It s Simple! Demonstration Storyboard by Dot Garman
|
|
|
- Justina Welch
- 7 years ago
- Views:
Transcription
1 It s Simple! Demonstration Storyboard by Dot Garman Page 1
2 Screen #1 In this lesson you will learn about the six types of simple machines and how they make our lives easier. By the end of this module you will be able to sort and label simple machines into their correct categories. Simple Machines Lesson Objectives Students will accurately sort and label objects into the simple machine categories.. Page 2
3 Screen #1 Simple machines are devices that make work easier for us. Without any motorized parts, a simple machine will increase or change the force needed to accomplish a task. Simple Machines Tools for Making Work Simple Lever Wedge Simple machines are all around us. In fact, you have probably used a simple machine today. Do you have a bicycle? If so, the hand brake is a simple machine called a lever. Your bicycle chain uses a simple machine that is called a pulley, and the tire uses the wheel and axle simple machine. I m sure there are bolts on your bicycle... that is the simple machine called a screw. And if you rode your bike over a ramp, you used an inclined plane. Last, if you have ever experienced a flat tire, you could have run over a wedge simple machine, such as a thumbtack, nail, knife or razor. Let s move on to learn about each simple machine in more detail. Instructions for Interactivity Inclined Plane Pulley Screw Wheel & Axle The screen will open with the image of the bicycle. As each simple machine is mentioned, the item and its associated label will appear around the edge of the bicycle. Images and labels will appear in the following order: 1. Top left picture with label Lever. 2. Label Pulley and arrow pointing to the bike chain. 3. Label Wheel and Axle with arrow pointing to the wheel and axle. 4. Label Screw with arrow pointing to the screw on the handlebar. 5. Bottom left image with label Inclined Plane. 6. Top right image with label Wedge. Page 3
4 Screen #2 Simple Machine - Lever Let s start with the simple machine called a lever. A lever is a straight, solid item that is supported against another object. The object that supports the lever is called a fulcrum. Levers make our lives simpler by helping us do common tasks. Did you turn on a light switch lately? If so, you used a lever! If you ever handed in an assignment that was more than one page, you may have used a lever to keep them together a stapler. A fun recess activity for young children is playing on a lever called a seesaw or teeter-totter. And we all use a very common lever every day, the little handle that flushes the toilet. What other levers have you used recently? Functional Instructions The screen will open with the text only. As each item is mentioned, it will appear on the screen. Items will appear in the following order: - Light Switch - Stapler - Seesaw - Toilet Page 4
5 Screen #3 Wedges Now let s talk about the simple machine called a wedge. A wedge is used to cut, chip, or push items apart. A wedge will normally have at least one side that is slanted with a narrow or sharp edge that cuts, splits, or opens the object. Some examples of wedges are: Scissors Knives Door stops Chisels Functional Instructions The screen will open with the text only. As each item is mentioned, it will appear on the screen. Page 5
6 Screen #4 Let s take a moment to see if you can distinguish between a lever and a wedge. Drag each picture to the correct area. CA: Nice job! You have identified different lever and wedge simple machines. What is a lever and what is a wedge? Levers Wedges Instructions for Interactivity Display items on the screen with instructions As students drag the items, they will snap in place if they select the correct area. As students drag the items, they will snap back if they select the in correct area. Correct answers: Stapler and seesaw are levers. Axe and hedge trimmers are wedges. When all items are correct, display CA. Page 6
7 Screen #5 A pulley uses grooved wheels with a rope, cord, or chain to move objects. Pulleys simplify our lives by allowing us to move heavy objects or things that are in hard to reach places. Some examples include: Pulleys Elevators Buckets in wells Theatre style curtains Construction equipment Functional Instructions The screen will open with the text only. As each item is mentioned, it will appear on the screen. Page 7
