TYRES, WHEELS AND CASTORS
|
|
- Cordelia Wilcox
- 7 years ago
- Views:
Transcription
1 TYRES & RIMS Worldwide shipments of tyres. Special quantity discounts! Tyres pre-fitted on service exchange rims available. Press facilities available at TVH! 893
2 VIEW OF OUR TYRE WAREHOUSE Quantity discounts We have one of the largest stocks of forklift tyres in Europe. Check our prices! 894
3 STRUCTURE Three compounds Steel ring reinforced base Thicker wear resistant tread Deeper and across tread groove Concave side wall design Square shoulder Wider section Long life span High load capacity High wear resistance Low vibration Low rolling resistance Low energy consumption Good cushion effect More stability Comfortable long distance More adhesion with the road FEATURES APPLICATION Forklift trucks & other industrial vehicles Specially for high frame forklift trucks LUG SIZES : 400x8/ x8/ x12/ x4.5x8/ x6x6/ x8x9/ x9x10/ x10x12/ x50x10/ x15/ x15/ x15/ x65x15/9.75 TRACTION SIZES : 600x9/ x10/ x12/ x15/ x15/ x15/ x7x8/ x9x15/ x10x12/ x16/6.00 LUG TRACTION SOLID CUSHION TYRES TVH OFFERS A LARGE SELECTION OF TYRES & RIMS TYRES PRE-FITTED ON SERVICE EXCHANGE RIMS AVAILABLE TYRE AND RIM ASSEMBLIES AVAILABLE PRESS FACILITIES AVAILABLE AT TVH FOR MORE INFORMATION PLEASE CONTACT OUR SALES DEPARTMENT 895
4 TOTAL SOURCE SOLID CUSHION TYRES SOLID CUSHION TYRES RESILIENT TYRES Wear-resisting tread Cushion rubber centre Hard base CONCAVE SIDE-WALL UNDER LOAD Concave side-wall Steel ring reinforced The resilient tyres are compatible with the standard rims of pneumatic tires. So they can replace pneumatic tyres without changing rims. The tree-compound structure and concave side-wall design avoid overjolt in running. (See above sketch) LUG For fitting on the rim without locking rings LUG AND TRACTION TRACTION TR SUPER RESILIENT CLIP TIRE CLIP The advantages of concave sidewall design provide tyres with comfortable ride and good cushion effect to safeguard the truck from bumping damage. In order to fit the one-piece rim, the tyre base was modified to produce the CLIP tyre. The installation of the tyre with onepiece rim is easier and more convenient. size/rim type dimension (mm) section width outside diam. static radius under load load capacity (kg) counter balance lift trucks up to 10 km/h up to 16 km/h up to 25 km/h load wheels steering wheels load wheels steering wheels load wheels steering wheels approx net weight (kg) 4.00x8/3.00D x8/3.00D* x9/4.00E* x10/5.00F* x12/5.00S* x15/5.50S x12/5.00S x15/6.50T* x4.5x8/3.00D* x6x8/4.33R* x7x8/4.33R* x8x9/6.00E* x9x10/6.50F* x10x12/8.00G* x15/ x15/ x9x15/7.00* x50x10/6.50* x15/7.00* x15/8.00* x65x15/9.75* x10x12/ x16/ * Clip tyres available 896
5 Tyre size NATURAL RUBBER COMPOUNDS IMPROVE TEAR AND CHUNK RESISTANCE. DEEP TREAD FOR LONGER LIFE Increased tread depth, flat tread surface and square shoulder provides improved traction and long even wear. Reinforced sidewall with curb and rim guard protects against sidewall punctures and rim damage. PR Profile Valve RIM (1) recommended Tyre dimensions max in serve (2) Width TR JS2 3.00D/3.25l x41/2-8 8 TR JS x TR JS2 4.33R TR JS2 4.00E x TR JS2 6.00/7.00E TR JS2 5.00F/5.50F TR JS2 5.50F x TR JS2 6.50F TR JS2 3.00D TR TR75A 5.00S TR TR75A 5.00S LUG TR75A 5.00S x TR JS2 8.00G x TR JS2 8.00G TR JS2 4.50E TR JS2 4.50E TR TR75A 5.0/ TR TR75A 6.0/ TR TR77A 6.50/ x TR TR75A TR TR75A 7.0/ TR TR78A TR V /7.50/ TR V / LUG V / SKS TL * SKS TL * O.D. Inflation pressure (bar) +/-15% Load wheel Load capacity (kg) Forklifttrucks up to 25 km/h Steer wheel Static 0 km/h weight (kg) ARMOUR PNEUMATIC TYRES TR LUG SKS * tubeless & reinforced sidewall 897
6 SHOE CLAW - FOR ICE AND SNOW SHOE CLAW - STARTING ASSISTANCE REF 115TA2133 Protects you from slipping Achieves the best safety in walking with the help of a combination of ice-spike and snow chain Fast and easy to use, and can easily be used with shoes Elastic from size 37 to 46 TÜV tested & CE-marked (directive 89/686/EEC) Packed as a pair in an attractive, practical suitcase with synthetic material STARTING ASSISTANCE The universal getaway-aid or starting assistance for passenger-cars, vans and trucks. A plus for security in the extreme situations of winter. safety on ice and snow suitable for all sizes fast and easy mounting system attractive packaging Passenger cars REF 115TA2132 Vans + 4x4 REF 115TA2131 Trucks REF 115TA
