LED LIGHTING CATALOG 2014 vol.1. Dimmer Power Supplies

Transcription

1 LIGHTING CATALOG 2014 vol.1 Dimmer

2 Dimmer DMX EUCHIPS DMX Driver 5A 3ch For RGB Meets DMX512/ channels output, MAX5A per 1channel. To sert DMX adress by DIP switch. DMX signal In/Out is Output channel Output power EUCHIPS DMX Driver 5A 3ch PX24500 DC6 25V 3ch MAX5A per 1channel <180W, <360W (mm) 242.5g 0 70 DMX Driver 6A 1ch For Single color Meets DMX512/1990 and 010V analog signal Dimmer 1 channels output, MAX6A per 1channel. To set DMX adress by DIP switch. DMX signal In/Out is DMX Decoder&Driver MODEL: PX24500 V R G B V V At least C Output channel Output power DMX Driver 6A 1ch PX24600 DC12 24V 1ch MAX 6A per 1channel <144W (mm) 221.5g 0 70 DMX Decoder MODEL: PX24600 OUTPUT V V V V V V At least 0.5 /2C 010V Analog Signal At least 0.75 /2C EUCHIPS full color controller Wireless remote controller 256 levels of grey, totally million colors, really full color Various modes with Pause function Eight different speed level Automatic parameter memory Various output interface, XLR3 Male & Female, Output chanel Output power full color controller DMX100 12VDC 1 port (mm) 0.6 KG AC Adapter PX24500 DMX OUT Male XLR3 Female 138

3 Luci Input&output chanel Output power DMX Driver Box 5 Port 300W / 24V To DMX regenerator To next DMX driver box PX24500 Connectable up to 4.0A LFQ201000MCL LFQ301000MCL PX24600 Connectable up to 4.8A DMX Driver Box 5 Port 300W LSC AC100V220V 15ch MAX 1A per 1channel 300W g 0 70 LSC00512(24)300 LSC00512(24)300 5 ports Example: for Luci FLEX 3in1 multi Connection of up to 5 devices (5m) per port is possible. Connection of up to 23 devices per driver box is possible. Make the total wiring distance of the data cable which is connected from the DMX regenerator to the DMX driver box within 100m. DMX Driver Box 5 Port 300W LSC AC100V220V 15ch MAX 1A per 1channel 300W g 0 70 *When 100m is exceeded, extension is possible by using a signal amplifier (sold separately). Please consult us for details. Rating connectable up to (m) W(VA) LFT CL 6W LFT CL 6W LFX CL LFX CL LFP15900 CL LFP CL LFP50900 CL LCL1000 DFI For RGB Meets DMX512. included swirching 3channel 5port (15 channels output),max3a per 1channel. To sert DMX adress by switch. DMX signal In/Out is terminal block. These products will be discontinued at the end of March Please contact us for alternatives. Rating 14W/m 14W/m 13.9W/900mm W/900mm 24.8W/m connectable up to (m) W(VA) Power FLEX Flat FLEX FLEX FLEX 3in1 multi silux Slim Light Connected Light Line Graze TANA 240V Line Light Disk MUKU bar Down Light Dimmer 139

4 Dimmer (010V/110V) EUCHIPS Dimmer Driver 010V/110V Analog Signal driver, receive 010V/110V dimsignal. Single channel output, Max10A per channel. 1 Input & output isolated electrically. Connect at 80% load. AC DIM 103WH Input&output channel Output power EUCHIPS Dimmer Driver 010V/110V DIMS1L10V0 DC12 24V 10A/CH 12V<120W, 24V<240W (mm) g Dimmer Controller 010V 010V dimmer 100V 230V, Output voltage DC 010V Accord with national standard 86 panels, the size is mm Use dimmable drive Up to maximum 20m At least 0.5 2C Wire for 010V 010V/110V 1224VDC SIGN SIGN V V DIM CONTROLLER MODEL: DIMS1L10V0 Dimmable By : 110V Passive Signal 010V/110V Active Signal At least 0.75 /2C Output Voltage Dimmer Controll Panel 010V DIM103 AC100~230V Analog Voltage 010V (mm) 167g 010V Dimmer NI LI LO V V AC N AC Lin AC Lout DC010V DC010V AC 220V L AC 220V N 010V/110V Connectable up to 8.0A Rating connectable up to (m) W(VA) LFT CL LFT CL LFX CL LFX CL LFP15900 CL LFP CL LFP50900 CL LCL1000 DFI 13.9W/900mm W/900mm 24.8W/m PWM(LLCPLC) Connectable up to 4.0A Rating connectable up to (m) W(VA) LFT CL LFT CL LFX CL LFX CL LFP15900 CL LFP CL LFP50900 CL LCL1000 DFI 13.9W/900mm W/900mm 24.8W/m