8 Screen #6 The inclined plane is a flat surface that is arranged at a slant. It makes life simpler by allowing things to be moved with less effort. Some examples include: Inclined Plane Ramps Slides Bathtubs (the bottom of the bathtub is slanted to allow water to drain out) Functional Instructions The screen will open with the text only. As each item is mentioned, it will appear on the screen. Page 8
9 Screen #7 Let s do another check of your knowledge of simple machines. Drag the text box inclined plane to the image of an inclined plane. Drag the text box pulley to the image of the pulley simple machine. CA: Well done! You understand what simple machines are pulleys and inclined planes. Inclined Plane Pulley Instructions for Interactivity Display items on the screen with instructions As items are moved to the correct picture, they will snap in place. As items are moved to incorrect pictures, they will snap back. Correct answers are: Handicap vehicle ramp is an inclined plane. Construction pulley is a pulley. When both items are correct, display CA. Page 9
10 Screen #8 Another simple machine is the screw. Basically, it is an inclined plane wrapped around a cylinder. They simplify our life by holding things down or together. Some examples of screws are: Screw <Sketch a representation of on-screen visuals here.>> Drill bits Jar lid Light bulbs Functional Instructions The screen will open with the text only. As each item is mentioned, it will appear on the screen. Page 10
11 Screen #9 The last simple machine is made up of two parts, a wheel and an axle. The axle is a rod that is placed through the wheel. As the axle turns, it moves the wheel. It makes our lives easier as it allows us to move objects that we would not be able to move on our own. Some examples include: Wheel and Axle Tires on cars and bicycles. Roller skates Pencil sharpener Functional Instructions The screen will open with the text only. As each item is mentioned, it will appear on the screen. Page 11
12 Screen #10 We will now pause to see if you can distinguish between the six simple machines. Click on a picture and drag to the name of the simple machine. Wheel and Axle Wedge CA: Well done! You have successfully identified the six simple machines. Inclined Plane Pulley Screw Lever Instructions for Interactivity Display items on the screen with instructions. A line will be drawn from the picture to the word as the student drags and drops. If the item is correct, the line will remain in place. If the item is incorrect, the line will disappear and beep sound will play. Correct answers are: Page 12
13 Wheel and axle is the roller paint brush. Wedge is the fireman prying open a door. Inclined plane is the treadmill. Pulley is the construction equipment hoisting a big blue box. Screw is the light bulb. Lever is the nutcracker. When both items are correct, display CA. Page 13
Partnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools
Partnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools Supported by: National Science Foundation Simple Machines: 4.G.1 Introduction to Simple Machines
Compound Machine: Two or more simple machines working together to make work easier. Examples: Wheelbarrow, Can Opener, Bicycle
Name SOL 4.2 Simple and Compound Machines NOTE - Simple machines are NOT included in the 5 th REVISED Science Standards Simple Machine: A machine with few or no moving parts. Simple machines make work
Simple Machines. What are simple machines?
Definitions to know: Simple Machines Work done when an applied force causes an object to move in the direction of the force Energy ability to cause change; can change the speed, direction, shape, or temperature
Mechanical Reasoning Review
Mechanical Reasoning Review Work can be made easier or faster through practical applications of simple and/or compound machines. This is called mechanical advantage - in other words, using the principal
What are simple machines? primary
What are simple machines? primary Here you will discover all sorts of interesting things about simple machines and how they work. There are some great diagrams as well! A machine is something that makes
Directed Reading A. Section: Types of Machines LEVERS
Skills Worksheet Directed Reading A Section: Types of Machines 1. A knife is actually a very sharp. 2. What are the six simple machines that all other machines are made from? LEVERS 3. A simple machine
ANSWER KEY. Work and Machines
Chapter Project Worksheet 1 1. inclined plane, wedge, screw, lever, wheel and axle, pulley 2. pulley 3. lever 4. inclined plane 5. Answers will vary: top, side, or bottom 6. Answers will vary; only one
Fulcrum Effort or Applied Force. Fulcrum Load or Resistance. Effort or Applied Force. Load or Resistance. Other First Class Lever Examples.
