DISTRIBUTION PARTNERS FOR COSMETIC INGREDIENTS:

Transcription

1

2 2 P a g e DISTRIBUTION PARTNERS FOR COSMETIC INGREDIENTS: USA CA SPECIALITIES LTD. PARADIGM SCIENCE INC. PO BOX 9 67 BEAVER AVENUE 712 WILSON STREET ANNANDALE, NJ CHESTER, SC Phone: Phone: Fax: Fax: sales@paradigmscience.com sales@ca-specialities.com Website: Website: ROSS ORGANIC INC BELL RANCH DRIVE SANTE FE SPRINGS, CA Phone: Fax: info@rossorg.com Website: CANADA FRANCE & LUXEMBOURG FORTE INGREDIENTS INC. PhDs Dr. Hubert Plantefève 4 LONGHOPE PLACE 2 DOMAINE DE BRAMESCHHOF TORONTO, ON M2J 1Y KEHLEN Phone: LUXEMBOURG info@forteingredients.ca Phone: Website: hubert.plantefeve@phds-sourcing.com Website: KOREA JAPAN SHINWOO ICT CO., LTD. AZMAX CO. LTD. #1907, DAERYUNG TECHNO TOWN 15 CHA, MATSUDA YAESUDORI, BLDG F , GWANYANG-DONG, DONGAN-GU, HATCHOUBORI, CHOU-KU ANYANG-SI, GYEONGGI-DO, KOREA TOKYO Phone: Phone: Fax: Fax: shinwoo@shinwooict.com sales@azmax.co.jp Website: confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are Copyright 2014, Inc.

3 P a g e 3 Table of Contents SkinCare Moisturizer with Vertasil TM-VE1...4 Moisturizer with SPF and SiBrid DE Dry Skin Cream (W/O) with SiBrid DE Pomegranate Body Lotion with SiBrid DiEthicones...7 Cleansers After Shave Gel for Men with Vertasil TM-L01 & SiBrid DE Cleanser with Vertasil VAN Body Wash with SiBrid DE-12 & SiQube Q Cleansing Milk with Vertasil TM-L Eyeshadows Frost Eye Shadow with SS Treated Pigments & SiBrid DE Long Wearing Eye Shadow with SR Pigments & SiBrid DE Foundations Powder Cream Concealer with ML Pigments Satin Feel Foundation with SiBrid DE-12 & SS Treated Pigments Velvety Concealer with Hydrosperse (HS) Pigments Cucumber Smoothie Color Correcting Primer with Vertasil TM-L01, SiBrid DE12, & SiBrid PM Gloss Lipstick with SiBrid DE-15 & PM Lipsticks Lipstick with SiBrid TM Super Shine Lip Gloss with SiBrid PM-212 & TM Mascara & Eyeliners Eyeliner with Hydrosperse (HS) Pigments Waterproof Mascara with Super Durable (SR) Pigments confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

4 4 P a g e Moisturizer with Vertasil TM-VE1 Vertasil TM-VE1, a unique hybrid fluid, is created by adding a small siloxane segment to vitamin E. In skin care, it provides a rich feel with softening and moisturizing properties. Water (Aqua) Deionized Water Carbomer Carbopol Ultrez 10 Lubrizol 0.20 Butylene Glycol Polysorbate -60 Disodium EDTA Water Tromethamine Tween 60 Deionized Water Tris Amino Croda Dow Octyldodecyl Stearate Tocopheryloxypropyl Trisiloxane Stearic Acid Glyceryl Stearate Sorbitan Stearate Ceraphyl ODS Vertasil TM- VE1 Emersol 132 Cerasynt SD Span 60 ISP Emery ISP Croda Phase D Water (Aqua) Fragrance Deionized Water Combine and disperse until thickened while heating to 75 O C. Combine and add to. Combine and heat to 80 O C under a slow stir. At 75 O C, add to B and slowly homogenize until emulsified. Continue to mix while cooling. At 35 O C, add Phase D and cool to RT while mixing. Rev 2 ( ) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

