3 Contents of the Guide 3 The following is an index to the contents of the separate Reference book with page references: How to set up BeoCenter 1, 4 Connect your TV cables, 5 Connect a video tape recorder, 6 Connect a decoder, 7 Connect a set-top box, 8 Socket panel on the rear, 9 Audio system with BeoCenter 1, 10 Distribute sound and pictures with BeoLink, 12 Set up BeoCenter 1 in a link room, 14 Your key to using BeoCenter 1 4 Using the Beo4 remote control 5 Use the menus 5 Use the display below the screen Watch television 6 Step through tuned programs 6 See list of all programs 7 Adjust the picture format 7 Turn Beocenter 1 to the left or right Use the radio 20 Listen to tuned programs 20 See list of all programs First-time setup of BeoCenter 1, 16 Register extra equipment, 18 Edit tuned programs, 20 Re-tune or add programs, 26 Settings for TV position, 28 Choose menu language, 29 Adjust sound settings, 30 Adjust picture settings, 32 Set the time and date, 33 DVD Personal Preferences, 34 DVD Access Control, 36 Adjust sound 8 Adjust or mute the sound 8 Change sound type or language 9 Adjust speaker balance and choose speaker combination Look up Teletext information 10 Navigate in Teletext 11 Create or delete MEMO pages 11 Use MEMO pages Switch BeoCenter 1 on or off automatically, 40 The PIN-code system, 42 Looking after BeoCenter 1, 44 Close-up operation and socket panel, 45 Use program Groups 12 Select programs in a Groups 12 Create Groups 13 Move programs within a Groups If you have a BeoCord V 8000 video tape recorder, 46 If you have a Set-top Box Controller, 50 For your information, 54 Use the DVD player 14 Disc loading and playback 15 When playing an audio CD 15 When playing a DVD 15 The DVD disc menu The tool bar on the screen 16 The tool bar 17 The tool bar symbols 18 How to use the tool bar
4 4 Your key to using BeoCenter 1 Using the Beo4 remote control Look through the basic principles of the Beo4 remote control and try them out. Each button is explained below. Refer to Beo4 s own Guide for information about how to add extra functions to those shown in the Beo4 display. Switch on to TV programs TV TV FORMAT The Beo4 display shows the source you have selected, or extra functions available when Switch on a connected source and the SAT you press the LIST button BeoCenter 1 to watch e.g. set-top box (STB) V TAPE programs or videotapes RADIO Press RADIO to switch on and operate the radio Use the number keys to select programs, 0 9 Teletext pages, DVD chapters and titles, and DVD Switch on DVD and play a loaded disc CD tracks MENU Press MENU to call up the main SETUP menu. Enter information in on-screen menus. Press ss or tt while e.g. TV is on to select a program ss tt TV LIGHT RADIO If you have selected STB as your source, pressing MENU calls up the Set-top Box Group you have created SAT DVD CD Controller menu. Press MENU a second time for the main SETUP menu Press to select a subtitle language* V TAPE RECORD A TAPE TEXT Press to call up Teletext Press to select another audio language* Press to call up a menu or store settings, Press to bring up the DVD disc menu press and hold to call up program lists, or a DVD disc menu Step up or down through programs, menu TEXT 0 MENU Press to bring up the DVD on-screen tool bar Adjust volume press the middle to mute sound items or DVD chapters EXIT Exit on-screen menus Reveal additional functions in the Beo4 LIST display, e.g. FORMAT Switch BeoCenter 1 to standby LIST EXIT STOP *NOTE! Alternative subtitle and audio languages are only available on some discs.
5 5 Use the menus The menus on the BeoCenter 1 screen gives you access to a number of different options. When you enter the menu system, the first available menu is the SETUP menu. The display below the screen When you choose a source, such as TV, or a function, such as Teletext, the display changes accordingly as you make your selections. Menu name Menu options Option contents Information field TV SETUP PROGRAM GROUPS TUNING TV TUNING TIMER RECORDING PLAY TIMER OPTIONS STAND POSITIONS EDIT PROGRAM EDIT PROGRAMS ADD PROGRAM AUTO TUNING MANUAL TUNING LINK FREQUENCY ADD PROGRAM 1 DR1 AUTO TUNING 2 TV2 back select back select TV TV Press to switch on the television MENU Press to call up the TV SETUP menu Press to move between the different menu options ss tt Press to reveal different settings EXIT Press to call up a menu or store a setting you have made Press to leave the menu system
6 6 Watch television You can find a TV program which is tuned into your BeoCenter 1 in four ways By stepping through all tuned programs; By using the number keys to key in the number of the program you want; By calling up a program list of all the tuned programs; By selecting a program Group. Refer to the chapter Use program Groups for more information. While watching television you can also adjust picture format and turn the BeoCenter 1 to the left or right. Step through tuned programs To start watching television, press TV on the Beo4 remote control. The television automatically switches on to the last program you watched. TV 0 9 SAT Press to switch on BeoCenter 1 Press or to step up or down through the available TV programs Key in the number of the TV program you want Press another source button, e.g. SAT, to switch to set-top box programs Pressing 0 will swap between the current and previous TV programs. See list of all programs Choose a source, for example TV, and press and hold on the Beo4 remote control to call up a complete list of the available TV programs. You can also call up a program list for Groups of programs. TV BBC 0 9 Press to switch on the television Press and hold to call up the TV program list Step up or down through the available programs Press to call up the chosen program, or key in the number of the program you want to see Call up the program list for a specific Group TV Press to switch on the television BBC ss tt MY GROUP Press ss or tt repeatedly to step through your Groups Press to call up the chosen Group Press and hold to call up the program list for this Group ss tt Press ss or tt to see the program lists for all the other Groups NOTE! Refer to the separate Reference book for information about how to tune in TV programs. STB programs are only available if BeoCenter 1 is equipped with a built-in Set-top Box Controller and a set-top box is connected.
