Air Flow Solutions. Ventilation with Heat Recovery Residential application

Transcription

1 ir Flow Solutions Ventilation with Heat Recovery Residential application

2 Ventilation with Heat Recovery Residential The indoor climate is of the utmost importance as most of us spend the greater part of our lives indoors. To ensure comfort and a sense of well-being, the air we breathe should be clean, and also be at the right temperature and humidity level. Whatever the situation, uplexvent Mechanical Ventilation with Heat Recovery solutions can play a significant role as they help create a healthier living environment whilst saving valuable energy. uplexvent asic Line range of compact, entry level mechanical ventilation units with heat recovery designed for social housing, private sector apartment blocks and terraced houses. The units provide high efficiency, low power consumption and low noise balanced ventilation solutions which help meet current uilding Regulations. uplexvent Professional Line range of Passive House Institute certified heat recovery units designed for private and social family houses which combine high performance with premium quality. vailable with unique triple filter and digital control, these units ensure air comfort with advanced control functions such as automatic summer bypass and the heater assisted smart frost protection. uplexvent Interactive Line range of internet enabled, mechanical ventilation units with heat recovery for remote monitoring and control in residential applications. They are designed for comfortable and healthy ventilation in both private and social dwellings such as low energy and passive family houses, flats and high rise apartments. ustomer Services airflow.com

3 uplexvent UNO V Single Room Unit Up to 5 m /hr air volume Key Features Intake air Exhaust air For use in single rooms up to 6 m² * Fully balanced ventilation with simultaneous supply and extract air Easy to install through the wall (no central ducting) Extract filter Supply filter alanced Ventilation Over 9% thermal efficiency Silent operation -8 d() uilt-in electric post-heater Extract air Heat exchanger Supply air utomatic frost protection Technical ata ontrols Three speed digital / wireless control uplexvent UNO V The uplexvent UNO V is a single room heat recovery unit designed to provide balanced ventilation for social and commercial premises plus residential properties. It is ideal for retro-fitting into existing buildings as the unit can be installed easily through the wall that does not involve any central ducting saving on installation time and system cost. Unlike all the other single room heat recovery units on the market, the uplexvent UNO V is equipped with two fans and a plastic counter-flow heat exchanger which deliver balanced supply and extract air ventilation at all times with a heat recovery efficiency exceeding 9%. oost with timer function uilt in G filters with maintenance indicator year warranty + The unit has a metal polymer coated casing finished in a mirror polished stainless steel. The mm synthetic rubber insulation provides sound insulation and avoids thermal bridging. The automatic frost protection prevents condensate freezing in cold periods whereas two G filters clean the indoor air and protect the internal components of the unit. In addition, the built-in post-heater warms the supply air to a comfortable level if needed. Having the low energy E fans the unit consumes as little as 9 watts and comply with the ErP 5 standards. Specification uplexvent UNO V Max. ir Flow m /hr / Pa 5 / Thermal efficiency Over 9% Heat exchanger ounterflow (Plastic) Fans E Frost protection Reducing supply air ontrols -Speed (digital/wireless) Mounting Wall Sound m (d()) - 8 uct diameter (mm) x 5 Electrical supply v / ph / 5Hz Max. power consumption w Filter class x G Electric post-heater 5w Protection class IP asing insulation (mm) Weight (kg) imensions (L x x H) mm 5 x x 58 Part No. 9 The uplexvent UNO V is equipped with a digital display which is located on the front cover plus a wireless controller allowing adjustments from anywhere within the room. Speeds, and produce an air capacity of 6, 5 and 5 m³/hr respectively. dditional functions on the control panel include: Extra heating of supply air Separate fan control oost activation timer adjustable between and 6 minutes Weekly ventilation programming Filter replacement and condensation drain pan level indicator igital controller Wireless controller * Guidance only. ependant upon system pressure. imensions Quick Installation E + excludes motors. Motor warranty one year from date of purchase. Model E UNO V ø5 airflow.com ustomer Services airflow.com

4 uplexvent V7 asic Line Top Entry - Up to 8 m /hr air volume Key Features SP ppendix Q For use in small and medium sized dwellings up to 5 m * Extracts up to 5 m /hr at Pa Over 9% thermal efficiency Thermal summer by-pass Energy efficient E fans ensure low SFP Fits inside a 6mm kitchen cupboard In-built frost protection eiling suspended version available (V7S) Tested by the RE (uilding Research Establishment) and eligible for the SP ppendix Q V7 SFP Efficiency K+ Wet room.6 W/l/s 9% K+ Wet rooms.68 W/l/s 9% K+ Wet rooms.8 W/l/s 89% K+ Wet rooms.99 W/l/s 88% Technical ata ontrols V7 installed in a kitchen cupboard uplexvent V7 Independantly adjustable fans SP-ppendix Q eligible omplies with uilding Regulations year warranty Specification uplexvent V7 uplexvent V7S Max. air flow m /hr / Pa 8 / 78 8 / 78 ir flow m /hr / Pa 5 / 65 5 / 65 Thermal efficiency Over 9% Over 9% Heat exchanger ounterflow (Plastic) ounterflow (Plastic) Fans E E ontrols (normal and boost) -Speed -Speed Mounting Wall eiling Sound m (d()) uct diameter (mm) x 5 x 5 ondensate discharge (mm) x separately mounting commissioning switch is supplied with the unit. Two, % user adjustable speed levels can be set on installation. In addition both fans can be independently adjusted to ensure a balanced system upon commissioning. lso accepts boost function switches (not supplied). n automatic thermal summer by-pass will activate when the supply air temperature reaches 5 to prevent dwelling overheating via heat exchanger. uplexvent V7 is a high performance heat recovery unit which provides a cost-effective solution for residential dwellings. This MVHR unit is equipped with an easily removable polypropylene, ultra-high efficiency heat exchanger which transfers more than 9% of the warmth from the outgoing waste airstream into the incoming fresh air. thermal by-pass helps to avoid dwelling overheating in summer. Thanks to its extremely compact size the uplexvent V7 can be mounted in a standard kitchen cupboard or on the wall vertically which provides a space-saving solution especially for small and medium size dwellings. Our SP ppendix Q eligible V7 and IRFLEX PRO ducting system create a perfect solution with highly efficient heat recovery and Zero Leakage air transfer which provide ventilation levels that meet the latest uilding Regulations (pproved ocument F). Electrical supply v / ph / 5Hz v / ph / 5Hz Max. power consumption 5w 5w Filter class x G x G Thermal by-pass Yes Yes Electric post-heater w (optional) w (optional) Electric frost protection Yes Yes Protection class IPX IPX Weight (kg) imensions (L x H x ) mm 56 x 65 x 6 56 x 65 x 6 Part No imensions Performance Warm ir to Rooms Extract from Wet Rooms Intake from Outside ischarge to tmosphere STTI PRESSURE (Pa) Extract Supply l/sec IR FLOW m /hr ondensation rain * Guidance only. ependant upon system pressure. ccessories Model = EPTH V See switches/accessories for more details. 6 airflow.com ustomer Services airflow.com

