8086 Telephony Training Systems

Size: px
Start display at page:

Download "8086 Telephony Training Systems"

Transcription

1 8086 Telephony Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 01/2016

2 Table of Contents General Description 2 Topic Coverage 6 Features & Benefits 6 List of Available Training Systems 6 Additional Equipment Required to Perform the Exercises 6 Available Training Systems 7 Equipment Description 13 Optional Equipment Description 19 General Description The Telephony Training Systems are powerful learning tools that allow students to become familiar with the operation of modern telephone networks and digital private automatic branch exchanges (PABX). The training systems are also essential tools to introduce students to the Integrated Services Digital Network (ISDN). The Telephony Training Systems are built upon the Reconfigurable Training Module, This module, which uses state-of-the-art digital signal processor (DSP) technology, can be programmed to act as different parts of a telephone network. The courseware included with the training systems consists of a series of five student manuals, an instructor guide for each student manual, and a user guide. Interface cards that students install in the training module allow connection of real analog and digital telephone sets and trunk lines. A central office (CO) is easily implemented by inserting an analog line interface card into a training module programmed to act as a central office. Similarly, a digital PABX is implemented by inserting a digital telephone interface card into a training module programmed to act as a PABX. Furthermore, a simple telephone network can be set up quickly by adding analog and digital trunk interface cards to two COs and a PABX implemented with three training modules, and interconnecting the modules with trunk lines. Such a telephone network allows establishment of both intra- and inter-exchange calls as well as tandem-switched calls. A Pentium-type host computer (not included), connected to the Reconfigurable Training Module through a highspeed data link (Ethernet link with TCP/IP protocol), is required to run the Telephony Training System (LVTTS) software. This Windows -based software is used to download programs into the DSP memory of the Reconfigurable Training Module. The LVTTS software also has an intuitive user interface to: display the functional block diagram of the telephony equipment (CO, digital PABX, etc.) implemented in the Reconfigurable Training Module change various system settings and options, such as the telephone ringing cadence, companding type, subscriber names and phone s, etc. observe real signals throughout the system in both the time and frequency domains using modern virtual instruments; perform step-by-step observation of call routing sequences by recording all the events that occur during a call and then playing back these events insert faults in the system (password-protected feature) for troubleshooting purposes 2 Festo Didactic

3 Example of a simple telephone network. Part of the functional block diagram of a CO as observed in the LVTTS software. System settings and options are configured through windows in the LVTTS software. Festo Didactic 3

4 Real signals can be observed in both the time and frequency domains using virtual instruments included with the LVTTS software. The Call Processor Log in the LVTTS software allows all events that occur during a call to be recorded. These events can then be played back sequentially to display what happens in the system (CO or PABX) when a call is established and terminated. 4 Festo Didactic

5 Each student manual covers one particular subject and is divided into several units. Each unit consists of a series of hands-on exercises dealing with certain aspects of telephony. The exercises contain a clearly stated objective, a discussion, a summary of the exercise procedure, a detailed exercise procedure, a conclusion, and a set of review questions. A ten-question test at the end of each unit allows the instructor to verify the knowledge gained by the student. Each instructor guide provides the measured results as well as the answers to all questions of each exercise in the corresponding student manual. It also provides the answers to the unit test questions. The user guide provides all the information required to set up and use the Telephony Training System. Refer to the section of this datasheet titled Table of Contents of the Student Manuals for the topics covered in each student manual. The basic TTS, , contains all the equipment and courseware material required to cover the first two of the five fields of telephony mentioned above, that is, Analog Access to the Telephone Network and Central Office Operation. Other sets of equipment can be added to the basic TTS as required to cover the remaining fields mentioned above, that is, Digital PABX, PABX Analog Trunk, and Digital Trunk. Refer to the lists of equipment provided in this data sheet for additional information. The Telephony Training System is also an essential tool to introduce students to the Integrated Services Digital Network (ISDN). This is due to the fact that the digital PABX which can be setup with the TTS uses digital telephone sets of the ISDN type and ISDN basic rate interfaces. Furthermore, the digital trunk that can be set up to interconnect two CO's implemented with the TTS uses ISDN primary rate interfaces. Thus, while performing the courseware material for the digital PABX and the digital trunk, students are introduced to the following two major aspects of ISDN: the physical layer (layer 1) and the network layer (layer 3). Layer 1 defines the physical support and the nature of the electrical signals used in ISDN interfaces. Layer 3 defines the digital signaling protocol used in the ISDN to establish and release connections (telephone calls). A powerful data-logging instrument in the LVTTS software, referred to as the Call Processor Log, allows recording of all ISDN layer-3 messages that are exchanged between ISDN entities (call processor in a CO or PABX, digital telephone sets) during telephone calls. This enables student to easily observe the sequence of ISDN layer-3 messages that are used to establish a call, place a call on hold, initiate a conference call, terminate a call, etc. The Call Processor Log can also display the detailed contents of the ISDN layer-3 messages recorded, thereby allowing thorough investigation of the ISDN signaling protocol. The Call Processor Log in the LVTTS software can display ping-pong type diagrams that illustrate sequences of ISDN layer-3 messages exchanged during telephone calls. Festo Didactic 5

6 The Call Processor Log in the LVTTS software can display the detailed contents of the ISDN layer-3 messages recorded, down to the information element (IE) components. Topic Coverage Analog Access to the Telephone Network Central Office Operation Digital PABX PABX Analog Trunk Digital Trunk Features & Benefits Software simulation flexibility provides for real-life, stimulating exercicses DSP-based reconfigurable training system easily upgradable to emerging new standards and systems System can be configured for different international standards When configured as a digital PABX or when a digital trunk is set up, system allows study of the physical and network layers Powerful and innovative system for studying modern telephone networks Can be configured as a digital CO of the public switched telephone network (PSTN) or as a digital PABX Add-on packages allows for a comprehensive training system Comprehensive curriculum Fault-insertion capabaility for troubleshooting purposes Minimal hardware interfaces are required Enhanced flexibility through the elimination of front panel controls and diagrams Software allows display of diagrams, signal observation, settings changes, etc. Estimated total program (including all add-ons): 100 hours List of Available Training Systems 1 Telephony Training System - Analog Telephone Telephony Training System - Digital Telephone Add-On Telephony Training System - Analog Trunk Add-On Telephony Training System - Digital Trunk Add-On Additional Equipment Required to Perform the Exercises 6 Festo Didactic

