Case IH 04. Deutz / KHD 12. Deutz Fahr 26. Eicher 28. Fendt 31. Fiat (New Holland) 43. Ford (New Holland) 44. Güldner 47. Hanomag 48.
|
|
|
- Jessie Norton
- 7 years ago
- Views:
Transcription
1 2013
2 Tractor and trailer spare parts Contents Case IH 04 Deutz / KHD 12 Deutz Fahr 26 Eicher 28 Fendt 31 Fiat (New Holland) 43 Ford (New Holland) 44 Güldner 47 KAWE B.V. Grundelstraat HT Raalte Holland Tel Fax info@kawe.nl Hanomag 48 Holder 50 Hürlimann 50 Hürth 51 2
3 Tractor and trailer spare parts Contents JCB 51 Same 70 John Deere 52 Schlüter 71 Kramer 55 Steyr 72 Lamborghini 56 Valmet 75 Landini 56 Lanz 57 Brake shoes for trailer ADR, AL-KO, BPW / Peitz, ESFA, FAD, Nieper, Rinner, Zapp 76 MAN 59 Massey Ferguson 60 s for agriculture vehicles ADR, Bautz, BPW, Claas, Eicher, ESFA, FAD, Fahr, Fendt, Güldner, Hanomag, Holder, Hürth, John Deere, Deutz / KHD, Knott, Kramer, Lanz, MAN, M.F., Perrot, Porsche, Schlüter 82 Mercedes Benz 64 Roll lining material universal 86 Multicar 65 Porsche 66 Renault 67 3 Traktor Ersatzteile
4 Case IH HOLLAND K03016 Brake band, handbrake 168 x , 353, 383, 423, 433, 453, 533, 553, 624, 633, 654, 724, C R3 K03018 Brake band, handbrake 240 x , 383, 423, 453, 433, 533, 633, 733, C C R41 K03017 Brake band, handbrake 305 x , 743, 743XL, 744, 745, 745XL 844S, 844XL, 856XL, 955, 955XL, C R21 K03156 Brake band, handbrake 305 x 40 C C3 K03079 Brake drum R3 K03020, handbrake for 40 km/h Ø142 mm, 16 teeth Maxxum 5120, 5130, 5140, 5150, MX 80C, 90C, 100, 110, 120, 135, 150, C1 K03021 Plate Ø 148 mm C3 K03102 Actuating unit A K30009 x 30 DLD-2, D R2 K40001 Rivets 3 x 8 4 products /may undergo changes and may differ in colour, construction or form. The visual presentation of articles offers a better understanding and does not warrant liability.
5 HOLLAND Case IH Article description Tractor model K35001 set, service brake Ø 127 mm, 4 pieces + rivets DED-3, D320, D322, D324, D326, DGD-4, D430, D R93 K03003 Ø 127 mm, 127 teeth R12 K03002 Actuating unit R1 K35002 set Ø 143 mm, 4 pieces + rivets D436, D439, D440, 323, 353, 383, 423, 433, 453, 533, R R92 K03004 Ø 143 mm 41,5 mm x 10 teeth R C R R92 K03005 Actuating unit R1 K35003 Disc lining set, service brake Ø 165 mm, 4 pieces + rivets 323, 353, 383, 423, 453, 533, R R92 K03007 (lined) Ø 165 mm 41 mm x 10 teeth A R91 K03008 Actuating unit Ø 165 mm R21 K03126 Protective seal R1 5
6 Case IH HOLLAND K35004 K03010 Disc lining set Ø 178 mm, 4 pieces + rivets (lined) Ø 178 mm 41 mm x 10 teeth 523, 624, 553, 654, 724, , 533, 633, 733, 833, , 640, 740, 840, R R A R R1 K03011 (lined) Ø 178 mm 56,5 mm x 10 teeth 523, 553, 624, 654, 724, R2 K03012 Actuating unit Ø 178 mm R22 K03121 Actuating unit incl. intermediate ring Ø 178 mm R91 K35005 Disc lining set, service brake Ø 200 mm, 4 pieces + rivets 553, 554, 644, 654, 724, 743, 743XL, 744, 745S, 745XL, 824, A R91 K03014 (lined) Ø 200 mm 56,5 mm x 10 teeth A R91 K03015 Actuating unit Ø 200 mm R94 K03022 Ø 226 mm / 56,5 mm x 10 teeth oilbath, service brake 844, 844S, 844XL, 856XL, 743, 743XL, 744, 745S, 745XL R R92 K03023 Plate R2 K03024 Piston R7 K03027 Simmerring R91 6 products /may undergo changes and may differ in colour, construction or form. The visual presentation of articles offers a better understanding and does not warrant liability.
7 HOLLAND Case IH Article description Tractor model K03028 (lined) Ø 255 mm 56,5 mm x 10 teeth 955, 955XL, 956, 956XL 1055, 1055XL, 1056, 1056XL R94 K03029 Plate R2 K03030 Piston R2 K03027 Simmerring R91 K03031 (lined) Ø 222 mm, 28 teeth CS110, CS120, CS130, CS K03032 Intermediate disc Ø 227 mm K03042 (lined) Ø 305 mm mm x 18 teeth Magnum 7130, 7140, 7230, 7240, 7250 MX 150, 170,, 200, 220, 240, C2 K , 1055, 956, 1056, 956XL, 1056XL R R91 K03034 (lined) Ø 258 mm 61 mm x 15 teeth 3210, 3220, 3230, 4210, 4220, 4230, 4240, CX 70, 80, 90, C2 K03035 (lined) Ø 300 mm, 16 teeth 5120, 5130, 5140, 5150, MX100, MX110, MX120, MX135, MX80C, MX90C, MX100C A A1 7
8 Case IH HOLLAND K , 1046, R92 K03040 (lined) Ø 242 mm 60 mm x 28 teeth CS 78, 86, 94, 80, 90, K03041 Metal disc Ø 248 mm, 248 x K03033 Actuating unit K03104 (lined) Ø 242 mm 60 mm x 28 teeth CS100, 110, 120, 130, 150 CVX120, 130, 150, 170, 1135, 1145, 1155, 1170, 1190, K03041 Metal disc Ø 248 mm, 248 x K03033 Actuating unit K03052 K XL, 585XL, 685XL, 785XL, 885XL, 856XL, 3210, 3220, 3230, 4210, 4220, 4230, 4240, 5120, 5130, 5140, 5150, 5220, 5230, 5240, 5250, 743, 745, 844, 845, A R C C C C1 K , 743+S, 744, 844+S, R91 K R91 8 products /may undergo changes and may differ in colour, construction or form. The visual presentation of articles offers a better understanding and does not warrant liability.
9 HOLLAND Case IH Article description Tractor model K03057 CS 78, 86, 94, 110, 120, 130, 150, CVX 120, 130, 150, K K03114 Clutch cylinder CS110, 120, 130, K , 995, 996, 1190, 1210, 1212, 1290, 1390, 1410, 1412, 1490, 1494, 1594, 1690, 1694, 1694T (David Brown) K K04006 Slave cylinder 1190, 1290, 1390 (David Brown) K K04008 Slave cylinder 1490, 1494, 1594, 1690, 1694, 1694T (David Brown) K K03064 Wheel brake cylinder 22 mm pressure reservoir slot 946, 1046, R91 K Wheel brake cylinder 22 mm pressure reservoir round R91 K03065 K45001 Brake shoe, hand brake 250 x C1 K45003 Brake shoe, service brake 250 x R2 K x 5 x 270, 14 holes R2 K03080 Brake drum hand brake 250 x 30 service brake 250 x R1 9
10 Case IH HOLLAND K03062 Wheel brake cylinder 38 mm 1255, 1255XL, 1455, 1455XL R1 K03063 K45005 Brake shoe, service brake 270 x C1 K03069, service brake R1 K45001 Brake shoe, hand brake 250 x C1 K45002 Brake shoe, hand brake 250 x C1 K03071, hand brake R1 K30008, hand brake 250 x R1 K03078 Brake drum hand brake 250 x service brake 270 x R1 K30075 Disc lining set width 44 mm, 4 pieces + rivets 770, 850, 885, 95, 990 (David Brown) K K30076 Disc lining set width 63 mm, 4 pieces + rivets 990, 995, 996, 1190, 1194, 1290, 1390 (David Brown) K K30077 Disc lining set width 89 mm, 4 pieces + rivets 3 rivet lines 1200, 1210, 1212, 1390, 1490 (David Brown) K products /may undergo changes and may differ in colour, construction or form. The visual presentation of articles offers a better understanding and does not warrant liability.
