Curriculum Vitae year in aerospace industry (Volvo Aero Corporation) in the production/manufacturing line.

Transcription

1 Curriculum Vitae Name: Abdallah Abou-Taouk: Address Home: Rosmaringatan 48, Angered Address University: Hörsalsvägen 7A, Gothenburg Contact: Mobile: BRIEF SUMMARY 10 years experience from CFD/Combustion within aerodynamics, combustion simulations, kinetic optimization, thermal analysis, heat transfer and turbulence modelling simulations divided into 5+ years in industry and 5 years as a Ph.D. and Postdoc in combustion and fluid dynamics. 1+ year in aerospace industry (Volvo Aero Corporation) in the production/manufacturing line. 5+ years in aerospace industry (GKN Aerospace Sweden and Volvo Aero Corporation) from both aerodynamic- and thermal simulations of civil jet engine components (turbine rear frame and mid turbine frame). I have also been worked with method development to improve design methods. 1+ year in Stirling engine/solar dish industry ( working as senior combustion chief engineer. Specialties: Aerodynamic, thermal and combustion simulations, Turbulence modeling, Kinetics and optimization of global schemes. Expertise: Ansys CFX and ICEM, Fluent, Matlab, Fortran, Chemkin, CEA, CANTERA, ModeFRONTIER. SKILLS Responsibility, orderly and pleasant. Work independently as well as in teams. Look always forward to new challengers. Motivated for new projects/jobs 1(7)

2 EDUCATION Academical Aug 2014 Sept 2009 June 2014 Feb 2013 April 2013 June 2006 Oct 2006 Aug 2002 Oct 2006 Chalmers University of Technology Post Doctor Project title: Prediction of Gas Turbine combustor performance based on optimal reduced kinetics and dynamic mode decomposition Chalmers University of Technology Doctor of Philosophy in Thermo and Fluid Dynamics Project title: Optimization of Chemical Kinetics and Numerical Simulations of Industrial Gas Turbine Burners INSA Rouen-France Guest Ph.D. at CORIA - INSA, Rouen, France. Joint collaboration with Professor Luc Vervisch and Professor Pascale Domingo Volvo Aero Corporation Masters Thesis, Heat Transfer In Turbine Mid Structures, Heat transfercalculations on the future designs of airplanes engines, dept 7161 Aerothermodynamics. Chalmers University of Technology Master of Mechanical Engineer 300 credits Focus MSc PROGRAMME IN COMPUTATIONAL AND EXPERIMENTAL TURBULENCE Senior High School Aug June 2001 Nils Ericssons Gymnasium The Volvo Aero programme with focus on Natural Science WORK EXPERIENCE Chalmers Industrial Technique Aug R&D Senior Engineer Post-Doc position (75% part-time work - 18 months project) at Applied Mechanics in Chalmers. The aim is to simulate Siemens Gas Turbine Burners with focus on instabilities. Forska och väx (15% part-time work - 18 months project). Founding from Energy Agency and Cleanergy in Sweden to develop and optimize kinetics for Landfill gases. Cleanergy ( Oct R&D Department - Chief Engineer Combustion 2(7)

3 Part-time work (10%) on investigating/developing new combustors in Stirling engines with main focus on developing new kinetics schemes for gasification fuels. Volvo Aero Corporation / GKN Aerospace Sweden ( Nov Dec 2012 Aerothermodynamics Dept Advanced CFD/Heat transfer simulations in several civil engine components (Turbomachinery). Projects: GEnX, GP7000, MTF, AIDA, AITEB, MRJ, BA, DREAM, SAGE4. Workpackage leader for DREAM and VU-leader. June Oct 2006 Aerothermodynamics Dept Masters Thesis, Heat Transfer In Turbine Mid Structures, Heat transfercalculations on the future designs of airplanes engines May Aug 2005 Aerothermodynamics Dept Worked with Fluent, Gambit and made some Fluid dynamics calculation on the component GEnX. Aug Aug 2006 Civilt flyg Dept Loading of Robots, drilling and montage of engine components. Aug June 2001 JT15- engine maintenance 15 weeks practice. Mount and dismount of smaller turbofan engines - JT15D. June July 2000 Material Lab Dept 9651 Office job and material testing June July 1999 Civilt flyg Dept 9290 Contribute and performed some basic day-to-day work in the laser machine, CNC-machine, control of components and some production technique-work. TEACHING/LEADERSHIP Course coordinator for MTF052 Basic Fluid Mechanics for M3 (7.5 ECTS credits), Chalmers University Lab, exercises and assignment teacher for the undergraduate course MTF052 Basic Fluid Mechanics for M3 (7.5 ECTS credits), Chalmers University Course coordinator, exercises and assignment teacher for the course TME085 Compressible flow in the 2 nd year of the Master program Solid and Fluid Mechanics MPAME 7.5 ECTS credits), Chalmers University. 3(7)

4 April April 2012 May 2013 Ibn Rushd Study Association Secretary of the study association named Ibn Rushd. NAVET Uddevalla Board member. NAVET is a local group which is located in the north of Uddevalla. May 2011 Nov 2013 President in the Ph.D. Student Council (Chalmers) Student council meets once a month and then discuss current issues relating to the institution s. Ph.D. President of the Council is member of the department's group of local interaction, in the Department Council and the Programme Council for Machinery Improvement leader over the heat transfer Group in Volvo Aero 2010 Workpackage leader for the EU project DREAM at Volvo Aero. Aug Aug 2006 Feb May 2006 RGM Recruiting committee Information and computer responsibility of the RGM, which manages the section for information and promotion of the engineering program machine to prospective students. As an information officer, I have also developed a material that is used in marketing. Evaluation responsible for the Master programme Turbulence SUPERVISION OF M.SC. THESES: 2012 S. M. Mohseni, Optimization of Global Reaction Mechanisms Evaluated on The Sandia Flame D, Chalmers University, Sweden. (30 ECTS credits) A. Khodabandeh, CFD Modelling of Generic Gas Turbine Combustor, Chalmers University, Sweden. (60 ECTS credits). REVIEW TASKS (2013 ) Reviews for archival international journals: Nuclear Engineering and Design (2014): Alexandria Engineering Journal (2013): 1 EXTRA COURSES 4(7)

