3.6/7.2/12kV. High-voltage Metal-enclosed Switchgear and Controlgear VCM-CLAD 07A1-E-0009
|
|
- Patrick Banks
- 7 years ago
- Views:
Transcription
1 3.6/7.2/12kV High-voltage Metal-enclosed Switchgear and Controlgear VCM-CLAD 07A1-E-000
2 Features 1. Applicability n VCM-CLAD has a high applicability as a switchgear for various industrial facilities and power plants with its wide range ratings (up to 12kV, up to A, up to 50kA). The suitable system can be made a plan by the wide selection. n VCM-V3, V6 A maximum of up to three units can be stacked so allowing a drastic reduction in the of units and panels required. Scope of basic type 2. Safety design n VCM-CLAD is designed for horizontal isolation, and the unit housing is of firm fabricated-steel construction. n The metal-clad design of VCM-CLAD ensures safety with perfect interlocks. The withdrawable circuit breaker has complete mechanical interlocks to prevent a mal-operation. n Busbar and circuit spout orifices are fitted with automatically operated safety shutters. The shutters are of resin, and close orifices by withdrawal of the breaker. 3. Safety interlocks The following mechanical interlocks are provided to achieve safety. (1) The circuit breaker cannot be drawn-out or inserted to/from the service position while it is closed. (2) The circuit breaker cannnot be closed while it is being drawnout or inserted. (3) When IEC28 standard (Metal clad type) is applied, aux. circuit plug interlock is provided as shown below. Aux. circuit plug can not be removed while the circuit breaker is in [SERVICE] position. Aux. circuit plug interlock for IEC28 (Metal Clad Type) 5. Variety of optional items n Earthing switch n Multiple function protector and controller n Surge absorber Earthing switch (option) Rated voltage [kv] 3.6/7.2 Rated [ka] Degree of protection Enclosure IP 2X 1) Partition IP 2X 2) Busbar system Single Bare 3) Note. 1) Enclosures are available for the degrees of protection of IP3X, if required. 2) Partitions are available for the degree of protection of IP3X, if required. 3) Busbars can be insulated, when required. Safety shutters Isolated position (test position when aux. circuit plug is inserted.) Moving rod Insertion inhibition stopper Aux. circuit plug of side Interlock rail Front cover of Knob Fixture Interlock pin Floor of cradle Aux.circuit plug of panel side N Rated voltage [kv] 12 [ka] Rated 4. Maintenance and inspection The long mechanical and electrical life of the vacuum circuit breaker has minimized maintenance and inspection work with its simple and unique design Multiple function protector and controller (option) : MULTI., Auto.V : HS Series (Motor-spring stored-energy) DK8745 DK10734 DK
3 Ratings Construction g 3.6/7.2kV Switchgear Type VCM-V3/VCM-V6 Rated voltage [kv] 3.6/7.2 Applicable standard JEM1425-CW IEC28 JEM1425-MW IEC28 JEM1425-MWG IEC28 Construction Partition Not provided Provided Provided 1. Example of switchgear and controlgear Metal-clad type (MW) Cubicle type (CW) shutter Not provided Provided (Resin) Provided (Resin) Busbar Bare Bare Insulated Rated frequency [Hz] 50/ ñ 1250ñ ñ 3150 (3000) 630ñ1250ññ3150 (3000) ñ Rated short-time [ka] Rated insulation level 16kV AC/1min, 45kV peak (class 3A) 10kV AC/1min, 40kV peak (IEC28) 22kV AC/1min, 60kV peak (class 6A) 20kV AC/1min, 60kV peak (IEC28) Shutter Busbar compartment Cable compartment Partition Protective plate Circuit breaker compartment Service position Test/lsolated position Busbar Protective plate Test/lsolated position Service position Control cable entry room Rated operating voltage [V] AC 100/200, DC 100/200 Cricuit breaker Type HB1206 HS2006 HS2506 HS3106 HS4006 HS5006 [ka] Control cable entry room Rated (630) (630)ñ (1250)ñ (1250) ñ ñ 3000 ñ *1 Earth bar Earth bar Closing system Motor-spring stored-energy Note *1 : Available only for HS4006 g 12kV Switchgear Type VCM-V10 Rated voltage [kv] 12 Applicable standard JEM1425-CW IEC28 JEM1425-MW IEC28 JEM1425-MWG IEC28 Construction Partition Not provided Provided Provided shutter Not provided Provided (Resin) Provided (Resin) 2. Busbars The busbars are of hard-drawn high-conductivity copper, and can be insulated with epoxy-coating except connections. The connections are covered with easily removable insulated cover. The insulations can withstand a rated voltage for 1 minute as well as a temperature rise caused by short-circuit s. 3. Voltage Transformers (VTs) The VTs are epoxy resin molded type. The VTs and its associated primary fuses are withdrawable type, and are installed in the independent compartment. The VTs have the "service" and "disconnected" positions with a indicator visible from the outside of the unit. Busbar Bare Bare Insulated Rated frequency [Hz] 50/60 Busbar compartment DK8746 Drawable truck DK ñ1250ññ3150 (3000) ñ Rated short-time [ka] Rated insulation level 28kV AC/1min, 75kV peak (class 10B) Same as IEC28 Rated operating voltage [V] AC 100/200, DC 100/200 Cricuit breaker Type HS1210 HS2010 HS2510 HS3110 HS4010 HS5010 [ka] Rated (630) ñ (1250)ñ (1250) ñ ñ 3000 ñ *2 Closing system Motor-spring stored-energy Note *2 : Available only for HS
