31 st DANUBIA-ADRIA SYMPOSIUM

Transcription

1 Final Program 31 st DANUBIA-ADRIA SYMPOSIUM on Advances in Experimental Mechanics 24 th -27 th September 2014 Kempten, Germany Source: City Kempten

2 31st DAUBIA-ADRIA SYMPOSIUM ON ADVANCES IN EXPERIMENTAL MECHANICS Organized by VDI/VDE-GMA Society for Measurement and Automatic Control and Division 2.10 Experimental Structure Analysis / Structural Health Monitoring In Cooperation with Kempten University of Applied Sciences and BAM Federal Institute for Material Research and Testing Co-organized by Austrian Society of Experimental Strain Analysis (ASESA) Croatian Society of Mechanics (HDM) Czech Society of Mechanics (CSM) Hungarian Scientific Society of Mechanical Engineering (GTE) Italian Association for Stress Analysis (AIAS) Polish Committee for Mechanics of the Polish Academy of Sciences (KMPAN) Romanian Association for Stress Analysis (ARTENS) Serbian Society of Mechanics (SSM) Slovak Society of Mechanics (SSM) Slovenian Society of Experimental Mechanics (SSEM) Committees The following committees will guarantee an attractive and informative symposium program with invited keynote papers and international contributions. The technical and scientific program will include sessions with oral or multimedia presentations, poster presentations, and a technical exhibition. The Scientific Committee will support the publication of selected contributions in distinguished journals. Honorary Members of Scientific Board I. Alfirevic (Zagreb), R. Bedzinski (Wroclaw), R. Beer (Vienna), S. Jecic (Zagreb), A. Freddi (Bologna), S. Holý (Prague), N. Iliescu (Bucarest), I. Pastrav (Cluj-Napoca), F. Thamm (Budapest) Honorary Associate K.-H. Laermann (Wuppertal) Scientific Committee Austria: Croatia: Czech Republic: Germany: Hungary: Italy: Poland: Romania: Serbia: Slovakia: Slovenia: Symposium J. Eberhardsteiner (Vienna) W. Eichlseder (Leoben) L. Krstulović-Opara (Split) D. Semenski (Zagreb) F. Plánicka (Plzen) M. Ružicka (Prague) W. Daum (Berlin) L. Borbás (Budapest) R. Kiss (Budapest) F. Cosmi (Trieste) G. Nicoletto (Parma) Z. Kowalewski (Warsaw) M. Szata (Wroclaw) D.M. Constantinescu (Bucharest) S. D. Pastrama (Bucharest) M. Ognjanovic (Belgrade) M. Zivkovic (Kragujevac) O. Bokuvka (Zilina) P. Palcek (Zilina) I. Emri (Ljubljana) A. Nikonov (Ljubljana) In tradition of the previous Danubia-Adria Symposia on Advances in Experimental Mechanics, DAS 2014 again will highlight latest innovations and many facets of recent R&D work and industrial activities in the area of experimental methods in mechanics. It will provide a forum for discussion of the latest research results, new developments of concepts and technologies, proven techniques, practical applications, and standardization. In addition, it offers the opportunity for an international exchange and transfer of expertise, experience, and new ideas. Symposium Venue Kempten University of Applied Sciences Bahnhofstraße Kempten Germany Accommodation Kempten offers a wide variety of accommodation possibilities. It comprises 4-star-hotels and above to modern motels. The local organizing committee will assist in hotel reservation by pre-reserving of hotel capacity at different categories. 2/10

