1 0 WD Sentinel DX4000 Small Office Storage Server Administrator s Quick Install Guide
2 1 Introduction This quick install guide steps the Administrator through the procedures for setting up the WD Sentinel server and connecting a Windows PC and then a Mac computer to it. Note: Before connecting a Mac computer to the WD Sentinel server, you must connect and configure the WD Sentinel server with a Windows PC. How the WD Sentinel Fits into Your Office
3 2 User Types Administrator (e.g., Business Owner) Primary Setup Tasks Physically connects the WD Sentinel server to the network. Configures the WD Sentinel server itself. This is a one-time procedure. Connects a Windows PC to the WD Sentinel server by installing Connector software on it. Primary Interface Dashboard Logs in using the Administrator password (no username required). Users (e.g., Employees) Primary Interface Launchpad Logs in using the assigned user name and password. Primary Launchpad Tasks Accesses data on shared storage. Starts manual backups. Connects to the WD Sentinel server by Remote Web Access. Primary Dashboard Tasks Sets up user accounts and assigns permissions. Manages shared folders. Sets up and manages automatic backup schedule. Manages WD Sentinel server settings, resolves any alerts, and monitors server performance. Sets up Remote Web Access. Manages updates.
4 3 System Requirements Local Network Router/switch (Gigabit recommended to maximize performance) DHCP enabled Client Computer Client Operating System Compatibility A client computer running one of the Windows operating systems listed below. Windows XP SP3 (32 bit)/windows Vista SP2 (32 or 64 bit)/ Windows 7 (32 or 64 bit) any version Mac OS 10.5 Leopard /Snow Leopard Broadband Access Required for remote access outside the LAN Box Contents WD Sentinel DX4000 AC adapter Ethernet cable Quick Install Guide
5 4 Views Front Power/Status LED Power button Drive status LEDs Scroll buttons Back Power ports 1 & 2 USB ports 1 & 2 Ethernet ports 1 & 2 Reset/Recovery button Kensington Security Lock
6 5 Step 1: Connect WD Sentinel DX4000 to Your Network Using the provided Ethernet cable, connect the WD Sentinel server (either Ethernet port) to a DHCP-enabled LAN. 2. Using the provided AC power adapter, connect the WD Sentinel server (either power port) to an electrical outlet or a UPS.
7 6 3. Press the on/off button for one second one time to power up the WD Sentinel server. 4. Wait for the LCD on the front of the WD Sentinel server to display WDSENTINEL and the IP address before configuring the server. WARNING! This process takes a few minutes. Do not interrupt the process. Do not power off or disconnect the WD Sentinel server. Wait until you see WDSENTINEL and the IP address. Step 2. Set up WD Sentinel Server (one time only) Your WD Sentinel DX4000 server is ready to be configured. This section describes how to use the one time setup wizard to configure your server for first use. The following steps must be performed on a Windows PC connected to the same network and subnet as your WD Sentinel DX4000 server. 1. Open a browser window and in the address field, enter address>/connect and click Enter to display the setup wizard download screen. Use the IP address shown in the LCD of the WD Sentinel server. Example: 2. Click Download and run the setup wizard. 3. At the warning prompts, click Run or Yes as appropriate.
8 7 4. Verify localization settings, or select correct values from the drop-down lists: 5. Click Next to review the date and time, and then select the checkbox to verify the settings: 6. Click Next to display Microsoft and Western Digital license agreements. Read the agreements and select the checkboxes to accept the license terms:
9 8 7. Click Next to personalize your WD Sentinel server: a. The WD Sentinel server has a default name of WDSENTINEL. Enter a unique name for your WD Sentinel server, for example, Company-Name (must contain 1-12 characters; may be upper case, lower case, numeric, or a combination; may include hyphens but no spaces or special characters). WARNING! THIS IS THE ONLY TIME YOU CAN NAME YOUR WD SENTINEL SERVER. You must assign it a unique name to avoid naming conflicts should you ever have more than one WD Sentinel server on the network. b. Enter and confirm a password (must be at least 8 characters long and contain at least three of the following categories: uppercase letters, lowercase letters, numbers, and symbols; spaces are allowed.) This is the Administrator password. You will use it later to connect the client computers to your WD Sentinel server and to access the Administration Dashboard. c. Enter a hint to remind you of the password. WARNING! If you forget the Administrator password, it may not be possible to recover it, and you could potentially lose all your data. Make sure to record the password and keep it in a safe location.