4 Dimensions 3.6/7.2kV Typical Arrangement g Lead-in of main circuit Parts of lead-in Kind of cable Cable termination facilities Rear and bottom in cabinet by cable XLPE cable without armour Cable lugs, glands, terminating facilities, etc. will not be supplied by Fuji. g Lead-in auxiliary and control circuit Parts of lead-in Front and bottom in cabinet by cable Allowable cable size Maximum 5.5mm 2 Cable termination facilities Cable lugs, glands, etc. will not be supplied by Fuji. g VCM-V3 and VCM-V6 [ka] Drawing 12.5/20/ to 3150 (3000) W [mm] D [mm] H [mm] 2300 (Base channel + 50) Mass [kg] g 2 units type 1 g 3 units type 3 g of auxiliary and control circuit wiring Wiring method Duct and/or bundle wiring Kind of wires V PVC insulation As per JIS C 3307 wires Size of wires For general circuit Minimum 1.25mm 2 Secondary circuit of Minimum 1.25mm 2 instrument transformer Sheath color of Yellow (Green: Earthing circuit) wires g Color identification of phases and polarities Kind of Alternating (AC) Direct (DC) source Phases and 1st phase 2nd phase 3rd phase Zero or neutral Positive pole (P) Negative pole (N) polarities (R) (S) (T) (O or N) Color identification Red White Blue Black Red Blue g of finish color Parts to be colored Color (Munsell notation) External and internal surfaces of metal enclosure 5Y7/1 Frames of apparatus, i.e., meter and relays N1.5 appearing on the surface of the panel Switch handles, operating handles, etc. general use N1.5 for emergency stop 7.5R4.5/14 g of nameplates (labels) Materials Color of background Color of letter Calligraphis style For title and purpose Plastics White Black Round gothic type For operation of the control and selection switches Metal Silver aventurine Black Round gothic type [ka] 31.5/ to 3150 (3000) 3000 Drawing W [mm] D [mm] H [mm] 2300 (Base channel + 50) Mass [kg] g VCM-V10 [ka] 12.5/20/ to 3150 (3000) 3000 Drawing W [mm] D [mm] H [mm] 2 (Base channel + 50) Mass [kg] [ka] 31.5/ to 3150 (3000) 3000 Drawing W [mm] D [mm] H [mm] 2 (Base channel + 50) Mass [kg] Unit arrangement Section view JEM1425-CW IEC28-Cubicle Type Up to 25kA Unit arrangement Section view JEM1425-CW IEC28-Cubicle Type Up to 20kA Rated Current A 5 6
5 Substations Section View : JEM1425-MW, IEC 28-Metal Clad Type. g 12kV Up to 25kA 31.5/40kA g 3.6/7.2kV g 3.6/7.2kV G Up to 25kA 31.5/40kA Unit arrangement g 12kV G Unit arrangement
6 F-MPC60 (Fuji Multiple Protector and Controller; option) 1. Product 3. Protection function Name Function Function Setting ranges Over curves Protection Measurement (Monitor) Control Bus unit OV, UV, OVG 3V, Vo, Hz Feeder unit HOC, OC, DG(67), SP(46), RV(47) 3A, kw, kvar, kwh, cos, Ao C. B ON/OFF Receiving unit HOC, OC, OCG, OV, UV, SP(46), RV(47) 3A, 3V, Hz, cos, kw, kvar, kwh, Vo, Ao, kvarh C. B ON/OFF Other Monitor Functions : Fault /voltage. Running hours/times etc. Option : T-link communication system. Over instantaneous Over Ground direction (DG) (EVT or ZPC) Current : 2 to 16 Multiplied, Lock Time : 0 and 0.2~2s Characteristic curves : SI/EI/l 2 t Overload Current : 20~240%, Lock Time : 0.5 to 20 Multiplied Current : 0.1~1.0A(), Lock Voltage : 2.5~40% Maximum sensitivity angle : 30,45,60 (leading) Time : 0.1~3.0s l 2 t 2. Indication and operation function Monitor LEDs Over voltage Voltage : 110~140V, Lock, Time : 0~5s Under voltage Voltage : 50~0V, Lock, Time : 0~5s Ground fault (OVG) Voltage : 2.5~40%, Lock, Time : 0~30s Ground fault (OCG) Current : 0.1~1.0A (), Lock, Time : 0.1~3.0s Single phase (46) Unbalanced ratio 50~80%, Lock Operating time [s] 10 1 Sl L=10 L=10 Fault code table Remote-local Reverse voltage (47) Reversevoltage, Lock 0.1 El L=10 Indicator (7seg LEDs) C. B On-Off [%] Input (100%=Setting ) LEDs Sheet sw N Connection (Shows example of feeder unit) Front panel (Shows feeder unit) R S T CB T.Tm U V W M N PT From BUS UNIT Vo NO. Name Bus Unit / Feeder receiving unit T.Tm F-MPC60 1 Monitor LED POWER Indicates that power supply is ready INST OC (I 2 t, Sl, El) DG SP RV RUN ALARM Indicates that the unit is normal running Indicates that error occurs (by self-diagnosis) T.Tm 3A kw kvar kwh cos A0 FAULT PLURAL F. Indicates fault (ex. Over, Earthfault, Over/Undervoltage etc.) Indicates that plural fault occurs ON OFF Trip TCS OC DC ararm 2 Fault code table Shows fault code 3 Indicator (7seg LEDs) CODE Indicates Fault-code, Setting-code, Historical-code and Test-code TEST Remote-ON Remote-OFF CB Trip 1 Trip 2 Aux, input DATA Indicates measurement, Fault, Setting-data and historical-data P 4 LEDs Shows unit of measurement 5 Sheet switches ᐯ ᐱ Pushbutton for display (3 etc.) selection SET NET RESET Pushbutton for set. reset DC100V/110V N CCCB TC X2 X2 T 10