7 PRESS-ON TYRES DIMENSIONS 8 1/2 x 4 x 4 9 x 5 x 5 10 x 4 x 6 1/4 10 x 6 x 6 1/4 10 x 4 x 6 1/2 10 x 5 x 6 1/2 10 1/2 x 6 x 5 12 x 4 x 8 12 x 5 x 8 13 x 3 1/2 x 8 13 x 5 x /2 x 5 1/2 x 8 14 x 4 1/2 x 8 14 x 5 x x 5 x 11 1/4 DIMENSIONS 15,5 x 6 x x 5 x 10 1/2 16 x 6 x 10 1/2 16 x 7 x 10 1/2 17 x 5 x 12 1/8 18 x 5 x 12 1/8 18 x 6 x 12 1/8 18 x 7 x 12 1/8 18 x 8 x 12 1/8 18 x 8 x x 9 x x 9 x 12 1/8 21 x 6 x x 7 x x 8 x 15 DIMENSIONS 22 x 6 x x 7 x x 8 x x 9 x x 10 x x 12 x x 12 x x 50 x x 50 x x 80 x x 105 x x 130 x x 90 x x 90 x 280 Also available in non-marking PRESS ON TYRES & SNOW CHAINS 15,5 x 5 x x 9 x x 130 x 305 SNOW CHAINS DIMENSIONS REF 500 x 8 18 x 7 x x 9 21 x 8 x x x 9 x x 10 x x x 10 x TA TA TA TA TA TA TA TA TA5267 Always delivered in pairs! 825 x x x x x 50 x x x x 65 x TA TA TA TA TA TA TA TA
8 MPT BACKHOE & AGRICULTURAL OFF-ROAD TYRES DIMENSIONS PR QUALITY 11L - 15 SL 8 F3 TBLS 10 F3 TBLS 11L - 16 SL 10 F3 TBLS 12 F3 TBLS 10.0 / E5 TBLS 11.5 / E5 TBLS F / IMP 10 I3 TBLS 12, I3 TBLS 16/70-20 (405/70-20) 14 R1 TBLS 15.5 / R1 TBLS LB067 TT (SET) I3 TBLS I3 TBLS L3/E3 TT (SET) IND 12 R4 TBLS 17.5L - 24 IND 10 R4 TBLS 19.5L - 24 IND 12 R4 TBLS I3 TBLS L3/E3 TBLS I3 TBLS L3/E3 TBLS L3/E3 TBLS I3 TBLS L3/E3 TBLS L3/E3 TBLS L3/E3 TBLS L3/E3 TBLS BACKHOE TYRES L3/E3 TBLS L3/E3 TBLS R1 R4 E5 Many more agricultural tyres available upon request! L3 / E3 I3 LB
9 TYRES OFF-ROAD USE (SKIDSTEER LOADERS) WIDE WALL Dimensions PR REF 23 x 8,50 x TA x 8,50 x TA x 16, TA x 16, TA x 17, TA5280 OFF-ROAD TYRES & RUBBER TRACKS RUBBER TRACKS (MINI EXCAVATOR) track width x number of links x pitch length Less damage to roads Less noise Less vibration Tracks for: AIRMANN - ATLAS - CASE - HANIX - HITACHI - IHI - JCB - KOMATSU - KUBOTA - MELROE BOBCAT - NISSAN - PELJOB - SCHAEFF - TAKEUCHI - YANMAR - ETC. Dimensions 200 x 36 x x 40 x x 42 x x 42 x x 43 x x 44 x x 30 x x 31 x x 33 x x 45 x x 72 x 52,5 300 x 84 x 52,5 For inquiries always indicate machine type Possibility for fast delivery! 901
10 TYRES USED ON HIGHLIFTERS AND SCISSORLIFTS TYRES USED ON HIGHLIFTERS AND SCISSORLIFTS 240/55D17.5 TL 12 PR 445/55D19.5 TL 16 PR 31/ NHS TL 8PR 205/75R15 TL 16x5 18x625 TL NHS OTR 16 PR 14x17.5 TL NHS OTR 14 PR 25/ a selection of tyres used on these highlifters and scissorlifts 902
11 REF 107TA5313 TYRE CUTTER Professional Rubber cut V RC400 - Reliable - Modern - Technically refined The pattern redesigner BLADES: (SOLD SEPERATELY) Type Width Depth Qty REF TA5302 round TA TA TA TA TA5307 large TA TA TA TA TA5312 TOOLS FOR TYRES INNER TUBES Dimensions Valve REF For any other type of inner tube, please call us 400 x 8 TR TA x 8 JS 2 107TA x 9 JS 2 107TA x 10 JS 2 107TA x 12 TR75A 107TA x 15 TR75A 107TA x 15 TR75A 107TA x 15 TR75A 107TA x 15 TR77A 107TA x 15 TR77A 107TA x 15 TR78A 107TA x 7 x 8 JS2 107TA x 8 x 9 JS2 107TA x 9 x 10 JS2 107TA x 10 x 12 JS2 107TA5301 PATCH KITS Dimensions REF Quantity Ø 35 mm 107TA5281 (30 pieces) Ø 45 mm 107TA5282 (30 pieces) Ø 54 mm 107TA5283 (30 pieces) Ø 75 mm 107TA5284 (30 pieces) Ø 94 mm 107TA5285 (10 pieces) Ø 116 mm 107TA5286 (10 pieces) Glue (175 gr.) REF 106TA6436 PRESSURE GAUGE PRESSURE GAUGE Michelin licensed REF 107TA7779 Hobby-type REF 107TA7780 Professional pressure gauge bar/psi 903
12 REPAIR KIT FOR TUBES REPAIR KIT FOR TUBES REPAIR PRODUCTS REF 106TA6433 Incl.: 12 x Ø x Ø x Ø x Ø x (74x37) + 4 x (90x45) x 2 x (150x75) + 1 scraper + 2 spares + 1 pressure roller + 1 liquid vulcanizer REF 106TA6434 Incl.: 70 x Ø x Ø x Ø x Ø x (74x37) + 20 x (90x45) + 5 x (150x75) + 3 spare valves to glue + 1 scraper + 1 pressure roller + 1 liquid vulcanizer REPAIR KIT FOR TUBES VULCANIZER LIQUID REF 106TA6435 Incl.: 30 x (50x25) x Ø x Ø x Ø x (74x37) + 1 pressure roller + 1 scraper ml liquid buffer + 1 liquid vulcanizer REF 106TA6436 = 175 gr. TYRE (CARCASS) PATCHES TYRE (CARCASS) PATCHES REF PLY Ø patch qty rating 106TA mm TA mm 5 106TA mm 3 106TA mm TA mm 5 106TA mm 3 REF PLY Ø patch qty rating 106TA mm 5 106TA mm 5 106TA mm 5 SPECIAL CEMENT This is just a small selection of the spares available! For more details, please call us! REF 106TA6447 = 350 gr. 904
13 MINI AIR COMPRESSOR WITH BUILT-IN LIGHT REF 107TA5326 universal application rechargeable voltage 12V supplied with charging lead suitable for cigarette lighter TOOLS FOR TYRES TYRE LEVER TYRE CHISEL REF 107TA5318 Tyre lever Demounting equipment REF 107TA5317 Tyre chisel Demounting equipment VALVE EXTENSIONS REF 107TA5319 Valve stem cover - plastic Dimensions REF 30 mm 107TA mm 107TA mm 107TA mm 107TA mm 123TA9621 GREASE BRUSH TYRE GREASE REF 107TA5316 Content drum of 5kg drum of 10kg REF 107TA TA