5 uplexvent V asic Line Top Entry - Up to 75 m /hr air volume Key Features SP ppendix Q For use in medium and large sized dwellings up to m * ir volume up to 5 m Pa Low energy E fans with.5 W/l/s SFP Over 9% thermal efficiency utomatic summer bypass and frost protection Filter monitoring via pressure sensors Easy installation via interchangeable spigots Tested by the RE (uilding Research Establishment) and eligible for the SP ppendix Q V SFP Efficiency K+ Wet room.9 W/l/s 9% K+ Wet rooms.5 W/l/s 9% K+ Wet rooms.8 W/l/s 9% K+ Wet rooms.5 W/l/s 9% K+5 Wet rooms.59 W/l/s 9% K+6 Wet rooms.69 W/l/s 9% K+7 Wet rooms.8 W/l/s 9% Easy maintenance through the filter access door uplexvent V uplexvent V is one of the latest additions to irflow s uplexvent asic Line which provide balanced ventilation with high efficiency heat recovery, low power consumption and quiet operation to modern residential dwellings. Tamperproof operation for extra safety ata logging capability SP ppendix Q eligible omplies with uilding Regulations year warranty + Equipped with the new generation Radical Range fans, the unit achieves very low SFP levels thus providing house builders and developers with reduction in welling Emission Rates (ER). Technical ata Specification uplexvent V Max. air flow m /hr / Pa 75 / ir flow m /hr / Pa 5 / 8 Thermal efficiency Over 9% Heat exchanger ounterflow (Plastic) Fans E Summer bypass damper utomatic Frost protection Reducing supply air ontrols -Speed + oost Mounting Floor / Wall Sound m (d()) - uct diameter (mm) x 6 ondensate discharge mm Electrical supply v / ph / 5Hz Max. power consumption 8w Filter class x G (F7 optional) Sound urve Sound Pressure Level (d: Overall Scale) d() 6 5 NR5 NR NR NR NR NR entral Frequency (ycle per Second) oost High Speed Medium Speed Low Speed Hz esigned for price-sensitive large-scale projects to help meet current uilding Regulations this MVHR unit also complies with the Energy Saving Trust est Practice. Electric frost heater w (optional) Electric post-heater w (optional) Protection class IP Weight (kg) imensions (L x H x ) mm 7 x 75 x 6 Part No. 9 imensions Performance Front View F M N G Top View Rear H I J K L STTI PRESSURE (Pa) 5 oost High Speed Medium Speed Low Speed E + excludes motors. Motor warranty one year from date of purchase. Front Model E F G H I J K L M N V l/sec m /hr IR FLOW * Guidance only. ependant upon system pressure. ccessories See switches/accessories for more details. 8 airflow.com ustomer Services airflow.com

6 uplexvent V asic Line Top Entry - Up to 75 m /hr air volume Versatile Unit onfiguration V Simple vs igital ontrol Spigot Relocation The unit is supplied as a right handed version as standard. Thanks to the universal condensate drain the unit can easily be changed to the left hand configuration by swapping the front and rear covers. Functions Three speed control (Low - Medium - High) utomatic bypass The uplexvent V has a number of options regarding the position of the four entry/exit spigots. This enables more flexibility when positioning the heat recovery unit and ducting. It is possible to configure the unit for bottom entry connection should space consideration for connecting duct runs necessitate it. E Exhaust air to atmosphere S Supply air to dwelling Removing the front and rear covers S R E O oost with timer Frost protection Frost heater control Spigot O Outdoor air from atmosphere R Return air from dwelling Post-heater control Sealing ap uplexvent V (right handed - standard delivery) uplexvent V (left handed) Indoor temp setting via extract / supply / room temp Separate fan control lanking ap uplexvent V spigot relocation Simple ontrol igital ontrol Weekly ventilation programming Filter Maintenance Indication Simple control incorporates the following features: speed control, low and high speeds are % adjustable via potentiometers, medium speed is calculated automatically. oost function increases air flow when needed. Manual boost with run-on timer / automatic boost with delay timer. hildproof protection locks / unlocks the buttons providing extra safety. Filter maintenance reminder via counter clock (standard) / via pressure sensor (optional). Heater control for frost heater and post-heater. onnection to MS via Modbus RTU (RS85). dvanced digital control also provides: Optional separate fan control for ease of commissioning. Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days. ata logging capability keeps record of unit's operation. Optional humidity or air quaility sensors enable automatic boost control. Indoor temperature control based on room, extract or supply air temperature. ata logging Filter maintenance indicator via counter clock Filter maintenance indicator via pressure sensor emand control via humidity/o /PIR sensors Emergency shut-off (in case of fire etc.) Self diagnostic MS connection (MOUS RS85) On the standard V a counter clock is available to alert the user for maintenance at the pre-set time period. lternatively, an additional pressure sensor is used to monitor the real-time filter status. This provides more accurate and cost-efficient maintenance. Self iagnostic. On-demand control via humidity and PIR sensors. uilt-in humidity/air quality sensor Set temperature adjustments Set timer adjustments onstant flow function Filter pressure sensor connected at the bottom of the unit airflow.com ustomer Services airflow.com

7 uplexvent V5// asic Line Side Entry - Up to 5 m /hr air volume Key Features % utomatic ypass Exhaust ir Outdoor ir uplexvent V5// The uplexvent asic Line V5, V and V are highly efficient, side entry mechanical supply and extract ventilation units with heat recovery for an air capacity of up to 5 m /hr. The unit casing is made of high density EPP material which provides significant insulation, eliminates any thermal bridging. For use in small, medium and large sized dwellings up to m * models (side entry) up to m /hr at Pa ompact size (8mm height) provides space saving solutions Over 9% thermal efficiency and low noise utomatic, % summer bypass an be installed on the wall, under the ceiling or on the floor Light weight enables one man installation Simple manual switch as standard. Optional touch screen panel with advanced controls ompliant to ErP 5 standards omplies with uilding Regulations year warranty + The units include an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air where its thermal efficiency exceeds 9%. t no point do the airstreams mix. Having the latest, low energy E fan technology, the V5, V and V comply with the ErP 5 standards and are tested by TUV laboratories. The units are equipped with an automatic, % bypass which totally isolates the heat exchanger so that no air passes through it. This provides effective cooling in the summer season. Technical ata Speciation uplexvent V5 uplexvent V uplexvent V Max. air flow m³/hr / Pa 8 / 78 / 9 5 / 8 ir flow m³/hr / Pa 5 / 69 / 8 / Thermal efficiency Over 9% Over 9% Over 9% Heat exchanger ounterflow (Plastic) ounterflow (Plastic) ounterflow (Plastic) Fans E E E Summer bypass damper % automatic % automatic % automatic Frost protection Reducing supply air Reducing supply air Reducing supply air ontrols Variable Speed ontroller Touch screen panel (optional) Supply ir to the dwelling Variable Speed ontroller Touch screen panel (optional) Extract ir from the dwelling Variable Speed ontroller Touch screen panel (optional) Mounting Wall / eiling / Floor Wall / eiling / Floor Wall / eiling / Floor Sound m (d()) uct diameter (mm) x 6 x 6 x 6 ondensate discharge mm mm mm Electrical supply v / ph / 5Hz v / ph / 5Hz v / ph / 5Hz Max. power consumption w w w Filter class x G (optional F7) x G (optional F7) x G (optional F7) Electric frost heater w (optional) 7w (optional) 7w (optional) Electric post-heater w (optional) 7w (optional) 7w (optional) Protection class IP IP IP Weight (kg) imensions (L x x H) mm 85 x 8 x x 8 x 8 85 x 8 x 8 Part No imensions Performance K K H K M K 6 5 V V5 8 V K K K J K K K K K K E F K G K STTI PRESSURE (Pa) 6 K K l/sec K K. ondensate drain for wall/floor-standing position K. ondensate drain for under ceiling position K. ondensate drain for floor-standing flat position K. ondensate drain for floor-standing flat position L (only one K outlet is connected according to unit orientation) K + excludes motors. Motor warranty one year from date of purchase. I K Model E F G H I J K L M V V/ M m /hr IR FLOW * Guidance only. ependant upon system pressure. ccessories See switches/accessories for more details IR FLOW airflow.com ustomer Services airflow.com K. ondensate drain for floor-standing position K. ondensate drain for underceiling position K. ondensate drain for floor-standing flat position (only one K outlet is connected according to unit orientation)

