Fully Automatic In-cylinder Workflow Using HEEDS / es-ice / STAR-CD
|
|
- James Lang
- 7 years ago
- Views:
Transcription
1 Fully Automatic In-cylinder Workflow Using HEEDS / es-ice / STAR-CD Simon Fischer Senior ICE Application Support Engineer CD-adapco Nuremberg Office Gerald Schmidt Director/Powertrain - CD-adapco New York Office
2 Outline Introduction and Enabling Technology Workflow and HEEDS Portal Description Underlying Scripts Data Preparation CAD Modification Surface Preparation Automatic Meshing Physical / Numerical Model Setup Running STAR-CD Postprocessing Demo Study: The Optimized Race Engine Further Examples of Successful In-Cylinder and Related Studies
3 Introduction and Enabling Technology HEEDS is a well established MDX tool applicable to many CFD problems Red Cedar Technology recently developed dedicated HEEDS portals for pro-star, es-ice, and STAR-CD making it easier to define workflows for in-cylinder simulation The key enablers of MDX for in-cylinder simulation are robust moving mesh technology and high fidelity physics capability A major focus of es-ice development has been to provide a fully automated robust meshing technology with minimum user intervention STAR-CD provides a big library of state-of the art in-cylinder relevant physics models (from multi-phase to combustion chemistry) This presentation shows the possibility of in-cylinder simulation using a fully automatic HEEDS/es-ice/STAR-CD workflow
4 Workflow Description Generic scripted process of STAR-CCM+ surface preparation, es-ice fully automatic meshing and model setup, pro-star model setup, STAR-CD cluster submit, and es-ice/pro-star postprocessing Minimum User Interaction to Prepare Input Data Process, parameter setting/variation, io-operations, postprocessing managed by HEEDS MDO employing the STAR- CCM+ portal and recent STAR-CD, es-ice, and pro-star portals Meshing and physics parameters and results output managed through HEEDS parameter tagging
5 Workflow Description: Underlying Scripts Generic scripted process of STAR-CCM+ surface preparation, es-ice fully automatic meshing and model setup, pro-star model setup, STAR-CD cluster submit, and es-ice/pro-star postprocessing
6 Workflow Description: Data Preparation Minimum User Interaction to Prepare Input Data Surface preparation in STAR-CCM+ (GeometryPreparation.sim) (Geometry from CAD-Modeller, Imported CAD, Discretized Surface) Naming convention Orientation, Scaling, Valve and Piston position CAD/surface repair (clean CAD, waterproof surface) Deliver Boundary Conditions in appropriately formatted files
7 Workflow Description: HEEDS Process Process, parameter setting/variation, io-operations, postprocessing managed by HEEDS MDO employing the STAR-CCM+ portal and recent STAR-CD, es-ice, and pro- STAR portals Meshing and physics parameters and results output managed through HEEDS parameter tagging
8 Workflow Details: CAD Modification Optional: Direct CAD Design Parameter (if exposed) access through HEEDS s dedicated Portals: here STAR-CCM+ Portal Also available: NX, CATIA, CREO,... Parametrized STAR-CCM+ Geometry Preparation sim-file
9 Workflow Details: Surface Preparation Input STAR-CCM+ Geometry Preparation sim-file Automated Parts Based STAR-CCM+ Surface Remesh using es-ice best practices (Optional) Automated Additional Static Part Volume Meshing Export of es-ice -appropriate.dbs Surface file and additional ccm volume meshes
10 Workflow Details: Automatic Meshing Underlying meshing script featuring latest es-ice automatic meshing technology and best practice User input is limited to a minimum of mesh parameters, e.g. mesh base size, prism layer thickness, etc. No expert knowledge of es-ice template mesh generation is necessary Yet scripted meshing is open source and fully customizable for expert users
11 Workflow Details: Automatic Meshing es-ice scripted meshing HEEDS portal to automatically tag parameters e.g. Make a mesh study Script allowing for Automatic Parameter Tagging to expose parameters to a HEEDS design study (e.g. Make a mesh study)
12 Workflow Details: Automatic Meshing High quality moving mesh with NO user intervention
13 Workflow Details: es-ice Model Setup es-ice scripted model setup Boundary conditions Initial conditions Predefined best practice setup scripts Cold flow Mixture preparation Combustion study All scripts open source and fully customizable All scripts allowing for Automatic Parameter Tagging to expose parameters to a HEEDS design study
14 Workflow Details: pro-star Model Setup pro-star scripted model setup Liquid phase setup for injector boundary conditions, liquid film, and spray physics Predefined best practice setup scripts Cold flow Mixture preparation Combustion study All scripts open source and fully customizable All scripts allowing for Automatic Parameter Tagging to expose parameters to a HEEDS design study
15 Workflow Details: Running STAR-CD Scripted cluster submit including all file handling (copying forth and back), monitoring jobs, etc., handling multiple computational resources
16 Workflow Details: Postprocessing es-ice postprocessing plugin HEEDS portal to automatically tag results Enabling postprocessing in HEEDS for an MDX study Automatic Parameter Tagging to expose Results to HEEDS
17 Workflow Details: Postprocessing Scripted call of pro-star engine animation script
18 Workflow Details: Postprocessing Fully embedded postprocessing in HEEDS