3 31st DAUBIA-ADRIA SYMPOSIUM ON ADVANCES IN EXPERIMENTAL MECHANICS PRELIMINARY PROGRAM FOR PARTICIPANTS Wednesday, September 24 th 16:00-18:00 Registration 18:00-20:00 Welcome Cocktail - Get Together Thursday, September 25 th 07:30-08:30 Registration 08:30-08:50 Opening Ceremony 08:50-09:50 SESSION 1: Materials Characterization and Testing (keynote lectures) 10:00-10:30 SESSION 1A: Materials Characterization and Testing - Non Metallic (pres. poster) 10:00-10:30 SESSION 1B: Materials Characterization and Testing - Metallic (pres. poster) 10:30-11:30 Discussion of posters of SESSIONS 1A and 1B 11:30-12:30 Lunch 12:30-18:00 Social Event (FENDT, Neuschwanstein Castle) 18:00-20:00 Get Together 19:30-21:00 Meeting Scientific Committee Friday, September 26 th 07:30-08:30 Registration 08:30-10:00 SESSION 2: Practical Applications; Biomechanics (keynote lectures) 10:00-10:30 Coffee Break 10:30-11:30 SESSION 2A: Practical Applications and Case-studies (pres. poster) 10:30-11:30 SESSION 2B: Biomechanics (pres. poster) 11:30-12:30 Discussion of posters of SESSIONS 2A and 2B 12:30-13:30 Lunch 13:30-14:30 SESSION 3: Applied Measurement Techniques (keynote lectures) 14:30-15:00 Coffee Break 15:00-16:30 SESSION 3A: Sensors and Measurement Systems (pres. poster) 15:00-16:30 SESSION 1C: Materials Characterization and Testing (pres. poster) 16:30-18:00 Discussion of posters of SESSIONS 3A and 1C 18:00-19:30 Honorary keynote lectures 19:30-22:30 Symposium-Dinner Saturday, September 27 th 07:30-08:30 Registration 08:30-10:00 SESSION 4: Structural and Materials Analysis (keynote lectures) 10:00-10:30 Coffee Break 10:30-12:00 SESSION 4A: Numerical Methods; Structural Health Monitoring (pres. poster) 10:30-12:00 SESSION 3B: Applied Measurement Techniques (pres. poster) 12:00-13:00 Discussion of posters of Symposium SESSIONS 4A and 3B 13:00-13:30 Closing Cermony 13:30-14:30 Lunch 3/10

4 PRELIMINARY SCIENTIFIC PROGRAM Thursday, September 25 th 08:30 Opening Ceremony Moderation: W. Daum SESSION 1: Materials Characterization and Testing (keynote lectures) 8:50-9:50 Chairman/Moderation: L. Borbás, G. Nicoletto 08:50 Ľubomír Gajdoš, Martin Šperl, Petr Pařízek ROOM TEMPERATURE CREEP OF L360NB+N STEEL 19 09:20 Celina Bernal, María C. Lucchetta, Ramiro Méndez, José Luis Mijares, Mariana Mollo FRACTURE AND FAILURE BEHAVIOUR OF DIFFERENT SELF-REINFORCED POLYPROPYLENE (PP) COMPOSITES BASED ON COMMERCIAL WOVEN AND NON- WOVEN FABRICS SESSION 1A: Materials Characterization and Testing - Non Metallic (pres. poster) 10:00-10:30 Chairman/Moderation: F. Cosmi, M. Stockmann 10:00 Michal Král, Bohuslav Cabrnoch, Matěj Hraška, Stanislav Holý PROPOSAL OF STIFFNESS REDUCTION MODEL FOR COMPOSITE STRUCTURES UNDER MULTIAXIAL FATIGUE LOADING 10:05 Petr Brož, Martin Šolc MODELLING SOME FATIGUE CHARACTERISTICS OF COMPOSITES :10 Mariusz Urbaniak, Tomasz