11 HOLLAND Case IH Article description Tractor model K03075 Brake caliper Ø 54 mm, thickness 12 mm C1 K03076 Brake caliper Ø 54 mm, thickness 24 mm C1 K03074, brake caliper mineral oil R91 K03077 Montageset, brake caliper K50001 Brake pad set, 2 pcs 78 x 66 x 15, disc thickness 12 mm C1 K50002 Brake pad set, 2 pcs 98 x 68 x 15, disc thickness 24 mm C1 K03116 for cardan shaft thickness 12 mm R1 K03117 for cardan shaft thickness 24 mm C1 11
12 Deutz KHD HOLLAND K35006 Disc lining set 152 x 79 x 5, 4 pieces + rivets DX 145, K06002 (lined) Ø 152 mm, 24 teeth K06003 Actuating unit K06004 Actuation cylinder K35007 Disc lining set (disc brake) Ø 228 x 150 x 4,7 4 pieces + rivets 3006, 4006, 4506, 5006, 5206, 5506, 6206, 4007, 4807, 5207, 5207C, 6007, 6007C, 6207, 6207C, 6507, 6507C, 6907, 6907C, Intrac 2002, DX140, 145, DX SC+VC K06006 (lined) Ø 228 mm 69 mm x 32 teeth 4006, 4505, 4506, 5006, 5206, 5506, 5206, 4007, 5207, 6007, 6207, 6507, 6907, 6007C, 6207C, 6507C, Intrac 2002, DX140, 145, 3.10SC, 3.30SC K06007 (lined) Ø 228 mm 76 mm x 36 teeth 2506, 3006, 4006, 4505, 4506, 5006, 5206, 5506, 6206, 4007, 4807, 5207, 5207C, 6007, 6007C, 6207, 6207C, 6507C, 6907C, DX3.10SC, DX3.30SC, DX3.50SC, DX3.10VC tot 3.90VC K06008 K06009 Actuating unit Ø 228 mm Sealing ring 62 x 100 x 20, , 4006, 4506, 5006, 5206, 5506, 6206, 4007, 4807, 5207, 5207C, 6007, 6007C, 6207, 6207C, 6507, 6507C, 6907, 6907C, Intrac 2002, DX140, 145, DX SC+VC K06010 Sealing ring 68 x 100 x K06011 Bushing 62 x 68 x
13 HOLLAND Deutz KHD Article description Tractor model K06012 K06014 Ø 225 mm 60 mm x 28 teeth Knott Intermediate disc Knott Agrotron 4.70, 4.80, 4.85, 4.90, 4.95, 6.00, 6.01, 6.05, 6.15, 6.20, 6.30, 6.45, 80, 85, 90, 100, 105, 106, 110, 120, 135, 150 Knott version to MY K06016 Actuating unit Knott K06022 Spare part set Knott actuating unit with 5+4 discs K06018 Actuation cylinder Knott K06020 Actuation cylinder Sirmac (only reconditioning) K06027 Ø 20 mm D6807, 7206, 7807, 8707 DX145, 160, K06028 Ø 20 mm K06029 Ø 22 mm K06030 Ø 22 mm K06038 Ø 23 mm Agrotron 4.70, 4.80, 4.85, 4.90, 4.95, 6.00, 6.01, 6.05, 6.15, 6.20, 6.30, 6.45, 80, 85, 90, 100, 105, 106, 110, 120, 135, 150, 230,
14 Deutz KHD HOLLAND K06031 Ø 15 mm 6008, 10008, 8006, 9006, without bore for stoplight switch K06032 Ø 15 mm - with bore + stoplight switch K K06034 Ø 19 mm, for drum brake D6807C, 7207 DX3.70SC, 3.90SC, DX4.10, 4.30, K K06036 K06177 Ø 17 mm DX3.10, 3.30, 3.50, 3.65 SC, DX4.17 Hopfen AgroXtra 3.57, 4.07, K06037 K06035 Ø 19 mm, for disc brake DX SC, DX VC, DX4.10,4.30, 4.50, 4.70, DX6.05, DX6.10, 6.30, DX4.57 Hopfen, AgroPrima 4.31, 4.51, 4.56, AgroXtra 4.47, K06039 K06040 Ø 22 mm DX3SC+VC, SC, DX VC, DX , DX , Hopfen DX4.57, Agro Prima , 6.06, 6.16, AgroXtra 4.47, 4.57, 6.07,
15 HOLLAND Deutz KHD Article description Tractor model K06041 K06042 Ø 20 mm AgroStar , AgroStar Freisicht 4.68, 4.78, 6.08, 6.28, K06045 Ø 19 mm DX85, DX90, DX110, DX K06046 K06043 K06042 Ø 20 mm DX SC, DX VC, DX7.10, DX4.17, DX4.57Hopfen, AgroPrima , 6.06, 6.16, AgroStar , , AgroStar Freisicht , , AgroXtra , K06176 Ø 17 mm DX3.10V, 3.30V/F/S, 3.70V/F, 3.90F/S AgroCompact 3.30V/F, 3.50V/F, 3.90S K K06178 Agrotron 80, 90, 100, 105, 110, 108, 118, 120, 128, 130, 140, 150, 150.7, 155, 165, 165.7, 106MK3, 110MK3, 115MK3, 120MK3, 135MK3, 150MK3, 165MK K06044 Clutch master cylinder DX K06049 Clutch master cylinder (at pedal) Ø 25 mm K
16 Deutz KHD HOLLAND K06053 Clutch master cylinder (at pedal) Ø 25,4 mm K06054 Clutch master cylinder, mineral oil Ø 22 mm Agrotron 4.70, 4.80, 4.90, 4.95, 6.00, 6.05, 6.15, 6.20, 6.30, 6.45, 80, 85, 90, 100, 105, 106, 110, 120, 135, K06055 Clutch master cylinder Ø 19 mm Intrac K06056 Wheel brake cylinder for drum brake rear Ø 22 mm D8006, D9005, D9006, D10006, D K06057 Wheel brake cylinder for drum brake front Ø 25 mm DX3.10, 3.30, 3.50, 3.60, 3.65, SC, DX3.10, 3.30, 3.50, 3.60, 3.65, VC, AgroXtra 3.57, 4.07, 4.17, K06058 K06059 Wheel brake cylinder Duplex Ø 28 mm Intrac 2004 AgroCompact 3.30V/F DX3.10SC, DX3.10V/F/S K06060 Wheel brake cylinder Ø 31 mm Intrac 2002, K06061 K06062 Wheel brake cylinder Ø 25 mm K
17 HOLLAND Deutz KHD Article description Tractor model K06065 K06066 Wheel brake cylinder Ø 38 mm, double brake rear FTE version DX 3.70, SC, DX 3.70, VC, DX4.10, 4.30, 4.50, DX4.47 Hopfen AgroPrima 4.31, 4.51, 4.56 AgroXtra 4.47, K06066-A ATE version K06067 K06068 Brake caliper left up Knott Ø 60mm Brake caliper right up Knott Ø 60mm service brake: DX85, 90, 92, 110, 120, DX230 DX4.70, 6.05, 6.10, 6.30, 6.50 AgroStar 4.61, 4.71, 6.11, 6.21, 6.31 AgroXtra 4.47, 4.57, 6.07, K06069 Brake caliper left down Knott Ø 60mm K06070 Brake caliper right down Knott Ø 60mm K06082 without pistons Knott version K06084 with pistons K K06072 Brake caliper Knott Ø 60 mm propshaft: AgroPrima 6.06, 6.16 AgroStar 4.61, 4.71, 6.11, 6.21, 6.31, 6.61, AgroXtra 6.07, K06071 K06192 Brake caliper 2 pistons ATE Ø 54 mm without pistons propshaft: Intrac 2004, AgroPrima 4.31, 4.51, 4.56, AgroXtra 3.57, 4.07, 4.17, 4.47, 4.57, DX3.10, 3.30, 3.50, 3.60, 3.65, 3.70, 3.90 SC+VC, DX4.10, 4.30, 4.50, K06192-K with pistons 17
18 Deutz KHD HOLLAND K06184 K06185 Brake caliper left up Brake caliper right up service brake: DX85, 90, 92, 110, 120, 4.70, 6.05, 6.10, 6.30, 6.50, K06186 Brake caliper left down K06187 Brake caliper right down K06188 without pistons K06084 with pistons K06073 K06080 K Brake caliper Ø 60 mm, ATE, FTE Brake caliper FTE version ATE version (white) servicebrake rear: DX3.10SC+VC+V/F/S, DX3.10SC DX3.30SC, DX3.50S+SC, DX3.60SC, DX3.65SC, DX3.65VC, DX3.70V/F, DX3.80SC, DX3.90S+F, DX6.50, DX4.17Hopfen, AgroXtra 3.57, 4.07, 4.17, AgroCompact 3.50S, 3.70V/F, 3.90F/S K06078 K06191 Brake caliper 4 pistons, Knott Ø 40 mm without pistons propshaft: AgroPrima 4.31, 4.51, 4.56 AgroXtra 3.57, 4.07, 4.17, 4.47, 4.57 DX3.10, 3.30, 3.50, 3.60, 3.65 SC+VC K06085 with pistons 18 K06087 K06088 Brake fluid tank 2 connections Cover Agro Prima 4.31, 4.51, 4.56, 6.06, 6.16, Agro Xtra 3.57, 4.07, 4.17, 4.47, 4.57, 6.07, 6.17, D , D , D , D , DX 3.10, DX 3.30, DX 3.50, DX 3.60, DX 3.65, DX 3.70, DX 3.80, DX 3.90 Hopfen DX 4.17, DX
19 HOLLAND Deutz KHD Article description Tractor model K50003 Brake pad set, 2 pcs cardan shaft, 77 x 18,5 x 70 DX80-86, DX VC, DX SC, DX , DX6.05, Intrac 2004, Agro Prima 4.51, Agro Compact 3.30V/F, 3.50S, 3.50V/F, 3.90F+S K Brake pad set, 4 pcs cardan shaft + service brake 90 x 15 x 74 Agrotron 4.70, 4.80, 4.85, 4.90, 4.95, Agrotron 6.00, 6.05, 6.15, 6.20, 6.30, 6.45, DX85, DX90, DX92, DX110, DX120, 4.70, 6.10, 6.30, DX K50005 Brake pad set, 2 pcs cardan shaft Knott 90 x 19 x 70 DX , DX4.70 AgroXtra 3.57, 4.07, 4.17, 4.47, 4.57, AgroPrima 4.31, 4.51, K50006 Brake pad set, 2 pcs cardan shaft ATE 90 x 15 x 70 DX AgroXtra 3.57, 4.07, 4.17, 4.47, 4.57 AgroPrima 4.31, 4.51, K50007 Brake pad set, 2 pcs cardan shaft + service brake 90 x 15 x 70 Agrostar 4.61, 4.68, 4.71, 4.78, 6.07, 6.08, , , Agroprima 6.06, 6.16, AgroXtra 6.07, 6.17 cardan shaft: Agroprima , 5.56 AgroXtra , DX140, K50008 Brake pad set, 2 pcs cardan shaft 90 x 15 x 70 AgroCompact 3.30V+F, 3.50V+F 3.60V+F K50009 Brake pad set, 2 pcs cardan shaft 98 x 15 x 68 Intrac 6.05, 6.30,
20 Deutz KHD HOLLAND K50010 Brake pad set, 8 pcs service brake DX145, DX K50011 Brake pad set, 8 pcs service brake AgroXtra 3.57, 4.07, 4.17, DX3.10, 3.30, 3.50, 3.60, 3.65, 3.70, 3.80, 3.90 SC+V+V/F AgroPrima K x 13 / 8 holes Intrac K x 13 / 6 holes cardan shaft DX3.10, 3.30, 3.50, 3.60, 3.65 SC-VC Hopfen DX4.17, 4.57 Agro Prima 4.31, 4.51, 4.56 AgroXtra 3.57, 4.07, 4.17, 4.47, K x 13 / 6 holes cardan shaft DX3.70, 3.90 SC DX3.10, 3.30, 3.50, 3.70, 3.90 VC DX4.10, 4.30, 4.50, 4.70, DX6.05, DX K x 22 / 8 holes cardan shaft DX6.10, 6.30, 6.50, AgroPrima 6.06, 6.16, AgroStar Freis. 4.68, 4.71, AgroStar 4.61, 4.71, 6.11, 6.2, AgroXtra 6.07, K x 22 / 8 holes cardan shaft DX6.10, 6.30, 6.50 AgroStar K06221 Ø 425 mm, 36 teeth AgroXtra 3.57, 4.07, 4.17; DX3.10, DX3.30, DX3.50, DX3.60, 65, 70, 80, 90; Hopfen DX4.17, AgroCompact 3.50S, 3.90S