10 9 8. Click Next to specify how server software updates should occur. Make a selection: Note: If you choose the first or second option on this screen, the subsequent installation process may take longer, depending on Windows updates that may be available at the time. The installation begins. The progress bar on the screen and the LCD of the WD Sentinel server inform you of the installation s progress. Important: This process takes a few minutes. Do not interrupt the process. Do not power off or disconnect the WD Sentinel server. The completion screen appears: Your WD Sentinel server configuration is complete and the server is ready for use!
11 10 9. To connect this current Windows PC computer to your server, leave the Connect this Computer checkbox selected, click Finish, and proceed to Step 3. Step 3: Connect the First Computer Now connect one Windows PC (most likely the one you have been using) to the WD Sentinel server by installing Connector software on it. Note: Before connecting a Mac computer to the WD Sentinel server, you must first connect and configure the WD Sentinel server using a Windows PC running compatible Windows client OS. Installing the Connector software joins the client computer (Windows PC) to your WD Sentinel Server and installs Launchpad and Dashboard. Users use Launchpad to access server resources they have rights to, and the administrator (you) accesses Dashboard for such tasks as managing the WD Sentinel server, setting up user accounts, and managing access to shared folders. In addition, your WD Sentinel server is configured to automatically back up your Windows PC. Use the following one time procedure for every Windows PC you connect to the WD Sentinel server: 1. Click the Download software for Windows arrow: 2. At the warning prompts, click Run or Yes as appropriate. Note: If prompted to do so, type the user name and password of an account that has administrator permissions on this client computer. An overview of the Connect Computer to the Server wizard displays: 3. Click Next to display information about events that may occur during the installation:
12 4. Click Next to display a progress bar. The installation process may take up to 30 minutes. 5. At the logon screen, enter the Administrator password: 11
13 12 6. Click Next and enter a unique description for your computer so the server will be able to distinguish yours from others on the network: 7. Click Next to display wake-up options, and make a selection:
14 13 8. Click Next to display Microsoft program options, and make a selection: Note: It is a best practice to select the Open Dashboard to administer your server option and launch the Dashboard after finishing the Connector software installation. To take advantage of shared storage capabilities of your WD Sentinel server, on the Dashboard, create a user account and assign access privileges to the shared folders. 9. Click Next. The installation completes. Select the checkbox for opening the Dashboard to configure and monitor the WD Sentinel server. Click Finish: 10. Close the browser. If you selected the checkbox, the Dashboard Sign in screen displays.
15 14 Step 4: Access the Dashboard (Windows PCs Only) and Launchpad You can only access the Dashboard using a Windows PC that is already connected to your WD Sentinel server. The Dashboard Sign in screen appears if you elected it to do so after the Connector software is loaded, or you can navigate to Start or >(All)Program(s) >Windows Storage Server 2008 R2>Windows Storage Server 2008 R2 Dashboard. Dashboard Sign in (Administrators) Using the Dashboard, the Administrator performs administrative tasks such as creating the user accounts, setting up access privileges to shared folders and other server resources, managing shared folders, and monitoring the WD Sentinel server. 1. On the Dashboard Sign in screen, enter the Administrator password.
16 15 2. Click the arrow to display the Dashboard: Best Practices: Complete the Getting Started tasks on the Home page of the Dashboard. Note: For instructions, see the WD Sentinel DX4000 Administration Guide. Create at least one active user account now. Launchpad Sign in (Users) After you set up users with a user name, password, and permissions on the Dashboard, they can access the Launchpad Sign in screen by one of the following methods: On a Windows PC: Right-click the Launchpad icon in your system tray and select Open Launchpad or double-click the Launchpad icon, or Navigate to Start or >(All)Program(s) >Windows Storage Server 2008 R2>Windows Storage Server 2008 R2 Launchpad.
