FIBER OPTIC SOLUTIONS

S T A T E O F T H E A R T F I B E R O P T I C S O L U T I O N S FIBER OPTIC SOLUTIONS C O N N E C T I V I T Y F I B E R O P T I C P E R F O R M A N C E WHEN YOUR NETWORK REQUIRES THE PERFORMANCE THAT ONLY FIBER CAN PROVIDE. When your network demands are the greatest, look to Molex Premise Networks for a complete line of fiber optic connectors and systems to meet your every fiber patching, splicing and cable management requirement. Molex is known as one of the leaders in fiber optic connectivity and the Premise Networks division has configured systems for your network utilizing state of the art technology for minimum insertion loss and flawless signal transmission. Page 44

In this section... Description Page Wallplates and Modules.............................................46 Multi-Media Interface...............................................49 601 Series.....................................................49 ModLink TM (pre-terminated plug-and-play fiber system).........................50 FMS Plus (high density/high security optical fiber patching enclosures)..............52 FMS II (rugged, high density/high security optical fiber patching enclosures)..........53 FMS Termination Drawer............................................54 Optical Fiber Patch Panels............................................54 LI-24 (wall-mount fiber enclosures)......................................55 WM-12........................................................55 Demarc Cabinets..................................................56 6-Pak Adapters...................................................57 Connectors & Adapters..............................................58 Splice Trays.....................................................59 Optical Fiber Breakout Kits...........................................60 Termination Kits..................................................60 Termination Tools.................................................63 Optical Fiber Patch Cords............................................64 Fiber Cable (Draka-Molex Cabling Systems)................................65 FLT4 TM (Test Equipment).............................................67 Page 45

Synergy TM Better Than the Sum of its Parts Synergy is an industrially designed family of wallplates, surface boxes and modular furniture outlets providing a sleek, curved and low profile appearance. Its slim, rounded contours offer an aesthetically pleasing style that fits even the most contemporary of high technology office atmospheres. The Synergy family blends optimum functionality with its unique design by offering convenient features such as: Low profile for inconspicuous network connecting Clear, concise labeling Rear-loading to reduce tampering Hinged screw caps prevent misplacement Slotted screw holes for alignment and easy removal 5 wallplate colors available The Synergy Family (Synergy products displayed in detail on pages 13 and 14) MSY-00025-** Module - Synergy MT-RJ Dimensions:.79 H x.70 W x 1.1 D (20mm x 18mm x 29mm) Shipping Weight: 1 oz. (28g) Wallplates WSY-00003-** WSY-00002-** WSY-00004-** WSY-00001-** WSY-00006-** WSY-00005-** WSY-00015-** WSY-00016-** WSY-00017-** Surface Boxes SSY-00002-** SSY-00003-** SSY-00004-** 3 Port Wallplate 4 Port Wallplate 4 Port M/M Wallplate 6 Port Wallplate 2 Port Angled Wallplate 4 Port Angled Wallplate 12 Port Double Gang Wallplate 10 Port Double Gang Wallplate 8 Port Double Gang Wallplate 2 Port Modular Surface Box 4 Port Modular Surface Box 6 Port Modular Surface Box MSY-00020-**, MSY-00021-** Dual ST MM/SM Dimensions:.79 H x 1.60 W x 1.15 D (20mm x 40mm x 29mm) Shipping Weight:.58 oz. (15g) Modular Furniture Outlets SSY-00001-** 4 Port Modular Furniture Outlet/NEMA Cutout size a minimum of 2.812 x 1.750 SSY-00005-** 3 Port Modular Furniture Outlet/TIA 569A Cutout size of 1.345-1.405 x 2.630-2.850 SSY-00007-** 4 Port Modular Furniture Outlet/TIA 569A Cutout size of 1.345-1.405 x 2.630-2.850 Accessories CSP-00013 Clear Label Holder (bag of 25) CSP-00011-** Molex Screw Cap Covers (bag of 25) CSP-00005-** Alpha Icon Tree (bag of 10) CSP-00010-** Synergy Icon Tree (bag of 10) MSY-00027-**, MSY-00029-** Synergy Duplex SC Module SM/MM Dimensions:.79 H x 1.6 W x 1.2 D (20mm x 40mm x 30mm) Shipping Weight: 1 oz. (28g) MSY-00026-**, MSY-00028-** Duplex SC SM/MM w/shutter Dimensions:.79 H x 1.6 W x 1.2 D (20mm x 40mm x 32mm) Shipping Weight: 1 oz. (28g) Synergy Fiber Modules Fiber Modules MSY-00003-** MSY-00004-** MSY-00018-** MSY-00025-** MSY-00020-** MSY-00021-** MSY-00027-** MSY-00029-** MSY-00026-** MSY-00028-** Single ST SM Module Single ST MM Module Simplex SC SM w/shutter Synergy MT-RJ Dual ST MM Dual ST SM Synergy Duplex SC Module SM Synergy Duplex SC Module MM Duplex SC SM w/shutter Duplex SC MM w/shutter Synergy Color Options: Insert color code in place of ** when ordering Synergy: 01 = Almond, 02 = White, 04 = Black, 05 = Ivory, 08 = Light Grey Page 46