14 TYRE PROTECTION TYRE PROTECTION REDUCE TYRE REPAIR TIMES NEW ANTI PUNCTURE Drum 20 L. Pump for drum 20 L. Bottle 1 L. REF 107TA5327 REF 107TA5328 REF 107TA5329 INDISPENSABLE IN EVERY HOME, WORKSHOP, GARAGE AND FARM Puncture Sealant is a non-toxic liquid mixture in the tyre. As the wheel rotates, it is spread around the crown area and coats the inside of the tyre or tube. When a tyre is punctured, sealant is forced instantly into the hole, permanently sealing punctures caused by objects up to 5mm in diameter; equivalent to a 5 inch nail!! The unused sealant remains in the tyre for the next puncture, but it can be easily washed out with water if a conventional repair or remould is to be done. The sealant is introduced into either tubed or tubeless tyres through the valve stem before they are inflated to their recommended operating pressure. Once inside the tyre, it will seal puncture after puncture after puncture, effectively and permanently. This formula is suitable for caravans, boats and camping trailers, tractors, motor cycles, pedal cycles and wheelchairs. It is not a temporary repair product but an effective sealant that creates permanent repairs, eliminating the loss of time and the expense of stripping down the punctured tyre to carry out a traditional repair. Full instructions are sent with each pack of Puncture Sealant and must be referred to before use. Example: l litre bottle treats approx. 2 caravan/trailer tyres or 10 BMX bicycle tyres. up to diameter: 5 mm Suitable for tyres with or without inner tube For filling capacity see next page! 906
15 PUNCTURE SEALANT TYRE DIMENSIONS Litres per tyre 3.00 x 4 1/ x x 4.00 x x 3.50 x x 3.50 x x 4.00 x x 4.00 x x 8 1/ x x 4.00 x x x x x x x 6.00 x x 5.00 x x 6.00 x x 6.50 x x 9 3/ x x 6.50 x x 7.00 x x x 9.50 x x x 8.50 x x / x 10 x x 10 x x x x 8.50 x x x x 8.50 x x 9.00 x x / x x x 19 3/ x x x x x x 16 TYRE DIMENSIONS Litres per tyre 5.50 x x x x 8 x x / x x x x x x x x / x x x x x x x x x x x x x x x x / x x x x x x x x / x x x x x x x x x x x x 15 TYRE DIMENSIONS x x x 12.5 x 18 Litres per tyre 8.30 x x x x x x x 16 Drum 20 L. REF 107TA5327 Pump for drum 20 L. REF 107TA5328 PUNCTURE SEALANT 8.30 x / x x x x 20 Bottle 1 L. REF 107TA
16 WHEEL DOLLY TOOLS FOR TYRES REF 107TA5332 Feature: Polished and chromium coated ram plunger and pump piston protecting seals from abrasion. Heat treated serrated saddle securing lifting contact during operation. Heat treated extension screw providing adjustable lifting height. Built-in safety valve ensuring operating safety against overloading. Patented hydraulic bypass system preventing ram plunger from over-travelling. Load restraining chain securing lifting and lowering safety. Swivel rear castor with height adjustable mechanism offering easy manoeuvrability and maximising operating stability. TYRE DOLLY REF 107TA5330 Facilitates tyre mounting on your forklifts UNIVERSAL FORKLIFT JACK REF 107TA8185 capacity: kg height when lowered: 60 mm max. lift height: 420 mm weight: 31 kg Other jacks available, please see handling chapter AXLE STANDS REF 115TA4429 KIT : jack + stands REF 106TA8633 Repair kit REF 105TA4047 (sold in pairs) Capacity: kg (per pair) Height lowered: 240 mm Max lift height: 420 mm 908
17 TYRE PRESS 120 TONNES TYRE PRESS REF 105TA4052 Specifications capacity max. tyre dimension cylinder total width total height between uprights between tables operating pressure 120 ton 20 inch double-acting 1955 mm 2130 mm 1155 mm 845 mm 250 bar cylinder bore cylinder stroke stroke complete out stroke complete in oil tank electromotor shipping weight 250 mm 400 mm 35 sec 95 sec 30 L 5,5 HP 1400 kg TYRE PRESS 120R TONNES REF 116TA6167 Specifications capacity max. tyre dimension cylinder total width total height between uprights between tables operating pressure 120 ton 20 inch double-acting 1955 mm 2150 mm 1155 mm 845 mm 250 bar cylinder bore cylinder stroke stroke complete out stroke complete in oil tank electromotor shipping weight 250 mm 400 mm 35 sec 95 sec 30 L 5,5 HP 1400 kg 909
18 TYRE PRESS 120 MS TONNES TYRE PRESS REF 116TA6168 Specifications capacity max. tyre dimension cylinder total width total length total height between uprights between tables 120 ton 20 inch double-acting 2140 mm 3150 mm 2400 mm 1155 mm 845 mm operating pressure cylinder bore cylinder stroke stroke complete out stroke complete in oil tank electromotor shipping weight 250 bar 250 mm 400 mm 35 sec 25 sec 50 L 5,5 HP 1900 kg TYRE PRESS 175 TONNES REF 116TA6169 Specifications capacity max. tyre dimension cylinder total width total height between uprights between tables operating pressure 175 ton 24 inch double-acting 2355 mm 2635 mm 1455 mm 1115 mm 350 bar cylinder bore cylinder stroke stroke complete out stroke complete in oil tank electromotor shipping weight 250 mm 500 mm 35 sec 20 sec 82 L 7,5 HP 1800 kg 910
