Security Provider Integration Kerberos Server

Transcription

1 Security Provider Integration Kerberos Server 2015 Bomgar Corporation. All rights reserved worldwide. BOMGAR and the BOMGAR logo are trademarks of Bomgar Corporation; other trademarks shown are the property of their respective owners. TC:5/5/2015

2 Table of Contents Kerberos Server for Single Sign-On 3 Create and Configure the Kerberos Security Provider 4 Prioritize and Manage Security Providers: Kerberos Servers 6 Troubleshoot Kerberos Server Integration Errors 7 CONTACT BOMGAR info@bomgar.com (US) +44 (0) (UK/EMEA) BOMGAR.COM 2

3 Kerberos Server for Single Sign-On Integration of your Bomgar Appliance with external security providers enables administrators to efficiently manage user access to Bomgar accounts by authenticating users against external directory stores. This guide is designed to help you configure the Bomgar Appliance to communicate with a Kerberos security provider for the purpose of user authentication. Note: To define group policies based upon groups within a remote server, you must configure both the LDAP group provider and the Kerberos user provider. You then must enable group lookup from the user provider's configuration page. One group security provider can be used to authorize users from multiple servers, including LDAP, RADIUS, and Kerberos. For group policy setup and for other security provider configurations, see the additional guides provided at Should you need any assistance, please contact Bomgar Technical Support at help.bomgar.com. CONTACT BOMGAR info@bomgar.com (US) +44 (0) (UK/EMEA) BOMGAR.COM 3

4 Create and Configure the Kerberos Security Provider Go to /login > Users & Security > Security Providers. From the dropdown, select the type of server you want to configure. Then click the Create Provider button. Alternatively, you can copy an existing provider configuration by clicking Create Copy. Enter the settings for this security provider configuration as detailed below. General Settings Name Create a unique name to help identify this object. Enabled: This provider is enabled If checked, your Bomgar Appliance can search this security provider when a user attempts to log in. If unchecked, this provider will not be searched. User and Display Names: Keep display name synchronized with remote system These values determine which fields should be used as the user's private and public display names. Strip realm from principal names Select this option to remove the REALM portion from the User Principal Name when constructing the Bomgar username. Authorization Settings User Handling Mode Select which users can authenticate to your Bomgar Appliance. Allow all users allows anyone who currently authenticates via your KDC. Allow only user principals specified in the list allows only user principles explicitly designated. Allow only user principals that match the regex allows only users principals who match a Perl-compatible regular expression (PCRE). SPN Handling Mode: Allow only SPNs specified in the list If unchecked, all configured Service Principal Names (SPNs) for this security provider are allowed. If checked, select specific SPNs from a list of currently configured SPNs. CONTACT BOMGAR info@bomgar.com (US) +44 (0) (UK/EMEA) BOMGAR.COM 4

5 LDAP Group Lookup If you want users on this security provider to be associated with their groups on a separate LDAP server, choose one or more LDAP group servers to use for group lookup. Default Group Policy Each user who authenticates against an external server must be a member of at least one group policy in order to authenticate to your Bomgar Appliance, logging into either the /login interface or the representative console. You can select a default group policy to apply to all users allowed to authenticate against the configured server. Note that if a default policy is defined, then any allowed user who authenticates against this server will potentially have access at the level of this default policy. Therefore, it is recommended that you set the default to a policy with minimum privileges to prevent users from gaining permissions that you do not wish them to have. Note: If a user is in a default group policy and is then specifically added to another group policy, the settings for the specific policy will always take precedence over the settings for the default, even if the specific policy is a lower priority than the default, and even if the default policy's settings are set to disallow override. Save Changes Click Save Changes to save this security provider configuration. CONTACT BOMGAR info@bomgar.com (US) +44 (0) (UK/EMEA) BOMGAR.COM 5

6 Prioritize and Manage Security Providers: Kerberos Servers Change Order Once you have set up your security providers, you can configure the order in which your Bomgar Appliance attempts to authenticate users. On the Security Providers page, click Change Order. Then drag and drop the configured providers to set their priority. Clustered servers move as one unit and can be prioritized within the cluster. After making changes to the order of priority, click the Save Changes button. Sync Synchronize the users and groups associated with an external security provider. Synchronization occurs automatically once a day. Clicking this button forces a manual synchronization. Disable Disable this security provider connection. This is useful for scheduled maintenance, when you want a server to be offline but not deleted. CONTACT BOMGAR info@bomgar.com (US) +44 (0) (UK/EMEA) BOMGAR.COM 6

7 Troubleshoot Kerberos Server Integration Errors Failed Logins If a user cannot log into Bomgar using valid credentials, please check that at least one of the following sets of criteria is met. 1. The user has been expressly added to an existing group policy. 2. A default group policy has been set for the security provider configuration created to access the server against which the user is authenticating. 3. The user is a member of a group that has been expressly added to an existing group policy, and both user authentication and group lookup are configured and linked. Error 6ca and Slow Logins 1. A 6ca error is a default response signifying that the Bomgar Appliance has not heard back from the DNS server. It may occur when attempting to log into the representative console. 2. If users are experiencing extremely slow logins or are receiving the 6ca error, verify that DNS is configured in your /appliance interface. Troubleshooting Individual Providers When configuring an authentication method tied to group lookup, it is important to configure first user authentication, then group lookup, and finally group policy memberships. When troubleshooting, you will want to work in reverse. 1. Verify that the group policy is looking up valid data for a given provider and that you do not have characters in the Policy Members field. 2. Next, if a group provider is configured, verify that its connection settings are valid and that its group Search Base DN is in the proper format. 3. If you want to use group lookup, verify that the security provider is set to look up group memberships of authenticated users. 4. To test the user provider, set a default policy and see if your users are able to log in. CONTACT BOMGAR info@bomgar.com (US) +44 (0) (UK/EMEA) BOMGAR.COM 7