SIMULIA BENELUX 2014 REGIONAL USER MEETING PROGRAM

Size: px
Start display at page:

Download "SIMULIA BENELUX 2014 REGIONAL USER MEETING PROGRAM"

Transcription

1 SIMULIA BENELUX 2014 REGIONAL USER MEETING PROGRAM

2 WELCOME SIMULIA Benelux is delighted to welcome you to the 2014 Regional User Meeting. This longstanding tradition in the SIMULIA community provides an invaluable platform for industry and academia to join together and learn how the latest simulation technology and methods can accelerate and improve product development. SPONSORS AGENDA SIMULIA BENELUX Regional User Meeting Day One - November 6 th 8:00 Registration and Coffee 8:30 (15 min) 8:45 (45 min) 9:30 Welcoming Remarks Alan Prior Director, Technical Sales SIMULIA Corporate Overview Roger Keene Vice President Formula Student Team Delft SIMULIA EuroNorth & Nordics SIMULIA Worldwide Operations

3 10:00 10:30 (15 min) Coffee Break NAFEMS An Overview of Technical Activities Ian Symington Technical Officer NAFEMS 10:45 (45 min) 11:30 12:00 12:30 (90 min) Abaqus 6.14 Update & Software developments in fe-safe 6.5 Gertjan Kloosterman Senior Technical Specialist Anders Winkler Senior Technical Specialist fe-safe Multiscale simulations of complex materials using Abaqus Sergio Turteltaub Associate Professor SIMULIA Benelux SIMULIA Nordic Delft University of Technology Failure of Short-Fiber Reinforced Plastic skin-stringer butt-joint connection Bas Tijs Stress engineer Wouter Wilson Engineering Manager Analyses Group Photo & Lunch Fokker Aerostructures B.V. Fokker Landing Gear B.V. 14:00 (60 min) 3DEXPERIENCE Gregor JUDEX User Experience Senior, Product Introduction John William Technical Sales Specialist SIMULIA SIMULIA Benelux 15:00 Simulation of disc degeneration in the spine Marc van Rijsbergen, Véronique Barthelemy, Wouter Wilson,

4 15:30 Bert van Rietbergen, Keita Ito Orthopaedic Biomechanics, Department of Biomedical Engineering Eindhoven University of Technology Coffee Break 16:00 Dynamic Oil Pump Analysis using Abaqus Harold van Aken Director and Senior Simulation Engineer Code Product Solutions 16:30 Finite element modeling of wind turbine blades Mathijs Peeters, Wim Van Paepegem Mechanics of Materials and Structures Ghent University 17:00 17:30 Simpleware to Abaqus: 3D-Image Based Simulation with Applications in Oil & Gas, Aerospace, Automotive and the Medical Device Industries David Harman Regional Technical Sales Manager The use of FEM to compare different designs of Total Knee Arthroplasty Silvia Pianigiani, Bernardo Innocenti BEAMS Department Simpleware Université Libre de Bruxelles 18:00 Q&A Panel, agenda evening program 18:30 End of day 1 Drinks 19:00 Conference Dinner & Musical Entertainment AGENDA SIMULIA BENELUX Regional User Meeting

5 8:00 Registration and Coffee Day Two - November 7 th 8:30 (15 min) Welcome & Day overview Alan Prior Director, Technical Sales SIMULIA EuroNorth & Nordics 8:45 (45 min) 9:30 10:00 10:30 11:00 11:30 12:00 12:30 Optimization update (Isight and Tosca) Arie Platschorre Senior Technical Specialist SIMULIA Benelux Automated design of composite landing gear brace assemblies Wouter Wilson, Gert-Jan Versteeg Engineering Manager Analyses Natural frequency analysis of a thruster Rob Dokter Manager Structural Analysis - Business Line Propulsion Coffee Break Fokker Landing Gear B.V. Wärtsilä Ship Power Frequency Domain Approach for Homogenization of Viscoelastic Composites Using ABAQUS Mohamed El Hachemi Advanced Materials & Structures Modelling LoW8 Pressure Vessels Stanley Wong Stress Engineer Centre De Recherche Public Henri Tudor Advanced Lightweight Engineering (ALE) Modeling the Selective Laser Melting 3D Metal Printing Process Rob Huls Senior scientist National Aerospace Laboratory (NLR) Numerical simulation of the 'human impact' pendulum test for structural glass Joren Pelfrene, Sam Van Dam, Wim Van Paepegem Department of materials science and engineering

6 Ghent University 13:00 (60 min) Lunch 14:00 Parallel workshop sessions Workshop A: Modeling Polymers and Plastic with Abaqus This workshop covers the material testing, material modeling and finite element analysis of polymers and plastics. The instructor will present the material models available in Abaqus to represent the polymers and discuss the process of materialmodel calibration using test data. Characterizing a particular polymer compound for use with FEA can be quite challenging because of the complexity of its behavior. This course ties together issues of how to test the material, under what conditions, what loadings, what preconditioning, and how to use this test data to derive a reliable and robust FEA material model for the polymer/plastic. Workshop B: Getting Started with 3DX and Simulation Apps Hands-on session In this workshop users will get to know the SIMULIA apps in the new 3DEXPERIENCE platform using hands-on workshops with guided instructions. Users will get familiar with the new user-interface and get to know the workflows to create, run and postprocess different Abaqus analysis using different SIMULIA apps. Focus will be on the advanced functionality specific to the 3DEXPERIENCE platform which demonstrates the power of the platform to deliver new user experience to perform your Abaqus simulations. 15:00 Coffee Break 15:15 Continuation Workshops 17:00 Adjourn