17 16 1. Enter your user name and password. 2. Click the arrow to display the Launchpad. It lists four tasks: Backup, Remote Web Access, Shared Folders, and Dashboard. 3. Click Dashboard to display the Dashboard Sign in screen. Only users with administrative access and knowledge of the Administrator password can sign in. The general user name and password cannot access the Dashboard.
18 17 Step 5: Connect Additional Computers Once you have one Windows PC connected to the WD Sentinel server, you can connect more (25 maximum) Windows PCs or Mac computers to your WD Sentinel server. Connecting More Windows PCs 1. Open Internet Explorer and in the address field, type address>/ connect. Example The LCD of the WD Sentinel server displays the WD Sentinel name and IP address. 2. Repeat Step 3 on page 10 for every Windows PC you want to connect. Connecting Mac Computers After connecting the first computer to the WD Sentinel server (using a Windows PC), you can connect Mac computers: 1. Open Safari and in the address field, type address>/connect, using the IP address shown on the LCD of the WD Sentinel server. Example: 2. Click the Download software for Mac arrow: 3. Select the Connector software to download, and at the Connector for Mac warning prompt, click Open:
19 18 4. Type the user name and password of an account that administers this Mac computer and click OK: 5. The Connect a Computer to the Server wizard has seven screens that are listed on the left. Click Continue to move through them:
20 19 6. Enter the WD Sentinel server s IP address shown on the WD Sentinel server s LCD screen and click Continue: 7. Enter a computer name to uniquely identify the Mac:
21 20 8. Enter the Administrator password for the WD Sentinel server and press Continue: 9. A progress bar appears and then the computer description screen. Enter a unique description of the Mac computer and click Continue:
22 A progress bar shows the status of the installation, and then the Summary screen appears, verifying that the computer is connected to the server. Select the Automatically start Launchpad at startup checkbox. Click Close: The Launchpad Sign in screen displays. Users who have been set up on the Dashboard (using a Windows PC) sign in here: Note: The Dashboard is not accessible from Mac computers. 11. The Launchpad displays three options: Backup, Remote Web Access, and Shared Folders. For information on using these options and for setting up Apple Time Machine, see the WD Sentinel DX4000 Administration Guide. To view the guide, go to
23 22 Rebooting the WD Sentinel Server Following is the cleanest procedure for rebooting the WD Sentinel server using a Windows PC: 1. On the Dashboard Home page, click the Server Settings link on the upper right of the window. 2. On the bottom left of the General screen, click the shutdown arrow and select Restart: WARNING! An unclean shutdown could occur should you hold the power button down for more than 3 seconds. This would result in a system verifcation process that would take a long time.
24 23 Technical Support Services If you encounter problems with this product, please contact WD Technical Support. North America English Spanish Asia Pacific Japan Europe (toll free*) * Austria, Belgium, Denmark, France, Germany, Ireland, Italy, Netherlands, Norway, Spain, Sweden, Switzerland, United Kingdom Europe (non toll free) Middle East Africa Important: To make use of the full capabilities of the WD Sentinel server, see the WD Sentinel DX4000 Administration Guide at
25 24 Information furnished by WD is believed to be accurate and reliable; however, no responsibility is assumed by WD for its use nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of WD. WD reserves the right to change specifications at any time without notice. Western Digital, WD, the WD logo, and My Passport are registered trademarks in the U.S. and other countries; WD Sentinel is a trademark of Western Digital Technologies, Inc. Other marks may be mentioned herein that belong to other companies Western Digital Technologies, Inc. All rights reserved. Western Digital 3337 Michelson Drive Irvine, California U.S.A A00 Sep 2011
Connecting to Remote Desktop Windows Users How to log into the College Network from Home 1. Start the Remote Desktop Connection For Windows XP, Vista and Windows 7 this is found at:- Star t > All Programs
QuarkCopyDesk 9.1 ReadMe CONTENTS Contents QuarkCopyDesk 9.1 ReadMe...4 System requirements...5 System requirements: Mac OS...5 System requirements: Windows...5 Installing: Mac OS...7 Performing a silent
XStream Remote Control: Configuring DCOM Connectivity APPLICATION BRIEF March 2009 Summary The application running the graphical user interface of LeCroy Windows-based oscilloscopes is a COM Automation
USER GUIDE 8x8 User Guide Getting Started with April 2014 Contents Introduction... 3 What s new.... 3 8x8.... 3 Here is how works...4 8x8 Click2Connect.... 4 Requirements.... 4 Installation on Microsoft
CLOUDBOX USER MANUAL CLICK HERE TO ACCESS AN UP-TO-DATE ONLINE VERSION of this document. Online User Manuals feature easy navigation, expandable illustrations, and search capability. 1 INTRODUCTION The
How to Log in to LDRPS-Web v10 (L10) https://enterprise.strohlservices.com Contents First Time Login Instructions... 1 1) Use the Internet Explorer (IE) Web browser*... 1 2) Install the.net Framework...
