NAVY TRAINING SYSTEM PLAN FOR THE NAVAIR AVIATION SPECIAL SKILLS TRAINING PROGRAM N78-NTSP-A-50-0010/A FEBRUARY 2002
N78-NTSP-A-50-0010/A February 2002 NAVAIR AVIATION SPECIAL SKILLS TRAINING PROGRAM EXECUTIVE SUMMARY Naval Air Systems Command (NAVAIR) Special Skills Training has been available since the 1970s and is currently available at four Naval training sites around the country. Two Naval Aviation Depots (NADEP) on the East Coast are located at Naval Air Station (NAS) Jacksonville, Florida, and Marine Corps Air Station Cherry Point, North Carolina. A third East Coast training site is located at the Norfolk Naval Shipyard in Portsmouth, Virginia. One NADEP on the West Coast is located at NAS North Island, California. NAVAIR Aviation Special Skills Training is performed by civilian Wage Grade Lead Instructor personnel assigned to the various activities and is available to active duty and reserve military personnel from the United States Navy, Marine Corps, Air Force, and Army. Students are assigned by their respective detailers, or a classroom quota can be requested directly from the training activity. The courses are primarily established for the use of Naval Aviation Fleet maintenance personnel. However, they may be utilized by other Department of Defense (DoD) personnel on a space available basis with no instructional cost to the user. Inputs from other DoD agencies beyond space available or requiring additional resources will be accepted subject to prior arrangement for inter-service support. Instructor manpower for these four training sites is currently in place and there is no requirement for this manpower to change. Historically, training equipment procurement, replacement, and upgrade requirements have been issues. Equipment has been borrowed, and in some cases, has been in short supply, which has significantly impacted the quality of training. The current plan is to provide all required equipment to each training activity to ensure quality training is available. This is the first Navy Training System Plan (NTSP) for the NAVAIR Aviation Special Skills Training Program and updates to this NTSP will track progress in attaining the required equipment. i
N78-NTSP-A-50-0010/A February 2002 NAVAIR AVIATION SPECIAL SKILLS TRAINING PROGRAM TABLE OF CONTENTS Executive Summary... List of Acronyms... Preface... Page i iii vi PART I - TECHNICAL PROGRAM DATA A. Nomenclature-Title-Program... I-1 B. Security Classification... I-1 C. Manpower, Personnel, and Training Principals... I-1 D. System Description... I-1 E. Developmental Test and Operational Test... I-2 F. Aircraft and/or Equipment/System/Subsystem Replaced... I-2 G. Description of New Development... I-2 H. Concepts... I-2 1. Operational... I-2 2. Maintenance... I-2 3. Manning... I-2 4. Training... I-2 I. Onboard (In-Service) Training... I-12 J. Logistics Support... I-13 K. Schedules... I-14 L. Government-Furnished Equipment and Contractor-Furnished Equipment Training Requirements... I-15 M. Related NTSPs and Other Applicable Documents... I-15 PART II - BILLET AND PERSONNEL REQUIREMENTS... II-1 PART III - TRAINING REQUIREMENTS... PART IV - TRAINING LOGISTICS SUPPORT REQUIREMENTS... PART V - MPT MILESTONES... V-1 PART VI - DECISION ITEMS/ACTION REQUIRED... PART VII -POINTS OF CONTACT... III-1 IV-1 VI-1 VII-1 ii
N78-NTSP-A-50-0010/A February 2002 NAVAIR AVIATION SPECIAL SKILLS TRAINING PROGRAM LIST OF ACRONYMS ACDU AIMD AM AMTCS AOB AR AS ASM ATIR CAI CFE CFY CIN CMC CMI CNET CNO COTS DCIVN DoD ECR ETJ FMS FTD FY GFE GMAW GPETE GPTE ICW Active Duty Aircraft Intermediate Maintenance Department Aviation Structural Mechanic Aviation Maintenance Training Continuum System Average Onboard Active Reserve (USMC) Aviation Support Equipment Technician AMTCS Software Module Annual Training Input Requirement Computer-Aided Instruction Contractor Furnished Equipment Current Fiscal Year Course Identification Number Commandant of the Marine Corps Computer-Managed Instruction Chief of Naval Education and Training Chief of Naval Operations Commercial Off-The-Shelf Department of Defense Civilian Department of Defense Electronic Classroom Electronic Training Jacket Foreign Military Sales Fleet Training Device Fiscal Year Government Furnished Equipment Gas Metal Arc Welding General Purpose Electronic Test Equipment General Purpose Test Equipment Interactive Courseware iii
N78-NTSP-A-50-0010/A February 2002 NAVAIR AVIATION SPECIAL SKILLS TRAINING PROGRAM LIST OF ACRONYMS IMI LRC MATMEP MCAS MCCDC MOS MTIP MTL NA NADEP NAMP NAMTRAGRU DET NAMTRAU NAS NAVAIR NAVAIRINST NAVAIRSYSCOM NDI NEC NTSP OPO OPNAV OPNAVINST PC PDA PFY PMA RFT SELRES SPETE Interactive Multimedia Instruction Learning Resource Center Maintenance Training Management and Evaluation Program Marine Corps Air Station Marine Corps Combat Development Command Military Occupational Specialty Maintenance Training Improvement Program Master Task List Not Applicable Naval Aviation Depot Naval Aviation Maintenance Program Naval Air Maintenance Training Group Detachment Naval Air Maintenance Training Unit Naval Air Station Naval Air Systems Command Naval Air Systems Command Instruction Naval Air Systems Command Non-Destructive Inspection Navy Enlisted Classification Navy Training System Plan OPNAV Principal Official Office of the Chief of Naval Operations Office of the Chief of Naval Operations Instruction Personal Computer Principal Developing Agency Previous Fiscal Year Program Manager, Air Ready For Training Selected Reserve Special Purpose Electronic Test Equipment iv
N78-NTSP-A-50-0010/A February 2002 NAVAIR AVIATION SPECIAL SKILLS TRAINING PROGRAM LIST OF ACRONYMS SPTE ST TAR TD TEV TSA TTE USMC USN Special Purpose Test Equipment Special Tool Training and Administration of the Naval Reserve Training Device Test and Evaluation Training Support Agency Technical Training Equipment United States Marine Corps United States Navy v
N78-NTSP-A-50-0010/A February 2002 NAVAIR AVIATION SPECIAL SKILLS TRAINING PROGRAM PREFACE This Approved Navy Training System Plan (NTSP) updates the Draft NTSP, N78-NTSP- A-50-0010/D, dated July 2001. The Naval Air Systems Command (NAVAIR) Aviation Special Skills Training Program has been available for 30 years, but no NTSP was ever written. All of the requirements of the NAVAIR Aviation Special Skills Training Program have been identified and all required manpower and training are currently in place. This NTSP was written to document those requirements and identify current training equipment shortfalls. This NTSP has been written to comply with guidelines set forth in the Navy Training Requirements Documentation Manual, Office of the Chief of Naval Operations (OPNAV) Publication P-751-1-9-97. vi
PART I - TECHNICAL PROGRAM DATA N78-NTSP-A-50-0010/A February 2002 A. NOMENCLATURE-TITLE-PROGRAM 1. Nomenclature-Title-Acronym. NAVAIR Aviation Special Skills Training Program 2. Program Element. Not Assigned B. SECURITY CLASSIFICATION 1. System Characteristics... Unclassified 2. Capabilities... Unclassified 3. Functions... Unclassified C. MANPOWER, PERSONNEL, AND TRAINING PRINCIPALS OPNAV Principal Official (OPO) Program Sponsor... CNO (N789) OPO Resource Sponsor... CNO (N781) Developing Agency... NAVAIRSYSCOM (PMA205) Training Agency... NAVAIRSYSCOM (PMA205) Training Support Agency... NAVAIRSYSCOM (PMA205) Curriculum Control Authority...NAVAIRSYSCOM (AIR 3.4.6) Marine Corps Force Structure...MCCDC (C53) D. SYSTEM DESCRIPTION 1. Operational Uses. The purpose of the NAVAIR Aviation Special Skills Training Program is to provide adequate numbers of personnel in the Navy, Marine Corps, Army, and Air Force with the capabilities provided by this training. 2. Foreign Military Sales. Training of foreign military maintenance personnel may be accomplished when arranged and funded in accordance with instructions governing Foreign Military Sales (FMS). I-1
E. DEVELOPMENTAL TEST AND OPERATIONAL TEST. Not Applicable (NA) F. AIRCRAFT AND/OR EQUIPMENT/SYSTEM/SUBSYSTEM REPLACED. NA G. DESCRIPTION OF NEW DEVELOPMENT 1. Functional Description. Naval Air Systems Command Instruction (NAVAIRINST) 1500.2 series establishes policy and procedures for providing training courses for the special skills training of aviation maintenance fleet and shore-based personnel. Under the management of Naval Air Systems Command (NAVAIRSYSCOM) AIR 3.4.6, these courses provide supplemental training, but do not duplicate courses available at Naval Aviation Maintenance Training Group Detachments (NAMTRAGRU DET), Naval Aviation Maintenance Training Units (NAMTRAU), Fleet Readiness Squadrons, and other designated maintenance training organizations. Since this is essentially a training program, its functional description is more thoroughly developed in paragraph H.4, Training Concept, below. 2. Physical Description. NA 3. New Development Introduction. NA 4. Significant Interfaces. NA 5. New Features, Configurations, or Material. NA H. CONCEPTS 1. Operational Concept. NA 2. Maintenance Concept. NA 3. Manning Concept. Instructor manpower for the NAVAIR Aviation Special Skills Training Program is available from the four participating training activities. Instructor personnel are chosen from civilian Department of Defense (DoD) Wage Grade Lead Instructor personnel. These are senior, highly knowledgeable and skilled individuals from each area of expertise at each training activity. All Instructor personnel have attended Instructor Training and are qualified to instruct. 4. Training Concept. Training for the NAVAIR Aviation Special Skills Training Program is available upon request from the applicable training activity or through the Aviation Maintenance Detailers. All training courses are not available at every training activity. Refer to Schedules (paragraph K.1 of this document) for a complete listing of available Aviation Special Skills Training. a. Initial Training. NA I-2
b. Follow-on Training. Follow-on training for the NAVAIR Aviation Special Skills Training Program is provided by four training activities across the country. On the East Coast, training is provided by three activities: Norfolk Naval Shipyard, Portsmouth, Virginia Naval Aviation Depot (NADEP) Cherry Point, North Carolina NADEP Jacksonville, Florida On the West Coast training is provided by: NADEP North Island, California Class quotas are controlled by Aviation Ratings Detailers and by the particular training activity. Seats are set aside for both methods of scheduling. The courses are primarily established for the use of Naval Aviation Fleet maintenance personnel. They may be provided to other DoD personnel on a space available basis at no cost to the user. Inputs from other DoD agencies beyond space available or requiring additional instructional resources will be accepted subject to prior arrangement for inter-service support. The individual NAVAIR Aviation Special Skills Training courses are listed as follows: Title... CIN... Non-Destructive Inspection Technician Recertification N-701-0005 Model Manager... NAVAIRSYSCOM, AIR 3.4.6 Description... Locations... This course provides the Non-Destructive Inspection (NDI) Technician with re-certification through a review of: NDI Theory NDI Practical Application of Liquid Penetrant Magnetic Particle Inspection Eddy Current Testing Ultrasonic Testing Radiography Inspection Applicable Publications, including the Naval Aviation Maintenance Program (NAMP), Office of the Chief of Naval Operations Instruction (OPNAVINST) 4790.2 series Upon completion, the student will be re-certified to perform as an NDI Technician at the organizational and intermediate levels of maintenance. Norfolk Naval Shipyard NADEP Cherry Point NADEP Jacksonville NADEP North Island I-3
Length... RFT date... Skill identifier... TTE/TD... 12 days Currently available NA Technical Training Equipment (TTE) is listed in element IV.A.1. There are no Training Devices (TD). Prerequisite... Senior Aviation Structural Mechanic (AM) 7225 or United States Marine Corps (USMC) Military Occupational Specialty (MOS) 6044 Title... CIN... Non-Destructive Inspection Technician Specific Task N-701-0006 Model Manager... NAVAIRSYSCOM, AIR 3.4.6 Description... Locations... Length... RFT date... This course provide the NDI Technician with recertification through a review of: NDI Theory NDI Practical Application of Liquid Penetrant Magnetic Particle Inspection Eddy Current Testing Ultrasonic Testing Radiography Inspection Applicable Publications, including the NAMP Upon completion, the student will be certified to perform as an experienced NDI Technician at the organizational and intermediate levels of maintenance. Norfolk Naval Shipyard NADEP Cherry Point NADEP Jacksonville NADEP North Island 1 day Currently available Skill identifier... Senior AM 7225 or USMC MOS 6044 TTE/TD... Prerequisite... TTE is listed in element IV.A.1. TD is NA. Must be approved by Aircraft Controlling Custodian I-4