19 Workflow Details: Project Management Fully integrated management of Processes (Cold Flow, MixturePreparation, Combustion) and related Design Exploration Studies (e.g. Single Baseline, Mesh Sensitivity, Geometry Optimization,...) within the HEEDS Environment
20 Demo Study: An Optimized Race Engine The sample study features: Automatic CAD modification through STAR-CCM+ CAD modeler Automatic generation of moving mesh for intake and compression stroke for each design using es-ice Lagrangian spray, wall impingement, liquid film Tracking of fresh air, fuel, and residual through active species Turbulent flow field assessment with STAR-CD Evaluation of engine data Optimization of design through HEEDS Users touch neither the es-ice nor the pro-star GUI, leaving required expertise to a minimum
21 Demo Study: An Optimized Race Engine Design parameters: Piston bowl shape and injector direction Goal: Maximize fuel and maximize turbulence at the ignition point
22 Demo Study: Results
23 Demo Study: Sample Results All engine relevant postprocessing through HEEDS UI Baseline Best Design
24 Demo Study: Performance Model size: ~ 1 mio BDC (1 mm base size), time span 380 degrees crank angle (intake and compression stroke) Total turnaround time per design: ~ 3 hours Preprocessing, meshing, and postprocessing on 1 CPU: ~ 25 min Run on 48 CPUs: ~2.5 h Parallel design assessment through HEEDS Here 4 designs in parallel ~ 45 min per design occupying 192 CPUs 100 designs evaluated in 83 hrs License requirements: 2 es-ice pre/post 4 es-ice run 164 HPC STAR-CD 4 enablestar 5 STAR-CCM+
25 Examples of Successful In-Cylinder and Related Studies Using HEEDS/es-ice/STAR-CD Transient port flow optimization (Pre-Sales demo confidential) Maximize tumble and trapped mass through port design optimization Fully transient: 300 designs in 2 days on 64 cores Diesel piston bowl shape optimization (JLR customer presentation) Presented at last year s European ICE Workshop in Maranello Prechamber gas engine workflow (Support demo for Caterpillar) Gasoline spray calibration in a bomb experiment (Internal training) Calibrate spray break-up model to match experimental properties Automatic testing of es-ice automatic meshing performance (Internal) Extraction of best practices and sensitivity study on meshing parameters for optimum mesh quality Evaluation of DARS combustion libraries in STAR-CD box model (Internal) Tool to explore combustion libraries for auto-ignition and laminar flame speed in CFD operating mode, valuable for library validation Turbulent Jet Ignition (TJI) combustion model validation and best practice study (Internal)
26 The Application of HEEDS MDO to the Optimization of Diesel Piston Bowl Design, Paul Dunkley, Jaguar Land Rover (Presented in Maranello at the European ICE Workshop 2015) Paul D. of JLR stated that he can justify the investment in HEEDS purely because of cost savings due to process automation, even before running one single MDX study. Due to the advancements in es-ice automation transient full cycle es-ice/star- CD in-cylinder MDX is now possible!
27 Piston Bowl Optimization Demo (Internal) SOOT NO
28 Prechamber gas engine workflow (Support demo for Caterpillar)
29 Gasoline spray calibration in a bomb experiment (Internal training) Challenge Calibrate fuel spray of gasoline multi-hole injector for a STAR-CD in-cylinder analysis by using a static spray chamber 4 Calibration parameters as design variables Initial droplet PDF Rosin-Rammler X & Q Spray cone angle and nozzle diameter STAR-CD Spray Model Parameters 2 Calibration objectives Spray penetration length as function of time Droplet size distribution 60mm downstream Automated calibration process 15 min per case 8-10 hours total Impact by HEEDS Curve fitting of two calibration objectives Manpower time savings automatic process does not require manual interaction Final Spray Calibration Curve Fitting by HEEDS
30 Automatic testing of es-ice automatic meshing performance (Internal) Test of meshing technology, extraction of meshing best practices, and sensitivity study on meshing parameters for optimum mesh quality
31 Evaluation of DARS combustion libraries in STAR-CD box model (Internal) Tool to explore combustion libraries for Auto-Ignition and Laminar Flame Speed in CFD operating mode, valuable internal validation tool
32 Turbulent Jet Ignition (TJI) Combustion model validation and best practice study (Internal, ongoing)
33 What Might Be Next? Generic scripts for standard engine studies (meshing, combustion, mixture preparation, etc.) will be delivered in a consistent and version numbered manner together with STAR- CD/es-ice installation Maintenance, bug fixing, and enhancement of these scripts will be managed (e.g. through GIT)
34 Summary HEEDS Portals have been delivered for es-ice/pro-star/star- CD in the latest HEEDS release The new portals enable automated workflows and design exploration to be performed for in-cylinder transient simulations in a convenient, easy, and consistent manner The provided scripts allow for easy start up for new users leaving full flexibility to advanced users and custom studies Users touch neither the es-ice nor the pro-star GUI, leaving required expertise to a minimum
35 Thank you for your attention
CONVERGE Features, Capabilities and Applications
CONVERGE Features, Capabilities and Applications CONVERGE CONVERGE The industry leading CFD code for complex geometries with moving boundaries. Start using CONVERGE and never make a CFD mesh again. CONVERGE
More informationCFD Simulation of HSDI Engine Combustion Using VECTIS