7 7 Adjust the picture format The picture format you choose is changed on the screen accordingly, either to a 16:9 widescreen picture or a standard 4:3 picture. The picture format you choose is not stored, when you switch to a different program or switch off BeoCenter 1, the standard 4:3 picture format is restored. Turn BeoCenter 1 to the left or right If your BeoCenter 1 is equipped with the motorised stand, you can turn BeoCenter 1 to the left or to the right via Beo4. You can also turn BeoCenter 1 manually. 1 DR2 2 TV EUROSPRT 5 ZDF 6 RTL BBC CNN 13 N SAT 1 16 SVT 2 17 NRK 18 TV4 TV PROGRAM LIST LIST FORMAT 1 2 Press repeatedly until FORMAT appears in the Beo4 display Press 1 or 2 to select a picture format: FORMAT 1 for a 4:3 picture, or FORMAT 2 for a 16:9 picture LIST STAND ss tt 1 9 Press repeatedly until STAND appears in the Beo4 display Press to turn BeoCenter 1 either to the left or the right, or use the number keys to choose a pre-defined position; 1 represents the outmost left position, 9 represents the outmost right position Refer to Settings for TV position in the separate Reference book for more information about how to preset viewing positions for BeoCenter 1. more select The program list for TV is now called up. It provides you with an overview of all your available TV programs. NEWS DR2 TV2 EUROSPRT ZDF RTL7 BBC CNN group select Groups list TV programs selected for a Group also appear in the program lists for all tuned TV programs. NOTE! When Beo4 is in radio mode, you cannot call up STAND in the Beo4 display.
8 8 Adjust sound Several sound adjustments possibilities are available in your BeoCenter 1. You can always adjust the volume or mute the sound completely. If programs are broadcasted with different sound types or languages, you can choose between them. If speakers are connected to your BeoCenter 1, you are free to choose the speaker combination you prefer. When you switch on BeoCenter 1 or one of the sources connected to it, the speakers you may have connected, can be cut in or out, depending on what kind of sound suits the source you are using. Adjust or mute the sound While you are watching television, you can adjust the sound volume at any time or mute the sound completely. VOL 26 MUTE Press or to adjust the volume up or down Press in the middle of the and button to mute the sound Press or again to bring the sound back Change sound type or language If different sound types or languages are available, you can store your favourite sound type when tuning in your TV programs. However, it is also possible to choose between sound types or languages when watching a program. LIST SOUND MONO STEREO EXIT Press repeatedly until SOUND* is shown in the Beo4 display Press to see the current sound type on your screen Press repeatedly to switch to another sound type or language in a multi-language programme Press to exit the SOUND function *In order to display SOUND on Beo4, you must first add it to the Beo4 list of functions. Refer to Beo4 s own Guide for further information.
9 9 Adjust speaker balance and choose speaker combination When you connect loudspeakers to your BeoCenter 1, you can adjust speaker balance and choose a speaker combination at any time. LIST SPEAKER ss tt 1 3 EXIT Press repeatedly until SPEAKER is shown in the Beo4 display Press to adjust the balance between the left and right speakers Press to select a speaker combination Press to exit the SPEAKER function Speaker combinations SPEAKER 1 Sound in the television speakers only. For programmes with dialogue, e.g. TV news. SPEAKER 2 Stereo sound in the two external front speakers. The BeoLab 2 subwoofer is active. For music CDs. SPEAKER 3 The television speakers, external front speakers and the BeoLab 2 subwoofer are active. For TV programmes in stereo. Refer to the chapter Adjust sound settings in the separate Reference book for further information on presetting a speaker combination. NOTE! Refer to the chapter Socket panel on the rear in the separate Reference book for more information about how to connect speakers to BeoCenter 1 and to the Guide supplied with the surround sound module for information on surround sound.
10 10 Look up Teletext information Teletext offers you a wealth of information. BeoCenter 1 helps you find it fast. The arrow keys on Beo4, the menu bar at the top of the screen and the highlighted cursor help you move to the page you want in a single step. When you get there, you can pause the turning of subpages to read them at your own pace. Navigate in Teletext Navigate through Teletext pages by using the menu bar at the top of the Teletext page. PAGE PROGRAM POINT HALT REC SETUP P100 BBC S100 Ons 13 Oct 12:39:34 PAGE PROGRAM POINT HALT REC SETUP P100 BBC S100 Ons 13 Oct 12:39:34 BeoCenter 1 can remember your favourite pages, bring you back to the previous page, reveal hidden messages or help you switch to another program s Teletext service. Via the SETUP feature, you can make as many as 9 favourite MEMO pages on each available Teletext service. Save a page with Teletext subtitles as MEMO page number 9, and Teletext subtitles appear automatically when this program is shown. Press TEXT to gain access to Teletext and EXIT to leave Teletext. If you press EXIT and leave Teletext before the page you want is found, the display TEXT advises you when the page is found. Press to see the page. Please note that no such notification will appear if you e.g. change programs or leave Teletext by selecting a new source, such as V.TAPE. To move to a new page > Key in the number of the page you wish to see, or > press ss to move the highlighted cursor to PAGE. > Press or to step between pages, and hold to step faster. > Pressing steps to index pages (100, 200, 300, etc.). To switch using visible page references > Press tt to move the cursor on the bar to POINT. > Press or to place the cursor on the page. > Move the cursor via the arrow keys to a page reference and press. To go back to the previous page > When you use POINT to step to another page, POINT on the menu bar will change to RETURN. > Press while on the new page to go back to the previous page. RETURN will only bring you one step back. Go back to other previously viewed pages by using the PAGE or MEMO functions. To move to another Teletext service > Press tt to move the highlighted cursor to PROGRAM. If MEMO pages have been created, MEMO will be highlighted when you switch on Teletext. Press or while MEMO is highlighted to find PROGRAM. > Press to call up a program list. > Press or to find a desired program. > Press to switch to another Teletext service.