Title... CIN... Aircraft/Support Equipment Basic Welding Certification N-701-0007 Model Manager... NAVAIRSYSCOM, AIR 3.4.6 Description... Locations... Length... RFT date... Skill identifier... TTE/TD... This course provides formal training, practical instruction, and certification in: Metallurgical Properties Physical Properties Mechanical Properties Basic Welding Using the Gas Tungsten Arc Welding Process on Aluminum Alloys Steel Alloys Precipitating Hardening Nickel Based Alloys Upon completion, the student will be certified to do basic welding at the organizational and intermediate levels of maintenance. Norfolk Naval Shipyard NADEP Cherry Point NADEP Jacksonville NADEP North Island 54 days Currently available Senior AM Senior Aviation Support Equipment Technician (AS) MOS 6043 TTE is listed in element IV.A.1. TD is NA. Prerequisites... United States Navy (USN): 12 months in rate training, E- 4 through E-6 USMC: 12 months in MOS training, E-3 through E-7 I-5
Title... CIN... Aircraft/Support Equipment Basic Welding Recertification N-701-0008 Model Manager... NAVAIRSYSCOM, AIR 3.4.6 Description... Locations... Length... RFT date... Skill identifier... TTE/TD... Prerequisites... This course provides formal training, practical instruction, and certification in: Metallurgical Properties Physical Properties Mechanical Properties Basic Welding using the Gas Tungsten Arc Welding Process on Aluminum Alloys Steel Alloys Precipitating Hardening Nickel Based Alloys Upon completion, the student will be re-certified to perform Basic Welding at the organizational and intermediate levels of maintenance. Norfolk Naval Shipyard NADEP Cherry Point NADEP Jacksonville NADEP North Island 5 days Currently available NA TTE is listed in element IV.A.1. TD is NA. N-701-0007, Aircraft Support Equipment Basic Welding Must possess a current welding certificate in the appropriate category I-6
Title... CIN... Oxyfuel/Shielded Metal Arc Welder Certification N-701-0009 Model Manager... NAVAIRSYSCOM, AIR 3.4.6 Description... Locations... Length... RFT date... This course provides formal training, practical instruction, and certification in Oxyfuel and Shielded Metal Arc Welding using: Oxyfuel Welding Process Shielded Metal Arc Welding Process Silver Brazing Process Proper Metal Preparation Upon completion, the student will be certified to perform Oxyfuel and Shielded Metal Arc Welding at the organizational and intermediate levels of maintenance. Norfolk Naval Shipyard NADEP Cherry Point NADEP Jacksonville NADEP North Island 19 days Currently available Skill identifier... Senior AS 7222 Senior AM 7222 Senior Hull Technician 7222 Senior Machinery Repairman 7222 MOS 6043 TTE/TD... TTE is listed in element IV.A.1. TD is NA. Prerequisites... USN: 12 months in rate training, E-4 through E-6 USMC: 12 months in MOS training, E-3 through E-7 I-7
Title... CIN... Oxyfuel/Shielded Metal Arc Welder Recertification N-701-0010 Model Manager... NAVAIRSYSCOM, AIR 3.4.6 Description... Locations... Length... RFT date... Skill identifier... TTE/TD... Prerequisite... This course provides formal training, practical instruction, and recertification in Oxyfuel and Shielded Metal Arc Welding using: Oxyfuel Welding Process Shielded Metal Arc Welding Process Silver Brazing Process Proper Metal Preparation Upon completion, the student will be re-certified to perform Oxyfuel and Shielded Metal Arc Welding at the organizational and intermediate levels of maintenance. Norfolk Naval Shipyard NADEP Cherry Point NADEP Jacksonville NADEP North Island 5 days Currently available NA TTE is listed in element IV.A.1. TD is NA. N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification Must possess a current welding certificate in the appropriate category I-8
Title... CIN... Aircraft Corrosion Control N-701-0013 Model Manager... NAVAIRSYSCOM, AIR 3.4.6 Description... Locations... Length... RFT date... Skill identifier... TTE/TD... Prerequisite... This course provides knowledge and understanding of the methods, techniques, and procedures for: Corrosion Detection Corrosion Identification Corrosion Treatment Corrosion Prevention Proper Use of Tools, Equipment, and Materials Application of Paints, Sealants, and Preservatives Upon completion, the student will be able to perform as a Corrosion Control Team Member. NADEP Cherry Point NADEP Jacksonville NADEP North Island 5 days Currently available NA TTE is listed in element IV.A.1. TD is NA. Any Aviation Maintenance Rating Completed A School after April 1992 Or C-600-3180, General Corrosion Control I-9
Title... CIN... Aircraft Paint Touch Up and Markings N-701-0014 Model Manager... NAVAIRSYSCOM, AIR 3.4.6 Description... Locations... Length... RFT date... Skill identifier... TTE/TD... Prerequisite... This course provides formal training and practical experience in the methods and techniques of aircraft painting, including: Aircraft Paint Inspection Aircraft Paint Repair Aircraft Paint Refinishing Applying Primers, Decals, and Stencils Layout and Application of Aircraft Markings and Insignia Painting Safety Factors Paint Storage Upon completion, the student will be capable of performing aircraft painting and applying markings at the organizational level of maintenance. NADEP Cherry Point NADEP Jacksonville NADEP North Island 12 days Currently available NA TTE is listed in element IV.A.1. TD is NA. AM or AS N-701-0013, Aircraft Corrosion Control or C-600-3183, Aircraft Corrosion Control I-10
Title... CIN... Gas Metal Arc Welding Certification N-701-0025 Model Manager... NAVAIRSYSCOM, AIR 3.4.6 Description... Locations... Length... RFT date... Skill identifier... TTE/TD... This course provides formal training, practical instruction, and certification in Gas Metal Arc Welding (GMAW) including: The Fundamentals of GMAW The GMAW Process The Physical Properties of GMAW Equipment The Mechanical Properties of GMAW Equipment Repair Requirements and Limits GMAW Procedures and Techniques Safety Requirements Applicable Publications Upon completion, the student will be certified to perform GMAW at the organizational and intermediate levels of maintenance. NADEP Cherry Point NADEP North Island 19 days Currently available NA TTE is listed in element IV.A.1. TD is NA. Prerequisite... USN: 12 months in rate training, E-4 through E-6 USMC: 12 months in MOS training, E-3 through E-7 c. Student Profiles SKILL IDENTIFIER MOS 6043 PREREQUISITE SKILL AND KNOWLEDGE REQUIREMENTS D/E-603-4007, Airframes Intermediate Maintenance C-603-0176, Aviation Structural Mechanic (Structures Hydraulics) Intermediate Level Strand Class A1 C-603-0175, Aviation Structural Mechanic (Structures Hydraulics) Class A1 I-11
SKILL IDENTIFIER MOS 6044 AS AM 7222 AM 7225 PREREQUISITE SKILL AND KNOWLEDGE REQUIREMENTS D/E-603-4007, Airframes Intermediate Maintenance C-603-3191, Naval Aircraft Non-Destructive Inspection Technician Class C1 C-603-0176, Aviation Structural Mechanic (Structures Hydraulics) Intermediate Level Strand Class A1 C-603-0175, Aviation Structural Mechanic (Structures Hydraulics) Class A1 C-602-2026, Aviation Support Equipment Technician Class A1 D/E-603-4007, Airframes Intermediate Maintenance C-603-0176, Aviation Structural Mechanic (Structures Hydraulics) Intermediate Level Strand Class A1 C-603-0175, Aviation Structural Mechanic (Structures Hydraulics) Class A1 D/E-603-4007, Airframes Intermediate Maintenance C-603-3191, Naval Aircraft Non-Destructive Inspection Technician Class C1 C-603-0176, Aviation Structural Mechanic (Structures Hydraulics) Intermediate Level Strand Class A1 C-603-0175, Aviation Structural Mechanic (Structures Hydraulics) Class A1 d. Training Pipelines. NA I. ONBOARD (IN-SERVICE) TRAINING. Onboard training will continue when the student returns to their activity and performs the actual work under the supervision of personnel with more experience in this skill. This training will imprint the procedures and precautions further into the student s knowledge base. 1. Proficiency or Other Training Organic to the New Development. NA a. Maintenance Training Improvement Program. NA b. Aviation Maintenance Training Continuum System. Aviation Maintenance Training Management System (AMTCS) will provide career path training to the Sailor or Marine from their initial service entry to the end of their military career. AMTCS concepts will provide an integrated system that will satisfy the training and administrative requirements of both the individual and the organization. The benefits will be manifested in the increased effectiveness of the technicians and the increased efficiencies of the management of the training business process. Where appropriate, capitalizing on technological advances and integrating systems and processes can provide the right amount of training at the right time, thus meeting the CNO s mandated just-in-time training approach. I-12
Technology investments enable the development of several state-of-the-art training and administrative tools: Interactive Multimedia Instruction (IMI) for the technicians in the Fleet in the form of Interactive Courseware (ICW) with Computer Managed Instruction (CMI) and Computer Aided Instruction (CAI) for the schoolhouse. Included in the AMTCS development effort is the Aviation Maintenance Training Continuum System - Software Module, which provides testing [Test and Evaluation], recording [Electronic Certification Qualification Records], and a Feedback system. The core functionality of these AMTCS tools are based and designed around the actual maintenance-related tasks the technicians perform, and the tasks are stored and maintained in a Master Task List data bank. These tools are procured and fielded with appropriate Commercial-Off-The-Shelf (COTS) hardware and software, i.e., Fleet Training Devices - Laptops, Personal Computers (PC), Electronic Classrooms, Learning Resource Centers (LRC), operating software, and network software and hardware. Upon receipt of direction from OPNAV (N789H), AMTCS concepts are to be implemented and the new tools integrated into the daily training environment of all participating aviation activities and supporting elements. AMTCS will serve as the standard training system for aviation maintenance training within the Navy and Marine Corps, and is planned to supersede the existing Maintenance Training Improvement Program (MTIP) and Maintenance Training Management and Evaluation Program (MATMEP) programs. 2. Personnel Qualification Standards. NA 3. Other Onboard or In-Service Training Packages. NA J. LOGISTICS SUPPORT 1. Manufacturer and Contract Numbers. NA 2. Program Documentation. NA 3. Technical Data Plan. There are no technical manuals specifically for the NAVAIR Aviation Special Skills Training Program. Technical Manuals required for this training come from various existing aircraft and Navy technical manuals. For a complete list of technical manuals by course, refer to element IV.B.3 of this document. 4. Test Sets, Tools, and Test Equipment. All test sets, tools, and test equipment required for the NAVAIR Aviation Special Skills Training Program are listed in element IV.A.1 of this document. 5. Repair Parts. NA 6. Human Systems Integration. NA I-13
K. SCHEDULES 1. Installation and Delivery Schedules. The stand-up dates of the NAVAIR Aviation Special Skills Training are listed below by training activity. RFT SCHEDULE BY COURSE BY NADEP CIN, COURSE TITLE NADEP NORTH ISLAND NORFOLK NAVAL SHIPYARD NADEP JACKSON- VILLE NADEP CHERRY POINT N-701-0005 Non-Destructive Inspection Technician Recertification N-701-0006 Non-Destructive Inspection Technician Specific Task N-701-0007 Aircraft/Support Equipment Basic Welding Certification N-701-0008 Aircraft/Support Equipment Basic Welding Recertification N-701-0009 Oxyfuel/Shielded Metal Arc Welder Certification N-701-0010 Oxyfuel/Shielded Metal Arc Welder Recertification N-701-0013 Aircraft Corrosion Control N-701-0014 Aircraft Paint Touch Up and Markings N-701-0025 Gas Metal Arc Welding Certification Jan 83 Sep 96 Oct 87 Oct 83 Jan 82 Sep 96 Oct 87 Oct 83 Oct 80 Apr 96 Oct 87 Jul 86 Oct 80 Apr 96 Oct 87 Jul 86 Nov 82 Apr 96 May92 Jul 86 Nov 82 Apr 96 May 92 Jul 86 Jan 92 NA Nov 77 Jan 84 Jan 92 NA Jan 73 Oct 83 Mar 96 NA NA Apr 94 I-14
2. Ready For Operational Use Schedule. NA 3. Time Required to Install at Operational Sites. NA 4. Foreign Military Sales and Other Source Delivery Schedule. NA 5. Training Device and Technical Training Equipment Delivery Schedule. TTE for the NAVAIR Aviation Special Skills Training Program is listed in element IV.A.1 of this NTSP. There are no TDs for the NAVAIR Aviation Special Skills Training Program. Historically, due to funding complexities, TTE procurement, replacement, and upgrade requirements have been a problem area in the NAVAIR Aviation Special Skills Training Program. In accordance with financial documentation, the appropriate NAVAIR Program Office should provide support equipment used in this training program. Communications between various NAVAIR codes and offices has not resolved areas of responsibility. With the Aviation Special Skills training being physically located at NADEP facilities, misunderstandings of areas of responsibility are further complicated due to NADEPs being Working Capital Funded activities. TTE being in short supply, and/or of an obsolete model, significantly impacts the quality of training. In cases where noted in Part IV as TBD, TTE has been borrowed predominately from, but not limited to, the local Aircraft Intermediate Maintenance Department (AIMD). NAVAIRSYSCOM (AIR 3.4.6) has been evaluating the situations to determine appropriate actions necessary to alleviate current TTE shortfalls. The current plan is to provide all required equipment to each training activity to ensure continuous quality training is available. Updates to this NTSP will track progress in attaining the required equipment. L. GOVERNMENT-FURNISHED EQUIPMENT AND CONTRACTOR-FURNISHED EQUIPMENT TRAINING REQUIREMENTS. NA M. RELATED NTSPs AND OTHER APPLICABLE DOCUMENTS DOCUMENT OR NTSP TITLE DOCUMENT OR NTSP NUMBER PDA CODE STATUS Aviation Maintenance Personnel Training by Naval Aviation Depots NAVAIRINST 1500.2 (series) PMA205 Approved Dec 98 Naval Aviation Maintenance Program OPNAVINST 4790.2 (series) N789H Approved Feb 98 I-15
