D-LED TV 32 DVB-T2. Please read these instructions before operating your set and retain them for future reference. Model: K32D301B2 ENG

Transcription

1 D-LED TV 32 DVB-T2 ENG Operating Instruction Please read these instructions before operating your set and retain them for future reference. Model: K32D301B2

2

3 Contents Features 3 Safety Warning and Notice 4 Mounting and Connecting 5 Packing list 5 Mounting the TV set 5 Connecting peripheral equipment 6 Control Panel Keys 8 Remote Control 8 General Operating Instructions 10 Power On 10 Standby 10 Signal Source Selection 11 Menu Operation Instruction 11 CHANNEL 11 PICTURE 12 SOUND 13 OPTIONS 14 TIME 14 LOCK 15 REC option 15 Time-shift option 16 EPG option 16 Hotel Function (optional) 16 USB Media Function 17 Simple troubleshooting 19 Technical Specifications 20 Base Installation Instructions 21 Features 1. High-quality LED backlight LED screen, energy saving, environment-friendly, ultra-thin, with brilliant features. 2. With built-in high quality speakers that will give you pure audio-visual enjoyment and save your table space. 3. Has many connectors. You can directly connect your DVD, vidicon etc. to appropriate input connectors and enjoy beautiful image. The product can be used as a computer monitor with VGA and HDMI connectors. Also it can be used as a TV device when you insert the antenna. 4. Much faster response time completely eliminates shadow on picture. Seeing film and playing game will be more fluent. 5. Enough colours. 6. Wider viewing angle, higher brightness, higher contrast, lower consumption. 7. Intelligent image mode and sound mode offer you intelligent audiovisual effect. 8. Built-in the latest digital comb filter, which makes image clearer. The internal 3D De-Interlace technique can totally eliminate the screen dithering caused by interlace signals. 9. Has perfect timing functions, you can set time to turn off. It will also be turned off in state of no signals. 10. Automatic operation is made convenient with a telecontrol device. 11. Auto-setup function helps you set the image to best performance in several seconds in VGA mode. 12. Auto colour balance adjustment technology equips your device with the best colour setting for all different kinds of display adapters in VGA mode. 13. Automatic noise reduction can significantly eliminate background noise caused by menu interference and the noise caused by weak signals, making the picture on the screen clear. 14. Supports USB interface. 15. Supports H.264 FULL HD receiver and supports PVR functionality. 16. Ultra-thin and super narrow design 3

4 Safety Warning and Notice Thank you for choosing the LED TV with LED backlight made by our company, a valuable product with excellent quality and multiple functions. This device will bring you more audiovisual enjoyment. Its design ensures user s safety. All devices are strictly tested before leaving factory. However, incorrect use can lead to electric shock or fire. In order to ensure safety and extend its life, please read the manual and marking label carefully before using it and comply with the following safety instructions. Please keep the user manual for later use. Warning May result in casualties Attention May result in personal injury or property losses Indicate the behaviours that must be prohibited Indicate the operations that must be performed Under Following Conditions: Power failure or unstable voltage. Abnormal sound or smell coming from the device. Damaged AC power cord. Damages to the TV set due to falling off, knocking or impact. Liquid or foreign matters entering into the TV set. Turn off the TV set immediately, unplug the power cord from the power outlet, and contact authorized maintenance personnel. If coal gas or other flammable gases leak, do not unplug the power cord of the TV set or other electric appliances; instead, close the valve of the gas immediately and open the doors and windows. Warning Only use 240VAC 60/50Hz power supply. This TV must be connected to a three pin socket outlet for safety. All cables can be connected or disconnected only after power supply is turned off. Do not fix the TV set on instable position, or else it may cause falling off, damage, or even fire. Do not put the TV set in the environment: 1. With direct sunshine, moisture, overheating, undercooling or heavy dust; 2. With flammable or explosive substances; 3. With flammable or corrosive gases; 4. In bathroom, kitchen, etc. Do not use damaged or improper power socket, and ensure that the plug and socket are connected properly. Keep the power plug and socket free from dust and metal pieces. Do not damage the power cord: 1. It is prohibited to refit the power cord; 2. Do not put heavy objects on the power cord; 3. Keep the power cord away from heat sources; 4. Do not drag the power cord when unplugging. Do not connect too many appliances to one power strip, or else it may cause fire due to high power consumption. Do not put open flame (e.g. lit candle) near the TV set, or else it may cause electric shock or fire. Do not put the container filled with water on the TV set, to avoid electric shock or fire caused by water splash. Do not insert any sharp objects, metals or liquids into the signal connector or air vents, to avoid short circuit and product damage as well as electric shock. The slots on the case are designed to release heat, prevent all inside components from reaching extra high temperatures and to enable long-term normal operation. Please do not cover the holes during the positioning. 4