7 Application Guide of Surge Absorber The high surge voltage by the that injures the insulation of the machines and apparatus is generated under certain specific conditions. The necessity of surge protection depends on the dielectric strength of the device used as a load. The application guide given below is based on the results of switching surge tests. When the dielectric strength of the device is low, use of a surge absorber is recommended. g Surge absorber application guide Load Voltege 3.3kV 6.6kV 11kV Rotating machine Molded transformer *1 *2,*3 (BIL 45kV) *2,*3 (BIL 60kV) *3 or gapless arrester (BIL 55kV) Oil-immersed *2,*3 transformer *1 (BIL 45kV) Dry-type *3 transformer *1 (BIL 25kV) *2,*3 (BIL 60kV) *3 (BIL 35kV) *2,*3 (BIL 0kV) *3 or gapless arrester (BIL 55kV) Notes : Protection device required : Protection device not required *1 : The withstand voltages (impulse) of transformer must exceed the values listed above. *2 : When interrupting a magnetizing inrush, it is recommended that a protection device be used. A standard lightning arrester is sufficient. *3 : Semiconductor device must be provided with suitable protection devices when a semiconductor is installed on the load side of transformer, since a surge on the low voltage side will also cause a voltage appear on the load side, depending on the turns ratio. Ordering When placing your valued order, please specify the following 1) Single line diagram of electrical equipments (plants) for planning 2) Rated operational voltage, frequency, normal, shorttime withstand, (i.e., 6.6kV 50Hz, 1250A, 31.5kA at 1 sec.) and kind of loads, their ratings their circuit s (i.e. 5-motors 6.6kV, 500kW, 2-transformer 6.6kV/420V, 1500kVA) 3) Kind, size, core and quantity per phase of cable at each circuit 4) Rated control circuit (or supply) voltage and AC or DC 5) Normal or special service conditions and their detail 6) Requirement of transportation and installation 7) Protection and control system 8) Requirement from standard optional extras Printed on recycled paper Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome, Shinagawa-ku, Tokyo , Japan Phone : (03) Internet address : Information in this catalog is subject to change without notice (C2013/G18)KO-H/P3FOLS Printed in Japan
SF 6 Gas Insulated Switchgear Type SDF for 170 kv
Three Phase Encapsulated Type SF 6 Gas Insulated Switchgear Type SDF for 170 kv 06B1-E-0001 With Trustworthy Technology, Structure Fuji Electric as a manufacturer of comprehensive substation equipment
More information2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1. 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std.
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std. Relays) Part 1 General 1.1 CONDITIONS AND REQUIREMENTS: A. Refer to
More informationMEDIUM VOLTAGE SWITCHGEAR AND CONTROLGEAR MODEL MS-E. IEC 62271-200 7.2 /12 /15 kv 25, 31.5, 40 ka
SWITCHGEAR AND CONTROLGEAR MODEL MS-E IEC 6227- /2 /5 kv,, ka The MS-E conforms to IEC 6227- standard and is designed and manufactured utilising Mitsubishi Electric state-of-the-art technology, fully taking
More informationMEDIUM VOLTAGE CE-BF SWITCHBOARDS. UP TO 40.5 kv. CE - BF - C - en - REV.00 2012.4
CE - BF - C - en - REV.00 2012.4 APPLICATION CE-BF Switchbords up to 40.5 kv are designed for use in public and industrial distribution system up to 40,5KV for the operation and protection of lines, transformers,
More informationUniGear ZS1. Medium voltage, arc proof, air insulated switchgear for primary distribution
UniGear ZS1 Medium voltage, arc proof, air insulated switchgear for primary distribution UniGear ZS1: an innovative solution for all installation requirements ABB UniGear is medium voltage metal-clad,
More informationNATUS NES / NES-H Draw-out Type Medium Voltage Switchgear Systems. Safe energy distribution that meets the highest industrial requirements
NATUS NES / NES-H Draw-out Type Medium Voltage Switchgear Systems Safe energy distribution that meets the highest industrial requirements NATUS switchgear systems your advantages minimal use of insulant
More informationUnified requirements for systems with voltages above 1 kv up to 15 kv
(1991) (Rev.1 May 2001) (Rev.2 July 2003) (Rev.3 Feb 2015) Unified requirements for systems with voltages above 1 kv up to 15 kv 1. General 1.1 Field of application The following requirements apply to
More informationMETAL-CLAD AND METAL-ENCLOSED SWITCHGEAR 3.6KV~40.5KV. tgood.com. Energy. Fast.