First Class Lever Second Class Lever Load or Resistance Fulcrum Effort or Applied Force Fulcrum Load or Resistance Effort or Applied Force Other First Class Lever Examples Action Spring Force Load Applied
Simple Machines Quiz
Simple Machines Quiz Part 1. Write the name of the simple machine that is described questions 1-4 below. Word Bank: Wheel & Axle Screw Pulley Inclined Plane Lever 1. These two parts act as one simple machine.
Simple Kitchen Machines
Provided by TryEngineering - Lesson Focus Lesson focuses on simple machines and how they can be found in many everyday items. Students explore the different types of simple machines, how they work, and
Simple machines provide a mechanical advantage that makes our work faster and easier, and they are all around us every day.
LEARNING MODULE: SIMPLE MACHINES Pre-Visit Activities We suggest that you use these pre-visit classroom acitivites to prepare your students for a rewarding Museum visit. Before your visit, introduce your
Engineer III Simple Machines
Harford District 2014 Cub Scout Day Camp June 23-78 Knights of the Roundtable Engineer III Simple Machines Station Volunteer s Guide Thank you for being a station volunteer! The stations are the heart
April Cousins Jessica Denson TEDU 414 Unit Plan Unit Plan: Simple Machines 3 rd Grade Unit Introduction: This unit focuses on use and functions of
April Cousins Jessica Denson TEDU 414 Unit Plan Unit Plan: Simple Machines 3 rd Grade Unit Introduction: This unit focuses on use and functions of simple machines and their importance in our everyday lives.
Everyday Simple Machines
Everyday Simple Machines Teacher's Guide Editors: Brian A. Jerome Ph.D. Stephanie Zak Jerome Assistant Editors: Louise Marrier Hannah Fjeld Graphics: Fred Thodal Heidi Berry Lyndsey Canfield www.visuallearningco.com
Name Class Date. Pulley. Wedge
CHAPTER 13 2 Simple Machines SECTION Work and Energy KEY IDEAS As you read this section, keep these questions in mind: What are simple machines? What simple machines are in the lever family? What simple
Inclined Plane: Distance vs. Force
1a Inclined Plane: Distance vs. Force Look at the inclined plane model you built for Card 2. It s a ramp, so it s easy to slide or roll things up and down it. As you noticed, it is a little more difficult
You ll have leverage as you guide
Teacher s Guide Simple Machines Dear Educator, You ll have leverage as you guide students in the exploration of simple machines. In KIDS DISCOVER Simple Machines, your young scientists will learn about
Playful machines A Facilitator s Guide to Simple Machines in the Playground
inspiring discovery Playful machines A Facilitator s Guide to Simple Machines in the Playground Our Vision Canadians recognize that Science 1 is intrinsic to their lives and acknowledge the fundamental
Simple Machines. Preparation. Objectives. Standards. Grade Level: 3-5 Group Size: 25-30 Time: 60 Minutes Presenters: 3-4
Simple Machines Preparation Grade Level: 3-5 Group Size: 25-30 Time: 60 Minutes Presenters: 3-4 Objectives This lesson will enable students to: Describe and define simple machines. Identify simple machines
Clipper Creations. Provided by TryEngineering - www.tryengineering.org Click here to provide feedback on this lesson.
