Computer-aided web-based application to modular plant design
|
|
- Luke Lane
- 8 years ago
- Views:
Transcription
1 20 th European Symposium on Computer Aided Process Engineering ESCAPE20 S. Pierucci and G. Buzzi Ferraris (Editors) 2010 Elsevier B.V. All rights reserved. Computer-aided web-based application to modular plant design Łukasz Hady, Günter Wozny Berlin Institute of Technology, Chair of Process Dynamics and Operation, Sekr. KWT-9, Str. des 17. Juni 135, D Berlin, Abstract In order to support the design activities as well as the reusability of available examined solutions in developing new technical projects in the field of modular plant design, a web-based application for quality- and know-how assurance, Reuse-Atlas, was developed. Using exemplary designed modules, aspects of a quality- and know-how assurance as well as the reusability of the engineering data was implemented and transferred to Reuse-Atlas. The Reuse-Atlas includes structures for the modules of different plant complexity like structural group- and plant group-modules. It allows more efficiency by tracking of undertaken decisions and assumptions during the module development and design and therefore simplicity in designing the new plants and modifying the old ones. Keywords: computer-aided plant design, modular plant design, modularization 1. Introduction New plant planning methods, as for example module technology, combined with computer-aided plant design offer basis for better quality assurance in the early stage of process development and plant layout. In regard to the numerous designed plants the possibility for reusing the available examined solutions in new projects has still not received enough attention. The reusability of the revised solutions and their technical know-how could lead to improvement in the efficiency of project development, project quality and consequently reduces cost. Plant engineering and construction companies or their divisions were always interested in reducing cost and therefore in using of existing solutions in developing new technical projects. However an appropriate selection of suitable documents and information could be a very difficult task in case of different customer requirements and missing know-how warehouses. For this reason the plant layout and design will be mostly started from scratch. Within the scope of plant layout and design a complete design process based on a process simulation, cost calculation, dimensioning and layout design of process units, apparatus and machines included 2Dand 3D-plant activities will be realised. The design process is iterative and is carried out on the basis of experiences of the project engineers. In order to reduce time-to-market, a given workflow, which determines the working steps and contents, will be combined with existing engineering approaches, as for example simultaneous-, concurrent- and collaborative engineering. Despite these systematic approaches, the developed solutions are like stand-alone solutions. These are often only adapted to the existing project conditions without consideration of superior aspects of plant layout and design, as for example modularization. It is therefore no surprise that such solutions developed by different process engineers are unique and rather rarely usable for the new technical projects. As a consequence of this, ad-hoc solutions will be generated and the assurance of the engineering know-how will be often neglected. It comes rather seldom to the
2 Ł. Hady and G. Wozny product costing analysis and revision of the developed solutions after the technical project is finished. An Achilles' heel is searching for appropriate information. The study results of the Marketing Research Institute carried out by Vanson Bourne in May 2007, where 610 managers from European companies were questioned shown that, an employee in a typical European company wastes in average 67 minutes per day in an ineffective searching for information. In a company with 1000 employees and an average annual salary of Euro, it could lead to annually eight million Euro expenses (Kaiser, 2007). 2. Modular Plant Design: a future plant layout and design approach? 2.1. Concept of the Engineering Reuse The idea of module-oriented plant design is based on the definition of the process engineering units modules, which are functionally independent (Hady et al., 2007). A modular plant consists of plant group-modules which are designed in a modular way. The plant group-modules are flexible process engineering units which are designed from smaller ones, namely from structural group-modules. Fig. 1 represents a structure of a modular plant with two approaches which can be used by modular plant engineering: Modular-Concept and Modular-Technique. The Modular-Concept characterizes the concept of the Engineering-Reuse and the Modular-Technique the concept of the Equipment Reuse. The last one is discussed within section 2.2. Modular-Concept Engineering-Reuse Plant Modular-Technique Classical Engineering Structural group- module Plant group- module Equipment Fig. 1. Modular structure of the plant with two approaches for modular plant design: Modular- Concept and Modular-Technique The plant group-modules are responsible for the basic operations and the structural group-modules are responsible for the basic functions as long as the whole process is covered by the plant. The configuration and layout of plant group-modules depends on the number of required basic operations. Unlike the plant group-modules, the structural group-modules are fixed process engineering units. They can only be affected with small constructional or layout changes such as near piping, order of armatures and supports. The adaptability of the structural group-modules to the conditions of new plant group-modules or whole plants during the Engineering-Reuse will be covered with a degree of flexibility around 10 to 20% for possible changes. According to this Modular Concept of Engineering Reuse (Fig. 1) various structural group-modules were developed (Hady et al., 2009a) Concept of the Equipment Reuse The concept of the Equipment Reuse describes the possibility for planning and designing of changeable plants, which configuration could be affected and changed due to the product or performance changes or requirements as well as by adaptation of the existing configuration from a pilot plant- or mini plant-scale to the production of the plant-scale. Using modularization at this complexity level, the changeability of a plant