5 Dimmer (PWM) Luci Input current Output current Luci PWM Light Controller Operating environment humidity Dimmer Driver Product name Rating size note Luci PWM Dimmer Driver 5ALP1 Used together with a controller. Luci PWM Dimmer Driver 5ALP2 Used together with a controller. Luci exclusive PWM Light Controller s up to 5 A can be connected using only this controller and a power unit With the further addition of a dimming driver, a flexible design that covers small to large scales is possible Simple system and basic product appearance are suitable for any scene Wide dimming range and smoothness (1024 gradation) you expect from genuine products Push switch makes it possible to turn the lighting on and off while maintaining the dimming level Compatible with dimming types LP1 and LP2. Even Disk and similar products can be dimmed! Luci PWM Light Controller LLCPLC DC12 24V Max. 5A Max. 5A 120 (H) x 70 (W) x 40 (D) 142g 0 40 C 0 90% (no condensation) LLCPWM5ALP1 LLCPWM5ALP2 Matching with Luci PWM light controller DC12 24V Appliance dimming types that use analog dimming Luci lighting appliances have two types of dimming.use the dimming driver that is appropriate for the type. Example : Dimming Flat FLEX (dimming type LP1) Luci PWM Light Controller Luci PWM Dimmer Driver 5ALP1 Power supply Example : Dimming Line Graze Indoor (dimming type LP2) Luci PWM Light Controller Luci PWM Dimmer Driver 5ALP2 Power supply Distributor Proteras Co., Ltd. Luci Pte. Ltd. Dimming type Products Power supply Luci PWM Light Controller LLCPLC Dimming type LP1 This type directly receives adjusted DC on 2conductor wire. Use the LP1 or similar dimming driver. DC 12V products Flat FLEX FLEX DC 12V dedicated DC 24V products silux Power FLEX Connect Power FLEX Connected Light PWM Light Controller (rear view) DC 24V dedicated W130 H57 D27 W130 H57 D27 Slim Light Indoor Slim Light Oudoor Line Light MUKU bar Supports dimming type LP1 lighting appliances Supports dimming type LP2 lighting appliances Dimming type LP2 This type receives a separate signal on 3 or 4conductor wire (DC,, PWM, ). Use the LP2 dimming driver. (On 3conductor wire, is common.) DC 24V products Line Graze Indoor Line Graze Outdoor Disk DC 24V dedicated Please note that a sound may be produced when the Luci PWM light controller is used in combination with some power supplies. For details on dimmer installation and usage methods, see the manual. When a DC is connected to the dimmer, do not perform wiring work or replace lamp fittings on the secondary side with the power on. A sound may be produced if the load capacity is large with respect to the DC power capacity. When the dimming level is low, flickering may occur. If a separate switch is added, phenomena such as all lights briefly turning on at startup may occur. In addition, the reset state may be the state before the power was turned off. DIP A DIP B ~24V ~24V Conditions to be acknowledged. The following conditions are normal for the product. Flickering: Depending on compatibility with the dimmer, flickering may occur when the dimmer begins or ends fading. Noise: Noise may be emitted from the DC power coil, during dimmer use. Noise may be emitted from the main body of the light appliance, when controlling the Connected Light. Inability to turn off the light: Due to the time lag of the light control signals, the light may be momentarily 100% lit when the switch is OFF. *Use with DIP switch B on light controller unit set to standalone mode A Dedicated DC12~24V To at end of A lighting appliance Dimming type LP1 (FLEX, etc.) Maximum wiring distance from A to A is 10 m Power FLEX Flat FLEX FLEX FLEX 3in1 multi silux Slim Light Connected Light Line Graze TANA 240V Line Light Disk MUKU bar Down Light Dimmer 141