Provided by TryEngineering - Click here to provide feedback on this lesson. Lesson Focus Develop a working model of a nail clipper. Note: This lesson plan is designed for classroom use only, with supervision
When you have completed this lesson you will be able to: identify some common simple machines explain how simple machines make work easier
Simple machines OBJECTIVES When you have completed this lesson you will be able to: identify some common simple machines explain how simple machines make work easier A machine is an invention that makes
SCIENCE STD. V (2015) More About Force Energy and Simple Machines. Name Roll No. Date Std. V
SCIENCE STD. V (2015) More About Force Energy and Simple Machines Name Roll No. Date Std. V Q1.What is Force? Force is a push or a pull that makes the things move. Q2.What effect does Force has on our
Simple Machines TOUR EDUCATOR S GUIDE PRE- AND POST-VISIT LESSON PLAN IDEAS & STRATEGIES / GRADES: 4 TH - 8 TH
Simple Machines TOUR EDUCATOR S GUIDE PRE- AND POST-VISIT LESSON PLAN IDEAS & STRATEGIES / GRADES: 4 TH - 8 TH Overview Simple machines have played a large role in human history, supporting our everyday
PUSH AND PULL: SIMPLE MACHINES AT WORK
PUSH AND PULL: SIMPLE MACHINES AT WORK 1 videocassette... 23 minutes Copyright MCMXC Rainbow Educational Media 4540 Preslyn Drive Raleigh, NC 27616-3177 Distributed by: United Learning 1560 Sherman Ave.,
Pre and Post-Visit Activities
Pre and Post-Visit Activities Simple Machines Table of Contents: Important Information: 2 Vocabulary: 3 Pre-Visit Activities: 4 Post-Visit Activities: 5 Vocabulary Word Search: 6 2 Important Information
Levers for Lifting BROWARD COUNTY ELEMENTARY SCIENCE BENCHMARK PLAN ACTIVITY ASSESSMENT OPPORTUNITIES. Grade 3 Quarter 3 Activity 23
activity Levers for Lifting BROWARD COUNTY ELEMENTARY SCIENCE BENCHMARK PLAN Grade Quarter Activity SC.C... The student understands that the motion of an object can be described and measured. SC.H... The
The origin of the wedge is unknown, because it has been in use as early as the stone age.
Simple Machines Compiled and edited from Wikipedia Inclined Plane An inclined plane is a plane surface set at an angle, other than a right angle, against a horizontal surface. The inclined plane permits
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING for ACCESS TO APPRENTICESHIP SCIENCE SKILLS SIMPLE MACHINES & MECHANICAL ADVANTAGE AN ACADEMIC SKILLS MANUAL for The Construction Trades: Mechanical
Georgia Performance Standards Framework for Physical Science 8 th GRADE. Unit: Fast and Furious Forces General Task Life is Easy with Simple Machines
Subject Area: Physical Science Grade: 8 Unit: Fast and Furious Forces General Task Life is Easy with Simple Machines S8P3. Students will investigate relationship between force, mass, and the motion of
Simple Machines integrated Math & Science lessons
Simple Machines integrated Math & Science lessons Activities: Six Do it All Tilling with Tools Description: Students will learn the six simple machines that do it all! After, students will understand that
INCLINED PLANE LEVER SCREW WHEEL & AXLE WEDGE PULLEY
HANDBOOK Machines are tools that help people do work more easily. In physics, you do work anytime you use force to move an object. Skateboards, cars, bikes, shovels, boats, doors, light switches, and stairs
SIMPLE MACHINES MADE SIMPLE
SIMPLE MACHINES MADE SIMPLE Grade Level or Special Area: 2 nd Grade Science Written by: Jan Polzin, Lincoln Academy Charter School, Arvada, Colorado Length of Unit: 10 lessons (nine science and one writing,
Simple Machines. Integration across the SESE curriculum History Curriculum:
Simple Machines Integration across the SESE curriculum History Curriculum: There are natural links between the theme of Simple Machines and a number of strands in the history curriculum: 1) Continuity
Levers and Pulleys. 5 th Grade Science Investigation. Unit
Levers and Pulleys 5 th Grade Science Investigation Unit What Do We Already Know? A lever and pulley are mechanical advantages=makes work easier, and helps lift things you couldn t t normally lift Combined
Quick and Easy Simple Machine Experiments to Share with Your Kids
Quick and Easy Simple Machine Experiments to Share with Your Kids By Aurora Lipper Pulleys and levers are simple machines, and they make our lives easier. They make it easier to lift, move and build things.
Mechanical Systems. Grade 8 Unit 4 Test. 1. A wheelbarrow is an example of what simple machine? Class 1 lever. Class 2 lever.
Mechanical Systems Grade 8 Unit 4 Test Student Class 1. A wheelbarrow is an example of what simple machine? D Wheel and Axle 2. A hockey stick is an example of what simple machine? D Inclined plane 3.