Single and Double-Gang USO II TM Single and Double-Gang USO II bezels respectively hold up to three or six USO II modules (up to twelve channels). Bezels include screws, screw caps and Snapz icon trees. Modules are ordered separately. The Single-Gang USO II requires a total of up to four part numbers: One Bezel Three USO II modules or blanks The Double-Gang USO II requires up to seven part numbers: One Bezel Six USO II modules or blanks USO II Bezels WUS-00001-** WUS-00002-** WUS-00003-** WUS-00004-** USO II Fiber Modules Fiber Modules MUS-00044-** MUS-00063-** MUS-00038-** MUS-00045-** MUS-00048-** MUS-00046-** MUS-00047-** MUS-00066-** MUS-00064-** MUS-00065-** MUS-00050-** MUS-00052-** MUS-00053-** MUS-00054-** MUS-00073-** MUS-00074-** MUS-00075-** MUS-00076-** MUS-00071-** MUS-00072-** MUS-00067-** MUS-00068-** MUS-00069-** MUS-00070-** MUS-00014-** MUS-00015-** MUS-00016-** MUS-00017-** MUS-00088-** MUS-00087-** Single Gang Bezel with Alpha icons Double Gang Bezel with Alpha icons Single Gang Bezel with Telcom icons Double Gang Bezel with Telcom icons FDDI 2 ST SM 2 ST MM SC/SC SM SC/SC MM ST/SC MM ST/SC SM FDDI Angled (2U) 2 ST MM Angled (2U) 2 ST SM Angled (2U) SC/SC SM w/shutter SC/SC MM w/shutter ST/SC MM w/shutter ST/SC SM w/shutter 3 Duplex SC SM (2U) 3 Duplex SC MM (2U) 3 Duplex ST TO SC SM (2U) 3 Duplex ST TO SC MM (2U) 6 ST SM (2U) 6 ST MM (2U) 1 Duplex SC SM Angled (2U) 1 Duplex SC MM Angled (2U) 1 Duplex ST TO SC SM Angled (2U) 1 Duplex ST TO SC MM Angled (2U) 1 Duplex SC SM Angled w/shutter (2U) 1 Duplex SC MM Angled w/shutter (2U) 1 Duplex ST TO SC SM Angled w/shutter (2U) 1 Duplex ST TO SC MM Angled w/shutter (2U) Single MT-RJ Dual MT-RJ Single Gang USO II Bezel Dimensions: 4.5"H x 2.75"W x.6"d (114mm x 70mm x 15mm) Shipping Weight: 1.5 oz. (42.5g) Double Gang USO II Bezel Dimensions: 4.5"H x 4.5"W x.6"d (114mm x 114mm x 15mm) Shipping Weight: 2.5 oz. (70.9g) USO II Color Options: Insert color code in place of ** in part number when ordering. 01 = Almond, 02 = White, 04 = Black, 08 = Light Grey Page 47

USO II TM FIBER MODULES MUS-00044-** Module - FDDI Dimensions: 1.0"H x 2.0"W x 1.25"D (25mm x 50mm x 32mm) Shipping Weight: 1 oz. (28g) MUS-00065-**, MUS-00064-** Module - 2 ST SM/MM Angled (2U) Dimensions: 2.0"H x 2.0"W x 1.25"D (50mm x 50mm x 32mm) Shipping Weight: 1.5 oz. (43g) MUS-00067-**, MUS-00068-**, MUS-00069-**, MUS-00070-** Module - 1 Duplex SC SM/MM Angled (2U) Module - 1 Duplex ST TO SC SM/MM Angled (2U) Dimensions: 2.0"H x 2.0"W x 1.25"D (50mm x 50mm x 32mm) Shipping Weight: 2 oz. (57g) MUS-00063-**, MUS-00038-** Module - 2 ST SM/MM Dimensions: 1.0"H x 2.0"W x 1.25"D (25mm x 50mm x 32mm) Shipping Weight: 1 oz. (28g) MUS-00050-**, MUS-00052-**, MUS-00054-**, MUS-00053-** Module - SC/SC SM/MM w/shutter Module - ST/SC SM/MM w/shutter Dimensions: 1.0"H x 2.0"W x 1.675"D (25mm x 50mm x 43mm) Shipping Weight: 1 oz. (28g) MUS-00014-**, MUS-00015-**, MUS-00016-**, MUS-00017-** Module - 1 Duplex SC SM/MM Angled w/shutter (2U) Module - 1 Duplex ST TO SC SM/MM Angled w/shutter (2U) Dimensions: 2.0"H x 2.0"W x 1.25"D (50mm x 50mm x 32mm) Shipping Weight: 2 oz. (57g) MUS-00045-**, MUS-00048-**, MUS-00047-**, MUS-00046-** Module - SC/SC SM/MM Module - ST/SC SM/MM Dimensions: 1.0"H x 2.0"W x 1.675"D (25mm x 50mm x 43mm) Shipping Weight: 1 oz. (28g) MUS-00073-**, MUS-00074-**, MUS-00075-**, MUS-00076-** Module - 3 Duplex SC SM/MM (2U) Module - 3 Duplex ST TO SC SM/MM (2U) Dimensions: 2.0"H x 2.0"W x 1.25"D (50mm x 50mm x 32mm) Shipping Weight: 2.5 oz. (71g) MUS-00088-** Module - Single MT-RJ Dimensions: 1.0 H x 2.0 W x 1.1 D (25mm x 50mm x 28mm) Shipping Weight: 1oz. (28g) MUS-00066-** Module - FDDI - Angled (2U) Dimensions: 2.0"H x 2.0"W x 1.675"D (50mm x 50mm x 43mm) Shipping Weight: 2.0 oz. (57g) MUS-00071-**, MUS-00072-** Module - 6 ST SM/MM (2U) Dimensions: 2.0"H x 2.0"W x 1.25"D (50mm x 50mm x 32mm) Shipping Weight: 2.5 oz. (71g) Page 48 MUS-00087-** Module - Dual MT-RJ Dimensions: 1.0 H x 2.0 W x 1.1 D (25mm x 50mm x 28mm) Shipping Weight: 1oz. (28g)