6 Indoors Model Product name Rating size note 35W Single Output NES3512 NES3524 AC85V264V 3A 1.5A W99 H36 D97 MEAN WELL I/O terminal block Protections:Short circuit/ CCC Model 100W Single Output NES10012 NES10024 AC85V264V 8.5A 4.5A W159 H38 D97 MEAN WELL I/O terminal block Protections:Short circuit/ 150W Single Output NES15012 NES15024 AC85V264V 12.5A 6.5A W199 H38 D98 MEAN WELL I/O terminal block Protections:Short circuit/ 35W Single Output RS3512 RS3524 AC88V264V 3A 1.5A W99 H36 D82 MEAN WELL I/O terminal block Protections:Short circuit/ CE Model 100W Single Output 150W Single Output RS10012 RS10024 RS15012 RS15024 AC88V264V AC88V264V 8.5A 4.5A 12.5A 6.5A W159 H38 D97 W199 H38 D98 MEAN WELL I/O terminal block Protections:Short circuit/ MEAN WELL I/O terminal block Protections:Short circuit/ 150W Single Output PBA150F12 PBA150F24 AC85V264V 13A 6.5A W37.5 H93 D181.5 COSEL I/O terminal block Overcurrent & overvoltage protection circuits builtin About handling the products Cable connection method Ex: 150W Single Output DC DC FG AC(L) AC(N) When wiring, make your selection by paying careful attention to the cable used at the input and output. When current flows in a long cable, the loss (heat generation) is generated by resistance, etc. When the cable is bundled, heat dissipation becomes poor and the temperature becomes extremely high.when bundling 5 cables or more, connect by lowering the load factor (number of connected devices). Polarity Polarity DC output side (Connects to lamp fitting) Ground AC input side (Connects to primary side ) Power supply selection method Pay attention to the electrical capacity of the load (lamp) connected to the. For 15 to 150W, consumption of 70% of a full power or less by the load is typically assumed. Example: When you want to use 5 pieces of Luci Power FLEX 20mm pitch Luci Power FLEX 20mm pitch 10.5W x 10pc = 105W 105W 70% (load factor) = Approx. 150W Select a 150W. Small noise may be emitted from the appliance and the dimmer while using the dimmer, but it is normal. Load capacity of 60% is recommended to reduce noise. 142

7 Dimmer Power FLEX Flat FLEX FLEX FLEX 3in1 multi silux Slim Light Connected Light Line Graze TANA 240V Line Light Disk MUKU bar Down Light 143

8 Configuration For singlecolor, 010V Signal Dimmed manually by DIM103WH, Dimmed with Control System. AC DIM 103WH (or 010V/110V analog dimming signal module) At least 0.5 2C Wire for 010V Within 20m 010V/110V SIGN SIGN V V DIM CONTROLLER MODEL : DIMS1L10V0 Dimmable By : 110V Passive Signal 010V/110V Active Signal 1224VDC For singlecolor, DMX control system Can be used to provide performances with motion Long signal transmission distance (In the case of DMX) Can also receive 010V analog signals Controller and performance programmer Supplied by the customer DMX Controller metal coat wire(stpshirerded Twisted Pair) In the case of DMX DMX Decoder MODEL : PX24600 V V V V V V 010V Analog Signal Within 100m DMX Decoder MODEL : PX24600 V V V V V V 010V Analog Signal Up to a maximum of 20 units connected in series. *A separate splitter is required for more than 20 units. 144

