Dr. ir. ing. JUAN MANUEL JAUREGUI-BECKER Tel: ,

Transcription

1 Dr. ir. ing. JUAN MANUEL JAUREGUI-BECKER Tel: , Date of birth: 20 May 1980 Citizenships: Dutch, Venezuelan and Spanish. Associations: Venezuelan Engineering Association, Mérida Engineering Association. Assistant Professor: University of Twente, Enschede, The Netherlands. January 2010 Present. Teach several subjects in mechanical engineering and industrial design bachelor and master programs. Research interests include: methods for sustainable knowledge management in product development, computer aided synthesis, complexity management in product design, representations in engineering design. Research/Teaching Assistant: University of Twente, Enschede, The Netherlands. January December Research on engineering design synthesis automation as part of the IOP-IPCR project: Smart Synthesis Tools. Responsibilities included teaching and tutoring activities. Research intern: PHILIPS ATC-DAP, Drachten, The Netherlands. February 2006-April Participated in department designing injection molding systems. Student assistant: University of Twente, Enschede, The Netherlands. October 2004 February Assisted students in the use of laser cutting and laser welding machinery. Self-employed engineer: Merida, Venezuela. March 2003 November Design and inspection of mechanical ventilation systems. Consult on garbage treatment plant production processes and mechanical design. Research intern: University of Cassino, Cassino, Italy. September 2002 February Development of an anthropomorphous robotic hand. Kinematics, electronics and control systems were designed Research Assistant: University of Los Andes/INTEVEP-PDVSA, Merida, Venezuela. October 2001 July Gave technical assistance to students and professors in the laboratory. Participated in the research project: Properties of flux in porous media. PhD in Design theory and methodology: University of Twente, Enschede, The Netherlands. January April Thesis: From How Much To How Many: Complexity Management in Routine Design Automation. M.Sc. in Mechanical automation (GPA: 9/10, Cum Laude): University of Twente, Enschede, The Netherlands. November 2003 January Thesis: Implementation and testing of a control scheme for laser welding (Grade: 9/10) Bachelors in Mechanical Engineering (GPA: 14.6/20): University of Los Andes, Merida, Venezuela. March March Thesis: Mono-phase and non-compressive Flux in Porous Media (Grade: 17/20) LA VOZ Activity Coordinator: University of Twente, Enschede, The Netherlands, September 2011-August In charge of the logistics of the activities organized by the association. Activist: University of Los Andes, Merida, Venezuela, Participated in a political movement of students during my university studies in Venezuela. My role consisted in the organization and logistics of pacific demonstrations. Participate in blogs discussing Venezuelan political situation.

2 Mechanical Design: Solid Works, AutoDesk Inventor, AutoCad, Working Model, Ansys, Mold Flow Computational Fluid Dynamics: PHOENICS Shareware. Simulation and Process Control: LabView, MathLab. Programming: Visual Basic, Java, C#. Spanish: Native speaker. Dutch: Almost native speaker with limited writing skills. English: Advanced speaking, reading and writing. Italian: High Intermediate reading, Intermediate writing and speaking. CIRP: Best paper award CIRP MS 2008 ULA-ORI: Travel grant for Italy Internship Merida State Legislature: Grant for Living Expenses for Italy Internship 2002 Universita degli Estudi di Cassino: Stipend for living expenses for Italy Internship 2002 Merida State Science Foundation (FUNDACITE): Grant for travel and expenses for I Latin American Mechanical Engineer Student Conference Scientific, Humanistic and Technological Development Council-ULA: diem for Congress Presentation Skills: 24 hours, Senter Novem, The Netherlands. English technical writing: 32 hours, University of Twente, The Netherlands. Management of Cultural relations: 24 hours, Senter Novem, The Netherlands. Programming in C#: 8 hours, University of Twente, The Netherlands. Basic Project Management: 16 hours, C.I.E.M., Mérida, Venezuela. Workshop on Maintenance Management: 16 hours, ULA. Mérida, Venezuela. Quality Standards ISO : 16 hours, University of Los Andes, Mérida, Venezuela. Geochemical Flux: 40 hours, INTEVEP, Mérida, Venezuela. Properties of Porous Media Flux: 16 hours, INTEVEP, Mérida, Venezuela. AutoCad 2000: 36 h hours, University of Los Andes, Mérida, Venezuela. Italian level 1: 60 hours. Università degli Studi di Cassino - Centro Rapporti Internazionali. Cassino, Italia. Italian intensive curse: 28 hours. Università degli Studi di Cassino - Centro Rapporti Internazionali. Cassino, Italia. Modern Harmony and improvisation in guitar: 3 Years, Prof. Johann N. Espinoza. Mérida,Venezuela.