PART II - BILLET AND PERSONNEL REQUIREMENTS The following elements are not affected by the NAVAIR Aviation Special Skills Training and, therefore, are not included in Part II of this NTSP: II.A. Billet Requirements II.A.1.b. II.A.1.c. II.A.2.a. II.A.2.b. II.A.2.c. Billets Required for Operational and Fleet Support Activities Total Billets Required for Operational and Fleet Support Activities Operational and Fleet Support Activity Deactivation Schedule Billets to be Deleted in Operational and Fleet Support Activities Total Billets to be Deleted in Operational and Fleet Support Activities II - 1
PART II - BILLET AND PERSONNEL REQUIREMENTS II.A. BILLET REQUIREMENTS II.A.1.a. OPERATIONAL AND FLEET SUPPORT ACTIVITY ACTIVATION SCHEDULE SOURCE: NAVAIRSYSCOM AIR 3.4.6 DATE: 01/2001 ACTIVITY, UIC PFYs FLEET SUPPORT ACTIVITIES - NAVY Naval Aviation Depot Cherry Point 45008 1 0 0 0 0 0 Naval Aviation Depot Jacksonville 39829 1 0 0 0 0 0 Norfolk Naval Shipyard 49163 1 0 0 0 0 0 Naval Aviation Depot North Island 39503 1 0 0 0 0 0 TOTAL: 4 0 0 0 0 0 II - 2
II.A.3. TRAINING ACTIVITIES INSTRUCTOR AND SUPPORT BILLET REQUIREMENTS NADEP instructors are Wage Grade Lead personnel, i.e., civilians who work for the government. Therefore, there are no military instructors or support personnel. II - 3
II.A.4. CHARGEABLE STUDENT BILLET REQUIREMENTS ACTIVITY, USN/ PFYs CFY02 FY03 FY03 FY04 FY06 LOCATION, UIC USMC OFF ENL Naval Aviation Depot, MCAS Cherry Point, 45008 NAVY 4.3 4.3 4.3 4.3 4.3 4.3 USMC 10.7 10.7 10.7 10.7 10.7 10.7 Naval Aviation Depot, NAS Jacksonville, 39829 NAVY 7.7 7.7 7.7 7.7 7.7 7.7 USMC 1.5 1.5 1.5 1.5 1.5 1.5 Naval Aviation Depot Norfolk, Norfolk Naval Shipyard, 49163 NAVY 3.5 3.5 3.5 3.5 3.5 3.5 USMC 1.5 1.5 1.5 1.5 1.5 1.5 Naval Aviation Depot, NAS North Island, 39503 NAVY 13.9 13.9 13.9 13.9 13.9 13.9 USMC 3.0 3.0 3.0 3.0 3.0 3.0 SUMMARY TOTALS: NAVY 29.4 29.4 29.4 29.4 29.4 29.4 USMC 16.7 16.7 16.7 16.7 16.7 16.7 GRAND TOTALS: 46.1 46.1 46.1 46.1 46.1 46.1 Chargeable Student Billets are generated only when military personnel are on Permanent Change Of Station orders, i.e., enroute training. Therefore, Chargeable Student Billets are substantially less than actual student billets. II - 4
II.A.5. ANNUAL INCREMENTAL AND CUMULATIVE BILLETS DESIG/ PNEC/ SNEC/ BILLET RATING PMOS SMOS BASE +/- CUM +/- CUM +/- CUM +/- CUM +/- CUM USN Chargeable Student Billets ACDU and TAR 29 0 29 0 29 0 29 0 29 0 29 Total Chargeable Student Billets 29 0 29 0 29 0 29 0 29 0 29 USMC Chargeable Student Billets USMC and AR 17 0 17 0 17 0 17 0 17 0 17 Total Chargeable Student Billets 17 0 17 0 17 0 17 0 17 0 17 II - 5
II.B. PERSONNEL REQUIREMENTS II.B.1. ANNUAL TRAINING INPUT REQUIREMENTS CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification COURSE LENGTH: 2.0 Weeks NAVY TOUR LENGTH: 36 Months ATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00 TRAINING ACDU/TAR ACTIVITY SOURCE SELRES Naval Aviation Depot, MCAS Cherry Point NAVY ACDU 2 2 2 2 2 USMC USMC 10 10 10 10 10 Naval Aviation Depot, NAS Jacksonville NAVY ACDU 10 10 10 10 10 SELRES 2 2 2 2 2 USMC USMC 4 4 4 4 4 AR 2 2 2 2 2 Naval Aviation Depot Norfolk, Norfolk Naval Shipyard NAVY ACDU 14 14 14 14 14 USMC USMC 14 14 14 14 14 Naval Aviation Depot, NAS North Island NAVY ACDU 16 16 16 16 16 SELRES 4 4 4 4 4 USMC USMC 8 8 8 8 8 AR 2 2 2 2 2 DoD DCIVN 2 2 2 2 2 TOTAL: 90 90 90 90 90 CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task COURSE LENGTH: 0.2 Weeks NAVY TOUR LENGTH: 36 Months ATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00 TRAINING ACDU/TAR ACTIVITY SOURCE SELRES Naval Aviation Depot, MCAS Cherry Point NAVY ACDU 4 4 4 4 4 USMC USMC 5 5 5 5 5 Naval Aviation Depot, NAS Jacksonville NAVY ACDU 7 7 7 7 7 TAR 1 1 1 1 1 SELRES 1 1 1 1 1 USMC USMC 3 3 3 3 3 Naval Aviation Depot Norfolk, Norfolk Naval Shipyard NAVY ACDU 50 50 50 50 50 USMC USMC 22 22 22 22 22 Naval Aviation Depot, NAS North Island NAVY ACDU 6 6 6 6 6 TAR 1 1 1 1 1 SELRES 1 1 1 1 1 USMC USMC 3 3 3 3 3 DoD DCIVN 1 1 1 1 1 TOTAL: 105 105 105 105 105 II - 6
II.B.1. ANNUAL TRAINING INPUT REQUIREMENTS CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification COURSE LENGTH: 8.0 Weeks NAVY TOUR LENGTH: 36 Months ATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.16 TRAINING ACDU/TAR ACTIVITY SOURCE SELRES Naval Aviation Depot, MCAS Cherry Point NAVY ACDU 11 11 11 11 11 USMC USMC 29 29 29 29 29 Naval Aviation Depot, NAS Jacksonville NAVY ACDU 10 10 10 10 10 TAR 2 2 2 2 2 SELRES 2 2 2 2 2 USMC USMC 4 4 4 4 4 DoD DCIVN 1 1 1 1 1 Naval Aviation Depot Norfolk, Norfolk Naval Shipyard NAVY ACDU 15 15 15 15 15 USMC USMC 5 5 5 5 5 Naval Aviation Depot, NAS North Island NAVY ACDU 28 28 28 28 28 TAR 10 10 10 10 10 USMC USMC 10 10 10 10 10 TOTAL: 127 127 127 127 127 CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification COURSE LENGTH: 1.0 Weeks NAVY TOUR LENGTH: 36 Months ATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00 TRAINING ACDU/TAR ACTIVITY SOURCE SELRES Naval Aviation Depot, MCAS Cherry Point NAVY ACDU 8 8 8 8 8 USMC USMC 24 24 24 24 24 Naval Aviation Depot, NAS Jacksonville NAVY ACDU 2 2 2 2 2 TAR 1 1 1 1 1 SELRES 1 1 1 1 1 USMC USMC 1 1 1 1 1 DoD DCIVN 1 1 1 1 1 Naval Aviation Depot Norfolk, Norfolk Naval Shipyard NAVY ACDU 7 7 7 7 7 USMC USMC 3 3 3 3 3 Naval Aviation Depot, NAS North Island NAVY ACDU 8 8 8 8 8 TAR 1 1 1 1 1 SELRES 2 2 2 2 2 USMC USMC 4 4 4 4 4 DoD DCIVN 1 1 1 1 1 TOTAL: 64 64 64 64 64 II - 7
II.B.1. ANNUAL TRAINING INPUT REQUIREMENTS CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification COURSE LENGTH: 3.0 Weeks NAVY TOUR LENGTH: 36 Months ATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.06 TRAINING ACDU/TAR ACTIVITY SOURCE SELRES Naval Aviation Depot, MCAS Cherry Point NAVY ACDU 4 4 4 4 4 USMC USMC 12 12 12 12 12 Naval Aviation Depot, NAS Jacksonville NAVY ACDU 20 20 20 20 20 TAR 2 2 2 2 2 SELRES 3 3 3 3 3 USMC USMC 2 2 2 2 2 DoD DCIVN 3 3 3 3 3 Naval Aviation Depot Norfolk, Norfolk Naval Shipyard NAVY ACDU 15 15 15 15 15 USMC USMC 5 5 5 5 5 Naval Aviation Depot, NAS North Island NAVY ACDU 8 8 8 8 8 USMC USMC 8 8 8 8 8 TOTAL: 82 82 82 82 82 CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification COURSE LENGTH: 1.0 Weeks NAVY TOUR LENGTH: 36 Months ATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00 TRAINING ACDU/TAR ACTIVITY SOURCE SELRES Naval Aviation Depot, MCAS Cherry Point NAVY ACDU 6 6 6 6 6 USMC USMC 6 6 6 6 6 Naval Aviation Depot, NAS Jacksonville NAVY ACDU 6 6 6 6 6 TAR 1 1 1 1 1 SELRES 2 2 2 2 2 USMC USMC 2 2 2 2 2 DoD DCIVN 1 1 1 1 1 Naval Aviation Depot Norfolk, Norfolk Naval Shipyard NAVY ACDU 7 7 7 7 7 USMC USMC 3 3 3 3 3 Naval Aviation Depot, NAS North Island NAVY ACDU 4 4 4 4 4 TAR 2 2 2 2 2 SELRES 3 3 3 3 3 USMC USMC 5 5 5 5 5 DoD DCIVN 2 2 2 2 2 TOTAL: 50 50 50 50 50 II - 8
II.B.1. ANNUAL TRAINING INPUT REQUIREMENTS CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control COURSE LENGTH: 1.0 Weeks NAVY TOUR LENGTH: 36 Months ATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00 TRAINING ACDU/TAR ACTIVITY SOURCE SELRES Naval Aviation Depot, MCAS Cherry Point NAVY ACDU 46 46 46 46 46 USMC USMC 130 130 130 130 130 Naval Aviation Depot, NAS Jacksonville NAVY ACDU 154 154 154 154 154 TAR 4 4 4 4 4 SELRES 4 4 4 4 4 USMC USMC 10 10 10 10 10 DoD DCIVN 4 4 4 4 4 Naval Aviation Depot, NAS North Island NAVY ACDU 190 190 190 190 190 TAR 5 5 5 5 5 SELRES 10 10 10 10 10 USMC USMC 10 10 10 10 10 DoD DCIVN 5 5 5 5 5 TOTAL: 572 572 572 572 572 CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings COURSE LENGTH: 2.0 Weeks NAVY TOUR LENGTH: 36 Months ATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.00 TRAINING ACDU/TAR ACTIVITY SOURCE SELRES Naval Aviation Depot, MCAS Cherry Point NAVY ACDU 36 36 36 36 36 USMC USMC 92 92 92 92 92 Naval Aviation Depot, NAS Jacksonville NAVY ACDU 75 75 75 75 75 TAR 6 6 6 6 6 SELRES 10 10 10 10 10 USMC USMC 15 15 15 15 15 DOD DCIVN 6 6 6 6 6 Naval Aviation Depot, NAS North Island NAVY ACDU 125 125 125 125 125 TAR 10 10 10 10 10 SELRES 20 20 20 20 20 USMC USMC 15 15 15 15 15 DoD DCIVN 10 10 10 10 10 TOTAL: 420 420 420 420 420 II - 9
II.B.1. ANNUAL TRAINING INPUT REQUIREMENTS CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding Certification COURSE LENGTH: 3.0 Weeks NAVY TOUR LENGTH: 36 Months ATTRITION FACTOR: Navy: 0% USMC: 0% BACKOUT FACTOR: 0.06 TRAINING ACDU/TAR ACTIVITY SOURCE SELRES Naval Aviation Depot, MCAS Cherry Point NAVY ACDU 5 5 5 5 5 TAR 1 1 1 1 1 USMC USMC 9 9 9 9 9 Naval Aviation Depot, NAS North Island NAVY ACDU 4 4 4 4 4 USMC USMC 2 2 2 2 2 TOTAL: 21 21 21 21 21 II - 10
PART III - TRAINING REQUIREMENTS The following elements are not affected by the NAVAIR Aviation Special Skills Training Program and, therefore, are not included in Part III of this NTSP: III.A.1. III.A.2. Initial Training Requirements Follow-on Training III.A.2.b. Planned Courses III.A.2.c. Unique Courses III.A.3. Existing Training Phased Out III - 1
III.A.2. FOLLOW-ON TRAINING III.A.2.a. EXISTING COURSES CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC: MCAS Cherry Point, 45008 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 10 10 10 10 10 ATIR 10 10 10 10 10 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable LOCATION, UIC: NAS Jacksonville, 39829 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 10 10 10 10 10 ATIR 10 10 10 10 10 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable SOURCE: USN STUDENT CATEGORY: SELRES 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 6 6 6 6 6 ATIR 6 6 6 6 6 Output 0.2 0.2 0.2 0.2 0.2 AOB III - 2
0.2 0.2 0.2 0.2 0.2 Chargeable III - 3
III.A.2.a. EXISTING COURSES Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 III.A.2.a. EXISTING COURSES SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 14 14 14 14 14 ATIR 14 14 14 14 14 Output 0.5 0.5 0.5 0.5 0.5 AOB 0.5 0.5 0.5 0.5 0.5 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 14 14 14 14 14 ATIR 14 14 14 14 14 Output 0.5 0.5 0.5 0.5 0.5 AOB 0.5 0.5 0.5 0.5 0.5 Chargeable LOCATION, UIC: NAS North Island, 39503 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 16 16 16 16 16 ATIR 16 16 16 16 16 Output 0.5 0.5 0.5 0.5 0.5 AOB 0.5 0.5 0.5 0.5 0.5 Chargeable SOURCE: NAVY STUDENT CATEGORY: SELRES 4 4 4 4 4 ATIR 4 4 4 4 4 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 10 10 10 10 10 ATIR 10 10 10 10 10 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable III - 4
III.A.2.a. EXISTING COURSES SOURCE: DoD STUDENT CATEGORY: DCIVN 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task LOCATION, UIC: MCAS Cherry Point, 45008 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 4 4 4 4 4 ATIR 4 4 4 4 4 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 5 5 5 5 5 ATIR 5 5 5 5 5 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable LOCATION, UIC: NAS Jacksonville, 39829 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 8 8 8 8 8 ATIR 8 8 8 8 8 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: NAVY STUDENT CATEGORY: SELRES 1 1 1 1 1 ATIR 1 1 1 1 1 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable III - 5
III.A.2.a. EXISTING COURSES SOURCE: USMC STUDENT CATEGORY: USMC - AR 3 3 3 3 3 ATIR 3 3 3 3 3 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 50 50 50 50 50 ATIR 50 50 50 50 50 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 22 22 22 22 22 ATIR 22 22 22 22 22 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable LOCATION, UIC: NAS North Island, 39503 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 7 7 7 7 7 ATIR 7 7 7 7 7 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: NAVY STUDENT CATEGORY: SELRES 1 1 1 1 1 ATIR 1 1 1 1 1 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable III - 6
III.A.2.a. EXISTING COURSES SOURCE: USMC STUDENT CATEGORY: USMC - AR 3 3 3 3 3 ATIR 3 3 3 3 3 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: DoD STUDENT CATEGORY: DCIVN 1 1 1 1 1 ATIR 1 1 1 1 1 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC: MCAS Cherry Point, 45008 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 11 11 11 11 11 ATIR 11 11 11 11 11 Output 1.6 1.6 1.6 1.6 1.6 AOB 1.6 1.6 1.6 1.6 1.6 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 29 29 29 29 29 ATIR 29 29 29 29 29 Output 4.3 4.3 4.3 4.3 4.3 AOB 4.3 4.3 4.3 4.3 4.3 Chargeable LOCATION, UIC: NAS Jacksonville, 39829 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 12 12 12 12 12 ATIR 12 12 12 12 12 Output 1.8 1.8 1.8 1.8 1.8 AOB 1.8 1.8 1.8 1.8 1.8 Chargeable III - 7
III - 8
III.A.2.a. EXISTING COURSES SOURCE: USN STUDENT CATEGORY: SELRES 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.2 0.2 0.2 0.2 0.2 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 4 4 4 4 4 ATIR 4 4 4 4 4 Output 0.6 0.6 0.6 0.6 0.6 AOB 0.6 0.6 0.6 0.6 0.6 Chargeable SOURCE: DoD STUDENT CATEGORY: DCIVN 1 1 1 1 1 ATIR 1 1 1 1 1 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 15 15 15 15 15 ATIR 15 15 15 15 15 Output 2.2 2.2 2.2 2.2 2.2 AOB 2.2 2.2 2.2 2.2 2.2 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 5 5 5 5 5 ATIR 5 5 5 5 5 Output 0.7 0.7 0.7 0.7 0.7 AOB 0.7 0.7 0.7 0.7 0.7 Chargeable III - 9