MMI Multi Media Interface The MMI and MMI-R are compact wall-mounted units for storing and protecting optical fiber. The internal storage spool easily holds 1.5 meters of up to 12 fibers with 900 micron buffers. Both units accept up to six USO II modules (refer to pages 47 and 48) and can be configured using a combination of fiber, UTP, ST TM and coax adapters, placing all outlets in one centrally located unit. This makes MMI an ideal fiber-to-thedesk consolidation point for clustered furniture. The MMI has a sturdy snap-on plastic cover and is available in three attractive colors: almond, white and light grey. The MMI-R is a rugged version of the MMI with a grey powder-coated steel cover that overhangs and protects the lower module positions. The metal cover is attached with allen-type cap screws. Both units include the cover, base, cable ties and icon labels. WFR-00016-02 MMI Dimensions: 7.75"H x 6.25"W x 2.25"D (197mm x 159mm x 57mm) Shipping Weight: 11.5 oz. (326g) WFR-00016-01 WFR-00016-02 WFR-00016-08 WFR-00017 MMI (Plastic Cover) Almond MMI (Plastic Cover) White MMI (Plastic Cover) Light Grey MMI-R (Graphite Grey Metal Cover) 601 Fiber Series The 601 Fiber series wall mount system interface products are compact units for optical fiber. The ST and Duplex SC versions have a capacity for up to either 6 or 8 ports. WFR-00017 MMI-R Dimensions: 8.75"H x 6.25"W x 2.25"D (222mm x 159mm x 57mm) Shipping Weight: 14.5 oz. (411g) The enclosures are made of white rugged plastic and while having a low profile, provide the proper internal fiber management to ensure the integrity of the optical network. There is also provision for a user-supplied seal for added security. The 601 Fiber series is compatible for splicing and direct terminations. The splice holders accept up to 8 fusion splice protectors or mechanical splices. WFR-00009-02 WFR-00010-02 WFR-00011-02 WFR-00015-02 WFR-00024-02 WFR-00025-02 WFR-00026-02 WFR-00027-02 WFR-00028-02 WFR-00029-02 WFR-00030-02 6 Ports, ST, unloaded 6 Ports, ST, MM, loaded 6 Ports, ST, SM, loaded 2 MTP Loaded 12/24 Fiber 8 Ports, ST, unloaded 8 Ports, ST, MM, loaded 8 Ports, ST, SM, loaded 8 Ports, Duplex SC, unloaded 8 Ports, Duplex SC, MM, loaded 8 Ports, Duplex SC, SM, loaded 6 Ports, Accepts Simplex SC or MTRJ (2 Fibers/Port) Couplers unloaded The MMI and MMI-R share a common base which has special provision for storing and protecting optical fiber. Both units can be wall-mounted on a US 1 or electrical box. ST TM is a trademark of Lucent Technologies Page 49 601 Series Dimensions: 7.25"H x 5.0"W x 1.5"D (185mm x 130mm x 40mm) Shipping Weight: 11 oz. (320g)