3 Computer-aided web-based application to modular plant design should be characterized and taken into consideration within the scope of the conceptual design. In addition the standardization potentials should be developed and the suitable, standardized equipment-modules should be defined and designed. In an industrial project a mobile Absorption-module was planned and designed (Fig. 2, right hand side). This Absorption-module can be operated under changed process requirements, raw materials, operation parameters as well as production performance. Fig. 2. Absorption-Miniplant (left) and Absorption-module (right) (Mueller et al., 2009) The engineering activities carried out during the modular plant layout and design lead to production of a large amount of documentation, as for example P&ID s, 2D-equipment layouts, 3D-CAD models of modules as well as of information such as design rules and planning guidelines. Due to the fact that developed modules and its documentation cover know-how principles and quality characteristics, an efficient data management of modules is very important and could be considered as a support toward successful Engineering- and Equipment Reuse. 3. Online application to support of modular plant engineering The necessity of development of a tool to support of modular plant layout and design was stressed by Lueneburg (2003). The definition of module borders, levels of modularization as well as the development of the module libraries were the main statements which should be considered during the application of modularization (Lueneburg et al., 2003). In order to guarantee the know-how assurance as well as to increase quality of the developed modules, some additional aspects were taken into consideration during development of the Reuse Atlas. These are: Assurance of the modularization- and standardization rules Assurance of the undertaken assumptions and decisions during module design Assurance of the variant construction Concept of the Reuse-Atlas Since the quality of the available equipment-parts and modules of a different complexity used for plant layout and design is so important, the concept for the assurance of available know-how principles and quality characteristics was developed. This concept of the documentation and management system of modules, so-called Reuse-Atlas, was discussed by Hady (Hady et al., 2009b). All of above mentioned documentation such as: 2D-equipment layouts, 3D-CAD models, know-how principles and quality characteristics and all other information, which corresponds to the developed modules, builds a main structure of the Reuse-Atlas. Moreover such a Reuse-Atlas should have: Easy and intuitive handling via a web browser, user friendly interface Possibility to be continually extended by users to cover the documentation of new structural group- or plant group-modules
4 Ł. Hady and G. Wozny Adaptability to the requirements of design and project engineers 3.2. Reuse-Atlas: application software For the implementation of the web-based Reuse Atlas a combination of operating system - web server - database system - scripting language for queries of the data base was required. As a platform for implementation of the Reuse-Atlas a so-called WAMP - platform was used. WAMP stands for Windows - Apache - MySQL - PHP. The web based Reuse-Atlas was also implemented on the basis of the HTML and PHP for a web development as well as other Open-Source-Software such as MySQL for the applied database of users, know-how principles and quality characteristics and Apache HTTP Server for a web server Structure of the Reuse-Atlas The Reuse-Atlas enables a password protected storage, updating and management of the module documentation as well as all employees an access for reading of the stored and storage of the new data via Internet. After login, a suitable data base has to be chosen or created, if the online application is used for the first time. Storage or updating cover the modular hierarchy of the plant, such as plant group- and structural group-modules and their documentation such as e.g. P&ID s, 2D-equipment layouts, 3D-CAD models of modules, know-how principles and quality characteristics. This hierarchical structure fulfils the Top-Down decomposition shown in Fig. 1 and has only an administrative character. After a suitable data base was chosen the available hierarchical structure of plant group- and structural group-modules is displayed. The hierarchical structure of the Deisobutanizer-plant group-module is shown in Fig. 3 (left hand side). Fig. 3. Hierarchical (modular) structure (left hand side) as well as definition of connections between plant group- and structural group-modules within a chosen data base (right hand side) For each data base as well as each modular level of a plant a short description about e.g. the scope or application can be enclosed. At the same time the stored modules can be displayed in three different views, where either plant group- or structural group-modules can be shown and with a hierarchical structure, where plant group-modules with the associated structural group-modules can be displayed. The user interface shown in Fig. 3 (right hand side) favours the suitable connection between plant group- and structural group-modules. Using it, process engineers are able not only to define some new connections but also to modify or delete the existing ones. As an outcome for using it, the redundant storage of relevant data which cover know-how principles and quality characteristics of the developed modules can be avoided. A predefined documentation structure, which is identically developed for each plant group- and structural group-