5 2015 Management/Chief Education, Chalmers, Gothenburg 2014 OpenFOAM; Ph.D. course, Chalmers, Gothenburg 2012 Combustion Science, Lund. CECOST, LTH 7.5 credits 2012 Project Management The value Model, CTH 3.0 credits 2011 Turbulent Combustion course, VKI, Brussel Introduction to modefrontier 2010 Detailed Combustion Chemistry, CECOST, LTH 7.5 credits 2010 Compressible flow 7.5 credits 2009 Gas turbine technology 7.5 credits 2009 Introductory Course to Design Optimization ERCOFTAC, Berlin Ansys Structure training course 2007 RM12 General course 2007 ICEMCFD Training course The course covered the following products: Geometry preparation, Quad and Tri, Hexa and Tetra/Prism Meshing 2000 Basic Aero Engine Mechanic Training Basic course in fundamental montage of an Aero Engine. Focus: Manual of the engine, Technique of mounting, Technique of roller bearing, Technique of cleaning, Undestroyable testing. PUBLISHED ARTICLES 1. A. Abou-Taouk and L. E. Eriksson, 2011, Optimized Global Mechanisms For CFD Analysis of Swirl-Stabilized Syngas Burner for Gas Turbines, ASME Turbo Expo 2011, June 6-11, Vancouver, Canada. 2. A. Abou-Taouk, R. Whiddon, I. R. Sigfrid and L. E. Eriksson, 2011, CFD Investigation of Swirl- Stabilized Flexi-Fuel Burner Using Methane-Air Mixture for Gas Turbines, The 20th ISABE Conference, ISABE , September 12-16, Gothenborg, Sweden. 3. A. Abou-Taouk and L. E. Eriksson, Evaluation of Optimized 3-step Global Reaction Mechanism for CFD Simulations on Sandia Flame D, 2011, The 6th Symposium on Numerical Analysis of Fluid Flow and Heat Transfer, ICNAAM , September 18-25, Halkidiki, Greece. 4. A. Abou-Taouk, R. Whiddon, I. R. Sigfrid and L. E. Eriksson, A Four-Step Global Reaction Mechanism for CFD Simulations of Flexi-Fuel Burner for Gas Turbines, 2012, 7th International Symposium on Turbulence, Heat and Mass Transfer, Palermo, Italy. 5(7)

6 5. I.R. Sigrid, R. Whiddon, A. Abou-Taouk, R. Collin, and J.Klingmann, Experimental Investigations of an Industrial Lean Premixed Gas Turbine Combustor With High Swirling Flow, 2012, ASME Gas Turbine India Conference, GTIndia , Mumbai, India. 6. A. Abou-Taouk, S. Sadasivuni, D. L orstad and L. E. Eriksson, Evaluation of Global Mechanisms for LES Analysis of SGT-100 DLE Combustion System, 2013, ASME Turbo Expo 2013, GT , San Antonio, Texas, USA. 7. B. Farcy, A. Abou-Taouk, L. Vervisch, P. Domingo, N. Perret, Numerical Modeling of Selective Non Catalytic Reduction DeNOx Process, 2013, 7 th European Combustion Meeting, June, Lund, Sweden. 8. B. Farcy, A. Abou-Taouk, L. Vervisch, P. Domingo and N. Perret, Two approaches of chemistry downsizing for simulating selective non catalytic reduction DeNOx Process, Fuel, 118 (2014) A. Abou-Taouk, B. Farcy, P. Domingo, L. Vervisch, S. Sadasivuni and L. E. Eriksson, A new approach for Large Eddy Simulation of gas turbine partially premixed combustion using optimized chemistry, Submitted to Fuel,, A. Abou-Taouk, S. Sadasivuni, D. Lörstad, G. Bulat, L. E. Eriksson, CFD analysis and application of dynamic mode decomposition for resonant-mode identification and damping in an SGT-100 DLE combustion system, Final version submitted to 8 th European Combustion Meeting, 30 April-2 May, Budapest, Hungary, A. Abou-Taouk, P. Wetrell, L. E. Eriksson, CFD investigation in a Stirling engine based on MILD combustion and optimized chemistry for different fuels, Extended abstract submitted to 8 th International Symposium on Turbulence, Heat and Mass Transfer, Sarajevo, Bosnia, September 15-18, CERTIFICATES 2002 Certifierad operatör Education and examining, with very good result, of the Volvo Aero programme which give you a certificate accord the policy of VAC Swedish driving license, with the letter B LANGUAGE SKILLS Swedish Arabic English Mother tongue Mother tongue Very good skills COMPUTER SKILLS MS Office MATLAB Very good skills Good skills 6(7)

7 ICEM GAMBIT Ansys FLUENT Ansys CFX OpenFOAM Unix/Linux Mesh program for computational fluid dynamics. Very good skills. Mesh program for computational fluid dynamics. Very good skills. Computational fluid dynamic program. Very good skills. Computational fluid dynamic program. Very good skills. Computational fluid dynamic program. Good skills. Very good skills INTERESTS Fishing, swimming and training. Love the ocean and the ambient environment. Spend time with my friends and family which are of high value for me. 7(7)