ModLink TM Installing fiber-optic systems is quick, easy and cost-effective with ModLink. Because field termination is not required, there is no need for special termination tools and training. Simply plug in the cable and the link is operational. This is also an excellent solution for disaster recovery and fast-track installs. ModLink Cable supplied with a factory assembled pulling eye and protective sleave. ModLink cable is available in five meter increments. If your installation is measured in foot lengths, convert your measurements to meter lengths using this formula: Foot Length 3.281 = Meter Length Then, convert the meter length to 5 meter increments, as follows: Meter Length 5 = Number of 5 Meter Increments Required Replace XXX in part number with number of 5 meter increments Example: CFR-03003 = 15 meters CFR-03004 = 20 meters ModLink cables and cassettes are factory tested and shipped with complete optical test results for each unit Multi-fiber ribbon cable terminations put all fibers in one MTP connector for easier cable management Rack or wall-mounted enclosures for multiple applications including premises backbones, consolidation points and OFTD ModLink features compact 6- and 12-fiber 62.5/50µm MM or SM plenum-rated ribbon cables. The cables are factory-terminated on both ends with multi-fiber MTP connectors and a built-in protective pulling eye. SM is angle-polished to reduce back reflection. MM is flat polished. ModLink cassettes are self-contained fiber-optic patching enclosures. They convert the MTP interface to an individual standard ST, SC, FC or MT-RJ coupler. Cassettes are available in 6, 12 and 24-fiber versions and can be rack or wall-mounted with the correct enclosure or bracket. ModLink Cable 86293-3XXX 86293-2XXX 86293-6XXX 86293-7XXX CFR-03XXX CFR-04XXX 6-Fiber 62.5 ModLink Cable MM 12-Fiber 62.5 ModLink Cable MM 12-Fiber 50µm ModLink Cable MM 6-Fiber 50µm ModLink Cable MM 6-Fiber ModLink Cable SM 12-Fiber ModLink Cable SM 16 x 16 ModLink wall mount enclosure depicted loaded and closed. 4U ModLink Enclosure populated with 12 Port MT-RJ Adapter Cassettes Dimensions: 6.75 H x 19 W x 12 D Page 50 MTP is a registered trademark of US Conec Ltd.

NO. OF MTP NO. OF FRONT ON BACK FIBERS/MTP CONNECTOR ModLink Cassettes PFR-00011 62.5MM MTP6/ST 1 6 ST PFR-00012 62.5MM MTP12/ST 1 12 ST PFR-00013 62.5MM 2MTP6/ST 2 6 ST PFR-00017 SM MTP6/ST 1 6 ST PFR-00018 SM MTP12/ST 1 12 ST PFR-00019 SM 2MTP6/ST 2 6 ST PFR-00020 62.5MM MTP6/DSC 1 6 Duplex SC PFR-00021 62.5MM MTP12/DSC 1 12 Duplex SC PFR-00022 62.5MM 2MTP6/DSC 2 6 Duplex SC PFR-00026 SM MTP6/DSC 1 6 Duplex SC PFR-00027 SM MTP12/DSC 1 12 Duplex SC PFR-00028 SM 2MTP6/DSC 2 6 Duplex SC PFR-00029 62.5MM MTP6/MT-RJ 1 6 MT-RJ PFR-00030 62.5MM MTP12/MT-RJ 1 12 MT-RJ PFR-00031 62.5MM 2MTP6/MT-RJ 2 6 MT-RJ PFR-00032 62.5MM 2MTP12/MT-RJ 2 12 MT-RJ PFR-00033 62.5MM 4MTP6/MT-RJ 4 6 MT-RJ PFR-00039 SM MTP6/MT-RJ 1 6 MT-RJ PFR-00040 SM MTP12/MT-RJ 1 12 MT-RJ PFR-00041 SM 2MTP6/MT-RJ 2 6 MT-RJ PFR-00042 SM 2MTP12/MT-RJ 2 12 MT-RJ PFR-00043 SM 4MTP6/MT-RJ 4 6 MT-RJ PFR-00044 62.5MM MTP6/FC 1 6 FC PFR-00045 62.5MM MTP12/FC 1 12 FC PFR-00046 62.5MM 2MTP6/FC 2 6 FC PFR-00047 50MM MTP6/FC 1 6 FC PFR-00048 50MM MTP12/FC 1 12 FC PFR-00049 50MM MTP6/FC 2 6 FC PFR-00050 SM MTP6/FC 1 6 FC PFR-00051 SM MTP12/FC 1 12 FC PFR-00052 SM 2MTP6/FC 2 6 FC PFR-00053 SM MTP12/FC APC 1 12 FC APC NO. OF CASSETTES COLOR Enclosures and Brackets RFR-00071 1U 19 Open Bracket 2 Grey RFR-00072 1U 19 Enclosure 2 Grey RFR-00073 4U Enclosure/Steel Door 12 Grey RFR-00074 4U Enclosure/Lexan Door 12 Grey WFR-00039 16"x16" Wall Mount 6 Champagne PFR-00012 62.5MM MTP12/ST ModLink Cassette Dimensions: 1.25 H x 6.5 W x 7 D (32mm x 165mm x 178) Shipping Weight: 14 oz. (397g) PFR-00021 62.5MM MTP12/DSC ModLink Cassette Dimensions: 1.25 H x 6.5 W x 7 D (32mm x 165mm x 178) Shipping Weight: 14 oz. (397g) PFR-00040 SM MTP12/MT-RJ ModLink Cassette Dimensions: 1.25 H x 6.5 W x 7 D (32mm x 165mm x 178) Shipping Weight: 14 oz. (397g) MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ MT-RJ 1U 19 Open Bracket shown loaded 1U 19 Enclosure Page 51 PFR-00051 SM MTP12/FC ModLink Cassette Dimensions: 1.25 H x 6.5 W x 7 D (32mm x 165mm x 178) Shipping Weight: 14 oz. (397g)