8 uplexvent V5// asic Line Side Entry - Up to 5 m /hr air volume Mounting Positions Unique to these side entry units is the ability to install the same unit at: Wall / Floor - standing position eiling - flat position (with inclination for drainage) Floor - flat position (with inclination for drainage) This provides exceptional flexibility in product specification, installation and storage. Internet onnection The uplexvent asic Line side entry units can optionally be equipped with a web server that uses Modbus TP/IP protocol to provide a connection between the ventilation unit and the internet via a standard plug and play ethernet cable. This allows you to monitor and control the unit from a computer, laptop or smart phone via the internet or a local area network. The unit can also be monitored remotely by technical service which saves time and cost on service processes. Simple ontrol Simple control incorporates the following features: Variable speed control % adjustable by the user utomatic boost function increases air flow when needed (via volt-free contact or -V sensor output) utomatic frost protection reduces the supply ventilation rate for a certain period to prevent ice build-up within the heat recovery cell depending on the outside air temperature utomatic summer bypass provides free cooling in the summer season. Its motorised damper is triggered by the temperature sensor automatically Heater control for frost heater and post-heater Touch Screen ontrol dditionally, the digital control provides the following features: Stylish Touch Screen with easy-to-use interface Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days. Party / Holiday mode to set the air volume for specific time period based on occupancy. Filter Maintenance reminder Indoor temperature control and display based on; Extract air temperature Supply air temperature Heaters The new generation PT (Positive Temperature oefficient) electric heater incorporates a power adjustment facility which automatically increases/decreases the power based on the air volume going through the heater hence shortens the heating response. lso the heater has two protection thermostats and a perforated metal filter which can easily be maintained via the inspection door. This significantly increases its life span especially when the heater is installed on the incoming air side for frost protection purposes. lternatively it can be used as post-heater to achieve the required indoor air temperature. Metal Housing To achieve better sound levels the units can optionally be covered with a metal jacket which is made of galvanised metal sheet. This special accessory also protects the unit from external damage and extends the life span of the unit. airflow.com ustomer Services airflow.com

9 I uplexvent V9SK Professional Line Top Entry - Up to m /hr air volume Key Features SP ppendix Q uplexvent V9SK The uplexvent V9SK is a ventilation unit with stateof-the-art technology, designed to provide both essential ventilation and to save you money through its intelligent, cost effective and eco-friendly heat recovery system. The unit is delivered with a stylish cooker hood which incorporates an integral fire damper providing fire safety between the hood and the MVHR unit. The unit can be integrated into a fitted kitchen design. For use in medium sized dwellings up to 6 m * Extract up to 6 m /hr at Pa Galvanised steel, double skin casing ooker-hood provides separate extraction Triple filter design with F7 pollen filter Over 9% thermal efficiency and low SFP Manual % summer bypass New smart frost protection uilt-in electric post-heater uto cut-out switch for extra safety SP-ppendix Q eligible omplies with uilding Regulations 5 year warranty + It also includes a grease filter which protects the MVHR unit against particles such as cooking oil extracted through the cooker hood. Unlike all other MVHR units with cooker hood on the market, the V9SK recovers heat even when the separate cooker hood extract is in operation. This important feature prevents cold air draughts especially in winter and keeps your house warm at all times. Tested by the RE (uilding Research Establishment) and eligible for the SP ppendix Q V9 SFP Efficiency K+ Wet room.7 W/l/s 8% K+ Wet rooms.7 W/l/s 8% K+ Wet rooms.8 W/l/s 8% K+ Wet rooms.9 W/l/s 8% K+5 Wet rooms.6 W/l/s 8% Technical ata Specification uplexvent V9SK R uplexvent V9SK L Max. air flow m /hr / Pa / 9 / 9 ir flow m /hr / Pa 6 / 85 6 / 85 Thermal efficiency Over 9% Over 9% Heat exchanger ounterflow (Plastic) ounterflow (Plastic) Fans E E Summer bypass damper % automatic % automatic Frost protection Frost heater Frost heater ontrols -Speed - Manual (on cooker hood) -Speed - Manual (on cooker hood) Mounting Wall Wall Sound m (d()) uct diameter (mm) x 5 x 5 ondensate discharge (mm) Electrical supply v / ph / 5Hz v / ph / 5Hz Max. power consumption 8w 8w Filter class x G / x F7 x G / x F7 Electric frost/post-heater 9w 9w Protection class IP IP asing Insulation (mm) Weight (kg) 5 5 imensions (L x x H) mm 597 x 58 x 798 (incl. cooker hood) 597 x 58 x 798 (incl. cooker hood) Part No imensions Performance FRONT PRT OF UNIT SEEN FROM OVE Right side SEEN FROM EHIN Left side J G O H P Q E F N M L K uct outlets, Model R Inner diameter of female outlet collar ø5mm. Supply air to dwelling. Extract air from dwelling to unit. Outdoor air to unit. Exhaust air out uct outlets, Model L Inner diameter of female outlet collar ø5mm. Supply air to dwelling. Extract air from dwelling to unit. Outdoor air to unit. Exhaust air out STTI PRESSURE (Pa) 5 S E8 S8 S7 E7 5 S6 E6 E5, S5, E,5 S,5 5 E S E S l/sec Extract Supply IR FLOW E m /hr + excludes motors. Motor warranty one year from date of purchase. Model E F G H V9SK I J K L M N O P Q * Guidance only. ependant upon system pressure. ccessories See switches/accessories for more details. v 6 airflow.com ustomer Services airflow.com

10 uplexvent V9SK Professional Line Top Entry - Up to m /hr air volume The unit is made of a galvanised steel double-skin casing which is powder coated both internally and externally to meet hygiene requirements. Moreover, the mm thick insulation in the casing avoids any thermal bridging and significantly reduces noise levels. The V9SK includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air where its thermal efficiency exceeds 9%. t no point do the airstreams mix. The unit includes the brand new smart frost protection facility which significantly reduces the energy consumed to protect the heat exchanger from freezing (see below for more information). Fitted with an additional electric post-heater, the unit keeps the indoor air temperature at the required temperature level at all times hence saving energy especially during the winter period. The V9SK unit is designed with a unique triple filter facility including a F7 pollen filter which provides additional protection against invisible, harmful particles and creates an ultra hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. Having the latest, low energy E fan technology, the V9SK complies with the ErP 5 standards. The unit comes with an outstanding 5 year warranty + and is SP ppendix Q eligible. Triple Filter esign The majority of the MVHR units in the U.K incorporate G or G coarse filters on the extract / supply air side. These filters catch only coarse particles such as insects and leaves to protect the heat exchanger. F7 fine filters on the other hand are highly efficient, catch invisible particles such as pollen, spore, bacterium and dust entering the lungs. uplexvent Professional Line units are the only MVHR units which incorporate triple filter design combining G course filters with the F7 fine filter. This significantly improves the indoor air quality and lowers your maintenance costs. G Filter F7 Filter New Smart Frost Protection % utomatic ypass Exhaust ir Traditional Traditional Frost Frost Protection Protection Logic Logic New New Smart Smart Frost Frost Protection Protection Logic Logic 5 5 Supply Supply ir ir Extract Extract ir ir Supply Supply ir ir Extract Extract ir ir +X +X ca.+ ca.+ +X +X FH FH ca.+ ca.+ ~% ~% % % (efrosting) (efrosting) % % The unit is equipped with an automatic, % bypass which totally isolates the heat exchanger so that no air passes through it. This provides effective cooling in the summer season. ontrols Supply ir to the dwelling Extract ir from the dwelling Outdoor ir ~6% ~6% % % ca. +6 ca. +6 EPH EPH ca. ca. ca. ca. ca. ca. Exhaust Exhaust ir ir ca. ca. Outdoor Outdoor ir ir Exhaust Exhaust ir ir 6 Outdoor ir 6 Outdoor ir Timing Timing and energy and energy consumption consumption graph graph when when Timing Timing and energy and energy consumption consumption graph graph when when frost heater frost heater is used is used electric electric pre-heater pre-heater is usedis used (ca. 5% (ca. less 5% energy less energy consumption) consumption) Time Time Time Time uplexvent Slim-Line ooker Hood olour options of white or grey uplexvent Slim-Line cooker hoods are equipped with a handy sliding glass panel which incorporates a fluorescent lamp. The hoods have detachable grease filters which can be easily maintained. On the traditional frost protection method, the outdoor air is pre-heated before passing through the heat exchanger. This way the unit could still provide balanced ventilation even when the frost protection was on. However, the electric heater kicks in intermittently hence consumes more energy than needed. Supply air fan Exhaust air fan Heat exchanger Electric pre-heater 5 Frost heater 6 Electric bypass damper The new Smart Frost Protection method works in a more energy efficient manner which constantly monitors the heat exchanger conditions and uses the frost heater only when necessary. This significantly reduces the energy consumption and provides more heat recovery throughout the winter season. is adjusted via an integrated four speed switch. Four Speed Switch n alternative to the cooker hood control is the manually operated speed switch which allows simple unit operation when required. Easy to install Manual selection of the fan speed % adjustable speed levels User friendly for quick and simple control. 8 airflow.com ustomer Services airflow.com

