187 Fax : (800)
CAD-05 Kit GSM Auto Dialer Owner s Manual CAD-05 Kit Manual.indd 1 Warnings: This device complies with Part 15 of the FCC rules, Operation of this device is subject to the following conditions: 1. This
1 2 Contents 1. Introduction to the IDS X-Series Panels... 7 2. Before Operating Your Alarm System... 7 3. Understanding the Keypad LEDs... 8 3.1 Viewing Data on an LED Keypad... 12 3.1.1 LED Status Indicators...
INTRODUCTION Our jnique passive in`raroc ^ys,e^ii conccotrates on the protected area you select. Whenever the unit is set at ARMED, the motion detector will concentrate on the protected area. Once there
FA701 Series TouchCenter Keypads User s Guide K6249-2V2 5/09 Rev. A Table of Contents ABOUT THE TOUCHCENTER... 5 Introduction... 5 2 The TouchCenter Interface... 5 Navigating through the TouchCenter...
LCD -based Intelligent Burglar Alarm System User Guide Ver 2.0 Table of Content 1. Introduction... 2 1.1 General Description... 3 1.2 System Features... 3 2. Anatomy of the LCD-based Intelligence Burglar
New GSM Alarm System User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. Chapter 1. Features Chapter 2. Alarm Host Introduction Chapter
GSM AD05 Slave GSM Auto Dialer- Instruction Manual Please read these instructions before you start the installation Features LCD display Programmable 9 x 32 digit phone numbers for each trigger. 10 second
Quick Setup Guide DIRECTV Cellular System 1 Welcome You ve made a great decision to protect your family and home with LifeShield, so use it to the fullest! Arming your system daily gives you peace of mind
Alarm Security Kit - NVR EN The alarm configuration menu (see above right screenshot) allows you to configure and change settings for the PIR movement sensors, window/door sensors, remote controls (key
WIRELESS ALARM KIT COMPLETE ALARM SYSTEM FOR HOME OR BUSINESS Model Number: IT214054 INSTRUCTION MANUAL Warranty Details/Support This product is warranted against defects for a period of One year if the
www.skylinkhome.com Total Protection Alarm System MODEL: SC-1000W If you would like to order Skylink s products or have difficulty getting them to work or download information and user manual, please :
4902000 HWS100 Wireless Home Security System Owner s Manual WARNING: Security system devices cannot compensate for loss of life or property. Company is not responsible for any loss or intrusion. CONTENTS
GC2 Panel User Guide ENGLISH (International) WIRELESS SECURITY SYSTEM WARNING: OWNER S I NSTRUCTION NOTICE Not to be removed by anyone except occupant THIS PAGE INTENTIONALLY LEFT BLANK CONTENTS System
www.fortresssecuritystore.com 2014 Fortress Security Store S02 v1.2.1 Page 1 2014 Fortress Security Store S02 v1.2.1 Page 1 Fortress Security Store S02 Alarm System User Manual 2014 Fortress Security Store
Bright House Networks Home Security and Control Peace of mind included. QUICK START GUIDE Your System Components BASIC HOME SECURITY EQUIPMENT INCLUDED IN YOUR WIRELESS PACKAGE Touchscreen Wireless Motion
FIRST ALERT INSTRUCTION MANUAL FOR FA 270 KEYPADS SECURITY SYSTEM Page 0 Table of Contents Introduction 1 System Basics.. 1 Burglary Protection.. 1 Fire Protection.. 1 Security Codes. 1 Zones and Partitions
Hills wireless security alarm DIY range EASY TO INSTALL DIY system PEACE OF MIND Receive SMS/calls when alarm is armed INTERACTIVE Arm and disarm by SMS or via smartphone app Control your alarm via smart
GSM INTRUSION ALARM SYSTEM INSTRUCTION MANUAL GSM - PSTN - SMS - TOUCH GSM Wireless Security Alarm System SECURE YOUR HOME AND BUSINESS Printed in Shenzhen RE: G60-GSM-August-2013 Key Features Smart touch
Welcome to a whole new level of interactive home security User Manual TouchScreen Key Fob Keychain Remote Web Access Mobile Access ReadyHome User Manual Introducing a whole new level of security for the
INSTRUCTION MANUAL All-In-One GSM Home Alarm System SB-SP7200-GSM Revised: August 28, 2014 PRODUCT REFERENCE MOUNTING ACCESSORIES PIR / MOTION DETECTION UNIT MAIN UNIT POWER ADAPTER MOUNTING ACCESSORIES
GSM home alarm system s manual I. Main features: 1, Eight wireless LED zone, and four wired zone 2, Two-way to communication 3, The system supports the GSM cell phones, no need the fixed telephone line.