5 Moisturizer with SPF and SiBrid DE-12 P a g e 5 SiBrid DiEthicone DE-12 fluid is a light emollient that is an exceptional vehicle for pigment wetting and dispersions. It is compatible with organic compounds, including sunscreens, and provides improved spreading and blending to formulations. Polydiethylsiloxane SiBrid DE Titanium Dioxide Sunscreen Grade Titanium Dioxide 5.00 Water (Aqua) Deionized Water Magnesium Sulfate 0.20 Butylene Glycol 6.00 s Ethylhexyl Methoxycinnamate Escalol 557 Ashland 7.50 Octyldodecyl Stearate Ceraphyl ODS ISP/Ashland 5.10 PEG/PPG 10/1 Cetyl Dimethicone Abil EM 90 Evonik 5.00 Myristyl Methicone AM Beeswax White Beeswax Hydrogenated Castor Oil Castor Wax MP80 Vertellus Disperse using a three roll mill. Combine and heat to 85 O C. Cool to 70 O C while mixing. Add to under slow homogenization. Combine first two ingredients in and stir until dissolved. Add remaining ingredients to and mix while heating to 70 O C. At 70 O C, slowly add to C and homogenize until emulsified. Mix for an additional 5 minutes while holding heat. Cool to 30 O C with paddle blade. Rev 2 (072313) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

6 6 P a g e Dry Skin Cream (W/O) with SiBrid DE-23 SiBrid DE-23 is a rich emollient that provides a rich, cushiony, and substantive feel to skincare products. Water (Aqua) Magnesium Sulfate Butylene Glycol Deionized Water Cyclopentasiloxane Polydiethylsiloxane PEG-9 Polymethylsiloxyethyl Dimethicone Cyclopentasiloxane (&) Dimethicone/Vinyl Dimethicone Crosspolymer DC 245 Fluid SiBrid DE-23 KF 6038 USG 103 Dow Corning Shin-Etsu Shin-Etsu Phase E Laureth-7 Rhodasurf L-7/90 Rhodia 0.5 Premix under propeller blade. Combine and homogenize slowly until homogenous. Premix Phase E and add to. Homogenization until blended. Slowly add to C under slow homogenization. Homogenize strongly for an additional 5 minutes. Rev 1 ( ) FORMULA GJH confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

7 P a g e 7 Pomegranate Body Lotion with SiBrid DiEthicones As an emollient, SiBrid DE-15 provides a non greasy, light, and breathable feel to skin care products and can be used to reduce the tackiness of natural oils in formulations. SiBrid DE-12 is soluble in common skincare ingredients such as Caprylic/Capric Triglyceride and solubilizes Vitamin E completely into the oil phase. Water (Aqua) Deionized Water Xanthan Gum Glycerin Van Zan RT Vanderbilt Caprylic/ Capric Triglyceride Helianthus annuus (Sunflower) Seed Oil Polydiethylsiloxane Polydiethylsiloxane Tocopherol Laureth-7 Polyglyceryl-2 Sesquiisostearate Sunflower Oil SiBrid DE-15 SiBrid DE-12 Vitamin E Rhodasurf L-7/90 Hostacerin DGI DSM Rhodia Clariant Ammonium Acryloydimethyltaurate/ VP Copolymer Aristoflex Clariant 0.80 Phase D Fragrance Pomegranate 2300 Vanessence/ Paradigm Science In, premix gum and glycerin and add to water. Mix under high speed until gum is hydrated and dispersed. Premix and slowly add to. Mix under high speed to emulsify. Add and mix until thickened. Add Phase D and mix until dispersed. Adjust ph to 5.5 if necessary. Rev 1 (042514) FORMULA LF2-089 confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

8 8 P a g e After Shave Gel for Men with Vertasil TM- L01 & SiBrid DE-12 Vertasil TM-L01 can be used as a cyclomethicone replacement and is especially effective when combined with SiBrid DE-12 in products geared for men. The multiifunctional Vertasil TM-L01 siloxane base provides emolliency while the limone segment cleans and refreshes the skin. Water (Aqua) Deionized Water Isopropyl Alcohol Carbomer Tetrasodium EDTA Populus tremuloides (Aspen) Bark Extract Lavendula angustifloria (Lavender) Flower Extract Calendula officinalis (Calendula) Extract Citrus limonum (Lemon) Peel Extract Thymus vulgaris (Thyme) Extract Isopropanol Carbopol 940 Lubrizol Methylcyclohexenyl Isopropyl Trisiloxane Prunus Amygdalus Dulcis (Sweet Almond) Oil Sesamum Indicum (Sesame) Seed Oil Simmondsia Chinensis (Jojoba) Seed Oil Polglyceryl-3 Oleate Polydiethylsiloxane Tocopherol Bisabolol Olive Oil PEG-7 Esters Sodium Hydroxide Fragrance Blue 1 Red 40 Water (Aqua) Vertasil TM-L01 Caprol 3GO Sibrid DE-12 Vitamin E Olivem 300 Esters NaOH (25% Soln) Burberry-Type FD&C Blue 1 Soln FD&C Red 40 Soln Deionized Water Abitec DSM Hallstar Emerald Emerald In, premix water and isopropyl alcohol under propeller blade. Slowly add Carbomer and mix at rpm for 15 minutes or until hydrated. Add remainder of and continue mixing a 300 rpm. Premix under propeller blade. Slowly add to and mix until emulsified at rpm. In, adjust B to ph of Reduce speed to rpm. In order, add remainder of to B and mix until dispersed and uniform. Rev 1 (042114) FORMULA LF2-067 confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