11 11 Create or delete MEMO pages Your most frequently viewed Teletext pages can be saved as MEMO pages, making them easier to call up when viewing a Teletext service. You can save 9 favourite MEMO pages. Use MEMO pages If you have made favourite MEMO pages, you can step between them directly. PAGE MEMO1 POINT HALT REC SETUP P100 BBC S100 Ons 13 Oct 12:39:34 PAGE MEMO2 POINT HALT REC SETUP P100 BBC S100 Ons 13 Oct 12:39:34 To stop subpages from turning > Press STOP to stop subpages from turning, or > move the cursor to HALT and press. HALT will be replaced by a set of four digits. > Use and to step to the subpage you wish to see, or key in its number. > Press to restart page turning. To reveal hidden messages and the like > Move the cursor on the bar to t. > Press to change SETUP to REVEAL. > Press again to reveal hidden text on the current page. To create a MEMO page > Find a page you view often. > Press ss or tt to move the cursor along the menu bar to SETUP and press. The 9 available MEMO slots are shown by number. The first is highlighted. > Press to store the current page. The cursor moves to the next available MEMO slot. > Use the number keys on Beo4 to select the next teletext page you wish to store. > Repeat the procedure for each page you wish to store. > To leave the MEMO setup, press ss or tt to move the cursor to BACK and press. To view MEMO pages > Press TEXT to call up Teletext. > Press or to move between MEMO pages. > Press EXIT to leave Teletext. If you would like available Teletext subtitles to appear automatically for a particular program, store the Teletext subtitles page as MEMO page 9. To delete a MEMO page > Press ss or tt to move the cursor to SETUP and press. > Move the cursor to the MEMO page you wish to delete and press the yellow button. > Press the yellow button again to confirm.
12 12 Use program Groups If you have stored a lot of programs and want to get to your favourites quickly without going through the list each time, put them in a Group. You no longer need to step through programs you do not use. Name the Groups after the people who watch them Dad or Mary or according to the types of programs included, like News or Sports. When you have created and selected a particular Group, you only step through the TV or STB* programs belonging to this particular Group. Switch to a different Group to watch a different set of programs or switch from GROUPS to TV to see all the tuned TV programs. Select programs in a Group You can gain access to your Groups by activating Groups mode. Press the arrow keys to select the Group you are looking for, then step through the programs in this Group. TV Press to switch on the television ss tt Move left or right through the MY GROUP NEWS different Groups When you find the Group you want, press to select your Group 0 9 TV 2 BBC Step up or down through the programs in that particular Group, or use the number keys to key in the number of the program you want to see ss tt Move left or right to switch to SPORT another Group and press to call it up Press and hold in Groups mode to view a program list for the current Group. Create Groups It is possible to put together 8 different program Groups in BeoCenter 1, grouped either by user or by program type. Each Group can contain up to 18 programs. Copies of the same program can be stored in different Groups. PROGRAM GROUPS TUNING TIMER RECORDING PLAY TIMER OPTIONS STAND POSITIONS A GROUP TV SETUP back select PROGRAM GROUPS character MY GROUP... name PROGRAM GROUPS next accept move create GROUP PROGRAM GROUPS name move new group create group COPY TV TO MY GROUP 1 DR2 DR2 2 TV2 SKY NEWS ZDF 4 EUROSPORT RADIO 2 5 ZDF BBC 6 ARD SAT 1 16 SVT 2 17 NRK 18 TV4 copy accept *NOTE! In order to receive set-top box (STB) programs, your BeoCenter 1 must be equipped with a built-in Set-top Box Controller and a set-top box must be connected.
13 13 Move programs within a Group You can rearrange the order in which your programs appear within a Group and delete programs in a Group. > Press TV to switch on the television or RADIO to switch on the radio. > Press MENU to call up the TV SETUP menu. PROGRAM GROUPS is already highlighted. > Press to call up the PROGRAM GROUPS menu. > Press to move the cursor to an empty Group and press the green button to be able to name a new Group. > Press or for characters and ss or tt to move to the next or previous character space. > Press to store the name, and press again to be able to copy programs into the new Group. > Press or to find a program you wish to copy to the new Group. > Press tt to copy a TV program to your Group. > Press to store your Group. > Press to back up through previous menus or press EXIT to exit on-screen menus directly. Set-top box programs cannot be combined with TV and radio programs in the same Group. For more information about how to make STB program Groups, please refer to the chapter in the separate Reference book entitled If you have a Set-top Box Controller. DR2 TV2 EUROSPRT ZDF RTL7 BBC CNN NEWS group select > Press TV to switch on the television or RADIO to switch on the radio. > Press MENU to call up the TV SETUP menu. PROGRAM GROUPS is already highlighted. > Press to call up the PROGRAM GROUPS menu. > Press to highlight a Group and press to select it. > Press to highlight the program you wish to move or delete. > Press tt to move the program out of the list and press or to move it to the new position. > Press ss to move the program back into the list, or press the yellow button to delete it. When you delete a program in the list, the remaining programs contract. > If the program changed places with another program, then move this program to a new position. > Once you have finished moving or deleting programs in a group, press to store it.