FMS Plus FMS Plus is a series of configurable patching and/or splicing units that are available in seven styles. The FMS plus is shipped completely assembled including a configurable 6-Pak panel. All you need to do is mount the unit on a rack and snap in 6-Pak/Adapter Plates (refer to page 57) and splice trays (refer to page 59), each purchased separately. Using 6-Paks allows installation of multiple connector types within the same enclosure. Each 4U frame accepts 12 6-Paks. All units are available with either a Lexan door or a steel door each style is fully lockable. RFR-00027, RFR-00031, RFR-00034, RFR-00038 4U FMS Plus Dimensions: 6.75 H x 16 W x 12 D (171mm x 406mm x 305mm) Shipping Weight: 19 lbs. (8.6kg) Fully configurable using 6-Pak/Adapter plates Accommodates multiple connector and fiber types within a single enclosure Available with fully lockable steel doors where security is a primary concern Or, smoked Lexan doors fully lockable are perfect where aesthetics are paramount Easy to use and apply labeling Holds up to six Universal Splice Trays which adapt for either fusion or mechanical splices Splicing and patching can occur within the same unit (patching in the top, splicing in the bottom) Low profile design allows a maximum of fiber terminations in a minimum of rack space Multiple cable access holes with grommets to protect incoming cables and caps for unused holes RFR-00027 RFR-00028 RFR-00031 RFR-00033 RFR-00034 RFR-00035 RFR-00038 RFR-00040 FMS Plus 72 Fiber Patch Panel with Metal Door (4U) FMS Plus 72 Fiber Patch/Splice Panel with Metal Door (8U) FMS Plus 72 Fiber Splice Panel with Metal Door (4U) FMS Plus 144 Fiber Patch Panel with Metal Door (8U) FMS Plus 72 Fiber Patch Panel with Smoked Plexi Door (4U) FMS Plus 72 Fiber Patch/Splice Panel with Smoked Plexi Door (8U) FMS Plus 72 Fiber Splice Panel with Smoked Plexi Door (4U) FMS Plus 144 Fiber Patch Panel with Smoked Plexi Door (8U) RFR-00028, RFR-00033, RFR-00035, RFR-00040 8U FMS Plus Dimensions: 13.5 H x 16 W x 12 D (343mm x 406mm x 305mm) Shipping Weight: 30 lbs. (13.6kg) Page 52

FMS II FMS II is a fully-enclosed optical patch panel and integral cable management unit that is suitable for high-density applications or where a high level of security and protection is required. A clear Lexan cover protects the swing-away patch field in the front and a rugged graphite grey powder-coated steel enclosure protects the incoming cable at the rear. Each FMS II enclosure accepts 12 6-Paks (refer to page 57). Where rear access is necessary, the back panel opens with two quarter-turn screws or the back cover can be lifted off by removing four corner screws. FMS II can be flush mounted or non-flush mounted, making it the most versatile fiber management product available. Includes rack-mounting screws, cable management rings, adjustable mounting ears, cable ties and labeling. FMS IIS FMS IIS is a ruggedized version of the FMS II and is also suitable for high-density applications or where a high level of security and protection is required. It provides all of the features of the FMS II plus a rugged steel front door in place of the Lexan door. Each FMS IIS enclosure accepts 12 6-Paks (refer to page 57). In addition, FMS IIS comes with keyed locks for the front and rear doors for added security. FMS IIS uses the same patch panel inserts as FMS II, providing up to 72 ports in only three 19" rack positions. Includes rack mounting screws, cable management rings, adjustable mounting ears, cable ties and labeling. 17.B146G 17.B154G FMS II Fiber Management System (Lexan door) FMS IIS (Steel Door) FMS II Configurable Panel Inserts Molex Premise Networks Configurable Panel Inserts are used with the FMS II and FMS IIS. They accept 6-Pak plates (refer to page 57) for custom-configuring with any combination of SC or ST adapters and are available in 48 and 72-port versions. Use blank plates for unoccupied positions. FMS II Panel Inserts 30.B026G 48-Port Configurable Panel Insert unloaded 30.B034G 72-Port Configurable Panel Insert unloaded 17.B146G FMS II Dimensions: 5.25"H x 19.0"W x 10"D (133mm x 483mm x 254mm) Shipping Weight: 11 lbs. (5kg) 17.B154G FMS IIS Dimensions: 5.25"H x 19.0"W x 10"D (133mm x 483mm x 254mm) Shipping Weight: 11 lbs. (5kg) 30.B026G 48-Port Configurable Panel Insert Dimensions: 4.79"H x 16.34"W x.06"d (121mm x 415mm x 2mm) Shipping Weight: 1 lb. (454g) 30.B034G 72-Port Configurable Panel Insert Dimensions: 4.79"H x 16.34"W x.06"d (121mm x 415mm x 2mm) Shipping Weight: 1 lb. (454g) Page 53