CFD Simulation of HSDI Engine Combustion Using VECTIS G. Li, S.M. Sapsford Ricardo Consulting Engineer s Ltd., Shoreham-by-Sea, UK ABSTRACT As part of the VECTIS code validation programme, CFD simulations
More informationAutomatic HVAC Workflow with STAR-CCM+
CD-adapco STAR European Conference 2011 Automatic HVAC Workflow with STAR-CCM+ Georgios Apostolopoulos, Dr. Christian Merkle, Dr. Wolfram Kühnel Behr GmbH & Co. KG, Germany Automatic HVAC Workflow with
More informationOptimization of Operating Parameters for a 2-stroke DI Engine with KIVA 3V and a Genetic Algorithm Search Technique
Optimization of Operating Parameters for a 2-stroke DI Engine with KIVA 3V and a Genetic Algorithm Search Technique Mark N. Subramaniam and Rolf D. Reitz Engine Research Center, University of Wisconsin-Madison
More informationME6130 An introduction to CFD 1-1
ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
More informationCastNet: GUI environment for OpenFOAM
CastNet: GUI environment for OpenFOAM CastNet is a preprocessing system and job-control system for OpenFOAM. CastNet works with the standard OpenFOAM releases provided by ESI Group as well as ports for
More informationComputational Fluid Dynamics in Automotive Applications
Computational Fluid Dynamics in Automotive Applications Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom FSB, University of Zagreb, Croatia 1/15 Outline Objective Review the adoption of Computational
More informationEXPERIMENTAL VALIDATION AND COMBUSTION CHAMBER GEOMETRY OPTIMIZATION OF DIESEL ENGINE BY USING DIESEL RK
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET) International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 6340(Print), ISSN 0976 6340 (Print) ISSN 0976 6359
More informationThermal Simulation of a Power Electronics Cold Plate with a Parametric Design Study
EVS28 KINTEX, Korea, May 3-6, 2015 Thermal Simulation of a Power Electronics Cold Plate with a Parametric Design Study Boris Marovic Mentor Graphics (Deutschland) GmbH, Germany, boris_marovic@mentor.com
More informationRESEARCH PROJECTS. For more information about our research projects please contact us at: info@naisengineering.com
RESEARCH PROJECTS For more information about our research projects please contact us at: info@naisengineering.com Or visit our web site at: www.naisengineering.com 2 Setup of 1D Model for the Simulation
More informationANSA. www.beta-cae.gr. ANSA for demanding CFD pre-processing. for demanding CFD pre-processing. Model setup. software systems. Morphing & optimization
Model setup - Specification of boundary condition types for ANSYS FLUENT, Star CD/CCM+ and UH-3D. - Complete solution setup for OpenFOAM cases, including initial and boundary condition specification, physical
More informationf o r d e m a n d i n g C F D pre- & post-processing ANSA μετα p i o n e e r i n g software systems www.beta-cae.gr
ANSA μετα p i o n e e r i n g software systems f o r d e m a n d i n g C F D pre- & post-processing TM www.beta-cae.gr ANSA with its powerful functionality provides high efficiency solutions for CFD applications.
More informationUNIVERSITY OF MODENA & REGGIO EMILIA
Luca Montorsi Personal information CURRICULUM VITAE Address Office: via Amendola 2, Pad. Morselli - Telephone Office: +39 0522 523 502 Fax Office: +39 0522 522 609 E-mail Nationality Italian Date of birth
More informationHPC Deployment of OpenFOAM in an Industrial Setting
HPC Deployment of OpenFOAM in an Industrial Setting Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom PRACE Seminar: Industrial Usage of HPC Stockholm, Sweden, 28-29 March 2011 HPC Deployment
More informationCastNet: Modelling platform for open source solver technology
CastNet: Modelling platform for open source solver technology. DHCAE Tools GmbH Address: Friedrich-Ebert-Str. 368, 47800 Krefeld, Germany / Company site: Alte Rather Str. 207 / 47802 Krefeld Phone +49
More informationIntroduction to CFD Analysis
Introduction to CFD Analysis 2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
More informationExpress Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry
More informationDIESEL ENGINE IN-CYLINDER CALCULATIONS WITH OPENFOAM
DIESEL ENGINE IN-CYLINDER CALCULATIONS WITH OPENFOAM 1 Ervin Adorean *, 1 Gheorghe-Alexandru Radu 1 Transilvania University of Brasov, Romania KEYWORDS - diesel, engine, CFD, simulation, OpenFOAM ABSTRACT
More informationInternal Combustion Engines
Lecture-18 Prepared under QIP-CD Cell Project Internal Combustion Engines Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1 Combustion in CI Engine Combustion
More informationTitelmasterformat durch Klicken bearbeiten
Titelmasterformat durch Klicken bearbeiten ANSYS AIM Product simulation for every engineer Erke Wang CADFEM GmbH Georg Scheuerer ANSYS Germany GmbH Christof Gebhardt CADFEM GmbH All products involve multiple
More informationFully Automatic Hex Dominant Mesher. Paul Gilfrin Sharc Ltd
Fully Automatic Hex Dominant Mesher Paul Gilfrin Sharc Ltd Sharc Ltd UK About Sharc Developer of Harpoon Founded in 1997 Distributors of Ensight Engineers with CFD/FEA experience Specialise in the integration
More informationIntroduction to CFD Analysis
Introduction to CFD Analysis Introductory FLUENT Training 2006 ANSYS, Inc. All rights reserved. 2006 ANSYS, Inc. All rights reserved. 2-2 What is CFD? Computational fluid dynamics (CFD) is the science
More informationDear Reader, Quality is an attribute that all OEMs and suppliers covet; so much so, it is highlighted in most corporate mission state ments.
