MIG/TIG ARC WELDING FOR STAINLESS STEELS & CARBON STEELS
|
|
- Lewis Harrington
- 7 years ago
- Views:
Transcription
1 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS
2 SM-308 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS WS 5.9 / SME SF5.9 ER308 JIS Z3321 Y308 MIG welding of 18%Cr-8%Ni steel for chemical industries such as oil, medical, fertilizer and textile industries and for nuclear reactors. Though SM-308 is austenitic type stainless steel wire, the weld metal contains ferrite and resistance to crack is extremely good. The usability, such as arc stability and assimilability of welds to base metal is extremely good. Resistance to corrosion and the mechanical properties of the weld metal are good. Typical Chemical Composition of ll-weld Metal (%) T.S EL. CN-Impact alue Ferrite N/mm 2 (lbs/in 2 ) (%) 0 (32 ) -20 (-4 ) Quantity (FN) 590 (85,600) (74) 50 (37) 7~10 speed 1.2 (.045) Shielding gas 1.6 (1/16) %r or r+2%o2 143
3 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS SM-308L WS 5.9 / SME SF5.9 ER308L JIS Z3321 Y308L SM-309 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS WS 5.9 / SME SF5.9 ER309 JIS Z3321 Y309 MIG welding of low carbon 18%Cr-8%Ni steel for chemical industries such as oil, medical, fertilizer and textile industries and for nuclear reactors. MIG welding of 22%Cr-12%Ni steel, heat resistant cast steel clad side of 18%Cr-8%Ni clad steel and stainless steel to Cr-Mo steel or carbon steel. Though SM-308L is austenitic type stainless steel wire, the weld metal contains ferrite and resistance to crack is extremely good. The usability, such as arc stability and assimilability of welds to base metal is extremely good. Resistance to corrosion and the mechanical properties of the weld metal are good. s the weld metal contains ferrite, its crack resistibility is good. Due to its high level of alloy, it has excellent resistance to heat. Typical Chemical Composition of ll-weld Metal (%) Typical Chemical Composition of ll-weld Metal (%) T.S EL. Ferrite N/mm 2 (lbs/in 2 ) (%) Quantity (FN) 660 (95,700) ~10.0 T.S EL. CN-Impact alue Ferrite N/mm 2 (lbs/in 2 ) (%) 0 (32 ) -20 (-4 ) Quantity (FN) 560 (81,300) (66) 50 (37) 10~14 Speed 1.2 (.045) Shielding gas 1.6 (1/16) %r or r+2%o2 Speed 1.2 (.045) Shielding gas 1.6 (1/16) %r or r+2%o2 pproval BS
4 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS SM-309L WS 5.9 / SME SF5.9 ER309L JIS Z3321 Y309L SM-310 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS WS 5.9 / SME SF5.9 ER310 JIS Z3321 Y310 MIG welding of 22%Cr-12%Ni steel, heat resistant cast steel clad side of 18%Cr-8%Ni clad steel and stainless steel to Cr-Mo steel or carbon steel. MIG welding of 25%Cr-20%Ni stainless steel, welding on the clad side of stainless clad steel. Welding of dissimilar metals. s the weld metal contains ferrite, its resistance to crack is good. Due to its high level of alloy, it has excellent heat resistance. SM-310 has full austenitic structure. Typical Chemical Composition of ll-weld Metal (%) Typical Chemical Composition of ll-weld Metal (%) T.S EL. Ferrite N/mm 2 (lbs/in 2 ) (%) Quantity (FN) 640 (92,900) ~12.0 T.S EL. N/mm 2 (lbs/in 2 ) (%) 610 (88,500) 40 Speed Speed 1.2 (.045) Shielding gas 1.6 (1/16) %r or r+2%o2 1.2 (.045) Shielding gas 1.6 (1/16) %r or r+2%o