5 Do not touch the plug with wet hands, or else it may cause electric shock. Do not turn on the TV set in thunderstorm weather; instead, unplug the power plug and antenna connector to avoid lightning strike. Do not disassemble the TV set by yourself as this can cause electric shock or fire. Contact qualified personnel for maintenance. Attention Do not let children climb onto the TV set. Keep the small accessories away from children s reach to avoid swallowing. If the TV set is not going to be used for a long time, please turn off the device and unplug the power cord. Before cleaning the TV set, unplug the power cord and wipe with soft cloth; do not use chemical reagents and avoid situations in which foreign substances can enter the device. The incorrect cleaning agents (such as cleaning fluid, water, etc) can damage product s appearance, erase information provided on the product, even enter the device and damage components and result in the device inability to display programme. To adjust the position or angle of the TV set, please disconnect all wires and move them slowly to avoid falling off. Do not rub with hard objects and do not hit, bend or squeeze the screen. Do not use device immediately after transferring it from low to high temperature environment as this can cause condensation inside your device and its failure. If the screen breaks and the liquid splashes on your skin, immediately wash with clean water for 15 minutes and visit your doctor. To carry the TV set with hands, please grasp its bottom corners; do not apply force on the panel. When the same image or active image with fixed words is displayed for a long time, icons will leave image persistence on screen which will not disappear long after powering off. This undesirable effect is not covered by warranty. Healthy TV watching: 1. Watch in appropriate light; poor light or long-term watching can hurt your eyes. 2. If a headset is used, adjust the volume appropriately to avoid hurting your hearing. Unplug the power cord of the device to cut off the power supply. If a power plug or appliance coupler is used as a disconnecting device, easy operation should be ensured. Power plug should be connected firmly. Loose power plugs may cause sparkle and fire. All the technical specifications stated in the user manual and on the package are subject to changes without prior notice. If there are slight deviations between the user manual and actual operation, consider the latter to be valid. Mounting and Connecting Packing list 1. The TV set. 2. User Manual. 3. Remote control. 4. Power cord (or attached to TV set). 5. Component Transfer Cable (Optional) Mounting the TV set The TV set should be mounted near the AC power socket for easy plugging and unplugging. For your safety, please select appropriate wall mount bracket or base. To avoid injuries, place the TV set on a stable surface or fix it on a firm wall. Ask qualified personnel to mount the TV set on the wall. Improper mounting may result in instable TV set. 5

6 Mount on the wall 30cm Mount on the base 30cm 10cm 10cm 10cm 10cm 7cm Obstructs the air circulation Wall 10cm Ventilation Please keep the minimum space around the TV as shown in the figure. Do not cover air vents or insert any objects into the enclosure. Do not put the device in limited space, e.g. bookcases or embedded closets, unless the TV set is properly ventilated. Obstructs the air circulation Wall Tips on Installation Do not place the TV set in an area with mechanical vibrations. Do not place the TV set in an area where insects may enter. Do not mount the TV set against air conditioner as internal panel of the display can condense and cause failure. Do not place the TV set in an area with strong magnetic field as electromagnetic waves can interfere with it and damaged it. Connecting peripheral equipment You can connect various devices to the TV set and view high quality images. If a video device has HDMI, AV, PC and other output/input ports, select one of them and connect to the corresponding input or output ports of the TV set. After connecting it, press the SOURCE key and signal source menu will be displayed on the screen. Press and key to select the input signal and press OK key to confirm. The connecting mode is shown in the figure. Remarks: 1. After connecting to equipment with MHL function, please select HDMI1 as input signal source. 2. ARC function is optional, please refer to the device. 3. COMPONENT interface is optional, please refer to the device. 4. If there is a COMPONENT interface, component and AV share AUDIO-IN interface. 5. The peripheral equipment and cables described in this manual should be purchased separately. 6

7 Connecting power supply r Yellow (Video signal cable) White(AUDIO-L signal cable) Red (AUDIO-R signal cables) Antenna connection Power cord To power socket ( VAC 60/50Hz) USB interface YPbPr/YCbCr cable VGA cable Warning When connecting outdoor antenna to signal port of the TV set, please turn off the main power switch of the TV set first. Do not place the outdoor antenna near high voltage main power line to avoid electric shock. The wired network antenna connected to this TV set must be isolated from the protective grounding; otherwise it will cause fire or other hazards. VGA input connection HDMI signal cable HDMI signal cable MHL signal cable Mobile phone or other equipment with MHL function MHL function connection Connect to the AV device with HDMI interface HDMI input connection Earphone port HDMI signal cable Connect to the audio devices with ARC function ARC function connection Audio cable Audio cable Connect to the device with YPbPr/YCbCr output interface YPbPr/YCbCr input connection Video cable Connect to the devices with AV output interface (e.g. DVD, VCR, game console) AV input connection 7