III.A.2.a. EXISTING COURSES LOCATION, UIC: NAS North Island, 39503 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 38 38 38 38 38 ATIR 38 38 38 38 38 Output 5.6 5.6 5.6 5.6 5.6 AOB 5.6 5.6 5.6 5.6 5.6 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 10 10 10 10 10 ATIR 10 10 10 10 10 Output 1.5 1.5 1.5 1.5 1.5 AOB 1.5 1.5 1.5 1.5 1.5 Chargeable CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC: MCAS Cherry Point, 45008 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 8 8 8 8 8 ATIR 8 8 8 8 8 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 24 24 24 24 24 ATIR 24 24 24 24 24 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable III - 10
III.A.2.a. EXISTING COURSES LOCATION, UIC: NAS Jacksonville, 39829 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 3 3 3 3 3 ATIR 3 3 3 3 3 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: NAVY STUDENT CATEGORY: SELRES 1 1 1 1 1 ATIR 1 1 1 1 1 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 1 1 1 1 1 ATIR 1 1 1 1 1 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: DoD STUDENT CATEGORY: DCIVN 1 1 1 1 1 ATIR 1 1 1 1 1 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 7 7 7 7 7 ATIR 7 7 7 7 7 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable III - 11
III.A.2.a. EXISTING COURSES SOURCE: USMC STUDENT CATEGORY: USMC - AR 3 3 3 3 3 ATIR 3 3 3 3 3 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable LOCATION, UIC: NAS North Island, 39503 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 9 9 9 9 9 ATIR 9 9 9 9 9 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable SOURCE: NAVY STUDENT CATEGORY: SELRES 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 4 4 4 4 4 ATIR 4 4 4 4 4 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable SOURCE: DoD STUDENT CATEGORY: DCIVN 1 1 1 1 1 ATIR 1 1 1 1 1 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable III - 12
III.A.2.a. EXISTING COURSES CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC: MCAS Cherry Point, 45008 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 4 4 4 4 4 ATIR 4 4 4 4 4 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 12 12 12 12 12 ATIR 12 12 12 12 12 Output 0.2 0.2 0.2 0.2 0.2 AOB 0.2 0.2 0.2 0.2 0.2 Chargeable LOCATION, UIC: NAS Jacksonville, 39829 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 22 22 22 22 22 ATIR 22 22 22 22 22 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable SOURCE: NAVY STUDENT CATEGORY: SELRES 3 3 3 3 3 ATIR 3 3 3 3 3 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable III - 13
III.A.2.a. EXISTING COURSES SOURCE: DoD STUDENT CATEGORY: DCIVN 3 3 3 3 3 ATIR 3 3 3 3 3 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 15 15 15 15 15 ATIR 15 15 15 15 15 Output 0.2 0.2 0.2 0.2 0.2 AOB 0.2 0.2 0.2 0.2 0.2 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 5 5 5 5 5 ATIR 5 5 5 5 5 Output 0.0 0.0 0.0 0.0 0.0 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable LOCATION, UIC: NAS North Island, 39503 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 8 8 8 8 8 ATIR 8 8 8 8 8 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 8 8 8 8 8 ATIR 8 8 8 8 8 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable III - 14
III.A.2.a. EXISTING COURSES CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC: MCAS Cherry Point, 45008 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 6 6 6 6 6 ATIR 6 6 6 6 6 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 6 6 6 6 6 ATIR 6 6 6 6 6 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable LOCATION, UIC: NAS Jacksonville, 39829 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 7 7 7 7 7 ATIR 7 7 7 7 7 Output 0.4 0.4 0.4 0.4 0.4 AOB 0.4 0.4 0.4 0.4 0.4 Chargeable SOURCE: NAVY STUDENT CATEGORY: SELRES 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable III - 15
III.A.2.a. EXISTING COURSES SOURCE: DoD STUDENT CATEGORY: DCIVN 1 1 1 1 1 ATIR 1 1 1 1 1 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 7 7 7 7 7 ATIR 7 7 7 7 7 Output 0.4 0.4 0.4 0.4 0.4 AOB 0.4 0.4 0.4 0.4 0.4 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 3 3 3 3 3 ATIR 3 3 3 3 3 Output 0.2 0.2 0.2 0.2 0.2 AOB 0.2 0.2 0.2 0.2 0.2 Chargeable LOCATION, UIC: NAS North Island, 39503 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 6 6 6 6 6 ATIR 6 6 6 6 6 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable SOURCE: NAVY STUDENT CATEGORY: SELRES 3 3 3 3 3 ATIR 3 3 3 3 3 Output 0.2 0.2 0.2 0.2 0.2 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable III - 16
III.A.2.a. EXISTING COURSES SOURCE: USMC STUDENT CATEGORY: USMC - AR 5 5 5 5 5 ATIR 5 5 5 5 5 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable SOURCE: DoD STUDENT CATEGORY: DCIVN 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC: MCAS Cherry Point, 45008 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 46 46 46 46 46 ATIR 46 46 46 46 46 Output 0.6 0.6 0.6 0.6 0.6 AOB 0.6 0.6 0.6 0.6 0.6 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 130 130 130 130 130 ATIR 130 130 130 130 130 Output 1.8 1.8 1.8 1.8 1.8 AOB 1.8 1.8 1.8 1.8 1.8 Chargeable LOCATION, UIC: NAS Jacksonville, 39829 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 158 158 158 158 158 ATIR 158 158 158 158 158 Output 2.2 2.2 2.2 2.2 2.2 AOB 2.2 2.2 2.2 2.2 2.2 Chargeable III - 17
III.A.2.a. EXISTING COURSES SOURCE: USN STUDENT CATEGORY: SELRES 4 4 4 4 4 ATIR 4 4 4 4 4 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 10 10 10 10 10 ATIR 10 10 10 10 10 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable SOURCE: DoD STUDENT CATEGORY: DCIVN 4 4 4 4 4 ATIR 4 4 4 4 4 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable LOCATION, UIC: NAS North Island, 39503 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 195 195 195 195 195 ATIR 195 195 195 195 195 Output 2.7 2.7 2.7 2.7 2.7 AOB 2.7 2.7 2.7 2.7 2.7 Chargeable SOURCE: USN STUDENT CATEGORY: SELRES 10 10 10 10 10 ATIR 10 10 10 10 10 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable III - 18
III.A.2.a. EXISTING COURSES SOURCE: USMC STUDENT CATEGORY: USMC - AR 10 10 10 10 10 ATIR 10 10 10 10 10 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable SOURCE: DoD STUDENT CATEGORY: DCIVN 5 5 5 5 5 ATIR 5 5 5 5 5 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC: MCAS Cherry Point, 45008 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 36 36 36 36 36 ATIR 36 36 36 36 36 Output 1.2 1.2 1.2 1.2 1.2 AOB 1.2 1.2 1.2 1.2 1.2 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 92 92 92 92 92 ATIR 92 92 92 92 92 Output 3.0 3.0 3.0 3.0 3.0 AOB 3.0 3.0 3.0 3.0 3.0 Chargeable LOCATION, UIC: NAS Jacksonville, 39829 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 81 81 81 81 81 ATIR 81 81 81 81 81 Output 2.7 2.7 2.7 2.7 2.7 AOB 2.7 2.7 2.7 2.7 2.7 Chargeable III - 19
III.A.2.a. EXISTING COURSES SOURCE: USN STUDENT CATEGORY: SELRES 10 10 10 10 10 ATIR 10 10 10 10 10 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 15 15 15 15 15 ATIR 15 15 15 15 15 Output 0.5 0.5 0.5 0.5 0.5 AOB 0.5 0.5 0.5 0.5 0.5 Chargeable SOURCE: DoD STUDENT CATEGORY: DCIVN 6 6 6 6 6 ATIR 6 6 6 6 6 Output 0.2 0.2 0.2 0.2 0.2 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable LOCATION, UIC: NAS North Island, 39503 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 135 135 135 135 135 ATIR 135 135 135 135 135 Output 4.4 4.4 4.4 4.4 4.4 AOB 4.4 4.4 4.4 4.4 4.4 Chargeable SOURCE: USN STUDENT CATEGORY: SELRES 20 20 20 20 20 ATIR 20 20 20 20 20 Output 0.7 0.7 0.7 0.7 0.7 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable III - 20
III.A.2.a. EXISTING COURSES SOURCE: USMC STUDENT CATEGORY: USMC - AR 15 15 15 15 15 ATIR 15 15 15 15 15 Output 0.5 0.5 0.5 0.5 0.5 AOB 0.5 0.5 0.5 0.5 0.5 Chargeable SOURCE: DoD STUDENT CATEGORY: DCIVN 10 10 10 10 10 ATIR 10 10 10 10 10 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.0 0.0 0.0 0.0 0.0 Chargeable CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding Certification LOCATION, UIC: MCAS Cherry Point, 45008 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 6 6 6 6 6 ATIR 6 6 6 6 Output 0.3 0.3 0.3 0.3 0.3 AOB 0.3 0.3 0.3 0.3 0.3 Chargeable SOURCE: USMC STUDENT CATEGORY: USMC - AR 9 9 9 9 9 ATIR 9 9 9 9 9 Output 0.5 0.5 0.5 0.5 0.5 AOB 0.5 0.5 0.5 0.5 0.5 Chargeable LOCATION, UIC: NAS North Island, 39503 SOURCE: NAVY STUDENT CATEGORY: ACDU - TAR 4 4 4 4 4 ATIR 4 4 4 4 4 Output 0.2 0.2 0.2 0.2 0.2 AOB 0.2 0.2 0.2 0.2 0.2 Chargeable III - 21
III.A.2.a. EXISTING COURSES SOURCE: USMC STUDENT CATEGORY: USMC - AR 2 2 2 2 2 ATIR 2 2 2 2 2 Output 0.1 0.1 0.1 0.1 0.1 AOB 0.1 0.1 0.1 0.1 0.1 Chargeable III - 22
PART IV - TRAINING LOGISTICS SUPPORT REQUIREMENTS The following elements are not affected by the NAVAIR Aviation Special Skills Training Program and, therefore, are not included in Part IV of this NTSP: IV.A. Training Hardware IV.A.2. Training Devices IV.B.1. Training Services IV.C. Facility Requirements IV.C.1. IV.C.2. IV.C.3. Facility Requirements Summary (Space/Support) by Activity Facility Requirements Detailed by Activity and Course Facility Project Summary by Program Note: Historically, due to funding complexities, TTE procurement, replacement, and upgrade requirements have been a problem area in the NAVAIR Aviation Special Skills Training Program. In accordance with financial documentation, the appropriate NAVAIR Program Office should provide support equipment used in this training program. Communications between various NAVAIR codes and offices has not resolved areas of responsibility. With the Aviation Special Skills training being physically located at NADEP facilities, misunderstandings of areas of responsibility are further complicated due to NADEPs being Working Capital Funded activities. TTE being in short supply and/or of an obsolete model significantly impacts the quality of training. In cases where noted below as TBD, TTE has been borrowed predominately from, but not limited to, the local AIMD. NAVAIRSYSCOM (AIR 3.4.6) has been evaluating the situations to determine appropriate actions necessary to alleviate current TTE shortfalls. The current plan is to provide all required equipment to each training activity to ensure continuous quality training is available. Updates to this NTSP will track progress in attaining the required equipment. III - 1
PART IV - TRAINING LOGISTICS SUPPORT REQUIREMENTS IV.A. TRAINING HARDWARE IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC: MCAS Cherry Point, 45008 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS GPTE 201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Oct 83 GFE TBD ST 301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Oct 83 GFE TBD 302 X-Ray Densiometer (Part # 301) 1 Oct 83 GFE TBD 303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Oct 83 GFE TBD 304 X-Ray Illuminator (Part # 65-D4) 1 Oct 83 GFE TBD 305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Oct 83 GFE TBD 306 Light Source Microscope (Part # 190-1) 1 Oct 83 GFE TBD SPETE 601 Radiac-meter (Part # IM-231/CDP) 2 Oct 83 GFE TBD 602 Ultrasonic Test Set (Part # USN-52) 2 Oct 83 GFE TBD 603 Electronic Metal Flaw Detector (Part # PD-214) 2 Oct 83 GFE TBD 604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Oct 83 GFE TBD 605 Electrical Conductivity Tester (Part # FM-140) 1 Oct 83 GFE TBD 606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Oct 83 GFE TBD 607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Oct 83 GFE TBD CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC: NAS Jacksonville, 39829 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS GPTE 201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Oct 87 GFE TBD IV - 2
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE ST 301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Oct 87 GFE TBD 302 X-Ray Densiometer (Part # 301) 1 Oct 87 GFE TBD 303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Oct 87 GFE TBD 304 X-Ray Illuminator (Part # 65-D4) 1 Oct 87 GFE TBD 305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Oct 87 GFE TBD 306 Light Source Microscope (Part # 190-1) 1 Oct 87 GFE TBD SPETE 601 Radiac-meter (Part # IM-231/CDP) 2 Oct 87 GFE TBD 602 Ultrasonic Test Set (Part # USN-52) 2 Oct 87 GFE TBD 603 Electronic Metal Flaw Detector (Part # PD-214) 2 Oct 87 GFE TBD 604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Oct 87 GFE TBD 605 Electrical Conductivity Tester (Part # FM-140) 1 Oct 87 GFE TBD 606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Oct 87 GFE TBD 607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Oct 87 GFE TBD CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS GPTE 201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Sep 96 GFE TBD ST 301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Sep 96 GFE TBD 302 X-Ray Densiometer (Part # 301) 1 Sep 96 GFE TBD 303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Sep 96 GFE TBD 304 X-Ray Illuminator (Part # 65-D4) 1 Sep 96 GFE TBD 305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Sep 96 GFE TBD 306 Light Source Microscope (Part # 190-1) 1 Sep 96 GFE TBD IV - 3