Digital Image Correlation Technique Applied to Laminated Glass Plates Under Free Air Blast Loading

Digital Image Correlation Technique Applied to Laminated Glass Plates Under Free Air Blast Loading FACULTY OF ENGINEERING & ARCHITECTURE Digital Image Correlation Technique Applied to Laminated Glass Plates Under Free Air Blast Loading Sam Van Dam 1, Joren Pelfrene 1 & Wim Van Paepegem 1 Bachir Belkassem

More information

Analysis of Composite Materials with Abaqus

Analysis of Composite Materials with Abaqus Analysis of Composite Materials with Abaqus 2016 About this Course Course objectives Upon completion of this course you will be able to: Define anisotropic elasticity for combining the fiber-matrix response

More information

2nd Annual Conference Global Automotive Lightweight Materials Initiative Summit

2nd Annual Conference Global Automotive Lightweight Materials Initiative Summit 2nd Annual Conference Key Practical Points of the Summit: Optimizing Cost-Effective Materials and Process Technologies Using Lightweight Materials for Achieving Greater Energy Efficiency Securing Supply

More information

SIMULIA TOSCA STRUCTURE THE STRUCTURAL OPTIMIZATION SYSTEM

SIMULIA TOSCA STRUCTURE THE STRUCTURAL OPTIMIZATION SYSTEM SIMULIA TOSCA STRUCTURE THE STRUCTURAL OPTIMIZATION SYSTEM TOSCA STRUCTURE SIMULIA Tosca Structure is a flexible, modular software system for non-parametric structural optimization that provides topology,

More information

Tuesday, November 11: Agenda Overview*

Tuesday, November 11: Agenda Overview* Tuesday, November 11: Agenda Overview* 7:30am 9:00am 9:30am Breakfast in the 3DEXPERIENCE Playground Welcome Bruno Latchague, Senior Executive Vice President, Americas Market and Global Sales Operations

More information

Abaqus Technology Brief. Automobile Roof Crush Analysis with Abaqus

Abaqus Technology Brief. Automobile Roof Crush Analysis with Abaqus Abaqus Technology Brief Automobile Roof Crush Analysis with Abaqus TB-06-RCA-1 Revised: April 2007. Summary The National Highway Traffic Safety Administration (NHTSA) mandates the use of certain test procedures

More information

Programme PhD / Master course Advanced Microscopy and Vital Imaging 2014. Time Item Location 09.00 09.15 Welcome and brief overview of the course

Programme PhD / Master course Advanced Microscopy and Vital Imaging 2014. Time Item Location 09.00 09.15 Welcome and brief overview of the course Programme PhD / Master course Advanced Microscopy and Vital Imaging 2014 Monday, June 2, 2014 09.00 09.15 Welcome and brief overview of the course 09.15 10.00 Basics of Microscopy 10.15 12.45 Practical

More information

mechanical engineering design fem analysis prototypes

mechanical engineering design fem analysis prototypes mechanical engineering design fem analysis prototypes OUR BACKGROUND 50 For over a half century the Studio Tecnico Zocca has focused on the planning, analysis, calculation, design and construction of machines

More information

Award given to; Hayley Wyatt. To attend; Computer Methods in Biomechanics and Biomedical Engineering. Mövenpick Hotel, Amsterdam, The Netherlands

Award given to; Hayley Wyatt. To attend; Computer Methods in Biomechanics and Biomedical Engineering. Mövenpick Hotel, Amsterdam, The Netherlands Award given to; Hayley Wyatt To attend; 12 th International Symposium Computer Methods in Biomechanics and Biomedical Engineering Mövenpick Hotel, Amsterdam, The Netherlands Hosted by; The Biomedical Engineering

More information

SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS

SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS SOLIDWORKS CAD Software Course Index Course Number Course Title Course Length 100 SOLIDWORKS

More information

Predictive Modeling of Composite Materials & Structures: State-of-the-Art Solutions and Future Challenges.

Predictive Modeling of Composite Materials & Structures: State-of-the-Art Solutions and Future Challenges. Predictive Modeling of Composite Materials & Structures: State-of-the-Art Solutions and Future Challenges. Roger A. Assaker Roger.Assaker@e-Xstream.com www.e-xstream.com Short Abstract Computer Aided Engineering

More information

FINE TM /Marine. CFD Suite for Marine Applications. Advanced Development for Better Products. www.numeca.com

FINE TM /Marine. CFD Suite for Marine Applications. Advanced Development for Better Products. www.numeca.com FINE TM /Marine CFD Suite for Marine Applications Advanced Development for Better Products www.numeca.com FINE TM /Marine FINE /Marine is a unique integrated CFD software environment for the simulation