14 14 Use the DVD player BeoCenter 1 allows you to play DVDs, video CDs and audio CDs. Loading is done via the LOAD bar below the television screen, and playback functions such as cueing, changing chapters, opening the DVD disc menu, pausing playback and slow motion are performed via the Beo4 remote control. When playing an audio CD, the BeoCenter 1 screen is blank. DVD loading and playback Loading a disc in the DVD player is done via the LOAD bar on the close-up operation panel on BeoCenter 1, just below the television screen. LOAD-bar To load a disc and begin playback > Press LOAD on the close-up operation panel. The loader slides out, and the display window prompts you to load a disc. > Place a disc in the loader as described to the left. > Press and hold LOAD. The loader retracts, DVD is activated and playback begins automatically.* To load a DVD while watching TV or listening to the radio, e.g. for playback at a later point in time, press LOAD once without holding the bar down. The loader retracts. Place a disc in the loader so that the side edges of the disc rest on top of the loader s side pads while the front edge rests under the loader s front pad. If you restart playback of a loaded disc after an interruption, BeoCenter 1 will prompt you to resume playback at the point of interruption. A window at the top left corner of the screen shows RESUME. Press to resume playback. Playback begins automatically from the beginning of the disc if is not pressed while the window is shown. *NOTE! If the DVD player can not recognise the format of a loaded disc, the disc is ejected and DVD LOAD is shown in the display window. This may be due to disc faults such as dust, dirt, fingerprints or scratches. Refer to the chapter Looking after BeoCenter 1 in the separate Reference book for more information about handling DVDs.
15 15 When playing an audio CD You can start or stop playback completely, step between tracks, or cue back and forth at different speeds on a disc via the Beo4 remote control. When playing a DVD You can start or stop playback, step between chapters, or cue back and forth without calling up the DVD on-screen menu. The DVD disc menu DVDs may contain particular functions, such as selection of individual scenes or chapters, subtitle language, etc. which are available via a disc menu. To change tracks on an audio CD DVD - 3 Press or to step to the next or previous track DVD Press repeatedly to jump to another track on the CD Enter the track number on Beo4 to step directly to this track To pause or stop playback of an audio CD DVD Press the DVD button on Beo4 to start playing a CD STOP STOP Press to pause playback Press to stop playback completely, or To change chapters on a DVD Press then or to switch to the next or previous chapter DVD DVD Press then or repeatedly to jump to another chapter on the disc Enter the chapter number on Beo4 to step directly to this chapter To pause or stop playback of a DVD DVD Press the DVD button on Beo4 to start playing a DVD Press to pause playback While DVD is selected Press the yellow button to bring up the disc menu Use the arrow keys to move ss tt from function to function on the disc Press twice to enter your choice Some DVDs offer special features which are temporarily available during playback, e.g. additional film sequences. These functions can be accompanied by a visual cue to let you know when they are available. In such situations, press twice in rapid succession to make a selection. press to resume playback. If playback has been completely stopped, press to restart playback from the beginning To cue or wind through an audio CD ss tt Press ss or tt to cue back and forth during playback Press to resume playback STOP Press to stop playback completely, or press to resume playback. If playback has been completely stopped, press to restart playback from the beginning To cue or wind through a DVD ss tt Press ss or tt to cue back and forth during playback ss tt Press again to change speed Press to resume playback NOTE! BeoCenter 1 may be able to playback disc with other files formats. If such a disc is loaded operate the on-screen menu as if a DVD was loaded.
16 16 The tool bar on the screen The main functions of the DVD player are accessible via the tool bar along the top of the screen. The on-screen tool bar gives you quick access to additional DVD functions. Zoom in on a paused screen picture, play in slow motion or start playback from a specific moment in elapsed time. To find out more about the individual functions and how to use them, refer to the following pages. The tool bar Move between the tool bar symbols and see the options for each function. The current settings are shown under the tool bar symbols. off 3en st no off 1 1 off 3en st The Feedback window at the far left end of the The Feedback window To use the tool bar during playback tool bar informs you of the current status of Alternate camera angle in use. This is > Press the blue button to call up the on-screen particular features. locked a disc feature which is only available on certain DVDs. Parental Control active. Refer to Access Control on page 36 in the tool bar. > Press ss or tt to move from function to function. > Press or to view setting choices for a particular function Reference Book for more information > Use the number keys to select for example about Parental Control. specific chapters. > Press EXIT to remove the on-screen tool bar. safe Child safe. The disc has been checked for offensive scenes and > Press to resume playback. deemed suitable for children. resume Playback of a disc resumes from the point where playback was previously interrupted. Action is not valid. Indicates that the function in question cannot be activated at this point in time.