PUTTING THE SIMPLE IN SIMPLE MACHINES
CORE KNOWLEDGE NATIONAL CONFERENCE ORLANDO, FLORIDA APRIL 29 - MAY 1, 1999 PUTTING THE SIMPLE IN SIMPLE MACHINES Grade Level: Presented by: Length of Unit: Second Lou Tucker, Donna Cueto, Ridge View Elementary,
Simple and Complex Machines
Simple and Complex Machines A Science A Z Physical Series Word Count: 1,230 Simple and Complex Machines Written by Ned Jensen Visit www.sciencea-z.com www.sciencea-z.com Simple and Complex Machines Key
Partnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools
Partnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools Supported by: National Science Foundation Simple Machines: 4.G.2 _ Inclined Planes and Pulleys Grade
PuLLeys. SaraH TieCK. Simple Machines
PuLLeys i p e m h e SaraH TieCK s m l a c i n s Simple Machines s i m p e m l a c h i n e s PuLLeyS A Buddy Book by SaraH TieCK VISIT US AT www.abdopublishing.com Published by ABDO Publishing Company,
Lesson Plans. Teacher: High School Physical Science Grade: 9th. Curricular Areas/s: Simple machines and mechanical advantages
Lesson Plans Teacher: High School Physical Science Grade: 9th Curricular Areas/s: Simple machines and mechanical advantages Standard/s: Understand and apply knowledge of motions and forces Objects change
Physical Science Worksheet
Physical Science Worksheet GRADE LEVEL: Third Topic: Motion of Objects Grade Level Standard: 3-3 Compare the common forces and the motion of objects. Grade Level Benchmark: 4. Identify and use simple machines
The Lever. The law of conservation of energy applies to all machines!
Simple Machines A machine is a device for multiplying forces or simply changing the direction of forces. Many machines can increase the speed with which work is done. The Lever The law of conservation
Simple machines. Law of Simple Machines. Resistance Force x resistance distance = effort force x effort distance
Simple machines A simple machine is a evice that requires only the force of a human to perform work. One of the properties of a simple machine is that it can be use to increase the force that can be applie
Christa s Lost Lessons Simple Machines
Christa s Lost Lessons Simple Machines Introduction: Among the six lost lessons, the simple machines demonstration was most rudimentary. Perhaps, it is because most earth-based simple machines are crafted
2.) In general, what do most simple machines do? Simple machines make work easier by reducing the force needed.
Name: Simple Machines Study Guide Force and Work- 1.) To be considered work, you have to have a force and a distance through which the force acts. 2.) What is the formula for work? work = force x distance_
Overall Indicator: The student: recognizes the effects of forces acting on structures and mechanisms
Grade 5 Performance Task: Disaster Recovery Content Connections Assessment Criterion Understanding of basic concepts Overall Indicator: The student: recognizes the effects of forces acting on structures
Tree House Escape. Design Challenge Learning. https://www.thetech.org/educators/design- challenge- learning
A frightened friend is stranded in a treehouse and needs help getting out! In this design challenge students explore how simple machines can make work easier while they design a device to retrieve their
Unit 4 Mechanical Systems Learning Pack (Science In Action 8)
1 2 Focus in Action UNIT LEARNING PACKS These booklets are designed to provide Grade 8 students with all the resources needed to review or reinforce concepts, covered in the Alberta Science Curriculum,
Roanoke Pinball Museum Key Concepts
Roanoke Pinball Museum Key Concepts What are Pinball Machines Made of? SOL 3.3 Many different materials are used to make a pinball machine: 1. Steel: The pinball is made of steel, so it has a lot of mass.