8 Control Panel Keys Power LED indicator and remote receiving window. 2. Standby: To switch the TV on or back to standby. 3. MENU ( ): Press this key to enter main menu. 4. VOL-, VOL+ ( ): Press these two keys to add or reduce volume. In OSD menu, press the two keys to adjust the analogue value of the selected item. These keys have the same functions as t / u key on the remote control. 5. CH-, CH+ ( ): Press these two keys to select the channel. In OSD menu, press the two keys, sharing the function with / key on the remote control, to adjust the items. 6. SOURCE ( ): Press this key to enter the menu of signal source and choose signal source. Note: Different models may have different appearances; please refer to the actual device. Remote Control Remote control battery installation method Take off the cover of battery box, insert two AAA batteries with 1.5 volts, and adjust with the polarity of the remote control battery box. Precautions for use of remote control 1. When using the remote control you should point it to the remote-control inductive window. The objects between the remote control and inductive window may hinder normal operation. 2. Do not expose the remote control to fierce vibrations. Furthermore, do not expose the remote control to direct sunlight, for the thermal energy will cause the distortion of the remote control. 3. If the remote-control inductive window of the main device is exposed to direct sunlight or intense illumination, the remote control can malfunction; please change the angle of illumination or this device, or approach the inductive window to operate the remote control. 4. Low battery voltage influences the remote control distance. You should replace the battery. If you do not use the remote control for long or if the battery is exhausted, please take out the battery, in order to avoid battery leakage causing corrosion of the remote control and its damage. 8

9 5. Do not use different batteries. Combining new and old batteries is not allowed. You should use batteries in pair. 6. Do not throw batteries into fire, do not charge or disassemble, especially do not charge, assemble or disassemble, heat or burn used batteries. Please observe the related environmental protection regulations on used batteries. Remote Control Key Instruction Note: Appearance of the remote control can differ from the one shown in the figure. Adjust the provided information to match the actual remote control. Name Function Description POWER ( ) Switching the receiver in and out of standby mode. WIDE (16:9) Switching picture ratio. MUTE ( ) Switching off sound when viewing programme. Numerical Entering numbers. F1 Picture freeze on or off. Channel list ( ) Searching through channel list. SMART S Smart sound mode selection. SMART P Smart image mode selection. Cursor key (,,, ) OK VOL+/VOL- MENU SOURCE CH+/CH- Moving cursor up/down/left/right across menu items or change date of EPG. Confirmation of current settings. Press to adjust the volume. Press this key to display menu. Press this key to display signal source selection menu. Channel changing keys. Changing different pages of current channel EPG. Displaying current programme information. Programme recording. INFO REC Return ( ) Press this key to return to the last channel watched. L/R Selecting NICAM mode (in ATV signal source) INDEX ( ) In DTV mode, press INDEX key to display a list of recorded programmes. In DTV mode, press ZOOM key to zoom aspect ratio if ZOOM ( ) there is a graphic display; if there are no graphic displays and USB port is connected to memory, press this key to delay broadcast of currently played television programmes. REVEAL ( ), TTX ( ), HOLD ( ), LIST ( ), LANGUAGE ( ), RADIO ( ) Red key SUBTITLE (Green key) FAV (Yellow key) EPG (Blue key) For teletext operation or USB operation. Muti-function red key. Teletext green key or displaying subtitle message if current channel has subtitle option. Teletext yellow key or Favourite key used for setting or displaying your favourite programmes. Teletext blue key, or showing the Electronic Program Guide of current channel during no-menu state. 9