7 1 1 Personal Computer Available Training Systems Telephony Training System - Analog Telephone The Telephony Training System (TTS) - Analog Telephone is a powerful learning tool that provides training in modern telephone networks and digital private automatic branch exchanges (PABX). It is also an essential tool to introduce students to the Integrated Services Digital Network (ISDN). The TTS is built upon state-of-the-art, programmable equipment that operates real world devices, including telephone sets and trunk lines. The TTS courseware covers the following fields of telephony: analog access to the telephone network, central office operation, digital PABX, PABX analog trunk, and digital trunk. Furthermore, while performing the courseware material for the digital PABX or the digital trunk, students are introduced to the following two major aspects of ISDN: the physical layer (layer 1) and the network layer (layer 3). The cornerstone of the TTS is the Reconfigurable Training Module, This module, which uses stateof-the-art digital signal processor (DSP) technology, can be programmed to act as different parts of a telephone network, such as a digital central office (CO) of the public switched telephone network (PSTN) or a digital PABX. Analog and digital interface cards, which the students install in the training module, allow connection of real analog and digital telephone sets and trunk lines. For example, a central office can be easily implemented by inserting an analog line interface card into a training module programmed to act as a central office. Similarly, a simple telephone network can be set up by inserting analog line and digital trunk interface cards into two training modules programmed to act as central offices, and by interconnecting the two modules via a trunk line. A Pentium-type host computer is connected to the training module through a high-speed data link (Ethernet link with TCP/IP protocol). The host computer is used to configure the training module as a digital CO or a digital PABX, using the included Lab-Volt Telephony Training System (LVTTS) software. This Windows -based software has an intuitive user interface that displays the functional block diagram of the telephony equipment (line interface, central office, digital PABX, etc.) implemented in the training module. The LVTTS software allows students to perform step-by-step observation of call routing sequences, and to observe real signals throughout the system in both the time and frequency domains using virtual equipment. A powerful data-logging instrument in the LVTTS software allows recording of all ISDN layer-3 messages that are exchanged between ISDN entities (call processor in a CO or PABX, digital telephone sets) during telephone calls. This enables students to achieve thorough investigation of the ISDN signaling protocol. The LVTTS software also allows various system parameters, such as the companding type, the of voice channels, the telephone ringing cadence, and the call progress tone frequencies and modulation intervals, to be easily changed to comply with the standards of a particular country or application. For troubleshooting purposes, the software also allows faults to be inserted in the system, using a password-protected function. List of Equipment 1 Refer to the Computer Requirements in the System Specifications section of this datasheet if the computer is to be provided by the end-user. Festo Didactic 7

8 1 Power Supply Reconfigurable Training Module (RTM) Dual Analog Line Interface Software and Accessories Analog Telephone Set List of Manuals Manual Description Analog Access to the Telephone Network (Student Manual) Analog Access to the Telephone Network (Instructor Guide) Telephony Training System (User Guide) E0 Central Office Operation (Student Manual) Central Office Operation (Instructor Guide) Table of Contents of the Manual(s) Analog Access to the Telephone Network (Student Manual) ( ) 1-0 The Telephone Set 1-1 Telephone Ringing 1-2 The Telephone Switchhook and Handset 1-3 Tone Dialing 1-4 Pulse Dialing 2-0 The Line Interface 2-1 Battery Feed Power Supply 2-2 Hybrid Function 2-3 Pulse Code Modulation 2-4 Companding 2-5 Time-Division Multiplexing 2-6 Subscriber Signaling Central Office Operation (Student Manual) ( ) 1-0 Signaling Circuit 1-1 Hook Status Demultiplexing and Storage 1-2 Dialed Number Detection 1-3 Call Progress Tone and Ringing Generation 2-0 Digital Switching 2-1 Time-Division Switching 2-2 Space-Division Switching 2-3 Two-Dimensional Switching 3-0 System Control 3-1 Call Processor Functions 3-2 Intra-Exchange Call Routing Sequence 3-3 Central Office Configuration 4-0 Supplementary Services 4-1 Caller Identification Additional Equipment Required to Perform the Exercises 8 Festo Didactic

9 1 2 Training on Analog Access to the Telephone Network, 0.8 day TF 1 3 Training on Central Office Operation, 0.9 day TF System Specifications Power Requirement Current Central Office (CO) Switching Type Switching Voice Channels Dialing Modes Calling Party Identification Private Automatic Branch Exchange (PABX) Switching Type Switching Voice Channels 3.5 A Time-Space-Time (TST), digital Selectable, 24 (1.544 Mb/s) and 30 (2.048 Mb/s) Dual-Tone Multi-Frequency (DTMF), pulse Multiple Data Message Format (MDMF) Bellcore Caller ID Time-Space-Time (TST), digital 30 (2.048 Mb/s) Signaling Protocol Basic National ISDN 1 Intended Location On a table able to support the weight of the equipment 215 x 750 x 600 mm (8.4 x 29.5 x 23.6 in) TBE Telephony Training System - Digital Telephone Add-On List of Equipment The Telephony Training System - Digital Telephone Add-On is a PABX add-on to the Telephony Training System, It adds a digital telephone, as well as the required interface, to the training system. 1 Digital Telephone Interface Digital Telephone Set Training at Festo Canada (Quebec). For training at your site, extra travel fees will apply. Please contact for an estimate of these fees. 3 Training at Festo Canada (Quebec). For training at your site, extra travel fees will apply. Please contact for an estimate of these fees. Festo Didactic 9

10 List of Manuals Manual Description Private Automatic Branch Exchange (PABX) (Student Manual) Private Automatic Branch Exchange (PABX) (Instructor Guide) Table of Contents of the Manual(s) Private Automatic Branch Exchange (PABX) (Student Manual) ( ) 1-0 Architecture and Basic Operation 1-1 Architecture of a Digital PABX 1-2 Telephone Set Portability 1-3 Internal Call Establishment Procedure 1-4 Call Progress Indication 2-0 Call Functions 2-1 Call Holding and Multiple Call Control 2-2 Call Transfer 2-3 Conference Calling 2-4 Intercom Additional Equipment Required to Perform the Exercises 1 4 Training on Private Automatic Branch Exchange (PABX), 0.6 day TF System Specifications Intended Location The Digital Telephone Interface is designed to be installed in the Reconfigurable Training Module of , while the Digital Telephone Set can be installed just like a standard telephone. 90 x 700 x 230 mm (3.5 x 27.6 x 9.1 in) TBE 4 Training at Festo Canada (Quebec). For training at your site, extra travel fees will apply. Please contact for an estimate of these fees. 10 Festo Didactic

11 Telephony Training System - Analog Trunk Add-On The Telephony Training System - Analog Trunk Add-On is a PABX add-on to the Telephony Training System, It consists of a PABX Analog Trunk Interface that can be installed in the Reconfigurable Training Module. List of Equipment 1 PABX Analog Trunk Interface List of Manuals Manual Description PABX Analog Trunk (Student Manual) PABX Analog Trunk (Instructor Guide) Table of Contents of the Manual(s) PABX Analog Trunk (Student Manual) ( ) 1-0 PABX Analog Trunk 1-1 Familiarization with the PABX Analog Trunk 1-2 Analog Trunk Interface 2-0 Call Routing Over a PABX Analog Trunk 2-1 External Call Answering and Termination 2-2 External Call Establishment (Overlap Sending Method) 2-3 External Call Establishment (En-Bloc Sending Method) 3-0 PABX Configuration 3-1 Configuring the PABX Additional Equipment Required to Perform the Exercises 2 5 Reconfigurable Training Module (RTM) Dual Analog Line Interface Digital Telephone Interface Training on PABX Analog Trunk, 0.6 day TF 5 Note that 2 RTM (9431), 1 Dual Analog Line Interface (9475) and 1 Digital Telephone Interface (9476) are required to perform the exercises. 6 Training at Festo Canada (Quebec). For training at your site, extra travel fees will apply. Please contact for an estimate of these fees. Festo Didactic 11

12 System Specifications Intended Location The PABX Analog Trunk Interface is designed to be installed in the Reconfigurable Training Module of TBE TBE Telephony Training System - Digital Trunk Add-On The Telephony Training System - Digital Trunk Add-On is an add-on to the Telephony Training System, It consists of a Digital Trunk Interface that can be installed in the Reconfigurable Training Module. List of Equipment 1 Digital Trunk Interface List of Manuals Manual Description Digital Trunk (Student Manual) Digital Trunk (Instructor Guide) Table of Contents of the Manual(s) Digital Trunk (Student Manual) ( ) 1 Multiplexing Format and Basic Operation 1-1 Familiarization with the Digital Trunk 1-2 Digital Trunk Interface 1-3 Alarm Indication 2 Inter-Exchange Signaling 2-1 Outgoing Inter-Exchange Call Routing Sequence 2-2 Incoming Inter-Exchange Call Routing Sequence 2-3 Multiple Inter-Exchange Call Control Additional Equipment Required to Perform the Exercises 2 7 Reconfigurable Training Module (RTM) Dual Analog Line Interface Digital Trunk Interface Note that 2 RTM (9431), 2 Dual Analog Line Interfaces (9475) and an additional Digital Trunk Interface (9478) are required to perform the exercises. 12 Festo Didactic