17 17 The tool bar symbols Below is a list of all the symbols on the tool bar and an explanation of the functions each symbol activates. Beo4 shortcuts are also indicated. User Preferences Settings You can change settings for picture, sound, language and the Parental Control feature via this menu. Refer to the chapter, Change picture, sound or language settings, for more information about the User Preferences menu. Subtitle language* Subtitles in different languages are often available on DVDs. You can choose between the subtitle languages available on your DVD. To change subtitles during playback directly, press the green button on Beo4. Playback language* The dialogue in a DVD film may be dubbed in several different languages, all stored on the disc. You can choose between the languages available on your particular disc. To change the playback language during playback directly, press the red button on Beo4. Sound mode You can choose between the different sound modes available on your disc. Pause Pauses playback on a particular frame and allows you to move to the previous or following frames. Slow motion Allows you to slow playback down to a chosen speed. Fast motion Allows you to increase playback speed to a chosen level. Camera angle* It is possible on some DVDs to change to a different camera angle. Zoom Allows you to zoom in on a section of the picture, choose the magnification and pan back and forth. Title number You can choose between available titles on your disc. Chapter number Each chapter in a DVD film consists of one scene, much like individual tracks on an audio CD. Time search Allows you to start playback from a point in elapsed time on the disc. Favourite Track Selection (fts)* Allows you to identify favourite titles, chapters or tracks on a particular disc and store them in the player s memory. When the function is activated, you will only see or hear the selected titles, chapters or tracks on this disc when it is played back. *NOTE! If a function is inactive for your player setup, or if the disc does not contain a particular option, the function symbol and current setting will be dimmed, and it will not be possible to access the function.
18 18 >> The tool bar on the screen How to use the tool bar functions First call up the tool bar by pressing the blue button. Once the tool bar is available, refer to the below instructions. They will guide you through all the functions available on the tool bar. To change subtitle language > Press or to step between the subtitle languages available on your disc. Playback continues and subtitles change as you move between the options. To change audio language > Press or to step between the audio languages available on your disc. Playback continues and audio language changes as you move between the options. To change sound mode > Press or to step between the available sound modes. Playback continues and sound changes as you move between the options. To move between single frames > Press to pause the picture on a particular frame. > Press ss or tt to move between the previous or following frames. > Press to remove the tool bar. > Press to resume playback. To watch the film in slow motion > Press to pause the picture. > Now press ss or tt to move slowly backwards or forwards, as you press ss or tt the speed changes accordingly. If you move the cursor back to the middle position, playback continues at normal speed. > Press EXIT to remove the tool bar. > Press to resume playback. To cue forwards or backwards > Press to pause the picture. > Now press ss or tt to cue backwards or forwards, as you press ss or tt the speed changes accordingly. If you move the cursor back to the middle position, playback continues at normal speed. > Press EXIT to remove the tool bar. > Press to resume playback. To change camera angle > Press or to step between the different camera angles available on your disc. Playback continues, and the camera angle changes as you move between the options. To zoom in on a section of the picture > Press or to choose the magnification you want. > Press twice to enter your choice and be able to pan across the picture. > Press ss tt or to move to the section of the picture you want. > Press twice to see playback of the selected section. > Press the blue button to bring up the tool bar again. > Press or to set the zoom function to Off. > Press to resume playback.
19 19 To switch to a different title on the disc > Press or to step between the titles available on your disc. Playback begins automatically, or > use the number keys 0 9 to key in the number of the title you want. Playback begins automatically. To switch to a different chapter or track > Press or to step between the chapters or tracks available on your disc. Playback begins automatically, or > use the number keys 0 9 to key in the number of the chapter or track you want. Playback begins automatically. To move to a specific point in time on the disc > Press to be able to enter a time in the numeric field. If, for example, you wish to start playback one hour into a film, enter 1:00:00 in the numeric field by means of the number keys. > Press twice to move to this point in time. Select your favourite titles or chapters (fts) to be played only > Press to be able to make your selection. Playback stops and the menu illustrated to the right appears. > Press ss or tt to select On. > Press to select titles. > Press ss or tt to select the title number you want. > Press twice if you wish to store the entire title, or > press when the cursor is placed on the selected title number to move to the first available chapter number. > Press ss or tt to move between the chapters and press twice to store your selection. The title, chapters or tracks you choose will be shown besides the program field. > Press EXIT to remove the menu and press to start playback of your favourite track selection. To play the entire DVD and deactivate the Favourite Track Selection (fts) function > Press to call up the fts menu. > Press ss or tt to select Off. > Press EXIT to remove the menu and press to resume playback. no off 1 1 title chapter program On To delete a Favourite Track Selection > Press to call up the fts menu. > Press to move to program. > Press ss or tt to move to the selection you wish to delete. > Press twice to delete the selection. > Press EXIT to remove the menu and press to resume playback. To delete all Favourite Track Selections > Press to call up the fts menu. > Press to move to Clear all. > Press twice to delete all selections. > Press EXIT to remove the menu and press to resume playback. off > > [ ] Clear all Favourite Track Selection NOTE! When the memory of the BeoCenter 1 is full, the oldest Favourite Track Selection (fts) entry is removed.