19 TYRE PRESS 200 TONNES REF 116TA6170 Specifications capacity max. tyre dimension cylinder total width total height between uprights between tables operating pressure 200 ton 25 inch single-acting 1960 mm 2180 mm 1580 mm 1140 mm 60/250 bar cylinder bore cylinder stroke stroke complete out stroke complete in oil tank electromotor shipping weight 320 mm 600 mm 37 sec 60 sec 150 L 10 HP 3000 kg TYRE PRESS AND PRESSING CONE PRESSING CONE The pressing cone is placed on top of the wheel as a guidance for the tyre. This way, the tyre is always placed correctly on the wheel. REF wheel size tyre size 116TA D TA x7-8 16x TA x TA x TA TA x x TA x4 1/ x5 25x6 REF wheel size tyre size 116TA6178 all 15 wheels & tyres 116TA6179 for 15 twin-wheels 116TA TA6181 for 20 wheels & tyres 116TA6182 for 20 twin-wheels 116TA TA6184 for 24 twin-wheels 911
20 BASE TOOL ADVANCED BAND TOOL BASE TOOL AND ADVANCED BAND TOOL The base tool is placed under the wheel to protect the wheelhorn. REF wheel size tyre size 107TA TA x7-8 16x TA x8-9 The advanced band tool is used to press the advanced band between the tyre and the wheel. REF wheel size tyre size 116TA TA x TA x TA x TA TA x x TA x x TA x4 1/ x5 25x6 116TA TA TA6201 all 15 wheels all 20 wheels all 24 wheels 107TA5344 all 15 wheels 116TA6193 all 20 wheels 116TA
21 FLANGE TOOL DEMOUNTING TOOL The flange tool is used to push the sidering and the tyre down to free up some space to mount the lockring. REF wheel size tyre size 116TA x7-8 16x x8-9 The demounting tool is used to push the tyre away from the wheel after removal of the lockring. REF 116TA TA TA6208 wheel size all 8 wheels all 10 wheels all 15 wheels FLANGE TOOL AND DEMOUNTING TOOL 107TA x TA x x x4 1/ x5 25x6 116TA TA6210 all 20 wheels all 24 wheels 107TA5348 all 15 wheels 116TA6204 all 20 wheels 116TA
22 DEMOUNTING SUPPORT PRESS-ON TOOL DEMOUNTING SUPPORT AND PRESS-ON TOOL The demounting support is used to support the wheel during demounting. REF wheel size tyre size 116TA x7-8 16x TA x TA x TA x x TA x4 1/ x5 25x6 The press-on tools are used to mount and demount the cushion tyres. REF 116TA wheel size 116TA /4 116TA / TA x 10 1/2 116TA / /8 116TA TA (together with 116TA6224) 116TA / TA (together with 116TA6226) 116TA TA6216 all 15 wheels 116TA6217 all 20 wheels 116TA
23 TECHNICAL DETAIL: RIMS Company: Customer code: Name: Fax number: Truck make: FAX FORM: RIMS Truck type: Serial nr.: rim type: Please indicate type of stud holes D1 = rim dia mm B1 = rim width mm D2 = bore dia mm L1 = flange position mm L2 = flange thickness mm C = pitch circle dia mm G = number of stud holes d =... mm D =... mm spherical d =... mm D =... mm type A: Splitwheel type C: 3-way rim conical double spherical d =... mm D =... mm d =... mm type B: 2-way rim type D: 4-way rim double conical D =... mm d =... mm straight hole 915
24 SPLIT WHEEL RIMS Other dimensions upon request. More than 300 references in stock! Rim size Tyre size Centre Nr. of stud REF hole Ø holes 300D TA D TA D TA R x TA R x TA R x TA E TA E TA E TA E x TA F TA F TA F TA S TA S TA S (Ø 32) 107TA S (Ø 27) 107TA S TA5397 REF per piece. Safety Bolt Hex-Bolt Nut Spring washer Metric TA TA TA TA5357 Metric TA TA TA TA5358 Metric TA TA TA TA5359 Metric TA TA TA TA5360 RING WHEEL Other dimensions upon request. More than 300 references in stock! Rim size Tyre size Centre Nr. of stud REF Used for hole Ø holes 300D x x Ø18,5 107TA5365 STILL 5.00 x Ø13,5 107TA5366 CAT. V25-35D steer axle 15 x 4 1/ Ø16 107TA5367 CLARK DPM R x 8 16 x Ø18,5 107TA5368 STILL R6013 steer / R50 18 x Ø18,5 107TA5369 HYSTER A XL Ø18,5 107TA5370 LINDE H12/ Ø18,5 107TA5371 JUNGHEINRICH Ø18,5 107TA5372 LINDE E12 /15/16,5 324 drive 4.00 E x 9 123,8 5 Ø16 107TA5373 HYSTER / YALE H XL steer axle H XM steer axle 6.50 F x Ø18,5 107TA5374 STILL EFG 2,5 drive Ø18,5 107TA5375 STILL EFG 2,5 drive x x Ø21,5 107TA5376 LINDE H20/25/30D 351 drive Ø21,5 107TA5377 LINDE H20/25/30D 351 drive 6.50 x x Ø32,15 107TA5378 HYSTER H XL 7.00 x x Ø32,15 107TA5379 CATERPILLAR V40-50D, VC60D V40-50E, VC60E 916
25 RIM RINGS TYPE LEMMERZ Rim size Side ring Lock ring Seat ring RIM RINGS 3.00 x 8 107TA TA TA x 8 107TA TA x 9 107TA TA TA x 9 107TA TA TA x TA TA TA x TA TA TA x TA TA TA x TA TA TA x TA TA x TA TA TA x TA TA TA x TA TA TA x TA TA TA x TA TA TA x TA TA TA x TA TA TA5417 CLAMP FITTING Rim size Tyre size REF rim assy Used for (+ rings) 6.50 x TA5407 HYSTER / CLARK 7.00 x R20 107TA5408 CLARK 7.50 x R20 107TA5409 HYSTER / CLARK 8.00 x R20 107TA5410 HYSTER / CLARK x R24 107TA5411 HYSTER / CLARK / KALMAR RINGS FOR CLAMP FITTING Ring Ø REF 15" 107TA " 107TA " 107TA TA5431 ALL RIMS CAN BE DELIVERED COMPLETE WITH TYRES, UPON REQUEST 917