1-Port Wireless USB 2.0 Print Server Model # APSUSB201W Quick Installation Guide Ver. 2A Section 1 Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and attach the other
User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
Agilent N5970A Interactive Functional Test Software: Installation and Getting Started Application Note The N5970A Interactive Functional Test Software along with the 8960 Series 10 (E5515C) wireless communications
Using Symantec AntiVirus Corporate Edition Version 9.0 Software On a DX8000 DVR DX8000 Digital Video Recorder C1613M-A (12/04) Contents Using Symantec AntiVirus Corporate Edition 9.0 Software.....................................................................5
User Manual 350 East Plumeria Drive San Jose, CA 95134 USA August 2012 202-10933-04 v1.0 Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online,
Remote Desktop Services AMERICAN INSTITUTES FOR RESEARCH AIR REMOTE DESKTOP SERVICES (RDS) GUIDE Overview Welcome to AIR Remote Desktop Services! AIR Remote Desktop Services can be accessed from a Windows
Technical Brief for Windows Home Server Remote Access Microsoft Corporation Published: October, 2008 Version: 1.1 Abstract This Technical Brief provides an in-depth look at the features and functionality
Using Remote Web Workplace Version 1.01 Remote web workplace allows you to access your Windows XP desktop through Small Business Server 2003 from a web browser. 1. Connect to the Internet in your remote
Table of Contents General Information...1 Verify Computer Settings...1 Router Installation...3 Configuring Your Router...3 Configuring Your Computer...7 Configuring Your Email...9 General Information Router
MiraCosta College now offers two ways to access your student virtual desktop. We now feature the new VMware Horizon View HTML access option available from https://view.miracosta.edu. MiraCosta recommends
Hard Drive Interface Guide WD Hard Drive Interface Guide WD Service and Support Should you encounter any problem, please give us an opportunity to address it before returning this product. Most technical
Allworx OfficeSafe Operations Guide Release 6.0 No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy,
How to Connect to Berkeley College Virtual Lab Using Windows Minimum Requirements Create and Save a Remote Desktop Services Connection Connecting to a Remote Desktop Services session Copy Files between
Getting Started with VMware Horizon View (Remote Desktop Access) Use The Links Below To Navigate This Document Using VMware Horizon View with Tablet and Smartphone APP or Mobile Web Browser Walk Through
Version 17.12 Last Updated: August 2012 2012 Verizon. All Rights Reserved. The Verizon names and logos and all other names, logos, and slogans identifying Verizon s products and services are trademarks
P a g e 1 SSL VPN Support Guide Revision date: 5/4/10 P a g e 2 Table of Contents Before calling the Support Desk..pg 3 What the Support Desk can assist users with. pg 4 Instructions for PC users (Internet
Introduction EASYLABEL 6 has several new features for saving the history of label formats. This history can include information about when label formats were edited and printed. In order to save this history,
Cox Business Online Backup Quick Start Guide Release 2.0 Cox Business Online Backup Quick Start Guide i IMPORTANT: You must notify Cox in advance if you would like to move or relocate your telephone Service.
DX8100 Series Symantec AntiVirus Corporate Edition Installation Instructions Version 10.1.6 DX8100 DX8100 Digital Video Recorder C2643M (4/08) Contents Description...........................................................................................................