More information

An Integrated Optimization System for ANSYS Workbench Based on ACT

An Integrated Optimization System for ANSYS Workbench Based on ACT An Integrated Optimization System for ANSYS Workbench Based on ACT Manfred Fritsch, Business Development FE-DESIGN GmbH Germany FE-DESIGN Optimization Inc Chicago USA AGENDA FE-DESIGN the optimization

More information

Powering up your ENERGY business processes

Powering up your ENERGY business processes Powering up your ENERGY business processes Powering up your ENERGY business processes In these diffi cult economic times where ecological concerns are rapidly increasing, companies race to optimize performance

More information

James L. Salmon, Ph.D., P.E. Senior Engineer 513-376-7974 direct 513-254-5949 mobile jsalmon@caulfieldeng.com PROFESSIONAL EXPERIENCE

James L. Salmon, Ph.D., P.E. Senior Engineer 513-376-7974 direct 513-254-5949 mobile jsalmon@caulfieldeng.com PROFESSIONAL EXPERIENCE James L. Salmon, Ph.D., P.E. 513-376-7974 direct 513-254-5949 mobile jsalmon@caulfieldeng.com PROFESSIONAL EXPERIENCE Current Caulfield Engineering, LLC Naperville, Illinois Dr. Salmon specializes in the

More information

Nordiske Kompositdage 2008. Aalborg University 26-27. August 2008

Nordiske Kompositdage 2008. Aalborg University 26-27. August 2008 Nordiske Kompositdage 2008 Aalborg University 26-27. August 2008 Department of Mechanical Engineering Aalborg University (www.me.aau.dk) Ole Thybo Thomsen Head of Department, Professor, Ph.D. ott@ime.aau.dk

More information

Co-located with: 5. Innovative. Aircraft Seating 2014 AIRCRAFT CABIN Composites & Lightweight Materials

Co-located with: 5. Innovative. Aircraft Seating 2014 AIRCRAFT CABIN Composites & Lightweight Materials Co-located with: 5 th International Conference Aircraft Seating 2014 Save weight Reduce costs Ensure operational excellence 27 29 October 2014 Radisson BLU Hotel, Hamburg Airport, Conference Chairman:

More information

Modeling Stents Using Abaqus

Modeling Stents Using Abaqus Day 1 Lecture 1 Introduction Lecture 2 Geometry and Meshing Lecture 3 Element Selection and Mesh Convergence Workshop 1a Balloon-expanded stent geometry and meshing Workshop 1b Self-expanding stent geometry

More information

Types of Engineering Jobs

Types of Engineering Jobs What Do Engineers Do? Engineers apply the theories and principles of science and mathematics to the economical solution of practical technical problems. I.e. To solve problems Often their work is the link

More information

Heat Transfer and Thermal-Stress Analysis with Abaqus

Heat Transfer and Thermal-Stress Analysis with Abaqus Heat Transfer and Thermal-Stress Analysis with Abaqus 2016 About this Course Course objectives Upon completion of this course you will be able to: Perform steady-state and transient heat transfer simulations

More information

Graduate Courses in Mechanical Engineering

Graduate Courses in Mechanical Engineering Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation

More information

Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology. Graduate Program (S.M., Ph.D., Sc.D.

Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology. Graduate Program (S.M., Ph.D., Sc.D. Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology Graduate Program (S.M., Ph.D., Sc.D.) Field: Air-Breathing Propulsion Date: September 4, 2007 Introduction

More information

New York State Online & Blended Learning Summit 2

New York State Online & Blended Learning Summit 2 New York State Online & Blended Learning Summit 2 University at Albany Albany, NY September 14, 2011 Overview Online and blended learning expand educational opportunities and improve outcomes for a wide

More information

Simulating Composite Materials and Structures

Simulating Composite Materials and Structures Announcement & Call for Papers for the NAFEMS NORDIC Seminar: In Cooperation with Simulating Composite Materials and Structures 2 nd 3 rd December 2009, Esbjerg, Denmark Postponed to 2 nd 3 rd February

More information

Impact Analysis on Car Bumper by varying speeds using Materials ABS Plastic and Poly Ether Imide by Finite Element Analysis software Solid works

Impact Analysis on Car Bumper by varying speeds using Materials ABS Plastic and Poly Ether Imide by Finite Element Analysis software Solid works Vol.3, Issue.1, Jan-Feb. 2013 pp-391-395 ISSN: 2249-6645 Impact Analysis on Car Bumper by varying speeds using Materials ABS Plastic and Poly Ether Imide by Finite Element Analysis software Solid works

More information

The Art of Safe Landings

The Art of Safe Landings The Art of Safe Landings Reliable. From landing to take-off. Over 100 years of experience... In 1911, 21 year-old Anthony Fokker flew his home-built aircraft over the city of Haarlem. In 1919, one of the

More information

Materials. Testing Software Data Infrastructure

Materials. Testing Software Data Infrastructure + technical center for materials a DatapointLabs affiliate materialsphere Materials Testing Software Data Infrastructure Providing an Experimental Basis in Support of FEA Hubert Lobo Heritage 1986 - Cornell

More information

AOTrauma Europe Grant Writing Course

AOTrauma Europe Grant Writing Course Program AOTrauma Europe Grant Writing Course November 1, 2015 Zürich, Switzerland Hotel Marriott, Zürich Home to Trauma & Orthopedics Course prerequisite: Prepare a short description of your clinical study