METAL-CLAD AND METAL-ENCLOSED SWITCHGEAR 3.6KV~40.5KV tgood.com Energy. Fast. TGOOD produces over 5000 switchgear units annually for projects around the globe PRODUCT OVERVIEW Integral substation component
More informationThe Intelligent AX1 Switchgear for Medium Voltage
The Intelligent AX1 Switchgear for Medium Voltage Leif Lundin, Manager of Research and Development, Division Medium Voltage and Compact Substations, ABB Distribution, Sweden Abstract The newly launched
More information3.1.1 Full Type Tests & Routine Tests according to Clause 8 2 & 8 3. 4.0 Instructions For Installation, Operation & Maintenance
SPECIFICATION FOR LOW VOLTAGE SWITCHBOARD SEN I N D E X Description 10 STANDARD TECHNICAL REQUIREMENTS 11 Standards 12 General Operating Conditions 13 General Description Of Switchboard 131 Structure 132
More informationMasterclad Medium Voltage Passive Arc-Resistant Switchgear
Masterclad Medium Voltage Passive Arc-Resistant Switchgear Square D Masterclad medium voltage passive arc-resistant (AR) switchgear is designed with utilities and industrial customers in mind who demand
More informationVoltage Rated operating voltage [kv] 12 24 Rated power frequency withstand voltage [kv] 28 50 Rated lightning impulse withstand voltage [kv] 75 125
Standards and Regulations IEC 62271-200 ; VDE 0671-200 ; BS EN 62271-200 Technical Data MC3-12 MC3-24 Voltage Rated operating voltage [kv] 12 24 Rated power frequency withstand voltage [kv] 28 50 Rated
More informationMedium Voltage Products. ZN1 12 kv arc-proof air-insulated switchgear for primary distribution
Medium Voltage Products ZN1 12 kv arc-proof air-insulated switchgear for primary distribution ZN1 an innovative switchgear for power distribution requirements ABB ZN1 primary distribution switchgear is
More informationLow voltage Direct Current Network. Compact NSX DC PV. Circuit breakers and switch disconnectors for solar application.
Low voltage Direct Current Network Compact NSX DC PV Circuit breakers and switch disconnectors for solar application Catalogue 2012 Compact NSX DC PV A complete DC offer for solar application from 80
More informationSiemens AG Power Transmission and Distribution Medium Voltage Division Mozartstr. 31c 91052 Erlangen Germany. www.siemens.
Siemens AG Power Transmission and Distribution Medium Voltage Division Mozartstr. 31c 91052 Erlangen Germany www.siemens.com/energy For questions on power transmission and distribution, please contact
More informationSecondary Unit Substations
14 SWITCHGEAR Secondary Unit Substations Overview Siemens offers a wide variety of unit substation designs to meet customer requirements. A unit substation consists of one or more transformers mechanically
More informationOur brand POWER DYNAMIC PASSION COMMITMENT CREATIVITY. A strong brand for strong products: 8PU Premium. MV Energy
Our brand A strong brand for strong products: The ENERGOLINE brand represents our product portfolio of INDUSTRIAL SWITCHGEAR SYSTEMS. Our products are characterized by a high degree of safety, flexibility
More informationSENTRON Switching and Protection Devices Air Circuit Breakers
Siemens AG 9 SENTRON Switching and rotection Devices Air Circuit reakers 5 5/ Introduction 3WL Air Circuit reakers 3WL Air Circuit reakers/ Non-Automatic Air Circuit reakers up to 63 A (AC) 5/6 General
More informationSWITCHGEAR SOLUTIONS FOR MISSION CRITICAL APPLICATIONS. Presented by SAI Advanced Power Solutions
SWITCHGEAR SOLUTIONS FOR MISSION CRITICAL APPLICATIONS POWER DISTRIBUTION RACKS IN A MISSION CRITICAL SYSTEM MODULES IN A MISSION CRITICAL SYSTEM UPS Convertor Main Inverter Load Battery BPC UPS & BATTERY
More informationEngineering Specification
Engineering Specification Electrical 33KV AC INDOOR SWITCHGEAR NON-WITHDRAWABLE Owner: Approved by: Chief Engineer, Electrical Neal Hook Chief Engineer Electrical Authorised by: Version 2.1 Issued May
More informatione 2 ALPHA Medium Voltage Switchgear Data Sheet K-1.1.2 EN
e 2 ALPHA Medium Voltage Switchgear Data Sheet K-1.1.2 EN We create ideas with power! ELEKTROMETAL ENERGETYKA SA is a new Polish company providing solutions for electrical power engineering. Our services
More informationCurrent valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw
4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and
More informationTrade of Electrician. Three-phase Distribution Boards And Socket Circuits
Trade of Electrician Standards Based Apprenticeship Three-phase Distribution Boards And Socket Circuits Phase 2 Module No. 2.3 Unit No. 2.3.2 COURSE NOTES Created by Charlie Walsh - Athlone TC Revision
More informationSubmit shop drawings for equipment provided under this section Shop drawings shall indicate:
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Reference The work under this section is subject to requirements of the Contract Documents including the General Conditions, Supplementary Conditions,
More informationR.C.C.B. s two-pole LEXIC
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s two-pole LEXIC 089 06/09/10/11/12/15/16/17/18/ 27/28/29/30/35, CONTENTS PAGES 1. Electrical and mechanical characteristics...