10 Remote control user manual about teletext TeleText: Press Teletext key, it loops in 3 modes: Mix Display > Text Mode > TeleText Off. Thereinto: TText Mode is Automatic Mode. In Automatic mode, the system automatically selects TOP, Fastext, or Default mode as appropriate, depending on the data being received. In Text Mode or Mix Display, press number 0~9, / key to select text page. Reveal: All hidden characters are displayed for 6 seconds. Hold: Toggle hold on or off for current display pages. If the page is not held, it will become held, which will prevent its update. If the page is currently held, the hold will be removed thus allowing the page to update. When the page is held, this is indicated by a Hold prompt. Index: In Fastext mode, request the index page if the index link is valid, or the Packet 8/30 initial page if valid, or page 100. In TOP mode, if the Hitlist option is enabled, toggle the system between the current text page and the Hitlist menu; otherwise, request page 100. In List mode, reset the list of preferred pages either to that of the current channel as read from the EEPROM if fitted, or to the default list (pages 100, 101, 102, 899), and request the first page in the list. In Default mode, request the Packet 8/30 initial page if valid, or page 100. List: Toggle between L ist mode and the current acquisition mode (Fastext, TOP, or Default). Red, Green, Yellow, Blue: Request the associated page in the display block according to the acquisition mode. In TOP Hitlist mode, the Red, Green, and Blue commands control selections from the Hitlist menu, while the Yellow command is ignored. General Operating Instructions Before switching on the device, please make sure that the power supply is stable and that the antenna cable is well connected. Power On Tune Type DTV + ATV Please select an OSD Language Germany Italy Netherlands English Portuguese Polish Croatian Greece Ireland Norway French German Dutch Arabic Spanish Italian Russian Farsi Hungary Luxembourg Poland OK: Enter MENU: Return Standby Fig. 1 Fig. 2 Plug the power cord into electrical socket. Press key on the remote control or on the TV set to turn on the TV. Please select an OSD Language menu (Fig.1) is displayed on the screen. Press / / / key on the remote control to select desired language, then press OK key on the remote control to confirm. Select DVB type is displayed on the screen. Press / key on the remote control to select desired DVB type, then press OK key to continue to the next step (Fig.2). (The provided example shows channel searching DVB type under DVB-T.) Press / key to select Tune Type: DTV + ATV, ATV, DTV. Press key. You can select country where you are by pressing / / /, then press OK key to confirm.the device will initiate auto tuning. Press key on the remote control, TV will be in standby. Special Attention: 1. The TV set will automatically switch to standby if there is no signal input for 5 minutes after switching the TV on. 2. The TV set will automatically switch to standby when the preset time for turning off is reached. 3. If you do not use it for a long time, please turn off the power supply of the device. Do not let the device work in standby state for a long time. 10

11 Signal Source Selection Press SOURCE key either on the remote control or on the panel. Input Source will be displayed on the screen (Fig.3). Then press / key on remote control or CH+/CH- key on the panel to select the signal source. Press OK key on the remote control and the TV will replace the current signal source with the source you selected. (Note: YPBPR signal source is optional, please refer to the device.) Input Source DTV ATV AV YPBPR HDMI 1 HDMI 2 VGA USB CHANNEL Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Signal Information OK:Enter OK: Enter MENU: Return Menu Operation Instruction Fig. 3 Fig. 4 Press MENU key on the remote control or on the panel. The screen will display the main menu (Fig.4). 1. Press / key on the remote control or VOL+/VOL- key on the panel to select the adjustment sort menu, which includes 6 sorts: CHANNEL, PICTURE, SOUND, OPTION, TIME, LOCK. 2. Press / key on the remote control or CH+/CH- key on the panel to select what you want to adjust in sort menu. 3. Press OK key on the remote control to set or enter into next menu. 4. Press MENU key to exit the main menu when the TV displays the Main Menu. Press MENU key to return to the previous menu when the TV displays the sub-menu. Press SOURCE key to display the signal source menu. 5. During the operation, the options which cannot be adjusted at current mode will be hidden automatically and the colour of these options will be changed into gray. 6. Menu Operation Instructions provided in this manual is explained according to TV mode. The operations in other modes are similar to the one in TV mode. Users can take it as reference. Note: / / / keys in this Manual stand for the direction cursor keys on the remote control unless specifically defined otherwise. The operating instructions in the text below are all based on keys on the remote control. Please understand the keys on the panel by yourself. CHANNEL Press MENU key and CHANNEL menu will be displayed on the screen (Fig.4). Press / key to select the item you want to adjust or set. Auto Tuning Press MENU key and CHANNEL menu will be displayed on the screen. Press / keys to select Auto Tuning. Press OK key and the DVB Select type will be displayed on the screen. Press / keys on the remote control to select desired DVB type, then press OK key to continue to the next step (Fig.2). (The provided example shows channel searching DVB type under DVB-T.) Press / keys to select Tune Type: DTV + ATV, ATV, DTV. Press key. You can select desired country by pressing / / /, then press OK key to confirm. The device will start auto tuning (Fig.5). During the auto tuning, you can press MENU key to return and exit auto tuning. Channel Tuning ATV : 0 Programme(s) DTV : 0 Programme(s) Radio : 0 Programme(s) Data : 0 Programme(s) 1 % MHz MENU Exit Fig. 5 11