21 HOLLAND Deutz KHD Article description Tractor model K drum total height 175 mm x 60 / 24 teeth AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16 AgroStar 4.61, 4.71, 6.11, , AgroStar Freisicht , , AgroXtra 4.47, 4.57, , DX K drum total height 194 mm x 60 / 24 teeth DX , DX4.70, DX , Intrac K06106 Brake drum hand brake x 30 service brake 250 x , 6805, 6807, 7006, 7206, 7207, 7007, 7807, DX3.70, DX3.90VL, DX3.90VC K06197 Brake drum x 30 / 8 teeth height 65 mm, toothing 38/32 D casting no K06198 Brake drum x , 8006, K06107 Brake drum 254 x 68 x 40 DX SC+VC, DX , DX4.57 Hopfen, AgroPrima , AgroXtra 4.47, K06108 K drum left + drum right Hopfen DX4.57 AgroPrima , 6.06 AgroStar Freisicht 4.68, 4.71 AgroStar , AgroXtra ,
22 Deutz KHD HOLLAND K45006 Brake shoe, compl. x 30 hand brake DX VC AgroCompact 3.30V+F, 3.50V Intrac K06112 Brake shoe, compl. x 30 hand brake D15, D15.1, D25, D30, D40, D50 S, D80, D2505, D2506, D3005, D3006, D4005, D4006, D4506, D5005, D5006, D5206, D5505, D5506, D6206, F2L 514, Intrac K45007 Brake shoe, compl. x 40 hand brake D C, 6907C, 7007C, 7207C, 7807C, DX80-86, DX3.70SC, DX , with hydr. brake: 7007, 7207, 7807, DX VC DX K45008 K06115 Brake shoe, compl. x 60 hand brake Pull spring DX85, 90, 92, 110, 120, DX , DX SC+SV, DX4.70, DX6.05, 6.10, 6.30, Intrac 6.30, 6.60 Agro Prima Agro Xtra , AgroStar , , K45001 Brake shoe, compl. 250 x 30 hand brake D 8006, 10006, K45002 Brake shoe, compl. 250 x 40 hand brake K45125 Brake shoe, compl. 250 x 60 service brake DX3.10SC+VC, 3.30SC+VC, DX3.50SC+VC, 3.60SC+VC, DX3.65SC+VC, AgroPrima 4.31, K45009 Brake shoe, compl. 254 x 70 service brake 6806, 6807+C, 7007+C, 7206, 7007, 7207+C, 7807+C, DX80+86, DX VC, DX4.10, 4.30, 4.31, 4.50, 4.51, Hopfen DX4.57, AgroPrima 4.31, 4.51, 4.56,
23 HOLLAND Deutz KHD Article description Tractor model K45010 Brake shoe, compl. 250 x 70 service brake 6006, 6807, 7006, 7206, 6807, 7007, 7207, 7807, DX VC K45011 Brake shoe, compl. 300 x 50 service brake 2506, 3006, K45012 Brake shoe, compl. 350 x 60 service brake 2807, 3006, 3607, 4006, 4007, 4506, 4507+C, 4807+C, 5006, 5506, K45013 K45014 Brake shoe left 75 x 5 x 250 Brake shoe right 75 x 5 x 250 Intrac 2002 without All-wheel drive (rigid axle) K30018 K40007, brake band 45 x 6 x 115 / 4 holes Rivets 5 x 12 D11, D15, D25, D30, D40, D2505, D3005, motortype F1M 414, F1L 514, F2L 612, F2L 712 1cylinder, ZD L K30009 K40001 K30010 K x 4 x 188 / 7 holes Rivets 3 x 8 30 x 4 x 188 / 7 holes Rivets 4 x 8 D15, D15.1, D25, D30, D40, D50S, D80, D2505, D2506, D3005, D3006, D4005, D4006, D4506, D5005, D5006, D5206, D5505, D5506, D6206, F2L 514, Intrac K30012 K x 4 x 188 / 10 holes Rivets 3 x 8 D12, D15, D17, D19, D22, D25, D66, D88, D90, D130, D150, D160, D, D270, D400 drum size x 30 K30013 K x 4 x 188 / 10 holes Rivets 4 x 8 23
24 Deutz KHD HOLLAND K30014 K x 5 x 188 / 10 holes Rivets 3 x , 3006, 4006, 4506, 5006, 5206, 5506, 6006, 6206, 6806, 7006, , 9006, 10006, 13006, 2807, 3607, 4007, 4507, 4807, 5207, 6007+C, 6207+C, 6507+C, 6807, 6907+C drum size x 30 K30052 K x 5 x 188 / 10 holes Rivets 3 x 8 D C, DX , DX3.70SC, DX3.90, DX , with hydr. brake: 7007, 7207, 7807, DX , DX3.70, DX90VC,DX drum size x 40 K30037 K x 5 x 188 / 10 holes Rivets 4 x 8 DX , DX VC+SC, Intrac , DX4.70, DX , Agrostar , , AgroXtra 3.57, H, 4.57H, 6.07, drum size x 60 K30008 K x 5 x 272 / 10 holes Rivets 4 x 10 Service brake: D15, D5505, D5015, F 4 L 812 Hand brake: F 1 L 612/4, F 1 L 712, F 2 M 417, D40, D4005, F 3 L 514/54, F 3 L 712, D50, D8005, F 6 L 812, D7506, D9006 drum size 250x40 K30048 K40006, service brake 60 x 5 x 272 / 14 holes Rivets 5 x , 8006, 9005, 9006, 10006, drum size 250x60 K30047 K40004, service brake 70 x 5 x 272 / 16 holes Rivets 4 x 10 D6006, D6806, D7006, D7206 only mech. brake: D6807, D7007, D7207, D drum size 250x70 K30053 K40006, service brake 70 x 7 x 207 / 12 holes Rivets 5 x 10 D6807C, D7007+C, D7207+C, D7807+C, DX80-86, DX VC DX drum size 254x70 24
25 HOLLAND Deutz KHD Article description Tractor model K30093 K40007, service brake 60 x 6 x 330 / 12 holes Rivets 5 x 12 Intrac 2002, drum size 300x60 K30025 K30023 K40006 short 50 x 6 x 290 / 14 holes long 50 x 6 x 327 / 16 holes Rivets 5 x 10 D , 2506, 3005, 3006, 3607, 4005, 4006, 4506, 5005, 5006, 5206, 5505, 6206, drum size 300x50 K30041 K30042 K40010 short 60 x 7 x 335 / 14 holes long 60 x 7 x 380 / 16 holes Rivets 6 x 12 D50, 2807, 3006, 3607, 4006, 4007, 4506, 4507+C 4807+C, 5207C, 5006, 5506, 6206 Intrac 2002, 2003, drum size 350x60 K30059, service brake 75 x 5 x 270 / 12 holes Intrac 2002 without All-wheel drive K30044 long 60 x 6 x 382 / 16 holes F2L514/53/3,4/6 drum size 350x60 K40004 Rivets 4 x 10 K30031 K30030 short 60 x 8 x 324 / 12 holes long 60 x 8 x 435 / 16 holes F2L514/53/3,4/6 F 2 M 417 F 3 L 514 / 6 / 7 drum size 400x60 K40007 Rivets 5 x 12 K30034 K30045 short 80 x 8 x 324 / 12 holes long 80 x 8 x 440 / 16 holes D40, D4005, D50 F 3 L 712, F 3 L 514/54 F 4 L 712 F 4 L 514 / 4 / 5 drum size 400x80 K40015 Rivets 5 x 20 25
26 Deutz KHD HOLLAND K06155 Clutch cable 1250 mm Serie "07" DX , Agroprima , 6.06, 6.16, AgroXtra 3.57, 4.07, 4.17, 4.47, , 6.17, Agrocompact 3.30V/F, 3.50S, 3.50V/F, 3.70V/F, 3.90F, 3.90S K06156 Clutch cable 620 mm DX4.10, 4.30, 4.50, 4.70 DX6.05, 6.10, Deutz Fahr K06168 (lined) Ø 102 mm, 18 teeth combine K06169 (lined) Ø 102 mm, 20 teeth combine K06170 Actuating unit Ø 102 mm K06044 K06171 combine K06044 Clutch cylinder combine K
27 HOLLAND Deutz Fahr Article description Tractor model K30009 K x 4 x 188 / 7 holes Rivets 3 x 8 Service brake: D12, 15, 17, 19, 22, 66, 88, 90, 130, GT130 Hand brake: D22, 25, 150, 160,, 270, 400 K30044 K40004 long 60 x 6 x 382 / 16 holes Rivets 4 x 10 Service brake D22, 25, 150, 160,, 270 tot bj. 58 D400 B from MY 58 drum size 350x60 K30031 K30030 short 60 x 8 x 324 / 12 holes long 60 x 8 x 435 / 16 holes Service brake D30, D270 from MY 58 D42, D45, D400 A, B, C, L, Z drum size 400x60 K40007 Rivets 5 x 12 K30034 short 80 x 8 x 324 / 12 holes Service brake D55, D60, D540 drum size 400x80 K30045 long 80 x 8 x 435 / 16 holes K40015 Rivets 5 x 20 K30020 K30022 short 50 x 6 x 248 / 12 holes long 50 x 6 x 327 / 16 holes Hand brake D30, D270 from MY 58 D42, D45, D55, D60, D540, D400 drum size 300x50 K40005 Rivets 4 x 12 K06174 Spiral spring left K06175 Spiral spring right
28 Eicher HOLLAND K35004 Disc lining set Ø 178 mm, 4 pieces + rivets Mammut K07001 (lined) Ø 178 mm, 27 teeth K07002 Actuating unit Ø 178 mm K07003 Wheel brake cylinder Ø 28 mm 3256 K50001 Brake pad set, 2 pcs K07011 Brake band compl. 210 x 70 Eicher 16 K30033 for brake band (2 pcs per band) 70 x 5 x 210 / 10 holes K40006 Rivets 5 x 10 K x 6 x 345 / 12 holes / service brake K15049 Brake shoe, compl. service brake K x 6 x 345 / 12 holes / hand brake K15050 Brake shoe, compl. hand brake 28