17.B155G 24-Port Termination Drawer-(show loaded) Dimensions: 1.75"H x 19.0"W x 12.5"D (45mm x 483mm x 318mm) Shipping Weight: 9 lbs. (4kg) 24-Port FMS Termination Drawer The 24-Port FMS Termination Drawer is a 1U configurable rack mount unit for storing and terminating incoming fiber cable. The cabinet is made of rugged 16-gauge steel with a graphite grey powdercoat finish. The front of the drawer slides open to reveal a recessed configurable patch panel that accepts up to four 6-Paks or Adapter plates (refer to page 57). Behind the configurable panel is a fully-enclosed cable management area. The 24-Port FMS comes with a keyed lock to provide a compact secure termination drawer. Includes rack mounting screws, cable management ring, labeling and split tubing to protect incoming cable. 17.B155G 24-Port FMS Termination Drawer Optical Fiber Patch Panels The 24 Port ST Panel is an economical 1U panel for rack mounted optical fiber patching. It comes preloaded with 12 or 24 high quality ST adapters in singlemode and multimode versions. 30.B010G, 30.B012G, 30.B011G ST* Panel Dimensions: 1.75"H x 19"W x.75"d (44mm x 483mm x 19mm) Shipping Weight: 1 lb. 7.5 oz. (665g) 30.B015G, 30.B040G SC Panel Dimensions: 1.75"H x 19"W x.75"d (44mm x 483mm x 19mm) Shipping Weight: 1 lb. 5 oz. (595g) The 24 Port SC Panel is available loaded with 12 duplex SC adapters, suitable for singlemode or multimode. It may also be purchased half loaded. In addition, Molex Premise Networks now provides shuttered SC and ST to SC panels. 30.B010G 30.B012G 30.B011G 30.B014G 30.B013G 30.B015G 30.B040G RFR-00016 RFR-00017 30.B016G 30.B037G 30.B035G 30.B039G RFR-00018 RFR-00019 30.B036G 30.B038G 24 Port ST Panel - Unloaded 24 Port ST Panel - MM 24 Port ST Panel - SM 12 Port ST Panel - MM 12 Port ST Panel - SM 24 Port SC Panel - SM 24 Port SC Panel - MM 24 Port Shuttered SC Panel - SM 24 Port Shuttered SC Panel - MM 12 Port SC Panel -SM 12 Port SC Panel - MM 24 Port ST to SC Panel - SM 24 Port ST to SC Panel - MM 24 Port Shuttered ST to SC Panel - SM 24 Port Shuttered ST to SC Panel - MM 12 Port ST to SC Panel - SM 12 Port ST to SC Panel - MM 30.B035G, 30.B039G ST to SC Panel Dimensions: 1.75"H x 19"W x.75"d (44mm x 483mm x 19mm) Shipping Weight: 1 lb. 7.5 oz. (665g) Page 54

LI-24 The LI-24 is a configurable, wall-mounted, optical fiber interconnect unit. The unit accepts up to four 6-Pak plates (refer to page 57) that are available with high-quality singlemode or multimode adapters (sold separately). Each LI-24 comes complete with internal fiber management rings, cable ties and a unique patch cord organizer block that is invaluable for arranging the outgoing cables safely without strain or pressure. There is an optional clear patch cord protection shield and each fiber can be individually labeled. The LI-24 is made of 16-gauge steel in graphite grey or champagne powdercoated finish. 15.B016G LI-24 - Grey WFR-00019 LI-24 - Champagne 15.B0210 Organizer Blocks (10 per Bag) 30.B0330 Patch Cord Protection Shield 15.B016G LI-24 (Grey) Dimensions: 8.0"H x 9.875"W x 3.0"D (203mm x 251mm x 76mm) Shipping Weight: 4 lbs. 6.5 oz. (2kg) Two LI-24s, in tandem, provide a perfect transition point from outdoor to indoor cable. WM-12 The WM-12 is a wall-mounted enclosure that accepts up to six single or three double Molex Premise Networks modules providing up to eighteen fiber ports in a minimum of space. This lockable 16-gauge steel unit is the recommended solution where a high level of security is required. The WM-12 is available in powdercoated grey or champagne finishes. The inside of the WM-12 has an integral configurable panel that accepts USO II Modules (refer to pages 47 and 48). By loading the panel with triple-duplex SC or ST modules, the unit will accommodate 18 fibers. Modules may be mixed fiber, UTP, STP and coax, making this the most versatile and compact wall mount enclosure for mixed media. WFR-00018 WM-12 Wall Mount Fiber Box Dimensions: 6.5 H x 11.5 W x 6.625 D (165mm x 292mm x 67mm) Shipping Weight: 4 lb. 7.5 oz. (2kg) The back wall of the WM-12 has cable management clips for routing cable to the USO II modules. This design guarantees that all of the media will be protected and properly managed, with special attention paid to the minimum bend radius requirements of the optical fiber. WFR-00018 WFR-00020 WM-12 Wall Mount Fiber Box - Grey WM-12 - Champagne Molex Premise Networks recommends that all inside plant fiber have a 900µ buffer coating. This fiber may be terminated in the back of the patch panels and inside the WM-12 without the addition of breakout kits or the need for splicing. This installation policy eliminates a potential failure point and significant labor and material cost. Remember: properly selected and installed passive fiber components are highly dependable and virtually maintenance-free. The WM-12 (shown with cover removed) is recommended for higher security applications of up to 18 fibers. Page 55