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE SPETE 601 Radiac-meter (Part # IM-231/CDP) 2 Sep 96 GFE TBD 602 Ultrasonic Test Set (Part # USN-52) 2 Sep 96 GFE TBD 603 Electronic Metal Flaw Detector (Part # PD-214) 2 Sep 96 GFE TBD 604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Sep 96 GFE TBD 605 Electrical Conductivity Tester (Part # FM-140) 1 Sep 96 GFE TBD 606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Sep 96 GFE TBD 607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Sep 96 GFE TBD CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC: NAS North Island, 39503 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS GPTE 201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Jan 83 GFE TBD ST 301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Jan 83 GFE TBD 302 X-Ray Densiometer (Part # 301) 1 Jan 83 GFE TBD 303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Jan 83 GFE TBD 304 X-Ray Illuminator (Part # 65-D4) 1 Jan 83 GFE TBD 305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Jan 83 GFE TBD 306 Light Source Microscope (Part # 190-1) 1 Jan 83 GFE TBD SPETE 601 Radiac-meter (Part # IM-231/CDP) 2 Jan 83 GFE TBD 602 Ultrasonic Test Set (Part # USN-52) 2 Jan 83 GFE TBD 603 Electronic Metal Flaw Detector (Part # PD-214) 2 Jan 83 GFE TBD 604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Jan 83 GFE TBD 605 Electrical Conductivity Tester (Part # FM-140) 1 Jan 83 GFE TBD 606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Jan 83 GFE TBD 607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Jan 83 GFE TBD IV - 4
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task LOCATION, UIC: MCAS Cherry Point, 45008 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS GPTE 201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Oct 83 GFE TBD ST 301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Oct 83 GFE TBD 302 X-Ray Densiometer (Part # 301) 1 Oct 83 GFE TBD 303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Oct 83 GFE TBD 304 X-Ray Illuminator (Part # 65-D4) 1 Oct 83 GFE TBD 305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Oct 83 GFE TBD 306 Light Source Microscope (Part # 190-1) 1 Oct 83 GFE TBD SPETE 601 Radiac-meter (Part # IM-231/CDP) 2 Oct 83 GFE TBD 602 Ultrasonic Test Set (Part # USN-52) 2 Oct 83 GFE TBD 603 Electronic Metal Flaw Detector (Part # PD-214) 2 Oct 83 GFE TBD 604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Oct 83 GFE TBD 605 Electrical Conductivity Tester (Part # FM-140) 1 Oct 83 GFE TBD 606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Oct 83 GFE TBD 607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Oct 83 GFE TBD CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task LOCATION, UIC: NAS Jacksonville, 39829 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS GPTE 201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Oct 87 GFE TBD IV - 5
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE ST 301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Oct 87 GFE TBD 302 X-Ray Densiometer (Part # 301) 1 Oct 87 GFE TBD 303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Oct 87 GFE TBD 304 X-Ray Illuminator (Part # 65-D4) 1 Oct 87 GFE TBD 305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Oct 87 GFE TBD 306 Light Source Microscope (Part # 190-1) 1 Oct 87 GFE TBD SPETE 601 Radiac-meter (Part # IM-231/CDP) 2 Oct 87 GFE TBD 602 Ultrasonic Test Set (Part # USN-52) 2 Oct 87 GFE TBD 603 Electronic Metal Flaw Detector (Part # PD-214) 2 Oct 87 GFE TBD 604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Oct 87 GFE TBD 605 Electrical Conductivity Tester (Part # FM-140) 1 Oct 87 GFE TBD 606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Oct 87 GFE TBD 607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Oct 87 GFE TBD CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS GPTE 201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Sep 96 GFE TBD ST 301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Sep 96 GFE TBD 302 X-Ray Densiometer (Part # 301) 1 Sep 96 GFE TBD 303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Sep 96 GFE TBD 304 X-Ray Illuminator (Part # 65-D4) 1 Sep 96 GFE TBD 305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Sep 96 GFE TBD 306 Light Source Microscope (Part # 190-1) 1 Sep 96 GFE TBD IV - 6
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE SPETE 601 Radiac-meter (Part # IM-231/CDP) 2 Sep 96 GFE TBD 602 Ultrasonic Test Set (Part # USN-52) 2 Sep 96 GFE TBD 603 Electronic Metal Flaw Detector (Part # PD-214) 2 Sep 96 GFE TBD 604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Sep 96 GFE TBD 605 Electrical Conductivity Tester (Part # FM-140) 1 Sep 96 GFE TBD 606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Sep 96 GFE TBD 607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Sep 96 GFE TBD CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task LOCATION, UIC: NAS North Island, 39503 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS GPTE 201 Eddy Current Standard Reference (Part # NRK-3AST) 1 Jan 82 GFE TBD ST 301 Flexible Fiber-optic Borescope (Part # FF860D) 1 Jan 82 GFE TBD 302 X-Ray Densiometer (Part # 301) 1 Jan 82 GFE TBD 303 Portable Magnetic Inspection Unit (Part # DA-200) 1 Jan 82 GFE TBD 304 X-Ray Illuminator (Part # 65-D4) 1 Jan 82 GFE TBD 305 Expandable Hole Probe Kit (Part # NEC-8031) 1 Jan 82 GFE TBD 306 Light Source Microscope (Part # 190-1) 1 Jan 82 GFE TBD SPETE 601 Radiac-meter (Part # IM-231/CDP) 2 Jan 82 GFE TBD 602 Ultrasonic Test Set (Part # USN-52) 2 Jan 82 GFE TBD 603 Electronic Metal Flaw Detector (Part # PD-214) 2 Jan 82 GFE TBD 604 Ultrasonic Transducer Test Probe (Part # PD238) 1 Jan 82 GFE TBD 605 Electrical Conductivity Tester (Part # FM-140) 1 Jan 82 GFE TBD 606 Illuminate Intensity Meter (Part # 01-434-5112) 1 Jan 82 GFE TBD 607 Ultraviolet Metals Examination Light (Part # FC-100) 1 Jan 82 GFE TBD IV - 7
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC: MCAS Cherry Point, 45008 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 307 Foot Control (Part # RFCS-14) 8 Jul 86 GFE TBD 309 Piranha Shear 1 Jul 86 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Jul 86 GFE TBD 311 Belt Sander 6" X 48" 2 Jul 86 GFE TBD 312 Belt Sander 1" X 42" 2 Jul 86 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Jul 86 GFE TBD 314 Band Saw 1 Jul 86 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Jul 86 GFE TBD CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC: NAS Jacksonville, 39829 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 307 Foot Control (Part # RFCS-14) 8 Oct 87 GFE TBD 309 Piranha Shear 1 Oct 87 GFE Onboard 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Oct 87 GFE TBD 311 Belt Sander 6" X 48" 2 Oct 87 GFE TBD 312 Belt Sander 1" X 42" 2 Oct 87 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Oct 87 GFE TBD 314 Band Saw 1 Oct 87 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Oct 87 GFE TBD IV - 8
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 307 Foot Control (Part # RFCS-14) 8 Apr 96 GFE TBD 309 Piranha Shear 1 Apr 96 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Apr 96 GFE TBD 311 Belt Sander 6" X 48" 2 Apr 96 GFE TBD 312 Belt Sander 1" X 42" 2 Apr 96 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Apr 96 GFE TBD 314 Band Saw 1 Apr 96 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Apr 96 GFE TBD CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC: NAS North Island, 39503 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 307 Foot Control (Part # RFCS-14) 8 Oct 80 GFE TBD 309 Piranha Shear 1 Oct 80 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Oct 80 GFE TBD 311 Belt Sander 6" X 48" 2 Oct 80 GFE TBD 312 Belt Sander 1" X 42" 2 Oct 80 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Oct 80 GFE TBD 314 Band Saw 1 Oct 80 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Oct 80 GFE TBD IV - 9
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC: MCAS Cherry Point, 45008 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 307 Foot Control (Part # RFCS-14) 8 Jul 86 GFE TBD 309 Piranha Shear 1 Jul 86 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Jul 86 GFE TBD 311 Belt Sander 6" X 48" 2 Jul 86 GFE TBD 312 Belt Sander 1" X 42" 2 Jul 86 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Jul 86 GFE TBD 314 Band Saw 1 Jul 86 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Jul 86 GFE TBD CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC: NAS Jacksonville, 39829 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 307 Foot Control (Part # RFCS-14) 8 Oct 87 GFE TBD 309 Piranha Shear 1 Oct 87 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Oct 87 GFE TBD 311 Belt Sander 6" X 48" 2 Oct 87 GFE TBD 312 Belt Sander 1" X 42" 2 Oct 87 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Oct 87 GFE TBD 314 Band Saw 1 Oct 87 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Oct 87 GFE TBD IV - 10
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 307 Foot Control (Part # RFCS-14) 8 Apr 96 GFE TBD 309 Piranha Shear 1 Apr 96 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Apr 96 GFE TBD 311 Belt Sander 6" X 48" 2 Apr 96 GFE TBD 312 Belt Sander 1" X 42" 2 Apr 96 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Apr 96 GFE TBD 314 Band Saw 1 Apr 96 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Apr 96 GFE TBD CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC: NAS North Island, 39503 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 307 Foot Control (Part # RFCS-14) 8 Oct 80 GFE TBD 309 Piranha Shear 1 Oct 80 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Oct 80 GFE TBD 311 Belt Sander 6" X 48" 2 Oct 80 GFE TBD 312 Belt Sander 1" X 42" 2 Oct 80 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Oct 80 GFE TBD 314 Band Saw 1 Oct 80 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Oct 80 GFE TBD IV - 11
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC: MCAS Cherry Point, 45008 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 Jul 86 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Jul 86 GFE TBD 311 Belt Sander 6" X 48" 2 Jul 86 GFE TBD 312 Belt Sander 1" X 42" 2 Jul 86 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Jul 86 GFE TBD 314 Band Saw 1 Jul 86 GFE TBD 315 Light Duty Torches 8 Jul 86 GFE TBD 316 Acetylene Regulators (Part # AA55540-1) 8 Jul 86 GFE TBD 317 Oxygen Regulators (Part # 806-6506) 8 Jul 86 GFE TBD 318 Rod Oven (Part # 16C & 16STC) 1 Jul 86 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Jul 86 GFE TBD CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC: NAS Jacksonville, 39829 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 May 92 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 May 92 GFE TBD 311 Belt Sander 6" X 48" 2 May 92 GFE TBD 312 Belt Sander 1" X 42" 2 May 92 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 May 92 GFE TBD 314 Band Saw 1 May 92 GFE TBD 315 Light Duty Torches 8 May 92 GFE TBD IV - 12
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE 316 Acetylene Regulators (Part # AA55540-1) 8 May 92 GFE TBD 317 Oxygen Regulators (Part # 806-6506) 8 May 92 GFE TBD 318 Rod Oven (Part # 16C & 16STC) 1 May 92 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 May 92 GFE TBD CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 Apr 96 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Apr 96 GFE TBD 311 Belt Sander 6" X 48" 2 Apr 96 GFE TBD 312 Belt Sander 1" X 42" 2 Apr 96 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Apr 96 GFE TBD 314 Band Saw 1 Apr 96 GFE TBD 315 Light Duty Torches 8 Apr 96 GFE TBD 316 Acetylene Regulators (Part # AA55540-1) 8 Apr 96 GFE TBD 317 Oxygen Regulators (Part # 806-6506) 8 Apr 96 GFE TBD 318 Rod Oven (Part # 16C & 16STC) 1 Apr 96 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Apr 96 GFE TBD CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC: NAS North Island, 39503 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 Nov 82 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Nov 82 GFE TBD IV - 13
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE 311 Belt Sander 6" X 48" 2 Nov 82 GFE TBD 312 Belt Sander 1" X 42" 2 Nov 82 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Nov 82 GFE TBD 314 Band Saw 1 Nov 82 GFE TBD 315 Light Duty Torches 8 Nov 82 GFE TBD 316 Acetylene Regulators (Part # AA55540-1) 8 Nov 82 GFE TBD 317 Oxygen Regulators (Part # 806-6506) 8 Nov 82 GFE TBD 318 Rod Oven (Part # 16C & 16STC) 1 Nov 82 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Nov 82 GFE TBD CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC: MCAS Cherry Point, 45008 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 Jul 86 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Jul 86 GFE TBD 311 Belt Sander 6" X 48" 2 Jul 86 GFE TBD 312 Belt Sander 1" X 42" 2 Jul 86 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Jul 86 GFE TBD 314 Band Saw 1 Jul 86 GFE TBD 315 Light Duty Torches 8 Jul 86 GFE TBD 316 Acetylene Regulators (Part # AA55540-1) 8 Jul 86 GFE TBD 317 Oxygen Regulators (Part # 806-6506) 8 Jul 86 GFE TBD 318 Rod Oven (Part # 16C & 16STC) 1 Jul 86 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Jul 86 GFE TBD IV - 14
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC: NAS Jacksonville, 39829 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 May 92 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 May 92 GFE TBD 311 Belt Sander 6" X 48" 2 May 92 GFE TBD 312 Belt Sander 1" X 42" 2 May 92 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 May 92 GFE TBD 314 Band Saw 1 May 92 GFE TBD 315 Light Duty Torches 8 May 92 GFE TBD 316 Acetylene Regulators (Part # AA55540-1) 8 May 92 GFE TBD 317 Oxygen Regulators (Part # 806-6506) 8 May 92 GFE TBD 318 Rod Oven (Part # 16C & 16STC) 1 May 92 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 May 92 GFE TBD CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 Apr 96 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Apr 96 GFE TBD 311 Belt Sander 6" X 48" 2 Apr 96 GFE TBD 312 Belt Sander 1" X 42" 2 Apr 96 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Apr 96 GFE TBD 314 Band Saw 1 Apr 96 GFE TBD 315 Light Duty Torches 8 Apr 96 GFE TBD IV - 15