11 uplexvent V96SE Professional Line Top Entry - Up to 5 m /hr air volume Key Features SP ppendix Q uplexvent V96SE The uplexvent V96SE is a highly efficient mechanical supply and extract ventilation unit with heat recovery for an air capacity of up to 5 m /hr. It is a wall mounted unit and is delivered complete with a wall mounting plate and condensate drain. The unit is made of a galvanised steel double-skin casing which is powder coated both internally and externally to meet hygiene requirements. For use in medium sized dwellings up to 75 m * Extract up to m /hr at Pa Galvanised steel, double skin casing Triple filter design with F7 pollen filter Over 9% thermal efficiency and low SFP New smart frost protection uilt-in electric post-heater utomatic, % summer bypass uto cut-out switch for extra safety Eight speed digital control with L display and MS (LON / KNX) connection SP ppendix Q eligible and PSSIVE HOUSE Institute certified omplies with uilding Regulations 5 year warranty + Moreover, the mm thick insulation in the casing avoids any thermal bridging and significantly reduces noise levels. The V96SE includes an easily removable, plastic heat 6 exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air where its thermal efficiency up to 9%. t no point do the airstreams mix. 55 Tested by the RE (uilding Research Establishment) and eligible for the SP ppendix Q V96SE SFP Efficiency K+ Wet room.99 W/l/s 87% K+ Wet rooms.9 W/l/s 87% K+ Wet rooms.99 W/l/s 87% K+ Wet rooms. W/l/s 86% K+5 Wet rooms.6 W/l/s 86% Technical ata Specification uplexvent V96SE R uplexvent V96SE L ir flow m³/hr / Pa / 9 / 9 Thermal efficiency Up to 9% Up to 9% Heat exchanger ounterflow (Plastic) ounterflow (Plastic) Fans E E Summer bypass damper % automatic % automatic Frost protection Frost heater Frost heater ontrols 8-Speed - igital 8-Speed - igital onnection to MS LON / KNX (optional) LON / KNX (optional) Mounting Wall Wall Sound m (d()) uct diameter (mm) x 5 x 5 ondensate discharge (mm) Electrical supply v / ph / 5Hz v / ph / 5Hz Max. power consumption w w Filter class x G / x F7 x G / x F7 Electric frost/post-heater 9w 9w Protection class IP IP asing insulation (mm) Weight (kg) 5 5 imensions (L x x H) mm 6 x x 5 6 x x 5 Part No Passive House ertification imensions Performance 55 5 H I J 5 Extract Supply I The uplexvent V96SE is tested and certified by the Passive House Institute based on the following criteria: Thermal comfort Effective heat recovery Electric power consumption ir tightness alancing adjustability Sound insulation Indoor air quality Frost protection ERTIFIE OMPONENT Passive House Institute E F H J G Q O P N M L K uct outlets, model R Inner diameter of female outlet collar ø 5 mm. Supply air to dwelling. Extract air from dwelling to unit. Exhaust air out. Outdoor air to unit E F G K uct outlets, model L Inner diameter of female outlet collar ø5mm. Exhaust air out. Outdoor air to unit. Supply air to dwelling. Extract air from dwelling to unit L STTI PRESSURE (Pa) E S E5 S6 E6 S5 E S S7 E7 E8 S9E9 S8 S E l/sec m /hr IR FLOW + excludes motors. Motor warranty one year from date of purchase. * Guidance only. ependant upon system pressure. Model E F G H I J K L V96SE ccessories See switches/accessories for more details. v airflow.com ustomer Services airflow.com

12 uplexvent V96SE Professional Line Top Entry - Up to 5 m /hr air volume Fitted with an additional electric post-heater, the unit keeps the indoor air temperature at the required temperature level at all times hence maintains indoor air comfort whilst saving energy during the winter period. The V96SE is designed with a unique triple filter facility including a F7 pollen filter which provides additional protection against invisible, harmful particles and creates an ultra hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. The unit includes a digital controller with L display which incorporates 8-speed air flow control, weekly ventilation programming, filter maintenance indicator, separate fan control for easy commissioning and the brand new smart frost protection facility which significantly reduces the energy consumed to protect the heat exchanger from freezing (see below for more information). On-demand ventilation can be achieved by using humidity and O sensors which boost the air volume gradually based on the moisture and occupancy levels in the dwelling. It is also possible to integrate the unit into a uilding Management System via the corresponding US converter (LON or KNX) to monitor and control unit s functions by a central control system. Having the latest, low energy E fan technology, the V96SE complies with the ErP 5 standards. The unit comes with an outstanding 5 year warranty +, is SP ppendix Q eligible, tested by TUV laboratories and also certified by the Passive House Institute. Triple Filter esign The majority of the MVHR units in the U.K incorporate G or G coarse filters on the extract / supply air side. These filters catch only coarse particles such as insects and leaves to protect the heat exchanger. F7 fine filters on the other hand are highly efficient, catch invisible particles such as pollen, spore, bacterium and dust entering the lungs. uplexvent Professional Line units are the only MVHR units which incorporate triple filter design combining G course filters with the F7 fine filter. This significantly improves the indoor air quality and lowers your maintenance costs. G Filter F7 Filter New Smart Frost Protection Traditional Traditional Frost Frost Protection Protection Logic Logic 5 5 Supply Supply ir ir Extract Extract ir ir Supply Supply ir ir +X +X ca.+ ca.+ +X +X FH FH ~% ~% % % % % New New Smart Smart Frost Frost Protection Protection Logic Logic Extract Extract ir ir ca.+ ca.+ (efrosting) (efrosting) ~6% ~6% % % ca. +6 ca. +6 EPH EPH ca. ca. ca. ca. ca. ca. Exhaust Exhaust ir ir ca. ca. Outdoor Outdoor ir ir Exhaust Exhaust ir ir 6 Outdoor ir 6 Outdoor ir Timing Timing and energy and energy consumption consumption graph graph when when Timing Timing and energy and energy consumption consumption graph graph when when frost heater frost heater is used is used electric electric pre-heater pre-heater is usedis used (ca. 5% (ca. less 5% energy less energy consumption) consumption) Time Time Time Time % utomatic ypass The unit is equipped with an automatic, % bypass which totally isolates the heat exchanger so that no air passes through it. This provides effective cooling in the summer season. ontrols Ideal indoor air quality is achieved by automatically adjusted ventilation uplexvent V96SE is controlled via a 8 speed digital control providing the following features: 8 speed control where all speeds are % adjustable utomatic boost function with delay timer Filter maintenance reminder via counter clock (standard) / via pressure sensor (optional) Heater control for post-heater Supply ir to the dwelling Exhaust ir Extract ir from the dwelling Outdoor ir On the traditional frost protection method, the outdoor air is pre-heated before passing through the heat exchanger. This way the unit could still provide balanced ventilation even when the frost protection was on. However, the electric heater kicks in intermittently hence consumes more energy than needed. Supply air fan Exhaust air fan Heat exchanger Electric pre-heater 5 Frost heater 6 Electric bypass damper The new Smart Frost Protection method works in a more energy efficient manner which constantly monitors the heat exchanger conditions and uses the frost heater only when necessary. This significantly reduces the energy consumption and provides more heat recovery throughout the winter season. onnection to MS via LON or KNX Self diagnostic via fault signal relay On-demand control via humidity and O sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on extract air temperature or supply air temperature Internet connection available airflow.com ustomer Services airflow.com