3 Master courses Mechanical Engineering Manufacturing Facility Layout: Master in Production Management, Department of Design, Production and Management. Faculty of Industrial Design, University of Twente. Design of Production and Inventory Systems: Master in Production Management, Department of Design, Production and Management. Faculty of Industrial Design, University of Twente. CAD/CAM 3: Master degree, 2006, 2007, 2009, Department of Design, Production and Management. Faculty of Mechanical Engineering, University of Twente. Bachelor Courses Industrial Design Product Complexity: Bachelor degree Department of Design, Production and Management. Faculty of Industrial Design, University of Twente. Introduction to Finite Element Analysis for Industrial Designers: Bachelor degree Department of Design, Production and Management. Faculty of Industrial Design, University of Twente. Mechatronic Design: Bachelor degree, 2009, Department of Design, Production and Management. Faculty of Industrial Design, University of Twente. Bachelor Courses Mechanical Engineering Practicum Production Systems 2: Bachelor degree, Department of Design, Production and Management. Faculty of Industrial Design, University of Twente. Programming in Java practicum: Bachelor degree, 2006, 2007, Department of Design, Production and Management. Faculty of Industrial Design, University of Twente. Laser machining practicum: Bachelor degree, 2003, Department of Mechanical Automation. Faculty of Mechanical Engineering. University of Twente. Tutoring Master and Bachelor thesis: Tutored research in the fields of mechatronic design, computer aided synthesis, knowledge management in product development, production and management. Project F: Mechatronic design project in the bachelor degree of mechanical engineering, 2010, Department of Design, Production and Management. Faculty of Industrial Design, University of Twente. Project OMS: Mechatronic and Systems Engineering Project in the bachelor program of Industrial Design, 2009, 2010, Department of Design, Production and Management. Faculty of Industrial Design, University of Twente. Coordinated the valorization project: Assessing and identifying the scale of exploitation of Smart Synthesis Tools at the Dutch industry. Funded by IOP-IPCR Senter Novem. Amount October 2008 March Coordinated the research project: Focus and Connect, assessing the exploitability of SST in PHILIPS. The project was founded upon the program: Kenniswerkersregeling (KWR), Preparing for the Future organized by the Dutch government.

4 Internal reports [1] Jauregui-Becker, Juan Manuel. Management of Product Complexity: A knowledge Based Approach. University of Twente, Enschede, The Netherlands, (Course guide). [2] Jauregui Becker, Juan Manuel. From How Much To How Many: Complexity Management in Routine Design Automation. University of Twente. (PhD thesis) [3] Bonnema M., Jauregui-Becker J.M. Mechatronic Design: Tools, Theory and Practice. University of Twente, Enschede, The Netherlands, (Course guide) [4] Jauregui Becker, J.M. Implementation and testing of a control scheme for laser welding. Report no. wa1033, January, NIMR, Impact, EM. (Master thesis) [5] Jauregui-Becker J. M., Nava Rodríguez N. E., Parada Puig J. E.. Design of an anthropomorphic robotic hand with 3 fingers. University of Los Andes, Mérida, Venezuela, University of Cassino, Italy, (In Spanish)(Internships report) [6] Jauregui-Becker J.M., Rivera D. Mono-phase and non-compressive Flux in Porous Media. University of Los Andes, Mérida, (In Spanish) (Engineering thesis) Journal paper [1] Jauregui-Becker J.M., Tragter H., van Houten F.J.A.M. Toward a bottom-up approach to automate the design of cooling systems for injection molding. In: Computer-Aided Design & Applications, Volume 6, Issue 4, 2009, pages [2] Jauregui-Becker J.M., Tragter H., van Houten F.J.A.M. Structure and models of artifactual routine design problems for computational synthesis. In: CIRP Journal of Manufacturing Science and Technology, Volume 1, Issue 3, Design Synthesis, 2009, Pages [3] Jauregui-Becker J. M., Aalderink B. J., Aarts R. G. K. M., Olde Benneker J., and Meijer J.. Design, implementation and testing of a fuzzy control scheme for laser welding. In: Journal of Laser Applications, Volume 20, 2008, pages [4] Ceccarelli M., Nava Rodriguez N.E., Jauregui-Becker J.M., Parada Puig J.E. and Carbone G. Design and experimentation of an 1 DOF Anthropomorphic articulated finger for a robotic hand. In: Journal Metal Univers, Barcelona, Vol. 24, 2004, pages [5] Ceccarelli M., Nava Rodriguez N.E., Jauregui-Becker J.M., Parada Puig J.E. and Carbone G. Design and experimentation of an 1 DOF Anthropomorphic articulated finger for a robotic hand. In: Revista Iberoamericana de Ingeniería Mecánica, Volume 8, Issue 2, 2004, pages (In Spanish) Refereed Conference articles [1] Jauregui-Becker J.M., K.J.W. Gebauer, van Houten F.J.A.M. A new metamodel to represent topologic knowledge in artifactual design. In Proceedings of the International Conference on Engineering Design 2011, ICED 11, Copenhagen, [2] Jauregui-Becker J.M., Schotborch W.O., van Houten F.J.A.M. A Decomposition Algorithm for Parametric Design. In Proceedings of the International Conference on Engineering Design 2011, ICED 11, Copenhagen, [3] Jauregui-Becker, J.M., Wits W., Houten, FJAM. Van. Modeling the Structure and Complexity of Engineering Routine Design Problems. In: Proceedings of CIRP Design Conference 2011, Daejeon, [4] Wits W., Jauregui-Becker J.M., Riele, Te G.J., Developing an Integrated Design Strategy for Chip Layout Optimization. In: Proceedings of CIRP Design Conference 2011, Daejeon, 2011.