Kubiak COMPRESSED COMPOSITES CHANNEL SECTION COLMUNS :15 Marcin Jankowski, Leszek Czechowski, Jacek Jankowski, Maria Kotełko EXPERIMENTAL AND NUMERICAL ANALYSIS OF SANDWICH BEAMS SUBJECTED TO THREE-POINT BENDING 53 10:20 Engin Erbayrak, Halil Ozer DETERMINATION OF MODE I FRACTURE TOUGHNESS FOR ARALDITE 2015 EPOXY: A COMPARATIVE STUDY 1 10:25 Marko Bek, Joris Betjes, Nikola Holeček, Igor Emri EFFECT OF PRESSURE ON SHEAR RELAXATION OF THERMOPLASTIC POLYURETHANE 40 10:30-11:30 DISCUSSION OF POSTERS OF SESSION 1A 10:00-10:30 SESSION 1B: Materials Characterization and Testing - Metallic (pres. poster) Chairman/Moderation: Z. Kowalewski, W. Habel 10:00 Mihaela Taca, Dan M. Constantinescu, Florin INFLUENCE OF MANUFACTURING CONDITIONS ON THE MECHANICAL PROPERTIES Baciu, Victor Geanta, Dana D. Daisa, Radu OF MICROALLOY STEELS Ştefănoiu :05 Grzegorz Lesiuk, Mieczysław Szata KINETICS OF FATIGUE CRACK GROWTH RATE IN 19TH PUDDLED STEEL EXPERIMENTAL INVESTIGATION AND MODELING 52 10:10 Grzegorz Lesiuk, Mieczysław Szata BRITTLENESS OF THE 19TH CENTURY PUDDLED STEEL - FRACTOGRAPHY ANALYSIS 46 10:15 Christian Garb, Bernd Strohhäussl, Gerhard Winter, Florian Grün ASSESSMENT OF THE EFFECT OF TENSILE OVERLOADS ON THE FATIGUE BEHAVIOUR OF QUENCHED AND TEMPERED STEEL 59 10:20 Carola Kirbach, Martin Stockmann, Joern Ihlemann EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF AL/MG-COMPOUND SPECIMENS UNDER BENDING AFTER MASS FORMING PROCESSES 20 10:25 Mateusz Wirwicki, Tomasz Topoliński ANALYSIS OF STATIC THREE POINT BENDING ZIRCONIUM DIOXIDE SPECIMEN WITH DIFFERENT GEOMETRY :30-11:30 DISCUSSION OF POSTERS OF SESSION 1B Friday, September 26 th SESSION 2: Practical Applications; Biomechanics (keynote lectures) 8:30-10:00 Chairman/Moderation: D. Constantinescu, A. Kranz 08:30 Goran Pavić EXPERIMENTAL ANALYSIS OF PIPE DYNAMICS 29 09:00 09:30 Anton Siller, Christoph Pollak, Andreas Steininger, Friedrich Bleicher, Nicolas Jochum Gábor Katona, Gusztáv Fekete, Béla M. Csizmadia INTERDEPENDENCE OF THE COOLANT QUALITY AND THE FORMATION OF A TRIBOCHEMICAL REACTION IN THE PROCESSING OF PARALLEL COMPOSITE MATERIALS IN CONTINUOUS CUTTING EMPIRICAL DESCRIPTION OF KNEE ROTATION SEGMENTS SESSION 2A: Practical Applications and Case-studies (pres. poster) 10:30-11:30 Chairman/Moderation: M. Ognjanovic, S. Holý 10:30 Sebastian Frank, Robert Weiß, Sven Leipold INSTRUMENTING AN AIRCRAFT WITH STRAIN GAUGES /10

5 10:35 Lechner Christoph, Habersohn Christoph, Kalkan Yakup, Bleicher Friedrich INVESTIGATION OF THE INFLUENCE OF WORKPIECE CLAMPING DEPENDED VIBRATION ON MACHINE HAMMER PEENED SURFACES 6 10:40 Tomislav Bosiljkov, Sven Karlović, Damir Semenski, Mladen Brnčić, Branko Tripalo, Damir Ježek, Filip Dujmić IMPLEMENTATION OF ULTRASOUND AND HIGH HYDROSTATIC PRESSURES AS USEFUL MECHANICAL METHODS IN FOOD PROCESSING 12 10:45 Andreas Fritsche, Friedrich Bleicher COMPARISON OF TWO STATE OF THE ART GRINDING COOLING TECHNOLOGIES 13 10:50 10:55 Milan Růžička, Josef Jurenka, Martin Nesládek, Ján Džugan Klaus Vogel, Michael Heinrich, Jens