29 HOLLAND Eicher Article description Tractor model K30002 K x 4 x 200 / 8 holes Rivets 3 x 8 ED110, ED115, EM295, EKL15, ES200, ES201, ES202, G25, G160, G200 drum x20 K30009 K x 4 x 188 / 7 holes Rivets 3 x 8 EA400, EA600, ED13, 16, 22, 25, 26, ED30, 33, (ED215, ED310, ED500 from Ch ) L18, 28, G160, 200, 280, ES200, EKL15, LH12, G13, G30, EM100, 200, 235, 295, 300, 500, 600, ES400, HD22, K25 drum x30 K30006 K x 4,5 x 190 / 7 holes Rivets 3 x 8 ED 110/8, ED 115/8, EM 200 Tiger, EM 235, Panther ES 202, G 25, G 30, G 280 drum x40 K30027 K x 4,5 x 170 / 8 holes Rivets 4 x 8 drum x50 K30026 K x 5 x 190 / 10 holes Rivets 4 x 10 EM 200 Tiger, EM 295, EM 300, EA 400, ES 400, G 40, G 25 drum 200x50 K30008 K x 5 x 270 / 10 holes Rivets 4 x 10 EA 600, EKL 11, 11/1, 15/II, ED 215 / 16, ED 500, ED 310 Mammut, EM 500 Mammut, 504, EM 600 Mammut 604 / All-wheel Drive drum 250x40 K30022 K30021 long 50 x 6 x 330 / 16 holes short 50 x 6 x 235 / 12 holes ED16, ED22, HD22, ED25, ED26, ED210/10, ED40, ED42, ED50, ED 60, L40, L60 drum 300x50 K40004 Rivets 4 x 10 K30044 K x 6 x 380 / 16 holes Rivets 4 x 10 All-wheel Drive drum 350x60 29
30 Eicher HOLLAND K30030 long 60 x 8 x 435 / 16 holes ED 40, ED 42, ED 50 ED 50/1, L40 drum 400x60 K30031 short 60 x 8 x 325 / 12 holes K40007 Rivets 5 x 12 K x 8 x 440 / 16 holes L 60, L 60 S, ED 60 drum 400x80 K40015 Rivets 5 x 20 Fendt Spare part set 7 discs, 6 plates, 7 rings G K35008 Disc lining set 101 x 51 x 4,8 4 pieces + rivets GT231, GTW231, GT250 K08002 (lined) Ø 101 mm 40 mm x 20 teeth H K08003 Actuating unit F
31 HOLLAND Fendt Article description Tractor model K45015 Brake band, left width 25 mm Farmer 2, 2E+D+DE, 4S, 5S G K45016 Brake band, right width 25 mm G K45017 K45018 Brake band, left width 30 mm Brake band, right width 30 mm Farmer 102, 103, 104, 105, 106, 107, S+LS+LSA, Farmer 200, 201, 202, 203, 204, 205 GT255, GT275 Farmer 4S, 5S H H K35003 K08006 Disc lining set 165 x 89 x 4,8 (lined) Ø 165 mm 45 mm x 22 teeth 4S, 5S, Farmer 102, 103, 104, 105 S+LS,105LSA, 106, 108, S+LS, 305LS, 305LSA, 306, 307, 308, 309, 310, 311, 312 LS+LSA, GT275, 380, 390, 395, 509C, 510C, 511C, 512C, 514C, 515C Xylon 520, 522, 524 F F F K08007 Actuating unit thickness 33 mm Farmer 100-Serie F K08009 Actuating unit thickness 57 mm Farmer 300-Serie, 500-Serie E K08119 Ø 223 mm 75 mm x 36 teeth Farmer 409, 410, 411, 412 Favorit 711, 712, 714, 716, 816, 818, 822, 824, 916, 920, 924, 926 F K08120 Intermediate disc
32 Fendt HOLLAND K08015 Actuation cylinder Ø 22 mm 105, 106, 108S -LS-LSA F275GT X K08016 X K08017 K08018 Actuation cylinder Farmer: Favorite: GT Xylon 520, 522, 524 G F K08019 Actuation cylinder Farmer 310, 311 F380GT G K08020 G K08021 K08022 Wheel brake cylinder Ø 31 mm 200, 240S, 250S+LE+VA 260VA+PA, 270PA, 275VA, 280PA, 303, 304, 305, 307, F275, 345, 360, 365GT G F K08023 Wheel brake cylinder Ø 31 mm Favorit 612, GT250 F K08024 Wheel brake cylinder Ø 31 mm 260S, 275S, 280S G K08025 Wheel brake cylinder Ø 22 brake 250 x 60 Favorit LSA F K08026 F K08027 Wheel brake cylinder Ø 38 brake 270 x 80 F K08028 F
33 HOLLAND Fendt Article description Tractor model K08029 Wheel brake cylinder, right Ø 31 mm 260VA+PA, 270PA, 275VA, 280PA, 303, 304, 305, 306, 307, 309, GT380 F K08030 Wheel brake cylinder, left Ø 31 mm F K08031 F K08032 Wheel brake cylinder, right Ø 28 mm F K08033 Wheel brake cylinder, left Ø 28 mm F K08034 F K08035 Ø 15 mm, Girling Farmer 105S+LS+LSA, 106S+LSA Farmer 108S+LS+LSA X K08036 X K08037 K08038 Ø 15 mm, Girling Farmer 240S, 250S+LE+VA, 260VA+PA+S, 270PA, 275VA 275S, 280PA Farmer 303, 304, 305, 307 G F K08039 K08040 K08041 Ø 19 mm, Girling Ø 22 mm Farmer 240S, 250S, 250LE+VA, 260VA+PA+S, 270PA, 275VA, 275S, 280PA, 303, 304, 305, 306, 307, 308, 309, 310, 311 F345GT, F350GT, F360GT, F370GT G casting-no. at cylinder 22mm K08042, Girling
34 Fendt HOLLAND K08043 Ø 22 mm Farmer 306, 307, 308, 309, 310, 311, 312, F370, 380, 390, 395GT G K08044 F K08045 K08044 Ø 22 mm Farmer 308, 309, 310, 311, 312 from no. 312/21 Farmer 500 Serie Xylon 520, 522, 524 G F K08046 K08047, mineral oil Ø 22 mm Farmer 409, 410, 411, 412, Xylon 520, 522, 524, 711, 712, 714, 716, 718, 815, 816, 817, 818, 820, 822, 824, 916, 920, 924, 926, 930 G F K08048 Ø 19 mm F275GT G K08049 K08051 Ø 19 mm Favorit 600, 610, 611, 612, 614, 615, 282 S F K08052 Ø 22 mm F K08054 K08132 Clutch master cylinder Ø 20 mm 303, 304, 305, 306, 307, 308, 309, 310, 311, 312 F345, 350, 360, 365, 370, 380, 390, 395GT G F K S, 10S, 11S, 12S, 610S, 611S, 612S, 614S F
35 HOLLAND Fendt Article description Tractor model K08055 Clutch master cylinder Ø 20 mm 308, 309, 310, 311, 312 from chassisno.: FW G K08132 F K08056 Clutch master cylinder Ø 22 mm Favorit G K08133 F K08057 K08123 Clutch master cylinder Ø 23 mm 600LS, 610S+LSA, 611S+LSA 612SA+LSA, 614LSA, 615LSA from chassisno.: FW G F K08060 K08126 Clutch slave cylinder Ø 38 mm with piston 303, 304, 305, 306, 307, 308, 309, 310, 311, LS, 610S+LSA, 611S+LSA 612SA+LSA, 614LSA, 615LSA G F K08127 without piston F K08061 Clutch slave cylinder Ø 38 mm 611, 612, 614, 615 LSA from chassisno.: FWA G K08128 F K08062 Clutch slave cylinder Ø 38 mm F345, 360, 365, 380, 390, 395GT G
36 Fendt HOLLAND K50013 Brake pad set, 2 pcs 90 x 15 x 71 mm cardan brake Farmer , Favorit , Farmer 240, 250, 260, 270, 275, GT 365, 380, 390, 395 Xylon 520, 522, 524 F F K50001 Brake pad set, 2 pcs 78,5 x 66 x 15 mm cardan brake Favorit 600LS, 610LS, 611LS, 612LS, 614LS, 615LS F K50009 Brake pad set, 2 pcs 98 x 68 x 15 mm incl. wear warning contact Favorit 611LSA, 612LSA, 614LSA, 615LSA F K50002 Brake pad set, 2 pcs 98 x 68 x 15 mm excl. wear warning contact F K08129 Accessories set K08068 Brake caliper disc thickness 22 mm Farmer 303, 304, 305, 306, 307, 308, 309, 310, 311 -LSA 380GTA G K08069 without pistons F K08070 with pistons K08071 Brake caliper disc thickness 31 mm Farmer 307, 308, 309, 310, 311, 312LSA Favorit 500, 510, 511, 512, 514, 515 G K08069 F
37 HOLLAND Fendt Article description Tractor model K mm / 6 holes / 31 mm Farmer 307, 308, 309, 310, 311, 312 LSA Favorit 509, 510, 511, 512, 514, 515 GT 365, 370, 380, 390, K mm / 6 holes / 22 mm K mm / 8 holes / 22 mm Farmer 309LSA, 310LSA, 311LSA GT365, GT K mm / 22 mm K mm / 8 holes / 31 mm K mm / 8 holes / thickness 13 mm Farmer 303LSA, 304LSA, 305LSA 306LSA, 308LSA, 309LSA K mm / 8 holes / thickness 13 mm Favorit K mm / 6 holes / thickness 40 mm Favorit K08078 Brake drum Farmer 2, 2E, 2D, 2DE F
38 Fendt HOLLAND K08079 Brake drum Farmer 2S, 3S, 4S, 102S+LS, 103S+LS, 104S+LS, 200S+V, 201S, 203P, 204P+V F F K08130 Brake drum 5S, 105, 106, K08080 Brake drum hand brake 250 x 30/40 service brake 250 x 60/70 Favorit 610, 611, 612, 614, 615 LS+LSA F K08081 Brake drum hand brake 250 x 30/40 service brake 270 x 80 F K30009 hand brake 30 x 4 x holes Farmer 1 GT220, 225, 230, 231 F K30001, brake band hand brake 20 x 4 x holes Farmer 2, 2E, 2D, 2DE K30064, brake band hand brake 30 x 4 x 190 Farmer 102, 103, 104, 105, 106, 107, S+LS+LSA, Farmer 200, 201, 202, 203, 204, 205, GT255, GT275, Farmer 4S, 5S K x 5 x holes Favorit 1, 2, 3 K30027 service brake 50 x 4 x holes Farmer 2, 2S F
39 HOLLAND Fendt Article description Tractor model K30037 service brake 60 x 5 x 187 / 10 holes Farmer 240, 250, 260, 270, 280S+V+P, 303, 304, 305, 307 LS+LSA GT345, 360, 365, 2-4S 102, 103, 104, 105, S+LS, 200, 201, 203, 204, 205, V+S+P, GT K30048 service brake 60 x 5 x 272 / 14 holes Favorit K30022 long 50 x 6 x 327 / 16 holes Farmer 1, Dieselross 12, 15, 17, 18, 20, 22, 24, GT220, 225, 230, 231 F K30021 short 50 x 6 x 288 / 14 holes F K30044 long 60 x 6 x 370 / 16 holes Dieselross 25, 28, FW243 K30035 short 60 x 6 x 287 / 12 holes K30030 long 60 x 8 x 435 / 16 holes F 40 K30031 short 60 x 8 x 324 / 12 holes K x 5 x 260 / 12 holes 240S, 250S, 260P, 270P, 275S, 280P Farmer 303, 304, 305, 306, 307, 308, 309, 310, 311 F345, 350, 360, 370, 380 GT K45019 K08131 Brake shoe, compl. hand brake x 30 Pull spring Farmer1, 240, 250, 260, 270, 275 S+P+V 303, 304, 305, 306, 307, 308, 309, 310, 311 LS+LSA, GT220, 225, 230, 231, 260, 360, 365, 380, 390, 395, 509, 510, 511, 512, 514, 515 H F