13 1 8 Training on Digital Trunk, 0.5 day TF System Specifications Intended Location The Digital Trunk Interface is designed to be installed in the Reconfigurable Training Module of TBE TBE Equipment Description Power Supply The Power Supply is used to power electrical equipment in various radar and communications training systems. A flexible, five-wire power cord, terminated with a five-prong, twistlock plug and line cap, supplies power to the module. A mechanical interlock on the line cap prevents the removal of an energized Power Supply from its locked position in the workstation. The Power Supply requires a three-phase, wye-connected, five-wire service installation. An appropriate wall outlet is supplied with each Power Supply so that the local ac power network can be properly terminated to receive the power cord. In addition to the three-phase legs and the neutral, a separate copper ground provides proper grounding for the Power Supply chassis and workstation cabinets, thus ensuring added safety for students using the equipment. The Power Supply consists of fixed and variable dc and ac voltage sources, all terminated with 4 mm safety banana jacks. These sources can be used simultaneously, up to a total load current equal to the rating of the fixed three-phase output. Independent circuit breakers, reset from the front panel, protect the Power Supply input and outputs. Indicator lamps monitor the presence of input voltage in each phase. When a phase leg of the local ac power network is out, the lamp goes off to reflect this condition. A voltmeter, connected through a selector switch, monitors the outputs. Specifications Power Requirement Current Service Installation Rating of DC Power Outputs (2) 3.5 A Standard single-phase ac outlet 8 Training at Festo Canada (Quebec). For training at your site, extra travel fees will apply. Please contact for an estimate of these fees. Festo Didactic 13

14 +5 V 8 A / output +3.3 V 7 A / output +12 V - A 5 A / output +12 V - B 3 A / output -12 V 0.75 A (both outputs) -5 V 0.5 A (both outputs) AC Power Outlet Rating 120 V, 0.3 A, 50/60 Hz 165 x 250 x 250 mm (6.5 x 9.8 x 9.8 in) 5.6 kg (12.2 lb) Reconfigurable Training Module (RTM) The Reconfigurable Training Module (RTM) consists mainly of a powerful digital signal processor (DSP), with three slots on the module front panel for installing interface modules. An Ethernet port (RJ-45) connector, located on the back panel, allows connection of the RTM to the host computer. The functionality of the training system is determined by downloading a program into the DSP memory using the host computer that runs the software. Electrical power is supplied to the RTM by the Power Supply, 9408, through a multipin cable that connects to the back panel. Specifications Interface Card Slots Analog/Digital 2 Digital 1 Analog Inputs (4) Voltage Range Impedance Analog Outputs (4) Voltage Range Impedance A and B Auxiliary Outputs Voltage Range Impedance C and D Auxiliary Outputs Voltage Range Impedance Data Link to Host Computer ±10 V 600 Ω ±10 V 600 Ω ±10 V 600 Ω ±3.0 V 8 Ω 10 Mb/s (Ethernet) or 100 Mb/s (Fast Ethernet), TCP/IP Protocol 14 Festo Didactic

15 215 x 430 x 280 mm (8.5 x 16.9 x 11.0 in) 9.8 kg (21.6 lb) Dual Analog Line Interface The Dual Analog Line Interface is a compact module (also referred to as a card) designed to be installed into one of the three slots on a Reconfigurable Training Module that has been programmed to act as a digital CO. It contains two standard line interfaces providing conventional telephone sets ( 9485) with an analog access to the CO implemented with the Reconfigurable Training Module. Two standard (RJ-11) telephone line connectors mounted on the front panel allow connection of analog telephone sets or PABX analog trunk lines to the Dual Analog Line Interface. Test points are also available on the front panel to observe the signals on each analog line using conventional test equipment. DC power is automatically supplied to the Dual Analog Line Interface when it is installed into a Reconfigurable Training Module. Specifications Voice Digitization Sampling Rate 8 khz Companding/Expanding Selectable, None, μ-law (255), and A-Law (87.6) Resolution Bandwidth Ring Generator Maximum Load Output Voltage Frequency Interface A Line Resistance Interface B Line Resistance 8 bits 3.4 khz 4 86 V Selectable, 45 V, 75 V, and 86 V Selectable, 16.7 Hz, 20 Hz, 25 Hz, and 50 Hz Selectable, 600 Ω, 625 Ω, 650 Ω, 675 Ω, 875 Ω, 900 Ω, 950 Ω, 1.0 kω, 1.5 kω, 1.7 kω, 1.8 kω, 2.0 kω, 6.7 kω, 10 kω, and 20 kω 600 Ω 114 x 110 x 209 mm (4.5 x 4.3 x 8.2 in) 0.6 kg (1.4 lb) Festo Didactic 15

16 Digital Telephone Interface The Digital Telephone Interface is a compact module (also referred to as a card) designed to be installed into one of the three slots on a Reconfigurable Training Module that has been programmed to act as a digital PABX. It can interface four digital telephone sets ( 9486) with the PABX implemented with the Reconfigurable Training Module. Four RJ-45 connectors mounted on the front panel allow connection of up to four digital telephone sets to the Digital Telephone Interface. Test points are also available on the front panel to observe the digital signals exchanged by a digital telephone set and the PABX. DC power is automatically supplied to the Digital Telephone Interface when it is installed into a Reconfigurable Training Module. Specifications Digital Phones Supported 4 Type ISDN-BRI (2) PABX Analog Trunk Interface x 110 x 209 mm (4.5 x 4.3 x 8.2 in) 0.6 kg (1.3 lb) The PABX Analog Trunk Interface is a compact module (also referred to as a card) designed to be installed into one of the three slots on a Reconfigurable Training Module that has been programmed to act as a digital PABX. It contains the electronic circuitry required to connect the PABX implemented with the Reconfigurable Training Module to a CO implemented with another Reconfigurable Training Module, through an analog trunk line. A standard (RJ-11) telephone line connector mounted on the front panel allows connection to the analog trunk line (included with the module). Test points are also available on the front panel to observe the signals on the PABX analog trunk line. DC power is automatically supplied to the PABX Analog Trunk Interface when it is installed into a Reconfigurable Training Module. Specifications 16 Festo Didactic

17 Trunk Lines Supported Number of Voice Channels 1 Digital Trunk Interface (full duplex) 114 x 110 x 209 mm (4.5 x 4.3 x 8.2 in) 0.5 kg (1.2 lb) The Digital Trunk Interface is a compact module (also referred to as a card) designed to be installed into one of the three slots on a Reconfigurable Training Module that has been programmed to act as a digital CO. It allows connection of the CO implemented with the Reconfigurable Training Module to a CO implemented with another Reconfigurable Training Module, via a digital trunk line (included with the module) operating at the DS1 or E1 time-division multiplexing format. An RJ-48 connector mounted on the front panel allows connection to the digital trunk line. Test points are also available on the front panel to observe the digital signals exchanged through the digital trunk line. DC power is automatically supplied to the Digital Trunk Interface when it is installed into a Reconfigurable Training Module. Specifications Trunk Lines Supported Number of Voice Channels 1 (full duplex) Selectable, 24 (1.544 Mb/s) and 30 (2.048 Mb/s) Time-Division Multiplexing Format Selectable, DS1 (24 voice channels) and E1 (30 voice channels) Software and Accessories x 110 x 209 mm (4.5 x 4.3 x 8.2 in) 0.5 kg (1.2 lb) The Software and Accessories set contains the software, as well as all cables and accessories, required for system operation. It mainly consists of the LVTTS software, interconnection cables, an Ethernet adapter (network card) to be installed in the host computer (if none is available), and a pair of speakers. Festo Didactic 17