5 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS SM-316 WS 5.9 / SME SF5.9 ER316 JIS Z3321 Y316 SM-316L MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS WS 5.9 / SME SF5.9 ER316L JIS Z3321 Y316L MIG welding of 18%Cr-12%Ni-2%Mo stainless steel for chemical industries and nuclear reactors. MIG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steel for chemical industries and nuclear reactors. Though SM-316 is austenitic type stainless steel wire, the weld metal contains ferrite and resistance to crack is quite good. The usability, such as arc stability and assimilability of welds to base metal is good. Resistance to corrosion and heat is quite good. Though SM-316L is austenitic type stainless steel wire, the weld metal contains ferrite and resistance to crack is quite good. The usability, such as, arc stability and assimilability of welds to base metal is good. Resistance to corrosion and heat is quite good. Typical Chemical Composition of ll-weld Metal (%) Mo Typical Chemical Composition of ll-weld Metal (%) Mo T.S EL. Ferrite N/mm 2 (lbs/in 2 ) (%) Quantity (FN) 580 (84,100) 39 5~8 T.S EL. CN-Impact alue Ferrite N/mm 2 (lbs/in 2 ) (%) 0 (32 ) Quantity (FN) 570 (82,700) (81) 10~13 Speed Speed 1.2 (.045) Shielding gas 1.6 (1/16) %r or r+2%o2 1.2 (.045) Shielding gas 1.6 (1/16) %r or r+2%o2 pproval BS
6 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS ST-308 WS 5.9 / SME SF5.9 ER308 JIS Z3321 Y308 ST-308L MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS WS 5.9 / SME SF5.9 ER308L JIS Z3321 Y308L TIG welding of 18%-8%Ni stainless steel. TIG welding of extra-low carbon 18%Cr-18%Ni and 18%Cr-8%Ni stainless steel. ST-308 is a filler rod for TIG welding with pure r gas. s the weld metal contains ferrite, its crack resistibility is excellent. Both its bead appearance and weldability are good. Furthermore, resistance to corrosion and mechanical properties is good. ST-308L is a filler rod for TIG welding with pure r gas. s the weld metal contains ferrite, its crack resistibility is excellent. Both its bead appearance and weldability are good. The corrosion resistibility and intergranular corrosion, resistibility are extremely excellent. Furthermore, resistance to corrosion and mechanical properties is good. Typical Chemical composition of ll-weld Metal (%) Typical Chemical composition of ll-weld Metal (%) Y.S EL. CN-Impact alue 610 (88,500) (95) Y.S EL. CN-Impact alue 600 (87,000) (81) 1.2 (.045) ShieldingGas 1.6 (1/16) r 1.2 (.045) Shielding Gas 1.6 (1/16) r pproval KR, BS, DN 150 pproval KR, BS, DN, LR, NK, B 151
7 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS ST-309 WS 5.9 / SME SF5.9 ER309 JIS Z3321 Y309 ST-309L MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS WS 5.9 / SME SF5.9 ER309L JIS Z3321 Y309L TIG welding of 22%Cr-12%Ni steel and a variety welding stainless with mild steel. Clad steel side of 18%Cr-8%Ni clad steel. TIG welding of low carbon 22%Cr-12%Ni steel and a dissimilar metals. Clad side of 18%Cr-8%Ni clad steel. ST-309 is a filler rod for TIG welding with pure r gas. s the weld metal contains ferrite, its crack resistibility is excellent. Furthermore, resistance to corrosion and heat is extremely good. ST-309L is a filler rod for TIG welding with pure r gas. s the weld metal contains ferrite, its crack resistibility is excellent. Furthermore, resistance to corrosion and heat is extremely good. Typical Chemical composition of ll-weld Metal (%) Typical Chemical composition of ll-weld Metal (%) Y.S EL. CN-Impact alue Y.S EL. CN-Impact alue 620 (90,000) (96) 600 (87,000) (110) 1.2 (.045) Shielding Gas 1.6 (1/16) r 1.2 (.045) Shielding Gas 1.6 (1/16) r pproval BS 152 pproval BS, DN, LR, NK, B 153