5 Computer-aided web-based application to modular plant design module, gives an overview to the stored documents and information. This structure is discussed on the example of the pump structural group-module and shown in Fig. 4 and 5. The left side of the Reuse-Atlas describes the level of visualization and allows saving of information regarding the 2D- and the 3D-module layouts with characteristic 2D- and 3D-views. The buttons: H-H (horizontal-horizontal) to H-V-1 (horizontal-vertical-1) shown in Fig. 4, correspond to the pump structural group-modules with different arrangements of the pipes on the pressure- and suction side. The Reuse-Atlas gives also an access to the modules designed with commercial CAD software. Therefore the available models of modules could be easily revised and reused. The number of documents, which can be stored in the 2D- and 3D-view is unlimited and depends on the complexity of the modules. The right side of the Reuse-Atlas describes the documentation of the modules. Here the know-how principles and dimensional characteristics of the given modules could be found, edited and created as Excel-, PDFor ASCII-files. The Reuse-Atlas gives process engineers a possibility of continual extension of the data base not only for documentation and models of the new modules but also for new sizes, arrangements and layouts within an existing module. Fig. 4. 2D-view of the visualization level (left hand side) and dimensional characteristics of 2Dlayouts of the documentation level (right hand side) of the pump structural group-module The table shown in Fig. 4 covers dimensional characteristics of modules which correspond with 2D-view of the visualization level. This table can be modified and extended with additional information regarding other sizes, arrangements or dimensional characteristics of 2D-layouts. The second possibility for visualization of the stored modules is shown in Fig. 5 (3D-view), where for each module and its arrangements, movies of 3D-models of modules can be stored and played via the web browser. It gives a better and faster possibility for evaluation of the stored modules by users. Since the know-how principles cannot be always expressed with figures, movies and tables, an editable verbal description of undertaken assumptions and decisions is also available and possible within a section know-how principles. This verbal description should favour the traceability of the undertaken assumptions and decisions. The know-how principles can be extended on new information for all sizes and arrangements of stored plant group- and structural group-module or only for the selected ones. The already stored information can be modified or, if it is necessary, deleted. In Fig. 5 (left hand side, Add new notice button) is shown, how some new information can be added to the existing ones. Fig. 5 (right hand side) shows an user interface used for the management of stored module documentation. This user interface makes it
6 Ł. Hady and G. Wozny possible to carry out a continual extension as well as maintenance of the Reuse-Atlas. Starting from the left side of this user interface, the module arrangements/ -layouts and sizes, stored drawings, movies and 3D-models of modules are available and displayed here. Fig. 5. 3D-view of the visualization level and know-how principles of the documentation level (left hand side) as well as management of the module documentation (right hand side) 4. Conclusion and Acknowledgement The developed Reuse-Atlas favours the reusability of the equipment-modules and makes an internal technical know-how of a company or a division available to all employees involved in one project via Intranet or Internet. Due to easy and user friendly handling as well as extendable possibilities of this web-based application, planning works and computer-aided plant design with the Reuse-Atlas could be well supported and accelerated. Moreover, the stored modules and the know-how of modules can be reused every time when a new project is executed. As an outcome for using Reuse- Atlas, repeatable design duties could be avoided, planning works are accelerated, the know-how and the quality of the modules are assured even though the experienced engineers are no longer involved in the project. Due to the fact, that efficient Engineering Reuse and the application of the predesigned modules depend on their arrangement and configuration, the Reuse-Atlas could support the optimal development and design of the equipment-module layouts. The authors acknowledge support from the Cluster of Excellence "Unifying Concepts in Catalysis" coordinated by the Berlin Institute of Technology and funded by the German Research Foundation (DFG). References Ł. Hady, W. Lueneburg, M. Dyląg, G. Wozny, 2007, Modular investment cost estimate of multipurpose chemical plant, Chemical and Process Engineering, 28 (1), Ł. Hady, G. Wozny, 2009a, Know-how and quality assurance using a web based Reuse-Atlas, Chemical Engineering Transactions, 18, , DOI: /CET Ł. Hady, M. Dyląg, G. Wozny, 2009b, Investment cost estimation and calculation of chemical plants with classical and modular approaches, Chemical and Process Engineering, 30 (2), J. Kaiser, 2007, Study: Waste of millions by insufficient information systems in companies, PresseBox [BoxID , Software] W. Lueneburg, W. Zahn, 2003, Modulare Anlagentechnik, Chemie Ingenieur Technik, 75, 1022 M. Mueller, H. Thielert, G. Wozny, 2009, unpublished internal documentation
SYSTEM DEVELOPMENT AND IMPLEMENTATION
CHAPTER 6 SYSTEM DEVELOPMENT AND IMPLEMENTATION 6.0 Introduction This chapter discusses about the development and implementation process of EPUM web-based system. The process is based on the system design
More informationCOURSE CONTENT FOR WINTER TRAINING ON Web Development using PHP & MySql
COURSE CONTENT FOR WINTER TRAINING ON Web Development using PHP & MySql 1 About WEB DEVELOPMENT Among web professionals, "web development" refers to the design aspects of building web sites. Web development
More informationBitrix Site Manager 4.1. User Guide
Bitrix Site Manager 4.1 User Guide 2 Contents REGISTRATION AND AUTHORISATION...3 SITE SECTIONS...5 Creating a section...6 Changing the section properties...8 SITE PAGES...9 Creating a page...10 Editing
More informationProGUM-Web: Tool Support for Model-Based Development of Web Applications
ProGUM-Web: Tool Support for Model-Based Development of Web Applications Marc Lohmann 1, Stefan Sauer 1, and Tim Schattkowsky 2 1 University of Paderborn, Computer Science, D 33095 Paderborn, Germany {mlohmann,sauer}@upb.de
More informationWeb Forms for Marketers 2.3 for Sitecore CMS 6.5 and
Web Forms for Marketers 2.3 for Sitecore CMS 6.5 and later User Guide Rev: 2013-02-01 Web Forms for Marketers 2.3 for Sitecore CMS 6.5 and later User Guide A practical guide to creating and managing web
More informationPublish Joomla! Article
Enterprise Architect User Guide Series Publish Joomla! Article Author: Sparx Systems Date: 15/07/2016 Version: 1.0 CREATED WITH Table of Contents Publish Joomla! Article 3 Install Joomla! Locally 4 Set
More informationSeamless Web Data Entry for SAS Applications D.J. Penix, Pinnacle Solutions, Indianapolis, IN
Seamless Web Data Entry for SAS Applications D.J. Penix, Pinnacle Solutions, Indianapolis, IN ABSTRACT For organizations that need to implement a robust data entry solution, options are somewhat limited
