ALWAYS TEST THE INSTALLATION ONCE A RELAY IS INSTALLED, TO ENSURE THE VEHICLE CANNOT BE STARTED IN GEAR.

Transcription

1 Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide The XK09-NISS2 is an override OEM Transponder Immobilizer Via Data (No Key Required). Interfaces directly with the latest models in Nissan & Infinity ignition immobilizer systems to provide seemless, safe and secure system integration when adding an aftermarket remote starter. Dependable in all weather conditions, XK09- Upgradable Vehicle Interface Solutions are the best option when reliable & secure remote starting is your goal. IMPORTANT! Index Ensure that the neutral safety relay is installed on this vehicle. It prevents the vehicle from being remote started in gear and lurching forward, causing damage or injury. The wire colors sometimes differ from model to model than what is specified in the installation guide. Please use the specific pin locations when making these connections instead of relying on the wire colors. ALWAYS TEST THE INSTALLATION ONCE A RELAY IS INSTALLED, TO ENSURE THE VEHICLE CANNOT BE STARTED IN GEAR. Vehicle Application Guide Installation Wiring Diagram... Auto Headlamp Shutoff Connection Types... Infinity Vehicle Wiring Reference Chart... Nissan Vehicle Wiring Reference Chart... IPDM-E/R Wiring: Nissan Armada, Rogue, Sentra & Versa... IPDM-E/R Wiring: Nissan Cube... IPDM-E/R Wiring: Infiniti QX56, Nissan Frontier & Pathfinder... Locating the IPDM-E/R in the Vehicle Programming Module Programming... Module Reset... LED Diagnostics... Warranty TECHNICAL SUPPORT / INFORMATION Infiniti, Nissan and Suzuki are registered trademarks and property of their respective companies. web resources:

2 Vehicle Application Guide Page 2 Vehicles AV-Parking Lights Control DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock DL-Trunk / Hatch Release FOB-Control of aftermarket alarm with OEM remote PK-Immobilizer Bypass-Data No Key Req'd RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Driver Door Pin SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin Infiniti EX35 D D D EX37 D D D FX35 D D D FX35 D D D D D FX35 FX35 (Smart Key) D D D D FX45 D D D D D FX45 FX45 (Smart Key) D D D D FX50 D D D G35 D D D G35 D D D D D G35 G35 (Smart Key) D D D D G35 Coupe D D D D D G35 Coupe G35 Coupe (Smart Key) D D D D G35 Coupe (Smart Key) D D D D G35 Coupe (Smart Key) D D D D G37 D D D M35 D D D D M45 D D D D Q45 D D D D D QX56 D D D D QX56 D D D D D QX56 QX56 (Smart Key) D D D D Nissan 350Z D D D D D 350Z 370Z D D D Altima D D D Altima D D D D D Armada D D D D D Armada Armada (Smart Key) D D D Cube D D D D D Frontier D D D D Legend: D: Data-to-Data (D2D) only AV: Horn & Lights Control PK: Transponder & Immobilizer Override SS: Entry Point Status-Security : D2D and Wire-to-Wire (W2W) DL: OE Door Lock & Alarm Controls RS: Engine Start & Status ST: Function/Feature Status FOB: Sync CAN Interface w /FOB Remote ST-Ignition Status ST-Keysense Status

3 Page 3 Vehicles AV-Parking Lights Control DL-Arm Factory Security DL-Disarm Factory Security DL-Door Lock Control DL-Door Unlock DL-Driver Priority Unlock DL-Trunk / Hatch Release FOB-Control of aftermarket alarm with OEM remote PK-Immobilizer Bypass-Data No Key Req'd RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Driver Door Pin SS-Entry Monitoring Hood Pin SS-Entry Monitoring Trunk/Hatch Pin Nissan GT-R D D D D Maxima D D D Maxima D D D D Maxima D D D D D Maxima Murano D D D Murano D D D D D Murano Murano (Smart Key) D D D D NAVARA D D D D Pathfinder D D D D D Pathfinder (Smart Key) D D D D QASHQAI D D D D Quest D D D D D Quest Rogue D D D D D Rogue (Smart Key) D D D D D Sentra D D D D D Sentra (Smart Key) D D D D D Titan D D D D Titan Versa D D D D D Versa (Smart Key) D D D D D Xterra D D D D D Xterra D D D D X-Trail Suzuki Equator D D D D Legend: D: Data-to-Data (D2D) only AV: Horn & Lights Control PK: Transponder & Immobilizer Override SS: Entry Point Status-Security : D2D and Wire-to-Wire (W2W) DL: OE Door Lock & Alarm Controls RS: Engine Start & Status ST: Function/Feature Status FOB: Sync CAN Interface w /FOB Remote ST-Ignition Status ST-Keysense Status