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE 316 Acetylene Regulators (Part # AA55540-1) 8 Apr 96 GFE TBD 317 Oxygen Regulators (Part # 806-6506) 8 Apr 96 GFE TBD 318 Rod Oven (Part # 16C & 16STC) 1 Apr 96 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Apr 96 GFE TBD CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC: NAS North Island, 39503 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 Nov 82 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Nov 82 GFE TBD 311 Belt Sander 6" X 48" 2 Nov 82 GFE TBD 312 Belt Sander 1" X 42" 2 Nov 82 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Nov 82 GFE TBD 314 Band Saw 1 Nov 82 GFE TBD 315 Light Duty Torches 8 Nov 82 GFE TBD 316 Acetylene Regulators (Part # AA55540-1) 8 Nov 82 GFE TBD 317 Oxygen Regulators (Part # 806-6506) 8 Nov 82 GFE TBD 318 Rod Oven (Part # 16C & 16STC) 1 Nov 82 GFE TBD GPETE 608 Miller Synchro Wave (Part # 350LX) 8 Nov 82 GFE TBD CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC: MCAS Cherry Point, 45008 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 319 Paint Agitator (Part # MIL-M-3070) 1 Jan 84 GFE TBD 320 Air Regulator Assembly (Part # MILS12928 CLASS1) 2 Jan 84 GFE TBD IV - 16
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE 321 Pneumatic Oscillating Sander (Part # A-A-2687) 2 Jan 84 GFE TBD 322 Paint Booth Filter (Part # 29-159) 10 Jan 84 GFE TBD 323 Paint Booth (Part # BD-6) 1 Jan 84 GFE TBD 324 Blast Cleaning Machine (Part # BNP-C-150-6) 1 Jan 84 GFE TBD 325 Survivair Respirator, Small (Part # 2100-00) 3 Jan 84 GFE TBD 326 Survivair Respirator, Medium (Part # 2200-00) 3 Jan 84 GFE TBD 327 Survivair Respirator, Large (Part # 2300-00) 3 Jan 84 GFE TBD 328 MSA Respirator, Small (Part # 465825) 3 Jan 84 GFE TBD 329 MSA Respirator, Medium (Part # 460968) 3 Jan 84 GFE TBD 330 MSA Respirator, Large (Part # 466486) 3 Jan 84 GFE TBD 331 Artist Air Brush (Part # B17151) 2 Jan 84 GFE TBD 332 Type III Depth Gage (Part # GGG-C-105) 10 Jan 84 GFE TBD 333 Optical Micrometer Kit (Part # 966A1) 1 Jan 84 GFE TBD CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC: NAS Jacksonville, 39829 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 319 Paint Agitator (Part # MIL-M-3070) 1 Nov 77 GFE TBD 320 Air Regulator Assembly (Part # MILS12928 CLASS1) 2 Nov 77 GFE TBD 321 Pneumatic Oscillating Sander (Part # A-A-2687) 2 Nov 77 GFE TBD 322 Paint Booth Filter (Part # 29-159) 10 Nov 77 GFE TBD 323 Paint Booth (Part # BD-6) 1 Nov 77 GFE TBD 324 Blast Cleaning Machine (Part # BNP-C-150-6) 1 Nov 77 GFE TBD 325 Survivair Respirator, Small (Part # 2100-00) 3 Nov 77 GFE TBD 326 Survivair Respirator, Medium (Part # 2200-00) 3 Nov 77 GFE TBD 327 Survivair Respirator, Large (Part # 2300-00) 3 Nov 77 GFE TBD 328 MSA Respirator, Small (Part # 465825) 3 Nov 77 GFE TBD IV - 17
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE 329 MSA Respirator, Medium (Part # 460968) 3 Nov 77 GFE TBD 330 MSA Respirator, Large (Part # 466486) 3 Nov 77 GFE TBD 331 Artist Air Brush (Part # B17151) 2 Nov 77 GFE TBD 332 Type III Depth Gage (Part # GGG-C-105) 10 Nov 77 GFE TBD 333 Optical Micrometer Kit (Part # 966A1) 1 Nov 77 GFE TBD CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC: NAS North Island, 39503 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 319 Paint Agitator (Part # MIL-M-3070) 1 Jan 92 GFE TBD 320 Air Regulator Assembly (Part # MILS12928 CLASS1) 2 Jan 92 GFE TBD 321 Pneumatic Oscillating Sander (Part # A-A-2687) 2 Jan 92 GFE TBD 322 Paint Booth Filter (Part # 29-159) 10 Jan 92 GFE TBD 323 Paint Booth (Part # BD-6) 1 Jan 92 GFE TBD 324 Blast Cleaning Machine (Part # BNP-C-150-6) 1 Jan 92 GFE TBD 325 Survivair Respirator, Small (Part # 2100-00) 3 Jan 92 GFE TBD 326 Survivair Respirator, Medium (Part # 2200-00) 3 Jan 92 GFE TBD 327 Survivair Respirator, Large (Part # 2300-00) 3 Jan 92 GFE TBD 328 MSA Respirator, Small (Part # 465825) 3 Jan 92 GFE TBD 329 MSA Respirator, Medium (Part # 460968) 3 Jan 92 GFE TBD 330 MSA Respirator, Large (Part # 466486) 3 Jan 92 GFE TBD 331 Artist Air Brush (Part # B17151) 2 Jan 92 GFE TBD 332 Type III Depth Gage (Part # GGG-C-105) 10 Jan 92 GFE TBD 333 Optical Micrometer Kit (Part # 966A1) 1 Jan 92 GFE TBD IV - 18
CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC: MCAS Cherry Point, 45008 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE ST 319 Paint Agitator (Part # MIL-M-3070) 1 Oct 83 GFE TBD 323 Paint Booth (Part # BD-6) 1 Oct 83 GFE TBD 325 Survivair Respirator, Small (Part # 2100-00) 3 Oct 83 GFE TBD 326 Survivair Respirator, Medium (Part # 2200-00) 3 Oct 83 GFE TBD 327 Survivair Respirator, Large (Part # 2300-00) 3 Oct 83 GFE TBD 328 MSA Respirator, Small (Part # 465825) 3 Oct 83 GFE TBD 329 MSA Respirator, Medium (Part # 460968) 3 Oct 83 GFE TBD 330 MSA Respirator, Large (Part # 466486) 3 Oct 83 GFE TBD 334 Air Regulator Assembly (Part # MILS12928CLASS1) 2 Oct 83 GFE TBD 336 Paint Gun Washer System (Part # 112-636) 1 Oct 83 GFE TBD 337 Airverter Paint Gun Outfit (Part # AV-001/005) 2 Oct 83 GFE TBD 338 Pro Touchup Airverter Paint Gun (Part # PT-100) 2 Oct 83 GFE TBD CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC: NAS Jacksonville, 39829 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 319 Paint Agitator (Part # MIL-M-3070) 1 Jan 73 GFE TBD 323 Paint Booth (Part # BD-6) 1 Jan 73 GFE TBD 325 Survivair Respirator, Small (Part # 2100-00) 3 Jan 73 GFE TBD 326 Survivair Respirator, Medium (Part # 2200-00) 3 Jan 73 GFE TBD 327 Survivair Respirator, Large (Part # 2300-00) 3 Jan 73 GFE TBD 328 MSA Respirator, Small (Part # 465825) 3 Jan 73 GFE TBD 329 MSA Respirator, Medium (Part # 460968) 3 Jan 73 GFE TBD 330 MSA Respirator, Large (Part # 466486) 3 Jan 73 GFE TBD IV - 19
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE 334 Air Regulator Assembly (Part # MILS12928CLASS1) 2 Jan 73 GFE TBD 336 Paint Gun Washer System (Part # 112-636) 1 Jan 73 GFE TBD 337 Airverter Paint Gun Outfit (Part # AV-001/005) 2 Jan 73 GFE TBD 338 Pro Touchup Airverter Paint Gun (Part # PT-100) 2 Jan 73 GFE TBD CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC: NAS North Island, 39503 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 319 Paint Agitator (Part # MIL-M-3070) 1 Jan 92 GFE TBD 323 Paint Booth (Part # BD-6) 1 Jan 92 GFE TBD 325 Survivair Respirator, Small (Part # 2100-00) 3 Jan 92 GFE TBD 326 Survivair Respirator, Medium (Part # 2200-00) 3 Jan 92 GFE TBD 327 Survivair Respirator, Large (Part # 2300-00) 3 Jan 92 GFE TBD 328 MSA Respirator, Small (Part # 465825) 3 Jan 92 GFE TBD 329 MSA Respirator, Medium (Part # 460968) 3 Jan 92 GFE TBD 330 MSA Respirator, Large (Part # 466486) 3 Jan 92 GFE TBD 334 Air Regulator Assembly (Part # MILS12928CLASS1) 2 Jan 92 GFE TBD 336 Paint Gun Washer System (Part # 112-636) 1 Jan 92 GFE TBD 337 Airverter Paint Gun Outfit (Part # AV-001/005) 2 Jan 92 GFE TBD 338 Pro Touchup Airverter Paint Gun (Part # PT-100) 2 Jan 92 GFE TBD CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding Certification LOCATION, UIC: MCAS Cherry Point, 45008 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 Apr 94 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Apr 94 GFE TBD 311 Belt Sander 6" X 48" 1 Apr 94 GFE TBD IV - 20
IV.A.1. TTE / GPTE / SPTE / ST / GPETE / SPETE 312 Belt Sander 1" X 42" 1 Apr 94 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Apr 94 GFE TBD 314 Band Saw 1 Apr 94 GFE TBD CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding Certification LOCATION, UIC: NAS North Island, 39503 ITEM EQUIPMENT / GFE NO. TYPE OR RANGE OF REPAIR PARTS REQD REQD CFE STATUS ST 309 Piranha Shear 1 Mar 96 GFE TBD 310 Sand Blaster Table Top (Part # BNP-55-2) 1 Mar 96 GFE TBD 311 Belt Sander 6" X 48" 1 Mar 96 GFE TBD 312 Belt Sander 1" X 42" 1 Mar 96 GFE TBD 313 Baldor Chop Saw (Part # 12AA) 1 Mar 96 GFE TBD 314 Band Saw 1 Mar 96 GFE TBD IV - 21
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC: MCAS Cherry Point, 45008 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Oct 83 TBD Carbon Dioxide Fire Extinguisher 1 Oct 83 TBD Color Printer 1 Oct 83 TBD Desk Top Pentium III Computer 1 Oct 83 TBD Instructor Lesson Guide 3 Oct 83 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Oct 83 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 83 TBD Projector (Part # MT830PLUS) 1 Oct 83 TBD Projector Screen (Part # SB-QRT-670S) 1 Oct 83 TBD Student Guide 10 Oct 83 Onboard Student Worksheets 10 Oct 83 Onboard CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC: NAS Jacksonville, 39829 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Oct 87 TBD Carbon Dioxide Fire Extinguisher 1 Oct 87 TBD Color Printer 1 Oct 87 TBD Desk Top Pentium III Computer 1 Oct 87 TBD Instructor Lesson Guide 3 Oct 87 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Oct 87 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 87 TBD Projector (Part # MT830PLUS) 1 Oct 87 TBD Projector Screen (Part # SB-QRT-670S) 1 Oct 87 TBD Student Guide 10 Oct 87 Onboard Student Worksheets 10 Oct 87 Onboard CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Sep 96 TBD Carbon Dioxide Fire Extinguisher 1 Sep 96 TBD Color Printer 1 Sep 96 TBD Desk Top Pentium III Computer 1 Sep 96 TBD Instructor Lesson Guide 3 Sep 96 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Sep 96 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Sep 96 TBD Projector (Part # MT830PLUS) 1 Sep 96 TBD Projector Screen (Part # SB-QRT-670S) 1 Sep 96 TBD Student Guide 10 Sep 96 Onboard Student Worksheets 10 Sep 96 Onboard IV - 22
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC: NAS North Island, 39503 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Jan 83 TBD Carbon Dioxide Fire Extinguisher 1 Jan 83 TBD Color Printer 1 Jan 83 TBD Desk Top Pentium III Computer 1 Jan 83 TBD Instructor Lesson Guide 3 Jan 83 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Jan 83 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jan 83 TBD Projector (Part # MT830PLUS) 1 Jan 83 TBD Projector Screen (Part # SB-QRT-670S) 1 Jan 83 TBD Student Guide 10 Jan 83 Onboard Student Worksheets 10 Jan 83 Onboard CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task LOCATION, UIC: MCAS Cherry Point, 45008 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Oct 83 TBD Carbon Dioxide Fire Extinguisher 1 Oct 83 TBD Color Printer 1 Oct 83 TBD Desk Top Pentium III Computer 1 Oct 83 TBD Instructor Lesson Guide 3 Oct 83 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Oct 83 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 83 TBD Projector (Part # MT830PLUS) 1 Oct 83 TBD Projector Screen (Part # SB-QRT-670S) 1 Oct 83 TBD Student Guide 5 Oct 83 Onboard Student Worksheets 5 Oct 83 Onboard CIN, COURSE TITLE: D-701-0006, Non-Destructive Inspection Technician Specific Task LOCATION, UIC: NAS Jacksonville, 39829 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Oct 87 TBD Carbon Dioxide Fire Extinguisher 1 Oct 87 TBD Color Printer 1 Oct 87 TBD Desk Top Pentium III Computer 1 Oct 87 TBD Instructor Lesson Guide 3 Oct 87 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Oct 87 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 87 TBD Projector (Part # MT830PLUS) 1 Oct 87 TBD Projector Screen (Part # SB-QRT-670S) 1 Oct 87 TBD Student Guide 5 Oct 87 Onboard Student Worksheets 5 Oct 87 Onboard IV - 23
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task LOCATION, UIC: NAS North Island, 39503 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Jan 82 TBD Carbon Dioxide Fire Extinguisher 1 Jan 82 TBD Color Printer 1 Jan 82 TBD Desk Top Pentium III Computer 1 Jan 82 TBD Instructor Lesson Guide 3 Jan 82 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Jan 82 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jan 82 TBD Projector (Part # MT830PLUS) 1 Jan 82 TBD Projector Screen (Part # SB-QRT-670S) 1 Jan 82 TBD Student Guide 5 Jan 82 Onboard Student Worksheets 5 Jan 82 Onboard CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Sep 96 TBD Carbon Dioxide Fire Extinguisher 1 Sep 96 TBD Color Printer 1 Sep 96 TBD Desk Top Pentium III Computer 1 Sep 96 TBD Instructor Lesson Guide 3 Sep 96 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Sep 96 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Sep 96 TBD Projector (Part # MT830PLUS) 1 Sep 96 TBD Projector Screen (Part # SB-QRT-670S) 1 Sep 96 TBD Student Guide 5 Sep 96 Onboard Student Worksheets 5 Sep 96 Onboard CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC: MCAS Cherry Point, 45008 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Jul 86 TBD Carbon Dioxide Fire Extinguisher 1 Jul 86 TBD Color Printer 1 Jul 86 TBD Desk Top Pentium III Computer 1 Jul 86 TBD Instructor Lesson Guide 3 Jul 86 TBD Integrated VHS Play/Record (Part # AG-520A) 1 Jul 86 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jul 86 TBD Projector (Part # MT830PLUS) 1 Jul 86 TBD Projector Screen (Part # SB-QRT-670S) 1 Jul 86 TBD Student Guide 14 Jul 86 Onboard Student Worksheets 14 Jul 86 Onboard IV - 24