Patch/Splice Demarc Cabinets Molex Premise Networks Patching/Splicing Demarc cabinets provide a central point for interconnecting and/or splicing fiber optic cables. Each includes an integral panel that accepts 6-Pak/Adapter plates (refer to page 57) for field configuring the units for a variety of connector types including the most commonly used ST and SC connectors the 36P holds six 6-Paks and the 72P holds twelve 6-Paks. When using the Demarc units for splicing, order the splice tray holder and Universal Splice Trays separately (refer to page 59). The cable management areas (left side) of each unit includes a keyed lock. If you require a lock on the right side (patch field), purchase an additional keyed lock kit. Doors are removable for easy installation of 6-Paks and Splice Trays. WFR-00022 36P Patch/Splice Demarc Cabinet Dimensions: 14.0"H x 14.0"W x 3.5"D (256mm x 356mm x 89mm) Shipping Weight : 11 lb. (5kg) All locks are identical. WFR-00022 WFR-00023 36P Patch/Splice Demarc Cabinet 72P Patch/Splice Demarc Cabinet Optional Accessories AFR-00110 72P Splice Tray Holder (holds 6 trays) AFR-00001 Universal Splice Tray 35.B0130 Keyed Lock Kit AFR-00144 Cable Clamp 20mm - cable diameter 4-8mm AFR-00145 Cable Clamp 20mm - cable diameter 7.5-10mm AFR-00146 Cable Clamp 20mm - cable diameter 9.5-13.2mm AFR-00147 Cable Clamp 25mm - cable diameter 13-18mm WFR-00023 72P Patch/Splice Demarc Cabinet (Shown loaded including Splice Tray Holder) Dimensions: 16.0"H x 16.0"W x 4.8"D (406mm x 406mm x 122mm) Shipping Weight: 13 lb. (5.9kg) Page 56

6-Pak Adapter Plates Molex Premise Networks makes it easy to field configure fiber optic products by offering an extensive line of 6-Pak and Adapter Plates. The plates are loaded with high quality SC, ST, FDDI and ESCON adapters. No tools are required the plates install with a simple snap rivet, making installation or changes simple. AFR-00111 6-Pak ST - SM AFR-00112 6-Pak ST - MM AFR-00159 6-Pak MT-RJ SM/MM AFR-00160 6-Pak ST - unloaded - 4/pkg AFR-00113 6-Pak ST to SC SM AFR-00114 6-Pak ST to SC SM Shuttered AFR-00115 6-Pak ST to SC MM AFR-00116 6-Pak ST to SC MM Shuttered AFR-00117 6-Pak SC SM (Blue) AFR-00118 6-Pak SC SM (Blue) Shuttered AFR-00119 6-Pak SC MM (Beige) AFR-00120 6-Pak SC MM (Beige) Shuttered AFR-00121 6-Pak Blanks - 4/pkg 15.B0394 Adapter Plate ST to FC MM 15.B0404 Adapter Plate FC to FC SM 15.B0324 Adapter Plate ST to ESCON SM 15.B0284 Adapter Plate ST to ESCON MM 15.B0314 Adapter Plate ST to FDDI SM 15.B0294 Adapter Plate ST to FDDI MM AFR-00111, AFR-00112 6-Pak ST - SM/MM Dimensions: 3.375 H x 1.312 W x.6 D (86mm x 33 mm x 15mm) Shipping Weight: 2 oz. (56g) AFR-00117, AFR-00119, AFR-00113, AFR-00115 6-Pak SC - SM/MM, 6-Pak ST to SC -SM/MM Dimensions: 3.35 H x 1.312 W x 1.1 D (86mm x 33 mm x 28mm) Shipping Weight: 2 oz. (56g) 6-Pak/Adapter Plates are used in the following products: FMS Plus High-Density Patching/Splicing (page 52) Configurable Panel Inserts (FMS II and FMS IIS) (page 53) 24-Port FMS Termination Drawer (page 54) LI-24 (page 55) Fiber Patch/Splice Demarc Cabinets (page 56) When using SC adapters in your installation, always follow the keying and color-coding requirements of ANSI/ EIA/TIA 568A. AFR-00118, AFR-00120, AFR-00114, AFR-00116 6-Pak SC - SM/MM with Shutter 6-Pak ST to SC - SM/MM with Shutter Dimensions: 3.375 H x 1.312 W x 1.1 D (86mm x 33 mm x 29mm) Shipping Weight: 2 oz. (56g) AFR-00159 6-Pak MT-RJ SM/MM Dimensions: 3.375 H x 1.312 W x 1.1 D (86mm x 33 mm x 28mm) Shipping Weight: 2 oz. (56g) ESCON is a registered trademark of IBM Corp. AFR-00121 Blank Plate Dimensions: 3.375 H x 1.312 W x.43 D (86mm x 33 mm x 11mm) Shipping Weight (Bag of 4): 2 oz. (56g) Page 57 15.B0314, 15.B0294 ST to FDDI Plate - SM/MM Dimensions: 3.375 H x 1.312 W x 2.0 D (86mm x 33 mm x 53mm) Shipping Weight: 2 oz. (56g)

