Management Transmittal Operating Letter Data System (MODS)

Transcription

1 Management Transmittal Operating Letter Data System (MODS) Handbook M-32 March 2009 A. Explanation: This handbook provides operations policies and procedures governing the Management Operating Data System (MODS) program. B. Distribution: There is no initial distribution of this handbook. Offices may download this document from the Postal Service Intranet Postal Service PolicyNet website. C. Comments on Content: Address comments or questions regarding the content of this handbook to: MANAGER, PROCESSING OPERATIONS US POSTAL SERVICE 475 L ENFANT PLZ SW, RM 7631 WASHINGTON DC D. Effective Date: This handbook is effective March Tony Pajunas Vice President Network Operations

2

3 Contents 1 Introduction Purpose of Handbook MODS Program MODS Postal Service Network TACS WebEOR Enterprise Data Warehouse Customer Support Area MODS Coordinators Responsibilities Postal Service Headquarters Area Offices Field Offices/Facilities Finance MODS Program Functions of the MODS System MODS Basic Component Data Entry and Transmission Work Hour Data Volume Data WebEOR Manual Volume Entry MODS Reporting Periods MODS Day MODS Tour MODS Week MODS Month MODS Reports Volume Reporting MODS Operation Numbers First Handling Pieces WebEOR First Handling Piece Calculation WebEOR First Handling Piece Formula for Automation/Mechanization WebEOR FHP Formula for Manual FHP March 2009 iii

4 Management Operating Data System (MODS) Manual FHP Calculation Examples Manual-to-Manual Flow Distribution Manual FHP in Non-Automated Sites Mail Not Included in FHP or TPH Subsequent Handling Pieces and Total Piece Handling Automated/Mechanized TPH WebEOR SHP Manual SHP and TPH Total Pieces Fed Non-Add Total Pieces Handled Workload Measurement Operations Not in WebEOR Work Center Units Mixed Operations Workload Measurement MODS Credit Establishing Percentages Calculating Opening Unit Workload Volume Measurement and Identification Source Type Codes Transaction Codes Conversion Rates Work Hours Work Hour Reporting Base Default Operation Number Assignments Valid Operations by Finance Type Facility Local Units Clock Ring Procedures Standard Clock Rings Finance Number Transfer Clock Rings Manual Work Hour Entries Non-Transactor Reporting Manual Adjustments/Corrections to Clock Rings Specific Clocking Procedures Non-Exempt and Craft Employees Exempt Employees When Moving from One Operation to Another Stand-by Operations Definitions Applicability to Facilities Responsibility Use of Stand-by Operations Employees on Stand-by Operations iv Handbook M-32

5 Contents Stand-by Operation Numbers MODS Overtime TACS Authorizations Work Hours Computations TACS Work Hours Download MODS Tours Clock Ring Sequence Errors Missing Rings Report Default Hours Operations 999, 565, and TACS Ring Adjustments Invalid Employee Identification Number Adjustments Time and Attendance Inquiries Employees On-the-Clock Report Employee Moves Report Employee Everything Report WebMODS Reassign Work Hours Function MODS Reviews Objectives Review Requirements Review Procedures Ensure Proper Manual Worksheets Are Used for All Volume Recording Analyze and Verify Accuracy of Reports Analyze Productivity Reports Observe Productivity Trends Using Volume-Hours Report Review Manual Entries Report Ensure Proper Inventory Procedures Verify Proper Volume Reporting Procedures Verify Proper Procedures for Generating Local TPH Flow Configuration Verify Proper Procedures for Generating Local FHP Flow Configuration Verify Proper Procedures for Generating Manual FHP Flows in WebEOR Verify Correct Work Hour Reporting Procedures Check Work Operations Verify Adjustments Review Work Hours Reassignment and Interface Screen Verify Overtime Hours Review Report Submissions Initiate Corrective Action System Inputs and Computations Workloads General Policy Recording FHP Recording SHP March 2009 v