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC: NAS Jacksonville, 39829 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Oct 87 TBD Carbon Dioxide Fire Extinguisher 1 Oct 87 TBD Color Printer 1 Oct 87 TBD Desk Top Pentium III Computer 1 Oct 87 TBD Instructor Lesson Guide 3 Oct 87 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Oct 87 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 87 TBD Projector (Part # MT830PLUS) 1 Oct 87 TBD Projector Screen (Part # SB-QRT-670S) 1 Oct 87 TBD Student Guide 14 Oct 87 Onboard Student Worksheets 14 Oct 87 Onboard CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC: NAS North Island, 39503 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Oct 80 TBD Carbon Dioxide Fire Extinguisher 1 Oct 80 TBD Color Printer 1 Oct 80 TBD Desk Top Pentium III Computer 1 Oct 80 TBD Instructor Lesson Guide 3 Oct 80 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Oct 80 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 80 TBD Projector (Part # MT830PLUS) 1 Oct 80 TBD Projector Screen (Part # SB-QRT-670S) 1 Oct 80 TBD Student Guide 14 Oct 80 Onboard Student Worksheets 14 Oct 80 Onboard CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Apr 96 TBD Carbon Dioxide Fire Extinguisher 1 Apr 96 TBD Color Printer 1 Apr 96 TBD Desk Top Pentium III Computer 1 Apr 96 TBD Instructor Lesson Guide 3 Apr 96 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Apr 96 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 96 TBD Projector (Part # MT830PLUS) 1 Apr 96 TBD Projector Screen (Part # SB-QRT-670S) 1 Apr 96 TBD Student Guide 14 Apr 96 Onboard Student Worksheets 14 Apr 96 Onboard IV - 25
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC: MCAS Cherry Point, 45008 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Jul 86 TBD Carbon Dioxide Fire Extinguisher 1 Jul 86 TBD Desk Top Pentium III Computer 1 Jul 86 TBD Instructor Lesson Guide 3 Jul 86 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Jul 86 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jul 86 TBD Projector (Part # MT830PLUS) 1 Jul 86 TBD Projector Screen (Part # SB-QRT-670S) 1 Jul 86 TBD Student Guide 10 Jul 86 Onboard Student Worksheets 10 Jul 86 Onboard CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC: NAS Jacksonville, 39829 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Oct 87 TBD Carbon Dioxide Fire Extinguisher 1 Oct 87 TBD Desk Top Pentium III Computer 1 Oct 87 TBD Instructor Lesson Guide 3 Oct 87 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Oct 87 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 87 TBD Projector (Part # MT830PLUS) 1 Oct 87 TBD Projector Screen (Part # SB-QRT-670S) 1 Oct 87 TBD Student Guide 10 Oct 87 Onboard Student Worksheets 10 Oct 87 Onboard CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC: NAS North Island, 39503 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Oct 80 TBD Carbon Dioxide Fire Extinguisher 1 Oct 80 TBD Desk Top Pentium III Computer 1 Oct 80 TBD Instructor Lesson Guide 3 Oct 80 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Oct 80 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Oct 80 TBD Projector (Part # MT830PLUS) 1 Oct 80 TBD Projector Screen (Part # SB-QRT-670S) 1 Oct 80 TBD Student Guide 10 Oct 80 Onboard Student Worksheets 10 Oct 80 Onboard IV - 26
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: C-701-0008, Aircraft/Support Equipment Basic Welding Recertification (Track N-701-0008) Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Apr 96 TBD Carbon Dioxide Fire Extinguisher 1 Apr 96 TBD Desk Top Pentium III Computer 1 Apr 96 TBD Instructor Lesson Guide 3 Apr 96 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Apr 96 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 96 TBD Projector (Part # MT830PLUS) 1 Apr 96 TBD Projector Screen (Part # SB-QRT-670S) 1 Apr 96 TBD Student Guide 10 Apr 96 Onboard Student Worksheets 10 Apr 96 Onboard CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC: MCAS Cherry Point, 45008 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Jul 86 TBD Carbon Dioxide Fire Extinguisher 1 Jul 86 TBD Desk Top Pentium III Computer 1 Jul 86 TBD Instructor Lesson Guide 3 Jul 86 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Jul 86 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jul 86 TBD Projector (Part # MT830PLUS) 1 Jul 86 TBD Projector Screen (Part # SB-QRT-670S) 1 Jul 86 TBD Student Guide 10 Jul 86 Onboard Student Worksheets 10 Jul 86 Onboard CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC: NAS Jacksonville, 39829 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 May 92 TBD Carbon Dioxide Fire Extinguisher 1 May 92 TBD Desk Top Pentium III Computer 1 May 92 TBD Instructor Lesson Guide 3 May 92 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 May 92 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 May 92 TBD Projector (Part # MT830PLUS) 1 May 92 TBD Projector Screen (Part # SB-QRT-670S) 1 May 92 TBD Student Guide 10 May 92 Onboard Student Worksheets 10 May 92 Onboard IV - 27
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC: NAS North Island, 39503 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Nov 82 TBD Carbon Dioxide Fire Extinguisher 1 Nov 82 TBD Desk Top Pentium III Computer 1 Nov 82 TBD Instructor Lesson Guide 3 Nov 82 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Nov 82 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Nov 82 TBD Projector (Part # MT830PLUS) 1 Nov 82 TBD Projector Screen (Part # SB-QRT-670S) 1 Nov 82 TBD Student Guide 10 Nov 82 Onboard Student Worksheets 10 Nov 82 Onboard CIN, COURSE TITLE: C-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification (Track N-701-0009) Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Apr 96 TBD Carbon Dioxide Fire Extinguisher 1 Apr 96 TBD Desk Top Pentium III Computer 1 Apr 96 TBD Instructor Lesson Guide 3 Apr 96 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Apr 96 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 96 TBD Projector (Part # MT830PLUS) 1 Apr 96 TBD Projector Screen (Part # SB-QRT-670S) 1 Apr 96 TBD Student Guide 10 Apr 96 Onboard Student Worksheets 10 Apr 96 Onboard CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC: MCAS Cherry Point, 45008 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Jul 86 TBD Carbon Dioxide Fire Extinguisher 1 Jul 86 TBD Color Printer 1 Jul 86 TBD Desk Top Pentium III Computer 1 Jul 86 TBD Instructor Lesson Guide 3 Jul 86 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Jul 86 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jul 86 TBD Projector (Part # MT830PLUS) 1 Jul 86 TBD Projector Screen (Part # SB-QRT-670S) 1 Jul 86 TBD Student Guide 10 Jul 86 Onboard Student Worksheets 10 Jul 86 Onboard IV - 28
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC: NAS Jacksonville, 39829 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 May 92 TBD Carbon Dioxide Fire Extinguisher 1 May 92 TBD Color Printer 1 May 92 TBD Desk Top Pentium III Computer 1 May 92 TBD Instructor Lesson Guide 3 May 92 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 May 92 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 May 92 TBD Projector (Part # MT830PLUS) 1 May 92 TBD Projector Screen (Part # SB-QRT-670S) 1 May 92 TBD Student Guide 10 May 92 Onboard Student Worksheets 10 May 92 Onboard CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC: NAS North Island, 39503 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Nov 82 TBD Carbon Dioxide Fire Extinguisher 1 Nov 82 TBD Color Printer 1 Nov 82 TBD Desk Top Pentium III Computer 1 Nov 82 TBD Instructor Lesson Guide 3 Nov 82 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Nov 82 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Nov 82 TBD Projector (Part # MT830PLUS) 1 Nov 82 TBD Projector Screen (Part # SB-QRT-670S) 1 Nov 82 TBD Student Guide 10 Nov 82 Onboard Student Worksheets 10 Nov 82 Onboard CIN, COURSE TITLE: C-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification (Track N-701-0010) Norfolk LOCATION, UIC: Norfolk Naval Shipyard, 49163 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Apr 96 TBD Carbon Dioxide Fire Extinguisher 1 Apr 96 TBD Color Printer 1 Apr 96 TBD Desk Top Pentium III Computer 1 Apr 96 TBD Instructor Lesson Guide 3 Apr 96 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Apr 96 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 96 TBD Projector (Part # MT830PLUS) 1 Apr 96 TBD Projector Screen (Part # SB-QRT-670S) 1 Apr 96 TBD Student Guide 10 Apr 96 Onboard Student Worksheets 10 Apr 96 Onboard IV - 29
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC: MCAS Cherry Point, 45008 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Jan 84 TBD Carbon Dioxide Fire Extinguisher 1 Jan 84 TBD Desk Top Pentium III Computer 1 Jan 84 TBD Instructor Lesson Guide 3 Jan 84 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Jan 84 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jan 84 TBD Projector (Part # MT830PLUS) 1 Jan 84 TBD Projector Screen (Part # SB-QRT-670S) 1 Jan 84 TBD Student Guide 12 Jan 84 Onboard Student Worksheets 12 Jan 84 Onboard CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC: NAS Jacksonville, 39829 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Nov 77 TBD Carbon Dioxide Fire Extinguisher 1 Nov 77 TBD Desk Top Pentium III Computer 1 Nov 77 TBD Instructor Lesson Guide 3 Nov 77 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Nov 77 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Nov 77 TBD Projector (Part # MT830PLUS) 1 Nov 77 TBD Projector Screen (Part # SB-QRT-670S) 1 Nov 77 TBD Student Guide 12 Nov 77 Onboard Student Worksheets 12 Nov 77 Onboard CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC: NAS North Island, 39503 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Jan 92 TBD Carbon Dioxide Fire Extinguisher 1 Jan 92 TBD Desk Top Pentium III Computer 1 Jan 92 TBD Instructor Lesson Guide 3 Jan 92 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Jan 92 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Jan 92 TBD Projector (Part # MT830PLUS) 1 Jan 92 TBD Projector Screen (Part # SB-QRT-670S) 1 Jan 92 TBD Student Guide 12 Jan 92 Onboard Student Worksheets 12 Jan 92 Onboard IV - 30
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC: MCAS Cherry Point, 45008 TYPES OF MATERIAL OR AID REQD REQD STATUS Color Printer 1 Oct 83 TBD Drafting Table (Part # VLT32T) 10 Oct 83 TBD Instructor Lesson Guide 3 Oct 83 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Oct 83 TBD Overhead Projector (Part # 1BC7) 1 Oct 83 TBD Student Guide 12 Oct 83 Onboard Student Worksheets 12 Oct 83 Onboard CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC: NAS Jacksonville, 39829 TYPES OF MATERIAL OR AID REQD REQD STATUS Color Printer 1 Jan 73 TBD Drafting Table (Part # VLT32T) 10 Jan 73 TBD Instructor Lesson Guide 3 Jan 73 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Jan 73 TBD Overhead Projector (Part # 1BC7) 1 Jan 73 TBD Student Guide 12 Jan 73 Onboard Student Worksheets 12 Jan 73 Onboard CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC: NAS North Island, 39503 TYPES OF MATERIAL OR AID REQD REQD STATUS Color Printer 1 Jan 92 TBD Drafting Table (Part # VLT32T) 10 Jan 92 TBD Instructor Lesson Guide 3 Jan 92 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Jan 92 TBD Overhead Projector (Part # 1BC7) 1 Jan 92 TBD Student Guide 12 Jan 92 Onboard Student Worksheets 12 Jan 92 Onboard CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding Certification LOCATION, UIC: MCAS Cherry Point, 45008 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Apr 94 TBD Carbon Dioxide Fire Extinguisher 1 Apr 94 TBD Color Printer 1 Apr 94 TBD Desk Top Pentium III Computer 1 Apr 94 TBD Instructor Lesson Guide 3 Apr 94 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Apr 94 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Apr 94 TBD Projector (Part # MT830PLUS) 1 Apr 94 TBD IV - 31
IV.B.2. CURRICULA MATERIALS AND TRAINING AIDS Projector Screen (Part # SB-QRT-670S) 1 Apr 94 TBD Student Guide 5 Apr 94 Onboard Student Worksheets 5 Apr 94 Onboard CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding Certification LOCATION, UIC: NAS North Island, 39503 TYPES OF MATERIAL OR AID REQD REQD STATUS 4' X 8" Whiteboard 1 Mar 96 TBD Carbon Dioxide Fire Extinguisher 1 Mar 96 TBD Color Printer 1 Mar 96 TBD Desk Top Pentium III Computer 1 Mar 96 TBD Instructor Lesson Guide 3 Mar 96 Onboard Integrated VHS Play/Record (Part # AG-520A) 1 Mar 96 TBD Projection Machine Ceiling Mounts (Part # MT1035CMKIT) 1 Mar 96 TBD Projector (Part # MT830PLUS) 1 Mar 96 TBD Projector Screen (Part # SB-QRT-670S) 1 Mar 96 TBD Student Guide 5 Mar 96 Onboard Student Worksheets 5 Mar 96 Onboard IV - 32
IV.B.3. TECHNICAL MANUALS CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC : MCAS Cherry Point, 45008 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-16 Hard copy 10 Oct 83 Onboard Nondestructive Inspection Methods CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC : NAS Jacksonville, 39829 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-16 Hard copy 10 Oct 87 Onboard Nondestructive Inspection Methods CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification Norfolk LOCATION, UIC : Norfolk Naval Shipyard, 49163 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-16 Hard copy 10 Sep 96 Onboard Nondestructive Inspection Methods CIN, COURSE TITLE: N-701-0005, Non-Destructive Inspection Technician Recertification LOCATION, UIC : NAS North Island, 39503 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-16 Hard copy 10 Jan 83 Onboard Nondestructive Inspection Methods CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task LOCATION, UIC : MCAS Cherry Point, 45008 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-16 Hard copy 5 Oct 83 Onboard Nondestructive Inspection Methods IV - 33