12 DTV Manual Tuning Press MENU key and CHANNEL menu will be displayed on the screen. Press / key to select DTV Manual Tuning. Press OK key to enter into DTV Manual Tuning menu (Fig.6). Press / key to select channel, then press OK key to conduct search. After searching, the DTV Manual Tuning menu will close automatically. DTV Manual Tuning UHF CH 21 ATV Manual Tuning Press MENU key and CHANNEL menu will be displayed on the screen. Press / key to select ATV Manual Tuning. Press OK key to enter ATV Manual Tuning menu (Fig.7). Press / key to select the Current CH. Press / key to search manually. After searching, you can save the searched channel to other positions. At this time, press / key to select Storage To, and then press / key to choose the channel number. After selecting Fine-Tune, press / key to tune from low frequency or high frequency. During manual searching, you can also press MENU key to interrupt the search and return to the last menu. Programme Edit Press MENU key and CHANNEL menu will be displayed on the screen. Press / key to select Programme Edit. Press OK key to enter Programme Edit menu (Fig.8), then press / key to select the channel you want to edit. Delete: : Select a channel and press Red key to delete it. Move: Select a channel and press Green key, press / key to select the channel position where you want to move the channel. Press OK key to confirm. You can press MENU key to return last menu. Favourite: Choose a channel and press Yellow key. Favourite icon will appear behind the selected channel. Press Yellow key again to cancel it. Press MENU key to return main menu. Skip: Select a channel and press Blue key. SKIP icon will appear behind the selected channel. Press Blue key again to cancel it. Press MENU key to return to main menu. NO SIGNAL Bad Normal Good Fig. 6 ATV Manual Tuning Storage To 1 DK Current CH 1 Search Fine-Tune Frequency MHz Save MENU: Return Fig. 7 Programme Edit 1 C-01 2 S-42 3 C-06 4 C-11 5 S-11 6 S-13 7 C-21 8 C-51 ATV ATV ATV ATV ATV ATV ATV ATV Signal Information Press MENU key and CHANNEL menu will be displayed on the screen. Press / key to select Signal Information. Press OK key to enter into Signal Information menu. You can look through signal information. Delete Move Favourite Skip OK: Enter Fig. 8 MENU: Return Note: Before you press MENU key, please select the input source first. You can select it only in DTV mode. PICTURE Press MENU key and CHANNEL menu will be displayed on the screen. Press / key to select PICTURE (Fig.9), then press / key to choose the item you want to adjust or set. PICTURE Picture Mode User Color Temperature Standard Aspect Ratio Full Noise Reduction Middle PC Setting Picture Mode: Press OK key to enter into Picture Mode submenu. Press / key to select item want to adjust or set. OK: Enter Fig. 9 MENU: Return 12

13 Item Function Description Picture Mode Selecting picture mode Standard, Soft, User Dynamic four modes. Contrast Adjusting contrast of whole picture Increasing analogue value increases Contrast; Decreasing analogue value decreases Contrast (0~ 100). Brightness Adjusting brightness and black level of whole picture Increasing analogue value increases brightness; Decreasing analogue value decreases brightness (0~ 100). Saturation Adjusting colour depth of images Increasing analogue value increases green; Decreasing analogue value increases purple (0~100). Sharpness Adjusting sharpness of whole picture Increasing analogue value increases definition; Decreasing analogue value decreases definition (0~100). Tint Adjusting tint of whole picture Increase the analogue value to improve the depth; Decrease the analogue value to reduce the depth (0 ~100). Note: Tint can be adjusted only in NTSC system. Color Temperature: Press OK key to enter Colour Temperature submenu. Press / key to select colour temperature mode: Standard, Warm, Cool. Aspect Ratio: Press OK key to enter Aspect Ratio submenu. Press / key to select aspect ratio mode: Auto, 4:3, Full, Film, Subtitle, PC Mode. Noise Reduction: Press OK key to enter Noise Reduction submenu. Press / key to select Noise Reduction mode: Off, Low, Middle, High. SOUND Press MENU key and CHANNEL menu will be displayed on the screen. Press / key to select SOUND (Fig.10), then press / key to select the item you want to adjust or set. Sound Mode: Press OK key to enter Sound Mode submenu. Press / key to select item you want to adjust or set. SOUND OK: Enter Fig. 10 Sound Mode Music Surround Sound Off AD Switch Off MENU: Return Item Function Description Sound Mode Selecting Sound Temperature Standard, Music, Movie, User five modes. Treble Adjusting treble value Increasing analog value increases treble; Decreasing analog value decreases treble (0~100). Bass Adjusting bass value Increasing analogue value increases bass; Decreasing analogue value decreases bass (0~100). Balance djusting balance between left and right speaker Increasing analogue value decreases left volume; Decreasing analogue value decreases right volume (L50 ~R50). Surround Sound: Press OK key to enter Surround Sound submenu. Press / key to select surround sound mode: Off, Surround, SRS Trusurround XT. AD Switch: Press OK key to enter AD Switch submenu. Press / key to select On or Off. If you select On, you can adjust AD volume by pressing / key (only available in DTV). 13