6 Management Operating Data System (MODS) Recording TPH Recording NA TPH Mechanized Operations Not in WebEOR Mechanized Operations in WebEOR Work Center Units Mixed Operations Recording Mail Volume Recording Distribution Operations Canceling Mail Recording Workload Units Recording Workload in Work Center Operations Work Center A Recording Presort Operations ( ) Work Center B Collection Mail Preparation ( , , 084, 089, 468) Work Center C Meter Preparation ( , 02B) Work Center D Opening Unit/Mail Separation ( , , , ) Work Center E Pouching ( ) Work Center F Flat Mail Preparation Operations (035, 140, 530) Flat Mail Preparation, Operation Flat Mail Preparation for Automatic Tray Handling System/Automatic Induct Machine, Operation Stand Alone Mail Preparation for Flats Sequencing System Stand Alone Mail Preparation, Operation Work Center G Dispatch Unit Operations ( ) Work Center H Platform Operations ( , , 225, ) Work Center I Manual Sortation Sack/Outsides (235, 348) Work Center J ACDCS, SWYB, AAA, ATS (118, ) National Conversion Rates Converting Feet into Pieces Converting Parcel Post Volume into Pieces Linear Rates Inventory Local TPH Flow Configuration/Mail Flow Requirements Updates Density Procedure Maintaining Accuracy Determining Mail Flow Density Projections Scheduling the Sampling Summarizing the Daily Samples Mail Flow Density Calculation Required/Valid Densities WebMODS Mail Flow Density Review Local FHP Flow Configuration Requirements vi Handbook M-32

7 Contents Updates Survey Procedures Requirements Survey Parameters for Letters Survey Parameters for Flats Maintaining Accuracy Determining Local FHP Flow Configuration Percentages Scheduling the Survey Summarizing the Daily Surveys FHP Flow Percentage Calculation WebEOR Manual FHP Flow Requirements Updates Survey Procedures Requirements Letters/Flats Calculations Calculating Manual FHP Percentage Example Maintaining Accuracy Determining Manual FHP Flow Percentages Scheduling the Survey Summarizing the Daily Surveys Manual FHP Flow Percentage Calculation Required/Valid Percentages WebMODS Version Overview WebMODS Administration Finance Number Configurations Local Operation/Local Unit Configuration Local TPH Flow Configuration Change Site Alias Default Data Entry Operations Default Volume Data Entered as Pieces Default Volume Data Entered as Feet Default Volume Data Entered as Pieces Inventory Default Volume Data Entered as Feet Inventory Manually Entering and Adjusting WebMODS Data Add Volume Data by Pieces Edit Volume Data by Pieces Inventory Volume Data by Pieces Add Volume Data by Feet Inventory Volume Data by Feet March 2009 vii

8 Management Operating Data System (MODS) 7-4 Reassigning Work Hours Importing Planned Data WebMODS Interfaces WebMODS Reports Generating WebMODS Reports Finance Number Grouping General Information Regarding Generate Reports Function Generate Reports Auto Mech Report Encode/Barcode Report LDC 17 Report Mail Processing Recap Report Management Summary Report Work Hours Key Automation Indicators Productivities Manual Work Hour Ratios Cancellations Operation by Composites Report Operation by LDC Report Operation with SPLY Report Operation with Plan Report Operation with SPLY, Plan Report Operation, Non-Add TPH Report Out of Bounds (Threshold 10% through 90%) Report Volume Hours Report Plan by Operation Report Local Operation Descriptions Report EOR Detail Report Date/Time EOR Detail Report Operation EOR Detail Report Unprocessed EOR FHP Report Flows FHP Distribution Report Flow Opening Unit Report Manual Entries MODS Date Report Manual Entries Entry Date Report Manual Entries Operation Report Manual Entries Inventory Report TACS Work Hours Date/Time Report TACS Work Hours Operation Report TACS Work Hours Unprocessed Report Work Hours Reassignment Log Report viii Handbook M-32

9 Contents General Information about Admin Reports Function Generate Administration Reports Area/District/Fin Nbr Listing Report Finance Listing by Name Report Finance Listing by Number Report Operation Listings , , , , Report Operation Listing, Non Add TPH Report Interface Exception Report Late Interface Report Transfer to EDW Log Report Transfer to EDW Rehome Log Report MIRS Transfer Log Report MIRS Rehome Transfer Log Report Generate WebMODS History Report Browse Volume Data General Information about the Browse Volume Data Function Browse Volume Data Tables EOR Mach Used Table EOR Raw Data Table Flow Volume Table Manual Audit Table Volume Work Hours Table Work Hours Table Work Hours Audit Table Browse Data General Information about the Browse Data Function Browse Data Reports Area Report District Report Finance Report Finance Type Report Flow National Report Local Operations Report Local TPH Flow Configurations Report Local TPH Flow Final Report Local FHP Flow Configurations Report Local FHP Flow Final Report LDC Report Location Info Report Manual Defaults Report MLRCP Report MODS Function Report National Operations Report March 2009 ix