Sales figures of Hybrid Electric Vehicles (HEV) indicate a significant growth of this market segment, especially in the U.S. and Japan. Series production developments are taking place even in Korea and
More informationEngine Heat Transfer. Engine Heat Transfer
Engine Heat Transfer 1. Impact of heat transfer on engine operation 2. Heat transfer environment 3. Energy flow in an engine 4. Engine heat transfer Fundamentals Spark-ignition engine heat transfer Diesel
More informationEnhancing the Design of Electric Machines through the Interaction of Software Tools. Markus Anders Electric machine sector manager CD-adpaco
Enhancing the Design of Electric Machines through the Interaction of Software Tools Markus Anders Electric machine sector manager CD-adpaco Outline Part I: SPEED and STAR-CCM+ Enhancing the thermal design
More informationAutomated moving mesh techniques in CFD
Unione Europea Repubblica Italiana Regione Autonoma della Sardegna Automated moving mesh techniques in CFD Application to fluid-structure interactions and rigid motions problems MANUELA PROFIR manuela@crs4.it
More informationHYBRID ROCKET TECHNOLOGY IN THE FRAME OF THE ITALIAN HYPROB PROGRAM
8 th European Symposium on Aerothermodynamics for space vehicles HYBRID ROCKET TECHNOLOGY IN THE FRAME OF THE ITALIAN HYPROB PROGRAM M. Di Clemente, R. Votta, G. Ranuzzi, F. Ferrigno March 4, 2015 Outline
More informationPushing the limits. Turbine simulation for next-generation turbochargers
Pushing the limits Turbine simulation for next-generation turbochargers KWOK-KAI SO, BENT PHILLIPSEN, MAGNUS FISCHER Computational fluid dynamics (CFD) has matured and is now an indispensable tool for
More informationOverset Grids Technology in STAR-CCM+: Methodology and Applications
Overset Grids Technology in STAR-CCM+: Methodology and Applications Eberhard Schreck, Milovan Perić and Deryl Snyder eberhard.schreck@cd-adapco.com milovan.peric@cd-adapco.com deryl.snyder@cd-adapco.com
More informationCustomer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.
Lecture 2 Introduction to CFD Methodology Introduction to ANSYS FLUENT L2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions,
More informationComputational Fluid Dynamic Modeling Applications
Computational Fluid Dynamic Modeling Applications Canadian Heavy Oil Conference Dr. Marvin Weiss What is CFD Computational Fluid Dynamics Colorful Fluid Dynamics Colors For Directors Carefully Fitted Data
More informationPOLITECNICO DI MILANO Department of Energy
1D-3D coupling between GT-Power and OpenFOAM for cylinder and duct system domains G. Montenegro, A. Onorati, M. Zanardi, M. Awasthi +, J. Silvestri + ( ) Dipartimento di Energia - Politecnico di Milano
More informationA Common Engine Platform for Engine LES Development and Validation
A Common Engine Platform for Engine LES Development and Validation Volker Sick, D. Reuss, P. Abraham, A. Alharbi, O. Almagri, & H. Chen University of Michigan, Ann Arbor, MI, USA Chris Rutland & Y. Zhang,
More informationSteady Flow: Laminar and Turbulent in an S-Bend
STAR-CCM+ User Guide 6663 Steady Flow: Laminar and Turbulent in an S-Bend This tutorial demonstrates the flow of an incompressible gas through an s-bend of constant diameter (2 cm), for both laminar and
More informationCCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future
. CCTech TM Simulation is The Future ICEM-CFD & FLUENT Software Training Course Brochure About. CCTech Established in 2006 by alumni of IIT Bombay. Our motive is to establish a knowledge centric organization
More informationTechnology Update: Workbench, Geometry, Meshing, Workflow. ANSYS Users Group Meeting Prague, 2011
Technology Update: Workbench, Geometry, Meshing, Workflow ANSYS Users Group Meeting Prague, 2011 1 Andreas Kolms Hannover 2 Agenda Workbench Geometry Meshing Workflow 3 The Path to Robust Design Optimization
More informationFloEFD TM. Concurrent CFD for Creo Parametric. www.mentor.com
FloEFD TM Concurrent CFD for Creo Parametric M e c h a n i c a l a n a l y s i s Overview FloEFD for Creo Parametric is the only fully embedded Computational Fluid Dynamics (CFD) tool for Creo Parametric.