Ulbricht, Holg Elsner, Lothar Kroll COMPLEX LOADING FATIGUE TESTS OF THE TURBINE BLADE 15 MODELING OF GFRP SPRING FOR AUTOMOTIVE APPLICATION 18 11:00 M. Koch, W. Kaal INVESTIGATION OF THE OPERATIONAL VIBRATION CHARACTERISTICS OF A FREIGHT CAR TO DESIGN ENERGY HARVESTING SENSORS 31 11:05 Ákos Vinkó WHEEL SLIP DETECTION BY USING WHEEL MOUNTED INERTIAL SENSOR 45 11:10 Jasmina Lozanović Šajić, Uroš Tatić, Saša Petrović, Emina Džindo CONTROL ALGORITHM APPLIED ON THE DIESEL ENGINE :15 Sebastian Laux, Hans-Juergen Feige, Jan MEASUREMENT METHOD FOR THE ANALYSIS OF TEMPERATURE FIELDS DURING Gluehmann, Michael Schneeweiss, Juergen Vogel THE MQL PROCESSING :20 Christof Salcher, Stephan Verfoort 11:25 S. Hofmann, E. Leidich MEASUREMENT, SIMULATION, TESTING AND PREDICTION OF MECHANICAL STRUCTURES ON THE FATIGUE STRENGTH OF CASE-HARDENED KEYED SHAFT-HUB CONNECTIONS :30-12:30 Discussion of posters of SESSION 2A 10:30-11:30 SESSION 2B: Biomechanics (pres. poster) Chairman/Moderation: O. Bokůvka, M. Milošević, Werner Daum 10:30 10:35 10:40 Nägerl Hans, Schelper Ina, Strempel Friederike, Kubein-Meesenburg Dietmar, Wachowski, Martin M., Dumont Clemens, Dathe Henning Henning Dathe, Riccardo Gezzi, Dietmar Kubein-Meesenburg, Kirsten-Marina Thieme, Dankmar Ihlow, Hans Nägerl Miroslav Omasta, Branislav Hadzima,, Filip Pastorek ELBOW COMPLEX: CURVATURE MORPHOLOGY OF THE ARTICULAR 22 ISOMETRIC PAIR OF AXES WITH APPLICATION TO THE HUMAN MANDIBLE 23 ELECTROCHEMICAL CHARACTERISTICS OF ELECTRON 21 MAGNESIUM ALLOY WITH DICALCIUM PHOSPHATE DIHYDRATE (DCPD) COATING 38 10:45 Jan Kolínský, Ludmila Nováková, Josef Adamec SIMULTANEOUS FLOW FIELD AND TUBE WALL DEFORMATION MEASUREMENT 50 10:50 Hawraa Kariem, Maria-Ioana Pastrama, Seyed Iman Roohani-Esfahani, Peter Pivonka, Hala Zreiqat, Christian Hellmich 10:55 Aleksandra Dragičević, Djuro Koruga 11:00 Fabijan Lulić, Zdravko Virag, Ivan Korade MICRO-ELASTICITY OF POROUS CERAMIC BAGHDADITE: A COMBINED ACOUSTIC- NANOINDENTATION APPROACH SUPPORTED BY HOMOGENIZATION THEORY BIOMECHANICAL TISSUE ORDER BASED ON PEPTIDE PLAINS OSCILLATORY ENERGY DISTRIBUTION OF COLLAGEN AND TUBULIN THE RATE OF RIGHT VENTRICLE PRESSURE RISE: RESULTS COMPARISON FROM INVASIVE AND NON-INVASIVE METHOD :05 Liza Pelyhe, Péter Nagy, Eszter Bognár VISIBILITY DIFFERENCES WITHIN THE DIAGNOSTIC CATHETER :10 Eszter Bognár ANALYSIS OF EXPLANTED CORONARY STENTS :15 Angela Andrzejewska, Adam Mazurkiewicz ANALYSIS OF DISPLACEMENT IN FEMUR FRACTURE PLATE FIXATION :20 Milena Gordon, Małgorzata Słomion, Adam Mazurkiewicz DESIGN DEVICE FOR FRICTION COEFFICIENT EXAMINATION OF ARTICULAR CARTILAGE :25 Bartosz Babiarczuk, Justyna Krzak, Jerzy Kaleta SOL-GEL SILICA-BASED COATINGS FUNCTIONALIZED WITH VITAMIN E :30-12:30 Discussion of posters of SESSION 2B 13:30-14:30 Time SESSION 3: Applied Measurement Techniques (keynote lectures) Chairman/Moderation: I. Emri, K.-H. Laermann Title Ref. nr. 13:30 Cristian Cătălin Petre, Mihai Valentin Predoi, Mihail Boiangiu, Marian Soare ULTRASONIC INSPECTION OF PIPES USING ADAPTED WEDGES /10

