Huawei Enterprise Access Products Quick Reference Guide

Huawei Enterprise Access Products Quick Reference Guide -01 7-02 -04-06 -08-10 -11-12 -13 of the Access UA5000 Series DSLAM Series xpon series - OLT xpon Series - MDU xpon Series - ONT xpon Series - ONU (Power) xpon Series - EOC xpon Series - ODN

of the Access With the development of the telecommunication technologies and the improvement on the quality of life, common users propose new service requirements, and increasingly require high-speed data and multimedia services apart from the legacy voice service. To meet such requirements of users, the access network (AN) device must provide powerful capability of integrated services. In addition, networks are evolving with each passing day, for example, from PSTN to NGN/IMS and FTTx. This also requires the AN device to be future-proof. Huawei FTTx solution provides access solutions for different application scenarios of custom, for example, smart Grid solution for the Power, dual direction migration solution for the Broadcast, access network of the railway, high-way, airport, etc. Cooperate with other product, Huawei FTTx solution also provides Intelligent Building, Smart Zone solutions. Network Topology FTTO PBX E1/POST Leased Line TDM AP FE/GE FE FE SBU SBU MDU Splitter OLT E1/STM-1 10GE SDH IP PSTN/3G ROUTER Internet/3G FTTB FE ONU FTTC FE ONT FTTH PC POTS Solution Features Access and aggregation integrated, helps to simplify network architecture, to lower TCO essentially. Unified platform with multiple technologies: xpon / P2P / DSL / POTS. Smooth network evolution solution extends AN' lifecycle and reduces TCO. Access 7-01

UA5000 Series To meet the customer and market requirements, Huawei launches the UA5000, which has a perfect and mature system design, and features flexible networking, abundant service, and powerful functions. The UA5000 complies with the RoHS directive, supports the seamless evolution from PSTN to NGN or IMS, and also supports the upstream PON networking. UA5000 FO2A ONU60A_V2 Innovative 4-in-1 platform implementing smooth network evolution. Perfect inheritance of traditional services implementing seamless service migration. Powerful bandwidth providing capability increasing the revenue. Unique designs of the COMBO board and 64-port POTS board saving the TCO. Perfect line assurance solution ensuring the O&M and user experience. 7-02 Access

Comparison Between UA5000 Series Products parameters UA5000 F02A ONU60A_V2 Dimensions (W D H)) All kind of shelf 600 mm 600 mm 2200 mm 436 mm 420 mm 86 mm Shelf configuration 2HABA Maximum: 5 Access service type Data, video, POTS, multi-media POTS(PSTN and IP) NNI UNI GPON/EPON GE(optical/electrical) FE(optical/electrical) POTS, ISDN-BRI, ISDN-PRI, ADSL2+, ATM G.SHDSL.bis, SHDSL, VDSL2, TDM G.SHDSL, E1,V.35/V.24, 2/4E&M, FXO GE(optical) FE(optical/electrical) POTS, ISDN Upstream protocol SIP/H.248/V5 H248/MGCP Working temperature -10 ~ +45-10 ~ +55-5 ~ +45 Working humidity 10%~90% Access 7-03

DSLAM Series MA5600/MA5603 supports non-blocking gigabit Ethernet (GE) switching fabric, backplane capacity of 210G make it easy to extend customer's system within at least 5 years. MA5600/5603 adopt HUAWEI self design software platform named VRP5.0, which have enough Layer 3 features to satisfy the different requirements for specified customers. MA5600 MA5603 Provide various network ports, service ports, and maintenance ports to meet different networking requirements. As a multi-service access platform, the MA5600 supports multiple access modes and networking modes to suit various networking scenarios in different environments and to meet different service requirements. Service switching capacity of up to 48Gbit/s, packet forwarding capability of up to 72Mbit/s, and high integration of data switching, routing, and user management. 7-04 Access