18 Analog Telephone Set The Analog Telephone Set is a conventional telephone unit with the following additional features: speaker phone, LCD display, caller identification function, multiple phone memory, and one-touch call buttons. A switch allows selection between tone dialing and pulse dialing. The telephone ringer can be turned off through another switch. The unit requires AC power (available on the Power Supply, 9408) for the LCD display, caller identification function, and memory to be operative. The Analog Telephone Set is provided with an RJ-11 connector cable that allows connection to a Dual Analog Line Interface, Specifications Power Supply Auxiliary Power Supply Calling Party Identification Ringer Equivalence Number (REN) 0.7 B Digital Telephone Set V dc (from telephone line) 6 V dc, 50 ma (from ac powered adaptor) Bellcore Caller ID 90 x 170 x 250 mm (3.5 x 6.7 x 9.8 in) 1.1 kg (2.4 lb) The Digital Telephone Set is a voiceonly ISDN-type telephone provided with the following features: basic ISDN functions, programmable call appearance/function buttons, tiltable LCD display, and semi-duplex speaker. Specifications Power Supply -48 V dc (from telephone line) Protocols National ISDN 1 and 2 18 Festo Didactic

19 90 x 300 x 230 mm (3.5 x 11.8 x 9.1 in) 1.2 kg (2.6 lb) Optional Equipment Description Personal Computer (Optional) The Personal Computer consists of a desktop computer running under Windows 7. A monitor, keyboard, and mouse are included. Specifications Power Requirements Current Service Installation 2 A Standard single-phase ac outlet Festo Didactic 19

20 Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc All rights reserved. Festo Didactic SE Rechbergstrasse Denkendorf Germany P. +49(0)711/ F. +49(0)711/ Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ United States P F Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P F Festo Didactic

Analog Access to the Telephone Network

Analog Access to the Telephone Network Telecommunications Telephony Analog Access to the Telephone Network Courseware Sample 32964-F0 Order no.: 32964-00 First Edition Revision level: 01/2015 By the staff of Festo Didactic Festo Didactic Ltée/Ltd,

More information

Variable-Frequency Drive Training System

Variable-Frequency Drive Training System 3356-00 Variable-Frequency Drive Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 09/2016 Table of Contents General Description 2 Components 3 Carrying Case 4 Courseware 4 Topic

More information

3468-00 Lighting and Fire Alarm Training System Add-On

3468-00 Lighting and Fire Alarm Training System Add-On 3468-00 Lighting and Fire Alarm Training System Add-On LabVolt Series Datasheet Festo Didactic en 06/2016 Table of Contents General Description 2 List of Equipment 2 List of Manuals 2 Additional Equipment

More information

3466 Building Energy Management Training Systems

3466 Building Energy Management Training Systems 3466 Building Energy Management Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 06/2015 Table of Contents General Description 3 Courseware 3 Topic Coverage 4 List of Available

More information

46120-F0 Solar Energy Training System

46120-F0 Solar Energy Training System 46120-F0 Solar Energy Training System LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 06/2016 Table of Contents General Description 2 List of Equipment 2 List of Manuals 3 Table of Contents of

More information

Telephony Systems Trainer CODITEL

Telephony Systems Trainer CODITEL Technical Teaching Equipment Telephony Systems Trainer CODITEL Always included in the supply: Teaching Technique used EDIBON Computer Control System 2 Computer Control Software Computer (not included in

More information

Traditional Telephony

Traditional Telephony Traditional Telephony Basic Components of a Telephony Network This topic introduces the components of traditional telephony networks. Basic Components of a Telephony Network 3 A number of components must

More information

21016 elearning Courses

21016 elearning Courses 21016 elearning Courses LabVolt Series Datasheet Festo Didactic en 03/2015 Table of Contents General Description 3 List of Available Training Systems 4 Equipment Description 5 2 Festo Didactic General

More information

AI-80 CALLER ID SIGNAL GENERATOR. Key Features. Applications. Generates both On Hook and Off Hook (Type I/II) Caller ID signals

AI-80 CALLER ID SIGNAL GENERATOR. Key Features. Applications. Generates both On Hook and Off Hook (Type I/II) Caller ID signals CALLER ID SIGNAL GENERATOR Key Features Generates both On Hook and Off Hook (Type I/II) Caller ID signals Supports both FSK and DTMF Signalling Methods Supports all Caller ID Standards such as Bellcore,

More information

Telecommunications Switching Systems (TC-485) PRACTICAL WORKBOOK FOR ACADEMIC SESSION 2011 TELECOMMUNICATIONS SWITCHING SYSTEMS (TC-485) FOR BE (TC)

Telecommunications Switching Systems (TC-485) PRACTICAL WORKBOOK FOR ACADEMIC SESSION 2011 TELECOMMUNICATIONS SWITCHING SYSTEMS (TC-485) FOR BE (TC) PRACTICAL WORKBOOK FOR ACADEMIC SESSION 2011 TELECOMMUNICATIONS SWITCHING SYSTEMS (TC-485) FOR BE (TC) Department of Electronic Engineering NED University of Engineering and Technology, Karachi LABORATORY

More information

8022-0E Motor Winding Kit

8022-0E Motor Winding Kit 8022-0E Motor Winding Kit LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 06/2016 Table of Contents General Description 2 Optional Equipment Required to Operate the Rotating Machines 3 Features

More information

Information. Siemens Enterprise Communications www.siemens-enterprise.com

Information. Siemens Enterprise Communications www.siemens-enterprise.com Information HiPath 500 V9 The Professional Communications System for Small Businesses and Offices HiPath 500, the classic phone system, is based on reliable ISDN technology and delivers the highest possible

More information

Product Overview. Features CHAPTER

Product Overview. Features CHAPTER CHAPTER 1 This chapter describes the Cisco IAD1101 integrated access device chassis, and the line interface modules supported by the Cisco IAD1101. This chapter includes the following sections: Features

More information

FURTHER READING: As a preview for further reading, the following reference has been provided from the pages of the book below:

FURTHER READING: As a preview for further reading, the following reference has been provided from the pages of the book below: FURTHER READING: As a preview for further reading, the following reference has been provided from the pages of the book below: Title: Signaling System #7 Second Edition Author: Travis Russell Publisher:

More information

APPENDIX A GENERAL DEFINITIONS & SERVICE FUNCTIONS

APPENDIX A GENERAL DEFINITIONS & SERVICE FUNCTIONS APPENDIX A GENERAL DEFINITIONS & SERVICE FUNCTIONS This Appendix provides the basic definitions and service functions of local communications services under the scope of this contract. The Government requires

More information

-Helping to make your life betterwww.person-to-person.net

-Helping to make your life betterwww.person-to-person.net Household Telephone Management System Built on Interceptor ID Technology Owner/Operation Manual Telephone Management System- Model P2P101 Call Receiver - Model P2P301 (Receiver may be sold separately)