6 14:00 Erdem Akay, Halit S. Türkmen, Mehmet Yıldız MULTIAXIAL STRAIN MEASUREMENT USING EMBEDDED FBG SENSORS DURING THE FATIGUE TESTING OF FRP COMPOSITES 47 SESSION 3A: Sensors and Measurement Systems (pres. poster) 15:00-16:30 Chairman/Moderation: F. Plánička, D. Semenski 15:00 Fuchs Martin, Habersohn Christoph, Kalkan Yakup, Lechner Christoph, Bleicher Friedrich METROLOGICAL INVESTIGATION OF AN ACTUATOR DEVICE FOR VIBRATION- ASSISTED TURNING 10 15:05 Christian Sprock, Walter Sextro VIBRATION ANALYSIS OF MECHANICAL STRUCTURES USING MULTISINE EXCITATION SIGNALS 42 15:10 Marija Samardžić, Jovan Isaković, Marko Miloš EXPERIMENTAL METHODOLOGY FOR DETERMING STABILITY DERIVATIVES IN THE T-38 WIND TUNNEL :15 R. Herrmann, M. Stockmann, S. Marx LONGTERM STABILITY OF STRAIN GAGES 43 15:20 Dirk Eberlein, Thomas Kleckers & Peter Ackermans HIGH SPEED DATA ACQUISITION IN STRAIN MEASUREMENT :25 Nina Gras, Birgit Aigner, Torsten Brauner, Thomas Horstmann, INERTIAL SENSORS TO DISTINGUISH THE POSTURAL STABILITY ON PROGRESSIVELY INSTABLE DEVICES :30 Peter Ficzere, Lajos Borbás 15:35 Andreas Friedmann A NEW MEASUREMENT TECHNOLOGY TO DETERMINE THE SHEAR MODULUS USING POOR TENSILE TEST WITHOUT APPLYING POOR SHEAR EXTERNAL LOAD DATA ACQUISITION NETWORK FOR SHM IN WIND TURBINES TOWERS THE PROJECT»ANÜBeS« :40 Miloš Milošević, Simon Sedmak, Uros Tatic, Jasmina Perovic, Mirko Pavišić, Nenad Mitrović STEREOMETRIC DISPLACEMENT AND STRAIN ANALYSIS IN THE DEVELOPMENT OF INNOVATIVE EXPERIMENTAL SETUPS :45 Enrico Köppe, Detlef Hofmann, Werner Daum ABSOLUTE MEASURING EFPI-MEASUREMENT SYSTEM :50 Philipp Rohwetter, Chaiyaporn Lothongkam, Gerd Heidmann, Wolfgang Habel FIBRE-OPTIC ACOUSTIC EMISSION SENSORS FOR HIGH VOLTAGE ENVIRONMENTS :55 Milan Steffen, Sascha Liehr, Katerina Krebber QUASI -DISTRIBUTED STRAIN & VIBRATION MEASUREMENT USING I-OFDR AND EFPI SENSORS :00 Harald Kohlhoff 16:05 16:10 Susann Hannusch, Christian Auerswald, Martin Stockmann, Sebastian Voigt, Jörn Ihlemann, Jan Mehner Yijie Sun,, Bin Shi, Katerina Krebber, Wolfgang R. Habel DETERMINING THE SPATIAL FORM OF ROCK SAMPLES IN TRIAXIAL TESTING CELLS A FIBER-OPTIC MEASUREMENT CONCEPT SENSITIVITY INVESTIGATIONS OF FIBRE BRAGG GRATING SENSORS CONSIDERING DIFFERENT INTERROGATOR SYSTEMS RESEARCH ON DISTRIBUTED FIBER SENSING BASED MONITORING IN GEO-ENGINEERING :15 16:20 Andrea Senze, Anne Schwartz, Stephan Großwig, Karl-Heinz Haase Wolfgang Habel, Vivien Schukar, Franziska Mewis, Frank Basedau PROS AND CONS FOR FIBEROPTICAL SENSORS IN GEOTECHNOLOGY 1019 THE ROLE OF STANDARDIZATION IN ESTABLISHING YOUNG MEASUREMENT TECHNOLOGIES BY THE EXAMPLE OF FIBRE-OPTIC SENSOR TECHNOLOGY FOR DEFORMATION ASSESSMENT OF STRUCTURES :30-18:00 Discussion of posters of SESSION 3A SESSION 1C: Materials Characterization and Testing (pres. poster) 15:00-16:30 Chairman/Moderation: L. Krstulović-Opara, J. Eberhardsteiner 15:00 Simon A. Sedmak, Ana Petrović, Uroš Tatić, Taško Maneski, Aleksandar Sedmak DETERMINING OF ELASTICITY MODULUS OF FIBERGLASS REINFORCED PLASTIC GRATING USING