More informationUsing Windows Task Scheduler instead of the Backup Express Scheduler
Using Windows Task Scheduler instead of the Backup Express Scheduler This document contains a step by step guide to using the Windows Task Scheduler instead of the Backup Express Scheduler. Backup Express
More informationRotorcraft Health Management System (RHMS)
AIAC-11 Eleventh Australian International Aerospace Congress Rotorcraft Health Management System (RHMS) Robab Safa-Bakhsh 1, Dmitry Cherkassky 2 1 The Boeing Company, Phantom Works Philadelphia Center
More informationCourse Scheduling Support System
Course Scheduling Support System Roy Levow, Jawad Khan, and Sam Hsu Department of Computer Science and Engineering, Florida Atlantic University Boca Raton, FL 33431 {levow, jkhan, samh}@fau.edu Abstract
More informationEnterprise resource planning Product life-cycle management Information systems in industry ELEC-E8113
Enterprise resource planning Product life-cycle management Information systems in industry ELEC-E8113 Contents Enterprise resource planning (ERP) Product data management (PDM) Product lifecycle management
More informationCyberAds Studio. Ready to Deploy Intranets Small to mid-sized companies February 2003
CyberAds Studio Ready to Deploy Intranets Small to mid-sized companies February 2003 www.cyberadsstudio.com 190 Jill Lane, Suite 1 Laurel, MD 20724 Tel: (301) 776 1446 Sales@cyberadsstudio.com 1 Product
More informationFree and Open Source Document Management Systems
Free and Open Source Document Management Systems Anas Tawileh School of Computer Science, Cardiff University 5 The Parade, Cardiff CF24 3AA, UK anas@tawileh.net Abstract Document Management Systems captured
More informationDeveloping ASP.NET MVC 4 Web Applications Course 20486A; 5 Days, Instructor-led
Developing ASP.NET MVC 4 Web Applications Course 20486A; 5 Days, Instructor-led Course Description In this course, students will learn to develop advanced ASP.NET MVC applications using.net Framework 4.5
More informationBureau for Visual Affairs. content management system. Keep your website up-to-date and relevant with ease
content management system Keep your website up-to-date and relevant with ease 1 Only an up-to-date and well maintained website is perceived as relevant and will generate return visits and involvement.
More informationINTRODUCTION TO ATRIUM... 2 SYSTEM REQUIREMENTS... 2 TECHNICAL DETAILS... 2 LOGGING INTO ATRIUM... 3 SETTINGS... 4 NAVIGATION PANEL...
INTRODUCTION TO ATRIUM... 2 SYSTEM REQUIREMENTS... 2 TECHNICAL DETAILS... 2 LOGGING INTO ATRIUM... 3 SETTINGS... 4 CONTROL PANEL... 4 ADDING GROUPS... 6 APPEARANCE... 7 BANNER URL:... 7 NAVIGATION... 8
More informationCreating an Intranet Website for Library & Information Services in an Organization
Creating an Intranet Website for Library & Information Services in an Organization The Objective The purpose of this write-up is to guide you through all the steps necessary to create a website and put
More informationContent Author's Reference and Cookbook
Sitecore CMS 6.5 Content Author's Reference and Cookbook Rev. 110621 Sitecore CMS 6.5 Content Author's Reference and Cookbook A Conceptual Overview and Practical Guide to Using Sitecore Table of Contents
More informationWhat is a workflow? Workflows are a series of actions that correspond to a work process
SharePoint 2010 What is a workflow? Workflows are a series of actions that correspond to a work process For example a document approval process Workflows can control most aspects of a SharePoint 2010 site,
More informationSIMIAN systems. Setting up a Sitellite development environment on Windows. Sitellite Content Management System
Setting up a Sitellite development environment on Windows Sitellite Content Management System Introduction For live deployment, it is strongly recommended that Sitellite be installed on a Unix-based operating
More informationBijlage1. Software Requirements Specification CIS. For. Version 1.0 final. Prepared by Saidou Diallo. HvA/Inaxion. November 2009
Bijlage1 Software Requirements Specification For CIS Version 1.0 final Prepared by Saidou Diallo HvA/Inaxion November 2009 Copyright 2009/2010 Inaxion BV. Table of Contents 1. Introduction...3 1.1 Purpose...
More informationUmbraco v4 Editors Manual
Umbraco v4 Editors Manual Produced by the Umbraco Community Umbraco // The Friendly CMS Contents 1 Introduction... 3 2 Getting Started with Umbraco... 4 2.1 Logging On... 4 2.2 The Edit Mode Interface...
More informationLOCAL CRM APPLICATION FOR BILLBOARD ADVERTISING COMPANY
advertising company, billboard, customer relationship management, cloud computing, software as a service, Radosław URBAŃSKI * LOCAL CRM APPLICATION FOR BILLBOARD ADVERTISING COMPANY Abstract The article
More informationE-Commerce: Designing And Creating An Online Store
E-Commerce: Designing And Creating An Online Store Introduction About Steve Green Ministries Solo Performance Artist for 19 Years. Released over 26 Records, Several Kids Movies, and Books. My History With
More informationIFS-8000 V2.0 INFORMATION FUSION SYSTEM
IFS-8000 V2.0 INFORMATION FUSION SYSTEM IFS-8000 V2.0 Overview IFS-8000 v2.0 is a flexible, scalable and modular IT system to support the processes of aggregation of information from intercepts to intelligence
More informationGlobal Management Reporting with SAP BO Dashboards at Kemira
Processes & Applications, SAP Business & Technology Consulting Information when you need it: Consolidated, global reporting platform available both online and offline Global Management Reporting with SAP
More informationYou can preview your exam by clicking the View Questions button under the Review tab:
Custom Exams Custom Exams To access the Custom Exam Editor, select the My School tab from your LabSim Home screen and click the Custom Exams tab. To create a new exam, click the Add button or to edit an
More informationPorting Legacy Windows Applications to the Server and Web
Porting Legacy Windows Applications to the Server and Web About TX Text Control.NET Server: TX Text Control.NET Server is a fully programmable word processing engine for deployment in an ASP.NET server
More informationAutomation of CNC Program Generation
Automation of CNC Program Generation In a typical product manufacturing industry, there is a long lead time involved starting from the manufacturing plant layout, machine setup, product machining in CNC
More informationWeb. Studio. Visual Studio. iseries. Studio. The universal development platform applied to corporate strategy. Adelia. www.hardis.