More information

Main Conference Agenda

Main Conference Agenda Sponsored by: (Co-located with Bioequivalence: Intersection between Science & Regulatory Conference) Main Conference Agenda Day One Wednesday, November 5 th, 2014 7:30 Registration Opens & Continental

More information

Engineering Software Manufacturing Training. The Experts in Turbomachinery

Engineering Software Manufacturing Training. The Experts in Turbomachinery The Experts in Turbomachinery Improving the design and manufacturability of compressors, pumps, gas turbines, steam turbines, fans, blowers, and turbochargers. Engineering Software Manufacturing Training

More information

Aerospace Structures and Materials

Aerospace Structures and Materials Aerospace Structures and Materials MSc Programme Dr. Ir. Otto Bergsma 19-4-2011 Delft University of Technology Challenge the future Contents Our master track objectives The educational programme Our research

More information

Plastics & Rubber Testing Solutions

Plastics & Rubber Testing Solutions Plastics & Rubber Testing Solutions MTS MATERIALS TESTING SOLUTIONS be certain. Plastics and rubber are used in almost all aspects of our daily lives. They have revolutionized consumer products and transformed

More information

Centre for Automotive Technology (CAT) School of Applied Science. Sustainable Automotive Solutions www.cranfield.ac.

Centre for Automotive Technology (CAT) School of Applied Science. Sustainable Automotive Solutions www.cranfield.ac. Centre for Automotive Technology (CAT) School of Applied Science Sustainable Automotive Solutions www.cranfield.ac.uk/sas/automotive Professor Kambiz Kayvantash k.kayvantash@crannfield.ac.uk A global approach

More information

Authorized fe-safe Reseller. Durability Analysis Software for Finite Element Models

Authorized fe-safe Reseller. Durability Analysis Software for Finite Element Models Authorized Reseller Overview Introduction Safe Technology is the technical leader in the design and development of durability analysis software and is dedicated to meeting its customers' most demanding

More information

1 Wärtsilä 6.8.2015 SUSA Field Services/N.V.Newaskar. Introduction

1 Wärtsilä 6.8.2015 SUSA Field Services/N.V.Newaskar. Introduction 1 Wärtsilä 6.8.2015 SUSA Field Services/N.V.Newaskar Introduction Wärtsilä Field Services We support our customers throughout the lifecycle of their installations by optimizing efficiency and performance.

More information

MASTER OF ENGINEERING Mechanical Engineering Program

MASTER OF ENGINEERING Mechanical Engineering Program MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.

More information

fe-safe DURABILITY ANALYSIS SOFTWARE FOR FINITE ELEMENT MODELS

fe-safe DURABILITY ANALYSIS SOFTWARE FOR FINITE ELEMENT MODELS fe-safe DURABILITY ANALYSIS SOFTWARE FOR FINITE ELEMENT MODELS FE-SAFE OVERVIEW fe-safe is the technical leader in fatigue analysis software for Finite Element models. It offers its users the most accurate

More information

Finite Element Analysis

Finite Element Analysis Finite Element Analysis (MCEN 4173/5173) Instructor: Dr. H. Jerry Qi Fall, 2006 What is Finite Element Analysis (FEA)? -- A numerical method. -- Traditionally, a branch of Solid Mechanics. -- Nowadays,

More information

POWER TRAINING TECHNICIANS FOR WIND TURBINES INSPECTION, REPAIR AND MAINTENANCE

POWER TRAINING TECHNICIANS FOR WIND TURBINES INSPECTION, REPAIR AND MAINTENANCE TO THE WIND POWER INDUSTRY The training is organized in one of the most modern training centers Only modern and innovative materials, tools and equipment are being used. All training classes and laboratories

More information

Job training opportunities

Job training opportunities FRAUNHOFER INSTITUTE FOR ENVIRONMENTAL, SAFETY AND ENERGY TECHNOLOGY UMSICHT Job training opportunities Those who have the choice quite often are spoilt for choices. To provide you with an overview of

More information

Stakeholders meeting. Ethical protocols and standards for research in Social Sciences today

Stakeholders meeting. Ethical protocols and standards for research in Social Sciences today Stakeholders meeting organised by the Scientific Committee for the Social Sciences Ethical protocols and standards for research in Social Sciences today Date: Thursday 11 June 2015, from 10.00 to 17.00

More information

Structural Dynamics and Monitoring of Bridges and Flexible Structures against Wind Hazards

Structural Dynamics and Monitoring of Bridges and Flexible Structures against Wind Hazards Second United States Japan Workshop on Structural Dynamics and Monitoring of Bridges and Flexible Structures against Wind Hazards November 12-14, 2011 Venue:, 360 Huntington Avenue, Boston MA Stearns Research

More information

ANTENNAS FOR AEROSPACE AND DEFENSE

ANTENNAS FOR AEROSPACE AND DEFENSE ANTENNAS FOR AEROSPACE AND DEFENSE Applying TE s Leading Consumer and Composite Technologies to Deliver Lighter, Smaller Solutions for Harsh Environments in Aerospace and Defense Advanced Antennas The

More information

Sixth Annual Stakeholders Briefing Hilton Atlanta Airport Hotel Atlanta, Georgia March 9 10, 2011

Sixth Annual Stakeholders Briefing Hilton Atlanta Airport Hotel Atlanta, Georgia March 9 10, 2011 Sixth Annual Stakeholders Briefing Hilton Atlanta Airport Hotel Atlanta, Georgia March 9 10, 2011 SPONSORS Southern States Energy Board 6325 Amherst Court Norcross, Georgia 30092 www.secarbon.org March

More information

Faculty. Guest Faculty. Faculty. Planning Committee. Steve Casey, M.A. Casey Psychological Associates, Inc. Marc Kaufman, C.P.O.