13 uplexvent VSE Professional Line Top Entry - Up to 5 m /hr air volume Key Features SP ppendix Q uplexvent VSE The uplexvent VSE is a highly efficient mechanical supply and extract ventilation unit with heat recovery for an air capacity of up to 5 m /hr. It is a wall mounted unit and is delivered complete with a wall mounting plate and condensate drain. The unit is made of a galvanised steel double-skin casing which is powder coated both internally and externally to meet hygiene requirements. For use in medium sized dwellings up to m * Extract up to 9 m /hr at Pa Galvanised steel, double skin casing Triple filter design with F7 pollen filter Over 9% thermal efficiency and low SFP New smart frost protection heater uilt-in electric post-heater utomatic, % summer bypass uto cut-out switch for extra safety Eight speed digital control with L display and MS (LON / KNX) connection SP ppendix Q eligible and PSSIVE HOUSE Institute certified omplies with uilding Regulations 5 year warranty + Moreover, the mm thick insulation in the casing avoids any thermal bridging and significantly reduces noise levels. The VSE includes an easily removable, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air where its thermal efficiency up to 9%. t no point do the airstreams mix. Tested by the RE (uilding Research Establishment) and eligible for the SP ppendix Q VSE SFP Efficiency K+ Wet room.89 9% K+ Wet rooms.79 9% K+ Wet rooms.79 89% K+ Wet rooms.8 89% K+5 Wet rooms.9 88% K+6 Wet rooms. 88% K+7 Wet rooms.5 87% Technical ata Specification uplexvent VSE R uplexvent VSE L ir flow m³/hr / Pa / 5 / 5 Thermal efficiency Up to 9% Up to 9% Heat exchanger ounterflow (Plastic) ounterflow (Plastic) Fans E E Summer bypass damper % automatic % automatic Frost protection Frost heater Frost heater ontrols 8-Speed - igital 8-Speed - igital onnection to MS LON / KNX (optional) LON / KNX (optional) Mounting Wall Wall Sound m (d()) uct diameter (mm) x 6 x 6 ondensate discharge (mm) J Electrical supply v / ph / 5Hz v / ph / 5Hz I Max. power consumption 8w H 8w Filter class x G / x F7 x G / x F7 Electric frost heater 9w 9w Electric post-heater 9w 9w Protection class IP IP asing insulation (mm) Weight (kg) 6 K L 6 imensions (L x x H) mm 68 x 7 x x 7 x 678 Part No E F G Passive House ertification The uplexvent VSE is tested and certified by the Passive House Institute based on the following criteria: Thermal comfort Effective heat recovery Electric power consumption ir tightness alancing adjustability Sound insulation Indoor air quality Frost protection ERTIFIE OMPONENT Passive House Institute imensions Performance 68 H I J 5 Extract Supply G 678 uct outlets, model R Inner diameter of female outlet collar ø6mm. Supply air to the dwelling. Extract air from dwelling to unit. Exhaust air out. Outdoor air to unit E F K uct outlets, model L Inner diameter of female outlet collar ø6mm. Exhaust air out. Outdoor air to unit. Supply air to the dwelling. Extract air from dwelling to unit L STTI PRESSURE (Pa) E S E5 E S5 S E6 S6 E9 S9 E8 S8 E7 S7 E S l/sec IR FLOW m /hr + excludes motors. Motor warranty one year from date of purchase. Model E F G H I J K L VSE * Guidance only. ependant upon system pressure. ccessories See switches/accessories for more details. v airflow.com ustomer Services airflow.com

14 uplexvent VSE Professional Line Top Entry - Up to 5 m /hr air volume Triple Filter esign Fitted with an additional electric post-heater, the unit keeps the indoor air temperature at the required temperature level at all times hence maintains indoor air comfort whilst saving energy during the winter period. The VSE is designed with a unique triple filter facility including a F7 pollen filter which provides additional protection against invisible, harmful particles and creates an ultra hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. The unit includes a digital controller with L display which incorporates 8-speed air flow control, weekly ventilation programming, filter maintenance indicator, separate fan control for easy commissioning and the brand new smart frost protection facility which significantly reduces the energy consumed to protect the heat exchanger from freezing (see below for more information). On-demand ventilation can be achieved by using humidity and O sensors which boost the air volume gradually based on the moisture and occupancy levels in the dwelling. It is also possible to integrate the unit into a uilding Management System via the corresponding US converter (LON or KNX) to monitor and control unit s functions by a central control system. Having the latest, low energy E fan technology, the VSE complies with the ErP 5 standards. The unit comes with an outstanding 5 year warranty +, is SP ppendix Q eligible, tested by TUV laboratories and also certified by the Passive House Institute. The majority of the MVHR units in the U.K incorporate G or G coarse filters on the extract / supply air side. These filters catch only coarse particles such as insects and leaves to protect the heat exchanger. F7 fine filters on the other hand are highly efficient, catch invisible particles such as pollen, spore, bacterium and dust entering the lungs. uplexvent Professional Line units are the only MVHR units which incorporate triple filter design combining G course filters with the F7 fine filter. This significantly improves the indoor air quality and lowers your maintenance costs. G Filter F7 Filter New Smart Frost Protection Traditional Traditional Frost Frost Protection Protection Logic Logic 5 5 Supply Supply ir ir Extract Extract ir ir Supply Supply ir ir +X +X ca.+ ca.+ +X +X FH FH ~% ~% % % % % New New Smart Smart Frost Frost Protection Protection Logic Logic Extract Extract ir ir ca.+ ca.+ (efrosting) (efrosting) ~6% ~6% % % ca. +6 ca. +6 EPH EPH ca. ca. ca. ca. ca. ca. Exhaust Exhaust ir ir ca. ca. Outdoor Outdoor ir ir Exhaust Exhaust ir ir 6 Outdoor ir 6 Outdoor ir Timing Timing and energy and energy consumption consumption graph graph when when Timing Timing and energy and energy consumption consumption graph graph when when frost heater frost heater is used is used electric electric pre-heater pre-heater is usedis used (ca. 5% (ca. less 5% energy less energy consumption) consumption) Time Time Time Time % utomatic ypass The unit is equipped with an automatic, % bypass which totally isolates the heat exchanger so that no air passes through it. This provides effective cooling in the summer season. ontrols Ideal indoor air quality is achieved by automatically adjusted ventilation uplexvent VSE is controlled via a 8 speed digital control providing the following features: 8 speed control where all speeds are % adjustable utomatic boost function with delay timer Filter maintenance reminder via counter clock (standard) / via pressure sensor (optional) Heater control for frost heater and post-heater Supply ir to the dwelling Exhaust ir Extract ir from the dwelling Outdoor ir On the traditional frost protection method, the outdoor air is pre-heated before passing through the heat exchanger. This way the unit could still provide balanced ventilation even when the frost protection was on. However, the electric heater kicks in intermittently hence consumes more energy than needed. Supply air fan Exhaust air fan Heat exchanger Electric pre-heater 5 Frost heater 6 Electric bypass damper The new Smart Frost Protection method works in a more energy efficient manner which constantly monitors the heat exchanger conditions and uses the frost heater only when necessary. This significantly reduces the energy consumption and provides more heat recovery throughout the winter season. onnection to MS via LON or KNX Self diagnostic via fault signal relay On-demand control via humidity and O sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on extract air temperature or supply air temperature Internet connection available 6 airflow.com ustomer Services airflow.com