9 P a g e 9 Cleanser with Vertasil VAN-07 Vertasil VAN-07 is derived from the essential oil of tarragon and is tipped with a short emollient silicone tail. In a cleanser, it can replenish stripped oils leaving the skin feeling smooth and hydrated. Water (Aqua) Deionized Water Carbomer Carbopol Ultrez 10 Lubrizol 0.20 Butylene Glycol Polysorbate 60 Disodium EDTA Water (Aqua) Tromethamine Tween 60 Deionized Water Tris Amino Croda Dow Octyldodecyl Stearate Bis(Methoxyphenylpropyl)/ Butyl Dimethicone Ceraphyl ODS Vertasil VAN-07 ISP Stearic Acid Glyceryl Stearate Sorbitan Stearate Emersol 132 Cerasynt SD Span 60 Emery Ashland/ISP Croda 2.00 Fragrance Water (Aqua) Body Wash 4167/2 Deionized Water Vanessence/Paradigm Combine water and carbomer and heat to 75 O C under homogenization. Add the next three ingredients in order. Combine remaining ingredients and mix until clear. Add to batch and continue mixing. Under propeller blade, heat to O C. At 75 O C, add to and slowly homogenize until emulsified and uniform. Cool under mixing. At 30 O C, add and mix until dispersed. Rev 2 ( ) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

10 10 P a g e Body Wash with SiBrid DE-12 & SiQube Q1850 Add SiBrid DE-12 DiEthicone to cleansers to produce a silky and hydrated afterfeel in products that strip the skin of natural oils. In bodywashes, SiQube Q1850 acts as a conditioning agent that leaves a smooth feel on skin without the need to incorporate a large oil phase into the formula. Water (Aqua) Deionized Water Acrylates Copolymer Carbopol Aqua SF1 Lubrizol 8.50 Sodium Lauryl Sulfate Sodium Hydroxide Cocamidopropyl Betaine Stepanol WA-EXTRA Mirataine BET C30 Stepan Rhodia Glycerin Polysilsesquioxane Steardimonium Chloride SiQube Q Helianthus annuus (Sunflower) Seed Oil Polydiethylsiloxane Sunflower Oil SiBrid DE Phase D Fragrance Amber & Pomegranate 2300/2 Vanessence/ Paradigm Science Citric Acid Sodium Chloride Mix water and copolymer under propeller blade until dispersed. Add SLS and mix slowly until dispersed. Adjust ph to to thicken. Add cocamidopropyl betaine and mix slowly. Predisperse using shear. Add to and continue mixing. Add to B and mix well. In order, add Phase D ingredients and adjust ph to 5.5, if needed. Add sodium chloride to thicken batch and mix well. Rev 2 ( ) FORMULA LF1-019 confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