4 Wiring Diagram Page 4 Intelli-Key Unit Hood Ignition 1 Ignition 2 ONLY make this connection in the Nissan Rogue,X-Trail and Qashqai, which are equipped with Intelli-Key and without Push-to-Start (PTS). Refer to page 7 for more information. (-) Trunk ReleaseOutput** (-) Unlock Output** (-) Lock Output** (-) Parking Lights Input (-) GWR (status) Output Starter Remote (-) Neutral Safety (DEI platforms only) Ground (AC) Tach Output* (-) Door Sense Input (-) Trunk Sense Input (-) Hood Sense Input Start Brake Accessory 1 Accessory 2 (+) 12 V Input (+) 12 V (-) GWR 87a (status) 30 TX (-) Ground RX (+) 12 V Option A: Firmware upgrades (XKD2D65). Option B: Plug D2D harness directly into remote starter. To LED Optional +12VDC Optional connection: If not used, the security light will be ON during remote start and shut off, after takeover. To prevent this, add an external relay as seen below. Wire Side View of BCM 23 1: (+) 12 V 2: RX 3: (-) Ground TX 1: Blue/White: (-) GWR (status) Input 2: Purple/Black: (-) Parking Lights Input 3: Light Green: (-) Lock Input** 5: Blue: (-) Unlock Input** 6: Red/White: (-) Trunk Release Input** 9: Red: (+) 12 V 10: Black: Ground Input 15: Yellow: (-) Security LED 17: Orange: (-) Security LED 19: Tan: CAN Low 20: Tan/Black: CAN High CAN Low CAN High The Tan and Tan/Black wires can also be connected at the OBDII diagnostic connector, pins 6 and XK : Blue/Red: (-) Hood Sense Output 3: Gray: (-) Trunk Sense Output 2: Green: (-) Door Sense Output 1: Violet/White: (AC) Tach Output* 4: - 3: - 2: - 1: Red/Blue: Auto Headlamp Shutoff*** Programming Button Autolights OFF connection: See Wiring Reference Chart (p. 5-6) to know which connection type to use according to your vehicle on page 7. For models, a relay must be added to prevent starter damage. Refer to pages 8, 9 and 6 for the IPDM-E/R wiring of a specific vehicle. Refer to the Vehicle Wiring Reference Chart on page 8 to see where the BCM and Intelligent-Key Unit are located in each vehicle. Not required in D2D mode. * The Tach wire is an optional connection required on some remote starters not supporting tach signal in D2D. ** Verify the Vehicle Application Guide on pages 2 and 3 to confirm that your vehicle supports this feature. *** If the kit you have purchased does not include a 4-pin black harness to accommodate these wires, use a D2D or relay pack harness.