Faculty. Guest Faculty. Faculty. Planning Committee. Steve Casey, M.A. Casey Psychological Associates, Inc. Marc Kaufman, C.P.O. Faculty Guest Faculty Janice E. Brunstrom, M.D. Director of Pediatric Neurology Cerebral Palsy Center St.Louis Children s Hospital Neurologist, Neurobiologist Assistant Professor in the Departments of

More information

FLACS TRAINING OVERVIEW

FLACS TRAINING OVERVIEW FLACS TRAINING OVERVIEW FLACS SOFTWARE FLACS Software is focusing on producing and distributing a complete and advanced, well validated and recognized software solution for CFD modeling in ventilation,

More information

HOTEL DISTRIBUTION CHALLENGES

HOTEL DISTRIBUTION CHALLENGES HOTEL DISTRIBUTION CHALLENGES In order to be prepared for your next Request for Proposal sessions with the hotels, BATM will organize this Forum around what will be the next remit of the travel management

More information

www.allegrodev.com/allegro-u Training & Certification Allegro University

www.allegrodev.com/allegro-u Training & Certification Allegro University www.allegrodev.com/allegro-u Training & Certification Allegro University Two Types of Training Available Allegro training is available in a variety of training formats to provide students with flexible

More information

MANUFACTURING SOLUTIONS

MANUFACTURING SOLUTIONS MANUFACTURING SOLUTIONS REAL-WORLD SOLUTIONS FROM INNOVATIVE PEOPLE NAIT Shell Manufacturing Centre Our innovative facility, believed to be the first of its kind in Canada, offers a unique combination:

More information

The DTU 10-MW Reference Wind Turbine

The DTU 10-MW Reference Wind Turbine Downloaded from orbit.dtu.dk on: Nov 22, 2015 The DTU 10-MW Reference Wind Turbine Bak, Christian; Zahle, Frederik; Bitsche, Robert; Kim, Taeseong; Yde, Anders; Henriksen, Lars Christian; Hansen, Morten

More information

Linear Dynamics with Abaqus

Linear Dynamics with Abaqus Linear Dynamics with Abaqus 2016 About this Course Course objectives Upon completion of this course you will be able to: Extract eigenmodes about a certain frequency Determine whether the number of extracted

More information

Simulating Composite Materials and Structures

Simulating Composite Materials and Structures Invitation and Agenda to the NAFEMS NORDIC Seminar: In Cooperation with Simulating Composite Materials and Structures 2 nd 3 rd February 2010 Esbjerg, Denmark Invitation Sponsors Composite structures or

More information

MECHANICAL ENGINEERING

MECHANICAL ENGINEERING MECHANICAL ENGINEERING Prof.dr.ir. André de Boer Program director Mechanical Engineering Dr. Genie Stoffels Program coordinator Mechanical Engineering 19/11/2015 1 CONTENT MASTER MECHANICAL ENGINEERING

More information

THE EVENT THE TOPICS. 6 th BETA CAE International Conference 10-12 June 2015

THE EVENT THE TOPICS. 6 th BETA CAE International Conference 10-12 June 2015 THE EVENT Already a landmark event in the calendar of CAE professionals, our International conference celebrates this summer its 10th year. Being grateful to the contributors, the participants, and the

More information

EBM Panelists (Delcie Durham, NSF)

EBM Panelists (Delcie Durham, NSF) Environmentally Benign Manufacturing Introduction to EBM Panel Tim Gutowski Director- MIT Lab for Manufacturing and Productivity Massachusetts Institute of Technology 77 Mass. Ave. Room 35-234 Cambridge,

More information

SWISS SOCIETY FOR BIOMATERIALS AND REGENERATIVE MEDICINE NEWSLETTER

SWISS SOCIETY FOR BIOMATERIALS AND REGENERATIVE MEDICINE NEWSLETTER President: Dr. Paul-Henri Vallotton, Vice President: Dr. Katharina Maniura, Treasurer: Dr. Giancarlo Rizzoli, Secretary: Dr. Christine Wandrey, http://ssb.biomaterials.ch SWISS SOCIETY FOR BIOMATERIALS

More information

INTERNATIONAL GRADUATE PROGRAMMES

INTERNATIONAL GRADUATE PROGRAMMES University of Trento Department of Industrial Engineering INTERNATIONAL GRADUATE PROGRAMMES MASTERMAT - MATERIALS ENGINEERING MASTERMECH - MECHATRONICS ENGINEERING international.unitn.it/mastermat international.unitn.it/mastermech