5 [5] Jauregui-Becker J.M., Tragter H., van Houten F.J.A.M. From how much to how many: a method to develop representations for computational synthesis. In: Proceedings of the International Conference on Engineering Design 2009, ICED 09, Stanford, [6] Olthof M., Jauregui-Becker J.M., Tragter H., van Houten F.J.A.M. Knowledge acquisition of routine design problems in industrial settings. In: Proceedings of the European Conference in Knowledge Management, ECKE 09, Vicenza, Italy, [7] Jauregui-Becker, J.M., Wits, W.W. and van Houten, F.J.A.M. Reducing design complexity of multidisciplinary domain integrated products: a case study. In M. Mitsuishi, K. Ueda, and F. Kimura, (Eds.), "Manufacturing Systems and Technologies for the New Frontier -- Proceedings for The 41st CIRP Conference on Manufacturing Systems," Springer, pp , Tokyo, 2008.(Best paper award) [8] Jauregui-Becker, J.M., Tragter, H., Houten, FJAM. Van. Structuring and modeling routine design problems for computational synthesis development. In: Proceedings of CIRP Design Seminar 2008, Enschede, [9] Jauregui-Becker J.M.,Tragter H., Kokkeler F.G.M., van Houten F.J.A.M. On the Parametric Definition of Design Problems for Computational Synthesis. In Proceedings of the International Conference on Engineering Design 2007, ICED 07, Paris, [10] Ceccarelli M., Jauregui-Becker J.M., Parada Puig J.E., Nava Rodriguez N.E., Lanni C., Carbone G. Experimental Activity for Designing a Hand with 1 Dof Anthropomorphic Fingers of Human Size. In: 12th Int. Workshop on Robotics in Alpe-Andria-Danube Region RAAD 2003, Cassino, 2003, paper 009RAAD03. [11] Ceccarelli M., Nava Rodriguez N.E., Jauregui Becker J.M., Parada Puig J.E. and Carbone G. Design and Experimentation of an 1 DOF Anthropomorphic Finger. In: VI Iberian-American Congress of Mechanical Engineers CIBEN6, Coimbra, pp , (In Spanish) [12] Nava Rodriguez N.E., Jauregui-Becker J.M., Parada Puig J.E. Design of a Force and Compression Measure Mechanism. In: I Latin American students congress of Mechanical Engineer,2001, Maracaibo, Venezuela. (In Spanish) [13] Nava Rodriguez N.E., Jauregui-Becker J.M., Parada Puig J.E. Kinematic Computerized Analysis of Mechanisms. In: I Latin American students congress of Mechanical Engineer, 2001, Maracaibo, Venezuela. (In Spanish) Poster Presentations [1] Jauregui-Becker J.M., Schotborch W.O., Wits W. Systematic Structuring of Design Knowledge. Second Workshop on Complex Systems Architecting, Enschede, The Netherlands, [2] Jauregui-Becker, J.M. From design processes to design strategies. Second Workshop on Complex Systems Architecting, Enschede, The Netherlands, [3] Jauregui-Becker, J.M. The Smart Synthesis Tools Project. IOP presentation day, Rotterdam, The Netherlands, [4] Jauregui-Becker, J.M. Structuring Design Problems. IOP presentation day, Bussum, The Netherlands, 2006.