40 Fendt HOLLAND K45007 K08131 Brake shoe, compl. hand brake x 40 Pull spring Farmer 309, 310, 311, 312 LS + LSA Favorit 509, 510, 511, 512, 514, 515C, GT 370, 380, 390, 395 H F K45008 K08131 Brake shoe, compl. service brake x 60, old version Pull spring 2-4 S, 102, 103, 104, 105, S+LS 200, 201, 203, 204, 205, V+S+P GT255 H H H F K45020 K08131 Brake shoe, compl. service brake x 60, new version Pull spring Farmer 240, 250, 260, 270, 280 S+V+P 303, 304, 305, 307 LS+LSA GT345, 360, F K45021 Brake shoe, compl. service brake x 60 Farmer 250V, 260V, 270V, 275V, 280V H K08131 Pull spring F K45002 Brake shoe, compl. hand brake 250 x 40 Favorit 4S, 10S, 11S, 12S, 610S, 611S F K45013 K45014 Brake shoe, compl. 279,5 x 75 / left Brake shoe, compl. 279,5 x 75 / right 240S, 250S, 260P, 270P, 275S, 280P, Farmer 303, 304, 305, 306, 307, 308, 309, 310, 311, F GT F F K45011 Brake shoe, compl. 300 x 50 Farmer 1 F GT F F F F K08086 Brake shoe, compl. 300 x 60 F250GT F
41 HOLLAND Fendt Article description Tractor model K45128 Brake shoe, compl. x 50 2D, 2DE, 2E, 2S F K45129 Brake shoe, compl. x S, 250S, 260PA, 260S, 270PA, 275S, 280LS, 280PA, 304, 305, GT345, GT350, GT360, GT365, GT K45001 Brake shoe, compl. hand brake 250 x 30 Favorit 611, 612, 614, 615 LS+LSA F K45002 Brake shoe, compl. hand brake 250 x 40 F F K45003 Brake shoe, compl. service brake 250 x 60 F K45004 Brake shoe, compl. service brake 250 x 70 F K45005 Brake shoe, compl. service brake 270 x 80 F F K03069 Pull spring 1 piece per wheel F K03071 Pull spring for 250 x 30/40 2 pieces per wheel F K08088 K08089 Intermediate disc (4 pcs) front PTO clutch 139,4 x 81 x 2,5 / 25 teeth (6 pcs) front PTO clutch 153,5 x 98,2 x 3,3 / 8 teeth Farmer 100 serie (FW ) Farmer 200 serie (FW ) Farmer 300 serie (FW ) F GT
42 Fendt HOLLAND K08090 K08091 Intermediate disc (7 pcs) thickness 2,5 Intermediate disc (2 pcs) thickness 2,7 front PTO clutch 167,5 x 105 / 44 teeth Favorit 816, 818, 822, 824 Favorit 916, 922, 924, K08092 (8 pcs) front PTO clutch,8 x 105,2 x 3,5 / 6 teeth K08093 K08094 Intermediate disc (5, 8, 9 pcs) thickn. 2,5 Intermediate disc (10, 12 pcs) thickn. 2,0 Favorit 10, 11, 12 Farmer 102, 103, 104, 105, 106, 108 Favorit 600, 610, 612, 614, LSA K08095 Intermediate disc (2 pcs) thickness 2,7 front PTO clutch 139,4 x 81 / 25 teeth K08089 (6 pcs) front PTO clutch 153,5 x 98,2 x 3,3 / 8 teeth K08090 Intermediate disc (5 pcs) front PTO clutch 167,5 x 105 x 2,5 / 44 teeth Farmer 309, 311, K08092 (5 pcs) front PTO clutch,8 x 105,2 x 3,5 / 6 teeth
43 HOLLAND Fiat Article description Tractor model K09022 Ø 230 mm, 22 teeth Som. 40, 45, 50, 511, 612, 615, 650, 670, 715, K09023 Brake band, hand brake 50 x 6 311R, 312, 315, 331R, 411R, 415, 450, 480 (for 6 gear transmission) K09024 Brake band, hand brake 50 x 6 400, 440, 450, 480 (for 8 gear transmission), 500, 540, 550, 600, K09025 Brake band, hand brake 56 x 6 440, 446, 450, 480, 500, 540, 640, 55-46, 60-46, K09028 Clutch master cylinder without plug connection 70-90DT, 72-94DT, 80-90DT, 82-94DT, , , , , K09030 L60, 65, 75, 85, 95, M100, 115, 135, 160, TM115, 120, 125, 130, 135, 140, 150, 155, TM165, K09031 Slave cylinder 70-90DT, 72-94DT, 80-90DT, 82-94DT, , , , , -90, F100, 110, 115, 120, 130, 140, M100, 115, 135, TM115,
44 Ford HOLLAND K35008 Disc lining set 102 x 51 x 4,8 4 pieces + rivets 2000, 3000, 4000, 5000, 7000, 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 4100, 4110, 4600, 4610, 5600, 5700, 6600, 6700, 7600, 7700, 5110, 5610, 6410, 6610, 6710, 6810, 7410, 7610, 7710, with driver cab, without All-wheel Drive K10001 K10002 (lined) Ø 102 mm / 23 teeth Actuating unit Ø 102 mm 5610, 6610, 7610 to MY. 9/85 without driver cab, without All-wheel Drive 5640, 6640, 7740, 7840, 8240, Km/h TS90, TS100, TS110 to C3945 switchable PTO shaft, with hand brake D5NN2N625A E9NN2N625AB C5NN2N623B K35003 Disc lining set 165 x 89 x 4,7 4 pieces + rivets Major, Super Major from MY 11/ E1ADDN2284 K10003 (lined) Ø 165 mm / 22 teeth E99FB9 K10004 Actuating unit Ø 165 mm K35009 Disc lining set, hand brake 127 x 70 x 4,7 4 pieces + rivets TX30, 32, 34, 36 TC 52, 55, 56, 57 TF 42, 44, 46 K35004 Disc lining set, service brake 178 x 101 x 4,8 4 pieces + rivets K10005 (lined) Ø 178 mm, 27 teeth K10006 Actuating unit Ø 178 mm 44
45 HOLLAND Ford Article description Tractor model K10007 Ø 203 mm / 22 teeth 2810, 2910, 3910, 4110, 4410, 4610, 3900, 4000, 4100, 4200, 4400, 4500, 4600 C5NN2AD97B K10008 Intermediate disc C5NN2N K10009 Actuating unit Ø 203 mm 2810, 2910, 3910, 4110, 4610 to MY 6/88, 3900, 4100, 4600 D5NN2N317A K10010 Ø 203 mm / 22 teeth 3230, 3430, 3930, 4130, 4630, 4830, 5030 E9NN2A097AA K10008 Intermediate disc C5NN2N K10014 K10015 Ø 222 mm / 22 teeth Intermediate disc 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 5110, 5610, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810 without driver cab + hydraul. trailer, without hand-service brake C7NN2A097B C5NN2N315A K10016 Actuating unit Ø 222 mm C5NN2N317A K10019 K10020, oil bath 222 mm / 22 teeth Intermediate disc mechanical brake 5610S, 6610S, 6810S, 7010, 7610S, 7810S, 8010, 5640, 6640, 7740, 7840, 8240, 8340, TS80, 90, 100, 110 me.+hy. E9NN2A097BA E6NN2N315AA K10021 Intermediate disc hydraulic brake
46 Ford HOLLAND K10012 for brake master cylinder 5640, 6640, 7740, 7840, 8240, 8340, TS90, 100, 110, K , 4835, 5635, 6635, 7635, 8160, 8260, 8360, 8560, TL70, 80, 90, K10032 Wheel brake cylinder 5640, 6640, 7740, 7840, 8240, 8340, TS90, 100, 110, E9NN2N448AB K10033 Clutch master cylinder 5640, 6640, 7740, 7840, 8240, 8340, TS90, 100, 110, K x 51 Dextra, Super Dextra K15049 Brake shoe, compl K30078 K x 38 Brake shoe, compl. 2000, 2100, 2110, 2120, 2130, 2600, 2610, 3000, 3100, 3120, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4000, D9NN2218AA F2NN2218AA
47 HOLLAND Güldner Article description Tractor model K30002 K x 4 x 200 / 8 holes Rivets 3 x 8 G15, Tessin, Burgund, A2A, A2B, A2D, A2K, A2L, A2W, A3K, A10, ABL, ABN, AX, AK, ALK, AZK, ADK, ADN, AF15, ALD, ADS, ADL, ADA, ABS, ALB drum x20 K30009 K x 4 x 188 / 7 holes Rivets 3 x 8 A2 B+D+DL+K+KN, A3 K+KT, A10, AF15, AF20, AB, ABN, ABS, ADA, ADK, ADL, ADN, ADS, AK, ALB, ALD, ALK, AZK, VK, A28, AF30, AFN, AFS, G50, A, S, AS, G15, G25, G35, G40 drum x30 K30006 K x 4,5 x 190 / 7 holes Rivets 3 x 8 G15, G25, G30, G40, G45, AK, ALK, AZK, A2K, ADK, ADN, AF15, ALD, ADS, ADL, A2D, AF20, ADA, ABS, ALB, ABL, A3K, ABN, AB, A2B, A2A, A2D, A2L, A2W, A4M drum x40 K30019 K x 4,7 x 190 / 8 holes Rivets 4 x 8 drum x50 K30027 K x 4,5 x 172 / 8 holes Rivets 4 x 8 drum x50 K30026 K x 5 x 192 / 10 holes Rivets 4 x 10 G25, 30, 35, 40, 45 (service), ZF gearbox A208, A208III, A210II, A210III, A212 (not for vehicles before MY 64 with band brake) drum 200x50 K30008 K x 5 x 270 / 10 holes Rivets 4 x 10 G50, G60 drum 250x40 K30024 long 50 x 6 x 327 / 16 holes A 3 P drum 300x50 K30021 K40004 short 50 x 6 x 287 / 14 holes Rivets 4 x 10 K30044 K40004 long 60 x 6 x 382 / 16 holes Rivets 4 x 10 A28, AF30, AFN, AFS drum 350x60 47
48 Hanomag HOLLAND K30009 K x 4 x 188 / 7 holes Rivets 3 x 8 C 115 Greif drum x30 K30006 K x 4,5 x 190 / 7 holes Rivets 3 x 8 drum x40 K30007 K x 4 x 240 / 7 holes Rivets 4 x 8 Hand brake C220, R22, 25, 27, 28, 35, R324, 430, 435, 442, 445, 540, 600 drum 200x30 K30008 K x 5 x 270 / 10 holes Rivets 4 x 10 Hand brake R40, 45, 55, R450, 455, 460, 545, Robust 800, ATK drum 250x40 K holes R217, R420, R425, R 16, R 19 drum 300x K30044 K40004 long 60 x 6 x 350 / 16 holes Rivets 4 x 10 Service brake C220, R22, 25, 27, 28, 35, R324, 430, 435, 445, 540 drum 350x60 K30030 K40007 long 60 x 8 x 435 / 16 holes Rivets 5 x 12 Service brake R435, 440 Robust-Brillant 600 Brillant drum 400x60 K30045 K40015 long 80 x 8 x 435 / 16 holes Rivets 5 x 20 R40, RD40, R45, R55, R450, R455, R460, R545, Robust 800 drum 400x80 48