5 Infinity Vehicle Wiring Reference Chart Page 5 Vehicles Compatibility CAN Wires Information CAN HIGH Wire Color OBDII Pin 6 BCM Pin 22 CAN LOW Wire Color OBDII Pin 14 BCM Pin 21 Autolights OFF Information Autolight OFF at Autolight BCM Connection Security LED Information Security LED at IPDM-E/R Information IPDM-E/R (Relay required to prevent starter damage) Vehicle Years BCM BCM Location Pin Wire Color Type (p.7) Pin Wire Color Infiniti EX See Vehicle-Specific Guide Not needed 49 Green Passenger kick panel See Vehicle-Specific Guide EX See Vehicle-Specific Guide Not needed 49 Green Passenger kick panel See Vehicle-Specific Guide FX See Vehicle-Specific Guide Not needed 49 Green Passenger kick panel See Vehicle-Specific Guide FX Blue Pink 33 Green 2 38 Green/Orange Driver kick panel Not needed FX Blue Red 33 Green 2 38 Green/Orange Driver kick panel Not needed FX35 (Smart Key) Blue Pink 33 Green 2 38 Green/orange Driver kick panel Not needed FX35 (Smart Key) Blue Red 33 Green 2 38 Green/orange Driver kick pane Not needed FX Blue Pink 33 Green 2 38 Green/Orange Driver kick panel Not needed FX Blue Red 33 Green 2 38 Green/Orange Driver kick panel Not needed FX45 (Smart Key) Blue Pink 33 Green 2 38 Green/orange Driver kick panel Not needed FX45 (Smart Key) Blue Red 33 Green 2 38 Green/orange Driver kick panel Not needed FX See Vehicle-Specific Guide Not needed 49 Green Passenger kick panel See Vehicle-Specific Guide G See Vehicle-Specific Guide Not needed 49 Red or green Passenger kick panel See Vehicle-Specific Guide G Blue Pink 33 Blue 2 38 Green/Orange Driver kick panel Not needed G Blue Red 33 Blue 2 38 Green/Orange Driver kick panel Not needed G35 (Smart Key) Blue Pink 33 Blue 2 38 Green/orange Driver kick panel Not needed G35 Coupe Blue Pink 33 Blue 2 38 Green/orange Driver kick panel Not needed G35 Coupe Blue Red 33 Blue 2 38 Green/orange Driver kick panel Not needed G35 Coupe (Smart Key) Blue Pink 33 Blue 2 38 Green/orange Driver kick panel Not needed G See Vehicle-Specific Guide Not needed 49 Red or green Passenger kick panel See Vehicle-Specific Guide M See Vehicle-Specific Guide Not needed 38 White/purple Behind glove box or white/green See Vehicle-Specific Guide M See Vehicle-Specific Guide Not needed 38 White/purple Behind glove box or white/green See Vehicle-Specific Guide Q Blue Pink 14 Yellow 1 65 Green Driver kick panel Not needed Q Blue Pink 14 Red/White 1 65 Green Driver kick panel Not needed Right of steering QX Blue Pink 33 Red/Yellow 2 38 Green/Orange column Not needed Right of steering QX White Red 33 Red/Yellow 2 38 Green/Orange column Not needed Right of steering QX56 (Smart Key) Blue Pink 33 Red/Yellow 2 38 Green/Orange column 2009 & up, see page 10 *Those wires can also be found behind cluster in a 40-pin white connector, pink and blue wires are next to the other.

6 Nissan Vehicle Wiring Reference Chart Page 6 Vehicles Compatibility CAN Wires Information Autolights OFF Information Security LED Information CAN HIGH Wire CAN LOW Wire Autolight OFF at Autolight Security LED at Vehicle Years Color OBDII Pin 6 Color OBDII Pin 14 BCM Connection BCM BCM Location BCM Pin 22 BCM Pin 21 Pin Wire Color Type (p.7) Pin Wire Color IPDM-E/R Information IPDM-E/R (Relay required to prevent starter damage) Nissan 350Z Blue Pink 33 Green 2 38 Green/Orange Driver kick panel Not needed 350Z Blue Red 33 Green 2 55 Green/Orange Driver kick panel Not needed 370Z See Vehicle-Specific Guide Not needed 49 Yellow Passenger kick panel See Vehicle-Specific Guide Altima See Vehicle-Specific Guide Not needed 49 Blue/Orange Over steering column See Vehicle-Specific Guide Altima Blue Pink 33 Green/Yellow 2 38 Green/Orange Left of steering column Not needed Armada Blue Pink 33 Red/Yellow 2 38 Green/Orange Right of steering column Not needed Armada 2004 White Red 33 Red/Yellow 2 38 Green/orange Right of steering column Not needed Armada (Smart Key) Blue Pink 33 Red/Yellow 2 38 Green/orange Right of steering column 2009 & up, see page 8 Cube Blue Pink Not needed 38 Red/Yellow Left of steering column See page 9 Frontier Blue Pink Not needed 38 Green Right of steering column 2009 & up, see page 10 GT-R Blue Pink Not needed 49 Green Passenger kick panel Not needed Maxima See Vehicle-Specific Guide Not needed 49 Blue/Orange Over steering column See Vehicle-Specific Guide Maxima Blue Pink 33 Green/Yellow 1 38 Green/Orange Left of steering column Not needed Maxima 2004 Blue Yellow 33 Green/Yellow 1 38 Green/Orange Left of steering column Not needed Murano See Vehicle-Specific Guide Not needed 49 Orange Over steering column See Vehicle-Specific Guide Murano Blue Yellow 33 Green/Yellow 1 38 Green/orange Right of steering column Not needed Murano 2003 Blue Yellow 33 Green/Yellow 1 55 Green/orange Right of steering column Not needed Murano (Smart Key) Blue Yellow 33 Green/Yellow 1 38 Green/orange Right of steering column Not needed NAVARA Blue Pink 23 Green Right of steering column 2009 & up, see page 10 Pathfinder Blue Pink 33 Gray 1 38 Green Right of steering column 2009 & up, see page 10 Pathfinder (Smart Key) Blue Pink 33 Gray 1 38 Green Right of steering column 2009 & up, see page 10 QASHQAI** Blue Pink 23 Light Blue Behind glove box Not needed Behind center upper Quest Blue Pink 33 Red/Yellow 1 38 Green/Orange dash triangular cover Not needed Behind center upper Quest 2004 Blue Yellow 33 Red/Yellow 1 38 Green/Orange dash triangular cover Not needed Rogue Blue Pink Not needed 38 Black Behind glove box 2009 & up, see page 8 Rogue (Smart Key)** Blue Pink Not needed 23 Black Behind glove box 2009 & up, see page 8 Sentra Blue* Pink* Not needed 38 Light Blue Over steering column 2009 & up, see page 8 Sentra (Smart Key) Blue* Pink* Not needed 38 Light Blue Over steering column 2009 & up, see page 8 Titan Blue Pink 33 Gray 2 38 Green/Orange Right of steering column Not needed Titan 2004 White Red 33 Green/Yellow 1 38 Green/Orange Right of steering column Not needed Versa Blue Pink Not needed 38 Red Behind glove box 2009 & up, see page 8 Versa (Smart Key) Blue Pink Not needed 38 Red Behind glove box 2009 & up, see page 8 Xterra Blue Pink Not needed 38 Green Right of steering column Not needed X-Trail** Blue Pink 23 Violet Behind glove box Not needed Suzuki Equator Blue Pink Not needed 38 Green Right of steering column 2009 & up, see page 10 *Those wires can also be found behind cluster in a 40-pin white connector, pink and blue wires are next to the other. ** For Nissan Rogue (Smart-Key), X-Trail (Smart Key) & Qashqai (Smart Key) see Intelli-Key connection on page 7.