11 P a g e 11 Cleansing Milk with Vertasil TM-L01 Vertasil Limonenyl Trisiloxane TM-L01 is a hybrid fluid derived from Limonene, a natural solvent found in citrus rinds, and siloxane. In cleansers, toners, and in makeup removers, it can be used as multifunctional ingredient-- a green solvent and a cyclopentasiloxane (D5) replacement-- that will leave behind a non oily, yet soft and silky after feel. Water (Aqua) Deionized Water Acrylates/C10-30 Alkyl Acrylates Carbopol Ultrez 20 Lubrizol 0.40 Crosspolymer Sodium Hydroxide Propandiol Actives Sodium Hydroxide Soln (25%) Zemea DuPont Tate & Lyle 2.00 Methylcyclohexenyl Isopropyl Trisiloxane Isopropyl Myristate Tocopherol Polyglyceryl-3 Oleate Polysorbate 80 Vertasil TM-L01 Liponate IPM Vitamin E PGO-3 Tween 80 Lipo DSM Lipo Croda Red 40 Fragrance Sodium Hydroxide Citric Acid Water (Aqua) FD&C Red 40 in Water Grapefruit & Wheatgrass NaOH Solution (25%) Citric Acid Soln (25%) Deionized Water Emerald The Lebermuth Co Sift Carbopol onto surface of water and allow to hydrate. Mix under propeller blade until dispersed. Adjust ph to 5.5 to thicken. Continue to mix until uniform. Add remainder of. Combine. Slowly add to and emulsify. In order, add ingredients and adjust ph to 5.5 if needed. Rev 1 (041014) FORMULA LF2-068 confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

12 12 P a g e Frost Eye Shadow with SS Treated Pigments & SiBrid DE-23 The skin feel of eye shadow made with Stearyl Triethoxysilane (SS) treated pigments is exceptionally moist and soft. The long chain stearylsilane is effective in improving compressibility of pigments and pearls while improving skin adhesion. Talc (&) Stearyl Triethoxysilane Titanium Dioxide (&) Stearyl Triethoxysilane Manganese Violet (&) Stearyl Triethoxysilane Carmine (&) Stearyl Triethoxysilane (&) Methicone Talc SS Titanium Dioxide SS Manganese Violet SS Carmine SS-H Zinc Stearate Nylon-12 Benzoic Acid Zinc Stearate 921-G Orgasol 2002D Brenntag Lipo Mica & Titanium Dioxide (&) Ferric Ferrocyanide (&) Stearyl Triethoxysilane Cloisonne Violet SS surface treated BASF/ Polydiethylsiloxane SiBrid DE Octyldodecyl Stearate Ceraphyl ODS Ashland/ISP 2.00 Phase D Fluorophlogopite (&) Titanium Dioxide(&) (&) Stearyl Triethoxysilane Sachet Sparkling White SS surface treated Sandream/ Combine and mix 3 x 15 seconds on high speed in an Osterizer blender. Add and blend 2 x 15 seconds on low speed. Premix. Dropwise, add to batch and mix 3 x 15 sec on low speed. Add Phase D and blend 2 x 15 sec on low speed. Press into pans. Rev 1 ( ) FORMULA LD confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

13 P a g e 13 Long Wearing Eye Shadow with SR Pigments & SiBrid DE-23 In eyeshadows, Polymethylsilsesquioxane (&) Trimethylsiloxysilicate (SR) treated pigments improve wear and skin adhesion due to low oil absorption and better H 2 O repellancy. SR treated pigments and pearls greatly increase compressibility of powders without increasing the tendency for glazing. Mica (&) Polymethylsilsesquioxane (&) Trimethylsiloxysilicate Sericite SR 30.0 Iron Oxides (&) Polymethylsilsesquioxane (&) Trimethylsiloxysilicate Black Iron Oxide SR 4.0 Iron Oxides (&) Polymethylsilsesquioxane (&) Trimethylsiloxysilicate Red Iron Oxide SR 3.0 Iron Oxides (&) Polymethylsilsesquioxane (&) Trimethylsiloxysilicate Yellow Iron Oxide SR 3.0 Talc (&) Polymethylsilsesquioxane (&) Trimethylsiloxysilicate Talc SR 53.3 Zinc Stearate Nylon-12 Benzoic Acid Zinc Stearate 921-G Orgasol 2002D Brenntag Lipo Polydiethylsiloxane SiBrid DE Octyldodecyl Stearate Ceraphyl ODS Ashland/ISP 0.5 Mix for 3 x 15 seconds on high speed. Add and Mix for another 3 x 15 seconds. Press into pans. Rev 1 ( ) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