14 OPTIONS Press MENU key and CHANNEL menu will be displayed on the screen. Press / key to select OPTIONS (Fig.11), then press / key to select the item you want to adjust or set. OSD Language: Press OK key to enter OSD language submenu. Press / / / key to select desired language. Press MENU key to return to the previous menu. Note: The operation method of the Audio Language is the same as that of OSD Language (Only available in DTV). Hearing Impaired: Press OK key to select On or Off (only available in DTV). OPTION OK: Enter OSD Language English Audio Language English Hearing Impaired Off PVR File System Restore User Default Blue Screen On Software Update(USB) Fig. 11 MENU: Return PVR File System: Press OK key to enter PVR File System submenu (Fig.12). Choose storage disc in select disc submenu. Press / key to select Check PVR File System and, after pressing OK key, the device will initiate the check. After a successful check, press MENU key to exit the menu. Press REC key to record. Note: Insert a U disc into the device interface before operating the PVR File System function. Restore User Default: After pressing OK key, Are you sure? will be displayed on the screen. Press key to resume to the factory setting or key to cancel the current operation. Blue Screen: Press OK key to select On or Off. Open or close Blue Screen function. Software Update (USB): Update software by a U disc. Select Disk C: Check PVR File System USB Disk Format Time Shift Size Speed Free Record Limit Fig. 12 Start 6 Hr. TIME Press MENU key and CHANNEL menu will be displayed on the screen. Press / key to select TIME (Fig.13), then press / key to select the item you want to adjust or set. Clock: When in DTV input source, the clock will be synchronized with TV programme. TIME Clock Off Time Off On Time Off Sleep Timer Off Time Zone Berlin +1 Off Time: Press OK key to enter Off Time submenu. Press / key to select Off Time, Hour and Minute, then press / key to adjust the off timer values. The TV will switch off automatically at the time you select. Note: You can set Hour and Minute only if the Off Time is not in Off mode. OK: Enter Fig. 13 MENU: Return On Time: Press OK key to enter On Time submenu. Press / key to select On Time, Hour and Minute, Source, Channel, Volume, then press / key to adjust value to set the on timer values. The TV will switch on automatically and tune to the mode of your choice at the time you select. Sleep Timer: Press OK key to enter Sleep Time submenu. Press / key to select sleep time: Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min. Time Zone: Press OK key to enter into Time Zone submenu. Press / / / key to select your time zone. (Only available in DTV). 14

15 LOCK Press MENU key and CHANNEL menu will be displayed on the screen. Press / key to select LOCK. After pressing OK key, press Numerical key to input default password 0000 and enter LOCK menu (Fig.14). Then press / key to select the item you want to adjust or set. LOCK Lock System Set Password Block Program Lock System: Press OK key to select On or Off. Block program option can work when Lock System option is activated. OK: Enter MENU: Return Fig. 14 Set Password: Press OK key and Set Password dialogue box will appear on the screen. Press the numerical key to input old password, input new password twice to complete the password change and return to last menu. Note: Please make sure you remember your new password after changing. Otherwise, the system will lock forever. Block Program: Press OK key and Block Program menu will appear on the screen. Press / key to select the channel that you want to lock, and then press the green key to lock or unlock. Finally press MENU key to exit menu operation. REC option In DTV mode, press REC key and REC option menu will be displayed on the screen (Fig.15). The system will immediately start recording. Press REVEAL key to stop and quit recording. After completing the recording process, press INDEX key and the recorded list will pop up. Select the file you want to play. You can read the file information by pressing Green key or you can delete it by pressing Red key. Press OK key to play it. Note: The recording function can only support memory devices with Fat32 file system. Memory devices with other file systems need to be formatted. Before formatting a memory device, back-up useful data because the content of memory devices cannot be recovered after formatting. [00:00:29] (0003:10:24) Play FB FF FB 30S FF 30S Pause Stop 14:21 Fig. 15 Icon Description Indicates that the system is recording a programme. Indicates the current programme number. Indicates the recorded programme duration. Indicates the longest duration that a U disc can provide (relevant to the capacity of U disc) Indicates the current programme time. Play: Select this icon. Press "OK" key to play the video or set A-B repeat. FB: Select this icon. Press "OK" key to fast back. Press "INDEX" key to play normally. FF: Select this icon. Press "OK" key to fast forward. Press "INDEX" key to play normally. FB 30s: Select this icon. Press "OK" key to play backward 30 seconds. FF 30s: Select this icon. Press "OK" key to play forward 30 seconds. Pause: Select this function. Press "OK" key to play or pause. Stop: Select this icon. Press "OK" key to stop and quit the display window. 15