26 CHECKPOINT LOOSE WHEEL NUT INDICATOR CHECKPOINT LOOSE WHEEL NUT INDICATOR AND FAX FORM: WHEEL STUDS Is a simple and cost effective product ensuring, by visual inspection, with total certainty, that a wheel nut has not loosened. Daily walkround checks Fitting CHECKPOINT and adopting a procedural change requiring the driver to do a daily walkround check of the vehicle and/or trailer, or to do a first use inspection when they take over a different or new vehicle, reinforces the safety and roadworthiness inspections and procedures. Fitting CHECKPOINT allows positive daily checking for loose wheel nuts. Fortunately wheel loss occurs infrequently. Tyre, rim, hub and stud damage due to loose wheel nuts happens more often. The fitting of CHECKPOINT facilitates a daily or less frequent, inexpensive wheel nut tightness check and reduces the possibility of avoidable and unbudgeted costs. Sizes, range and colours Checkpoints are available in a range of sizes and fluorescent colours. The range covers a near 100% of the in-use vehicles. The standard colours of fluorescent yellow or red are stock standard. Other colours are available on request. Sizes, application information and other data are available from your local tyre and service provider or the manufacturers. FLUORESCENT YELLOW Spanner width REF 17 mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA6249 example type A type B notched Spanner width REF 27 mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA mm 116TA6260 TECHNICAL DETAIL: WHEEL STUDS Checkpoints indicate no wheel nut movement SAFE Checkpoints indicate a wheel nut has moved DANGER Company: Customer code: Name: Fax number: Truck make: Truck type: Serial nr.: TY:..... Type of wheel bolt (see diagrams) 2 L1:..... Total length of wheel bolt, see diagram (mm) 3 L2:..... Length: shortest thread, see diagram (mm) 4 TA1:..... Type of thread: shortest thread, see diagram (mm) 5 Pm1:..... Pitch (metric) 6 Pi1:..... Pitch (inch) 7 RH/LH:.... Right-hand/left-hand thread 8 L3:..... Length: longest thread, see diagram (mm) 9 TA2:..... Type of thread: longest thread 10 Pm2:..... Pitch (metric) 11 Pi2:..... Pitch (inch) 12 RH/LH:.... Right-hand/left-hand thread 13 L4:..... Length, see diagram (mm) 14 D1:..... Diameter of flange (mm) 15 L5:..... Width of flange, see diagram (mm) 16 D2:..... Diameter of the neck or notched part, see diagram 17 Kw:..... Quality (e.g.: 10.9) 918
27 TECHNICAL DETAIL: WHEEL NUT DOUBLES example: Dimensions: SQUARE PLUG WRENCH size REF 13/16 (X3/4) 122TA /16 (X3/4) 122TA7006 3/4 (X3/4) 122TA7007 Company: Customer code: Name: Fax number: Truck make: Truck type: Serial nr.: L1: Overall length, see picture (mm) 2 TA1: Type of thread exterior 3 Pm: Pitch (metric) 4 Pi: Pitch (inch) 5 RH/LH: Right-hand or left-hand thread 6 TA2: Type of interior thread 7 Pm: Pitch (metric) 8 Pi: Pitch (inch) 9 RH/LH: Right-hand or left-hand thread 10 D1: Diameter, see picture (mm) FAX FORM: WHEEL NUT DOUBLE & WHEELCONES 11 Slw: Spanner width (see picture) 12 Kw: Quality (e.g.: 10.9) TECHNICAL DETAIL: WHEELCONES type A with opening type B without opening type C bent 1 TY... Type of wheel cone (A,B or C) 2 D1... Inner diameter, see picture (in mm) 3 D2... Maximum outer diameter, see picture (in mm) 4 H... Thickness, see picture (in mm) Note! For type C the height is not the total height, but the height of the ring!!! 919
28 WHEEL BOLTS FAX FORM: WHEEL BOLTS Dimensions: TA TA Company: Customer code: Name: Fax number: Truck make: Truck type: Serial nr.: TY: Type, see picture (mm) 2 L1: Length, see pictures 3 TA: Type of thread 4 Pm: Pitch (metric) 5 Pi: Pitch (inch) 6 RH/LH: Right-hand/left-hand thread 7 L2: Length, see pictures (mm) 8 L3: Length, see pictures (mm) 9 D1: Diameter, see pictures (mm) 10 D2: Diameter, see pictures (mm) 11 L Thickness, see pictures (mm) 12 Slw: Spanner width (see picture) 13 Kw: Quality (e.g.: 10.9) If there is a hole in the head, the type becomes DX Type: A Wheel bolt with round head Type: B Wheel bolt with 1 flat side Type: C Wheel bolt with 2 flat sides Type: D (X) Cone shaped wheel bolt If there is a hole in the head, the type becomes EX Type: E (X) Spherical wheel bolt Type: F Wheel bolt: hexagonal head with flange Type: G Wheel bolt with non central head Type: H Wheel bolt with square head 920
29 WHEEL NUTS TA type A spherical head with collar TA type B loose collar FAX FORM: NUTS TA TA type C cone head type D fixed collar Company: Customer code: Name: Fax number: Truck make: Truck type: Serial nr.: TY: Type, see picture (mm) 2 TA: Type of thread 3 RH/LH: Right-hand/left-hand thread 4 Pm: Pitch (metric) 5 Pi: Pitch (inch) 6 Slw: Spanner width 7 H: Total height 8 D Diameter, see picture (mm) 921
30 NOTES NOTES 922
Cat. Sizes to fit Cat Skid Steer Loaders, Wheel Loaders, Telehandlers, Backhoe Loaders, and most other manufacturers models.