8 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS ST-310 WS 5.9 / SME SF5.9 ER310 JIS Z3321 Y310 ST-316 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS WS 5.9 / SME SF5.9 ER316 JIS Z3321 Y316 TIG welding of 25%Cr-20%Ni steel. TIG welding of low carbon 18%Cr-12%Ni-2%Mo ST-310 is a filler rod for TIG welding with pure r gas. The structure of the weld metal is all austenite. Resistance to corrosion and heat of weld metal is excellent. Elongation of weld metal is extremely good. ST-316 is a filler rod for TIG welding with pure r gas. s the weld metal contains ferrite, its crack resistibility is excellent. Both its bead appearance and weldability are good. Resistance to corrosion and heat is extremely good. Typical Chemical composition of ll-weld Metal (%) Typical Chemical composition of ll-weld Metal (%) Mo Y.S EL. CN-Impact alue 590 (85,600) (95) Y.S EL. CN-Impact alue 610 (88,500) (81) 1.2 (.045) Shielding Gas 1.6 (1/16) r 1.2 (.045) Shielding Gas 1.6 (1/16) r pproval BS
9 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS ST-316L WS 5.9 / SME SF5.9 ER316L JIS Z3321 Y316L ST-50G MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS WS 5.18 / SME SF5.18 ER70S-G JIS Z3316 YGT50 TIG welding of low carbon 18%Cr-12%Ni-2%Mo steel. Butt and fillet welding of carbon steel for pressure vessels, tubes for nuclear reactors, ships, penstock and aluminum-killed steel for low temperature service. ST-316L is a filler rod for TIG welding with pure r gas. s the weld metal contains ferrite, its crack resistibility is excellent. Both its bead appearance and weldability are good. Resistance to corrosion and heat is extremely good. ST-50 G is a wire for TIG welding with pure r gas. ll position welding and steel sheet welding can be performed quite easily. Typical Chemical composition of ll-weld Metal (%) Mo Typical Chemical composition of ll-weld Metal (%) C Si Mn Shielding Gas r Y.S EL. CN-Impact alue 570 (82,700) (103) Y.S T.S EL. CN-Impact alue N/mm 2 (lbs/in 2 ) N/mm 2 (lbs/in 2 ) (%) J (ft.lbs) -20 C (-4 F) 460 (66,700) 530 (76,900) (125) mm (in) ( /min.) 1.2 (.045) Shielding Gas 1.6 (1/16) r mm (in) 1.6 (1/16) 2.0 (5/64) 2.4 (3/32) 2.6 (3/32) 3.2 (1/8) Length mm (in) 900(36) pproval KR, BS, DN, GL, LR, NK, B 156 pproval KR, BS, DN, LR, NK, B, GL 157
10 MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS MIG/TIG RC WELDING FOR STINLESS STEELS & CRBON STEELS ST WS 5.18 / SME SF5.18 ER70S-6 JIS Z3316 YGT50 ST WS 5.18 / SME SF5.18 ER70S-3 Butt and fillet welding of carbon steel for pressure vessels, tubes for nuclear reactors, ships, penstock and aluminum-killed steel for low temperature service. Butt and fillet welding of carbon steel for pressure vessels, tubes for nuclear reactors, ships, penstock and aluminum-killed steel for low temperature service. ST-50 6 is a wire for TIG welding with pure r gas. ll position welding and steel sheet welding can be performed quite easily. ST-50.3 is a wire for TIG welding with pure r gas. ll position welding and steel sheet welding can be performed quite easily. Typical Chemical composition of ll-weld Metal (%) C Si Mn Shielding Gas r Typical Chemical composition of ll-weld Metal (%) C Si Mn Shielding Gas r Y.S T.S EL. CN-Impact alue N/mm 2 (lbs/in 2 ) N/mm 2 (lbs/in 2 ) (%) J (ft.lbs) -20 C (-4 F) 450 (65,300) 520 (75,500) (132) Y.S T.S EL. CN-Impact alue N/mm 2 (lbs/in 2 ) N/mm 2 (lbs/in 2 ) (%) J (ft.lbs) -20 C (-4 F) 495 (71,800) 565 (81,950) (125) mm (in) Length mm (in) 1.6 (1/16) 2.0 (5/64) 2.4 (3/32) 900(36) 2.6 (3/32) 3.2(1/18) mm (in) 1.6 (1/16) 2.0 (5/64) 2.4 (3/32) 2.6 (3/32) 3.2 (1/18) Length mm (in) 900 (36) pproval BS 158 pproval BS 159
Rev. 00 S-7016.H. COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.