More information

Madrid LNG & SHIPPING Forum

Madrid LNG & SHIPPING Forum The Premier International LNG & SHIPPING conference in Spain Madrid LNG & SHIPPING Forum 2 nd Edition 30 th 31 st May. Hotel Husa Princesa, Madrid SUMMIT GUIDE Host Sponsors www.ingenierojorgejuan.com/lng_madrid

More information

Business & Knowledge in the Climate-KIC

Business & Knowledge in the Climate-KIC Business & Knowledge in the Climate-KIC The first Gothenburg Symposium 12th June 2014, Lindholmen #ClimateKIC @ClimateKIC Climate -KIC The Climate-KIC is Europe s largest public-private innovation partnership

More information

Image Based-Mesh Generation for realistic Simulation of thetranscranial Current Stimulation

Image Based-Mesh Generation for realistic Simulation of thetranscranial Current Stimulation Presented at the COMSOL Conference 2008 Hannover Image Based-Mesh Generation for realistic Simulation of thetranscranial Current Stimulation Ash Harkara Business Manager Presentation overview Company overview

More information

Composite Materials. Capability Statement

Composite Materials. Capability Statement Composite Materials Capability Statement 2 Arup is an independent consultancy employing over 11,000 professional staff in more than 35 countries around the world. Introduction Arup is an independent firm

More information

Faculty of Aerospace Engineering

Faculty of Aerospace Engineering Delft University of Technology Dr. ir. Roeland De Breuker and Dr. Arvind Rao 20-3-2013 Delft University of Technology Challenge the future Delft University of Technology General Information Founded in

More information

Orthopedic. Nursing Symposium HOAG ORTHOPEDIC INSTITUTE AND THE ORANGE COUNTY CHAPTER OF NAON PRESENTS: 7 TH ANNUAL MONDAY, OCTOBER 26, 2015 8 AM 4 PM

Orthopedic. Nursing Symposium HOAG ORTHOPEDIC INSTITUTE AND THE ORANGE COUNTY CHAPTER OF NAON PRESENTS: 7 TH ANNUAL MONDAY, OCTOBER 26, 2015 8 AM 4 PM HOAG ORTHOPEDIC INSTITUTE AND THE ORANGE COUNTY CHAPTER OF NAON PRESENTS: 7 TH ANNUAL Orthopedic Nursing Symposium MONDAY, OCTOBER 26, 2015 8 AM 4 PM HOAG HOSPITAL IRVINE AUDITORIUM 16200 SAND CANYON AVE.

More information

BIOVIA: SCIENTIFIC INNOVATION IN THE AGE OF EXPERIENCE A NEW SCIENTIFIC COLLABORATIVE ENVIRONMENT

BIOVIA: SCIENTIFIC INNOVATION IN THE AGE OF EXPERIENCE A NEW SCIENTIFIC COLLABORATIVE ENVIRONMENT BIOVIA: SCIENTIFIC INNOVATION IN THE AGE OF EXPERIENCE A NEW SCIENTIFIC COLLABORATIVE ENVIRONMENT A NOTE FROM MAX BIOVIA CEO Industries needing science to create products and advance innovation require

More information

BI & IM SYMPOSIUM CALL FOR SPONSORS

BI & IM SYMPOSIUM CALL FOR SPONSORS BI & IM SYMPOSIUM CALL FOR SPONSORS 24 TH AND 25 TH OF NOVEMBER 2014 By participating as a sponsor to the Business Intelligence & Information Management Symposium 2014 you have access to high level contacts

More information

Eulerian-Domain shape optimization for airbag deployment

Eulerian-Domain shape optimization for airbag deployment Eulerian-Domain shape optimization for airbag deployment Jean-Jacques Bernies, Michael Wick, Norbert-Attila Ionas, Nicolas Bonnin, Dr. Doris Ruckdeschel Affiliation of Authors Abstract: The Coupling-Eulerian-Lagrange

More information

RENKEI Aerospace Engineering Workshop: Engaging with Industry

RENKEI Aerospace Engineering Workshop: Engaging with Industry RENKEI Aerospace Engineering Workshop: Engaging with Industry 14th-18th March 2016 University of Southampton University of Bristol Working in collaboration with: Nagoya University RENKEI British Council

More information

NAPA/MAESTRO Interface. Reducing the Level of Effort for Ship Structural Design

NAPA/MAESTRO Interface. Reducing the Level of Effort for Ship Structural Design NAPA/MAESTRO Interface Reducing the Level of Effort for Ship Structural Design 12/3/2010 Table of Contents Introduction... 1 Why Create a NAPA/MAESTRO Interface... 1 Level of Effort Comparison for Two

More information

Pi Tau Sigma National Convention Report 2015. University of Illinois at Urbana-Champaign

Pi Tau Sigma National Convention Report 2015. University of Illinois at Urbana-Champaign Pi Tau Sigma National Convention Report 2015 University of Illinois at Urbana-Champaign Convention Summary After a snowy day of travel, the Centennial Pi Tau Sigma National Convention began. Once the University

More information

Introduction to the Siemens PLM End to End Solution for Composites

Introduction to the Siemens PLM End to End Solution for Composites Introduction to the Siemens PLM End to End Solution for Composites Restricted Siemens AG 2014 2013 All rights reserved. Page 1 Siemens PLM is Dedicated to the Future of Lightweight Engineering Bringing