15 uplexvent V5SE Professional Line Top Entry - Up to 59 m /hr air volume Key Features SP ppendix Q uplexvent V5SE The uplexvent V5SE is a highly efficient mechanical supply and extract ventilation unit with heat recovery for an air capacity of up to 59 m /hr. It is a wall mounted unit and is delivered complete with a wall mounting plate and condensate drain. The unit is made of a galvanised steel double-skin casing which is powder coated both internally and externally to meet hygiene requirements. For use in large sized dwellings up to m * Extract up to 57 m /hr at Pa Galvanised steel, double skin casing Triple filter design with F7 pollen filter Over 9% thermal efficiency and low SFP New smart frost protection heater uilt-in electric post-heater utomatic, % summer bypass uto cut-out switch for extra safety Eight speed digital control with L display and MS (LON / KNX) connection SP ppendix Q eligible and PSSIVE HOUSE Institute certified omplies with uilding Regulations 5 year warranty + Moreover, the mm thick insulation in the casing avoids any thermal bridging and significantly reduces noise levels. The V5SE includes an easily removable, aluminium heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air where its thermal efficiency up to 9%. t no point do the airstreams mix. Tested by the RE (uilding Research Establishment) and eligible for the SP ppendix Q V5SE SFP Efficiency K+ Wet room.9 78% K+ Wet rooms.9 8% K+ Wet rooms.89 8% K+ Wet rooms.9 8% K+5 Wet rooms.97 8% K+6 Wet rooms. 8% K+7 Wet rooms.5 8% Technical ata Specification uplexvent V5SE R uplexvent V5SE L ir flow m³/hr / Pa 568 / / 58 Thermal efficiency Up to 9% Up to 9% Heat exchanger ounterflow (luminium) ounterflow (luminium) Fans E E Summer bypass damper % automatic % automatic Frost protection Frost heater Frost heater ontrols 8-Speed - igital 8-Speed - igital onnection to MS LON / KNX (optional) LON / KNX (optional) Mounting Wall / Floor Wall / Floor Sound m (d()) uct diameter (mm) x x ondensate discharge (mm) Electrical supply v / ph / 5Hz v J/ ph / 5Hz Max. power consumption 5w I H 5w Filter class x G / x F7 x G / x F7 Electric frost heater 9w 9w Electric post-heater 5w 5w Protection class IP IP asing insulation (mm) Weight (kg) 88 K 88 imensions (L x x H) mm 78 x 578 x 78 L 78 x 578 x 78 Part No imensions E F G Passive House ertification The uplexvent V5SE is tested and certified by the Passive House Institute based on the following criteria: Thermal comfort Effective heat recovery Electric power consumption ir tightness alancing adjustability Sound insulation Indoor air quality Frost protection Performance ERTIFIE OMPONENT Passive House Institute uct outlets, model R Inner diameter of female outlet collar ø mm. Supply air to the dwelling. Extract air from dwelling to unit. Exhaust air out. Outdoor air to unit E F L M uct outlets, model L Inner diameter of female outlet collar ø mm. Exhaust air out. Outdoor air to unit. Supply air to the dwelling. Extract air from dwelling to unit + excludes motors. Motor warranty one year from date of purchase. Model E F G H I J K L M V5SE G H I J K STTI PRESSURE (Pa) E S Extract Supply S7 E7 S6 E6 E5 S5 E S E9 S9 E8 S S E 5 IR FLOW * Guidance only. ependant upon system pressure. ccessories l/sec m /hr See switches/accessories for more details. v 8 airflow.com ustomer Services airflow.com

16 uplexvent V5SE Professional Line Top Entry - Up to 59 m /hr air volume Triple Filter esign Fitted with an additional electric post-heater, the unit keeps the indoor air temperature at the required temperature level at all times hence maintains indoor air comfort whilst saving energy during the winter period. The V5SE is designed with a unique triple filter facility including a F7 pollen filter which provides additional protection against invisible, harmful particles and creates an ultra hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. The unit includes a digital controller with L display which incorporates 8-speed air flow control, weekly ventilation programming, filter maintenance indicator, separate fan control for easy commissioning and the brand new smart frost protection facility which significantly reduces the New Smart Frost Protection Traditional Traditional Frost Frost Protection Protection Logic Logic 5 5 Supply Supply ir ir Extract Extract ir ir Supply Supply ir ir +X +X ca.+ ca.+ +X +X FH FH ~% ~% % % % % energy consumed to protect the heat exchanger from freezing (see below for more information). On-demand ventilation can be achieved by using humidity and O sensors which boost the air volume gradually based on the moisture and occupancy levels in the dwelling. It is also possible to integrate the unit into a uilding Management System via the corresponding US converter (LON or KNX) to monitor and control unit s functions by a central control system. Having the latest, low energy E fan technology, the V5SE complies with the ErP 5 standards. The unit comes with an outstanding 5 year warranty +, is SP ppendix Q eligible, tested by TUV laboratories and also certified by the Passive House Institute. New New Smart Smart Frost Frost Protection Protection Logic Logic Extract Extract ir ir ca.+ ca.+ (efrosting) (efrosting) ~6% ~6% % % ca. +6 ca. +6 EPH EPH ca. ca. ca. ca. ca. ca. Exhaust Exhaust ir ir ca. ca. Outdoor Outdoor ir ir Exhaust Exhaust ir ir 6 Outdoor ir 6 Outdoor ir Timing Timing and energy and energy consumption consumption graph graph when when Timing Timing and energy and energy consumption consumption graph graph when when frost heater frost heater is used is used electric electric pre-heater pre-heater is usedis used (ca. 5% (ca. less 5% energy less energy consumption) consumption) Time Time Time Time The majority of the MVHR units in the U.K incorporate G or G coarse filters on the extract / supply air side. These filters catch only coarse particles such as insects and leaves to protect the heat exchanger. F7 fine filters on the other hand are highly efficient, catch invisible particles such as pollen, spore, bacterium and dust entering the lungs. uplexvent Professional Line units are the only MVHR units which incorporate triple filter design combining G course filters with the F7 fine filter. This significantly improves the indoor air quality and lowers your maintenance costs. % utomatic ypass The unit is equipped with an automatic, % bypass which totally isolates the heat exchanger so that no air passes through it. This provides effective cooling in the summer season. ontrols Ideal indoor air quality is achieved by automatically adjusted ventilation uplexvent V5SE is controlled via a 8 speed digital control providing the following features: 8 speed control where all speeds are % adjustable utomatic boost function with delay timer Filter maintenance reminder via counter clock (standard) / via pressure sensor (optional) Heater control for frost heater and post-heater G Filter Supply ir to the dwelling Exhaust ir Extract ir from the dwelling F7 Filter Outdoor ir On the traditional frost protection method, the outdoor air is pre-heated before passing through the heat exchanger. This way the unit could still provide balanced ventilation even when the frost protection was on. However, the electric heater kicks in intermittently hence consumes more energy than needed. Supply air fan Exhaust air fan Heat exchanger Electric pre-heater 5 Frost heater 6 Electric bypass damper The new Smart Frost Protection method works in a more energy efficient manner which constantly monitors the heat exchanger conditions and uses the frost heater only when necessary. This significantly reduces the energy consumption and provides more heat recovery throughout the winter season. onnection to MS via LON or KNX Self diagnostic via fault signal relay On-demand control via humidity and O sensors Separate fan control for ease of commissioning Weekly ventilation programming allows users to pre-set the ventilation levels scheduled for different days Indoor temperature control based on extract air temperature or supply air temperature Internet connection available airflow.com ustomer Services airflow.com

