Introducing the PC to TV Converter

Transcription

1 Introducing the PC to TV Converter Thank you for choosing KWorld PC to TV Converter This portable converter is your versatile equipment to transfer the on-screen content of your PC or laptop onto the screen of a TV or a projector. Since it s powered via USB interface, this small box-shaped converter will be the ideal and convenient tool for your presentation, lecture or seminar. Package Contents KWorld PC to TV Converter 1600 (the unit) USB Power Cable Y Cable Video Cable YCbCr Cable S-Video Cable Remote Control User Manual (this manual you are reading) Lithium battery x 1 (for the remote control) Features Automatically saves your adjustment settings Just plug and play, no software drivers or setup required Resolution up to 1600 x 1200 CVBS, S-VIDEO or RGB & YCbCr video outputs with a simple switch Horizontal and vertical size adjustment Powered by USB power cable, no DC power required. More environmental. Display computer contents to TV or monitors with VGA Simultaneous RGB and CVBS output signal available on RGB connector. 24 bit true color digitizer. YCbCr output with interlace formats including YUV,YCbCr and YPbPr. PAL/NTSC signal switch Brightness, output Contrast, output Hue, and output Saturation adjustment. Fine tune (Sharpness) and Flicker adjustment. On Screen Display (OSD) operation status.

2 Touch Buttons & Connection Ports of the Converter Overview of the Converter Box Connection Ports SCAN CNVTR: plug the Y-cable to this port for VGA input/output (another end of the Y-cable has to be connected to a monitor/pc). RGB OUT: Output RGB signal (RGB cable not included in this package) S-VIDEO OUT: Output S-VIDEO signal. Plug the S-Video cable to this port and connect to TV or VCR. VIDEO OUT: Output VIDEO signal. Plug the AV cable to this port and connect to TV or VCR. DC IN: plug the USB power cable to this port and this cable will obtain power via the USB port on PC YCbCr OUT: Output Y.Cb.Cr signal, connects to TV or VCR. YCbCr/RGB/CVBS: switch video output mode. (connect the YCbCr cable for YCbCRr output and the AV cable for CVBS)

3 Touch Buttons: POWER: turn on/off the power NTSC/PAL: switch between NTSC/PAL TV signals. MENU: turn on/off the menu ZOOM: zoom the image. RESET: returns to the default setting. UP/DOWN: move the image vertically. In the Menu mode, use these two buttons to select items on the menu. LEFT/RIGHT: move the image horizontally. In the Menu mode, use these two buttons to make your adjustments.

4 Installing the PC to TV Converter 1. Connect to a monitor with VGA port. Plug the USB head of the USB power cable into the USB port of the PC Connect one of the blue connector of the Y-cable to the VGA port of PC (it will have the word PC on the blue connector) Connect another blue connector of the Plug the black end of the Y-cable to the converter. Y-cable to the VGA port of the monitor. Plug the USB power cable (the gray one) into DC IN (for the USB power cable) and plug the ATTN: you must use the Y-cable supplied from KWorld. Other ones won t work with this product. AV cable (the yellow one) to the Video Out port. Then connect another end of the AV cable to a TV. 2. Once you have connected the converter to a monitor, then use either the AV cable (the yellow one), S-Video or YCbCr to TV.

5 Option: Connecting to a laptop Connect one of the blue connector of the Y-cable to the VGA port of PC (it will have the word PC on the blue connector) Plug the black end of the Y-cable to the converter. Plug the USB power cable (the gray one) into DC IN (for the USB power cable) and plug the AV cable (the yellow one) to the Video Out port. Then connect another end of the AV cable to a TV. Notes: Press "F4" and "Fn" to switch signal. Note: different laptop models have different F# key to switch signal. Consult you laptop manual or Manufacturer. Resolution & Refresh Rate Chart: Apple IPC Compatible Apple MAC G4,G4 imac, Resolution VGA mode Cubic,G3 imac DV Vertical frequency (Hz) 640x480 60,70,72,75,85,100,120 60,66,72,75,85,100, x600 56,60,70,72,75,85,100 56,60,72, 75,85, x768 60,70,72, 75 60,70,75 x

6 1152x864 60,70,72, 75 60,70 x 1280x x x 1280x x x 1600x x x Remote Control POWER: turn on/off the power RESET: returns to default setting N/P: NTSC/PAL signal switch ZOOM: zoom the image M: turn on/off the Menu FINE TUNE: fine tune the image to reduce FREEZE: Freezes the image. & : move the image vertically & : move the image horizontally

7 Menu To navigate the Menu, use the Up/Down buttons on the panel to select the items on the Menu. To make adjustments for the item selected, use the Left/Right buttons on the panel to do so. Items on the Menu: H-SIZE: adjust the size of the image horizontally V-SIZE: adjust the size of the image vertically FREEZE: turn on/off the freeze of image BRIGHTNESS: adjust Brightness CONTRAST: alter the Contrast HUE: adjust the Hue FLICKER: adjusts the flicker level OSD BACKGROUND: change the OSD background color RESET: return to factory default setting

8 FAQ Q1. I see color bars on my TV screen, what should I do? Answer: (1) Please follow the steps below and try to adjust the computer resolution and refresh rate.

9 (2) Please check if the cables are connected properly. (3) If you use AV/S-video cable,please switch the source to CVBS. If you use YCbCr cable,please switch the source to YCbCr. Q2. The TV screen is black, what should I do? Answer: (1) First, please make sure you are using the included Y-cable. Don t use other brand of cable to connect. (2) Please press N/P to switch the signal.

10 Q3. How can I get the sound? Answer: This PC To TV converter is made to deliver the contents in the computer onto TV screen. It doesn t provide the transfer of sound to TV. If you would like to have sound,you can use the audio cable shown below. Q4. The display is distorted (horizontal and vertical), and I cannot see the whole screen as shown on the computer. How can I solve it? Answer: Please press Menu"button on the remote control / the panel and adjust the horizontal and vertical size (H-SIZE and V-SIZE). Press the buttons on the remote control(up down left right ) to adjust the screen location to the center.