More information

Ipsen delivers Innovation

Ipsen delivers Innovation Ipsen delivers Innovation TITAN delivers Simplicity Ipsen dreamed of engineering a vacuum furnace that was cost effective to produce, deliver and operate. A vacuum furnace that was easy to install and

More information

Simulating Composite Materials and Structures

Simulating Composite Materials and Structures Pre-announcement & Call for Papers for the NAFEMS NORDIC Seminar: In Cooperation with Simulating Composite Materials and Structures Composite structures or components are increasingly use as primary load

More information

Studying the EU: Current and Future Challenges

Studying the EU: Current and Future Challenges Studying the EU: Current and Future Challenges JOINT CONFERENCE EUI CoE 3-4 DECEMBER 2015 Florence OBJECTIVE OF THE CONFERENCE The College of Europe and the European University Institute are sister institutions;

More information

ELECTRICAL & POWER DISTRIBUTION

ELECTRICAL & POWER DISTRIBUTION ELECTRICAL & POWER DISTRIBUTION END-TO-END ELECTRICAL WIRING INTERCONNECTION SYSTEMS (EWIS) Complete EWIS System Design Harness Installation Design Reconciliation of Wiring Diagrams (2D) & Harness Design

More information

Materials Specifications Manager

Materials Specifications Manager Materials Specifications Manager Hubert Lobo + technical center for materials a DatapointLabs affiliate materialsphere Materials Testing Software Data Infrastructure Heritage 1986 - Cornell Injection Molding

More information

Emerging Technology Trends in Wind Energy Market

Emerging Technology Trends in Wind Energy Market Emerging Technology Trends in Wind Energy Market Webinar May 28, 2009 (9:00 am 11:30 am EST) Technological advancements & innovation - Changing rules and bottom line impact Research and technology trends

More information

Advanced Systems & Equipment

Advanced Systems & Equipment Advanced Systems & Equipment Flotation Systems Utilising extensive experience gained from over 70 years of innovation, GKN Aerospace - Portsmouth is a leading supplier of inflatable recovery systems and

More information

Introduction to Aerospace Engineering

Introduction to Aerospace Engineering Introduction to Aerospace Engineering Lecture slides Challenge the future 1 Material types Metals, polymers, ceramics, composites Faculty of Aerospace Engineering 6-12-2011 Delft University of Technology

More information

training programme catalogue WÄRTSILÄ LAND & SEA ACADEMY TRAINING PROGRAMME CATALOGUE

training programme catalogue WÄRTSILÄ LAND & SEA ACADEMY TRAINING PROGRAMME CATALOGUE 2011 training WÄRTSILÄ LAND & SEA ACADEMY programme catalogue TRAINING PROGRAMME CATALOGUE Table of contents GENERAL information... 4 WÄRTSILÄ PRODUCT COURSES (4-STROKE)... 6 WÄRTSILÄ PRODUCT COURSES (2-STROKE)...

More information

Welcome to the Celsius Linné e Science Day February 15, 2013

Welcome to the Celsius Linné e Science Day February 15, 2013 Welcome to the Celsius Linné e Science Day February 15, 2013 Science at the Edge of Computing A multi disciplinary symposium on new avenues for high performance computing and data handling in research

More information

Foundation Year for Engineering, Physics and Geophysics. Faculty of Engineering, Science and Mathematics

Foundation Year for Engineering, Physics and Geophysics. Faculty of Engineering, Science and Mathematics Foundation Year for Engineering, Physics and Geophysics Faculty of Engineering, Science and Mathematics Development of electronic technology Who is the course for? The Foundation Year is the first year

More information

SPONSORSHIP PROSPECTUS

SPONSORSHIP PROSPECTUS SPONSORSHIP PROSPECTUS Integrating Energy for the Quality of Life The Smart Grid Interoperability Panel (SGIP) is a consortium that securely accelerates and advances Grid Modernization through interoperability

More information

joining expertise at the service of the plastic converting industry

joining expertise at the service of the plastic converting industry joining expertise at the service of the plastic converting industry VKC-CENTEXBEL Etienne Sabbelaan 49 BE-8500 Kortrijk phone +32 56 29 27 00 fax +32 56 29 27 01 info@vkc.be www.vkc.be VAT BE 0459.218.289

More information

A Big Data Workshop introducing a smarter decision methodology for your organisation through advanced analytics and career opportunity

A Big Data Workshop introducing a smarter decision methodology for your organisation through advanced analytics and career opportunity Advanced Analytics Institute (AAI) http://analytics.uts.edu.au/index.html Big Data Workshop - Smarter Decisions and Careers in Data A Big Data Workshop introducing a smarter decision methodology for your

More information

The Westin Oaks Houston at the Galleria, 5011 Westheimer at Post Oak, Houston, TX

The Westin Oaks Houston at the Galleria, 5011 Westheimer at Post Oak, Houston, TX The Westin Oaks Houston at the Galleria, 5011 Westheimer at Post Oak, Houston, TX Day 1 Regional Seminar Presentation (9 AM 5 PM) Day 2 Training (9 AM 12:30 PM) 2015 OSIsoft Regional Seminar: The Westin