Property of Science Playground ACTIVITY BOOKLET
Property of Science Playground ACTIVITY BOOKLET Table Contents Simple Machines Discovery Box Contents Introduction to the Discovery Boxes Directions for Using the Discovery Box Activity Booklet Teaching
7 TH GRADE SCIENCE REVIEW
7 TH GRADE SCIENCE REVIEW The motion of an object is always judged with respect to some other object or point. When an object changes position over time relative to a reference point, the object is in
Second Grade, Levers and Pulleys and Gears, Oh My! 2005 Colorado Unit Writing Project 1
Levers and Pulleys and Gears, Oh My! Grade Level or Special Area: 2 nd Grade, Science Written by: Amy Hoen, Academy Elementary School, Westminster, CO Length of Unit: Six lessons (approximately six days;
Unit 4 Practice Test: Rotational Motion
Unit 4 Practice Test: Rotational Motion Multiple Guess Identify the letter of the choice that best completes the statement or answers the question. 1. How would an angle in radians be converted to an angle
Simple Machines Design Project. Project Guide
Simple Machines Design Project Project Guide Freetal i g i D pler! Sam Table of Contents Simple Machines Design Project Digital Sample Project Guide Project Guide: Table of Contents Teacher Background
BOARD OF SUPERVISORS. Lisa M. Garrett, Director of Personnel. To Enrich Lives Through Effective and Caring Service
COUNTY OF LOS ANGELES Department of Human Resources Workforce Planning, Test Research, and Appeals Division 3333 Wilshire Blvd., Ste. 350, Los Angeles, CA 90010 24-Hour Jobline: (800) 970-LIST http://dhr.lacounty.info
-------------------------------------------------------------------------------------------------------------------
Name: Date: D. Thomassen 2007 Machines by Lillian Duggan answer key Colorado Model Content Standard #2: Physical Science: Students know and understand common properties, forms, and changes in matter and
MECHANICAL PRINCIPLES OUTCOME 4 MECHANICAL POWER TRANSMISSION TUTORIAL 1 SIMPLE MACHINES
MECHANICAL PRINCIPLES OUTCOME 4 MECHANICAL POWER TRANSMISSION TUTORIAL 1 SIMPLE MACHINES Simple machines: lifting devices e.g. lever systems, inclined plane, screw jack, pulley blocks, Weston differential
Machines. Simple. What is a machine?
Simple Machines Worksheet 2 A worksheet produced by the Native Access to Engineering Programme Concordia University, Montreal What is a machine? Webster s Dictionary defines a machine as 1. a structure
Convertible Top Hydraulic Cylinder Removal Manual for W124 E-Class Convertibles 1993-1995 Models 300CE (1993) and E320 (1994-1995)
Convertible Top Hydraulic Cylinder Removal Manual for W124 E-Class Convertibles 1993-1995 Models 300CE (1993) and E320 (1994-1995) Written by Samit Ghosh with picture material from vexed of benzworld.org
BODY-12, Door Handle - Removal, Installation, and Adjustment
Introduction BODY-12, Door Handle - Removal, Installation, and Adjustment There are many different procedures floating around describing how to replace the door handles on a 944 and every one of them will
Write your answer to question 23 in the space provided on page _ of your Student Response Booklet.
Write your answer to question 23 in the space provided on page _ of your Student Response Booklet. 25907 OR F:4A Q:23 Sect:B Content:50 Linking Artid: 25907bike Bicycle Design Use the illustration of a
3rd/4th Grade Science Unit: Forces and Motion. Melissa Gucker TE 804 Spring 2007
3rd/4th Grade Science Unit: Forces and Motion Melissa Gucker TE 804 Spring 2007 Part I: Learning Goals Documentation Unit Title: Forces and Motion Grade Level: 3 rd Designer: Melissa Gucker The Main Idea(s)/Importance
Activity 7.4 Assembly Models
Page 1 of 7 Activity 7.4 Assembly Models Introduction Have you ever pieced together a jigsaw puzzle? The individual puzzle pieces have to be rotated and sometimes flipped around. A piece that makes up
Left to His Own Devices
Left to His Own Devices Student A TASK ONE Sit with two other "A" students. What are the names of all the different items? Together with your group, write the words of these things. What are all of these