Cat tires enhance productivity with design innovations and with the valuable option of purchasing your tires complete as mounted assemblies. Cat dealers and Cat tire retailers stock wheel types, sizes,
More informationPremium Conventional. General Tire Information. High quality; low operating cost. Pneumatic ride in extreme conditions.
Tire and Overview Premium Conventional 185-9932 254 mm (10 419 mm (16.5 185-9933 304 mm (12 419 mm (16.5 High quality; low operating cost. Skid Steer Loader Tires 5436 XD 222-3962 254 mm (10 419 mm (16.5
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationTIRE & TUBE SECTION DEFINITIONS: OVERALL WIDTH SECTION HEIGHT (D) OVERALL DIAMETER (A) SECTION WIDTH (B) NOMINAL RIM DIAMETER (C)
TIRE & TUBE SECTION Knowing some basic facts about tire dimensions and sizes along with a few technical aspects of tire construction can help clear up much of the confusion many people have in understanding
More informationHAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
More informationTires and Wheels. Tires and Wheels. Common Tire Terms. Determing Wheel Offset. Determing Bolt Pattern. Dual Wheel/Rim Spacing
ommon Tire Terms Section : Aspect Ratio: Range: Overall Diameter: Static Radius: Design : width of a tire in millimeters measured on a rim with optimal width. A dimensional relationship of the tire s section
More informationTREAD DESIGNS RADIAL AND BIAS
COLORADO OTR LP TABLE OF CONTENTS INTRODUCTION 3 Industry Standard 3 Application Vehicle Matching Chart 3 GENERAL INFORMATION 4 Structural Diagrams - Radial Tire 4 Definitions 5 Classifications 7 Uses
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationSTEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER
14 14 STEERING HANDLEBAR/FRONT WHEEL/ SCHEMATIC DRAWING ------------------------------------------------- 14-1 SERVICE INFORMATION------------------------------------------------ 14-2 TROUBLESHOOTING-----------------------------------------------------
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More information1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationTIRE BASICS TIRE MOUNTING AND DEMOUNTING
Tire mounting and demounting can be dangerous and should only be performed by a trained tire specialist using proper tools and procedures. Be sure to review your training manual and refer to the RMA wall
More informationHENDERSON WHEEL & WAREHOUSE SUPPLY. 2013 HEAVY DUTY STEEL TRUCK WHEEL CATALOG January 2013
HENDERSON WHEEL & WAREHOUSE SUPPLY 2013 HEAVY DUTY STEEL TRUCK WHEEL CATALOG January 2013 Hub Pilot 8-Hole and 10- Hole Wheels... Page 1 Hub Pilot Duplex Wheels... Page 2 Stud Pilot 6-Hole and 10-Hole
More information1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
More informationDiscPlus DX195 and DX225 Air Disc Brakes
Revised 11-04 Technical Bulletin Revised 1 Technical 11-04 Bulletin DiscPlus DX195 and DX225 Air Disc Brakes Inspection, Installation and Diagnostics Air Disc Brake Inspection Intervals and Procedures
More informationService Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
More information2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
More informationNokian mining tyres. Nokian Heavy Tyres Technical manual / Mining tyres 6.0.1. Mining tyres includes: Product range 6.0 6.8. Nokian Industrial Mine
Nokian Heavy Tyres Technical manual / Mining tyres 6.0.1 Nokian mining tyres The world of mining tyres is rough. Uneven surfaces with sharp edges require tyres that offer extreme durability and high load-bearing
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationTITAN 13 x 2 ½ BRAKES
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationBRAKES AND CABLES BRAKES ALL BRAKE PARTS FROM THE PEDAL TO THE DRUM ARE AVAILABLE FOR ALL TYPES OF FORKLIFTS!