Web Studio Visual Studio iseries Studio The universal development platform applied to corporate strategy Adelia www.hardis.com The choice of a CASE tool does not only depend on the quality of the offer
More informationPHP Web Authoring for Database Management based on MVC Pattern
, October 19-21, 2011, San Francisco, USA PHP Web Authoring for Database Management based on MVC Pattern Chanchai Supaartagorn Abstract Nowadays, the MVC pattern is the effective method for the development
More information2015 WW Australia Training Catalogue
2015 WW Australia Training Catalogue Wonderware Software Solutions for Real-Time Success Wonderware is the market leader in real-time operations management software. Wonderware software solutions enable
More informationTHE XML TECHNOLOGY IMPLEMENTED IN MICROSOFT SQL SERVER
THE XML TECHNOLOGY IMPLEMENTED IN MICROSOFT SQL SERVER Pirnau Mironela Universitatea Titu Maiorescu, Facultatea de Stiinta si Tehnologia Informatiei, Str. Horia Mecelariu nr 8-10, bl 21/1 sector 1, Bucuresti,
More informationQuick Start Guide. This guide will help you get started with Kentico CMS for ASP.NET. It answers these questions:
Quick Start Guide This guide will help you get started with Kentico CMS for ASP.NET. It answers these questions:. How can I install Kentico CMS?. How can I edit content? 3. How can I insert an image or
More informationEfficient Management of Tests and Defects in Variant-Rich Systems with pure::variants and IBM Rational ClearQuest
Efficient Management of Tests and Defects in Variant-Rich Systems with pure::variants and IBM Rational ClearQuest Publisher pure-systems GmbH Agnetenstrasse 14 39106 Magdeburg http://www.pure-systems.com
More informationGraduate Student Database Project
Graduate Student Database Project Nicholas Wallen Department of Computer Science Florida State University Major Professor: Dr. David Whalley In partial fulfillment of the requirements for the Degree of
More informationQUALITYMATE FOR LOAD TESTING
QUALITYMATE FOR LOAD TESTING QualityMate suite of tools enables organizations to industrialize the software development process providing support for different process activities like Requirements Management,
More informationHow To Manage Web Content Management System (Wcm)
WEB CONTENT MANAGEMENT SYSTEM February 2008 The Government of the Hong Kong Special Administrative Region The contents of this document remain the property of, and may not be reproduced in whole or in
More informationDACAAM-NET AN INTRANET APPLICATION FOR MANAGEMENT OF AGEING RELATED DATA
DACAAM-NET AN INTRANET APPLICATION FOR MANAGEMENT OF AGEING RELATED DATA K. Baumann-ne Tanits a, Á. Jánosiné Bíró a, M Osztheimer a, L. Czibolya a, S. Rátkai b, L. Mátis b, T. Katona b a Institute for
More informationInstallation Instructions
Installation Instructions 25 February 2014 SIAM AST Installation Instructions 2 Table of Contents Server Software Requirements... 3 Summary of the Installation Steps... 3 Application Access Levels... 3
More informationA WEB-BASED VE SUPPORTING SYSTEM FOR VE FACILITATOR AND MEMBERS IN VE WORKSHOP
Page 1 A WEB-BASED VE SUPPORTING SYSTEM FOR VE FACILITATOR AND MEMBERS IN VE WORKSHOP Heungmin PARK, CVS, IAM corporation (whcool@hanmail.net) Coauthor: Jong-Kwon LIM, CVS, Ph D., IAM corporation Coauthor:
More informationARTICLE Cloud Computing more than a hype?