Force and Motion: Ramp It Up
Force and Motion: Grade Level: 4-5 Time: 3 class periods By: Carrie D. Perry (Bedford County Public Schools) Overview After watching an engaging video on Olympic alpine skiers, students then participate
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13
STEADYfast Stabilizer Installation Notes Fifth Wheel and Travel Trailers 11/23/13 (See Supplemental Instructions for trailers with heavy duty round footplates and/or Power Leveling Systems) PHONE SUPPORT
DR ALL-TERRAIN FIELD and BRUSH MOWER
DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar
INGROUND, ROPED, AND HOLELESS JACK SEAL REPLACEMENT
D. L. Martin Company INGROUND, ROPED, AND HOLELESS JACK SEAL REPLACEMENT TYPICAL HYDRAULIC JACK HEAD ASSEMBLY 1 TOOLS REQUIRED: 1) Container to hold hydraulic fluid. 2) Clean rags and protective covers
F output. F input. F = Force in Newtons ( N ) d output. d = distance ( m )
Mechanical Advantage, Speed Ratio, Work and Efficiency Machines Make Work Easier Machines help people do things that they normally couldn t do on their own. Mechanical Advantage A machine makes work easier
Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic
Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic Coated Paper 2 Balsa Sheets (10-1/2 x4 x3/16 ) 2 Alligator
Cluster 3: Forces and Simple Machines
Grade 5 Cluster 3: Forces and Simple Machines Overview In this cluster, students increase their understanding of forces through the study of simple machines. Emphasis is placed on investigating a variety
CHAPTER 82. Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
NOTES : CHAPTER 82 Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure or pedicure
Simple Machines. Terri Wakild. South Haven Public Schools
Simple Machines Terri Wakild South Haven Public Schools April, 2006 Participant in Research Experience for Teachers (RET) Workshop at Western Michigan University 2005-06 Academic Year Simple Machines Grade
PART2Machines. Measuring Work on a Cart on an. Inclined Plane 102. Inclined Plane 104. Inquiry 12.1 Using Pulleys To Do Work 112
TERRY G. MCCREA/SMITHSONIAN INSTITUTION PART2Machines LESSON 11 The Inclined Plane 100 Inquiry 11.1 Inquiry 11.2 Measuring Forces on a Cart on an Inclined Plane 102 Measuring Work on a Cart on an Inclined
4th GRADE MINIMUM CONTENTS UNIT 13: MATERIALS & MACHINES
MATERIALS What are materials? 4th GRADE MINIMUM CONTENTS UNIT 13: MATERIALS & MACHINES Materials are the substances that we use to make something. We use material for building, making tools, making clothes,
Simple Machines. Student s worksheets. Carles Egusquiza Bueno. IES Rocagrossa Lloret de Mar. CLIL Course. Norwich Institute for Language Education
Simple Machines IES Rocagrossa Lloret de Mar CLIL Course Norwich Institute for Language Education January March 2010 CONTENTS Contents...2 Unit 1: Force, work and machines...3 Lesson 1: Force...4 Lesson
The Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual. The sections that are found in the Engine Chapter are now renumbered.
NUMBER: 08 DD15-5 S.M. REF.: 1.11 ENGINE: DD15 DATE: July 2008 SUBJECT: CRANKSHAFT OIL SEAL SECTION PUBLICATION: DDC-SVC-MAN-0002 The Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual.
Rebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
DIY CABINET REFACING INSTALLATION GUIDE
DIY CABINET REFACING INSTALLATION GUIDE CABINET REFACING INSTALLATION Are you ready to reface your outdated cabinets? This guide will show you how to install your new Facelifters Cabinet Refacing Products
Go-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
Simple Machines. Figure 2: Basic design for a mousetrap vehicle
Mousetrap Vehicles Figure 1: This sample mousetrap-powered vehicle has a large drive wheel and a small axle. The vehicle will move slowly and travel a long distance for each turn of the wheel. 1 People
2. This is a close up of a typical area where the rocker is rusted out leaving holes under where the rocker moulding would be..