More information

Alcatel-Lucent OmniPCX Enterprise Communication Server TA-MMK (MMK V2)

Alcatel-Lucent OmniPCX Enterprise Communication Server TA-MMK (MMK V2) Alcatel-Lucent OmniPCX Enterprise Communication Server TA-MMK (MMK V2) Legal notice: Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are

More information

GSM Desktop phone DPH101. User manual v1.00

GSM Desktop phone DPH101. User manual v1.00 GSM Desktop phone DPH101 User manual v1.00 LEGAL NOTICE Copyright 2011 TELTONIKA Ltd. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document

More information

1. OVERVIEW...4. 1.1 SPECIFICATIONS...4 1.2 HARDWARE OVERVIEW...6 1.2.1 Front Panel and LED Indication...6 1.2.2 Back Panel...7

1. OVERVIEW...4. 1.1 SPECIFICATIONS...4 1.2 HARDWARE OVERVIEW...6 1.2.1 Front Panel and LED Indication...6 1.2.2 Back Panel...7 epbx-100 User s Manual V.1.1 1. OVERVIEW...4 1.1 SPECIFICATIONS...4 1.2 HARDWARE OVERVIEW...6 1.2.1 Front Panel and LED Indication...6 1.2.2 Back Panel...7 2. START TO CONFIGURE EPBX-100...8 2.1 STEP 1...8

More information

SIP Proxy Server. Administrator Installation and Configuration Guide. V2.31b. 09SIPXM.SY2.31b.EN3

SIP Proxy Server. Administrator Installation and Configuration Guide. V2.31b. 09SIPXM.SY2.31b.EN3 SIP Proxy Server Administrator Installation and Configuration Guide V2.31b 09SIPXM.SY2.31b.EN3 DSG, DSG logo, InterPBX, InterServer, Blaze Series, VG5000, VG7000, IP590, IP580, IP500, IP510, InterConsole,

More information

Setting Up the Cisco Unified IP Phone

Setting Up the Cisco Unified IP Phone CHAPTER 3 This chapter includes the following topics, which help you install the Cisco Unified IP Phone on an IP telephony network: Before You Begin, page 3-1 Understanding the Cisco Unified IP Phone 7962G

More information

emta (VoIP over Cable Modem)

emta (VoIP over Cable Modem) emta (VoIP over Cable Modem) User Manual Version 1.0 Important Rules for Safe Operation Safe Use of Equipment Read all the instructions before operating this equipment with particular emphasis to safety

More information

VCL-PRI ISDN VALIANT COMMUNICATIONS LIMITED. Primary Rate (Euro-ISDN) Multiplexer. Product Brochure & Data Sheet

VCL-PRI ISDN VALIANT COMMUNICATIONS LIMITED. Primary Rate (Euro-ISDN) Multiplexer. Product Brochure & Data Sheet VALIANT COMMUNICATIONS LIMITED VCL-PRI ISDN Primary Rate (Euro-ISDN) Multiplexer Product Brochure & Data Sheet 1 INDEX S.No. Particulars Pg. No. 1. Product Overview - VCL-PRI ISDN (Euro ISDN Multiplexer)

More information

Application Note: Extending a TSP s Analog Capabilities Using an Access Bank I

Application Note: Extending a TSP s Analog Capabilities Using an Access Bank I 22116 23 rd Drive SE Bothell, WA 98021-4413, USA Toll free 800-426-3926 425-487-1515 Fax 425-487-2288 E-mail info@teltone.com www.teltone.com Application Note: Extending a s Analog Capabilities Using an

More information

PATTON TECH NOTES What are FXS and FXO?

PATTON TECH NOTES What are FXS and FXO? Introduction The question What is the difference between FXS and FXO? is frequently asked by those deploying Patton Voice-over-Internet Protocol (VoIP) SmartNode solutions. Foreign exchange Subscriber

More information

Cisco Analog Telephone Adaptor Overview

Cisco Analog Telephone Adaptor Overview CHAPTER 1 This section describes the hardware and software features of the Cisco Analog Telephone Adaptor (Cisco ATA) and includes a brief overview of the Skinny Client Control Protocol (SCCP). The Cisco

More information

Business Telephone Systems

Business Telephone Systems Business Telephone Systems NEW PBX SYSTEMS Panasonic's new KX-TDA30/100/00 Hybrid IP PBX is a family of networkoriented products. They are designed to support IP telephony, first- and thirdparty computer

More information

CISCO SPA3102 PHONE ADAPTER WITH ROUTER

CISCO SPA3102 PHONE ADAPTER WITH ROUTER CISCO SMALL BUSINESS VOICE GATEWAYS AND ATAS Intelligent Call-Routing Gateway for VoIP HIGHLIGHTS Enables high-quality, feature-rich voice-over-ip service through your broadband Internet connection Two

More information

SIMATIC S7-1200. It s the Interplay that makes the difference. Siemens AG 2010. All Rights Reserved.

SIMATIC S7-1200. It s the Interplay that makes the difference. Siemens AG 2010. All Rights Reserved. SIMATIC S7-1200 It s the Interplay that makes the difference SIMATIC S7-1200 Controller SIMATIC S7-1200 CPUs CPU 1211C 3 configurations per CPU Dimensions W x H x D (mm) CPU 1212C CPU 1214C DC/DC/DC, AC/DC/RLY,

More information

NXU RoIP Link to Eliminate Voice-Grade Leased Line

NXU RoIP Link to Eliminate Voice-Grade Leased Line NXU RoIP Link to Eliminate Voice-Grade Leased Line Purpose This Application Note will describe a method at which Network Extension Units (NXUs) can be utilized on an existing digital network to eliminate

More information

Daker DK 1, 2, 3 kva. Manuel d installation Installation manual. Part. LE05334AC-07/13-01 GF

Daker DK 1, 2, 3 kva. Manuel d installation Installation manual. Part. LE05334AC-07/13-01 GF Daker DK 1, 2, 3 kva Manuel d installation Installation manual Part. LE05334AC-07/13-01 GF Daker DK 1, 2, 3 kva Index 1 Introduction 24 2 Conditions of use 24 3 LCD Panel 25 4 Installation 28 5 UPS communicator

More information

FAST TUTORIALS FOR TIME-CHALLENGED TECHNICIANS

FAST TUTORIALS FOR TIME-CHALLENGED TECHNICIANS Tech Notes from a Telephone Engineer FAST TUTORIALS FOR TIME-CHALLENGED TECHNICIANS POTS Dialtone Description: POTS Plain Old Telephone Service Long held industry acronym for standard dialtone service

More information

OM2260VW2 USER MANUAL VERIZON WIRELESS HOME PHONE CONNECT

OM2260VW2 USER MANUAL VERIZON WIRELESS HOME PHONE CONNECT OM2260VW2 USER MANUAL VERIZON WIRELESS HOME PHONE CONNECT Welcome to Verizon Wireless Thank you for choosing Verizon Wireless Home Phone Connect. You re now connected to the power of America s most reliable

More information

Chapter 8: The Telephone System

Chapter 8: The Telephone System Chapter 8: The Telephone System MULTIPLE CHOICE 1. DTMF stands for: a. Digital Telephony Multiple Frequency c. Dual-Tone Multifrequency b. Dial Tone Master Frequency d. Digital Trunk Master Frequency 2.