14 14 P a g e Powder Cream Concealer with ML Pigments Dimethicone PEG-3 Laurate (ML) treated pigments allow for higher pigment loading due to low oil absorption and excellent wetting properties. This high coverage formula applies like a cream, yet has the dry feel of a powder. Ethylhexyl Palmitate Tribehenin Ceraphy l 368 Syncrowax HRC Ashland/ISP Croda C30-45 Alkyl Methicone AMS C-30 Dow Corning 4.50 C20-40 Alcohols Performacol 425 New Phase 0.25 Benzoic Acid Ascorbyl Palmitate Technologies Ethylhexyl Palmitate Polyglyceryl-3 Diisostearate Ceraphyl 368 Cithrol PG3D2 Ashland/ISP Croda Quaternium-18 Hectorite Bentone 38V Elementis 0.20 Titanium Dioxide (&) Dimethicone PEG-3 Laurate Titanium Dioxide ML Iron Oxides (&) Dimethicone PEG-3 Laurate Iron Oxides (&) Dimethicone PEG-3 Laurate Iron Oxides (&) Dimethicone PEG-3 Laurate Talc (&) Dimethicone PEG-3 Laurate Mica (&) Yellow Iron Oxide ML Red Iron Oxide ML Black Iron Oxide ML Talc ML Serecite ML Dimethicone PEG-3 Laurate Combine and heat to 80 O C under stirring. Add and mix on three roll mill to disperse. Reheat to 70 O C and pour. Rev 1 ( ) FORMULA LF1-029 confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

15 P a g e 15 Satin Feel Foundation with SiBrid DE-12 & SS Treated Pigments s Stearyl Triethoxysilane (SS) treated pigments and SiBrid DE-12 promote easier spreading and blending on skin while providing an exceptionally soft and moist afterfeel to liquid foundations. SiBrid DE-12 DiEthicone is an excellent vehicle for wetting and dispersing pigments. Water (Aqua) Deionized Water Magnesium Sulfate 0.20 Butylene Glycol Benzoic Acid Polydiethylsiloxane Sibrid DE Cyclopentasiloxane Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone Cyclopentasiloxane & C30-45 Alkyl Cetearyl Dimethicone Crosspolymer DC 245 Fluid KF 6038 Velvesil 125 Dow Corning Shin-Etsu Momentive Phase D Laureth-7 Rhodasurf L-7/90 Rhodia Phase E Polydiethylsiloxane Titanium Dioxide (&) Stearyl Triethoxysilane Talc (&) Stearyl Triethoxysilane Iron Oxides (&) Stearyl Triethoxysilane Iron Oxides (&) Stearyl Triethoxysilane Iron Oxides (&) Stearyl Triethoxysilane Sibrid DE-12 Titanium Dioxide SS Talc SS Yellow Iron Oxide SS Red Iron Oxide SS Black Iron Oxide SS Mix under propeller blade. Premix while warming to dissolve. Add to and stir. Premix first three ingredients in. When uniform, add remaining ingredient and slowly homogenize. Add Phase D to and homogenize. Premill Phase E. Add Phase E to D and homogenize until dispersed. Add B to DE and continue homogenizing until emulsified. Increase speed and homogenize for additional 5 minutes. Rev 2 ( ) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

16 16 P a g e Velvety Concealer with Hydrosperse (HS) Pigments In water based systems, Hydrosperse (HS) pigments disperse easily without high shear, develop fully in color and tinting strength, and show reduced color flotation. Water (Aqua) Polysorbate 60 Magnesium Aluminum Silicate Sodium Lithium Magnesium Silicate Deionized Water Tween 60 Veegum Laponite XLG Croda RT Vanderbilt Rockwood Titanium Dioxide (&) Disodium Carboxyethyl Siliconate Iron Oxides (&) Disodium Carboxyethyl Siliconate Iron Oxides (&) Disodium Carboxyethyl Siliconate Iron Oxides (&) Disodium Carboxyethyl Siliconate Talc (&) Disodium Carboxyethyl Siliconate Titanium Dioxide HS Yellow Iron Oxide HS Red Iron Oxide HS Black Iron Oxide HS Talc HS Butylene Glycol Cellulose Gum Polysorbate 60 CMC7H3SF Tween 60 Aqualon Croda Phase D Potassium Cetyl Phosphate Amphisol K DSM 2.00 Phase E Polydiethylsiloxane Ethylhexyl Palmitate Glyceryl Stearate Sorbitan Stearate SiBrid DE-12 Ceraphy 368 Cerasynt SD Span 60 ISP ISP Crods In order, add ingredients to water and homogenize while heating to 70 O C. Once hydrated, add and continue mixing. In, premix butylene glycol and gum, add to B, and homogenize. Add remainder of to BC. Slowly mix Phase D into batch until dissolved and continue homogenization at 80 O C. Combine Phase E and heat to 80 O C. Slowly add Phase E to BCD. Homogenize for 15 minutes at 80 O C. Cool under mixing to 30 O C. Rev 1 ( ) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