Rev. 00 COVERED ARC WELDING ELECTRODE FOR 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD. Specification AWS JIS EN ISO Z3211 A5.1 2560-A E7016 E4916 E42 E4916 E42 3 B 1 2 Applications Structures
More informationEnhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014. Juha Kela / 316plus
Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014 8 July 2014 1 Lower cost 8 July 2014 2 Lower cost 316 plus is available at lower,
More informationDX2202 Duplex stainless steel
Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
More informationINDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
More informationAUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 45 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT 1.0 SCOPE 2 2.0 CONFLICTS
More informationEuropean Welding Standards
European Welding Standards John Dyson 15 th March 2004 European Standards Harmonised Standards Not all EN Standards are Harmonised, only those that are considered to satisfy relevant ESRs in product directives.
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationWelding Alloys Group. TETRA S, TETRA V & TETRA SB Stainless flux cored wires
Welding Alloys Group TETRA S, TETRA V & TETRA SB Stainless flux cored wires Flux cored wires range Welding Alloys Group offer the world s largest range of flux and metal cored welding wires for low, medium,
More informationATI 2205 ATI 2205. Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
More informationALLOY C276 DATA SHEET
ALLOY C276 DATA SHEET //// Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy known for its corrosion resistance in a wide range of aggressive media. It is one of the
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
More informationDrill Pipe Hard-facing
Drill Pipe Hard-facing GLOBAL PROTECTION AGAINST WEAR AND TEAR Oxyacetylene Rods Flux- and Metal Cored Wires Electrodes PTA - Welding Oxyacetylene Welding and Spray Powders Flame Spraying FLSP Arc Spraying
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More informationMATERIAL SPECIFICATIONS CATALOGUE
MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the
More informationChapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
More informationDuplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association
Duplex Stainless Steel Fabrication Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association 1 Promoting molybdenum - as a material with superior properties and performance in a
More informationSubmerged Arc Wires & Fluxes
Submerged Arc Wires & Fluxes Unsurpassed solutions for ambitious tasks www.airliquide.ca www.blueshield.ca 1 of 6 For decades, Air Liquide and Oerlikon have contributed significantly to the development
More informationTHE MISSING ELEMENT IS
THE MISSING ELEMENT IS 119 Le 1895 Lincoln Electric Your single source for alloy consumables. PREMIUM ALLOY WELDING SOLUTIONS Lincoln Electric is your single source for alloy welding consumables. We make
More informationCopper. Consumables. Copper and Copper Alloys. Welding Processes
Consumables and Alloys is a metal with some very important properties, the main ones being its high electrical conductivity, its high thermal conductivity, its excellent resistance to corrosion, and its
More informationRely on Our Material Competence for Your Demanding Industrial Processes
Cast Materials Rely on Our Material Competence for Your Demanding Industrial Processes Our customer-focused R&D and continuous research on new material options enable us to develop equipment with a strong
More informationWear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech
Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat
More informationWORD DEFINITION WORD (NATIONAL LANGUAGE)
WELDING GLOSSARY The Glossary has been created as part of the Migration for Development in the Western Balkans (MIDWEB) project, which received financial assistance from the European Commission IPA 2009
More informationNorth American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
More information3rd Special Edition TODAY KOBEL K CO WELDING CONSUMABLES OBEL FOR ST AINLESS STEEL ST