49 HOLLAND Hanomag Article description Tractor model K35012 Disc lining set Ø 152 mm, 10 holes 4 pieces + rivets Brilliant 601, 701, Robust 901 K35006 Disc lining set Ø 152 mm, 12 holes 4 pieces + rivets K16005 Actuating unit Ø 152 mm K08015 Actuation cylinder K08016 K35003 Disc lining set, service brake Ø 165 mm, 4 pieces + rivets K08007 Actuating unit service brake 49
50 Holder K30002 K x 4 x 200 / 8 holes Rivets 3 x 8 drum x20 K30009 K x 4 x 188 / 7 holes Rivets 3 x 8 E5, E6, E8, B12, B25, A8B A20, A21, A45, A218 P50, AG3, AG35 drum x30 K x 4 x 155 / 10 holes A218 drum x35 Hürlimann K35004 Disc lining set Ø 178 mm incl. rivets H345, H355, H360 (to no ) K11001 (lined) Ø 178 mm 45 mm x 13 teeth K11002 Actuating unit
51 HOLLAND Hürth Getriebe / Achse Article description Tractor model K30009 K x 4 x 188 / 7 holes Rivets 3 x 8 drum x30 K30033 K x 5 x 210 / 10 holes Rivets 5 x 10 for brake band drum x70 K30008 K x 5 x 270 / 10 holes Rivets 4 x 10 drum 250x40 K30021 short 50 x 6 x 287 / 14 holes drum 300x50 K30022 long 50 x 6 x 327 / 16 holes K40004 Rivets 4 x 10 K30031 short 60 x 8 x 324 / 12 holes drum 400x60 K30030 long 50 x 6 x 436 / 16 holes K40007 Rivets 5 x 12 JCB K12001 Brake pad, hand brake 90 x 76 x 16,5 rear axle Fast Truck , 2135, 2150, 3185, HMW / K12002 Brake pad, hand brake Fast Truck 1115, 1125, 1135, 2115, 2125, 2135, 2150, 3155, 3170, 3185, 3190, /21218 K12003 Brake pad, service brake 117 x 83 x 19 15/ / /
52 John Deere K35001 Disc lining set 127 mm / 10 holes service + hand brake T300, 310, 500 D065G005 L12268 RL10169 K13003 Actuating unit K35012 Disc lining set 152 x 79 x 5 4 pieces + rivets T700, T510-T710 AL13469 K13005 Actuating unit K13046 Brake band 1350, 1850, 1950, 2250, 2450, 2650, 2850 AL38213, AT K13006 Ø 306 x 10,2 mm 12 teeth 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1630 (to ), 1640, 1830 (to ), 2020, 2030 (to ), 2040, 2120, 2130, 2140 AZ40478 AT22034 K13010 Ø 306 x 7,2 mm 12 teeth 830, 840, 930, 940, 1030, 1040, 1130, 1140, 1550, 1630 (from ), 1640, 1750, 1830 (from ), 1840, 1850, 1950+N, 2030 (from ), 2040, 2040S (to ) 2250, 2450 AL38234 AL29645 K13015 Ø 306 x 4,9 mm 12 teeth, reinforced toothing 840, 940, 1040, 1140, 1350, 1550, 1640, 1750+V, 1840, 1850+F+V, 1950+F+N, 2040, 2250, 2450+F, 2650+F, 3050 AL65872 AL66796 AL66797 AL68507 AL68508 K13017 Ø 306 x 10,2 mm 15 teeth 1640, 1840, 2040, 2040S (to ), 2130, 2140, 2250, 2450, 2650+N, 2850, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 3640, 3650 AL38235 AL
53 HOLLAND John Deere Article description Tractor model K13020 K13022 Ø 313 x 4,9 mm 14 teeth, reinforced toothing Ø 313 x 5,9 mm 14 teeth, reinforced toothing 6010, 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6410, 6420+S, 6505, 6506, 6510, 6520, 6600, 6610, 6620, SE AL AL75434 AL K13025 Ø 306 x 4,9 mm 15 teeth 2250, 2450, 2650, 2850, 3040, 3050, 3140, 3150, 3350, 3640 AL65871 K13026 Ø 335 x 7,8 mm 15 teeth 6800, 6810, 6900, 6910, 6910S, 7200, 7400 RE RE K13031 K13032 K13033 K13034 Ø 285 x 3,3 / 54 teeth Ø 292 x 3,3 / 87 teeth Ø 292 x 5,1 / 87 teeth Brake plate 6 mm Ø 221 x 307 mm 840, 940, 1030, 1040, 1130, 1140, 1350, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2150, 2240, 2250, 2350, 2450, 2650, 2840, 2850, 2940, 2950, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3255, 3350, 3640, 3650, 6010, 6100, 6110, 6200, 6210, 6300, 6310, 6400, 6410, 6500, 6510, 6600, 6610, 6800, 6810, 6900, 6910, 6910S, 7200, 7400, 7600, 7610, 7700, 7710, 7800, 7810 RE34786 RE34784 RE L33497 K13035 Brake plate 14 mm Ø 221 x 307 mm L55004 K13036 K13037 Brake plate 21,5 mm Ø 223 x 314 mm Brake plate 22 mm Ø 223 x 314 mm 6100, 6200, 6300, 6400, 6505, 6600, SE 6300, SE , 6100, 6110, 6120, 6200, 6205, 6210, 6220, 6300, 6310, 6320, 6400, 6410, 6420, 6420S, 6505, 6506, 6510, 6520, 6600, 6610, 6620, SE L L L75651 L K50009 Brake pad set, 2 pcs for cardan shaft 2250, 2450, 2650, 2850, 3050, 3140, 3350, 3640, 3640 S, 3650, 4040 S, 4240 S, 4350 AL66391 AL
54 John Deere K13039 Clutch master cylinder 1640, 2040, 2040S, 2140, 3040, 3140 AL34743 K13040 AL37517 K13041 Clutch master cylinder 3640, 3640S AL40974 K13050 Clutch master cylinder 2250, 2450, 2650, 2850, 3050, 3350, 3650 (to chassis no ) AL57619 K13042 Clutch master cylinder 2250, 2450, 2650, 2850, 3050, 3350, 3650 (from chassis no ) AL66918 K13043 AL67034 K13044 Clutch slave cylinder 1640, 2040, 2040S, 2140, 3040, 3140 AL34744 K13045 AL37520 K x 4 x 188 / 7 holes D1106, 1205, 1215, 1266, 1305, 1306, 1315, 1666, 6 A1205, 1215, 1305, 6 drum x30 K30022 long 50 x 6 x 327 / 16 holes D1606, 1616, 1706, 1906, 2006, 2016, 2206, 2216, 2416, 2816 drum 300x50 K30020 short 50 x 6 x 248 / 12 holes 54
55 HOLLAND Kramer Article description Tractor model K30002 K x 4 x 203 / 8 holes Rivets 3 x 8 drum x20 K30009 K x 4 x 188 / 7 holes Rivets 3 x 8 KL11, K-KB-KL12, K-KA15, KL-KB22, KB25, K33, KL110, KL-KB150, KL200, KL-KB220, KA-KB250, KA330 drum x30 K30006 K x 4,5 x 190 / 7 holes Rivets 3 x 8 drum x40 K30008 K x 5 x 270 / 10 holes Rivets 4 x 10 KL550, UF900 All-wheel Drive drum 250x40 K30021 short 50 x 6 x 234 /12 holes KB17, KL17, KB, KL, UF900 All-wheel Drive drum 300x50 K30022 K40004 long 50 x 6 x 327 / 16 holes Rivets 4 x 10 K30044 K x 6 x 380 / 16 holes Rivets 4 x 12 KB22-C, KB25, KB25-L, KA250, KB250, KA330 drum 350x60 K x 6 x 450 / 16 holes Rivets 5 x 12 K400 (hand brake) drum 400x60 K30031 short 60 x 8 x 324 / 12 holes K45, 350 Export KL400 drum 400x80 K30030 K40007 long 60 x 8 x 436 / 16 holes Rivets 5 x 12 55
56 Lamborghini K35008 Disc lining set Ø 102 mm incl. rivets R235, 235DT, 235S K14001 (lined) Ø 102 mm 23 teeth K14002 Actuating unit Ø 102 mm K35004 K14003 Disc lining set Ø 178 mm incl. rivets (lined) Ø 178 mm 13 teeth R483, 483DT (from no.1149) R503+DT, R603+DT(from 82) R583+DT, R653+DT+Frutteto, R654+DT, R683+DT R684+DT+Frutteto R724+DT K14004 Actuating unit Ø 178 mm Landini K35003 Disc lining set 4 pieces + rivets Ø 165 mm 5500, 6500, 6550, 7500, 7550, 8500, 8550, M M91 K15005 (lined) Ø 165 mm, 13 teeth M92 K15006 Actuating unit M M
Rail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107
U 411 1 Rear view mirror, round, metall 13cm Ø 002 045 2 Raised airintake 002 060 3 Side panelling, front, left 002 030 Side panelling, front, right 002 031 4 Panelling left 002 051 dto. right 002 052
VOLVO. No. Part Picture Torman No. Original No. Description DAF. DAF Oil Pump F2800-3300 - 3600 Truck Models
DAF 1 T.0160-1 680705 DAF F2800-3300 - 3600 Truck Models 2 T.01141 683322 DAF - PACCAR 85CF - CF85 - F95 - XF95-95XF Truck Models 3 T.01180 682560 DAF - PACCAR F85 - F95 - XF95-95XF Truck Models 4 T.0169-2
FUEL PARTS CATALOGUE
FUEL PARTS CATALOGUE Wide Range of Fuel Injectors & Parts Including... Fuel Injectors Injector Pipes Injector Washers CAV Injector Pumps Injector Dust Seals CAV Pump Parts Injector Banjo Bolts Delphi Injector
VOLVO. No. Part Picture Torman No. Original No. Description DAF. DAF Oil Pump F2800-3300 - 3600 Truck Models
DAF 1 T.0160-1 680705 DAF F2800-3300 - 3600 Truck Models 2 T.01141 683322 DAF - PACCAR 85CF - CF85 - F95 - XF95-95XF Truck Models 3 T.01180 682560 DAF - PACCAR F85 - F95 - XF95-95XF Truck Models 4 T.0169-2
MASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
TRAILER AXLE SPINDLE HARDWARE FRUEHAUF "PRO-PAR" AXLE AND MERITOR EARLY MODEL TP AXLE
TRAILER AXLE SPINDLE HARDWARE FRUEHAUF "PRO-PAR" AXLE AND MERITOR EARLY MODEL TP AXLE R001561 Lockwasher 12402, 42203, 5402, 65463, E1561, L1893, L893, M1051 PIN SIZE THICK O.D. I.D. DIA. LGTH 7/32" 5-1/16"