FINITE ELEMENT METHOD :05 Attila Kossa EFFECT OF THE MODELING OF LATERAL STRETCH IN THE PARAMETER IDENTIFICATION ALGORITHM OF HYPERELASTIC FOAM MATERIALS 9 15:10 Otakar Bokůvka, Libor Trško, František Nový, Mario Guagliano INFLUENCE OF VARIOUS FACTORS ON ULTRAHIGH-CYCLE FATIGUE STRENGTH OF STRUCTURAL MATERIALS :15 Eva Tillová, Lenka Hurtalová 15:20 Dresslerová Zuzana, Palček Peter EFFECT OF CASTING FILTRATION TO MECHANICAL PROPERTIES OF AlSi7Mg0.3 CAST ALLOY TEMPERATURE DEPENDENCE OF THE INTERNAL FRICTION OF AZ91 MAGNESIUM ALLOY :25 Bernhard Pichler, Ilja Fischer, Erhardt Lach, Christina Terner, Elodie Barraud, Fabienne Britz QUASI-STATIC AND HIGH-DYNAMIC COMPRESSIVE STRENGTH TESTING OF YOUNG AND MATURE CEMENT PASTES :30 Leopold Wagner, Clémence Bos, Thomas K. Bader, Josef Eberhardsteiner MOISTURE-DEPENDENT MECHANICAL PROPERTIES OF SOFTWOOD AND HARDWOOD CELL WALLS: A NANOINDENTATION STUDY 57 15:35 Jan Klesa, Vincet Placet, Jan Krystek, Morvan Ouisse, Emmanuel Fôltete, Pauline Butaud SHAPE MEMORY PROPERTIES OF THE CHS-E520 AND CHS-E531 EPOXY RESINS WITH THE HARDENER P /10

7 15:40 Alyona Bashir, Włodzimierz Dudziński THE MATERIALS USED FOR ROTOR BLADES IN STEAM TURBINES 37 15:45 Michał Królewicz, Jerzy Kaleta, Daniel Lewandowski, Paweł Małecki INFLUENCE OF MAGNETIC PARTICLE CONTENT ON SELECTED PROPERTIES OF MAGNETORHEOLOGICAL ELASTOMERS 4 15:50 Lenka Hurtalová, Eva Tillová THE BASIC MECHANICAL PROPERTIES OF AlSi7Mg0.3 CAST ALLOY AT DIFFERENT TESTING TEMPERATURE AFTER MODIFICATION WITH Sb :55 Soviarová Andrea, Palček Peter, Dresslerová Zuzana DEVELOPMENT OF PRECIPITATION IN MAGNESIUM ALLOY WITH 9 % Al BY ULTRASONIC SPECTROSCOPY :00 16:05 Tadeusz Smolnicki, Grzegorz Przybyłek, Damian Derlukiewicz Damian Derlukiewicz, Artur Górski, Wojciech Wesołek, presented by Paulina Dzialak 16:10 Damian Derlukiewicz, Adam Wilanowski STUDY OF DEFORMATION REASONS OF THE OVEN CHAMBER DURING THE ENAMELING PROCESS CONCEPTUAL DESIGN AS THE PART OF DESIGNING PROCESS OF THE SPECIAL PURPOSE FLAT BOTTOM BOAT IMPLEMENTATION OF DESIGN THINKING METHODOLOGY IN CONCEPTUAL DESIGN AND TESTING OF THE NEW LAMP STRUCTURE :15 Damian Derlukiewicz, Piotr Stocki, presented by Piotr Odyjas DESIGN THINKING IN CONCEPTUAL DESIGN OF THE INNOVATIVE MOTORCYCLE :20 Anna Szczurek, Justyna Krzak Jerzy Kaleta 16:25 Lovre Krstulović-Opara, Martin Surjak, Matej Vesenjak, Zdenko Tonković, Janoš Kodvanj, Željko Domazet 16:30-18:00 Discussion of posters of SESSION 1C SILICA AND SILICA/TITANIA HYBRID COATINGS REDUCING THE PERMEABILITY OF GASES FOR USE IN HIGH PRESSURE VESSELS COMPARISON OF INFRARED AND 3D DIGITAL IMAGE CORRELATION TECHNIQUES APPLIED FOR MECHANICAL TESTING OF MATERIALS :00-19:30 Honorary keynote lectures Chairman/Moderation: W. Daum 18:00 Karl-Hans Laermann CONSIDERATIONS ON UNCERTAIN QUANTIFICATION IN STRUCTURAL ANALYSIS :30 A. Bernasconi, E. Conrado, F. Cosmi FIBRE ORIENTATION EFFECTS AT WELD-LINES OF A PA6.6GF :00 Andreas Rupp, Michael Plitzner DAMAGES ON BELLS AND THEIR PREVENTION - METHODS FOR A SMOOTH BELL RINGING WITH A