7 Auto Headlamp Shutoff Connection Types See Wiring Reference Chart on pages 5&6. Page 7 TYPE 1 Relay pin 30 Cut Relay pin 87a Auto Headlamp wire at the vehicle See Wiring Reference Chart, pages 5& 6 (+) 12v a pin 2 of 12-pin conn: Green/Black TYPE 2 Connector diagram for all vehicles (except Infiniti Q45) Connector diagram for Infiniti Q45 Wire Side View of BCM pin 2 of 12-pin conn: Green/Black pin 2 of 12-pin conn: Green/Black Auto Headlamp wire at the vehicle See Wiring Reference Chart, pages 5& 6 Auto Headlamp wire at the vehicle See Wiring Reference Chart, pages 5& 6 Intelli-Key connections Nissan Rogue (Smart Key), Nissan X-trail (Smart Key), Nissan Qashqai (Smart Key) Connector at Intelli-Key Unit (Wire side view) Left of steering column, behind mirror controls White DBALL pin 8, 14-pin conn.: Yellow Intelli-Key Unit Ignition Input (Key side) To BCM DBALL pin 9, 14-pin conn.: Orange Intelli-Key Unit Ignition Input (BCM Side)

8 IPDM-E/R Wiring: Nissan Armada, Rogue, Sentra & Versa Page 8 Component Location in the Vehicle The IPDM-E/R wiring is located in the driver-side engine box. Automatic Transmission (+) Starter 2 This relay is REQUIRED in the installation to avoid permanent damage to the remote starter. It also EXTREMELY IMPORTANT to protect the relay from water exposure. Neutral a 30 (-) Ground (+) Starter 1 Voltage Test (Using a Multimeter) Three (3) available stages: Key (OFF): 0 volt. Key (ON) + Transmission (Park): 12 volts. Key (ON) + Transmission (Drive): 0 volt. Manual Transmission (+) Starter 1 Starter Remote Vehicles Starter 1 Starter 2 Neutral Nissan Armada White/Red Brown Black/Red Rogue Orange Red Yellow Sentra White White/Red Brown/Red Versa Red White Brown

9 IPDM-E/R Wiring: Nissan Cube, Navara Page 9 Component Location in the Vehicle The IPDM-E/R wiring is located in the driver-side engine box. Automatic Transmission (+) Starter 2 This relay is REQUIRED in the installation to avoid permanent damage to the remote starter. It also EXTREMELY IMPORTANT to protect the relay from water exposure. Neutral a 30 (-) Ground Fuse Manual Transmission (+) Starter 1 Voltage Test (Using a Multimeter) Three (3) available stages: Key (OFF): 0 volt. Key (ON) + Transmission (Park): 12 volts. Key (ON) + Transmission (Drive): 0 volt. (+) Starter 1 Starter Remote Fuse Vehicles Starter 1 Starter 2 Neutral Nissan Cube Brown Light Blue Brown