In line with security requirements for custom services, the MA5600 provides the features to ensure the security of the system and the user. The abnormality processing capacity is taken into consideration in the system, software, and hardware designs. This ensures the reliable running of the MA5600. The MA5600 supports excellent management, maintenance, and monitoring functions, and works with the N2510 line assurance system that facilitates routine maintenance and fault detection. Comparison between DSLAM Series Products Parameters MA5600 MA5603 Shelf Specifications Dimensions (W D H) 19 inches wide, front accessible 16 slots,14 service slots MA5600 service shelf (without mounting brackets): 435.4 mm 420 mm 441.8 mm MA5600 SPL shelf (without mounting brackets): 435.4 mm 420 mm 397.3 mm front accessible 7 slots, 6 service slots MA5603 shelf (without mounting brackets): 436 mm 419.2 mm 219.5 mm Shelf height 10U 5U Upstream ports GE: 1-6 FE: 1-6 optical ports; 1-4 electrical ports Backplane bus capacity 210 Gbit/s 45 Gbit/s Access service capacity ADSL2+, SHDSL, SHDSL.bis, VDSL2 ADSL2+, SHDSL, VDSL2 Maximum number of ports in a shelf ADSL2+ ports: 896 SHDSL ports: 448 VDSL2 ports: 448 ADSL2+ ports: 384 SHDSL ports: 192 VDSL2 ports: 192 Access 7-05

xpon series - OLT SmartAX MA5600T is the global first OLT which integrates the functionality of aggregation switch and edge router. It can provide high density GPON and Ethernet P2P optical access, triple-play service, TDM/ ATM/Ethernet leased line services for business customers and mobile backhaul with high reliability and high precision clock, and high density GE/10GE interfaces for cascading remote access equipments. MA5600T helps to simplify network architecture, to improve network reliability and lower TCO essentially. There are two types of frame. The large frame has 16 service slots while the middle frame (which named MA5603T) has 6 service slots. The hardware and software are all compatible between MA5600T and MA5603T. MA5600T MA5603T Access and Aggregation Integrated Large aggregation capacity, 3.2T bit/s backplane capacity,960g bit/s switch capacity, 512K MAC addresses. High density GE/10GE interfaces for cascading, up to 36*10GE or 384*GE interfaces, no need for additional investment of aggregation switches. High reliability networking support direct connection to the BRAS, ONU dual-homing to two OLTs for redundancy and hitless software upgrade function. 7-06 Access

Any Access Large capacity IPTV service provision, 8K multicast users and 4K multicast channels and 2k concurrent multicast channels. H-QoS support 3-level QoS (Different ISP/ service/user) guarantees OLT wholesale. Traditional E1 service access, Native TDM or CESoP for traditional E1 service of enterprise and mobile base station access. E2E high reliability guarantees business customers and mobile backhaul, BFD/LAG/MSTP/RRPP/Smart Link for uplink redundancy and 50ms switching time of Type B/Type C for fiber protection. E-LAN function for local traffic inter-connection, meet the requirements of enterprise and campus network. Green With Huawei self-developed GPON chipsets, the maximum power consumption of the 8-port GPON line card is only 55W. Unique energy-saving bus, the idle service card can be powered off. Comparison between OLT Series Products Parameters MA5600T MA5603T Backplane bus switching capacity 3.2Tbit/s 1.5Tbit/s System L2 packet forwarding rate Control board switching capacity SCUN: 726 Mpps (in the active/ standby mode) or 1452 Mpps (in the load balancing mode) SCUN: 480 Gbit/s (in the active/ standby mode) or 960 Gbit/s (in the load balancing mode) SCUN: 726 Mpps (in the active/ standby mode) or 1452 Mpps (in the load balancing mode) SCUN: 480 Gbit/s (in the active/ standby mode) or 960 Gbit/s (in the load balancing mode) Maximum number of upstream ports (GE ports in the GIU slot) in a shelf Maximum number of upstream ports (10GE ports in the GIU slot) in a shelf Maximum number of GPON ports in a shelf 8 8 4 4 128 48 Access 7-07

xpon Series - MDU The SmartAX MA5620/MA5626 and SmartAX MA5612 are industry-leading remote multi dwelling units (MDUs) launched by Huawei, which provide broadband services and IP voice services on the Fiber To The Building (FTTB) network for family users and small to medium enterprises. They feature broad temperature range, low power consumption, mute design, high stability, environment friendlily and energy conservation, and can be used on workbenches and installed in corridors and cabinets, facilitating installation and maintenance. MA5612 MA5621 MA5620 24 x FE + 24 x POTS MA5620 16 x FE + 16 x POTS MA5620 8 x FE + 8 x POTS MA5626 24 x FE MA5626 16 x FE MA5626 8 x FE Automatic adaptation to GPON and GE. Each of them provides two uplink ports using the small form-factor pluggable (SFP) optical modules to meet different site requirements. They fully meet requirements for pure LAN access service or voice service on an FTTB network, inherits traditional voice services, and supports migration of narrowband users. Plug-and-play (PnP) service provisioning: They allow remote issuing of configuration. A management channel and service channel are created after each of them is powered on and registers successfully. Manual onsite configuration is not required. Efficient management and maintenance: free of field software commissioning, remote acceptance, remote upgrade and patch installation, and remote fault location. Environment-friendly and energy conservation: Each of them uses a highly effective power supply system to reduce system power consumption. Each of them uses passive cooling without any fans to reduce device power consumption. Each of them uses POTS short-loop design to reduce port power consumption in short distances. 7-08 Access