More informationBulletin 150 SMC Flex Smart Motor Controller Specifications
Specifications Specifications Standard Features Optional Features Installation Setup Communications Power Wiring Control Wiring Keypad Software Starting and Stopping Modes Protection and Diagnostics Metering
More informationSpecification Guide. for RVAC. Direct Replacement. AC Medium Voltage. Circuit Breakers
Specification Guide for RVAC Direct Replacement AC Medium Voltage Circuit Breakers Table of Contents 1.0 General Work Scope...3 2.0 Standards...3 3.0 Supplier Qualifications...4 4.0 Circuit Breaker Element
More informationSwitchgear and Metal-Enclosed Bus
Section 18 Switchgear and Metal-Enclosed Bus 180. SWITCHGEAR ASSEMBLIES 180A. General Requirements for All Switchgear. This rule covers general requirements for all switchgear. Examples of switchgear found
More informationRISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:
Application : RISH Master 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network & replaces the multiple analog
More informationInstallation, Operation and Maintenance Instructions. Uniflex ABB PTMV
Installation, Operation and Maintenance Instructions Uniflex ABB PTMV SAFETY FIRST! For safe and correct usage note the following recommendations: Only install switchgear and switchboards in enclosed rooms
More informationMNS is Switchgear System Technical Overview
Switchgear System Technical Overview Innovative Design ABB s innovative MNS is concept combines the long term experience, energy efficiency, grid reliability and industrial productivity of the well-known
More informationPRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors
PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2
More informationComparative study for cables and busbars
Comparative study for cables and busbars Preliminary considerations To compare the prices of two categories of product as different as traditional cables and busbars, it is necessary to make some preliminary
More informationSecuring your electrical installations Prisma,
Securing your electrical installations Prisma, an optimised solution for type tested low voltage switchboards up to 3200 A Table of contents Developing installation safety 4 Prisma P * Electrical switchboards
More informationLIMITING SHORT-CIRCUIT CURRENTS IN MEDIUM-VOLTAGE APPLICATIONS
LIMITING SHORT-CIRCUIT CURRENTS IN MEDIUM-VOLTAGE APPLICATIONS Terence Hazel Senior Member IEEE Schneider Electric 38050 Grenoble France Abstract The power requirements for large industrial sites is increasing.
More informationPower Meter Series 700
PowerLogic power-monitoring units Power Meter Series 700 Technical data sheet 2007 Functions and characteristics E90463 The PowerLogic Power Meter Series 700 offers all the measurement capabilities required
More informationELECTRICAL INSULATION TESTING OF HV EQUIPMENT UP TO 33kV
1. SCOPE This document details PowerSystems requirements for electrical testing of HV Equipment up to and including 33kV. 2. ISSUE RECORD This is a Reference document. The current version of Controlled
More informationSIRCOVER. Manual changeover switches from 125 to 3200 A. Changeover switches. Function. Advantages. The solution for.
The solution for Changeover switches svr_099_b_1_cat > Manufacturing industry. > Power distribution. 3200 Strong points svr_059_a_1_cat > complete range. > Easy connections. > Stable positions. > mproved
More informationCAPACITOR BANK TESTING SWP
1. PURPOSE AND SCOPE The purpose of this Standard Work Practice (SWP) is to standardise and prescribe the method for testing Capacitor Banks including capacitors, tuning reactors and inrush limiting reactors.