3rd Special Edition TODAY KOBELCO WELDING CONSUMABLES FOR STAINLESS STEEL A Quick Guide to Suitable Welding Consumables for Stainless Steel Steel type Key notes for application SMAW FCAW Brand name(1)
More informationCOMPAX SUPREME Mold Quality Tool Steel
T OOL STEEL FACTS COMPAX Mold Quality Tool Steel Great Tooling Starts Here! 2 This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationNIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE
Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_01_201211f
More informationDuplex stainless steels
Duple stainless steels 2202 2507 2304 2205 by ArcelorMittal ArcelorMittal, your key partner ArcelorMittal is the world leader in the steel industry. Through many of its units, it offers a multitude of
More informationASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
More informationStandard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1
Designation: A 213/A 213M 03b Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 This standard is issued
More informationDIN 2391-81 Part II SEAMLESS PRECISION STEEL TUBES
DIN 91-81 Part II SEAMLESS PREISION STEEL TUBES 1.Field of application This defines the technical delivery conditions for seamless precision steel tubes according to DIN 91 Part 1 which are made from the
More informationA Beginner s Guide to MIG Welding
A Beginner s Guide to MIG Welding MIG Welding Names MIG welding, or MIG, is an acronym for Metal Inert Gas welding. MIG is a commonly used and accepted slang term that was appropriate when the process
More informationLocalised corrosion of stainless steels depending on chlorine dosage in chlorinated water
acom 3-211 A corrosion management and applications engineering magazine from Outokumpu Localised corrosion of stainless steels depending on chlorine dosage in chlorinated water Introduction The European
More informationEML 2322L MAE Design and Manufacturing Laboratory. Welding
EML 2322L MAE Design and Manufacturing Laboratory Welding Intro to Welding A weld is made when separate pieces of material to be joined combine and form one piece when heated to a temperature high enough
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic
More informationX15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.
TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT
More informationAbout Sintered Products. Products for: - Resistance Welding Electrodes - Electrical Contact Materials. Product Definition & Uses.
AMPCO Sintered Alloys Products for: - Resistance Welding Electrodes - Electrical Contact Materials Product Definition & Uses The high electrical and thermal conductivity of copper is combined with arc-resistant
More informationA Beginner s Guide to TIG Welding
A Beginner s Guide to TIG Welding TIG Welding Names TIG Welding, or TIG, is an acronym for Tungsten Inert Gas welding. TIG is a commonly used and accepted slag term. The proper terminology is Gas Tungsten
More informationWelding. ArcelorMittal Europe Flat Products. Definitions of welding and weldability. Consequences of welding
ArcelorMittal Europe Flat Products Welding Definitions of welding and weldability Welding of metal parts is a joining process designed to ensure metallic continuity across the joint. This continuity is
More informationUrea and Nitric Acid Plants: Improvement of Shut-Down, Revamping, Debottlenecking and Refurbishment
pp Urea and Nitric Acid Plants: Improvement of Shut-Down, Revamping, Debottlenecking and Refurbishment J. M. SLUYTERS GEMACO SA Herstal, Belgium A presentation on special corrosion-resistant steels for
More informationwww.askaynak.com.tr MIG Wires and TIG Rods for Welding of Stainless Steels MIG Wires and TIG Rods for Welding of Aluminium Alloys
Eczacýbaþý Lincoln Electric STARWELD Products MIG Wires and TIG Rods for Welding of Stainless Steels MIG Wires and TIG Rods for Welding of Aluminium Alloys Flux and Metal Cored Wires for Welding of UnAlloy
More informationALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST
SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,
More informationDurcomet 100 CD4MCuN. Bulletin A/7l
Durcomet 100 CD4MCuN Bulletin A/7l Durcomet 100 Introduction Durcomet 100 is a duplex stainless steel produced to ASTM specification A995 or A890, Grade CD4MCuN (1B). It is indicated by the Flowserve casting
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 304 UNS S30400 EN 1.4301 AISI 304L UNS S30430 EN 1.4307 INTRODUCTION: Types 304 and 304L are the most versatile and widely used of
More informationWelding. Module 19.2.1
Welding Module 19.2.1 Hard Soldering Hard soldering is a general term for silver soldering and brazing. These are very similar thermal joining processes to soft soldering in as much that the parent metal
More informationwww.ruukki.com WELDING. GENERAL HOT-ROLLED STEEL SHEETS, PLATES AND COILS
www.ruukki.com WELDING. GENERAL HOT-ROLLED STEEL SHEETS, PLATES AND COILS Selecting the welding process The choice of the welding process must include the consideration of any steel-specific limitations
More informationMartensite transformation, microsegregation, and creep strength of. 9 Cr-1 Mo-V steel weld metal
Martensite transformation, microsegregation, and creep strength of 9 Cr-1 Mo-V steel weld metal M. L. Santella¹, R. W. Swindeman¹, R. W. Reed¹, and J. M. Tanzosh² ¹ Oak Ridge National Laboratory, Oak Ridge,
More informationPRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
More informationJIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
More informationComparison of Mechanical Properties on 15CDV6 Steel Plates by TIG- Welding with and without copper coated filler wires
Comparison of Mechanical Properties on 15CDV6 Steel Plates by TIG- Welding with and without copper coated filler wires S Sapthagiri 1, K Jayathirtha Rao 2, K Ashok Reddy 3 and C Sharada Prabhakar 4 1,
More informationCopper Alloys COPPER ALLOYS. Weld Tech News VOL 1. NO. 8
Copper Alloys Weld Tech News VOL 1. NO. 8 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
More informationTIG WELDING TIPS by Tom Bell
(This is a two-part document, with general tig welding first followed by one aluminum-specific.) TIG WELDING TIPS by Tom Bell 1. The bigger the rod, the easier it is to feed. Use larger diameter rods (3/32
More informationRAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
More informationS355 European Standard Steel
1(7) S European Standard Steel S EN 10025 : 2004 Standard Plate S structural steel plate is a highstrength lowalloy European standard structural steel covering four of the six "Parts" within the EN 10025
More informationSMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
More informationHow To Write A Recipe Card
Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN 2157-2. 51 Macrostructure
More informationPRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
More informationThermische Speicherung von Solarenergie
Thermische Speicherung von Solarenergie Dr. Thomas Bauer Institut für Technische Thermodynamik Stuttgart, Köln 15. Kölner Sonnenkolloquium, 12.6.2012 www.dlr.de/tt Slide 2 > 15. Kölner Sonnenkolloquium
More informationSandvik SAF 2707 HD (UNS S32707) a hyper-duplex stainless steel for severe chloride containing environments
(UNS S32707) a hyper-duplex stainless steel for severe chloride containing environments lec ture no. s -51-63. 11/ 20 06 sandvik r ese arch and de velopment centr e Kenneth Göransson, Marie-Louise Nyman,
More informationWELDING & CUTTING MAIN EQUIPMENT
GASES DIVISION GAS WELDING & CUTTING EQUIPMENT WELDING & CUTTING MAIN EQUIPMENT GAS WELDING & CUTTING KIT The MARIGASES GAS WELDING AND CUTTING KIT is a high quality set containing all the tools and components
More informationProblems in Welding of High Strength Aluminium Alloys
Singapore Welding Society Newsletter, September 1999 Problems in Welding of High Strength Aluminium Alloys Wei Zhou Nanyang Technological University, Singapore E-mail: WZhou@Cantab.Net Pure aluminium has
More informationQSTE... hot-rolled high strength cold forming sheet steel as per EN 10 149