HIGH SOUND QUALITY Saturday, September 27 th SESSION 4: Structural and Materials Analysis (keynote lectures) 8:30-10:00 Chairman/Moderation: M. Szata, St. D. Pastrama 08:30 09:00 09:30 Maria Kotełko, Radosław Mania, Artur Mołdawa Joamin Gonzalez-Gutierrez, Sergio Carrillo De Hert, Bernd Steffen von Bernstorff, Igor Emri Aleksandra Dragičević, Zoran Krivokapić, Aleksandra Vasić-Milovanović, Djuro Koruga AXIAL CRUSHING OF THIN-WALLED COLUMNS-EXPERIMENTAL VALIDATION OF THEORETICAL MODELS PREDICTION OF VISCOSITY OF PIM FEEDSTOCK MATERIALS WITH DIFFERENT PARTICLE SIZE DISTRIBUTION STRUCTURAL HEALTH MONITORING OF COLON EPITHELIAL TISSUE BY OPTOMAGNETIC IMAGING SPECTROSCOPY 10:30-12:00 SESSION 4A: Numerical Methods; Structural Health Monitoring (pres. poster) Chairman/Moderation: P. Palček, M. Růžička Time Title Ref. nr. 10:30 Radek Kottner, Jiří Kocáb, Tomáš Kroupa, Jan Krystek CHARACTERIZATION OF CORK/RUBBER COMPOSITE AND MODELING OF OBSERVED MECHANICAL BEHAVIOR 10:35 A. Klunker, T. Wilk, W. Daum DIFFERENT NUMERICAL METHODS AROUND THE SHPB EXPERIMENT :40 Cheng-Chieh Wu, Sven Weisbrich, Frank Neitzel INTEGRATED STRUCTURAL ANALYSIS OF HYBRID MEASUREMENT AND FINITE ELEMENT METHOD FOR DAMAGE DETECTION WITHIN A SLENDER BEAM :45 Petr Kesl, František Plánička 10:50 Tadeusz Szymczak, Zbigniew L. Kowalewski POSSIBILITY OF APPLICATION OF THE SIMULATION BASED RELIABILITY ASSESSMENT METHOD IN MODELING OF PROBABILITY OF FAILURE OF STRUCTURE APPLICATION OF FEM AND DIC TO ANALYSIS OF FRACTURE ENFORCED IN MATERIALS BY GEOMETRICAL DISCONTINUITIES :55 Roman Hawranek, Jerzy Czmochowski, Maciej Zawislak EVALUATION OF LIQUID METALS FILTRATION MECHANISM USING SIMULATION SOFTWARE :00 Benedikt Mundl, Michael Städele, Andreas Rupp DERIVATION OF STRESS AND LOAD SIGNALS IN DIFFERENT AREAS OF VEHICLES DURING LONG TERM MEASUREMENTS BY USING LEAD-QUANTITIES 36 11:05 Jan Krejčí, Hedvika Kovandová, Jan Kovanda, Pavel Tulach COLLISION BETWEEN RAIL AND ROAD VEHICLES 51 7/10

8 11:10 11:15 B. Borak, K. Łuszczyk, M. Jasiorski, A. Baszczuk, J. Kaleta Rosemarie Helmerich, Boris Milmann, Jens Woestmann IMINO-FUNCTIONALIZED MONODISPERSE SPHERICAL SILICA SPHERES 1069 BOND DURABILITY OF CFRP-LAMINATES ON CONCRETE BRIDGES :20 Dr. Ansgar Kranz, Dr. Martin Bos ENHANCED TEST CONCEPT FOR THE PROOF OF INTEGRITY OF A CNG GAS SPHERE 16 11:25 Mahdi Rahmani, Reinhard Zisser-Pfeifer, Stephan Krall, Friedrich Bleicher EXPERIMENTAL INVESTIGATION ON STATIC STIFFNESS AND FRICTION BEHAVIOR OF BALL BEARING LINEAR MOTION GUIDES 24 11:30 Georg Hochreiner, Michael Schweigler, Josef Eberhardsteiner ASSESSMENT OF EMBEDMENT AND PLUG-TENSION-SHEAR FAILURE OF DOWEL GROUPS BY DIC-MEASUREMENTS 30 11:35 Philip Becht, Andreas Friedmann NUMERICAL AND EXPERIMENTAL EVALUATION OF SIGNAL STATISTICS FOR STRUCTURAL HEALTH MONITORING 32 11:40 Klaus Brandes, Werner Daum, Detlef Hofmann, Petra Kubowitz LAGRANGE MULTIPLIER TEST FOR STRUCTURAL DAMAGE OF BRIDGES 34 11:45 J. Rohlfing, D. Mayer DUAL USE OF VELOCITY FEEDBACK CONTROL UNITS FOR ACTIVE VIBRATION CONTROL AND STRUCTURAL