More information2013 Code_Saturne User Group Meeting. EDF R&D Chatou, France. 9 th April 2013
2013 Code_Saturne User Group Meeting EDF R&D Chatou, France 9 th April 2013 Thermal Comfort in Train Passenger Cars Contact For further information please contact: Brian ANGEL Director RENUDA France brian.angel@renuda.com
More informationAdvanced discretisation techniques (a collection of first and second order schemes); Innovative algorithms and robust solvers for fast convergence.
New generation CFD Software APUS-CFD APUS-CFD is a fully interactive Arbitrary Polyhedral Unstructured Solver. APUS-CFD is a new generation of CFD software for modelling fluid flow and heat transfer in
More informationCOMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES
ME469B - Spring 2007 COMPUTATIONAL FLUID DYNAMICS USING COMMERCIAL CFD CODES Gianluca Iaccarino Dept. Mechanical Engineering Bldg. 500 RM 204 (RM500-I) Ph. 650-723-9599 Email: jops@stanford.edu ME469B/1/GI
More informationAerodynamic Simulation. Viscous CFD Code Validation
Aerodynamic Simulation using STAR-CCM+ Viscous CFD Code Validation 19 March 2013 CD-adapco STAR-CCM+ Code Validation Efforts Kenneth E. Xiques CRM Solutions 4092 Memorial Pkwy SW, Suite 200 Huntsville,
More informationTurbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine
HEFAT2012 9 th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 16 18 July 2012 Malta Turbulence Modeling in CFD Simulation of Intake Manifold for a 4 Cylinder Engine Dr MK
More informationThis tutorial provides a recipe for simulating L
Pipe Flow Tutorial for STAR-CCM+ ME 448/548 February 5, 2014 Gerald Recktenwald gerry@me.pdx.edu 1 Overview This tutorial provides a recipe for simulating laminar flow in a pipe with STAR- L CCM+. The
More informationSet up and solve a transient problem using the pressure-based solver and VOF model.
Tutorial 18. Using the VOF Model This tutorial was run using ANSYS FLUENT 12.1. The results have been updated to reflect the change in the default setting of node-based smoothing for the surface tension
More informationIntegration of Multi-disciplinary Visualization Platform with a Decision Support System for MD Nastran
Integration of Multi-disciplinary Visualization Platform with a Decision Support System for MD Nastran Prasad Mandava, Visual Collaboration Technologies Inc., Wichai Cheva, Toyota Technical Center (USA),
More informationDiesel injection, ignition, and fuel air mixing
Diesel injection, ignition, and fuel air mixing 1. Fuel spray phenomena. Spontaneous ignition 3. Effects of fuel jet and charge motion on mixingcontrolled combustion 4. Fuel injection hardware 5. Challenges
More information3. Prescribe boundary conditions at all boundary Zones:
CFD ANALYSIS OF CHANGE IN SHAPE OF SUCTION MANIFOLD TO IMPROVE PERFORMANCE OF THE CENTRIFUGAL PUMP ABSTRACT Mr. Suraj K. Patil PG Student, Department of Mechanical Engineering /BIGCE, Solapur University,
More informationSimulation Strategy and Analysis of a Two-Cylinder Two Stroke Engine Using CFD Code Fluent
EASC 009 Simulation Strategy and Analysis of a Two-Cylinder Two Stroke Engine Using CFD Code Fluent Dalibor Jajcevic, Raimund A. Almbauer Christian Doppler Laboratory Thermodynamics of Reciprocating Engines,
More informationComputational Fluid Dynamics
Aerodynamics Computational Fluid Dynamics Industrial Use of High Fidelity Numerical Simulation of Flow about Aircraft Presented by Dr. Klaus Becker / Aerodynamic Strategies Contents Aerodynamic Vision
More informationModeling of Diesel Fuel Spray Formation in OpenFOAM
Modeling of Diesel Fuel Spray Formation in OpenFOAM Anne Kösters (Chalmers Univ of Technology) Anders Karlsson (Volvo Technology Corporation) Motivation Sprays are involved in many applications (internal
More informationCFD Modeling of a Turbo-charged Common-rail Diesel Engine
JSAE 20139103 / SAE 2013-32-9103 CFD Modeling of a Turbo-charged Common-rail Diesel Engine Guan-Jhong Wang, Chia-Jui Chiang, Yu-Hsuan Su National Taiwan University of Science and Technology, Taiwan Yong-Yuan
More informationEngine Efficiency and Power Density: Distinguishing Limits from Limitations
Engine Efficiency and Power Density: Distinguishing Limits from Limitations Chris F. Edwards Advanced Energy Systems Laboratory Department of Mechanical Engineering Stanford University Exergy to Engines
More informationThe Ogunmuyiwa Engine Cycle
The Ogunmuyiwa Engine Cycle Dapo Ogunmuyiwa M.Sc VDI Chairman / CEO Tel: (+49) 162 961 04 50 E-mail: Dapo.Ogunmuyiwa@omttec.eu Ogunmuyiwa Motorentechnik GmbH Technologie- und Gruenderzentrum (TGZ) Am Roemerturm