Author: Klaus Hübschle Created on: August 2015 Version: 1.0 Content Most IT experts predict a promising future for cloud computing also in the automation industry. However, which are the applications where
More informationDürr Projects. Experts expertise for your project
Dürr Projects. Experts expertise for your project Efficient software - Efficient project Consulting Overview Dürr Projects is an integrated tool for project processing which applies where standard tools
More informationNintex Workflow 2013 & InfoPath Form Design workshop
Nintex Workflow 2013 & InfoPath Form Design workshop Duration: 30 Hrs. Course Outline: Module 1: Creating a SharePoint Form with InfoPath Designer Design a SharePoint Form Using the Blank Form Template
More informationBasic Unix/Linux 1. Software Testing Interview Prep
Basic Unix/Linux 1 Programming Fundamentals and Concepts 2 1. What is the difference between web application and client server application? Client server application is designed typically to work in a
More informationOnline Packaging Management Solution
Online Packaging Management Solution WebCenter WebCenter is a powerful web-based Packaging Management platform to manage your business process, approval cycles and digital packaging assets. Specification
More informationINCOGEN Professional Services
Custom Solutions for Life Science Informatics Whitepaper INCOGEN, Inc. 3000 Easter Circle Williamsburg, VA 23188 www.incogen.com Phone: 757-221-0550 Fax: 757-221-0117 info@incogen.com Introduction INCOGEN,
More informationDevelopment of Application Software for Stock Material Selection for Manufacturing of Shafts
Development of Application Software for Stock Material Selection for Manufacturing of Shafts Oduola. M. O., Akinluwade, K. J., Immanuel, T., Efozia, N. F., Musa, D. I., *Adetunji, A. R. Department of Engineering,
More informationChristoph Schlenzig 1
EnviroInfo 2002 (Wien) Environmental Communication in the Information Society - Proceedings of the 16th Conference The MESAP Software for the German Emission Inventory An integrated information system
More informationERP Systems. Generic ERP system. Categories of ERP systems. December 4, 2014
ERP Systems December 4, 2014 Generic ERP system 2 Categories of ERP systems By size and complexity Enterprise grade packages Midmarket solutions Small business packages By specialization Generic packages
More informationDocument management and exchange system supporting education process
Document management and exchange system supporting education process Emil Egredzija, Bozidar Kovacic Information system development department, Information Technology Institute City of Rijeka Korzo 16,
More informationCreating Library Website Using Open Source Content Management System
Creating Library Website Using Open Source Content Management System Vimal kumar V. 1 and Deepak Sankar 2 1 Asian School of Business Technopark Trivandrum-695 581 Vimal0212@yahoo.com 2 Deepak Shankar Malayalam
More informationOpen Source Content Management System for content development: a comparative study
Open Source Content Management System for content development: a comparative study D. P. Tripathi Assistant Librarian Biju Patnaik Central Library NIT Rourkela dptnitrkl@gmail.com Designing dynamic and
More informationOracle Business Intelligence Discoverer Viewer
Oracle Business Intelligence Discoverer Viewer User s Guide 10g Release 2 (10.1.2.1) B13987-04 July 2005 Oracle Business Intelligence Discoverer Viewer User s Guide, 10g Release 2 (10.1.2.1) B13987-04
More informationP R O V I S I O N I N G O R A C L E H Y P E R I O N F I N A N C I A L M A N A G E M E N T
O R A C L E H Y P E R I O N F I N A N C I A L M A N A G E M E N T, F U S I O N E D I T I O N R E L E A S E 1 1. 1. 1.x P R O V I S I O N I N G O R A C L E H Y P E R I O N F I N A N C I A L M A N A G E
More informationHow to recover IE Client
HIKVISION EUROPE B.V. How to recover IE Client (WebClientActiveX Control) Name: WebClientActiveX Control Publisher: HANGZHOU HIKVISION DIGITAL TECHNOLOGY CO.,LTD. Type: ActiveX Control Version: 2.4.0.56
More informationInternational Journal of Engineering Technology, Management and Applied Sciences. www.ijetmas.com November 2014, Volume 2 Issue 6, ISSN 2349-4476
ERP SYSYTEM Nitika Jain 1 Niriksha 2 1 Student, RKGITW 2 Student, RKGITW Uttar Pradesh Tech. University Uttar Pradesh Tech. University Ghaziabad, U.P., India Ghaziabad, U.P., India ABSTRACT Student ERP
More informationIndustrial IT Ó Melody Composer
Overview Industrial IT Ó Melody Composer Features and Benefits Support of concurrent engineering for Control Systems Operation on Windows NT and Windows 2000 Multiple client/server architecture Off-Line
More informationWelcome to Collage (Draft v0.1)
Welcome to Collage (Draft v0.1) Table of Contents Welcome to Collage (Draft v0.1)... 1 Table of Contents... 1 Overview... 2 What is Collage?... 3 Getting started... 4 Searching for Images in Collage...
More informationTHE IMPLEMENTATION OF WEB-BASED TECHNOLOGIES IN ENGINEERING DATA MANAGEMENT
INTERNATIONAL DESIGN CONFERENCE - DESIGN 2000 Dubrovnik, May 23-26, 2000 THE IMPLEMENTATION OF WEB-BASED TECHNOLOGIES IN ENGINEERING DATA MANAGEMENT Pavlić Davor, Dorian Marjanović, Štorga Mario Keywords:
More information2/24/2010 ClassApps.com
SelectSurvey.NET Training Manual This document is intended to be a simple visual guide for non technical users to help with basic survey creation, management and deployment. 2/24/2010 ClassApps.com Getting
More informationSoftware Requirements Specification
CSL740 Software Engineering Course, IIT Delhi Software Requirements Specification Submitted By Abhishek Srivastava (2011EEY7511) Anil Kumar (2009CS10180) Jagjeet Singh Dhaliwal (2008CS50212) Ierum Shanaya
More informationBuilding Java Servlets with Oracle JDeveloper
Building Java Servlets with Oracle JDeveloper Chris Schalk Oracle Corporation Introduction Developers today face a formidable task. They need to create large, distributed business applications. The actual
More informationCatDV Pro Workgroup Serve r
Architectural Overview CatDV Pro Workgroup Server Square Box Systems Ltd May 2003 The CatDV Pro client application is a standalone desktop application, providing video logging and media cataloging capability
More informationDESIGN AND IMPLEMENTATION OF A WEB-BASED GIS FOR PATIENTS REFERRAL TO HOSPITALS IN ZARIA METROPOLIS
www.arpapress.com/volumes/vol8issue1/ijrras_8_1_14.pdf DESIGN AND IMPLEMENTATION OF A WEB-BASED GIS FOR PATIENTS REFERRAL TO HOSPITALS IN ZARIA METROPOLIS F.B Abdullahi 1 & T.Hassan 2 Department of Mathematics
More informationARIS Design Platform Getting Started with BPM
Rob Davis and Eric Brabander ARIS Design Platform Getting Started with BPM 4y Springer Contents Acknowledgements Foreword xvii xix Chapter 1 An Introduction to BPM 1 1.1 Brief History of Business Process
More informationLAMP : THE PROMINENT OPEN SOURCE WEB PLATFORM FOR QUERY EXECUTION AND RESOURCE OPTIMIZATION. R. Mohanty Mumbai, India
LAMP : THE PROMINENT OPEN SOURCE WEB PLATFORM FOR QUERY EXECUTION AND RESOURCE OPTIMIZATION R. Mohanty Mumbai, India INTRODUCTION TO MAJOR WEB DEVELOPMENT PLATFORMS The concurrent online business transactions
More informationManual Password Depot Server 8
Manual Password Depot Server 8 Table of Contents Introduction 4 Installation and running 6 Installation as Windows service or as Windows application... 6 Control Panel... 6 Control Panel 8 Control Panel...