Nexio Connectus with Nexio G-Scribe 2.1.2 3/20/2014 Edition: A 2.1.2 Publication Information 2014 Imagine Communications. Proprietary and Confidential. Imagine Communications considers this document and
VPN Hello and welcome. In the VPN section we will cover the steps for enabling the VPN feature on the Allworx server and how to set up a VPN connection to the Allworx System from your PC. Page 1 VPN The
Network Setup Guide This manual contains the setup information required to use the machine over wired LAN. If you use the machine with USB connection, refer to your setup sheet. Introduction To use the
CHAPTER 7 This chapter includes the following Content Server maintenance procedures: Backing Up the Content Server, page 7-1 Restoring Files, page 7-3 Upgrading the Content Server, page 7-5 Shutting Down
5big Backup Server DESIGN BY NEIL POULTON Backup Appliance Gigabit Ethernet Quick Start Guide Box Content Your LaCie 5big Backup Server package contains the system tower and an accessories box that includes
owncloud Configuration and Usage Guide This guide will assist you with configuring and using YSUʼs Cloud Data storage solution (owncloud). The setup instructions will include how to navigate the web interface,
SSL VPN Service Note: This guide was written using Windows 7 with Internet Explorer 8. The same principles and techniques are applicable to new versions of Internet Explorer as well as Firefox. Any significant
Windows and MAC User Handbook How to Connect Your PC or MAC Remotely and Securely to Your U.S. Department of Commerce Account Developed for You by the Office of IT Services (OITS)/IT Service Desk *** For
Overview of Help & Tips The new System allows authorized users to log in and access the Firm s network through either Citrix or VPN (also known as Stonegate IPSec VPN). This system incorporates additional
Metasys System Direct Connection and Dial-Up Connection Application Note Code No. LIT-1201639 Software Release 5.1 Issued August 27, 2013 Supersedes October 4 2010 Refer to the QuickLIT website for the
How do I configure the wireless printer using a USB or Ethernet cable and install the printer driver in Windows? STEP I: Gather the wireless network settings of your wireless access point or wireless router
Upgrading Polycom SoundStation2W software to Version 1.607 and CVM to Version 1.85 Installer for Microsoft Windows Vista and Windows 7 (32 and 64 bit) Operating Systems NOTE: Two versions of upgrader are
Reference : USER184 Issue date : December 2002 Revision date : September 2007 Classification : Software Originator : Hugh Burt REVISED DOCUMENT Installing Microsoft Outlook on a Macintosh This document
ReadyNAS Duo Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA February 2008 208-10215-01 v1.0 2008 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR, the NETGEAR logo,
Senior Systems Cloud Services In this guide... Senior Systems Cloud Services 1 Cloud Services User Guide 2 Working In Your Cloud Environment 3 Cloud Profile Management Tool 6 How To Save Files 8 How To
5big Backup Server DESIGN BY NEIL POULTON Backup Appliance Gigabit Ethernet Quick Start Guide Box Content Your LaCie 5big Backup Server package contains the items listed below: 1. LaCie 5big Backup Server
REMOTE ACCESS GUIDE INTRODUCTION This guide provides all of the information necessary to connect to MoFo resources from outside of the office. Connect remotely from your firm notebook using VPN Connect
QuarkXPress 8.01 ReadMe CONTENTS Contents QuarkXPress 8.01 ReadMe...4 System requirements...5 Mac OS...5 Windows...5 Installing: Mac OS...6 Performing a silent installation...6 Preparing for silent installation...6
Operating Instructions Driver Installation Guide For safe and correct use, be sure to read the Safety Information in "Read This First" before using the machine. TABLE OF CONTENTS 1. Introduction Before
Junos Pulse VPN Client Installation Windows 7 Installation p 2-6 Windows 8.1 Installation p 7-11 Macintosh version 10.6 and greater p 12-17 *This vpn appliance is to replace the Legacy SP vpn client Cisco
Apple Time Machine Backing up The Apple Time Machine is a built-in feature on Mac OS X Leopard and Snow Leopard computers that can back up everything on your computer: music, photos, documents, applications,
ACCEPT THE SECURITY CERTIFICATE FOR THE WEB FILTER ACCESS THE WEB FILTER VIA ITS LAN 1 IP ADDRESS ACCEPT THE SECURITY CERTIFICATE FOR THE WEB FILTER Access the Web Filter via its LAN 1 IP Address A. Launch
Network Guide PREFACE Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors
MODEL: MX-M283N MX-M363N MX-M453N MX-M503N DIGITAL MULTIFUNCTIONAL SYSTEM Software Setup Guide BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING
Mac OS VPN Set Up Guide If internet traffic is not being sent over the VPN then go to System Preferences- >Network and click on your VPN connection. Click the "Advanced..." button, and in the "Options"
Symantec PGP Whole Disk Encryption Hands-On Lab V 3.7 Description This hands-on lab session covers the hard drive encryption technologies from PGP. Students will administer a typical Whole Disk Encryption
DAP-1360 Wireless N 300 Access Point & Router BEFORE YOU BEGIN Delivery Package Access point DAP-1360 Power adapter DC 12V Ethernet cable (CAT 5E) (brochure). If any of the items are missing, please contact
Contents Section A Networking Basics...................................... 1 1 Learning the Basics............................................. 3 Selecting a network connection........................................