More informationINTERNAL COMBUSTION (IC) ENGINES
INTERNAL COMBUSTION (IC) ENGINES An IC engine is one in which the heat transfer to the working fluid occurs within the engine itself, usually by the combustion of fuel with the oxygen of air. In external
More informationAeronautical Testing Service, Inc. 18820 59th DR NE Arlington, WA 98223 USA. CFD and Wind Tunnel Testing: Complimentary Methods for Aircraft Design
Aeronautical Testing Service, Inc. 18820 59th DR NE Arlington, WA 98223 USA CFD and Wind Tunnel Testing: Complimentary Methods for Aircraft Design Background Introduction ATS Company Background New and
More informationCFD Applications using CFD++ Paul Batten & Vedat Akdag
CFD Applications using CFD++ Paul Batten & Vedat Akdag Metacomp Products available under Altair Partner Program CFD++ Introduction Accurate multi dimensional polynomial framework Robust on wide variety
More informationTHE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA
THE CFD SIMULATION OF THE FLOW AROUND THE AIRCRAFT USING OPENFOAM AND ANSA Adam Kosík Evektor s.r.o., Czech Republic KEYWORDS CFD simulation, mesh generation, OpenFOAM, ANSA ABSTRACT In this paper we describe
More informationEFC Topic 4.2 Simulation-to-Simulation Benchmarking (LES, RANS) Objectives of the 4.2
EFC Topic 4.2 Simulation-to-Simulation Benchmarking (LES, RANS) Presented by Cecile PERA (IFPEN) Objectives of the 4.2 Summarize: some guidelines for engine simulations 1 Introduction Spray Spark ignition
More informationHow To Run A Cdef Simulation
Simple CFD Simulations and Visualisation using OpenFOAM and ParaView Sachiko Arvelius, PhD Purpose of this presentation To show my competence in CFD (Computational Fluid Dynamics) simulation and visualisation
More informationTwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations
TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations 05.06.2014 Dipl.-Ing. Jan Hesse, Dr. Andreas Spille-Kohoff CFX Berlin Software GmbH Karl-Marx-Allee 90 A 10243
More informationCFD Analysis of a MILD Low-Nox Burner for the Oil and Gas industry
CFD Analysis of a MILD Low-Nox Burner for the Oil and Gas industry Alessandro Atzori Supervised by: Vincent Moreau Framework: Industria 2015 Bill on competitiveness and industrial policy, approved on 22
More informationMULTIDISCIPLINARY DESIGN OPTIMIZATION (MDO) USING ANSA/µETA POSTPROCESSOR AND ISIGHT
MULTIDISCIPLINARY DESIGN OPTIMIZATION (MDO) USING ANSA/µETA POSTPROCESSOR AND ISIGHT Frederic KRABCHI Simulia, France Abstract: Increasingly, industries are using process automation tools in simulation-based
More informationSimulation-News in Creo 1.0. Urs Simmler MCAD Simulation Specialist
Simulation-News in Creo 1.0 Urs Simmler MCAD Simulation Specialist MECHANICA-News in Creo 1.0 Urs Simmler MCAD Simulation Specialist Creo Simulation App Standalone Mechanica Application > Dedicated User
More informationBest Practices Workshop: Heat Transfer
Best Practices Workshop: Heat Transfer Overview This workshop will have a mixed format: we will work through a typical CHT problem in STAR-CCM+, stopping periodically to elucidate best practices or demonstrate
More informationIntroductory FLUENT Training
Chapter 10 Transient Flow Modeling Introductory FLUENT Training www.ptecgroup.ir 10-1 Motivation Nearly all flows in nature are transient! Steady-state assumption is possible if we: Ignore transient fluctuations
More informationParallel Session III-B: Nuclear and Renewable Energy. Wind Farm Simulations Dennis Nagy and Mike Dombroski
Parallel Session III-B: Nuclear and Renewable Energy Wind Farm Simulations Dennis Nagy and Mike Dombroski Wind Energy Engineering: A Range of Important Roles for 3-D Simulation Focus of this Presentation:
More informationLecture 16 - Free Surface Flows. Applied Computational Fluid Dynamics
Lecture 16 - Free Surface Flows Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (2002-2006) Fluent Inc. (2002) 1 Example: spinning bowl Example: flow in
More informationComputational Modeling of Wind Turbines in OpenFOAM
Computational Modeling of Wind Turbines in OpenFOAM Hamid Rahimi hamid.rahimi@uni-oldenburg.de ForWind - Center for Wind Energy Research Institute of Physics, University of Oldenburg, Germany Outline Computational
More informationCombustion Engine Optimization
Combustion Engine Optimization Stefan Jakobsson, Muhammad Saif Ul Hasnain,, Robert Rundqvist, Fredrik Edelvik, Michael Patriksson Mattias Ljungqvist Volvo Cars, Johan Wallesten and Dimitri Lortet Volvo
More informationHow is EnSight Uniquely Suited to FLOW-3D Data?