BRAKES ALL BRAKE PARTS FROM THE PEDAL TO THE DRUM ARE AVAILABLE FOR ALL TYPES OF FORKLIFTS! 771 BRAKE PAD KIT BRAKE PAD BRAKE PAD GENERAL VIEW OF OUR RANGE OF BRAKE PARTS BRAKE PAD BRAKE PAD KIT BRAKE
More information5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
More informationINSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationDR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
More informationContinental AG Büttnerstraße 25 D-30165 Hannover
In the year 1998 Barum Continental,Ltd. received the certificate TÜV CERT according to ISO 9001,QS-9000 and VDA 6.1 standards. Companies receiving this certificate meet the highest standards required in
More informationTyre Awareness Training
Tyre Awareness Training Tyre Law Tread depth Tyres on cars, light vans (not exceeding 3,500kg gross weight) and light trailers must have a tread depth of at least 1.6mm across the central three-quarters
More informationPneumatic Tires. Specialist Tires for Maximum Efficiency
Pneumatic Tires Specialist Tires for Maximum Efficiency Radial Pneumatic Tires from Continental Continental Industrial Pneumatic Tires provide comfort on all surfaces and therefore offer the protection
More informationDR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
More informationTable of contents CAT DISC 25. Mower
Mower CAT DISC 25 ( Type PTM 370 : +.. 01001 ) Excerpt from operating manual Nr. 0370B00C.pdf Table of contents Swath Discs... 13 Swath Boards... 13 Safety points... 14 General maintenance hints... 14
More informationDR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
More informationO SL. BPW Original spare parts Air suspensions series O / SL / AL BPW BERGISCHE ACHSEN BPW ORIGINAL SPARE PARTS. BPW Original spare parts
BPW riginal spare parts Air suspensions // BPW BERGISCHE ACHSEN BPW riginal spare parts Air suspensions series / / BPW RIGIN SPARE PARTS BPW riginal spare parts Air suspensions Contents Page Air suspension
More information1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
More informationFront brakes (FN- 3), servicing
j a t Front brakes (FN- 3), servicing 46-1 Front brakes, servicing Note: Install complete repair kit. After replacing brake pads and before moving vehicle, depress brake pedal several times firmly to properly
More information18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)
46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel
More information...and for choosing Rocker BMX, you have chosen wisely. We appreciate the market is slightly clouded with various brands of so called mini bmx.
...and for choosing Rocker BMX, you have chosen wisely. We appreciate the market is slightly clouded with various brands of so called mini bmx. However, Rocker is very different from other brands; it was
More informationM113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS SOUCY TRACK SYSTEM 04-M113-1ENS (SPLIT IDLER) Litho d in Canada 1 04-M113-1ENS
M113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS (SPLIT IDLER) 1 # TABLE OF CONTENTS List of parts and tools................................................3 Installation of complete kit...................................................5
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationOPERATOR S INSTRUCTION MANUAL
POWER JACK MATERIAL MOVER OPERATOR S INSTRUCTION MANUAL WARNING: Serious injury may result if this product is misused. The manufacturer provides the following instructions for use and care of this equipment
More informationDR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
More informationOwner s Manual Read and keep this manual. Patents World Wide
Owner s Manual Read and keep this manual. Patents World Wide S & S Industries, Inc., Sarasota, FL, USA www.trail-gator.com Copyright 2008 All Rights Reserved The following manual is provided to assist
More informationYour New Frog Bike. Congratulations on purchasing a new bike and thank you for choosing Frog!
Your New Frog Bike Congratulations on purchasing a new bike and thank you for choosing Frog! We know that you must be raring to go but before you do there s a few little things still to do to get you up
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationSELF-STEERING AXLE TABLE OF CONTENTS
SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationRating when used as a weight carrying hitch without spring bars:
BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.
More informationRear wheel brakes, servicing. Стр. 1 из 45. Note:
Volkswagen Touareg - Rear wheel brakes, servicing Стр. 1 из 45 46-2 Rear wheel brakes, servicing Rear brakes, FN 44 brake caliper, servicing Note: After replacing brake pads, depress brake pedal firmly
More informationPOSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationUNECE Regulation No 106
UNECE Regulation No 106 Presentation to the GRRF February 2009 meeting ETRTO Delegation 1 Agenda : Scope of the UNECE Regulation No 106 Definitions Markings Requirements Section width Outer diameter Resistance
More informationZAPPY 3 OWNER S MANUAL. Read this manual completely before riding your Electric ZAPPY 3.
ZAPPY 3 OWNER S MANUAL Read this manual completely before riding your Electric ZAPPY 3. TECHNICAL INFORMATION Model No. : ZAPPY 3 Product size Type of motor Motor power Battery type Battery Charger Charging
More informationHorsebox and Trailer Tyres
Horsebox and Trailer Tyres Safe tyres save lives Safe tyres save lives www.tyresafe.org In partnership with The British Horse Society Horsebox and Trailer Tyres and Your Safety in the UK to mix tyres of
More informationDR ALL-TERRAIN FIELD and BRUSH MOWER
DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar
More informationCONGRATULATIONS! TABLE OF CONTENTS. 1 Safety Warnings 2 About Your Wheels 3 Setting Up Your Wheels 7 Care and Cleaning 8 Warranty
WHEEL MANUAL CONGRATULATIONS! Congratulations on your purchase of Oval Concepts Wheels. Developed to perform at a high level, it is important that you follow the operation and maintenance instructions
More information13. REAR WHEEL/BRAKE/SUSPENSION
13. REAR WHEEL/BRAKE/SUSPENSION 13 3.5~4.5kg-m 8.0~10.0kg-m 0.8~1.2kg-m 3.0~4.0kg-m 2.4~3.0kg-m 3.5~4.5kg-m 6.0~8.0kg-m 13-0 13. REAR WHEEL/BRAKE/SUSPENSION 13 REAR WHEEL/BRAKE/SUSPENSION SERVICE INFORMATION...