More information

Personal Assistance System Owner's Guide

Personal Assistance System Owner's Guide Owner's Guide PSC07 READ THIS FIRST This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturers instructions,

More information

Information. Communication for the open minded. Siemens Enterprise Communications www.siemens-enterprise.com/open

Information. Communication for the open minded. Siemens Enterprise Communications www.siemens-enterprise.com/open Information HiPath 500 V8 The Professional Communications System for Small Businesses and Offices HiPath 500, the classic phone system, is based on reliable ISDN technology and delivers the highest levels

More information

Comprehensive Modular Genset Controller

Comprehensive Modular Genset Controller Inteligen Click Here To Learn More Comprehensive Modular Genset Controller Brief Description The Inteligen is a comprehensive controller for single and multiple generating sets operating in standby or

More information

TELEPHONE AND LINE ANALYZER

TELEPHONE AND LINE ANALYZER The TALAN represents state-of-the-art capability to rapidly and reliably detect and locate illicit tampering and security vulnerabilities on both digital and analog telephone systems. Marketing Characteristics

More information

Configuring the 930A for Common PBX Metallic Signaling Interfaces

Configuring the 930A for Common PBX Metallic Signaling Interfaces Product: 930A Communications Test Set APPLICATION NOTE # Configuring the 930A for Common PBX Metallic Signaling Interfaces TABLE OF CONTENTS Introduction...1 Primer...1 LOOP START...2 General...2 Trunk

More information

DSP7000 Series High-Speed Programmable Dynamometer Controllers

DSP7000 Series High-Speed Programmable Dynamometer Controllers Data Sheet Series High- Programmable Controllers DSP7001 - single channel - dual channel Features DSP7001 Single Channel: Low cost and easy to use Dual Channel: Enables the support of two testing instruments

More information

Getting Started KX-TDA5480

Getting Started KX-TDA5480 4-Channel VoIP Gateway Card Getting Started KX-TDA5480 Model KX-TDA0484 Thank you for purchasing the Panasonic 4-Channel VoIP Gateway Card, KX-TDA5480/KX-TDA0484. Please read this manual carefully before

More information

SOYO G668 VOIP IP PHONE USER MANUAL

SOYO G668 VOIP IP PHONE USER MANUAL SOYO G668 VOIP IP PHONE USER MANUAL Inglos Networks Industrial Global Solutions Teléfono: +1 (585) 217-9864, Fax: + 1 (585) 872-9627, Email: jmesen@inglos.com Table of Content SAFETY INFORMATION... 1 INTRODUCTION...

More information

Further Product Detail: http://www.salvex.com/media/document/nortel%20meridian%2061c%20manual.pdf

Further Product Detail: http://www.salvex.com/media/document/nortel%20meridian%2061c%20manual.pdf Meridian 1 Option 61C PBX General Information: https://en.wikipedia.org/wiki/nortel_meridian Google Images: https://www.google.com/search?q=meridian+1+61c++pbx&biw=1421&bih=901&source=lnms&tbm=isch& sa=x&ved=0cagq_auoamovchmiy9uhhtpaxgivcxg-

More information

Introducing Your Cisco IP Phone

Introducing Your Cisco IP Phone CHAPTER 1 A Cisco IP Phone is a full-feature telephone that provides voice communication over the same data network that your computer uses. This phone functions much like a traditional analog phone, allowing

More information

Operating Instructions

Operating Instructions INTERCOM PLEASE READ BEFORE USE AND SAVE. Integrated Telephone System Operating Instructions Model No. KX-TS8B KX-TS8W Pulse-or-tone dialing capability KX-TS8W LINE Caller ID Compatible Panasonic World

More information

Cisco Unity PBX and T1 IP Media Gateways

Cisco Unity PBX and T1 IP Media Gateways Cisco Unity PBX and T1 IP Media Gateways Description The Cisco Unity IP Media Gateway products are integration devices designed to offer a highquality connection between Cisco Unity or Cisco Unity Connection

More information

In addition to our VoiceDirector hardware products, the following SIP broadband devices are also compatible with VoiceDirector:

In addition to our VoiceDirector hardware products, the following SIP broadband devices are also compatible with VoiceDirector: Device Compatibility Along with the full range of VoiceDirector devices we offer, a number of other SIP telephony products are compatible with the VoiceDirector corporate calling solution In addition to

More information

Part No. P0937240 02. Business Communications Manager 2.5. Telephone Features Programming Guide

Part No. P0937240 02. Business Communications Manager 2.5. Telephone Features Programming Guide Part No. P0937240 02 Business Communications Manager 2.5 Telephone Features Programming Guide 2 Copyright 2001 Nortel Networks All rights reserved. The information in this document is subject to change

More information

Adapter GL386. User Manual is available in other languages at

Adapter GL386. User Manual is available in other languages at Adapter GL386 User Manual is available in other languages at www.glipfone.com GL386 User Manual Contents: Chapter 1 Introduction ---------------------------------------------------------------- 1 Chapter

More information

BRIDGEWAY MOBILE VOIP RADIO-INTERCOM GATEWAY

BRIDGEWAY MOBILE VOIP RADIO-INTERCOM GATEWAY BRIDGEWAY MOBILE VOIP RADIO-INTERCOM GATEWAY BRIDGEWAY 8M The 8M system provides Radio over IP (RoIP) communications interoperability between radio base stations, SATCOM, wireless and wire line telephone,

More information

For a Converged World

For a Converged World For a Converged World ... the right technology, the right time, the right choice. Aspire from NEC is a family of telephone systems ranging in size from 4 to hundreds of extensions tailored to meet the

More information

Model PBX 308 Plus System Administration Guide

Model PBX 308 Plus System Administration Guide Model PBX 308 Plus System Administration Guide Introduction 3 Installation Hints 4 System Programming 5 IMPORTANT Exchange Lines 6 Assign Incoming calls to ring Nominated Extensions 7 Cascade Ringing Of

More information

EDI Distributor Control Interface Wiring and Setup Instructions

EDI Distributor Control Interface Wiring and Setup Instructions Universal I/O EDI Distributor Control Interface Wiring and Setup Instructions EDI UNIVERSAL I/O INTERFACE MODULE The only interface needed for EDI-V5 controls Network compatible with all older EDI controls

More information

For a Converged World

For a Converged World For a Converged World Aspire from NEC allows you to converge your voice and data network and enjoy the many advantages of Voice over Internet Protocol (VoIP) while enjoying the hundreds of features you

More information

3500/22M Transient Data Interface

3500/22M Transient Data Interface 3500/22M Transient Data Interface Bently Nevada* Asset Condition Monitoring Description The 3500 Transient Data Interface (TDI) is the interface between the 3500 monitoring system and GE s System 1* machinery

More information

GXP-2020 6-line SIP Enterprise Phone Quick Installation Guide

GXP-2020 6-line SIP Enterprise Phone Quick Installation Guide 1 GXP-2020 6-line SIP Enterprise Phone Quick Installation Guide WARNING: Please DO NOT power cycle the GXP-2020 when LED lights are flashing during system boot up or firmware upgrade. You may corrupt firmware

More information

Cisco CCNA Optional Semester 4 Labs Wide Area Networking LAB 1 T1 TSU WAN LINK OVERVIEW - Instructor Guide (Estimated time: 30 minutes)

Cisco CCNA Optional Semester 4 Labs Wide Area Networking LAB 1 T1 TSU WAN LINK OVERVIEW - Instructor Guide (Estimated time: 30 minutes) CNAP @ VCC 1 of 8 LAB 1 T1 TSU WAN LINK OVERVIEW - Instructor Guide (Estimated time: 30 minutes) Objectives: Understand the function of a T1 Service Unit (TSU) in network telecommunications Connect routers