ROCKER PANELS 55,56,57 CHEVY REPLACEMENT Do not throw away any pieces when you first remove them. There are many supports that are not reproduced and will need to be used again. When disassembling try
Installing RNS-E SAT NAV for Audi A4
As one of the major options on the A4 you can get a DVD Satellite Navigation System call the RNS-E. With the help of ebay these sat nav systems are now available to by at a rough cost of 650 plus the cost
Mechanical & Electrical Reasoning Study Guide
Mechanical & Electrical Reasoning Study Guide About Mechanical Aptitude Tests Who is likely to take a mechanical reasoning test? Mechanical aptitude tests are commonly administered during pre-employment
Using mechanical energy for daily
unit 3 Using mechanical energy for daily activities Physics Chapter 3 Using mechanical energy for daily activities Competency Uses mechanical energy for day-to-day activities Competency level 3.1 Investigates
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
SHELVES. www.tedswoodworking.com
SHELVES It's rare that bookshelves look as interesting as the objects you display on them. After all, how much can you decorate the edges of your shelves and sides? This unit is unusual because the shelves
Tour of the Pantograph Planner
(714) 989-6891 Instructions for PANTOGRAPH PLANNER The Pantograph Planner helps to free the quilter from the frustrations of positioning the rows for edge to edge quilting. This document provides step
Chapter 8: Rotational Motion of Solid Objects
Chapter 8: Rotational Motion of Solid Objects 1. An isolated object is initially spinning at a constant speed. Then, although no external forces act upon it, its rotational speed increases. This must be
18974 (736) Singer No. 20-2. SINGER No. 20-2 ELECTRIC SEWING MACHINE INSTRUCTION MANUAL
SINGER No. 20-2 ELECTRIC SEWING MACHINE INSTRUCTION MANUAL Next Page Main Parts Accessories To start the Motor To Stop the Motor To Change the Speed Needles and Thread Relative Sizes of Needle and Thread
Installation instructions, accessories - Handsfree for cellular phone, system B, entry level
XC90 Section Group Weight(Kg/Pounds) Year Month 3 39 0.5/1.1 2006 07 XC90 2003, XC90 2004 IMG-249663 Page 1 of 18 Required tools A0000162 A0000163 IMG-239664 M0000232 IMG-253123 IMG-252223 Page 2 of 18
Getting to know your computer
Getting to know your computer Introduction This is intended to be a very basic introduction to personal computers (PCs) which will enable you to: switch them on and off understand what is shown on the
INSTALLATION INSTRUCTIONS for Premium Pocket Windows (JII022) IMPoRtaNt INFoRMatIoN & glossary. safety & HaNdlINg
Thank you for selecting JeLd-weN products. Attached are JeLd-weN s recommended installation instructions for pocket (replacement) double-hung, casement, awning, picture or transom windows, designed to
Student Exploration: Pulleys
Name: Date: Student Exploration: Pulleys Vocabulary: effort, load, mechanical advantage, pulley, pulley system Prior Knowledge Questions (Do these BEFORE using the Gizmo.) 1. Suppose you had to haul a
Instructions: General American 8,000 Gallon Acid Tank Car Kit 12/2014
Instructions: General American 8,000 Gallon Acid Tank Car Kit 12/2014 Thank you for purchasing the Tangent Scale Models General American 8,000 Gallon Welded Acid Tank Car Kit! A few quick notes before
If you are packing up your property yourself, please follow these tips-
Before you move Utilities Your gas, electric, water and telephone companies will all need to be informed of your move. It is a good idea to inform them of your removal day at least a week prior. They will
STEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER
14 14 STEERING HANDLEBAR/FRONT WHEEL/ SCHEMATIC DRAWING ------------------------------------------------- 14-1 SERVICE INFORMATION------------------------------------------------ 14-2 TROUBLESHOOTING-----------------------------------------------------
Your Simple Guide to Battery. www.firstalertpro.com. Replacement. Customer Care: 1-800-852-0086. www.firstalertpro.
Previous Menu Your Simple Guide to Battery www.firstalertpro.com Replacement p e t s ts ep -by Customer Care: 1-800-852-0086 FA/1565 9/00 www.firstalertpro.com Table of Contents: page Introduction...............................
Study Guide CCA week 12 - Key
Study Guide CCA week 12 - Key Vocabulary to know: (define on separate paper & give an example of each) Electrical Energy Mechanical Energy Force Energy carried by electricity Ex: Toaster, Fan, Anything