Comparison between MDU Series Products Parameters MA5621 MA5631 HG7022/7042 MA5612 MA5620 MA5626 NNI 1) 2 EPON 2) 2 GPON 3) 2 GE 4) 1 GE+1 EPON 5) 1 GE+1 GPON Provide 1 RF In Provide 2 SFP and 1 GE uplink-port 2 EPON 2 GPON 2 GE 1 GE+1 GPON 1 GE+1 EPON 1 GE 1 RF In 1) 2 EPON 2) 2 GPON 3) 2 GE 4) 1 GE+1 EPON 5) 1 GE+1 GPON 1) 2 EPON 2) 2 GPON 3) 2 GE 4) 1 GE+1 EPON 5) 1 GE+1 GPON 1) 2 EPON 2) 2 GPON 3) 2 GE 4) 1 GE+1 EPON 5) 1 GE+1 GPON UNI 4 GE/ FE+4 RS485/ RS232(two RS485 serial ports and two RS232 serial ports by default, and each of the serial ports can be configured as an RS485 or RS232 serial port as required) 1-4 RF Out 1) 1 RF Out 2) HG7022:2FE 3) HG7042:4FE 1) 2 GE+6 FE 2) 2 GE+6 FE+ 16 POTS 3) 2 GE+6 FE+ 16 POTS+1 RF Service boards: EIUC board (each board provides eight FE ports),asnb board (each board provides 16 POTS ports),e81a board (each board provides eight E1 ports). 8FE+8POTS 16FE+16POTS 24FE+24POTS 24FE: 19 inch 16FE: 19 inch 8FE: 11 inch 4GE+4FE(POE): 19 inch 8FE(reverse POE): 11 inch dimensions (W D H) 180mm 235mm 44.4mm 282mm 163mm 116.5mm 170mm 110mm 28mm 19 inch 1U height: 442mm 245mm 43.6mm(without the heating board or mounting brackets) 19inch 1U height: 442mm 220mm 43.6mm (without the heating board or mounting brackets) 19inch 1U height: 442mm 220mm 43.6mm (without the heating board or mounting brackets); 11 inch 1U height: 250mm 220mm 43.6mm(without the heating board or mounting brackets) ; Heat dissipation mode No fans; passive cooling No fans; passive cooling No fans; passive cooling fans No fans; passive cooling No fans; passive cooling Power supply mode AC: 220V/110V DC: 12V/24V/48V AC: 220V/110V/60V( 60 V AC remote power supply and 220 V AC local power supply) AC: 220V/110V DC: 12V AC: 220V DC: 12V backup power: 12V AC:220V AC: 220V,reverse POE power supply(8 FE) VoIP / / / H.248/SIP H.248/SIP / Access 7-09

xpon Series - ONT Huawei provides a series of ONT products for various FTTH scenarios, which are based on the uniform platform. By using the GPON/EPON technology, VoIP, Internet, Wi-Fi and HD video services are provided for home and SOHO users. HG8010 HG8110 HG8240 HG8245 HG8247 Plug and play. Remote diagnosis. Batch method of upgrade. High speed forwarding. Green energy-saving. Comparison between ONT Series Products Performance parameters HG8010 HG8110 HG8240 HG8245 HG8247 Dimensions(W D H) 143 mm 115 mm 30 mm 143 mm 115 mm 30 mm 195 mm 155 mm 34 mm 195 mm 174 mm 34 mm 268 mm 213 mm 34 mm Interface type 1GE 1POTS+1GE 2POTS + 4GE 2POTS + 4GE + 1USB + WiFi 2POTS + 4GE + 1USB + WiFi + 1RF Average power consumption 5.5 W 7 W 7.5 W 8 W 11 W Power supply Adapter input: 100 240 V AC, 50 60Hz; Adapter input: 100 240 V AC, 50 60Hz Adapter input: 100-240 V AC, 50-60 Hz Adapter input: 100-240 V AC, 50-60 Hz Adapter input: 100-240 V AC, 50-60 Hz Adapter output: 11 14 V DC, 1 A Adapter output: 11 14 V DC, 1 A Adapter output: 11-14 V DC, 1 A Adapter output: 11-14 V DC, 2 A Adapter output: 11-14 V DC, 2 A Weight (not include adapter) About 400g About 400g About 500g About 550g About 800g 7-10 Access