20 20 Use the radio BeoCenter 1 tunes in available radio programs automatically when it is installed for the first time. Once the programs are tuned in, you can either activate the radio and step through the tuned programs, key in the number of the program you want, or you can bring the entire list up on the screen and find the desired program there. If you have created program Groups you can also call up program lists for your Groups. Listen to tuned programs To activate the built-in radio, choose RADIO as your source. The last program you listened to is switched on automatically. RADIO P TV Press to switch on the radio. The last program you listened to is switched automatically Step up or down through the available tuned programs, or key in the number of the program you want to listen to Press to see the name or number of the current program Press another source button, e.g. TV to switch to television programs Pressing 0 will swap between the current and previous radio programs. See list of all programs Choose RADIO as your source and call up a program list to get a complete overview of the available radio programs. RADIO P Press to switch on the radio Press and hold to call up the radio program list Step up or down through the available programs Press to call up the chosen program, or key in the number of the program you want to listen to Call up the program list for a specific Group RADIO Press to switch on the radio P 3 ss tt Press ss or tt repeatedly to step MY GROUP through your Groups Press to call up the chosen Group Press and hold to call up the program list for this Group ss tt Press ss or tt to see the program lists for all the other Groups NOTE! Refer to the chapter entitled Re-tune or add programs in the separate Reference book for more information about how to tune in additional programs.
21 21 RADIO PROGRAM LIST 1 P1 2 P2 3 P3 4 P4 5 STRUER 6 MVEST BBC SR1 12 SR2 13 SR VIBORG 16 NRK1 17 NRK2 18 NRK3 select The program list for radio is now called up. It provides you with an overview of all your available radio programs. P1 P2 P3 RADIO MW NRK BBC SR1 MY RADIO group select Groups list Radio programs selected for a Group also appear in the program lists for all tuned radio programs.
22 Technical specifications, features and the use thereof are subject to change without notice! Printed in Denmark by Bogtrykkergården a-s, Struer
BeoVision 6 Guide The Guide and the Reference book This Guide contains information about the daily use of your Bang & Olufsen product. The Reference book contains information about more advanced operation
BeoVision 7 Guide The Guide and the Reference book This Guide contains information about the daily use of your Bang & Olufsen product. The Reference book contains information about connecting and operating
HDR 2 Guide Contents 3 Introducing the hard disc recorder and Beo4, 4 Find out how to operate the hard disc recorder with the Beo4 remote control and bring up the menus on your television screen. Daily
BeoCenter 2 Guide Contents 3 This Guide explains how to operate your BeoCenter 2. It will guide you through the operations available for your system. All instructions regarding setting-up and the Socket
BeoVision 7 Supplement On-screen menus This supplement contains corrections to the Guide and Reference book. The main corrections refer to the Onscreen menus, the CONNECTIONS menu and the socket panels.
BeoVision 11 BeoVision 11 40 BeoVision 11 46 BeoVision 11 55 Dear Customer This guide contains additional information about your product and describes some features and functions from the Getting Started
User Guide Plaza HDR S freesat digital HD TV recorder CONGRATULATIONS on buying a Manhattan Plaza HDR S freesat receiver. This high performance unit lets you record and watch the best of digital TV and
BEOPLAY V1 BeoPlay V1 32 BeoPlay V1 40 Dear Customer This guide contains additional information about your product and describes some features and functions from the Getting Started in more detail. Among
Digital Cable TV User Guide T a b l e o f C o n T e n T s DVR and Set-Top Box Basics............... 2 Remote Playback Controls................ 4 What s on TV.......................... 6 Using the OK Button..................
CH+ CH + GUIDE POWER VOL Ñ VOL + INFO CH Ñ EXIT LIST L AUDIO R VIDEO SELECT Getting Started With the Multi-Room DVR System Multi-Room Digital Video Recording (MR-DVR) System Record all of your favorite
DVR GUIDE Using your DVR/Multi-Room DVR 1-866-WAVE-123 wavebroadband.com Table of Contents Control Live TV... 4 Playback Controls... 5 Remote Control Arrow Buttons... 5 Status Bar... 5 Pause... 6 Rewind...
2 Satellite Receiver ABOUT YOUR SATELLITE RECEIVER This chapter gives you an overview and a description of your satellite receiver. SATELLITE RECEIVER OVERVIEW SINGLE AND DUAL MODES REMOTE CONTROL SATELLITE
245U Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired.