17 I uplexvent VSE Professional Line Top Entry - Up to 85 m /hr air volume Key Features Technical ata ontrols For use in large sized dwellings up to m * Extract up to 79 m /hr at Pa Galvanised steel, double skin casing Triple filter design with F7 pollen filter Up to 9% thermal efficiency and low SFP uilt-in electric or water post-heater utomatic, % bypass and frost protection uto cut-out switch for extra safety Eight speed digital control with L display and MS (LON / KNX) connection omplies with uilding Regulations 5 year warranty + Specification uplexvent VSE R uplexvent VSE L ir flow m /hr / Pa 88 / 88 / Thermal efficiency Up to 9% Up to 9% Heat exchanger ounterflow (luminium) ounterflow (luminium) Fans E E Summer bypass damper % automatic % automatic Frost protection Frost heater Frost heater ontrols 8-Speed - igital 8-Speed - igital onnection to MS LON / KNX (optional) LON / KNX (optional) Mounting Floor Floor Sound m (d()) uct diameter (mm) x x ondensate discharge (mm) Electrical supply v / ph / 5Hz v / ph / 5Hz Max. power consumption 5w E F 5w Filter class x G / x F7 x G / x F7 Electric frost heater w w J Ideal indoor air quality is achieved by automatically adjusted ventilation uplexvent VSE is controlled via a 8 speed digital control providing the following features: 8 speed control where both fans are % adjustable utomatic boost function with delay timer Filter maintenance reminder via counter clock (standard) / via pressure sensor (optional) Heater control for frost heater and post-heater onnection to MS via LON or KNX Self diagnostic via fault signal relay On-demand control via humidity and O sensors uplexvent VSE With its powerful air volume capacity and high thermal efficiency the uplexvent VSE is suitable for large family houses or light commercial applications. The automatic, % summer bypass facility isolates the heat recovery function and helps to effectively cool the inside air during the summer months. Electric post-heater w (optional) w (optional) Water post-heater w (optional) w (optional) Protection class IP IP asing insulation (mm) 5 5 Weight (kg) 6 6 imensions (L x x H) mm 9 x 7 x N M L 9 K x 7 x Part No G H O P Q Separate fan control for ease of commissioning Weekly ventilation programming allows users to preset the ventilation levels scheduled for different days Indoor temperature control based on extract air temperature or supply air temperature Internet connection available Having the triple filter design with an F7 pollen filter, the VSE provides additional protection against invisible, harmful particles and creates an ultra hygienic environment. The unit includes an easily removable, aluminium heat exchanger and can be equipped with a built-in electric or water post-heater to increase the heat performance of the system. 9 MOEL - L imensions E F G H I J K Performance H I J K E F G M N O P Q Extract Supply MOEL - R uct outlets, inner diameter of collar ømm + excludes motors. Motor warranty one year from date of purchase. Model E F G H I J VSE K L M N O P Q R S T L Outdoor air to unit Extract air from the dwelling Supply air to the dwelling Exhaust air out Pipe connections. Supply water to the radiator. Return water from the radiator. Supply liquid to the water heater. Return liquid from the water heater R S T Electrical connections 5. onnection cable Humidity sensor 6. onnection cable ontrol panel O sensor LON converter 7. Feed cable istribution panel STTI PRESSURE (Pa) E S S S5 E E5 S6 E6 S7 S8 E7 S9 E8 S E9E l/sec m /hr IR FLOW ccessories * Guidance only. ependant upon system pressure. See switches/accessories for more details. v L M airflow.com ustomer Services airflow.com

18 I uplexvent V5 Professional Line Side Entry - Up to m /hr air volume Key Features SP ppendix Q Passive House ertification For use in small sized dwellings up to m * Extract up to 6 m /hr at Pa Tested by the RE (uilding Research Establishment) and eligible for the SP ppendix Q The uplexvent V5 is tested and certified by the Passive House Institute based on the following criteria: uplexvent V5 Unique maintenance feature enables external access from outside dwelling Triple filter design with F7 pollen filter Up to 9% thermal efficiency and low SFP New smart frost protection uilt-in electric post-heater utomatic, % summer bypass Low height (6mm) for suspended ceiling application SP ppendix Q eligible and PSSIVE HOUSE Institute certified omplies with uilding Regulations 5 year warranty + V5 SFP Efficiency K+ Wet room.9 W/l/s 79% K+ Wet rooms.95 W/l/s 8% K+ Wet rooms. W/l/s 8% K+ Wet rooms.9 W/l/s 8% Technical data Specification uplexvent V5 R uplexvent V5 L ir flow m /hr / Pa / 6 / 6 Thermal efficiency Up to 9% Up to 9% Heat exchanger ounterflow (luminium) ounterflow (luminium) Fans E E Summer bypass damper % automatic % automatic Frost protection Frost heater Frost heater ontrols -Speed - Manual igital (optional) -Speed - Manual igital (optional) Mounting Floor / eiling Floor / eiling Sound m (d()) Thermal comfort Effective heat recovery Electric power consumption ir tightness alancing adjustability Sound insulation Indoor air quality ontrols Four Speed Switch ERTIFIE OMPONENT Passive House Institute uplexvent V5 is controlled via a speed switch or an optional digital controller which allows % variable control at each speed setting. Easy to install, simple to use Manual/automatic boost with timer Maintenance indicator and self diagnostic uplexvent V5 brings a new approach to the heat recovery ventilation with a low profile design. It can be integrated into the structure of the dwelling, i.e. above the entry door so routine maintenance can be performed from the outside corridor without disturbing the resident. This ensures quick and easy maintenance and is ideal for apartment blocks. The unit includes an easy to remove, aluminium heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air where at no point do the airstreams mix. uct diameter (mm) 8 x 8 x ondensate discharge (mm) Electrical supply v / ph / 5Hz v / ph / 5Hz Max. power consumption w w Filter class x G / x F7 x G / x F7 Electric frost/post-heater 9w 9w Protection class IP IP asing insulation (mm) Weight (kg) 5 5 imensions (L x x H) mm 9 x 57 x 6 9 x 57 x 6 Part No Manual control switch igital controller imensions Performance FRONT PRT OF UNIT Right side SEEN FROM OVE SEEN FROM EHIN + excludes motors. Motor warranty one year from date of purchase. Model V Left side Model R Inner diameter of female outlet collar ømm. Outdoor air to the unit. Supply air to rooms. Extract air to the unit. Exhaust air outside Model L Inner diameter of female outlet collar ømm. Extract air to the unit. Exhaust air outside. Outdoor air to the unit. Supply air to rooms STTI PRESSURE (Pa) 5 E F Extract E9 Supply S9 E S E8 S8 E7 S7 5 E5 E6 S6 S5 N M L K E S 5 E S l/sec G H O J Q P m /hr IR FLOW * Guidance only. ependant upon system pressure. ccessories See switches/accessories for more details. v airflow.com ustomer Services airflow.com