More informationA Concept for an Electronic Magazine
TERENA-NORDUnet Networking Conference (TNNC) 1999 1 A Concept for an Electronic Magazine Alexander von Berg Helmut Pralle University of Hanover, Institute for Computer Networks and Distributed Systems
More informationEfficient Design for the Oil and Gas Industry
white paper Efficient Design for the Oil and Gas Industry inspiration SUMMARY SolidWorks CAD software provides a complete 3D product development solution for meeting the demands of today s rapidly evolving
More informationInstalling Drupal on Your Local Computer
Installing Drupal on Your Local Computer This tutorial will help you install Drupal on your own home computer and allow you to test and experiment building a Web site using this open source software. This
More informationA Framework for Developing the Web-based Data Integration Tool for Web-Oriented Data Warehousing
A Framework for Developing the Web-based Integration Tool for Web-Oriented Warehousing PATRAVADEE VONGSUMEDH School of Science and Technology Bangkok University Rama IV road, Klong-Toey, BKK, 10110, THAILAND
More informationIndustrialIT System 800xA AC 870P/Melody Engineering
IndustrialIT System 800xA AC 870P/Melody Engineering Overview Features and Benefits Scalable System Architecture: The system architecture can range from a single station to complex client/server architecture.
More informationRichmond SupportDesk Web Reports Module For Richmond SupportDesk v6.72. User Guide
Richmond SupportDesk Web Reports Module For Richmond SupportDesk v6.72 User Guide Contents 1 Introduction... 4 2 Requirements... 5 3 Important Note for Customers Upgrading... 5 4 Installing the Web Reports
More informationDESIGN AND IMPLEMENTATION OF A WEB-BASED GIS FOR PUBLIC HEALTHCARE DECISION SUPPORT SYSTEM IN ZARIA METROPOLIS
DESIGN AND IMPLEMENTATION OF A WEB-BASED GIS FOR PUBLIC HEALTHCARE DECISION SUPPORT SYSTEM IN ZARIA METROPOLIS F. B. Abdullahi 1, M.M Lawal 2 & J.O Agushaka 3 Department Of Mathematics, Ahmadu Bello University,
More informationWebPublish. WebPublish is a modern and powerful publishing tool that can be customized to suit the needs of every organization.
WebPublish Create an entire website in one program for easy and great results. WebPublish is a modern and powerful publishing tool that can be customized to suit the needs of every organization. With WebPublish
More informationThe WebComfort Project
The WebComfort Project João Leonardo Carmo, Alberto Rodrigues da Silva SIQuant Engenharia do Território e Sistemas de Informação, Av. Casal Ribeiro, nº18 9ºDto, 1000-098 Lisboa, Portugal INESC-ID, Instituto
More informationLife Cycle Management for Oracle Data Integrator 11 & 12. At lower cost Get a 30% return on investment guaranteed and save 15% on development costs
Life Cycle Management for Oracle Data Integrator 11 & 12 Increase productivity Stop wasting your time doing things maually by automating every step in your project s Life Cycle At lower cost Get a 30%
More informationTechnical document. Group 3 Mate Tomin Pieter van Ede Raymond Weijermars Daniel Faustino Stefan Hospes
Technical document Group 3 Mate Tomin Pieter van Ede Raymond Weijermars Daniel Faustino Stefan Hospes Table of contents 1) Introduction... 2 2) System setup... 2 3) Implementation overview... 4 3.1) Client-side...