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationMEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS
MEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS Meher Capacitors offers reliable and innovative products and solutions in the fields of Reactive Power Compensation, Power Quality and Energy
More informationType-Tested Power Distribution Board 8PT with Rear Busbars. sivacon
Type-Tested Power Distribution Board 8PT with Rear Busbars sivacon The Obvious Solution for Global Challenges SIVACON Type-testing is one of today s important issues for low-voltage technology and will
More informationIEC 60439 >>> IEC 61439 GUIDE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
xl 3 configurable assemblies IEC 60439 >>> IEC 61439 GUIDE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES XL 3 configurable assemblies guide to migration from IEC 60439 to IEC 61439
More informationCircuit Breakers. Next Generation of Protection Capabilities
Circuit Breakers Next Generation of Protection Capabilities Circuit Breaker Offering Rockwell Automation offers a full line of Allen-Bradley circuit breakers and motor protection devices to help meet many
More informationSECTION 26 09 13 - POWER MONITOR FOR ELECTRICAL, STEAM CONDENSATE, AND WATER PART I - GENERAL
SECTION 26 09 13 - POWER MONITOR FOR ELECTRICAL, STEAM CONDENSATE, AND WATER PART I - GENERAL 1.1 SUMMARY A. This section describes the requirements for the installation of Power Monitors and associated
More informationHMS Air-Insulated Medium-Voltage Metal-Clad Switchgear. Internal Arc Proof
HMS Air-Insulated Medium-Voltage Metal-Clad Switchgear Internal Arc Proof HMS Air-Insulated Medium-Voltage Metal-Clad Switchgear [ Internal Arc Proof ] CONTENTS 04 06 10 15 General Construction Dimensions
More informationSentron Series Circuit Breakers
Sentron Series Circuit Breakers Siemens Sentron Series circuit breakers are available in nine frame sizes: ED, FD, JD, LD, LMD, MD, ND, PD, and RD. Sentron Series circuit breakers have a wide range of
More informationHigh-Voltage Compact Switchgear 3AP1 DTC for 145 kv and 245 kv
High-Voltage Compact Switchgear AP1 DTC for 1 kv and kv Answers for energy. The AP1 DTC Complying with our Customers demands Experience you can rely on - at anytime, anywhere Decades of experience in high-voltage
More informationALTERNATIVE METHODS FOR INTERNAL ARC TESTS ON 12 KV AND 24 KV METAL-ENCLOSED SWITCHGEARS WITH COMPACT RMU
ALTERNATIVE METHODS FOR INTERNAL ARC TESTS ON 12 KV AND 24 KV METAL-ENCLOSED SWITCHGEARS WITH COMPACT RMU George CURCANU, Constantin ILINCA, Ilie SBORA ICMET Craiova, Romania, Calea Bucuresti 144, phone:
More informationCOMPARISON OF ANSI/IEEE AND IEC REQUIREMENTS FOR LOW- VOLTAGE SWITCHGEAR
COMPARISON OF ANSI/IEEE AND IEC REQUIREMENTS FOR LOW- VOLTAGE SWITCHGEAR Copyright Material IEEE Paper No. PCIC 2003-13 Eddie Wilkie Eaton Cutler-Hammer 3990 Old Tasso Road NE Cleveland, TN 37312 USA Abstract
More informationINTERNATIONAL POWER DISTRIBUTION CONGRESS CIDEL ARGENTINA 2002
INTERNATIONAL POWER DISTRIBUTION CONGRESS CIDEL ARGENTINA 2002 NEW GAS INSULATED SWITCHGEAR (GIS) FOR ALL MEDIUM VOLTAGE APPLICATIONS H. Fink, ABB Calor Emag Mittelspannungs GmbH; M. Hyrenbach, ABB Calor
More informationCircuit Breakers. NRC Series. NRC Series. 900 www.idec.com
Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,
More informationUFES Active protection for switchgear
Active protection for switchgear ABB AG Oberhausener Strasse 4047 Ratingen, Germany Phone: +49 0-0 Fax: +49 0-7 77 Note: We reserve the right to make technical changes or modify the contents of this document
More informationHVL 5 38 kv Load Interrupter Switchgear. The Standard for Performance, Protection and Dependability
HVL 5 38 kv Load Interrupter Switchgear The Standard for Performance, Protection and Dependability For a generation of engineers, Square D High Voltage Load (HVL ) Interrupter Switchgear by Schneider Electric
More informationBulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
More informationSingle-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window
More information49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
More informationLow Voltage Products. Switches Automatic Transfer Switches
Low Voltage Products Switches Automatic Transfer Switches Growing importance of a secure power supply Standby power is an integral part of many industrial and domestic electrical systems. High energy prices,
More informationT 3000. Substation Maintenance and Commissioning Test Equipment
T 3000 Substation Maintenance and Commissioning Test Equipment Multi function system for testing substation equipment such as: current, voltage and power transformers, all type of protection relays, energy
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationSIVACON The Versatile Low-Voltage Switchboard
s SIVACON The Versatile Low-Voltage Switchboard Type-Tested Power Distribution Board 8PT The Obvious Solution for Global Challenges SIVACON Type testing in low-voltage switchgear is increasingly becoming
More informationPressure monitoring equipment for oil-sf 6. bushings, type GOEK
Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and
More informationHow To Choose A Transformer
Consider open loop MV network as an example source 1 source 2 NC NC NC or NO main MV switchboard A B Detail design of substation NC NC NC NO NC NC switchboard 1 switchboard 2 switchboard 3 MV MV MV LV
More informationThe following components are common to most cubicles; this example is an ABB HK cubicle.