More information

DRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters

DRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual

More information

GSM Voice Auto Dialer & SMS Sender JC-999

GSM Voice Auto Dialer & SMS Sender JC-999 GSM Voice Auto Dialer & SMS Sender JC-999 Main features: () Large LCD display,integrated integrated keypad, human-friendly programming; (2) Support 2 alarm receiving numbers; (3) Triggering means: N.C

More information

ENERGY STAR Program Requirements Product Specification for Telephony. Draft 1 Test Method Rev. May-2012

ENERGY STAR Program Requirements Product Specification for Telephony. Draft 1 Test Method Rev. May-2012 ENERGY STAR Program Requirements Product Specification for Telephony Draft 1 Test Method Rev. May-2012 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 OVERVIEW

More information

Configuration Notes 283

Configuration Notes 283 Mediatrix 4400 Digital Gateway VoIP Trunking with a Legacy PBX June 21, 2011 Proprietary 2011 Media5 Corporation Table of Contents Table of Contents... 2 Introduction... 3 Mediatrix 4400 Digital Gateway

More information

Memcom Emergency Telephone

Memcom Emergency Telephone Memcom Emergency Telephone Installation Guide Ref No. 450 900 (GB) Version 2 + + Simple wiring for quick installation + + Integrated LCD display shows you what you have programmed + + All code based programming

More information

Vertex VoIP Caller ID (Version 1.5)

Vertex VoIP Caller ID (Version 1.5) Vertex VoIP Caller ID (Version 1.5) Introduction The Vertex unit is designed to capture Caller ID and other telephony signaling on VoIP phone calls and send this information to computers. Depending on

More information

5006 Centrex AuxBox. Call Recording for Meridian Digital Centrex Telephones. Hardware & Installation Guide

5006 Centrex AuxBox. Call Recording for Meridian Digital Centrex Telephones. Hardware & Installation Guide Call Recording for Meridian Digital Centrex Telephones Hardware & Installation Guide Algo Communication Products Ltd. Customer Support and Sales Tel: 1.877.884.2546 Fax: 604.437.5726 Email: sales@algosolutions.com

More information

3. Connecting to ISDN30. 3. Delivery Options. 6. Customer Interface. 9. Connection of CPE. 10. Supplementary Services. 14. ISDN Applications.

3. Connecting to ISDN30. 3. Delivery Options. 6. Customer Interface. 9. Connection of CPE. 10. Supplementary Services. 14. ISDN Applications. ISDN30 user guide Contents 3. Connecting to ISDN30. 3. Delivery Options. 6. Customer Interface. 9. Connection of CPE. 10. Supplementary Services. 14. ISDN Applications. 15. Fault Reporting. 2 Connecting

More information

DIGITAL SUPER HYBRID TELEPHONE SYSTEM KX-TD308. XDP extra Device Port. Caller ID Display. Voice Mail Integration. Toll Restriction

DIGITAL SUPER HYBRID TELEPHONE SYSTEM KX-TD308. XDP extra Device Port. Caller ID Display. Voice Mail Integration. Toll Restriction DIGITAL SUPER HYBRID TELEPHONE SYSTEM KX-TD308 XDP extra Device Port Caller ID Display Voice Mail Integration Toll Restriction KX-TD308 The Adaptable Digital Solution for Your Small Business or Home Office

More information

CPEi 800/825 Series. User Manual. * Please see the Introduction Section

CPEi 800/825 Series. User Manual. * Please see the Introduction Section CPEi 800/825 Series User Manual * Please see the Introduction Section Contents Introduction...iii Chapter 1: CPEi 800/825 User Guide Overview... 1-1 Powerful Features in a Single Unit... 1-2 Front of the

More information

Quick Connect. quick - simple - efficient. www.g-mw.de

Quick Connect. quick - simple - efficient. www.g-mw.de Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power

More information

PS 29M DUAL CHANNEL BELTPACK IN METAL CASE

PS 29M DUAL CHANNEL BELTPACK IN METAL CASE PS 29M DUAL CHANNEL BELTPACK IN METAL CASE USER MANUAL October 2013 This product is designed and manufactured by: ASL Intercom BV Zonnebaan 42 3542 EG Utrecht The Netherlands Phone: +31 (0)30 2411901 Fax:

More information

Installation Manual for D0700 ISDN Analogue Converter

Installation Manual for D0700 ISDN Analogue Converter Installation Manual for D0700 ISDN Analogue Converter Dycon Ltd Tel: +44 (0)1443 471 060 Fax: +44 (0)1443 479 374 Cwm Cynon Business Park Mountain Ash CF45 4ER - UK www.dyconsecurity.eu sales.en@dyconsecurity.eu

More information

Meridian Digital Telephone IP Adapter Installation and Administration Guide

Meridian Digital Telephone IP Adapter Installation and Administration Guide 555-8421-211 Meridian Digital Telephone IP Adapter Installation and Administration Guide Product release 1.3 Standard 1.1 October 2001 Meridian Digital Telephone IP Adapter Installation and Administration

More information

Trunk Signaling. Figure 1 Subscriber Loop Signaling and Trunk Signaling

Trunk Signaling. Figure 1 Subscriber Loop Signaling and Trunk Signaling Signaling Overview Signaling is the step by step process of completing a telephone call. For example, when you make a telephone call, you lift the handset off of the telephone cradle (known as going off

More information

System Administration Guide. Model KS 832. Expandable up to 1664

System Administration Guide. Model KS 832. Expandable up to 1664 System Administration Guide Model KS 832 Expandable up to 1664 Introduction 4 Installation Hints 4 System Programming 5 - System Password 5 - Changing Password 5 Exchange Line Set up 6 - Caller Display

More information

Model PBX 416 Plus System Administration Guide

Model PBX 416 Plus System Administration Guide Model PBX 416 Plus System Administration Guide Introduction 4 Installation Hints 4 System Programming 5 - System Password 5 - Changing Password 5 - Entering password in Direct 5 Dial Mode Exchange Line

More information

PagePac PAGEPAL V-5335700

PagePac PAGEPAL V-5335700 PagePac Issue 3 by PAGEPAL V-5335700 INTRODUCTION The PagePal unit interfaces most telephone systems (PBX, KTS, Centrex) to virtually any public address audio system. In addition, PagePal furnishes inputs

More information

DWIatt2 USER'S GUIDE

DWIatt2 USER'S GUIDE DWIatt2 USER'S GUIDE Copyright 1998 by KONEXX, Unlimited Systems Corporation, Inc. San Diego, CA. The KONEXX DWIatt2 (Digital Wall Interface) easily connects to your Lucent Definity, or ProLogix Solutions

More information

Model PBX 308 Plus System Administration Guide

Model PBX 308 Plus System Administration Guide Model PBX 308 Plus System Administration Guide Introduction 4 Installation Hints 4 System Programming 5 - System Password 5 - Changing Password 5 Exchange Line Set up 6 - Caller Display 6 - Setting Date

More information

Manufactures of: All. Dallas Delta Corporation Pty.Ltd. Pty.Ltd. 102 Albert St. East Brunswick, 3057 Vic. Tel: 613 93877388 Fax: 613 93873128

Manufactures of: All. Dallas Delta Corporation Pty.Ltd. Pty.Ltd. 102 Albert St. East Brunswick, 3057 Vic. Tel: 613 93877388 Fax: 613 93873128 Dallas Delta Corporation Pty.Ltd. 102 Albert St. East Brunswick, 3057 Vic. Tel: 613 93877388 Fax: 613 93873128 Email: sales@dallasdelta.com.au www.dallasdelta.com.au LP GUARD DOORSTATION MK II G UARD Doorstation