10 IPDM-E/R Wiring: Infiniti QX56, Nissan Frontier & Pathfinder, Suzuki Equator Component Location in the Vehicle The IPDM-E/R wiring is located in the driver-side engine box. Automatic Transmission Page 10 (+) Starter 2 This relay is REQUIRED in the installation to avoid permanent damage to the remote starter. It also EXTREMELY IMPORTANT to protect the relay from water exposure. Neutral a 30 (-) Ground (+) Starter 1 Voltage Test (Using a Multimeter) Three (3) available stages: Key (OFF): 0 volt. Key (ON) + Transmission (Park): 12 volts. Key (ON) + Transmission (Drive): 0 volt. Manual Transmission (+) Starter 1 Starter Remote Vehicles Starter 1 Starter 2 Neutral Infiniti QX56 White/Red Brown Black/Red Nissan Frontier Gray White Red Navara Gray White Brown Pathfinder (US) White Gray Red Pathfinder (EU) Gray White Brown Suzuki Equator Gray White Red

11 Locating the IPDM-E/R in the Vehicle Page 11 Refer to pages 5 and 6 for the Vehicle Wiring Reference Chart to determine which colors correspond to your vehicle, as they may vary. Under the Hood - Passenger Side IPDM-E/R or Starter 1&2 Neutral Under the Hood - Driver Side IPDM-E/R Starter 1&2 Neutral

12 Module Programming Page 12 Refer to the LED Diagnostics section on page 13 for more information and for troubleshooting purposes. 1 If connected in D2D: Connect the 4-pin D2D and the 20-pin harnesses. If connected in W2W: Connect the 20-pin harness. Caution! The 20-pin connector can be easily plugged in backwards. 4-pin 20-pin The LED turns ON solid. On Solid 2 Connect the 4-pin Relay Pack harness. 4-pin Turn Insert the key into the ignition barrel and turn it to the IGN position. If the module has not been programmed, the LED flashes throughout the process. This can take up to 15 seconds. If the module is programmed, the LED turns OFF when the ignition is turned ON. The LED turns ON solid for 1 second, then turns OFF once the module has been successfully programmed. the key to the OFF position and remove it from the ignition barrel. KEY OFF IGN START & KeyatIGN Flashes On 1 Sec KEY & OFF Off IGN Remove Key START Module Reset 1 Press and hold the Programming button and plug in the module. The LED flashes quickly. Press & Hold & On Solid 2 Once the LED turns ON, release the Programming button. The module reset is complete. Off & Release

13 LED Diagnostics Page 13 LED Status Description Troubleshooting Powering Up x1 Off Module Programming Module has no power. Flashes once quickly Modules was reset. Normal operation. Make sure the D2D harness is connected or the 12V is present between the red and black wires. Solid Module not programmed. Insert and turn the key to the ON position. Flashes quickly Ignition detected. Normal operation. Solid for 1 second & and then off Active Ground While Running x1 sec Solid Off Flashes for 1 second Flashes Inactive Ground While Running x1 sec Off Flashes for 1 second Solid Flashes Module programmed. Incorrect behavior. Ground while running (status) off. A command is processing. Ground while running (status) on. Ground while running (status) is off. A command is processing. Incorrect behavior. Ground while running (status) on. Normal operation. Data is not processing correctly. Disconnect the power from the module and power up. Make sure the module was programmed, i.e. the D2D harness is properly connected or the ground while running (status) wire is connected (if in W2W mode). Normal operation. Normal operation. Normal operation. Normal operation. Data is not processing correctly. Disconnect the power from the module and power up. Module did not receive ground while running (status) off. Make sure the D2D harness is properly connected or the ground while running (status) wire is not shorted to ground.

14 Limited One-Year Consumer Warranty Page 14 For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. ( DIRECTED ) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the Part ), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer s name, address, telephone number, the authorized licensed dealer s name and complete product and Part description. This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED S OPTION THE PART AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only. PROTECTED BY U.S. PATENTS: 5,719,551; 6,011,460 B1 *;6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7, 046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; CDN.PATENT: 2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2, 420, 947; 2,426,670; 2,454,089 EUROPEAN PATENT: 1,053,128 PAT.PENDING: 2,291,306; MADE IN CANADA