ADDI9020 GUI User s Guide

Transcription

1 The World Leader in High Performance Signal Processing Solutions ADDI9020 GUI User s Guide DIS April, 2013

2 Contents GUI Installation GUI Operation TG Project development Project files Mode Switching Page 2

3 GUI Installation Download GUI software package: ftp://ftp.analog.com/pub/digital_imaging/adi_tools/addi9020_tools/ Install Microsoft.NET Framework 3.5 or later if not installed already. Run the install package setup_addi9020lite042013_ exe The application(addi9020visualtgide exe) is installed to: Win7(64bit): C:\Program Files (x86)\adi_tools\bin Vista: C:\Program Files\ADI_TOOLS\bin Restart the windows system. Page 3

4 ADDI9020 GUI Operation Menu bar: Tool bar: New project Save project Build project Display simulation output Tabs for edit pages Start Information Signal map Pattern editor Mode editor VD/HD timing Page 4

5 New Project and Open exist project New project can be created by menu bar-> file->new->project Or click Tool bar->new project bar Or from the Start page-> Rapidly start a new ISATG project The new project will be saved to default: C:\Users\xx\Documents\ADI Projects Then the project can be moved to the engineer preferred working directory by save as or manually copy to Open exist Project: Can be done by menu, tool bar or recent projects list(start Page) The project file is backed up to projectname.pxj2_time.bak in case it need recovered from some old stages. such as: ADDI9020_ccd_demo_pxj bak Page 5

6 Information Page: Enter project info, simulation configuration Page 6

7 Signal Mapping: Map imager signal to AFE signals Page 7

8 Mode polarity control Page 8

9 V_Pattern editor XSG_HBLK_pattern editor Add, delete, rename pattern Cut, Copy paste toggles Toggles can be absolute value, or summatio Page 9

10 Mode editor: Rename, Add, delete, move up/down copy mode Page 10

11 Field editor: Add, delete, move up/down Page 11

12 Sequence editor: for pattern link Rename, Add, delete, move up/down copy and comment Advance editor for repeatable sequence group Page 12

13 Sample Code how to define and link patterns? VD HD Seq0 Seq0 Pattern P0 P0 Control if next Sequence/Pattern will wait for HD or not =1: wait for next HD =0: no wait Page 13

14 Sample Code how to define and link patterns? VD Seq0 Seq1 Seq0 Seq1 HD Pattern P0 P1 P0 P1 Page 14

15 Sample Code how to define and link patterns? VD HD P0 repeat n times (n=10) Pattern P0 P0 P0 P1 P0 P0 P0 P1 Page 15

16 VD/HD timing editor: Enter length(line) of each field Enter length(pixel) of each line Enter VD/HD pulse width Page 16

17 Project build and Simulation Configure simulation files and modes Build project by click the icon in tool bar If no error message, simulate the project by click icon If no errors, review the result by click icon If the waveform show up, the tool is installed properly User can focus on CCD timing development Configuration Build Project Simulation Review waveform Page 17

18 TG Project developing procedures 1. Project planning: Study CCD timing sheet figure out patterns allocation,how many modes, Etc Study CCD to AFE connection 2. Edit timing project by GUI Enter project info, Enter modes, fields, polarities for each mode and VD/HD info Enter patterns Link pattern by sequences for each fields 3. Build project and simulate each modes If there are errors, go back to step2 4. On camera check Load the generated loading files(*.lf) to camera to check image Some register settings from GUI generated files can be optimized, like clock phase, driver strength, GPO, SUBCK settings and so on. Page 18

19 GUI related project files Projectname.pxj2: GUI project database file GUI generated loading files(*.lf) which are used for simulation and silicon afestartup.lf : AFE register setup file projectname_data.lf, projectname.lf: TG loading files tgstartup.lf register file: TG register setup file addi9020mux.lf : proper V driver mux settings which can be found in: adi_tools\doc or released demo project package. runsim.tcl file: To save simulation parameters, it will be updated after modify the simulation setting by GUI and rebuild the project. Wave.vcd file: simulation result file Page 19

20 Recommended power up loading sequence Load afestartup.lf register file Load Assembled Program and the mux.lf projectname_data.lf projectname.lf addi9020mux.lf Load tgstartup.lf register file Final write(0x7c22=0x0010) will trigger program to begin running Page 20

21 Mode switching To select mode of operation, write to register 0x4000(tgstartup.lf) Example: For mode 0, set 0x4000=0x0000 For mode 1, set 0x4000=0x0001 For mode 2, set 0x4000=0x0002 and so on.. Followed by 0x7c22=0x0010 to trigger the new mode Page 21