IV.B.3. TECHNICAL MANUALS CIN, COURSE TITLE: C-701-0006, Non-Destructive Inspection Technician Specific Task (Track N-701-0006) LOCATION, UIC : NAS Jacksonville, 39829 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-16 Hard copy 5 Oct 87 Onboard Nondestructive Inspection Methods CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task Norfolk LOCATION, UIC : Norfolk Naval Shipyard, 49163 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-16 Hard copy 5 Sep 96 Onboard Nondestructive Inspection Methods CIN, COURSE TITLE: N-701-0006, Non-Destructive Inspection Technician Specific Task LOCATION, UIC : NAS North Island, 39503 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-16 Hard copy 5 Jan 82 Onboard Nondestructive Inspection Methods CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC : MCAS Cherry Point, 45008 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 14 Jul 86 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC : NAS Jacksonville, 39829 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 14 Oct 87 Onboard Aeronautical Equipment Welding IV - 34
IV.B.3. TECHNICAL MANUALS CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification Norfolk LOCATION, UIC : Norfolk Naval Shipyard, 49163 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 14 Apr 96 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0007, Aircraft/Support Equipment Basic Welding Certification LOCATION, UIC : NAS North Island, 39503 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 14 Oct 80 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC : MCAS Cherry Point, 45008 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Jul 86 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC : NAS Jacksonville, 39829 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Oct 87 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification Norfolk LOCATION, UIC : Norfolk Naval Shipyard, 49163 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Apr 96 Onboard Aeronautical Equipment Welding IV - 35
IV.B.3. TECHNICAL MANUALS CIN, COURSE TITLE: N-701-0008, Aircraft/Support Equipment Basic Welding Recertification LOCATION, UIC : NAS North Island, 39503 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Oct 80 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC : MCAS Cherry Point, 45008 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Jul 86 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC : NAS Jacksonville, 39829 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 May 92 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification Norfolk LOCATION, UIC : Norfolk Naval Shipyard, 49163 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Apr 96 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0009, Oxyfuel/Shielded Metal Arc Welder Certification LOCATION, UIC : NAS North Island, 39503 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Nov 82 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC : MCAS Cherry Point, 45008 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Jul 86 Onboard IV - 36
Aeronautical Equipment Welding IV - 37
IV.B.3. TECHNICAL MANUALS CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC : NAS Jacksonville, 39829 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Jul 86 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification Norfolk LOCATION, UIC : Norfolk Naval Shipyard, 49163 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Apr 96 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0010, Oxyfuel/Shielded Metal Arc Welder Recertification LOCATION, UIC : NAS North Island, 39503 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 10 Nov 82 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC : MCAS Cherry Point, 45008 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-509 Hard copy 12 Jan 84 Onboard Aircraft Weapons Systems Cleaning And Corrosion Control CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC : NAS Jacksonville, 39829 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-509 Hard copy 12 Nov 77 Onboard Aircraft Weapons Systems Cleaning And Corrosion Control CIN, COURSE TITLE: N-701-0013, Aircraft Corrosion Control LOCATION, UIC : NAS North Island, 39503 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-509 Hard copy 12 Jan 92 Onboard IV - 38
Aircraft Weapons Systems Cleaning And Corrosion Control IV - 39
IV.B.3. TECHNICAL MANUALS CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC : MCAS Cherry Point, 45008 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS FED-STD-595B Hard copy 12 Oct 83 Onboard Color Used In Government Procurement MIL-F-18264D Hard copy 12 Oct 83 Onboard Finishes: Organic, Weapons Systems, Application And Control Of MIL-STD-2161A Hard copy 12 Oct 83 Onboard Paint Schemes And Exterior Markings For U.S. Navy And Marine Corps Aircraft NA 01-1A-509 Hard copy 12 Oct 83 Onboard Aircraft Weapons Systems Cleaning And Corrosion Control CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC : NAS Jacksonville, 39829 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS FED-STD-595B Hard copy 12 Jan 73 Onboard Color Used In Government Procurement MIL-F-18264D Hard copy 12 Jan 73 Onboard Finishes: Organic, Weapons Systems, Application And Control Of MIL-STD-2161A Hard copy 12 Jan 73 Onboard Paint Schemes And Exterior Markings For U.S. Navy And Marine Corps Aircraft NA 01-1A-509 Hard copy 12 Jan 73 Onboard Aircraft Weapons Systems Cleaning And Corrosion Control CIN, COURSE TITLE: N-701-0014, Aircraft Paint Touch Up and Markings LOCATION, UIC : NAS North Island, 39503 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS FED-STD-595B Hard copy 12 Jan 92 Onboard Color Used In Government Procurement MIL-F-18264D Hard copy 12 Jan 92 Onboard Finishes: Organic, Weapons Systems, Application And Control Of IV - 40
IV.B.3. TECHNICAL MANUALS MIL-STD-2161A Hard copy 12 Jan 92 Onboard Paint Schemes And Exterior Markings For U.S. Navy And Marine Corps Aircraft NA 01-1A-509 Hard copy 12 Jan 92 Onboard Aircraft Weapons Systems Cleaning And Corrosion Control CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding Certification LOCATION, UIC : MCAS Cherry Point, 45008 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 5 Apr 94 Onboard Aeronautical Equipment Welding CIN, COURSE TITLE: N-701-0025, Gas Metal Arc Welding Certification LOCATION, UIC : NAS North Island, 39503 TECHNICAL MANUAL NUMBER / TITLE MEDIUM REQD REQD STATUS NA 01-1A-34 Hard copy 5 Mar 96 Onboard Aeronautical Equipment Welding IV - 41
PART V - MPT MILESTONES COG CODE MPT MILESTONES DATE STATUS TSA Began Training at Jacksonville Jan 73 Complete TSA Began Training at North Island Oct 80 Complete TSA Began Training at Cherry Point Oct 83 Complete TSA Began Training at Norfolk Apr 96 Complete PDA Distribute Draft NTSP Jun 01 Complete OPO Approve NTSP Feb 02 Complete TSA Deliver Training Aids FY02 Pending TSA Deliver Technical Training Equipment FY02 Pending V-1
PART VI - ACTION ITEMS/ACTION REQUIRED DECISION ITEM OR ACTION REQUIRED COMMAND ACTION DUE DATE STATUS Most of the equipment listed in Part IV as Required lists the status as TBD. A more definitive status of required items should be provided. AIR 3.4.6 Open Pending Note: Due to the sheer volume of information contained in the following Action Items, the Action Required is not included. For information on each MTRR Action Required, refer to the OPNAV N789H Home Page, (http://www.avtechtra.navy.mil) or contact a NAVAIRSYSCOM, AIR 3.4.6 point of contact listed in Part VII of this NTSP. ACTION ITEM NUMBER CIN COMMAND ACTION STATUS NADEP.00MTRR.0005.1 N-701-0005 AIR 3.4.6 Pending NADEP.00MTRR.0005.2 N-701-0005 AIR 3.4.6 Pending NADEP.00MTRR.0005.3 N-701-0005 AIR 3.4.6 Pending NADEP.00MTRR.0005.4 N-701-0005 OPNAV 789 Pending NADEP.00MTRR.0005.5 N-701-0005 AIR 3.4.6 Pending NADEP.00MTRR.0005.7 N-701-0005 AIR 3.4.6 Pending NADEP.00MTRR.0007.3 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.0007.10 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.0007.11 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.0007.12 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.0007.13 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.0007.2 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.7040.02 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.0007.6A N-701-0007 AIR 3.4.6 Pending NADEP.99PMTRR.0007.1 N-701-0007 AIR 3.4.6 Pending NADEP.99MTRR.0009.1 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.0007.5 N-701-0007 AIR 3.2 Pending NADEP.99MTRR.0007.4 N-701-0007 AIR 3.4.6 Pending NADEP.99MTRR.0007.3 N-701-0007 AIR 3.4.6 Pending NADEP.99MTRR.0007.2 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.0007.4 N-701-0007 AIR 3.4.6 Pending NADEP.00MTRR.0007.6 N-701-0007 COMNAVRES Pending NADEP.00MTRR.0007.13 N-701-0008 AIR 3.4.6 Pending NADEP.00MTRR.0007.2 N-701-0008 AIR 3.4.6 Pending VI-1
PART VI - ACTION ITEMS/ACTION REQUIRED ACTION ITEM NUMBER CIN COMMAND ACTION STATUS NADEP.99MTRR.0009.1 N-701-0008 AIR 3.4.6 Pending NADEP.99MTRR.0009.3 N-701-0009 AIR 3.4.6 Pending NADEP.99MTRR.0009.2 N-701-0009 AIR 3.4.6 Pending NADEP.00MTRR.0007.2 N-701-0009 AIR 3.4.6 Pending 900.00MTRR.7040.02 N-701-0009 COMNAVRES Pending NADEP.99MTRR.0013.1 N-701-0013 AIR 3.4.6 Pending NADEP.00MTRR.0013.1 N-701-0013 AIR 3.4.6 Pending NADEP.00MTRR.0014.2 N-701-0014 AIR 3.4.6 Pending NADEP.00MTRR.0014.3 N-701-0014 AIR 3.4.6 Pending NADEP.00MTRR.0014.4 N-701-0014 AIR 3.4.6 Pending NADEP.00MTRR.0014.5 N-701-0014 AIR 3.4.6 Pending NADEP.99MTRR.0014.1 N-701-0014 AIR 3.4.6 Pending VI-2
PART VII - POINTS OF CONTACT NAME / FUNCTION / ACTIVITY, CODE / INTERNET EMAIL TELEPHONE NUMBERS CAPT Owen Fletcher COMM: (703) 604-7747 Deputy for Aviation Maintenance Programs DSN: 664-7747 CNO, N781B FAX: (703) 604-6972 fletcher.owen@hq.navy.mil CAPT Terry Merritt COMM: (703) 604-7730 Head, Aviation Technical Training Branch DSN: 664-7730 CNO, N789H FAX: (703) 604-6939 merritt.terry@hq.navy.mil AZCS Gary Greenlee COMM: (703) 604-7743 NTSP Manager DSN: 664-7743 CNO, N789H1A FAX: (703) 604-6939 greenlee.gary@hq.navy.mil Mr. Robert Zweibel COMM: (703) 602-5151 Training Technology Policy DSN: 332-5151 CNO, N795K FAX: (703) 602-5175 zweilbel.robert@hq.navy.mil AMHC David Edinger COMM: (301) 757-8141 Assistant Program Manager, Training Systems DSN: 757-8141 NAVAIRSYSCOM, PMA205-3E1 FAX: (301) 757-6945 edingerdw@navair.navy.mil Ms. Nancy Heisley COMM: (301) 757-3084 Competency Manager DSN: 757-3084 NAVAIRSYSCOM, AIR 3.4.6 FAX: (301) 342-7737 heisleyne@navair.navy.mil AEC Larry Morales COMM: (301) 757-3097 NADEP Training Manager DSN: 757-3097 NAVAIRSYSCOM, AIR 3.4.6 FAX: (301) 342-7737 moraleslr@navair.navy.mil Mrs. Pollyanna Randol COMM: (757) 836-0103 Aviation NTSP Point of Contact DSN: 863-0103 CINCLANTFLT, N-721 FAX: (757) 836-6737 randolpa@clf.navy.mil Mr. Bob Long COMM: (808) 471-8513 Deputy Director for Training DSN: 471-8513 CINCPACFLT, N70 FAX: (808) 471-8596 u70@cpf.navy.mil Mr. Steve Berk COMM: (850) 452-8919 CNET NTSP Distribution DSN: 922-8919 CNET, ETS-23 FAX: (850) 452-4853 Stephen-g.berk@cnet.navy.mil VII-1
PART VII - POINTS OF CONTACT NAME / FUNCTION / ACTIVITY, CODE / INTERNET EMAIL TELEPHONE NUMBERS CDR Erich Blunt COMM: (850) 452-4915 Aviation Technical Training DSN: 922-4915 CNET, ETE-32 FAX: (850) 452-4901 cdr-erich.blunt@cnet.navy.mil MAJ Jon Doering COMM: (703) 784-6241 Head, ACE Branch, TFS Division DSN: 278-6241 MCCDC, C5325A FAX: (703) 784-6072 doeringjg@mccdc.usmc.mil Mr. Anthony Caruso COMM: (407) 380-4807 NTSP POC, NAWC, Training Systems DSN: 960-4807 Division, 4971 FAX: (407) 380-4219 carusoan@navair.navy.mil Mr. Fernando Del Valle COMM: (619) 545-4406 Fleet Training Coordinator DSN: 735-4406 NADEP North Island, 90021 FAX: (619) 545-1827 delvallefc@navair.navy.mil Ms. Valerie Knapp COMM: (252) 464-7560 Fleet Training Coordinator DSN: 451-7560 NADEP Cherry Point, 7.2.232 FAX: (252) 464-7530 knappvg@navair.navy.mil Mr. Mike Waldroup COMM: (757) 396-4883 Fleet Training Coordinator DSN: 961-4883 Norfolk Naval Shipyard, 900T.1 FAX: (757) 396-1788 waldroupjm@nnsy.navy.mil Mr. Larry Brown COMM: (904) 542-5151 Fleet Training Coordinator DSN: 942-5151 NADEP Jacksonville, 6.0CMC FAX: (904) 542-0851 brownll@navair.navy.mil Mr. Bob Hayes COMM: (301) 737-3500 NTSP Author DSN: None Management Analysis Group Associates FAX: (301) 737-6442 hayesb@chesapeake.net Mr. Phil Szczyglowski COMM: (301) 757-8280 Competency Manager DSN: 757-8280 NAVAIRSYSCOM, AIR 3.4.1 FAX: (301) 342-7737 szczyglowspr@navair.navy.mil Mr. Bob Kresge COMM: (301) 757-1844 NTSP Manager DSN: 757-1844 NAVAIRSYSCOM, AIR 3.4.1 FAX: (301) 342-7737 kresgerj@navair.navy.mil VII-2
PART VII - POINTS OF CONTACT NAME / FUNCTION / ACTIVITY, CODE / INTERNET EMAIL TELEPHONE NUMBERS ADCS Patrick Reed COMM: (301) 757-3107 NTSP Coordinator DSN: 757-3107 NAVAIRSYSCOM, AIR 3.4.1 FAX: (301) 342-7737 reedps@navair.navy.mil VII-3