10 Management Operating Data System (MODS) Operation Workgroup Report Operation Source Type Report Plan Operation Report Source Type Report Valid Fin Operations Report Using the Enterprise Data Warehouse Entering MODS Data Making Adjustments Retaining Reports WebEOR Accessing WebEOR WebEOR Mapping Site Information Mapping Adding and Deleting Sites Modifying Site Information Valid Operation Numbers SCF/ZIP Mapping FHP Flow Information Mapping WebEOR Collector Configuring the Collector Adding a Collector Modifying a Collector Deleting a Collector Viewing WebMODS Records Viewing Data in the Queue Viewing the WebMODS FHP Exports Report Viewing the WebMODS Detailed Transaction Report WebEOR Reports FHP Summary by Operation Report FHP Summary by Operation Local Unit Report x Handbook M-32

11 Contents Appendix A Operation Number Definitions Appendix B MODS Operation Numbers Appendix C Source Type Codes Appendix D Conversion Rates Appendix E MODS Review Appendix F Mail Flow Appendix G LDC 17 Workgroup Descriptions Appendix H Labor Distribution Code Descriptions Appendix I TACS Default Operation Numbers Appendix J PS Form Appendix K Abbreviations and Acronyms March 2009 xi

12 Management Operating Data System (MODS) This page intentionally left blank xii Handbook M-32

13 Exhibits Exhibits Exhibit WebMODS Interface Exhibit 3-2.2a FHP Formula Exhibit 3-2.2b Expanded FHP Formula Exhibit 3-2.3a Manual FHP Calculation Equation Exhibit 3-2.3b Percentage of Automation Letter TPH Flowing to Manual Operations Exhibit 3-2.3c Percentage of Automation/Mechanization Flats TPH Flowing to Manual Operations Exhibit 3-2.3d WebEOR Mapping FHP Flow Information Page Exhibit 3-2.4a Manual FHP Calculated from Outgoing TPH Exhibit 3-2.4b Manual FHP Calculated from Box Section TPH Exhibit 3-2.5a Manual-to-Manual Mailflow Exhibit Seven-Step Example of Calculating Manual FHP Percentage Exhibit 7-1 WebMODS Interface Exhibit 7-2.1a WebMODS Home Page Exhibit 7-2.1b Admin Main Page Exhibit 7-2.1c View Finance Number Configurations Page Exhibit 7-2.2a Local Oper/LU Configuration Page Exhibit 7-2.2b Add Local Operation Page Exhibit 7-2.2c Add Local Unit Page Exhibit 7-2.2d Local Oper/LU Configuration Page with Added Operation Number and Local Unit Exhibit 7-2.3a Local TPH Flow Configuration Page March 2009 xiii

14 Management Operating Data System (MODS) Exhibit 7-2.3b Add Local TPH Flow Configuration Percentage Page Exhibit Change Site Alias Page Exhibit a Default Data Entry Operations Page (Pieces Selected) Exhibit b Add Default Entry Operation Page (Pieces Selected) Exhibit a Default Data Entry Operations Page (Feet Selected) Exhibit b Add Default Data Entry Operation Page (Feet Selected) Exhibit a Default Data Entry Operations Page (Inventory Pieces Selected) Exhibit b Add Default Data Entry Operations Page (Inventory Pieces Selected) Exhibit a Default Data Entry Operations Page (Inventory Feet Selected) Exhibit b Add Default Data Entry Operations Page (Inventory Feet Selected) Exhibit 7-3.1a Data Entry Main Page Exhibit 7-3.1b Add Pieces Page Exhibit 7-3.1c Add Pieces w/defaults Page Exhibit Edit Pieces Page Exhibit 7-3.3a Inventory Pieces Page Exhibit 7-3.3b Inventory Pieces w/defaults Page Exhibit 7-3.4a Add Feet Page Exhibit 7-3.4b Operation Source Type Lookup by Feet Page (for Displayed Operation) Exhibit 7-3.4c Operation Source Type Lookup by Feet Page (for Entered Operation) Exhibit 7-3.4d Add Feet w/defaults Page Exhibit 7-3.5a Inventory Feet Page Exhibit 7-3.5b Inventory Feet w/defaults Page xiv Handbook M-32