) *(6HFXULW\ 466-1936 Rev E October 2004 ZZZ*(6HFXULW\FRP Part No: 60-883-95R CareGard User Guide FCC Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by GE Security
EM8610 e-alarm GSM Alarm System Starter Kit 2 ENGLISH EM8610 - GSM Alarm system Starter Kit Table of contents 1.0 Introduction... 4 1.1 Packing contents... 4 2.0 Explanation of the control panel... 5 2.1
USER MANUAL Wireless alarm system with voice dialer INTRODUCTION When an intruder enters the protected area, it will trigger a strident siren and the red LED will flash. The dialer will automatically call
OM2260VW2 USER MANUAL VERIZON WIRELESS HOME PHONE CONNECT Welcome to Verizon Wireless Thank you for choosing Verizon Wireless Home Phone Connect. You re now connected to the power of America s most reliable
Wireless Security System 2GIG-CNTRL2 (2GIG-CP2) User s Guide WARNING: Owner s Instruction Notice Not to be removed by anyone except occupant The Go!Control Security System Congratulations on your ownership
45131 Wireless Alarm System Window/Door Sensor User s Manual Choice ALERT Control all Sensors & accessories from one location Table of Contents Important Safeguards 4 Introduction 5 Installation 6 Assigning
LYNX Touch Security System User Guide 800-10615V1 12/12 Rev. A LYNX Touch L5100 Series Your Honeywell security system is designed for use with devices manufactured or approved by Honeywell for use with
LYNX Touch Security System User Guide 1:35 2 PM October 26, 2011 72 Mostly Sunny 68 F F Feels Like 71 Security Messages Automation 5-Day Forecast News Traffic 800-10615 1/12 Rev. A LYNX Touch L5100 Series
Owner s Manual Two options for getting started: 1 The Keychain Remote contains the SimpliSafe Easy Setup Wizard a software program that provides animated instructions and lets you customize your system
Firmware version: 1.10 Issue: 7 AUTODIALER GD30.2 Instruction Manual Firmware version: 2.0.1 Issue: 0.6 Version of the GPRS transmitters configurator: 18.104.22.168 Date of issue: 07.03.2012 TABLE OF CONTENTS
Business/Home GSM Alarm system Installation and Users guide Profile For a better understanding of this product, please read this user manual thoroughly before using it. I. General information: GSM 900/1800/1900
GSM Alarm System User Manual For a better understanding of this product, please read this user manual thoroughly before using it. Quick Guider After getting this alarm system, you need to do the following
User Manual Welcome to LifeShield Thank you for choosing LifeShield as your home security system. We take the safety of your home and family very seriously, and we are committed to giving you a fantastic
I N S T A L L A T I O N M A N U A L GSM Alarm Security System ST-SK1 Features Box content - GSM transmiter - Supports up to 10 remote controls, 99 wireless accessories and 50 RFID tags - Can store up to
Home & Office Security, Personal Alarms & Safety Products Safe is Smart Easy Installation Wireless Alarms No Monthly Fees Standalone Alarms Standalone Alarms from SABRE are a great solution to help protect
Business/Home GSM Alarm System(III) Installation and Users guide I. General information: GSM 900/1800/1900 bands, can be used all over the world. Full duplex communication with the base. Monitor environment
Bright House Networks Home Security and Control Product Description Table of Contents Introduction... 3 Understanding Basic Security Terms and Functionality... 4 Security Zones... 4 Arming Modes... 4 Arm
GSM&PSTN Dual-Network Burglar Alarm System (KR-5800G) User Guide Version 2.0 Version 2.0 Page 1 of 38 Table of Content 1. Introduction... 3 1.1 General Description...3 1.2 System Features...3 2. Anatomy
Business/Home GSM Alarm Systems Installation and Users guide Profile For a better understanding of this product, please read this user manual thoroughly before using it. - 1 - Ⅰ.General information: 1.
LYNX Touch L7000 Series Security System User Guide 800-16084 12/13 Rev. A LYNX Touch L7000 Series Your Honeywell security system is designed for use with devices manufactured or approved by Honeywell for