17 P a g e 17 Cucumber Smoothie Color Correcting Primer with Vertasil TM-L01, SiBrid DE12, & SiBrid PM-212 Banish embarrassing facial redness and and soften those worry lines and wrinkles over your cyclopentasiloxane (D5) concerns. s Limoneyltrisiloxane, Vertasil TML-01, as used in this Cucumber Smoothie Primer, can provide similar light weight, non oily feel during application with more substantive and silkier after feel than cyclopenasiloxane. This primer can be used alone as a soft focus and color correcting serum or as a primer under makeup. Dimethicone/Vinyl Dimethicone Crosspolymer Polydiethylsiloxane Methylcyclohexenyl Isopropyl Trisiloxane Lauryl Phenylpropyl Methicone Tocopherol Actives Sibrid DE12 Vertasil TM-L01 Sibrid PM-212 Vitamin E DSM Polydiethylsiloxane Chromium Oxide Green (&) Stearyl Methicone SiBrid DE-12 Chromium Oxide Green SS 0.10 Mica (&) Titanium Dioxide (&) Iron Oxides (&) Stearyl Methicone Nylon-12 (&) Sodium Hylauronate Methyl Methacrylate Crosspolymer Fragrance SpectraFlex Soft Focus Gold SS Orgasol Hydra Cucumber & Green Tea / Sun Chemical Lipo The Lebermuth Co Mix under propeller blade. Predisperse. Add to and mix until uniform. In order, add to B and mix until dispersed and uniform. Rev 1(041414) FORMULA LF-080 confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

18 18 P a g e Gloss Lipstick with SiBrid DE-15 & PM-212 In lipstick applications, with its high refractive index, SiBrid PM-212 creates gloss without excessive tack and helps to prevent feathering, while SiBrid DE-15 DiEthicone provides slip and glide. Pigment Castor Oil Crystal O Vertellus Triisostearyl Citrate Schercemol TISC Lubrizol 20.0 Polydiethylsiloxane SiBrid DE Laurylphenylpropyl Methicone SiBrid PM Octyldodecanol Eutanol G BASF/Cognis 10.0 Castor Oil Crystal O Vertellus 8.5 Euphoria Cerifera Candelilla Wax, Refined Frank B. Ross 7.0 (Candelilla) Wax Microcrystalline Wax Microcrystalline Wax SP19 Strahl & Pitsch 3.5 Ozokerite Ozokerite 170D Frank B. Ross 2.0 Copernicia Cerifera Carnauba Wax #1 Strahl & Pitsch 1.5 (Carnauba)Wax s Mica (&) Titanium Dioxide (&) Silica (&) Stearyl Triethoxysilane Antioxidants SS Treated Timiron Splendid Red /EMD Disperse using a roller mill. Combine and heat to O C under propeller blade. Once is melted, add and mix for 45 minutes or until dispersed. Add and stir until dispersed. Cool under propeller blade to O C. Pour into mold. Rev 2 ( ) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

19 P a g e 19 Lipstick with SiBrid TM-081 In lipsticks, SiBrid TM-081 helps to achieve a lighter, more comfortable feel in addition to creating initial slip and improving glide on application. Pigment Castor Oil Crystal O Vertellus Triisostearyl Citrate Octyldodecyl Stearate Euphoria Cerifera (Candelilla) Wax Castor Oil Caprylyl Methicone Microcrystalline Wax Ozokerite Antioxidants s Schercemol TISC Ceraphyl ODS Candelilla Wax Crystal O SiBrid TM-081 Microcrystalline Wax SP19 Ozokerite 170D Lubrizol Ashland/ISP Frank B. Ross Vertellus Strahl & Pitsch Frank B. Ross Mica 8.00 Disperse using a roller mill. Combine and heat to 80 O C. Once melted, slowly stir under propeller blade. Add and continue stirring for 45 minutes or until dispersed. Add and stir until dispersed and desired pouring temperature is reached. Pour into mold. Rev 1 ( ) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

