Panasonic FP. HMI Setting: Device Address:

Transcription

1 Panasonic FP Supported Series: NAIS (Matsushita) FP series include FP-X, FP-Σ, FP0, FP1, FP2, FP2SH, FP10SH and FP3 Ethernet support FP-X with AFPX-COM5. Website: HMI Setting: Parameters Recommended Options Notes PLC type Panasonic FP PLC I/F RS232 RS232/RS485 Baud rate , 19200, 38400, Data bits 8 7 or 8 Parity Odd Even, Odd, None Stop bits 1 1 or 2 PLC sta. no Must match the PLC port setting. FP3 must set to 0. *Support communications between HMI and PLC in pass-through mode *Set LW-9903 to 2 to enhance the speed of download/upload PLC program in pass-through mode Device Address: Bit/Word Device type Format Range Memo B X DDDDh 0 ~ 9999f Input (X) B Y DDDDh 0 ~ 9999f Output (Y) B R DDDDh 0 ~ 9999f Internal Relay (R) B L DDDD 0 ~ 9999 Link Relay (L) B L_Bit DDDDh 0 ~ 9999f B T DDDD 0 ~ 9999 Timer (T) B C DDDD 0 ~ 9999 Counter (C) W SV DDDD 0 ~ 9999 Timer/Counter Set Value (SV) W EV DDDDD 0 ~ Timer/Counter Elapse Value (EV) W DT DDDDD 0 ~ Data Register (DT) W LD DDDD 0 ~ 8447 Link Register (LD) W WX DDDD 0 ~ 9999 Input (WX) (read only) W WY DDDD 0 ~ 9999 Output (WY) W WR DDDD 0 ~ 9999 Internal Relay (WR)

2 Bit/Word Device type Format Range Memo W WL DDDD 0 ~ 9999 Link Relay (WL) W FL DDDDD 0 ~ File Register (FL) PLC Connection Guide Wiring Diagram: FP0, FP2, FP2SH, FPM CPU : 9P D-Sub to 5P Mini-DIN COM3 RS232 9P 2 RX 8 RX 2 TXD 3 TX 7 TX 3 RXD 5 GND 2 RX 2 TXD 3 TX 3 RXD 2 RX 2 TXD 3 TX 3 RXD COM2 RS232 9P COM3 RS232 9P D-Sub 2 RX 6 RX 8 RX 2 TXD 3 TX 4 TX 7 TX 3 RXD 5 GND 5 GND

3 9 RX 2 TXD 6 TX 3 RXD FP0 CPU : 9P D-Sub to 3P Terminal: COM3 RS232 9P RS232 3P Terminal 2 RX 8 RX S 3 TX 7 TX R 5 GND 5 GND G RS232 3P Terminal 2 RX S 3 TX R 5 GND G RS232 3P Terminal 2 RX S 3 TX R 5 GND G COM2 RS232 9P COM3 RS232 9P RS232 3P Terminal D-Sub 2 RX 6 RX 8 RX S 3 TX 4 TX 7 TX R 5 GND 5 GND 5 GND G

4 RS232 3P Terminal 9 RX S 6 TX R 5 GND G COM3 RS232 9P RS232 2 RX 8 RX 2 TXD 3 TX 7 TX 3 RXD 5 GND RS232 2 RX 2 TXD 3 TX 3 RXD

5 RS232 2 RX 2 TXD 3 TX 3 RXD COM2 RS232 9P COM3 RS232 9P RS232 D-Sub 2 RX 6 RX 8 RX 2 TXD 3 TX 4 TX 7 TX 3 RXD 5 GND 5 GND RS232 9 RX 2 TXD 6 TX 3 RXD

6 FP1 CPU : 9P D-Sub to 8P MiniDIN 1 RX- 2 TXDA 2 RX+ 5 TXDB 3 TX- 3 RXDA 4 TX+ 6 RXDB COM2 RS485 4W 9P 7 RX- 2 TXDA 6 RX+ 5 TXDB 9 TX- 3 RXDA 8 TX+ 6 RXDB COM2 RS485 4W 1 RX- 1 RX- 2 TXDA 2 RX+ 2 RX+ 5 TXDB 3 TX- 3 TX- 3 RXDA 4 TX+ 4 TX+ 6 RXDB 5 GND 1 RX- 2 TXDA 2 RX+ 5 TXDB 3 TX- 3 RXDA 4 TX+ 6 RXDB

7 9P 1 RX- 2 TXDA 2 RX+ 5 TXDB 3 TX- 3 RXDA 4 TX+ 6 RXDB FP3 CPU : 9P D-Sub to 15P D-Sub 1 RX- 9 TXDA 2 RX+ 2 TXDB 3 TX- 10 RXDA 4 TX+ 3 RXDB CTS COM2 RS485 4W 9P 7 RX- 9 TXDA 6 RX+ 2 TXDB 9 TX- 10 RXDA 8 TX+ 3 RXDB CTS

8 COM2 RS485 4W 1 RX- 1 RX- 9 TXDA 2 RX+ 2 RX+ 2 TXDB 3 TX- 3 TX- 10 RXDA 4 TX+ 4 TX+ 3 RXDB 5 GND CTS 1 RX- 9 TXDA 2 RX+ 2 TXDB 3 TX- 10 RXDA 4 TX+ 3 RXDB CTS

9 9P 1 RX- 9 TXDA 2 RX+ 2 TXDB 3 TX- 10 RXDA 4 TX+ 3 RXDB CTS Driver Version: Version Date Description V1.80 Apr/09/2010 Added registers: FL