15 Exhibits Exhibit 7-4 Work Hours Reassignment Page Exhibit 7-5a Imports Data Main Page Exhibit 7-5b Import Plan Data Page Exhibit 7-6 Interface Status Page Exhibit 8-1.1a WebMODS Home Page Exhibit 8-1.1b Reports Main Page Exhibit 8-1.1c Finance Number Grouping Page Exhibit 8-1.2a Generate Reports Page Exhibit 8-1.2b Lookup Finance Numbers Page Exhibit Sample Auto Mech Report Key Exhibit Sample EOR FHP Report Exhibit Sample Flows FHP Distribution Report Exhibit Sample Flow Opening Unit Report Exhibit Admin Reports Page Exhibit 8-1.6a Mod History Report Page Exhibit 8-1.6b Sample Mod History Report Exhibit Browse Volume Data Page Exhibit EOR Mach Used Table Exhibit EOR Raw Data Table Exhibit Flow Volume Table Exhibit Manual Audit Table Exhibit Volume Work Hours Table March 2009 xv

16 Management Operating Data System (MODS) Exhibit Work Hours Table Exhibit Browse Data Page Exhibit 9 WebEOR/WebMODS Configuration Exhibit 9-1a WebEOR Application Access Page Exhibit 9-1b WebEOR Network User Login Page Exhibit 9-1c WebEOR Main Menu Exhibit 9-1d Viewing Data from Other Parent Sites Exhibit 9-2 Mapping Menu Exhibit 9-2.1a Mapping Postal Facilities (Sites) Information Local Page Exhibit 9-2.1b Viewing All National Sites Exhibit 9-2.1c Viewing Specific Parent Sites Exhibit Mapping Postal Facilities (Sites) Information Modify Page Exhibit Mapping Valid Operation Number Page Exhibit 9-2.3a Mapping FHP SCF/ZIP Information Local Page Mapping FHP SCF/ZIP Information Local Fields and Buttons Exhibit 9-2.3b Viewing All Sites with FHP SCF/ZIP Information Exhibit 9-2.3c Viewing a Specific Parent Site with Its FHP SCF/ZIP Information Exhibit 9-2.4a Mapping FHP Flow Information Page Exhibit 9-2.4b Displaying FHP Flow Information Page for a Specific Parent Site Exhibit Admin Collector Information Page Exhibit Adding a Collector Exhibit Admin Collector Information Modify Page xvi Handbook M-32

17 Exhibits Exhibit 9-4 WebMODS Viewer Exhibit File WebMODS Viewer WebMODS Queue Page Exhibit File WebMODS Viewer WebMODS FHP Exports Page Exhibit File WebMODS Viewer WebMODS Detailed Transaction Report Page Exhibit C-1 Source Type Codes Exhibit E-1 MODS Review Worksheet March 2009 xvii

18 Management Operating Data System (MODS) This page intentionally left blank xviii Handbook M-32

19 Tables Tables Table Mail Levels Table a Example Mailflow Results Table TACS Function 1 Default Operation Numbers Table Operation Numbers for Stand-by Hours Table 4-6.2a MODS Tours Table 4-6.2b Tour Clock Ring Table MODS Hard Copy Report Retention Table LDC 17 Work Center Definitions Table Conversion Rates for Work Credit Equivalent Sacks Sacks per Container Table Converting Feet into Pieces Table 7-1 WebMODS System and Administration Reports Table 7-6a Traffic Light Colors for WebMODS Interface Source Data File Types Table 7-6b Interface Status Column Headings Table 7-6c Times When Data Is Uploaded Table 8-7 Report Retention Periods Table Postal Facilities (Sites) Fields and Buttons Table Postal Facilities (Sites) Information Modify Field and Button Descriptions Table Valid Operation Number Fields and Buttons Table March 2009 xix

20 Management Operating Data System (MODS) Table Mapping FHP Flow Information Page Fields and Buttons Table Collector Information Column Descriptions Table Admin Collector Information Add Page Fields and Buttons Table WebMODS Queue Fields and Buttons Table File WebMODS Viewer WebMODS FHP Export Page Fields and Buttons Table File WebMODS Viewer WebMODS Detailed Transaction Report Page Column Descriptions. 145 Table D-1 Priority Mail Container-to-Pieces Conversion Rate Table D-2 Flats Container-to-Pieces Conversion Rates Table D-3 Letter Container-to-Pieces Conversion Rates Table F-1 National Mail Flow Chart Table G-1 LDC17 Workgroups Table G-2 LDC17 Workgroup Operations Table G-3 LDC17 Workgroup Operations by Workgroup ID Table H-1 LDC Descriptions Table I-1 TACS Function 1 Default Operation Numbers Table K-1 Acronym List xx Handbook M-32