19 uplexvent V5 Professional Line Side Entry - Up to m /hr air volume The unit incorporates the brand new smart frost protection facility which significantly reduces the energy consumed to protect the heat exchanger from freezing (see below for more information). Equipped with a -speed simple controller the unit also has an automatic, % bypass facility which fully covers the heat exchanger at the pre-defined temperature and helps to effectively cool the indoor air during the summer months. The V5 is designed with a unique triple filter facility including a F7 pollen filter which provides additional protection against invisible, harmful particles and creates an ultra hygienic environment, particularly relevant for those suffering from asthma or other respiratory conditions. The unique multi spigot design gives installers the flexibility to connect the ducting to the unit from different directions which reduces the number of duct connections and saves time on installation. Fitted with an electric post-heater, the unit keeps the indoor air temperature at the required temperature level at all times hence saves energy especially during the winter period. Having the latest, low energy E fan technology, the V5 complies with the ErP 5 standards. The unit comes with an outstanding 5 year warranty +, is SP ppendix Q eligible, tested by TUV laboratories and also certified by the Passive House Institute. % utomatic ypass The unit is equipped with an automatic, % bypass which totally isolates the heat exchanger so that no air passes through it. This provides effective cooling in the summer season. Exhaust ir Outdoor ir Multi Spigot esign The unique multi spigot design gives installers the flexibility to connect the ducting to the unit from different directions which reduces the number of duct connections and saves time on installation. OUTSIE INSIE Supply ir Extract ir Outdoor ir Exhaust ir New Smart Frost Protection Supply ir to the dwelling Extract ir from the dwelling Traditional Traditional Frost Frost Protection Protection Logic Logic 5 5 Supply Supply ir ir Extract Extract ir ir Supply Supply ir ir +X +X ca.+ ca.+ +X +X FH FH ~% ~% % % % % New New Smart Smart Frost Frost Protection Protection Logic Logic Extract Extract ir ir ca.+ ca.+ (efrosting) (efrosting) ~6% ~6% % % ca. +6 ca. +6 EPH EPH ca. ca. ca. ca. ca. ca. Exhaust Exhaust ir ir ca. ca. Outdoor Outdoor ir ir Exhaust Exhaust ir ir 6 Outdoor ir 6 Outdoor ir Timing Timing and energy and energy consumption consumption graph graph when when Timing Timing and energy and energy consumption consumption graph graph when when frost heater frost heater is used is used electric electric pre-heater pre-heater is usedis used (ca. 5% (ca. less 5% energy less energy consumption) consumption) Time Time On the traditional frost protection method, the outdoor air is pre-heated before passing through the heat exchanger. This way the unit could still provide balanced ventilation even when the frost protection was on. However, the electric heater kicks in intermittently hence consumes more energy than needed. Time Time The new Smart Frost Protection method works in a more energy efficient manner which constantly monitors the heat exchanger conditions and uses the frost heater only when necessary. This significantly reduces the energy consumption and provides more heat recovery throughout the winter season. ccessability Landlords can protect their investment by insuring planned maintenance from outside the dwelling to preserve building fabric, ensure occupier wellbeing and save energy without the need to access the dwelling or disturb the tenant. This significantly shortens maintenance time and saves on service cost. Supply air fan Exhaust air fan Heat exchanger Electric pre-heater 5 Frost heater 6 Electric bypass damper 6 airflow.com ustomer Services airflow.com

20 I uplexvent V8 Professional Line Side Entry - Up to 6 m /hr air volume Key Features SP ppendix Q Passive House ertification For use in medium sized dwellings up to 8 m * Extract up to m /hr at Pa Unique maintenance feature enables external access from outside dwelling Triple filter design with F7 pollen filter Over 9% thermal efficiency and low SFP New smart frost protection heater uilt-in electric post-heater Tested by the RE (uilding Research Establishment) and eligible for the SP ppendix Q V8 SFP Efficiency K+ Wet room.79 W/l/s 9% K+ Wet rooms.79 W/l/s 9% K+ Wet rooms.86 W/l/s 9% K+ Wet rooms. W/l/s 9% K+5 Wet rooms.6 W/l/s 89% K+6 Wet rooms.8 W/l/s 89% The uplexvent V8 is tested and certified by the Passive House Institute based on the following criteria: Thermal comfort Effective heat recovery Electric power consumption ir tightness alancing adjustability Sound insulation Indoor air quality Frost protection ERTIFIE OMPONENT Passive House Institute uplexvent V8 uplexvent V8 brings a new approach to the heat recovery ventilation with a low profile design. It can be integrated into the structure of the dwelling, i.e. above the entry door so routine maintenance can be performed from the outside corridor without disturbing the resident. This ensures quick and easy maintenance for and is ideal for apartment blocks. utomatic, % summer bypass Low height (9mm) for suspended ceiling application SP ppendix Q eligible and PSSIVE HOUSE Institute certified omplies with uilding Regulations 5 years warranty + The unit includes an easy to remove, plastic heat exchanger which transfers warmth from the outgoing waste airstream into the incoming fresh air where its thermal efficiency up to 9%. t no point do the airstreams mix. Technical ata Specification uplexvent V8 R uplexvent V8 L ir flow m /hr / Pa 56 / / 99 Thermal efficiency Up to 9% Up to 9% Heat exchanger ounterflow (Plastic) ounterflow (Plastic) Fans E E Summer bypass damper % automatic % automatic Frost protection Frost heater Frost heater ontrols -Speed - Manual igital optional -Speed - Manual igital optional Mounting Floor / eiling Floor / eiling Sound m (d()) uct diameter (mm) 8 x 5 8 x 5 ondensate discharge (mm) Electrical supply v / ph / 5Hz v / ph / 5Hz Max. power consumption 65w 65w Filter class x G / x F7 x G / x F7 Electric frost heater 9w 9w Electric post-heater 9w 9w Protection class IP IP asing insulation (mm) Weight (kg) imensions (L x x H) mm 6 x 66 x 9 6 x 66 x 9 Part No ontrols Four Speed Switch uplexvent V8 is controlled via a speed switch or an optional digital controller which allows % variable control at each speed setting. Easy to install, simple to use Manual/automatic boost with timer Maintenance indicator and self diagnostic Manual control switch igital controller imensions Performance FRONT PRT OF UNIT Right side SEEN FROM OVE SEEN FROM EHIN Left side Model - R Inner diameter of female outlet collar ø5mm. Outdoor air to the unit. Supply air to rooms. Extract air to the unit. Exhaust air outside Model - L Inner diameter of female outlet collar ø5mm. Extract air to the unit. Exhaust air outside. Outdoor air to the unit. Supply air to rooms G H O STTI PRESSURE (Pa) 5 E F Extract Supply E 5 S E9 S9 E8 5 S8 E7 S7 N 5 M L K E6 S6 E5 S5 E 5 S E S J Q P l/sec m /hr IR FLOW + excludes motors. Motor warranty one year from date of purchase. * Guidance only. ependant upon system pressure. Model V ccessories See switches/accessories for more details. v 8 airflow.com ustomer Services airflow.com