TRUCK SPECIFICATION. Info for all Truck
TRUCK SPECIFICATION Info configuration trucks for concrete pumps Info for all Truck All trucks equipped with an engine electrical managed must have the electronic control and related electric cables suitable
KELGATE BRAKES - price list for 2014 Page 1
KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'
Rear wheel brakes, servicing. Стр. 1 из 45. Note:
Volkswagen Touareg - Rear wheel brakes, servicing Стр. 1 из 45 46-2 Rear wheel brakes, servicing Rear brakes, FN 44 brake caliper, servicing Note: After replacing brake pads, depress brake pedal firmly
ETKA 06.06.2007 18:50 615-40 GOM. Model. Restrictions. Year. Illustration
993 5 5-40 8:50 993 5 5-40 8:50 Pos Part Number Name Remarks Qty disc brake with caliper mark ii brake disc F H-T-000 00>> ATE 88X5MM-5/00 AAA 3A0 5 3 brake caliper () 3A0 5 4 brake caliper right 4A0 5
1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
UK.qxp 02.11.2005 10:44 Uhr Seite 1. Tractor Clutches
UK.qxp 02.11.2005 10:44 Uhr Seite 1 Tractor Clutches UK.qxp 02.11.2005 10:44 Uhr Seite 2 The Luk Special range brings the power onto the field LuK, one of the leading worldwide manufacturers of clutch
FG Technology Truck Driver List October 2015
FG Technology Truck Driver List October 2015 Marca Modelli Engine ECU Type Read Write CHK Write Mode Agrifac WKM - BIG SIX Deutz Bosch EDC 7UC31 R/W Yes Flasher Astra Truck HD7 Cursor 8.0/10.0l Bosch MS
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
Operation of the overrun braking system.
Operation of the overrun braking system. Fig 1 The overrun device can be described as the control device of the overrun brake system. A draw-bar force is produced at the coupling point by reducing the
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)
46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel
4850-01 BRAKE SYSTEM OVERVIEW AND OPERATION PROCESS 1. BRAKE SYSTEM GENERAL INFORMATION 1) DESCRIPTION AND OPERATION 16-3.
16-3 OVERVIEW AND OPERATION PROCESS 1. GENERAL INFORMATION 1) DESCRIPTION AND OPERATION (1) Brake System Even though a driver cuts off the power, while driving, the vehicle continues to move due to the
EXPORT w w w. k r a n m a n. c o m
EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load
PARTS SECTION. Section MF4
PARTS SECTION Section MF4 Wheels, Steering, Axle; hubs, rims, steering pumps, ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE 70243014 180, 185, 190, 190XT 70248233 180, 185, 190, 190XT Radiator
Products for your. www.hella.com/truck
Products for your Scania Truck www.hella.com/truck Lighting Page 3-31 Starter Page 32-71 Generator Page 72-117 Flasher, Relays Page 118-126 Water Pump, Wiper Blade Page 127-138 Cap (Fuel tank) Page 139-144
Fig 1 Power Transmission system of Tractor
POWER TRANSMISSION SYSTEM Transmission is a speed reducing mechanism, equipped with several gears (Fig. 1). It may be called a sequence of gears and shafts, through which the engine power is transmitted
Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
MAN - MERCEDES - BENZ
SAYFA: 1 10100 10102 10103 355 353 06 15 355 353 03 15 346 353 08 15 AXLE GEAR AXLE GEAR AXLE (WITH BUSHING TYPE) (WITH BUSHING TYPE) (WITH BUSHING TYPE) 2521 2517-2521-2622 10104 10105 10106 308 350 00
Original ATE wheel cylinders. Reduced in weight and resistant to brake fluid
Original ATE wheel cylinders Reduced in weight and resistant to brake fluid 1 Original ATE wheel cylinders The ATE brand is backed up by Continental, one of the worlds biggest brake specialists: this is
KÄSSBOHRER/SETRA. Wrenches for hub cover extraction. Wrenches for hubs. ideal for Bus. for models KÄSSBOHRER/ SETRA, MERCEDES and MAN
Wrenches for hub cover extraction. Wrenches for hub cover and trailer nuts Axle nut disassembly Axle models KÄSSBOHRER/SETRA: front axle 6.5 and 7.5t in types S 210 and 215, SG 219-221 and dead axle types
MERCEDES FIRST EDITION - 2013
FIRST EDITION - 2013 CONTENTS Accessories... 1 Hydraulic Jacks Air Intake... 2 Air Filter Charger Charging System Intake Charger Hose Intake Manifold Intake Pipe Air Filter Intercooler Charger Aircondition...
The New Zetros. Mercedes-Benz Military Vehicles.
The New Zetros. Mercedes-Benz Military Vehicles. Mercedes-Benz conventional-type trucks Missions accomplished worldwide for more than 50 years. Since building the world s fi rst truck more than 100 years
Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1
Mercedes Benz. Spare parts for trucks. Qualität made by dph Germany. Dichtungspartner Hamburg. Mercedes Benz Spare parts for trucks 2006 1
Mercedes Benz Spare parts for trucks Qualität made by dph Germany Dichtungspartner Hamburg Mercedes Benz Spare parts for trucks 2006 1 Important notes 1. This catalogue replaces all previous issues. 2.
1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles: Examines vehicle and discusses with customer or
The hydraulically damped overrun control device is made up of six main elements that control and operate the braking system.
THE OVERRUN PRINCIPLE The hydraulically damped overrun control device is made up of six main elements that control and operate the braking system. 1. The Housing 2. The Drawtube 3. The Overrun Lever of
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
SAM-MERCEDES 30D CC T1 PROTOTYPE DIESEL DAKAR 2014 PARTICIPATION OFFER
SAM-MERCEDES 30D CC T1 PROTOTYPE DIESEL DAKAR 2014 PARTICIPATION OFFER We reserve the right of contingent falsity and typing errors. Offers are without engagement and subject to prior sale. Car specifications
Victims Compensation Claim Status of All Pending Claims and Claims Decided Within the Last Three Years
Claim#:021914-174 Initials: J.T. Last4SSN: 6996 DOB: 5/3/1970 Crime Date: 4/30/2013 Status: Claim is currently under review. Decision expected within 7 days Claim#:041715-334 Initials: M.S. Last4SSN: 2957
MKV Golf GTI Rear Brake Service - Replace Pads and Rotors
Page 1 Installation Procedures MKV Golf GTI Rear Brake Service - This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of
Operating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
Titan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
Meritor Trailer Products
Meritor Trailer Products Contents LM & LC...5 TA & TC...37 TE...63 TM...77 Steering Axles...105 Flexair & Flexlite...119 Indair...171 SMT...181 AXL...193 3 4 Meritor Trailer Products Axle & Brake Parts
Class 5 to 7 Truck and Bus Hydraulic Brake System
Class 5 to 7 Truck and Bus Hydraulic Brake System Diagnostic Guide 1st Edition * 5+0 Important Service tes The information in this publication was current at the time of printing. The information presented
13. REAR WHEEL/BRAKE/SUSPENSION
13. REAR WHEEL/BRAKE/SUSPENSION 13 3.5~4.5kg-m 8.0~10.0kg-m 0.8~1.2kg-m 3.0~4.0kg-m 2.4~3.0kg-m 3.5~4.5kg-m 6.0~8.0kg-m 13-0 13. REAR WHEEL/BRAKE/SUSPENSION 13 REAR WHEEL/BRAKE/SUSPENSION SERVICE INFORMATION...
Hydraulic Power Brake (HPB) Catalog
PB-06107 Revised 03/11 Hydraulic Power Brake (HPB) Catalog Page Accumulator 4 Diagnostic and Test Equipment 10 Electronic Control Unit (ECU) 4 HCU Accessories 6 HCU Quick Reference 3 HCU Reservior 4 Hydraulic
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
MINI EXTENDED SERVICE CONTRACTS
MINI EXTENDED SERVICE CONTRACTS LESS WORRY, MORE WEEEE! CONTINUING COVERAGE FOR YOUR NEW, USED, OR CERTIFIED PRE-OWNED MINI. Whether your odometer is ticking toward the end of your original 4-year/50,000-mile
Electronic Manual Gearbox
Service. Self-Study Programme 221 Electronic Manual Gearbox Design and Function Taking the Lupo as the basis, Volkswagen has developed the world's first 3 L car that will also go into volume production.