21 1 Introduction 1-1 Purpose of Handbook 1-2 MODS Program Handbook M-32 governs the Management Operating Data System (MODS) program. Operational data is reported by operation numbers (OPNs), which are assigned to all of the following: a. Mail volume. b. Work hours. c. Performance by operation (i.e., work activities). This handbook presents the program responsibilities for maintaining and operating MODS as follows: a. When to report data. b. The units of measurement used to convert mail volume. c. The naming conventions to use for data reporting. d. How to enter data into MODS. MODS is a national program. All United States Postal Service facilities in the system must follow the procedures in this handbook for volume, work hour reporting, and other data entry, except where otherwise specified. The MODS program has some flexibility and options to accommodate local needs. Any and all procedural variance(s) to this handbook must receive written approval by Postal Service Headquarters Operations Technical and Systems Integration Support (OTSIS) group. MODS is a systematic approach to gathering, storing, and reporting workload, work hours, and machine utilization. The operational data is entered into MODS, compiled, and communicated in reports to Postal Service facilities for planning mail processing activities and projecting work hours and mail volumes. Handbook M-32 is to be used as a management record-keeping system and is a tool for management to track work hours, volumes, and other information to maintain the efficiency of the Postal Service. Handbook M-32 is not relevant to craft jurisdiction. March

22 1-3 Management Operating Data System (MODS) 1-3 MODS Postal Service Network MODS data is compiled in the Web-based application Web Management Operating Data System (WebMODS). WebMODS collects data from two major Postal Service information systems, the Time and Attendance Collection System (TACS) and Web End of Run (WebEOR) TACS TACS is an automated program used in collecting time and attendance data. TACS stores and processes employee clock rings to generate work hour data that supports WebMODS work hours reporting. Work hours are summarized and transmitted automatically to WebMODS. The transmission usually occurs within 2 hours after the 7 a.m. MODS cutoff time WebEOR WebEOR is a Web-based application used in collecting operational data from automated and mechanized mail processing equipment (MPE). The application allows end users to retrieve, view, and store various end-of-run (EOR) statistics from automated and mechanized MPE. WebEOR s statistical data is sent to WebMODS Enterprise Data Warehouse WebMODS transmits data to the Enterprise Data Warehouse (EDW), which houses all MODS data. In EDW, data reports can be built by using the Network Operations Data Management 2 (NODM2) and Corporate Information System (CIS) project folders. Exhibit illustrates how WebMODS interfaces with other major Postal Service information systems. 2 Handbook M-32

23 Introduction 1-4 Exhibit WebMODS Interface 1-4 Customer Support The Customer Support branch in Eagan, MN, provides technical assistance to WebMODS, 24 hours a day, 7 days a week. For support, call USPS- HELP ( ). To open a help ticket, you need the following information: a. Site name. b. Your name. c. Your telephone number. d. Finance number. e. Description of the problem/error message. March

24 1-5 Management Operating Data System (MODS) To reference and track the problem, the Customer Support branch will assign your problem an open ticket number, which will remain open until the problem is resolved. To follow up, call Customer Support with the ticket number. 1-5 Area MODS Coordinators 1-6 Responsibilities Each area has a MODS coordinator who is responsible for the following: a. Ensuring MODS compliance. b. Providing program support to the field. c. Ensuring accurate data reporting. d. Maintaining data integrity. e. Conducting MODS reviews. f. Managing related MODS activities between Headquarters and the field offices. Subchapter 1-6 describes the roles and responsibilities for the MODS program for Postal Service Headquarters, area offices, field offices/facilities, and Finance Postal Service Headquarters Processing Operations is responsible for the following: a. Assigning a Headquarters program coordinator. b. Managing the overall operation of WebMODS. c. Assigning operation numbers to work activities. d. Approving changes or modifications to WebMODS. e. Overseeing the design and technical management of MODS/ WebMODS. f. Overseeing the development of the periodic updating of the national conversion rates. g. Providing support to the area coordinators. h. Managing EDW MODS report and data activities Area Offices In-Plant Support is responsible for the following: a. Assigning an area program coordinator. b. Coordinating program-related activities between Headquarters and the field offices. c. Providing detailed direction for accurately collecting MODS/ WebMODS data. 4 Handbook M-32

