SAFETY WARNINGS. Important Safety Instructions. FCC Notice. Caution

Transcription

1

2 Table of Contents SAFETY WARNINGS...2 FCC Notice...2 Caution...2 Important Safety Instructions...2 Basic Instructions...3 Equipment checklist...3 Input Voltage...3 Power Indicator Light...3 Function Keys...3 Connections...4 Cable Connections...4 On Screen Display (OSD)...4 Menu Options...4 Explanation of Options...4 Specifications...6 Compatible Resolutions...6 Product Specifications...6 1

3 SAFETY WARNINGS To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to the Kogan customer support team. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Caution Changes or modifications not expressly approved of by Kogan.com could void the customers authority to operate the equipment and will void the warranty. Do not attempt to modify this product in any way without written authorisation from Kogan.com. To prevent fire or shock hazards, do not expose this product to rain or moisture. Important Safety Instructions Read, follow and keep a copy of these instructions. Heed all warnings. Do not use the monitor near water. Clean only with a dry, soft cloth. Do not block any ventilation openings. Do not install near any heat sources such as radiators, heaters, stoves or other appliances that produce heat. Unplug the monitor during lightning storms. Refer all servicing to qualified service technicians. Servicing is required when the monitor has been damaged in any way, such as the power-cord or plug being damaged, liquid spilled onto the monitor or objects have fallen into the ventilation openings. 2

4 Basic Instructions Equipment checklist Please ensure that your monitor has all of the following items: Monitor Base Quick Start Guide Power Cord VGA Cable Audio Cord DVI Cable Input Voltage AC 100~240V 50/60 Hz Power Indicator Light Indicator No light Green light Green light flashing Mode Power off Working normally No input signal Function Keys Key Function 1: Menu Show OSD menu/select function 2: Up Move icon up/increase value 3: Down Move icon down/decrease value 4: Exit Back to last menu/auto adjust 5: Scale Change ratio (wide or normal) 6: Source Display or change input signal 7: Turn monitor ON/OFF 3

5 Connections Cable Connections Power Audio VGA DVI Connect the power cord for you monitor to the AC IN port on the back of the monitor. Plug the power cord into a nearby power outlet. Use whichever connection is most suitable for your computer. On Screen Display (OSD) Menu Options 1. Colour adjust 2. Image adjust 3. Colour temp 4. Tools 5. Language 6. Misc Explanation of Options 1 Colour adjust 1.1 Brightness adjustment This option will adjust your display brightness. Use the up and down buttons to increase or decrease the brightness setting. 1.2 Contrast adjustment This option will adjust the amount of difference between white values and black values. Use the up and down buttons to increase or decrease the contrast. 1.3 DCR function Toggle Dynamic Contrast Ratio on or off. 4

6 2 Image adjust 2.1 Horizontal position adjustment This will adjust the horizontal position of the image on your display. This mode is only available in VGA mode. Use the up and down buttons to move your image from left to right. 2.2 Vertical position adjustment This will adjust the vertical position of the image on your display. This mode is only available in VGA mode. Use the up and down buttons to move your image up and down. 2.3 Phase adjustment Press up and down to start pixel sampling, to improve stabilization. 2.4 Clock adjustment Press up or down to adjust the clock image display to track image stability. 2.5 Sharpness function Press up or down to change the values to change the sharpness of the image. 3 Colour Temperature adjust This option will change the amounts of red, green and blue present in the image. Warm mode will give more reds, where as cool mode will give more blues. Select User mode to allow you to make you own adjustments to the red, green and blue levels. 4 Tools 4.1 OSD H-position adjustment This will change the horizontal positioning of the on screen display menu. Use the up and down buttons to change the position from left to right. 4.2 OSD V-position adjustment This will change the vertical positioning of the on screen display menu. Use the up and down buttons to change the position from up to down. 4.3 OSD Timer This will adjust how long the on screen display menus show on the screen. 4.4 Translucence This will adjust how transparent the menus are on the screen. 5

7 5 Language This allows you to select the language you would like the menu to appear in. Select between English, Spanish, French, Italian, Dutch or Korean. 6 MISC 6.1 Auto Configuration This will automatically adjust the image setting for the best viewing. 6.2 Auto Colour This will automatically adjust the colours in the image for the best viewing. 6.3 Factory Reset This will reset all of the values to their original default settings from the factory. Specifications Compatible Resolutions Standard Resolution H-Frequency (Khz) V-Frequency (Hz) VGA SVGA XVGA 720 x x x x x x x x x x 768 SXVGA 1280 x x WXGA 1360 x WXGA x WXGA x WSXGA x FHD 1920 x Product Specifications VGA Input Input interface D-SUB 15Pin Input signal DVI Input Input interface DVI-D 18Pin Audio in H-Frequency V-Frequency Input signal Analog 0.7pp anode signal/75 Ω 10bit digital signal Temp Storage Temp -20 C to 60 C Operation Temp 0 C to 40 C Humidity Operation 10% to 85% 2 x 2W 30~80KHz 60~75Hz 6