4.0 CIRCUIT BREAKER CUBICLE Learning Objectives The circuit breaker cubicle is the component of the switchgear that holds the circuit breaker, and the controls and cabling for the distribution system.
More informationCatalog. Arc Guard System TM TVOC-2
Catalog Arc Guard System TM TVOC-2 Introduction An even better Arc Guard System TVOC-2, ABB s latest Arc Monitor, builds on the well known TVOC design. Its new functions and features improve an already
More informationSeries 427. 1/16 DIN Multi-Mode Bar Graph Display Timer TIMERS PRODUCT HIGHLIGHTS
Series 427 1/16 DIN Multi-Mode Bar Graph Display Timer PRODUCT HIGHLIGHTS Digital Setting with 0.1% Accuracy Unique LED Bargraph Indicates Time Cycle in 20% Increments 8 Field Selectable Modes of Operation
More informationunderstanding medium frequency induction melting furnace and its components
understanding medium frequency induction melting furnace and its components 9 Spruce Street, Jersey City, NJ 07306 USA sales@electroheatinduction.com INDUCTION MELTING FURNACE AND ITS COMPONENTS The purpose
More informationThe following table shows approximate percentage wise the
SHORT-CIRCUIT CALCULATION INTRODUCTION Designing an electrical system is easy and simple, if only the normal operation of the network is taken into consideration. However, abnormal conditions which are
More informationFEDERAL ELECTRICITY & WATER AUTHORITY
UNITED ARAB EMIRATES FEDERAL ELECTRICITY & WATER AUTHORITY SPECIFICATION FOR 433 VOLTS SWITCHGEARS (LVAC BOARD) LVAC SWITCHBOARDS I N D E X CLAUSE TITLE 1. GENERAL 2. TEMPERATURE RISE 3. BUSBARS 4. CONSTRUCTION
More informationDead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms
Dead Tank Circuit Breaker 72PM40-C Proven reliability through common platforms ABB innovations for changing demands ABB (www.abb.com) is a leader in power and automation technologies that enables utility
More informationVario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
More informationSUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original
SUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original A motor starter is a combination of devices to allow an induction motor to start, run and stop according
More informationMEDIUM VOLTAGE SWITCHGEAR CATALOGUE. Code: P2490_xx
MEDIUM VOLTAGE SWITCHGEAR for secondary distribution CATALOGUE Code: P2490_xx CONTENTS 1 About us 2 Medium Voltage Business Unit Portfolio 3 Overview 8 Medium Voltage Switchgear Types. Equipment used.
More informationSample - No Commercial Use
COMPLETE REVISION October 2010 Electrical PIP ELSSG01 Design and Fabrication of Low-Voltage Metal-Enclosed AC Power Circuit Breaker Switchgear PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
More informationPrimary and Secondary Electrical Distribution Systems
Primary and Secondary Electrical Distribution Systems Critical Facilities Round Table 12th Quarterly Membership Meeting June 2, 2006 David D. Roybal. P.E. Eaton Electrical Cutler-Hammer Products Utility
More informationCatalog January. Heavy industrial power applications Motor contactors and starters
Catalog January Heavy industrial power applications Motor contactors and starters 2006 General contents 0 Heavy Industrial Power Applications Motor Contactors and Starters 1 Contactors and Starters, Type
More informationUNIVERSITY OF WASHINGTON Facilities Services Design Guide. Electrical. Switchboards. Basis of Design. Design Evaluation
Basis of Design This section applies to the design relating to low voltage switchboards. Design Criteria UW Class N1 facilities main switchboards shall be rear accessible. The main, tie and feeder breakers
More informationMedium Voltage Switchgear
Uniswitch Medium Voltage Switchgear 12 kv, 17.5 kv, 24 kv 630 A and 1250 A Operation and TABLE OF CONTENTS 1 Summary...1 1.1 General...1 1.2 Standards and specifications...2 1.3 Service conditions...3
More informationFAQs-Main switchboard design criteria
FAQs-Main switchboard design criteria Q: What is the Australian standard for main switchboards? Current Australian standard is AS/NZS 3439.1: 2002 originating from IEC 60439. The new series of standard
More informationKOLMA and IHDA Indoor type Cable Current Transformers Catalogue ABB Power Distribution ABB Transmit 1 KKOLMA 1 GB
KOLMA and IHDA Indoor type Cable Current Transformers Catalogue ABB Power Distribution ABB Transmit 1 KKOLMA 1 GB KOLMA and IHDA Indoor Type Cable Current Transformers Index Description... 3 Technical
More informationMotor circuit-breakers
Thermal-magnetic motor circuit-breakers type GV2-M GV2-M Thermal-magnetic motor circuit-breakers GV2-M Pushbutton control Standard power ratings Setting Magnetic Thermal Reference Weight of 3-phase motors
More informationElectrical Shore Connections / Cold Ironing
STANDARD FOR CERTIFICATION No. 2.25 Electrical Shore Connections / Cold Ironing JULY 2014 The electronic pdf version of this document found through http://www.dnv.com is the officially binding version
More informationADM1TE 5/30A DIN rail single phase two wire energy meter
ADMTE 5/30A DIN rail single phase two wire energy meter. Safety instruction.2 Foreword.3 Performance criteria.4 Specifications.5 Basic errors.6 Description.7 Dimensions.8 Installation.9 Operating.0 Troubleshooting.