More information

USB/Ethernet to USB Hub - ID# 895

USB/Ethernet to USB Hub - ID# 895 USB/Ethernet to USB Hub - ID# 895 Operation Manual Introduction The USB over Ethernet 4 port Extender is a multi functional USB HUB giving you three different modes of operation: A LAN Mode, an Extender

More information

Model PBX 416+ Programming & User Guide

Model PBX 416+ Programming & User Guide Model PBX 416+ Programming & User Guide 1 Introduction... 5 Installation hints... 5 Wall mounting... 5 System programming... 6 System password... 6 Changing the password... 6 Exchange line set up... 6

More information

Inbound Routing with NetSatisFAXTion

Inbound Routing with NetSatisFAXTion Inbound Routing with NetSatisFAXTion Routing Terms DID Direct Inward Dialing (DID) is a service of a local phone company (or local exchange carrier) that provides a block of telephone numbers for calling

More information

Cisco SPA901 1-Line IP Phone Cisco Small Business IP Phone

Cisco SPA901 1-Line IP Phone Cisco Small Business IP Phone Cisco SPA901 1-Line IP Phone Cisco Small Business IP Phone Durable, Affordable, Feature-Rich IP Telephone for the Home Office and Business Small, affordable, single line business class IP Phone Connect

More information

Setting Up the Cisco Unified IP Phones

Setting Up the Cisco Unified IP Phones CHAPTER 3 This chapter includes the following topics, which help you install the Cisco Unified IP Phones on an IP telephony network: Before You Begin, page 3-1 Understanding the Cisco Unified IP Phone

More information

Electronics Ltd. Presenting. Power, Intelligence... with a sense of feeling

Electronics Ltd. Presenting. Power, Intelligence... with a sense of feeling Electronics Ltd Presenting Power, Intelligence... with a sense of feeling By Appointment to Her Majesty The Queen Supplier of Fire Detection Equipment Kentec Electronics Ltd. Dartford Plug in slots K772

More information

LinkPlus Interface Guide

LinkPlus Interface Guide Panasonic Digital Business System (DBS) LinkPlus Interface Guide SpectraLink 6000 System SpectraLink 8000 System July 2008 Edition 1725-36141-001 Version E LinkPlus Interface Guide: Panasonic Digital Business

More information

User Manual 821121-ATA-PAK

User Manual 821121-ATA-PAK User Manual 821121-ATA-PAK IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to

More information

ADSL Modem Router Setup Manual

ADSL Modem Router Setup Manual ADSL Modem Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10026-01 2006-2 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear,

More information

B890 LTE Wireless Gateway Quick Start

B890 LTE Wireless Gateway Quick Start B890 LTE Wireless Gateway Quick Start HUAWEI TECHNOLOGIES CO., LTD. Figures in this guide are only for your reference. For details about a particular model, contact your service provider. Before purchasing

More information

NEC 2400 IMS --- T1 PRI

NEC 2400 IMS --- T1 PRI UCC / Avaya one-x Speech Server Configuration Note 3610 Version F (05/08) UCC / Avaya one-x Speech NEC 2400 IMS --- T1 PRI T1 PRI/ISDN TRUNKS Central Office Digital Trunks UCC SPEECH ACCESS SERVER AVAYA

More information

Get Started User Guide

Get Started User Guide GUIDE TO SYSTEM DOCUMENTATION 2 Get Started Guide 2 Phone Quick Reference Guide 2 Detailed User Manual 2 Detailed Broadband Module Manual 2 BT VERSATILITY WIZARD User Manual 2 SYSTEM DESCRIPTION 3 System

More information

Innkeeper PBX. Desktop Digital Hybrid. User Guide. JK Audio

Innkeeper PBX. Desktop Digital Hybrid. User Guide. JK Audio Innkeeper PBX Desktop Digital Hybrid User Guide JK Audio Introduction Innkeeper PBX will allow you to send and receive audio through your multi-line PBX, ISDN or analog telephone. While this may seem like

More information

TC easy Plus Alarm. Operating Instructions

TC easy Plus Alarm. Operating Instructions TC easy Plus Alarm Operating Instructions Overview Accessory 1 2 3 4 Plug power supply 12 V optional Emergency power supply NV 2 TC GB 700 900 139 1 LED S1 2 pushbutton S1 3 LED automatic call acceptance

More information

InnoMedia ESBC 9380-4B. Quick Install Guide. www.innomedia.com 1

InnoMedia ESBC 9380-4B. Quick Install Guide. www.innomedia.com 1 InnoMedia ESBC 9380-4B Quick Install Guide www.innomedia.com 1 Table of Contents Introduction 2 Package Contents 2 CAUTION 2 Installation 3 Wall-Mounting Instructions 5 Troubleshooting 6 Appendix A. LED

More information

Universal Host. Desktop Digital Hybrid. User Guide. JK Audio

Universal Host. Desktop Digital Hybrid. User Guide. JK Audio Universal Host Desktop Digital Hybrid User Guide JK Audio Introduction Universal Host will allow you to send and receive audio through your multi-line PBX, ISDN, VoIP or analog telephone. While this may

More information

Remote Office 911x Series Installation and Administration Guide

Remote Office 911x Series Installation and Administration Guide 555-8421-220 Remote Office 911x Series Installation and Administration Guide Product release 1.3 Standard 1.1 October 2001 Remote Office 911x Series Installation and Administration Guide Product release:

More information

Select Engineered Systems Field Bulletin: ATA and Evolving Terminology

Select Engineered Systems Field Bulletin: ATA and Evolving Terminology Select Engineered Systems Field Bulletin: ATA and Evolving Terminology December 2013 As the Cable industry (CATV) has evolved from Analog/RF to digital transmission methods, additional services such as

More information

Innovative DOOR STATION Solutions

Innovative DOOR STATION Solutions Innovative DOOR STATION Solutions When a visitor arrives at your front door or gate we ring... Your mobile when you are out Your normal telephones in your home Your PABX system in your office Communicating

More information

ITEM M -- INSTALL FIELD FRACTIONAL T-1 MULTIPLEXER ITEM M -- FURNISH AND INSTALL TOC FRACTIONAL T-1 MULTIPLEXER

ITEM M -- INSTALL FIELD FRACTIONAL T-1 MULTIPLEXER ITEM M -- FURNISH AND INSTALL TOC FRACTIONAL T-1 MULTIPLEXER DESCRIPTION This work shall consist of installing Field T-1 communications equipment consisting of Fractional T-1 Multiplexer/Demultiplexers (Fractional ADM Multiplexers) equipped with electrical interface

More information

NeoGate TA Series Quick Installation Guide

NeoGate TA Series Quick Installation Guide NeoGate TA Series Quick Installation Guide Version: V1.1 Yeastar Technology Co., Ltd. Date: November 18, 2014 http://www.yeastar.com 1/15 Contents NeoGate TA Series Quick Installation Guide 1. Preparation

More information

Operating Instructions. Telephone System tiptel 1/8 fax clip tiptel 2/8 clip. (Release 2) tiptel

Operating Instructions. Telephone System tiptel 1/8 fax clip tiptel 2/8 clip. (Release 2) tiptel Operating Instructions (UK) Telephone System tiptel 1/8 fax clip tiptel 2/8 clip (Release 2) tiptel Table of Contents Connection of 8 extensions..........3 Connection of 7 extensions and 1 door intercom................4

More information