25 Introduction d. Overseeing the overall operation and technical management of MODS/ WebMODS within the area Field Offices/Facilities The plant/post Office is responsible for the following: a. Managing the overall operation of the local MODS/WebMODS. b. Assigning a local program coordinator. c. Complying with all procedures outlined in this handbook. d. Conducting MODS Reviews. e. Managing the local Total Piece Handling (TPH) Flow Configuration table, updating it semi-annually or when significant operational changes occur. f. Managing the local First Handling Piece (FHP) Flow Configuration table and updating the table annually or when significant operational changes occur for submission to headquarters. g. Reviewing WebMODS reports daily. h. Providing local MODS training as needed. i. Requiring data integrity as follows: (1) Accurate recording of volume in the proper operation number. (2) Accurate recording of clock rings/work hours in the proper operation number. (3) Correcting errors in a timely manner. (4) Accurate reporting/recording of mails during operational volume reviews and density analysis. (5) Preparing proper documentation and ensuring correction of data reporting errors Finance Finance is responsible for providing work hour data files for WebMODS. March

26 Management Operating Data System (MODS) This page intentionally left blank 6 Handbook M-32

27 2 MODS Program 2-1 Functions of the MODS System The Postal Service uses MODS to collect operational data, generate reports, and transmit local data files daily to the Corporate Data Acquisition Service (CDAS), which then feeds EDW in Raleigh, NC. EDW provides a historical database for rolling 3 years for national monthly reporting requirements. MODS stores the raw data and provides a historical database for national and local planning, analysis, and tracking of mail processing activities. WebMODS transmits to EDW at 15:00 CST daily, and those files are available at 21:00 for user reports. WebMODS performs the following functions: a. Assigns each activity a standard 3-digit operation number. A facility may further define operations with a local unit (LU) code, a 2-digit number added to the operation number. b. Uses source type codes combined with operation numbers to identify the origin, type designation, class, unit of measure, and other mail characteristics. c. Records mail volume by various methods to include the following: (1) Imports machine EOR data from WebEOR. (2) Manually inputs manual volumes into WebMODS by actual piece, feet, and/or container counts. d. Reports mail volume processed as FHP and projects manual subsequent handling pieces (SHP) using mail flow densities or actual pieces, except where noted. e. Records and reports actual work hours and authorized overtime by operation number. f. Provides optional planning of hours by labor distribution code and operation number. g. Provides optional planning of FHP volumes by letters, flats, and parcels. h. Reports workload units in nondistribution operations. March

28 2-2 Management Operating Data System (MODS) 2-2 MODS Basic Component MODS has one basic component, WebMODS. WebMODS is a Web-enabled application that provides a systematic approach to gathering, storing, and reporting data pertaining to workload, work hours, and MPE. The operational data is entered into WebMODS, compiled, and communicated in reports for planning and projecting work hours and mail volumes. Handbook M-32 governs MODS and the application WebMODS. 2-3 Data Entry and Transmission 2-4 Work Hour Data All facilities reporting MODS system statistical information have the data entered via WebEOR, TACS, or manual entry. The data is transmitted to the WebMODS application. 2-5 Volume Data The employee badge readers (EBR) record employees clock ring data used by several Postal Service systems. The primary data user is TACS, which uses employee clock ring data to compute work hour usage by operation number with the capability of optional tour reporting. TACS collects, stores, and transmits clock ring data for processing within WebMODS. WebMODS interfaces with TACS to import the local clock ring data to generate work hours for MODS reporting. WebMODS applies the work hours based on a MODS day, beginning at 07: WebEOR WebEOR is a Web-based software application running on a Windows 2003 server in Eagan. An EOR file is generated for each run processed on a piece of MPE and is sent to the National Directory Support System (NDSS) or a data collection server (DCS) at the conclusion of the run. WebEOR automatically looks for unprocessed data files at a regular interval, and when detected, automatically stores the data in the WebEOR database. WebEOR is configured to collect data from both the NDSS and the data collection server, depending on machine type. In addition to online viewing capabilities and standard reports, WebEOR provides the following to WebMODS: a. Supplies equipment statistical data files. b. Generates continuous files to report mail pieces fed and accepted by machine and time. 8 Handbook M-32