More informationFord F-250 / 350 2-1/2 Coil Kit. Ford F-250, F350 2011-2015. Part#: 013255
Part#: 013255 Ford F-250 / 350 2-1/2 Coil Kit Ford F-250, F350 2011-2015 Rev.040815 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-279-2135 Web/live chat: www.bds-suspension.com. E-mail: tech@bds-suspension.com
More informationSaferand easierinstallation
EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little
More informationInstallation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab
GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers
More informationRange Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
More informationPVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
More informationFJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions
FJ2 2 Ton Trolley Floor Jack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationOperation manual and Spare parts list 1400 - EL PUMP. November
Operation manual and Spare parts list 1400 - EL PUMP 10 GB November 1 KIMADAN A/S KIMADAN A/S 2 Operational manual and spare parts list 1400 El-pump 15, 20, 25 HP 5 30 kw 6 1. Description.. 3 2. Installation
More informationPEDAL CAR - GO CART ASSEMBLY & OPERATING INSTRUCTIONS
PEDAL CAR - GO CART 42822 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2000 by Harbor Freight Tools. All
More informationWIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928
WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.
More informationPARTS SECTION. Section MF4
PARTS SECTION Section MF4 Wheels, Steering, Axle; hubs, rims, steering pumps, ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE 70243014 180, 185, 190, 190XT 70248233 180, 185, 190, 190XT Radiator
More informationFAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
More informationSLACK PERFORMANCE KARTS
SLACK PERFORMANCE KARTS SET UP GUIDE Thank you for purchasing a 2013 Slack Axiom Chassis. Performance Mfg. strives to provide you with the very best chassis and components on the market today. Your satisfaction
More informationNokian multipurpose tyres
Nokian Heavy Tyres Technical manual / Multipurpose tyres 8.0 Nokian multipurpose tyres Multipurpose tyres includes: 8.1 Testimonials 8.2 8.3 8.4 8.5 8.6 Nokian MPT Agile Tubes and valves Stud recommendations
More informationECONOMIC COMMISSION OF EUROPE (ECE) BRANDING
Much like the U.S. Department of Transportation, The Economic Commission of Europe, or ECE, regulates the manufacturing of vehicle components. To receive ECE branded approval, tires must meet set standards
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationThis little motorcycle has been designed
MITE CYCLE You'll need only an "A" ration to run this midget motorcycle. by R. G. Fisher The Mite Cycle, with its builder, is shown above. A small one-cylinder engine provides the motive power. This little
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationUnit: mm(in) Item Standard value Service limit Axle shaft run out - 0.2(0.008)
Rear Wheel/Brake/Suspension 13. Rear Wheel/Brake/Suspension Service Information 13-1 Troubleshooting 13-2 Rear Wheel 13-3 Rear Cushion 13-4 Rear Swing Arm 13-7 Service Information General Safety If the
More informationFRONT SUSPENSION Click on the applicable bookmark to selected the required model year
FRONT SUSPENSION 33A-2 FRONT SUSPENSION General Information GENERAL INFORMATION 33200010105 The front suspension on 2WD vehicles is an independent suspension system having the double wishbone combined
More information1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.
MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationASSEMBLY MANUAL SE-4S35
Automatic drive ASSEBLY ANUAL SE-4S35 AI-4S35 SG-4R35 Battery box otor unit Inter-4 hub CONTENTS WARNING 1 INSTALLATION CONITIONS Battery box Speed sensor Cable lengths and diameters otor unit Recommended
More informationElectric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60
Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60 Safety To adapt to different operating conditions and customer requirements, all performance parameters are adjustable.
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationINTRODUCTION KINGPIN REPLACEMENT
KINGPIN REPLACEMENT Author: Randy Baumann All information, illustrations and specifications are based on the best information available at the time of publication. The author cannot guarantee the accuracy
More informationVE17 DSP. Model: VE-17DS. Lista Części Polish
Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU
More informationSeries 30000 Hose Reels
Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are
More informationARVINMERITOR UNITIZED FRONT WHEEL HUB INSPECTION AND MAINTENANCE
SERVICE BULLETIN (Also applies to Mack Trucks Australia) NUMBER: SB-423-002 DATE: 8/23/02 MODEL: All with FF981 Front Axle ARVINMERITOR UNITIZED FRONT WHEEL HUB INSPECTION AND MAINTENANCE The ArvinMeritor
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationSECTION 2B WHEEL ALIGNMENT TABLE OF CONTENTS
SECTION 2B WHEEL ALIGNMENT TABLE OF CONTENTS Description and Operation... 2B2 Four Wheel Alignment... 2B2 Toein... 2B2 Caster... 2B2 Camber... 2B2 Diagnostic Information and Procedures... 2B3 Tire Diagnosis...
More information1000-LB. TRAILER JACK OWNER S MANUAL
1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationMKV Golf GTI Rear Brake Service - Replace Pads and Rotors
Page 1 Installation Procedures MKV Golf GTI Rear Brake Service - This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationBR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationCHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Handlebar Assembly NOTE: Part numbers listed are available through MacKissic, Inc. Please add 916- prefix to the part number when ordering.
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
More information!Hydraulic Jacks & Tools
!Hydraulic Jacks & Tools Why hydraulics? Hydraulics is the kind of power transmission which allows the greatest density of forces. There is no other kind of power transmission that will transmit comparable
More informationCLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
More informationOperating Instructions Hand pallet trucks HU Profi. Issue 08.2000
Operating Instructions Hand pallet trucks HU Profi Issue 08.2000 Index 1 Introduction 1.1 Product description 1.2 General information on service and maintenance 1.3 Spare parts 1.4 Dimensions 2 Correct
More informationMachine needle shut-off nozzle type HP
Machine needle shut-off nozzle type HP pneumatically or hydraulically controlled Index of contents Chapter Page Safety instructions... 2 Installation instructions... 3 - Installation steps... 3 Initial
More information