Sample G1 ASE-type Certification Test. Sample ASE Maintenance and Light Repair (G1)-Type Certification Test
Sample G1 ASE-type Certification Test Sample ASE Maintenance and Light Repair (G1)-Type Certification Test Content Area Questions In Test Percentage Of Test A. Engine Systems 9 16% B. Automatic 4 7% Transmissions
Eaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-5005C March 2003
Eaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-00C March 00 For the most current information, visit the Roadranger web site at www.roadranger.com Contents How To Use The Illustrated Parts
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-21
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-21 Case IH MXU 100 Pro MXU 110 Pro MXU 115 Pro MXU 125 Pro MXU 135 Pro MXU 100 X Line MXU 110 X Line MXU 115 X Line MXU
SPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
Chapter 18: Brakes and Clutches
Chapter 18: Brakes and Clutches Nothing has such power to broaden the mind as the ability to investigate systematically and truly all that comes under thy observation in life. Marcus Aurelius, Roman Emperor
Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
Drum Brake Owners Manual
Drum Brake Owners Manual TIE DOWN ENGINEERING, Inc. 5901 Wheaton Drive, Atlanta, GA 30336 www.tiedown.com (404) 344-0000 Fax (404) 349-0401 2007 TIE DOWN ENGINEERING, INC. ALL RIGHTS RESERVED Instruction
125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN
SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x
Sparex Replacement Spare Parts for Ford/New Holland (65>) Page No. Seats and Cab
for Ford/New Holland (65>) Page 1 Beacons, Brackets, Mirrors and Related Components Seats and Cab Related Components 2 Wipers and Related Components 3 Seats 4 Seat Components 5-6 Cab Glass - Worldwide
Cold milling machine W 1000 F. Technical specification
Cold milling machine W 1000 F Technical specification Technical specification 2 Cold milling machine W 1000 F on four wheels Cold milling machine W 1000 F on four crawler tracks Milling width max. mm 1,000
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
BRAKE DRUM AND ROTOR SERVICE INFORMATION
SERVICE INFORMATION To achieve maximum drum life and optimum performance, proper brake maintenance and brake balance are essential. Consult your truck or trailer manufacturer s maintenance manual for proper
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
Information and Instructions
Information and Instructions This shop manual contains several sections each covering a specific group of wheel type tractors. The Tab Index on the preceding page can be used to locate the section pertaining
Rear Disc Kit. Front Caliper
Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,
JOHN DEERE. Front Linkage Front PTO
Front Linkage Front PTO Great technology for the work in the field Optimum quality latest technology compact design use worldwide SAUTER Conception Development, production, sales and technical support
Replacement Spare Parts for FORD TRACTOR
(3650) POWER STEERING HYDRAULIC PUMP GEAR SET (9T.) (866) HYDRAULIC PUMP FRONT DRIVE GEAR (10T.) (C5NN 3A710 A/NUT) STRG. GEAR SHAFT MAIN NUT (C5NN 3A710 A/TUBE) STRG. GEAR SHAFT MAIN NUT TUBE (C5NN 3A710
Valtra A Series Compact and Orchard models A53 / A63 / A73
Valtra A Series Compact and Orchard models A53 / A63 / A73 Full range of tractors in all size classes Individually Yours 2 Valtra is the one and only tractor manufacturer in the Nordic region. Our roots
Diagnostics Tools. for All Makes of agricultural machinery
Diagnostics Tools for All Makes of agricultural machinery Including: John Deere New Holland Massey Ferguson Case Fendt Deutz-Fahr Claas McCormick Landini Fiat JCB and many others... www.vapormatic.com
Front brakes (FN- 3), servicing
j a t Front brakes (FN- 3), servicing 46-1 Front brakes, servicing Note: Install complete repair kit. After replacing brake pads and before moving vehicle, depress brake pedal several times firmly to properly
2016 Price Sheet. Custom Built Replacement Chassis
2016 Price Sheet Custom Built Replacement Chassis 5557 Chevy Car Direct Replacment Chassis 15,895 5362 Corvette Direct Replacment Chassis 15,895 5557 Chevy Car Pro Street Chassis 16,895 5362 Corvette Pro
Introduction... 2. Body Specifications... 3. Technical Data... 4. Body... 5. Interior Rear Seats... 6. Center Arm Rest... 7. Child Seat Restraint...
Table of Contents Subject Page Introduction.......................................... 2 Body Specifications.................................... 3 Technical Data........................................
ALL ORIGINAL NUMBERS. MARKS AND MODELS FROM VEHICLE MANUFACTURERS LISTED IN THIS CATALOGUE ARE FOR COMPARISON PURPOSES ONLY.
Ecef ALL ORIGINAL NUMBERS. MARKS AND MODELS FROM VEHICLE MANUFACTURERS LISTED IN THIS CATALOGUE ARE FOR COMPARISON PURPOSES ONLY. ECS - 000 K0000 K000 K000 Caliper Tappet and Boot set Kaliper Toz Lastik
EZ-Steer Assisted Steering System
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-54 Case IH CVX 1135 CVX 1145 CVX 1155 CVX 1170 CVX 1190 CVX 1195 CVX 135 CVX 145 CVX 155 CVX 175 CVX 195 New Holland TVT
K-39/K-39B. Drain Cleaning Machine. Ridge Tool Company/Elyria, Ohio, U.S.A.
K-/K-B A- AUTOFEED Cable Chuck Pan Head Screw # - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () Spacer Clips () Gasket Drum Front Drum Liner Screw # - x () Drum Back Power
DiscPlus DX195 and DX225 Air Disc Brakes
Revised 11-04 Technical Bulletin Revised 1 Technical 11-04 Bulletin DiscPlus DX195 and DX225 Air Disc Brakes Inspection, Installation and Diagnostics Air Disc Brake Inspection Intervals and Procedures
SPARE-PARTS BOOK BZ 150-195 (SA) Model: TABLE OF CONTENTS. Chapter 1: Liftchassis. Chapter 2: Platforms. Chapter 3: Cylinders
SPARE-PARTS BOOK TABLE OF CONTENTS Model: BZ 50-95 (SA) Chapter : Liftchassis A4B030SA Chassis Page 4 Chapter 2: Platforms PLB040 Steel platform Page 6 PLB04 Aluminium platform Page 8 PLB04a Aluminium
12. REAR WHEEL/BRAKE/SUSPENSION
12 12 12-0 SERVICE INFORMATION... 12-1 REAR BRAKE... 12-5 TROUBLESHOOTING... 12-2 REAR SHOCK ABSORBER... 12-8 REAR WHEEL... 12-3 REAR FORK... 12-9 SERVICE INFORMATION GENERAL INSTRUCTIONS When installing
HydRAUlic brake PROdUcT catalog quick RefeRence
HydRAUlic brake PROdUcT catalog quick RefeRence PB-99127 Supplement Revised 10/08 From 2003 through 2008 2003 60mm Twin Piston R42R12068 R42R12068 MD1010 66mm Twin Piston R42R12067 R42R12067 MD1010 70mm
Electric chain hoists LIFTKET
Electric chain hoists LIFTKET 1 Spare part list AA AB Description of spare part Page Lifting gear section 01: hoist body 4 Version 1-1.3 5 Version 2-4.2 6 Version 5-7.2 7 Version 8.1-9.1 8 Version 1AK-5.1AK
ZETOR. Parts Catalogue
ZETOR Parts Catalogue Quality Tractor Parts. Mullingar Business Park, Mullingar, Co. Westmeath. Ph: +353 44 934 1638 Email: info@qtponline.com Web: www.qtponline.com Zetor Contents Engine ZET 3 Gaskets
Wynn s Extended Care
Wynn s Extended Care Every car deserves to receive the very best care... especially yours. How Do You Keep Your Reliable Transportation Reliable? Count on Wynn s Because Wynn s has been caring for cars
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
VE17 DSP. Model: VE-17DS. Lista Części Polish
Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU
6,100 7,000 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
CX (T3), great performance for unlimited versatility
CX90-100-110 (T3) The CX range is equipped with the new TIER-3 compliant Perkins 1104D series turbo engines. With powers of up to 102 hp, the new engines provide exceptional power and torque levels. The
Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing
34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism
ACTROS - Specifications
ACTROS - Specifications Index Actros Cabs...2 Cab Drawings...3 Actros Engines...4 Transmissions...5 Chassis Frame...6 Truck Tractor...8 Freight Carrier...10 Tipper and All Wheel Drive...11 1 Actros cabs
Servicing Rear Axles on Ford 9N/2N Tractors
Servicing Rear Axles on Ford 9N/2N Tractors by John Korschot - www.johnsoldiron.com (March 2010) So you've heard that these tractors have poor brakes. Well, that's not true, they have a poor axle seal
Kobelco Extended Warranty Program. www.kobelco-europe.com
Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco
Checking Wheel Brakes Wear
Issue 1 en 1 Checking Wheel Brakes Wear Contents Disc Brakes... 3 Removing the wheels... 4 Checking the Brake Pads... 5 Check brake disc thickness... 7 Checking brake disc for cracks... 8 Drum Brakes...
New MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan
AGRICULTURE GARDENING New MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan ENGINE Engine Nº of Cylinders Displacement Rated RPM (25) Water Cooled Diesel 1,125 cc 2,500
UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING
UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING Introduction to Automobile Engineering Structure 1.1 Introduction Objectives 1.2 Definition 1.3 Classification of Vehicles 1.4 Layout of an Automobile Chassis
Micro Cart User's Guide
Micro Cart User's Guide To take full advantage of the ergonomic features of your new Sun Mountain Micro Cart, please read the following information. SUN MOUNTAIN 1 Your Micro Cart has several innovative
ŠKODA Rapid Petrol engines
ŠKODA Rapid Petrol engines Technical specifications 1.2 MPI/55 kw 1.2 TSI/63 kw 1.2 TSI/77 kw 1.6 MPI/77 kw 1.6 MPI/77 kw (A) 1.4 TSI/90 kw (A) Engine Engine type turbocharged petrol petrol engine, in-line,
Tractor Units, Rigids & Trailers
We go the extra mile. EMAIL US: sales@britcom.co.uk manchester@britcom.co.uk Tractor Units, Rigids & Trailers August Stock List CONTACT US: MARKET WEIGHTON: +44 (0) 1430 871010 MANCHESTER: +44 (0) 161