RCN DIGITAL CABLE USERS GUIDE WELCOME Congratulations! Thanks to your new Digital Cable Service, you now have access to the most cutting-edge cable television services available, only from RCN. At RCN,
TechniSat HDFV Freesat HD Digital Receiver Owner s Manual Dear Customer, Welcome and thank you for choosing TechniSat Digital s HDFV Digital Freeview HD Receiver for your TV entertainment. This product
DVB-T VERTO HD TERRESTRIAL DIGITAL TV STB & PLAYER MT4162 User Manual EN 2 Index Index...2 Overview...2 Remote Control...3 Battery installation in remote control...4 Using remote control...4 Connections...4
DVB-T2 DIGITAL TV BOX QUALITY OF DIGITAL TELEVISION MT4159 User Manual EN 2 Index Index...2 Introduction...3 Front panel...3 Rear panel...3 Remote control...4 Hardware configuration...5 Connecting tuner
Car Multimedia System XM-2DTSB79 AUX IR MIC RESET USB INSTRUCTIONS Please read all instructions carefully before using Touch calibration If touch calibration error occurs, you can adjust the touch coordinate
Big Sandy Broadband DVR Guide Contents Big Sandy Broadband DVR Don t Miss a Thing 3 Control Live TV 3 Playback Controls Using the Video Control Buttons 4 Playback Controls Using the Remote Control Arrow
MVS - Mini Video Speaker Mini Clock Radio Night Vision Hidden Camera User Manual Spy Tec www.spytecinc.com GETTING STARTED Components Features Powering Up the Device Micro SD Memory Card for Data Storage
BEOLINK 1000 2 The Beolink 1000 remote control gives access to all the primary functions in a Bang & Olufsen system, including audio and video products and special functions such as light control. This
Sky±HD User Guide Welcome to our handy guide designed to help you get the most from your Sky±HD box. Whether you need to make sure you re set up correctly, or simply want to learn more about all the great
Using Sky±HD Welcome to the world of Sky±HD This is your essential guide to using your Sky±HD box What do you want to do? Learn about HD page 6 Get started page 10 See what s on page 16 Use your Planner
Moxi Whole Home HD DVR QUICK REFERENCE GUIDE Let s get started with learning more about what your Moxi System can do. This is a quick reference guide to get you up and running. Contents: Menu Quick Look
CABLE ONE ALL DIGITAL The world is going All Digital and so is Cable ONE. With the switch from analog to digital technology, Cable ONE will be able to add new channels, especially more HD channels, and
Hargray s Digital Television powered by Ericsson Mediaroom Hargray Digital Television powered by Ericsson Mediaroom Watch What Hargray Digital Television Service Can Do For Your Home Entertainment. Welcome
Quickstart Guide 1. The FOXTEL iq remote control FOXTEL Takes you from the TV Guide (or any FOXTEL screen) to the last channel you were watching. Takes you back to FOXTEL after you have been using AV mode
PVR Personal Video Recorder Green Area of Bar Indicates Stored or Recorded Programming Triangle Indicates Your Current Position in Program Red Area of Bar Indicates Missed Programming T11170 "Paused" Status
DVR Guide Dual Tuner HD-Capable DVR You go get the popcorn. Your show waits for you. USING YOUR REMOTE CONTROL TV: When programmed, enables control of your TV. Cable: Enables control of your digital cable
EPG Program Reservation There are 10 program timers to bring up reminder for a reserved program. 20 seconds before the start of the reserved program, a pop-up window will remind viewer. If no further instruction,
I N T R O D U C I N G B E O C E N T E R A V 5 1 BeoCenter AV5 is an audio/video system with a built-in CD player and a FM Radio. The BeoCenter AV5 delivers excellent sound and picture quality. As the speakers
19 HD Ready Digital LCD TV Instruction Manual L19DIGB10 Contents Preparation... 4 Unpacking the TV...4 Installing / Removing the Base Stand...5 Front / Top / Side View and Controls...6 Rear View and Sockets...7
Lenovo Miix 2 8 User Guide Read the safety notices and important tips in the included manuals before using your computer. Notes Before using the product, be sure to read Lenovo Safety and General Information
DIGITAL / HD GUIDE Using Your Interactive Digital / HD Guide 1-866-WAVE-123 wavebroadband.com Using Your Interactive Digital/HD Guide Wave s Digital/HD Guide unlocks a world of greater choice, convenience
Register your product and get support at www.philips.com/welcome User Manual Contents 1 Your new TV 3 1.1 EasyLink 3 2 Setting up 4 2.1 Read safety 4 2.2 TV stand and wall mounting 4 2.3 Tips on placement
Multimedia User Guide Copyright 2006 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject
Sky±HD User Guide Welcome to our handy guide designed to help you get the most from your Sky+HD box. Whether you need to make sure you re set up correctly, or simply want to learn more about all the great
VAST TV Vast is committed to providing you with quality advanced broadband services at a great value. Choose from a variety of TV packages and enjoy more entertainment with Vast OnDemand, digital music
BeoLab 5 Guide This product fulfils the conditions stated in the EEU directives 89/336 and 73/23. CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No User-serviceable parts
15 Digital Photo Frame Instructional Manual aluratek.com mnl M10054 ADMPF315F Copyright 2011 Aluratek, Inc. All Rights Reserved. Table of Contents Frame Close-up... Remote Control Close-up... Package Contents...
VHS2DVD Wizard User's Manual Table of Contents 1. Installation Instructions a. Installation Package Contents b. Installation Instructions c. Setting Up the Computer for Video Capturing i. Adjust the Screen
Quick Start Guide X3000 HD Network Media Player X3000 HD NETWORK MEDIA PLAYER POWER HANTZ + PARTNER The Upgrade Company! www.hantz.com A Get to know your HELIOS X3000 Thank you for purchasing the HELIOS
9242_4_Ch2_eng 6/11/07 9:29 AM Page 1 2 Receiver and Remote Controls ABOUT YOUR SATELLITE RECEIVER This chapter helps you get to know your remote control, which lets you use all the functions of your receiver.