How is EnSight Uniquely Suited to FLOW-3D Data? July 5, 2011 figure 1. FLOW-3D model of Dam visualized with EnSight If you would like to know how CEI s EnSight offers you more power than other postprocessors
More informationFLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH
FLUX / GOT-It Finite Element Analysis of electromagnetic devices Maccon GmbH Entwurfswerkzeuge für elektrische Maschinen MACCON GmbH 09/04/2013 1 Flux software Modeling electromagnetic and thermal phenomena
More informationInvestigation and Application of Multi-Disciplinary Optimization for. Automotive Body-in-White Development
Investigation and Application of Multi-Disciplinary Optimization for Abstract: Automotive Body-in-White Development Allen Sheldon*, Edward Helwig*, Yong-Bae Cho** * Honda R&D Americas, Inc. ** CSM Software,
More informationMECHANICAL ENGINEERING DEPARTMENT
FACULTY OF ENGINEERING SHREE SARASWATI EDUCATION SANSTHAN S GROUP OF INSTITUTIONS AT PO, RAJPUR TA. KADI, DIST. MEHSANA MECHANICAL ENGINEERING DEPARTMENT SYLLABUS FOR MID SEM EXAMINATON EVEN SEM 2015 SUBJECT
More informationEffects of Direct Water Injection on DI Diesel Engine Combustion
-1-938 Effects of Direct Water Injection on DI Diesel Engine Combustion F. Bedford and C. Rutland Engine Research Center, UW Madison Copyright Society of Automotive Engineers, Inc. P. Dittrich, A. Raab
More informationAutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook
2D CAD Introduction Isometric drawings File management Perspective drawings Orthographic drawings Annotations and Dimensions View management Team work Display management Layout management Layer management
More informationHow To Program A Laser Cutting Robot
Robotics ABB Robotics Laser Cutting Software High precision laser cutting made easy - Greater manufacturing flexibility at lower capital investment Robotic laser cutting Overview Allows for the increased
More informationREDESIGN OF THE INTAKE CAMS OF A FORMULA STUDENT RACING CAR
FISITA2010-SC-P-24 REDESIGN OF THE INTAKE CAMS OF A FORMULA STUDENT RACING CAR Sándor, Vass Budapest University of Technology and Economics, Hungary KEYWORDS valvetrain, camshaft, cam, Formula Student,
More informationCFD simulations of flow over NASA Trap Wing Model
CFD simulations of flow over NASA Trap Wing Model Andy Luo Swift Engineering Pravin Peddiraju, Vangelis Skaperdas BETA CAE Systems Introduction A cooperative study was undertaken by BETA and Swift Engineering
More informationModel of a flow in intersecting microchannels. Denis Semyonov
Model of a flow in intersecting microchannels Denis Semyonov LUT 2012 Content Objectives Motivation Model implementation Simulation Results Conclusion Objectives A flow and a reaction model is required
More informationNumerical Calculation of Laminar Flame Propagation with Parallelism Assignment ZERO, CS 267, UC Berkeley, Spring 2015
Numerical Calculation of Laminar Flame Propagation with Parallelism Assignment ZERO, CS 267, UC Berkeley, Spring 2015 Xian Shi 1 bio I am a second-year Ph.D. student from Combustion Analysis/Modeling Lab,
More informationFuel Requirements for HCCI Engine Operation. Tom Ryan Andrew Matheaus Southwest Research Institute
Fuel Requirements for HCCI Engine Operation Tom Ryan Andrew Matheaus Southwest Research Institute 1 HCCI Fuel & Air Charge Undergoes Compression Spontaneous Reaction Throughout Cylinder Low Temperature
More informationMultiphase Flow - Appendices
Discovery Laboratory Multiphase Flow - Appendices 1. Creating a Mesh 1.1. What is a geometry? The geometry used in a CFD simulation defines the problem domain and boundaries; it is the area (2D) or volume
More informationPrinciples of Engine Operation
Internal Combustion Engines ME 422 Yeditepe Üniversitesi Principles of Engine Operation Prof.Dr. Cem Soruşbay Information Prof.Dr. Cem Soruşbay İstanbul Teknik Üniversitesi Makina Fakültesi Otomotiv Laboratuvarı
More informationPulverized Coal Pipe Testing and Balancing
Pulverized Coal Pipe Testing and Balancing By Richard F. (Dick) Storm, PE The first step in optimizing combustion system performance is balancing the air and fuel flowing through each of the plant's coal
More informationUniversity Turbine Systems Research 2012 Fellowship Program Final Report. Prepared for: General Electric Company
University Turbine Systems Research 2012 Fellowship Program Final Report Prepared for: General Electric Company Gas Turbine Aerodynamics Marion Building 300 Garlington Rd Greenville, SC 29615, USA Prepared