QSTE... hot-rolled high strength cold forming sheet steel as per QStE hot-rolled high strength cold forming sheet steel Steels labelled QStE are a class of fine grain micro-alloyed thermo-mechanically
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 304 (S30400)/ EN 1.4301 304L (S30403) / EN 1.4307 304H (S30409) Introduction: Types 304, 304L and 304H are the most versatile and widely
More informationSS-EN ISO 9001 SS-EN ISO 14001
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties
More informationEN 13445-4:2002 (E) Issue 1 (2002-05)
Issue 1 (2002-05) 8.4.4 Impact test...26 8.4.5 Bend test...26 8.4.6 Macro examination...27 8.4.7 Micro examination...27 8.4.8 Hardness test...27 8.4.9 Retests...27 8.4.10 Test report...28 9 Forming of
More informationDuplex Stainless Steel
Duplex Stainless Steel Outokumpu EN ASTM LDX 2101 1.4162 S32101 Outokumpu 2304 1.4362 S32304 2205 Code Plus Two 1.4462 S32205 S31803 Outokumpu 2507 1.4410 S32750 Characteristic properties High strength
More informationSeamless stainless tubes for hydraulic and instrumentation systems
Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes
More informationDuplex Stainless Steels
Duplex Stainless Steels Contents Answers for today s challenges...4 The expert s voice...5 Product positioning...6 Product suitability...8 Chemical composition...9 Mechanical properties...10 Physical properties...13
More informationGas tungsten arc welding, commonly called TIG (tungsten inert gas), produces an arc between a
DESIGN CONSIDERATIONS FOR WELDING Apart from resistance spot welding (RSW), three processes are most commonly used for welding metal stampings and fabrications: gas metal arc welding (GMAW) or MIG; gas
More informationGeneral characteristics of stainless steels Basic requirements and behaviour of Stainless electrode coatings Cromarod Stainless product programme
General characteristics of stainless steels Basic requirements and behaviour of Stainless electrode coatings Cromarod Stainless product programme General characteristics of stainless steels Stainless steel
More informationSupercored 70NS TYPE : Metal-Cored
09000002 MIG FCW Supercored 70NS 1,2mm Hyundai 09000003 MIG FCW Supercored 70NS 1,4mm Hyundai 현대핸드북(영문)_5-수정 2013.7.24 12:51 PM 페이지205 백제2번 2540DPI 200LPI 09000024 MIG FCW Supercored 70NS 1,6mm Hyundai
More informationSandvik duplex stainless steels
duplex stainless steels Superior performance. Better value. Greater reliability. 2 Take the lead Superior performance. Better value. Greater reliability. When you compare s duplex stainless steels with
More informationDIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES
DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES For connection with the International Draft Standards 3183 and 3845 published by the International Organization
More informationBUMAX. REYHER your partner for the BUMAX range
BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX
More informationCr-Mo Welding Electrodes for the Power Generating Industry
YOUR CHOICE FOR CREEP RESISTANT FILLER METALS Cr-Mo Welding Electrodes for the Power Generating Industry ESAB Welding & Cutting Products WELDING l CUTTING l FILLER Table of contents Power generation FOR
More informationStandards and projects under the direct responsibility of TC 44 Secretariat
Standards and projects under the direct responsibility of TC 44 Secretariat ISO 3677:1992 Filler metal for soft soldering, brazing and braze welding -- Designation ISO 5187:1985 Welding and allied processes
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 825 DATA SHEET //// Alloy 825 (UNS designation N08825) is a nickel-chromium alloy with additions of molybdenum and copper. It has excellent resistance to both reducing and oxidizing acids, to stress
More informationAluminized Steel Type 1 STAINLESS 409 and 439
P R O D U C T D A T A B U L L E T I N Aluminized Steel Type 1 STAINLESS and Excellent Resistance to Pitting Corrosion from Road Salt Excellent Resistance to Muffler Condensate Corrosion Red Rust Protection
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More information