More informationPlug and Socket Devices CES 63 A Series 8579
www.stahl.de > Switch socket / plug 63 A > Large switch handle with clear switch position indication padlockable in 0- and I-position > Low insertion and withdrawal forces through individually encapsulated
More informationTmax MCCBs. Molded case circuit breakers. Tmax
Molded case circuit breakers Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product performance. Never before has the industry seen such high
More informationEaton s E-Series protective relay family
E-Series protective relays Feeder distribution relays Motor relays Transformer relays Generator relays Eaton s E-Series protective relay family Microprocessor-based design Eaton s E-Series relay family
More informationPermissible ambient temperature Operation Storage, transport
The Sitras PRO combined DC protective unit and controller is used in the power supply for DC railways in mass transit and main-line systems up 3,000 V DC. It protects DC switch gear and contact line systems
More informationLV MCC LOW VOLTAGE SWITCHGEAR MOTOR CONTROL CENTRE PRODUCT GUIDE
LV MCC LOW VOLTAGE SWITCHGEAR MOTOR CONTROL CENTRE PRODUCT GUIDE 380/415/690 Volt AC 50/65/80/100 ka 1. Product Guide Low Voltage Motor Control Centre CONTSTRUCTION Continuous "poured in place" gasket
More informationEaton Safety & Reliability Solutions in the Oil & Gas Industry Electrical
Eaton Safety & Reliability Solutions in the Oil & Gas Industry Electrical Victor Lee Commercial Marketing Manager SEA Eaton Oil & Gas Solution Tech Day 2013 Eaton. All Rights Reserved. Eaton is a leading
More information3) What is the difference between "Insulating", "Isolating", and "Shielded Winding" transformers?
Tyco Electronics Corporation Crompton Instruments 1610 Cobb International Parkway, Unit #4 Kennesaw, GA 30152 Tel. 770-425-8903 Fax. 770-423-7194 1) What is a transformer and how does it work? A transformer
More informationPilot-wire differential relay for lines with two or more terminals
Pilot-wire differential relay for lines with two or more terminals Page 1 Issued: March 2003 Revision: A Data subject to change without notice Pilot-wire differential relay with RXHL 401 Features Phase
More informationAdvantages of Fixed Circuit Breaker Switchgear
Advantages of Fixed Circuit Breaker Switchgear by Lionel Mackay, EDF Energy, and Mike Adams, Schneider Electric Ltd Introduction The purpose of this paper is to review the advantages of fixed circuit breaker
More informationA good connection. International approvals.
E X - P L U G S A N D R E C E P T A C L E S A to A Plastic version for Zone and Zone A good connection Providing electrical energy there, where it is most needed even in hazardous areas for the Zones,,
More informationThe complete range of consumer switchboards and switchgear
Power Distribution The complete range of consumer switchboards and switchgear www.nhp.com.au/mod6 The MOD6 range of consumer switchboards and switchgear is specifically designed for domestic and commercial
More informationMetal Enclosed Switchgears Metal Clad Switchgears Gas Insulated RMU's
Metal Enclosed Switchgears Metal Clad Switchgears Gas Insulated RMU's Catalogue 2011 Aktif trade mark for Medium voltage switchgears, Switching equipment and Kiosks with high quality and environmentally
More informationUnit substation solutions with type SIMOSEC primary switches quick reference guide E50001-F710-A389-X-4A00. Answers for energy.
Unit substation solutions with type SIMOSEC primary switches quick reference guide E50001-F710-A389-X-4A00 Answers for energy. Unit substation solution with type SIMOSEC primary switches, dry-type transformer
More informationOVERCURRENT & EARTH FAULT RELAYS. To study the protection of equipment and system by relays in conjunction with switchgear.
OVERCURRENT & EARTH FAULT RELAYS Objective: To study the protection of equipment and system by relays in conjunction with switchgear. Theory: The function of a relay is to detect abnormal conditions in
More informationCurrent and voltage measuring relays
Current and voltage measuring relays RXIK 1, RXEEB 1 and Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice RXIK 1 RXEEB 1 (SE980082) (SE980081) (SE970869) Features Application
More informationMV, HV AND EHV SWITCHGEAR TESTING & COMMISSIONING
Training Title MV, HV AND EHV SWITCHGEAR TESTING & COMMISSIONING Training Duration 5 days Training Date MV, HV and EHV Switchgear Testing & Commissioning 5 20 24 Apr $3,750 Dubai, UAE In any of the 5 star
More information7.2KV SL400 Withdrawable Vacuum Contactor-Fuse Combination Units
Automotive Powering business worldwide Aerospace Eaton delivers the hundreds of power distribution products that are answering the demands of today s fast changing world. We help our customers worldwide
More information