20 20 P a g e Super Shine Lip Gloss with SiBrid PM-212 & TM-181 In lip products, SiBrid PM-212 provides shine while ensuring comfortable wear. The addition of SiBrid TM-181 gels the oil to suspend pigments while providing a rich and substantive feel. Triisostearyl Citrate Schercemol TISC Lubrizol Laurylphenylpropyl Methicone SiBrid PM Stearyl Methicone s SiBrid TM Red 7 Lake/CI in Polydiethylsiloxane SiBrid DE-15 Mica (&) Titanium Dioxide (&) Silica (&) Stearyl Triethoxysilane SS Treated Pearl /EMD Disperse using a roller mill. Combine and stir under propeller. Add and continue stirring until dispersed. Add and stir until dispersed and uniform. Rev 2 ( ) FORMULA GJH confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

21 P a g e 21 Eyeliner with Hydrosperse (HS) Pigments s Hydrosperse(HS) surface treated pigments disperse without milling to give fine pigment particle size and full color development. Water (Aqua) Deionized Water Butylene Glycol Water Tromethamine Deionized Water Tris Amino Dow 4.00 Shellac Mantrose-Haeuser Phase D Hydroxyethylcellulose Natrosol 250 MR Hercules Phase E Iron Oxides (&)Disodium CarboxyethylSiliconate Black Iron Oxide HS Phase F Cera Alba Cetyl Alcohol Sorbitan Stearate Copernica Cerifera (Carnauba) Wax Hydrogenated Polyisobutene White Beeswax Alfol 16 Span 60 Carnauba Wax Panalane H-300E Sasol Croda Lipo Phase G Water (Aqua) Deionized Water Combine Phase F and heat to O C. Combine and heat to 50 O C. Premix and add to. Add to B and stir slowly until dissolved. Add Phase D to BC and homogenize while increasing heat to 80 O C. At 80 O C, add Phase E to BCD and heat to O C while homogenizing. When BCDE and Phase F reach O C, add Phase F to Phases ABCDE under homogenization. Hold temperature and mix for additional 15 minutes. Cool to 45 O C and add Phase G. Continue to cool to 30 O C. Rev 1 ( ) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

22 22 P a g e Waterproof Mascara with Super Durable (SR) Pigments Super Durable (SR) surface treated pigments increase water resistance and adhesion to lashes while reducing smudging. Isododecane Permethyl 99A Presperse Polyethylene A-C Polyethylene 6A Honeywell 1 Euphoria Cerifera (Candelilla) Wax Candelilla Wax Frank B. Ross 4.50 Polyglycerol-3 Diisostearate Prisorine 3700 Croda 0.25 Benzoic acid 0.20 Pentaerythrityl Rosinate Hercules 2.00 Isododecane Permethyl Fluid 99A Presperse 2.00 Zinc Stearate Silica Silylate Zinc Stearate 921-G SIS6962.1M20 Brenntag Phase D Isododecane Iron Oxide (&) Polymethyl silsesquioxane (&) Trimethylsiloxysilicate Permethyl 99A Black Iron Oxide SR Presperse Phase E Petroleum Distillates & Distearyldimonium Hectorite Bentone Gel SS-71 Elementis Combine in a closed vessel and stir slowly until uniform. Combine Phase D and mill using high shear agitation. Combine in a closed vessel. Heat to 95 O C with stirrring until clear. Add with stirring. Add and homogenize until dispersed. Add Phase D and homogenize until dispersed. Add Phase E and homogenize until dispersed. Stir with sidesweep agaiation while cooling to 30 O C. Rev 1 ( ) FORMULA GCA confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

23 For additional product information on s PCS Technology: P a g e 23 Additional Literature Silicone Fluids Stable Inert Media Design and Engineering properties for conventional silicone fluids as well as thermal. Fluorosilicone, hydrophilic and low temperature grades are presented in a 24 page selection guide. The brochure provides data on thermal, rheological, electrical, mechanical and optical properties for silicones. Silicone fluids are available in viscosities ranging from 0.65 to 2,500,000 cst. Reactive Silicones Forging New Polymer Links The 60 pages brochure describes reactive silicones that can be formulated into coatings, membranes, cured rubbers and adhesives for mechanical, optical, electronic and ceramic applications. Information on reactions and cures of silicones as well as physical properties shortens product development time for chemists and engineers A Silicon Compounds: Silanes & Silicones Detailed chemical properties and reference articles for over 1500 compounds. The 608 page catalog of silane and silicone chemistry includes scholarly reviews as well as detailed application information confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are

24 24 P a g e confirmed by the customer., Inc. makes no warranty, expressed or implied that the suggested use infringes on any patent. recommendations are