SET-TOP USER GUIDE SET-TOP USER GUIDE If you have more questions about your service, go to ArmstrongOneWire.com or call Customer Support at 1.877.277.5711. Table of contents WELCOME TO ARMSTRONG TELEVISION
CINEMATE 1 SR DIGITAL HOME THEATER SPEAKER SYSTEM Operating Guide Guía del usuario Guide d utilisation Notice This equipment has been tested and found to comply with the limits for a Class B digital device,
Watching and Recording TV User Guide The only warranties for Hewlett-Packard products and services are set forth in the express statements accompanying such products and services. Nothing herein should
Getting Started With The Explorer 8300 and 8300HD DVR Record your favorite programs when you re busy Record one program and watch another Record two live programs while watching a third program you recorded
VAST TV Vast is committed to providing you with quality advanced broadband services at a great value. Choose from a variety of TV packages and enjoy more entertainment with Vast OnDemand, digital music
BeoVision Avant BeoVision Avant 55 Dear Customer This guide contains additional information about the daily use of your Bang & Olufsen product and connected equipment, and describes the features and functions
HD Digital Television Recorder User s Manual HDR-7500T The default password is 0000. Notice English Thank you for purchasing a HUMAX product. Please read this user s manual carefully to be able to safely
IPTV STB QUICK GUIDE Detailed user manual download from www.my-home-television.com Dolby Digital: Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby
Movie Maker 2 Beginning Quick Overview...3 Preparing a Folder...3 Collecting Resources...3 Pictures...4 Screen Resolution...4 Starting Windows Movie Maker...4 Which Version?...4 Windows Movie Maker 2 Window...4
Transparent Video System User s s Manual TVS-3000 TCC-6000 HD DVR CONTENTS Safety Instructions 1 Appearance 2 Remote Control Unit 4 How to Format the Hard Disk Drive 6 Inserting Smartcard 6 Receiver Connections
8 Digital Photo Frame Instructional Manual aluratek.com mnl M10126 ADMPF108F Copyright 2012 Aluratek, Inc. All Rights Reserved. Table of Contents Frame Close-up... Remote Control Close-up... Package Contents...
JBL CINEMA BASE Home Cinema 2.2 all-in-one soundbase for television OWNER S MANUAL JBL CINEMA BASE TABLE OF CONTENTS INTRODUCTION 1 DESCRIPTION AND FEATURES 1 JBL CINEMA BASE TOP PANEL CONTROLS 2 JBL CINEMA
inside i-guidetm user reference manual Copyright 2010 Rovi Corporation. All rights reserved. Rovi and the Rovi logo are trademarks of Rovi Corporation and/or its subsidiaries. This document contains confidential
BeoLab 1 User s guide Legal notice: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No User-serviceable parts inside. Refer servicing
Anti Shock CD / USB / SD Card Reader / Remote Control Player RM-CD DESCRIPTION OF CONTROLS: POWER: ON: Press Power button to switch on the power. OFF: Press and hold to switch off the power. CD / USB /
A25/CND. User s Reference Manual Welcome to i-guide. Introducing the new interactive program guide from Prevue and your cable system. i-guide TM is intuitive, intelligent and inspiring. It unlocks a world
Primare C31 Remote Control User Guide i Preface COPYRIGHT AND ACKNOWLEDGMENTS Copyright 2001 Primare Systems AB. All rights reserved. Primare Systems AB Idavägen 17D SE-352 46 Växjö Sweden The information
User s Reference Manual Welcome to i-guide. Introducing the all-new interactive program guide from TV Guide and your cable system. i-guide TM is intuitive, intelligent and inspiring. It unlocks a world
Digital Television User Guide Table of Contents THE HURONTEL HOME BUNDLE >> Finally you can receive Home Phone (with Calling Features), High Speed Fibre Optic Internet and 100% Digital TV including 1 Digital
USING YOUR SKY + Your Sky+ remote control Sky set your remote to control your Sky+ box tv set your remote to control your TV box office show Box Office programmes tv guide check out TV listings mute turn
CDVS-7000 Series Remote Software Users Guide Crest Electronics, Inc. Version 12.1005 Remote Surveillance Program The remote surveillance program enables users of the Crest 7000 series DVRs to connect remotely
DNX9210BT What Do You Want To Do? Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM. In this manual, you will learn various convenient functions of the system. GPS NAVIGATION SYSTEM INSTRUCTION
The only warranties for Hewlett-Packard products and services are set forth in the express statements accompanying such products and services. Nothing herein should be construed as constituting an additional
Multi Client (Integration) Installation and User s Guide Ver 12.10.x *All contents of this document may change without prior notice. INDEX 1. Index 01 2. Introduction 02 3. Installation 03 4. Using Multi
let us guide you Your Interactive Program Guide (IPG) will help you get the most out of all CentraCom Digital Cable has to offer. Using Your Remote Using Your Cable Set-Top Box Accessing Your IPG Menus
UNIVERSAL REMOTE CONTROL GUIDE Service provided by We Keep You Connected Your new AT6400 AllTouch Infrared (IR) Universal Remote Control (remote) is a true universal remote, functioning as four remotes
Videoconference Room Guide Technical Support Should you encounter technical problems please contact Help Desk 250-852-6800 Videoconference classrooms are equipped with two cameras and a ceiling mount LCD
SD Memory Card Recorder Instructions ver 110516.01 Contents 1. SD CARD RECORDER MAIN UNIT 3 2. REMOTE CONTROL FOR SD CARD RECORDER 4 3. TURNING ON THE RECORDER: 5 4. HOW TO RECORD: 6 5. HOW TO TAKE A PICTURE:
About AT&T U-verse What is AT&T U-verse for iphone? The AT&T U-verse for iphone is a service that provides all U-verse subscribers with the ability to view their U-verse TV Guide, manage their home DVR,
BEOLAB PENTA 2 For the UK market only: IMPORTANT! The wires in the mains lead supplied with this apparatus are coloured in accordance with the following code: BLUE: NEUTRAL BROWN: LIVE As the colours of