16 Time-shift option In DTV mode, press ZOOM key. Time-shift option menu will be displayed on the screen (Fig. 16) and the programme will be in suspended state. Press INDEX key to resume the programme. Press REVEAL key to stop and quit time-shift. When user leaves programme for a short time, time-shift function can suspend and cache the playing programme to a U disc. The programme can be resumed when user decides to play it. 1 Time Shift [00:00:00/00:00:08/01:20:00] Play FB FF FB 30S FF 30S Pause Stop Fig : Icon Description Indicates that the programme is in suspended state. Indicates the Current programme time. Indicates the time when the programme was suspended. Indicates the longest cache time that a U disc can provide. Play: Select this icon. Press "OK" key to play the video or set A-B repeat. FB: Select this icon. Press "OK" key to fast back. Press "INDEX" key to play normally. FF: Select this icon. Press "OK" key to fast forward. Press "INDEX" key to play normally. FB 30s: Select this icon. Press "OK" key to play backward 30 seconds. FF 30s: Select this icon. Press "OK" key to play forward 30 seconds. Pause: Select this function. Press "OK" key to play or pause. Stop: Select this icon. Press "OK" key to stop and quit the display window. EPG option In DTV mode, press EPG key and EPG option menu will be displayed on the screen (Fig.17). User can perform the following operations with the red, green, yellow, and blue multifunction keys. Icon Record Info Schedule Remind Description Press the red key to enter the sub-menu. You can choose the time of the programme you want to record. Press the green key to display the detailed information about the programme. Press the yellow key to see your previous settings. Press the blue key to set the time when you want to be reminded about the programme you want to see. Hotel Function (optional) Press MENU key on the remote control to display the main TV menu and then press 4578 on the remote control to display the hotel function menu. Press Up/DOWN key to enter the menu and select the item you want to adjust. Then press Left/Right key to adjust the value or state (Fig. 18). PROGRAMME GUIDE TIME 31 Aug 14:23 1 DR1 2 DR2 3 Tegnsprogstol... 4 TV 2 (Fyn) No Information Folk og fae (32) Ingen tegnsprogstolkning Vild med dig Record Info Schedule Remind MENU:Return Fig. 17 D ON Fig

17 USB Media Function Please insert USB storage device into USB interface of TV and press SOURCE key. Input Source menu will be displayed on the screen. Then press / key to select USB. Press OK key to enter USB (Fig.19). USB 2.0 PHOTO MUSIC MOVIE TEXT Fig. 19 Note: 1. USB function supports file formats with video file/sound file/graphic file/text file. Certain nonstandard USB storage devices may not be recognised. Please replace these with a standard USB storage device. 2. When playing a file, streaming media system has certain limitations for each format. If a file exceeding the system limit is played, then its reproduction will be wrong. 3. Do not pull out USB storage devices while the system is working. This may cause problems to the system or equipment. 4. The system supports USB1.1 and USB2.0 connector and the standard transport protocol, such as U discs and removable hard disc storage devices. USB device file format must be FAT or FAT32. It does not support NTFS. 5. The USB interface of this TV set can supply a voltage of 5V and the maximum current is 500mA; accurate identification of the multimedia player will be affected when a storage device over 500mA is used, which is a normal phenomenon. Remote Control Shortcut Keys The INDEX, ZOOM, REVEAL, TTX, HOLD, LIST, LANGUAGE, RADIO keys on the remote control are used for USB operation. Press / key to select the adjustment sort menu, which includes 4 sorts: PHOTO, MUSIC, MOVIE, TEXT. Press / key to select PHOTO. Then press OK key to read your photo documents. Press / / / key to select photo and press OK key (After the photo was selected, the file lower right corner displays a red hook. You can choose photos to join them to the playlist.). Press INDEX key on the remote control to play. If you do not choose anything, the device will automatically join all the photos from the file in a playlist. Note: The operation method of the MUSIC, MOVIE and TEXT are the same as that of PHOTO. Please refer to PHOTO options. Basic Function: When displaying photos, press INFO key. A toolbar will be displayed at the bottom of the screen. (Press key to hide toolbar) Icon Description Play/Pause: Press / key to select this function. Press "OK" key to play or pause. Prev.: Press / key to select this function. Press "OK" key to read the previous photo. Next: Press / key to select this function. Press "OK" key to read the next photo. Stop: Press / key to select this function. Press "OK" key to stop playing and to return to the previous menu. Repeat: Press / key to select this function. Press "OK" key to select Repeat 1 or Repeat ALL or Repeat None. Random Off: Press / key to select this function. Press "OK" key to turn on/off random playing. Music: Press / key to select this function. Press OK key to play background music. (Music and photos should be placed in the same folder, or you can select a piece of music from your music file first.) 17

18 Icon Description Playlist: Press / key to select this function. Press OK key to view playlist. Info. : Press / key to select this function. Press OK key to view photo information, including resolution, size and so on. Rotate: Press / key to select this function. Press OK key to rotate photos clockwise. Rotate: Press / key to select this function. Press OK key to rotate photos counter-clockwise. Zoom In: Press / key to select this function. Press OK key to enlarge photos. Zoom Out: Press / key to select this function. Press OK key to reduce photos. Move View: If photo exceeds the screen, use this function to move across the photo. FB: Press / key to select this function. Press OK key to fast back. Press "INDEX" key to play normally. FF: Press / key to select this function. Press OK key to fast forward. Press "INDEX" key to play normally. MUTE: Press / key to select this function. Press OK key to fast back. Press "MUTE" key to switch off sound. Goto Time: Press / key to select this function. Press OK key to select the time to play. Set A-B repeat: Press / key to select this function. Press OK key to set A and B. The film will be repeated during A to B interval. Slow Forward: Press / key to select this function. Press OK key to slow down play speed. Press INDEX key to play normally. Step Forward: Press / key to select this function. Press OK key to play step by step. Press INDEX key to play normally. Aspect Ratio: Press / key to select this function. Press OK key to select Auto, 4:3, Full. 18