More informationInternal Combustion Optical Sensor (ICOS)
Internal Combustion Optical Sensor (ICOS) Optical Engine Indication The ICOS System In-Cylinder Optical Indication 4air/fuel ratio 4exhaust gas concentration and EGR 4gas temperature 4analysis of highly
More informationPerformance Analysis of a. for a Diesel Engine
12 th GT-Suite User s Conference Performance Analysis of a Decompression Brake System for a Diesel Engine Ivan Miguel Trindade Vinicius J. M. Peixoto MWM International Motores November, 10th 2008 Presentation
More informationSimulation of a Hydraulic Cam Phaser
Simulation of a Hydraulic Cam Phaser Motion with 6-DOF morphing and Overset mesh Thomas Fischer, Daimler AG Berlin Plant Kai Fellmann, Daimler AG Berlin Plant Vienna, 03/17/2014 Organization 1. Introduction
More informationENGINEERING SIMULATION TAKES FLIGHT
ENGINEERING SIMULATION TAKES FLIGHT Parker Aerospace uses ANSYS technology to reduce time and costs as well as risk in the design of aircraft systems. By Carsten Mehring, CFD Technology Lead, Parker Aerospace,
More informationHow To Create A Cdf Optimisation System
ADVANCED ENGINEERING 4(2010)2, ISSN 1846-5900 INTERFACES FOR EMBEDDING CFD OPTIMISATION WORKFLOWS INTO THE PRODUCT DEVELOPMENT PROCESS Todorov, G.; Ovcharova, J.; Romanov, B. & Kamberov, K. Abstract: The
More informationA. Hyll and V. Horák * Department of Mechanical Engineering, Faculty of Military Technology, University of Defence, Brno, Czech Republic
AiMT Advances in Military Technology Vol. 8, No. 1, June 2013 Aerodynamic Characteristics of Multi-Element Iced Airfoil CFD Simulation A. Hyll and V. Horák * Department of Mechanical Engineering, Faculty
More informationIntroduction to ANSYS
Lecture 3 Introduction to ANSYS Meshing 14. 5 Release Introduction to ANSYS Meshing 2012 ANSYS, Inc. March 27, 2014 1 Release 14.5 Introduction to ANSYS Meshing What you will learn from this presentation
More informationFUNDAMENTALS OF ENGINEERING THERMODYNAMICS
FUNDAMENTALS OF ENGINEERING THERMODYNAMICS System: Quantity of matter (constant mass) or region in space (constant volume) chosen for study. Closed system: Can exchange energy but not mass; mass is constant
More informationIntroductory Study of Variable Valve Actuation for Pneumatic Hybridization
2007-01-0288 Introductory Study of Variable Valve Actuation for Pneumatic Hybridization Copyright 2007 SAE International Sasa Trajkovic, Per Tunestål and Bengt Johansson Division of Combustion Engines,
More informationNOZZLE MOMENTUM EFFICIENCY DEFINITION, MEASUREMENT AND IMPORTANCE FOR DIESEL COMBUSTION
Paper ID ILASS8-6- Paper ID ILASS8-A33 ILASS 28 Sep. 8-, 28, Como Lake, Italy NOZZLE MOMENTUM EFFICIENCY DEFINITION, MEASUREMENT AND IMPORTANCE FOR DIESEL COMBUSTION Godfrey Greeves*, Gavin Dober*, Simon
More informationInitial Design and Optimization of Turbomachinery with CFturbo and optislang
Initial Design and Optimization of Turbomachinery with CFturbo and optislang Sebastian Stübing, Gero Kreuzfeld, Ralph-Peter Müller (CFturbo) Stefan Marth, Michael Schimmelpfennig (Dynardo) page 1/21 Contents
More informationSoftware support. Overview Process step: Selection and sizing. Process step: Engineering design. Process step: Ordering in the Online Shop
Overview Process step: Selection and sizing New functions: New product finder for drives with linear guide New delivery class in the core product range Process step: Engineering design New functions: New
More informationSIMULATION MODEL OF THE SINGLECYLINDER COMBUSTION ENGINE MZ125
SIMULATION MODEL OF THE SINGLECYLINDER COMBUSTION ENGINE MZ125 Pavel Dresler 1, Michal Richtář 2 Summary: The use of one-dimensional CFD engine simulation is an essential tool to the engine development
More informationDIMEG - University of L Aquila ITALY EXPERIMENTAL ACTIVITY ENGINE LABORATORY
DIMEG - University of L Aquila ITALY EXPERIMENTAL ACTIVITY ENGINE LABORATORY Torre di Raffreddamento Bilan cia Combustibile DIMEG:ENGINE LABORATORY PLANTS Torre di Raffreddamento P C o o z l z d o P C
More informationHydrogen Addition For Improved Lean Burn Capability of Slow and Fast Burning Natural Gas Combustion Chambers
-- Hydrogen Addition For Improved Lean Burn Capability of Slow and Fast Burning Natural Gas Combustion Chambers Per Tunestål, Magnus Christensen, Patrik Einewall, Tobias Andersson, Bengt Johansson Lund
More information