xpon Series - ONU (Power) The SmartAX MA5621 (MA5621 for short) is the first multi-dwelling unit (MDU) specifically designed for smart grid telecommunication in the industry, which supports natural heat dissipation and provides 2*GE/2*GPON uplink ports and 4*GE/FE+4*RS232 user ports. The MA5621 allows terminal units to remotely collect and transmit required information, for example, to remotely control the power, monitor environment safety, and read meters for billing. The MA5621 also can be used for video monitor services. The MA5621 features a broad temperature range, broad voltage range, low-power consumption, and high stability, and can be used on workbenches and installed in corridors and cabinets. MA5621 Automatic adaptation to GPON and GE modes: The MA5621 provides two uplink ports that use the small form-factor pluggable (SFP) optical modules to meet different site requirements. Hand-in-hand PON protection. Sealed casting aluminum shell and natural heat dissipation (waterproof, dust-proof, and corrosion-proof). Auto-adaptive GE/FE electrical ports and configurable RS232 serial ports, reducing the number of maintenance times. Support for 6 kv surge protection capability, applying to thunderous and rainy areas. Support for the working temperature ranging from -40 o C to +85 o C, meeting extreme weather conditions. Auto-adaptive 9-60 V direct current (DC) input and 90-290 V alternating current (AC) input, facilitating installation. Unified network management and plug-and-play: free of field software commissioning, remote acceptance, remote upgrade and patch installation, and remote fault location. Access 7-11

xpon Series - EOC The MA5631 is mainly used in a passive optical network (PON)+EoC (opticable for short) network. The MA5631 provides gigabit PON (GPON), and gigabit Ethernet (GE) upstream modes to flexibly choose from, and supports one to four-channel radio frequency (RF) input in the upstream direction and one to fourchannel RF output in the downstream direction. Supporting a valid bandwidth of currently 280 Mbit/s (at the MAC layer) and future 1 Gbit/s, the MA5631 can meet users' requirements for bandwidth-hungry services. The EchoLife HG7022 EoC (HG7022) and EchoLife HG7042 EoC (HG7042) are indoor EoC terminals tailored for home and SOHO (Small Office Home Office) users. HG7022/HG7042 both models are designed for Homeplug AV standard cable network. Broadband data are input via CATV cables. Then Ethernet and CATV data are separated to provide both video and data services at the same time. The built-in duplex filter has no influence on CATV signals. MA5631 HG7022/HG7042 Device integration: first ONU and EoC headend integrated product in the industry, saving optical node space. Unified NE: ONU and EoC headend using the same IP address, saving network resources. Centralized NMS: a centralized NMS managing PON and EoC devices, reducing O&M costs. High reliability: Supports dual uplinks and ring networks. High bandwidth: Supports 300 Mbit/s service rate and 2.5 Gbit/s backplane bus rate. 7-12 Access

xpon Series - ODN The optical distribution network (ODN) is an indispensable path for transmitting FTTx data and directly affects the performance, reliability, and scalability of an FTTx system. Huawei provides a comprehensive series of ODN products to deliver fast ODN customization services to carriers worldwide. Full-series Series Product Product Series and Uniform Platform Box ODF FDT Outdoor FAT Indoor FAT Closure ATB Optical Cable Buried Duct Aerial Air-blown Indoor multi-core Drop cable Optical Splitter Bare Splitter Bare Splitter Module Splitter Unit Splitter Pigtail, Patchcord and Connector Pigtail` Patch cord Adapter and other Best Economic: Huawei provides a comprehensive series of ODN products, the consultant-assisted project consultancy service, and the optimal network planning scheme. By comprehensively analyzing the feasibility of an ODN project, Huawei provides a best economic ODN solution for customer. Page 1 Fast Deployment: Based on rich engineering experience, Huawei concentrates efforts into engineering efficiency improvement by optimizing product design and engineering technologies to achieve fast FTTH deployment. Easy Management (iodn): iodn is endowed with multiple intelligence functions, such as automatically identifying and managing optical fiber connections, intelligently indicating optical fiber connection operations, and intelligently managing optical splitters. Using iodn, customer can automatically find out the target optical fiber and appropriately operate it, paving the way for massive FTTH rollouts. Access 7-13