VMware/Hyper-V Backup Plug-in User Guide COPYRIGHT No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
FAQ How does the new Big Bend Backup (powered by Keepit) work? Once you establish which of the folders on your hard drive you ll be backing up, you ll log into myaccount.bigbend.net and from your control
TA Instruments TRIOS Software Installation Instructions Installation Requirements Your TRIOS Instrument Control software includes all the components necessary to install or update the TRIOS software, as
Important Notes for WinConnect Server VS Software Installation: 1. Only Windows Vista Business, Windows Vista Ultimate, Windows 7 Professional, Windows 7 Ultimate, Windows Server 2008 (32-bit & 64-bit),
NF5 VOIP Setup Guide (for Generic) Configuring your NF5 for VOIP Service The following steps will take you through the process of setting up your VOIP connection. Step 1: Checking Computer Network Settings:
HP MediaSmart Server Software Upgrade from v.1 to v.3 Table of Contents Upgrade Your Server Software to HP MediaSmart Server v.3 2 Before You Begin 3 What's New... 3 Features That Will Change... 4 Prepare
Global VPN Client Getting Started Guide 1 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your system. CAUTION: A CAUTION indicates potential
STATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM Verizon High Speed Internet for Business Verizon High Speed Internet for Business SETTING UP YOUR NEW STATIC IP CONNECTION AND IP ADDRESS(ES) This
EOS Step-by-Step Setup Guide Wireless File Transmitter EOS UTility Mode Infrastructure or Ad Hoc Networks Windows XP / Windows 7 Professional 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in
FreeAgent DockStar Network Adapter User Guide FreeAgent DockStar Network Adapter User Guide 2010 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave logo, and FreeAgent are
First Edition, March 2009 www.moxa.com/product 2009 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. Moxa Device Manager 2.0 User Guide The software described in this manual
NF3ADV VoIP Setup Guide (for TPG) Configuring your NF3ADV for TPG VoIP The following steps will take you through the process of setting up your VoIP connection. This guide assumes that the NF3ADV already
User Manual August 2015 202-11590-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label
Tech Tip 7 64-Bit Compatibility with Micromeritics Applications Micromeritics products are designed to operate in most Microsoft Windows environments. However, more current versions of Microsoft Windows,
Software Version Installation Guide This Installation Guide is an introductory guide to help you start the software-based AT-UWC Wireless LAN Controller. It describes how to run the AT-UWC-Install program
Hallpass Instructions for Connecting to Mac with a Mac The following instructions explain how to enable screen sharing with your Macintosh computer using another Macintosh computer. Note: You must leave
Getting Started with MozyPro Online Backup Online Software from Time Warner Cable Business Class A Guide for Users MozyPro is an online backup service with an easy to use interface so you can start backing
Installing the Virtual Desktop Application (MAC) The folowing instructions will guide you through the process of installing the components necessary to connect in to the NEL B Virtual Desktop environment