19 Simple troubleshooting ENG Symptom Cause Solution Snowflake speckle and sound noise. TV image is better, but has noise. No image. No sound. TV image has stripes. TV image has shadows. TV has no sound. Computer does not display anything and it does not prompt any signal input, red indicator LED twinkling. Remote control distance is short; it loses control. Computer display is faint. Computer display image does not fill the screen. Noise Signals while turning off. Cannot operate this device. 1. Antenna cable connector is loose, cable is damaged. 2. Antenna cable type does not match. 3. Direction or position of antenna is incorrect. 4. Signal is weak. Antenna cable connector is loose, cable is damaged. Power plug is loose, or power supply is not connected. Signal is exposed to interference, such as car, neon light, electric blower etc. 1. TV signal is reflected against a valley or building. 2. Direction of antenna is incorrect. 1. Volume setting is too low. 2. Sound is muted. Signal cable is loose or disconnected. 1. Receive window of remote control is covered by objects. 2. The battery energy of remote control is too low. 1. Adjustment is incorrect. 2. Display mode is incorrect. 1. Adjustment is incorrect. 2. Display mode is incorrect. Electrical discharge while turning off. Exterior influence, for example lightning, static electricity and so on, which can potentially interfere with normal operation of this device. 1. Check if the antenna cable connector plug is loose and if the cable is perfect. 2. Check antenna cable type (VHF/UHF) 3. Adjust direction or position of antenna. 4. Attempt to use signal amplifier. Check if the antenna cable connector plug is loose and check cable condition. Check if the power cord is well connected. Do not use electric blower around the device and adjust antenna cable direction to reduce interference. 1. Use high directional antenna. 2. Adjust direction of antenna. 1. Adjust volume to proper value. 2. Press MUTE key on remote control to eliminate mute. Check if the signal cable is loose or disconnected, and reconnect it. 1. Remove objects obstructing the receiver window of remote control. 2. Change batteries. 1. Use auto-adjustment function. 2. Use recommended mode. 1. Use Auto-adjustment function. 2. Enter PICTURE to adjust horizontal or vertical position. 3. Use recommended mode. It is normal. First disconnect the power supply and reconnect it after about 1-2 minutes, then turn on the TV again. 19

20 Technical Specifications Master unit Panel size 32" Max. Resolution Best Resolution 1360 Pixel Pitch mm mm Active Area mm mm Power Supply VAC 60/50Hz Power Consumption of Speaker 6W+6W Dimension (L x H x W) and Weight Panel size The base Unpacking Packing Net Weight Gross Weight Excluding base (mm3) / / / 32 Including base (mm3) (mm3) 4.0 kg 6.0 kg Operating environment: temperature: 5 ~40 ; RH: 10%~85%; atmospheric pressure: 86kPa~104kPa Storage environment: temperature: -20 ~55 ; RH: 5%~95%; atmospheric pressure: 86kPa~104kPa Technical specifications for TV 1. Supported Systems: ATV: PAL D/K, I, B/G, SECAM D/K, B/G, L DTV: DVB-T/C/T2 2. TV(RF): 75Ω Imbalance 3. AV Video-Input: 75Ω, 1VP-P, RCA 4. AV Audio-Input: 20KΩ, 500mV RMS 5. HDMI Video Input: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p VGA display mode 32 NO. Mode Resolution Refresh rate Hz VGA Hz 3 SVGA Hz 4 XGA Hz 5 WXGA Hz Recommended mode: 1360X768@60Hz Power management Mode Normal working Standby Power Consumption 32 55W 0.5W 20

21 Base Installation Instructions ENG Different bases follow different installation methods. Please choose the appropriate installation method according to the actual situation. Method: Install the metal support and iron base according to directions provided in the figure below and lock them tightly using 4 PCS Φ5 7mm flat-head machine screws after having aligned the screw holes (with the exception of the already installed element). Align the base pad holes with the screws and then fasten to the metal support. Distinguish between right and left foot mat installation direction (this is redundant with the bases with already installed pads). Then lock base and base support using 4 PCS Φ4 (10+8)mm H-head machine screws. Finally, lock the whole base module on machine back cover using 1 Φ5 25mm P-head machine screw. Φ5 7mm screws Base pad Metal support Iron base Base support Φ5 25mm screw Φ4 (10+8)mm screws Remark: The actual base and device appearance may be different from pictures; please refer to the actual device. 21

22 Model: K32D301B2