9 Dimmer For RGB, DMX Control System Can be used to provide performances with motion Long signal transmission distance Controller and performance programmer Supplied by the customer Within 100m *Within 50m when using DMX100 DMX Controller (or DMX 100) Wire connection details Wire connection detail as reference metal coat wire(stpshirerded Twisted Pair) In the case of DMX DMX Decoder&Driver MODEL: PX24500 DMX Decoder&Driver MODEL: PX24500 V R G B V V Data cable Wire connection LAN GND Up to a maximum of 20 units connected in series. *A separate splitter is required for more than 20 units. Not used Please confirm how to connect each cable to the supplier of DMX controller V R G B V V At least C At least C 1 : DATA 2 : DATA 36 : NC 78 : GND Power FLEX Flat FLEX FLEX FLEX 3in1 multi silux Slim Light Connected Light Line Graze TANA 240V Line Light Disk MUKU bar Down Light 145

10 Configuration Luci PWM Light Controller Using as a standalone light controller (appliance dimming type LP1) *Use with DIP switch B on light controller unit set to standalone mode PWM Light Controller (rear view) DIP A DIP B ~24V ~24V A Dedicated DC12~24V To at end of A lighting appliance Dimming type LP1 (FLEX, etc.) Maximum wiring distance from A to A is 10 m Using with a driver connected, dimming type LP1 *Use with DIP switch B on light controller unit set to master mode.1 PWM Light Controller (rear view) DIP A DIP B Dedicated DC12~24V Dedicated DC12~24V PWM ~24V B ~24V PWM To next driver Maximum of 20 units can be connected Power input PWM input Power input PWM input A To driver at end of A Dedicated 30W PWM Dimming Driver 5A LP1 Output PWM Monitor Output PWM Dimming Driver 5A LP1 Output PWM Monitor Output ~24V ~24V lighting appliance Dimming type LP1 (FLEX, etc.) To at end of B lighting appliance Dimming type LP1 (FLEX, etc.) Maximum wiring distance from A to A is 30 m Maximum wiring distance from B to B is 10 m 146

11 Using with a driver connected, dimming type LP2 *To use with lighting appliances that are dimming type LP2, the PWM Dimming Driver 5ALP2 is required (using only the PWM Light Controller is not possible). Example of connection to Luci Disk (dimming type LP2) PWM Light Controller (rear view) Dedicated DIP A DIP B Dedicated Dedicated PWM To PWM Light Controller PWM To driver at end of A To the next driver Max. 20 units can be connected A PWM Dimming Driver 5A LP2 Dedicated 30W This may need to be changed, depending on the lamp fitting type. The factory setting is Normal. Total maximum wiring distance between the dedicated power supply and the constant current driver is 1 m. Invert Normal To next driver When using a Disk, set to Normal. *To expand the system, wire in parallel branches as shown at left. Dedicated PWM IN PWM OUT PWM Dimming Driver 5A LP2 Power input PWM input Output PWM Monitor Invert Normal Invert Normal This may need to be changed, depending on the lamp fitting type. The factory setting is Nomal. Luci Disk Luci Disk Luci Disk DC/DC constant current driver Power input PWM input Power input PWM input PWM Dimming Driver 5A LP2 White Red Blk *Dimming type LP2 is can only be used with 24 V. *Use with DIP switch B on the light controller set to master mode. Output PWM Monitor PWM Dimming Driver 5A LP2 Output PWM Monitor _PWM _PWM _PWM Luci Disk DC/DC constant current driver LDD700HWBK / LDD1000HWBK lighting appliance Dimming type LP2 (Type for Line Graze dimming, etc.) To at end of B lighting appliance Dimming type LP2 (Type for Line Graze dimming, etc.) To at end of B Maximum wiring distance from A to A is 30 m Maximum wiring distance from B to B is 10 m Yellow Blue Up to 5 units can be connected Luci Disk Maximum wiring distance between the constant current driver and the end lamp fitting is 30 m. Power FLEX Flat FLEX FLEX FLEX 3in1 multi silux Slim Light Connected Light Line Graze TANA 240V Line Light Disk MUKU bar Down Light Dimmer 147