More information

Check list for CEU Application. CEU application filled out completely. $75.00 administrative fee (made payable to ETSU)

Check list for CEU Application. CEU application filled out completely. $75.00 administrative fee (made payable to ETSU) Check list for CEU Application Have you included the following: CEU application filled out completely $75.00 administrative fee (made payable to ETSU) Or, call 423-439-8266 with a credit card DRAFT of

More information

London, United Kingdom

London, United Kingdom The European Biopolymer Summit DAY 1 Wednesday 9th 08:00 09:00 09:15 10:00 REGISTRATION & COFFEE CHAIRMAN'S OPENING REMARKS Henri Colens Public Affairs Manager Market study & trend reports on bio-based

More information

Autodesk Inventor 2013

Autodesk Inventor 2013 Autodesk Inventor 2013 AMS CAD + CAFM Solutions amscad.com Image courtesy of Brimrock Group Inc. and Mechanix Design Solutions Inc. Autodesk Inventor Takes You From 2D to 3D Digital Prototyping The Inventor

More information

Tried and trusted. An introduction to Exova

Tried and trusted. An introduction to Exova Tried and trusted An introduction to Exova 1 A leader in testing, calibrating and advising Exova is one of the world s leading providers of testing, calibration and advisory services Headquartered in the

More information

Workforce Development. Tom Rogers Director, Workforce Development IACMI

Workforce Development. Tom Rogers Director, Workforce Development IACMI Workforce Development Tom Rogers Director, Workforce Development IACMI Workforce Development Tom Rogers Workforce Development Director January 14, 2016 IACMI s workforce development goals: To establish

More information

Removing barriers to Cloud Computing in Europe Open Workshop

Removing barriers to Cloud Computing in Europe Open Workshop Removing barriers to Cloud Computing in Europe Open Workshop SMART 2011/0045 - Open workshop By David Bradshaw, Gabriella Cattaneo, Giuliana Folco, IDC Thursday May 10, 2012- Brussels Copyright IDC. Reproduction

More information

Simulation Platform Overview

Simulation Platform Overview Simulation Platform Overview Build, compute, and analyze simulations on demand www.rescale.com CASE STUDIES Companies in the aerospace and automotive industries use Rescale to run faster simulations Aerospace

More information

Procedures and Criteria for Training and Certification Renewal

Procedures and Criteria for Training and Certification Renewal Procedures and Criteria for Training and Certification Renewal Illinois EPA Drinking Water Operator Certification Program Procedures and Criteria for Training and Certification Renewal Renewal Training

More information

Coperion Polyolefin Technology. Coperion. > Coperion Polyolefin Technology Conference 2012. Conference information 2012-12-3-4 2012-12-3-4

Coperion Polyolefin Technology. Coperion. > Coperion Polyolefin Technology Conference 2012. Conference information 2012-12-3-4 2012-12-3-4 > Conference 2012 Conference information > Agenda Conference day 1 Dec 3, 2012 07:45 am Registration 08:30 am Welcome and introduction Ulrich Bartel I President and CEO I USA 08:50 am Polyolefin projects

More information

PRODUCT INFORMATION. Range of HUMS and Engine-monitoring Accelerometers Type 4511-001, 4511-006, 4523, 8345 and 8347-C.

PRODUCT INFORMATION. Range of HUMS and Engine-monitoring Accelerometers Type 4511-001, 4511-006, 4523, 8345 and 8347-C. PRODUCT INFORMATION Range of HUMS and Engine-monitoring Accelerometers Type 4511-001, 4511-006, 4523, 8345 and 8347-C Health Usage Monitoring Systems (HUMS) are being used more frequently in monitoring

More information

www.questevents.com.au

www.questevents.com.au and the implications for Australian gas exports and project viability Sponsorship and Exhibition Opportunities Organised by: EXAMINING THE IMPLICATIONS OF GLOBAL ENERGY MARKET MOVEMENTS FOR AUSTRALIAN

More information

Service Training Catalog 2013

Service Training Catalog 2013 Service Training Catalog 2013 The information in this publication covers Philips Respironics training courses at the time of this publication. Service Business reserves the right to make changes to these

More information

Email Retention. A Workshop on Email Retention Policies:- The risks, possible approaches and implementation issues

Email Retention. A Workshop on Email Retention Policies:- The risks, possible approaches and implementation issues Introduction Most inter- and intra-business communication takes place by email. The bases for critical decisions and contractual agreements are often only documented in email. Courts both in Europe and

More information

Additive manufacturing met metaal Trends & ontwikkelingen en de kansen voor de maakindustrie

Additive manufacturing met metaal Trends & ontwikkelingen en de kansen voor de maakindustrie Additive manufacturing met metaal Trends & ontwikkelingen en de kansen voor de maakindustrie Bert Thuis bert.thuis@nlr.nl Nationaal Lucht- en Ruimtevaartlaboratorium National Aerospace Laboratory NLR Overview

More information

GOM Optical Measuring Techniques. Deformation Systems and Applications

GOM Optical Measuring Techniques. Deformation Systems and Applications GOM Optical Measuring Techniques Deformation Systems and Applications ARGUS Forming Analysis ARGUS Deformation analysis in sheet metal and forming industry Forming Characteristics of Sheet Metals Material

More information