HEALTH MONITORING 35 11:50 Horia Alexandru Petrescu, Stefan Dan Pastrama SMALL SCALE FINITE ELEMENT SIMULATIONS FOR OBTAINING THE ELASTIC CONSTANTS OF A GLASS FIBER REINFORCED COMPOSITE :00-13:00 Discussion of posters of SESSION 4A 10:30-12:00 SESSION 3B: Applied Measurement Techniques (pres. poster) Chairman/Moderation: I. Alfirevic, A. Rupp 10:30 Detlef Hofmann, Petra Kubowitz, Wolfgang Habel, F. Basedau, Klaus Brandes EMBEDDING OF FIBRE-OPTIC SENSORS IN HIGH-PERFORMANCE TIMBER STRUCTURES 49 10:35 Martin Rudolph, Martin Stockmann, Ralf Landgraf, Jörn Ihlemann EXPERIMENTAL SETUP FOR REAL-TIME MEASUREMENT OF VOLUMETRIC SHRINKAGE 25 10:40 Martin Stockmann, Martin Rudolph, Jörn Ihlemann MEASUREMENT OF SHRINKAGE IN CURING EPOXY-RESIN USING SHADOW MOIRÉ METHODE 27 10:45 Juergen Vogel, Hans-Juergen Feige, Jens Saupe, Juergen Grimm MECHANICAL MATERIAL PROPERTIES OF PHOTORESISTS ANALYZED BY A MICRO LOAD DEVICE COUPLED WITH DIC 17 10:50 Freddy Florez, Reinhard Prenner, Norbert Krouzecky AIR ENTRAINMENT MEASUREMENTS IN A FREELY FALLING WATER JET 26 10:55 Thomas Siebel, Mihail Lilov, Dawid Metzner ELECTROMECHANICAL IMPEDANCE FOR LOCAL INTEGRITY ASSESSMENT 33 11:00 Gianni Nicoletto, Riccardo Codilupi, Anellino Stocchi ANISOTROPIC STRAINS OF FDM ABS BY DIGITAL IMAGE CORRELATION :05 Viktor Feller, Frank Mielentz, Reinhold Orglmeister EVALUATION OF A SOUND FIELD MODELLING BASED ON POINT SOURCE SYNTHESIS TECHNIQUE FOR THE DESIGN OF ULTRASONIC PROBE ARRAY :10 11:15 P. P. Neumann, H. Kohlhoff, K.-D. Werner, J. Erdmann, B. Eggeringhaus, M. Kammermeier, M. Schukar, F. Basedau, M. Bartholmai, D. Lazik, S. Ebert Markus Stoppel, Matthias Bartholmai, Sergej Petrov, Abdalla Fakhouri SETUP OF A LARGE SCALE SOIL TEST FIELD WITH CO2 INJECTION FOR TESTING A NOVEL DISTRIBUTED SUBSURFACE MONITORING SYSTEM FOR GAS STORAGE AREAS SUITABILITY OF EMBEDDED RFID-SENSORS FOR CONCRETE BRIDGE STRUCTURES :20 Tabea Wilk, Werner Daum PULSE SHAPING AND ALIGNMENT TESTS WITH THE SPLIT HOPKINSON PRESSURE BAR FOR VALIDATION :25 Matthias Bartholmai, Klaus-Dieter Werner, Michael Kammermeier HOPKINSON BAR METHOD FOR TEMPERATURE DEPENDENT TESTING AND CALIBRATION OF ACCELEROMETERS :30 Paweł Maślak, Tadeusz Smolnicki INNOVATIVE SYSTEM FOR DETECTING DEFECTS IN THE CONVEYOR BELT :35 Milosav Ognjanovic, Milos Ristic, Sanja Vasin TEST DEVICE FOR SYMULTANIOUS PROBABILISTIC TESTING OF GEAR FLANK ENDURANCE :40 Andreas Rupp, Beate Wenzel LOAD DETERMINATION ON LANDING GEARS :00-13:00 Discussion of posters of SESSION 3B 13:00-13:30 Closing Cermony Moderation: W. Daum 8/10

9 31st DAUBIA-ADRIA SYMPOSIUM ON ADVANCES IN EXPERIMENTAL MECHANICS Sponsored by 9/10

10 31st DAUBIA-ADRIA SYMPOSIUM ON ADVANCES IN EXPERIMENTAL MECHANICS Contact Dipl.-Ing. Jürgen Berthold VDI/VDE-GMA Society for Measurement and Automatic Control, Düsseldorf Phone: Mrs. Nina Kaczor (Symposium Secretary) VDI/VDE- GMA Society for Measurement and Automatic Control, Düsseldorf Phone: Further information Further details on the symposium can be found on the official website: 10/10