More informationA&D srl Consulting & Logistic Systems Galleria Spagna, 35-35127 Padova (PD) - Italy - Telefono +39.049.8792400 - Fax +39.049.8792408 Sede Legale:
INTEGRATED DOCUMENT MANAGEMENT GENERAL DIAGRAM 1 GENERAL CONCEPTS The integrated document management of a company is due to two trends: 1. electronic processing (scanning) of documents used within the
More informationOpenIMS 4.2. Document Management Server. User manual
OpenIMS 4.2 Document Management Server User manual OpenSesame ICT BV Index 1 INTRODUCTION...4 1.1 Client specifications...4 2 INTRODUCTION OPENIMS DMS...5 2.1 Login...5 2.2 Language choice...5 3 OPENIMS
More informationCTIS 256 Web Technologies II. Week # 1 Serkan GENÇ
CTIS 256 Web Technologies II Week # 1 Serkan GENÇ Introduction Aim: to be able to develop web-based applications using PHP (programming language) and mysql(dbms). Internet is a huge network structure connecting
More informationDiskPulse DISK CHANGE MONITOR
DiskPulse DISK CHANGE MONITOR User Manual Version 7.9 Oct 2015 www.diskpulse.com info@flexense.com 1 1 DiskPulse Overview...3 2 DiskPulse Product Versions...5 3 Using Desktop Product Version...6 3.1 Product
More informationExpanding Uniformance. Driving Digital Intelligence through Unified Data, Analytics, and Visualization
Expanding Uniformance Driving Digital Intelligence through Unified Data, Analytics, and Visualization The Information Challenge 2 What is the current state today? Lack of availability of business level
More informationAdvanced Tornado TWENTYONE. 21.1 Advanced Tornado. 21.2 Accessing MySQL from Python LAB
21.1 Advanced Tornado Advanced Tornado One of the main reasons we might want to use a web framework like Tornado is that they hide a lot of the boilerplate stuff that we don t really care about, like escaping
More informationSQL Injection Attack Lab Using Collabtive
Laboratory for Computer Security Education 1 SQL Injection Attack Lab Using Collabtive (Web Application: Collabtive) Copyright c 2006-2011 Wenliang Du, Syracuse University. The development of this document
More informationA CLOUD-BASED FRAMEWORK FOR ONLINE MANAGEMENT OF MASSIVE BIMS USING HADOOP AND WEBGL
A CLOUD-BASED FRAMEWORK FOR ONLINE MANAGEMENT OF MASSIVE BIMS USING HADOOP AND WEBGL *Hung-Ming Chen, Chuan-Chien Hou, and Tsung-Hsi Lin Department of Construction Engineering National Taiwan University
More informationCLOUD STORAGE USING HADOOP AND PLAY
27 CLOUD STORAGE USING HADOOP AND PLAY Devateja G 1, Kashyap P V B 2, Suraj C 3, Harshavardhan C 4, Impana Appaji 5 1234 Computer Science & Engineering, Academy for Technical and Management Excellence
More informationEmbedded BI made easy
June, 2015 1 Embedded BI made easy DashXML makes it easy for developers to embed highly customized reports and analytics into applications. DashXML is a fast and flexible framework that exposes Yellowfin
More informationWEB DEVELOPMENT IA & IB (893 & 894)
DESCRIPTION Web Development is a course designed to guide students in a project-based environment in the development of up-to-date concepts and skills that are used in the development of today s websites.
More informationSoftware Requirements Specification. Human Resource Management System. Sponsored by Siemens Enterprise Communication. Prepared by InnovaSoft
Software Requirements Specification Human Resource Management System Sponsored by Siemens Enterprise Communication Prepared by InnovaSoft Cansu Hekim - 1630888 Bekir Doğru - 1560085 Zaman Safari - 1572254
More informationzen Platform technical white paper
zen Platform technical white paper The zen Platform as Strategic Business Platform The increasing use of application servers as standard paradigm for the development of business critical applications meant
More informationSOFTWARE TESTING TRAINING COURSES CONTENTS
SOFTWARE TESTING TRAINING COURSES CONTENTS 1 Unit I Description Objectves Duration Contents Software Testing Fundamentals and Best Practices This training course will give basic understanding on software
More informationData Analytics and Reporting in Toll Management and Supervision System Case study Bosnia and Herzegovina
Data Analytics and Reporting in Toll Management and Supervision System Case study Bosnia and Herzegovina Gordana Radivojević 1, Gorana Šormaz 2, Pavle Kostić 3, Bratislav Lazić 4, Aleksandar Šenborn 5,
More informationA Secure Internet Service for Delivering Documents for the Blind
A Secure Internet Service for Delivering Documents for the Blind Benoit Guillon 1, Dominique Burger 1, and Bruno Marmol 2 1 Université Pierre et Marie Curie B23, INSERM U483, 75252 Paris Cedex, France
More informationAn Electronic Journal Management System
An Electronic Journal Management System Hrvoje Bogunović, Edgar Pek, Sven Lončarić and Vedran Mornar Faculty of Electrical Engineering and Computing, University of Zagreb Unska 3, 0000 Zagreb, Croatia
More informationONLINE EXERCISE SYSTEM A Web-Based Tool for Administration and Automatic Correction of Exercises
ONLINE EXERCISE SYSTEM A Web-Based Tool for Administration and Automatic Correction of Exercises Daniel Baudisch, Manuel Gesell and Klaus Schneider Embedded Systems Group, University of Kaiserslautern,
More informationAdministrator Manual
. Self-evaluation Platform (SEP) on Information Technology in Education (ITEd) for School Administrator Manual Mar 2006 [Version 3.0] Copyright 2005 Education and Manpower Bureau Page 1 Table of Contents
More informationSUCCESS STORY. Intranet Solution for Team Collaboration and Information Sharing
SUCCESS STORY Our client is a professional association mainly active in the field of catering and hotel industry in Vaud. Intranet Solution for Team Collaboration and Information Sharing www.axio- net.ch
More information