Connectors and Adapters Molex Premise Networks offers a complete line of high-quality multimode and singlemode fiber optic connectors. ST, SC and LC connectors are available in metal body or plastic body with zirconia ceramic ferrules. Adapters for the ST and SC are available with SC duplex adapters color-coded per TIA/EIA 568A specifications. 84.B0020 Duplex SC Adapter Dimensions:.37 H x 1.12 W x 1.08 D (9mm x 28mm x 27mm) Shipping Weight: 1oz. (28g) 84-5-STA-DM, 84-5-STB-DM MM/SM ST Adapter Shipping Weight: 1oz. (28g) 86066-0000 Duplex SC Connector w/shutter Dimensions:.43 H x 1.12 W x 1.08 D (11mm x 28mm x 27mm) Shipping Weight: 1oz. (28g) AFR-00150, AFR-00151 MT-RJ Connector Dimensions: 2 L x.37 W x.75 D (50mm x 9.5mm x 19mm) Shipping Weight:.05 oz. (15g) FERRULE MATERIAL JACKET DIAMETER ACTION COLOR 86063-0000 SC Connector MM Simplex Zironia Polymer 3.0mm Heat Epoxy Blue 86063-0060 SC Connector MM Simplex Zirconia Polymer 3.0mm Heat Epoxy Beige 86063-5000 SC Connector SM Simplex Zirconia Polymer 3.0mm Heat Epoxy Blue 86063-3560 SC Connector MM Simplex Zirconia Polymer.9mm Heat Epoxy Beige 86063-5500 SC Connector SM Simplex Zirconia Polymer.9mm Heat Epoxy Blue 86010-0200 ST Connector MM Simplex Zirconia Polymer 2.4 and 3.0mm Heat Epoxy 86010-5200 ST Connector SM Simplex Zirconia Polymer 2.4 and 3.0mm Heat Epoxy 86012-0200 ST Connector MM Simplex Zirconia Metal 2.4 and 3.0mm Heat Epoxy 86012-5200 ST Connector SM Simplex Zirconia Metal 2.4 and 3.0mm Heat Epoxy 86012-0500 ST Connector MM Simplex Zirconia Metal.9mm Heat Epoxy 86012-5500 ST Connector SM Simplex Zirconia Metal.9mm Heat Epoxy 86030-0200 FDDI Connector MM Duplex Zirconia Polymer Zipcord Heat Epoxy Black 84.B0020 SC/SC Adapter SM Duplex PB* Polymer NA** NA Blue 84-5-STA-DM ST/ST Adapter MM Simplex Polymer Polymer NA NA 84-5-STB-DM ST/ST Adapter SM Simplex PB Metal NA NA 86066-0000 SC Connector MM Duplex Zirconia Polymer 3.0mm Heat Epoxy Beige 86066-5000 SC Connector SM Duplex Zirconia Polymer 3.0mm Heat Epoxy Blue 86102-0000 MT-RJ Adapter NA Polymer NA NA Black 86167-0110 SC/SC Adapter-Snap Mount MM Duplex PB Polymer NA NA Beige 86167-1110 SC/ST Adapter-Snap Mount MM Duplex PB Polymer NA NA Beige 86167-0100 SC/SC Adapter-Snap Mount SM Duplex PB Polymer NA NA Blue 86166-0210 Shutter Assembly-Duplex NA Polymer NA NA Beige 86166-0200 Shutter Assembly-Duplex NA Polymer NA NA Blue AFR-00150 MT-RJ Connector (Prepolished) MM (62.5) Duplex Composite Polymer.9mm Spring Lock Black AFR-00168 MT-RJ Connector (Prepolished) AFR-00151 MM (50) Duplex Composite Polymer.9mm Spring Lock Black MT-RJ Connector (Prepolished) SM Duplex Composite Polymer.9mm Spring Lock Black 86024-3500 Simplex LC MM Connector Zirconia Plastic 900µm Heat Epoxy Beige 86024-5500 Simplex LC SM Connector Zirconia Plastic 900µm Heat Epoxy Blue 86025-3300 Duplex LC MM Connector Zirconia Plastic 2.0mm Heat Epoxy Beige 86025-5300 Duplex LC SM Connector Zirconia Plastic 2.0mm Heat Epoxy Blue 86124-0010 Simplex LC MM Adapter PB Plastic NA NA Beige 86124-1000 Simplex LC SM Adapter Zirconia Plastic NA NA Blue 86125-0110 Duplex LC MM Adapter PB Plastic NA NA Beige 86125-1100 Duplex LC SM Adapter Zirconia Plastic NA NA Blue *PB indicates Phosphor Bronze **NA indicates Not Applicable. Page 58

Xpress Termination Connectors Xpress Termination connectors provide quick, low cost and reliable terminations for fiber optic LANs. Xpress Termination Connectors are packaged in a plastic shell that can be used as a holder during termination. Each kit includes 12 Xpress Termination Connectors, adhesive, one vial of accelerator and quick termination procedures. (refer to page 60 for termination kits) Installs in about two minutes no curing oven required No electrical power required for termination One part adhesive requires no mixing or applicator Consistent results with minimum training Includes 900µm and 3mm boots Zirconia ferrule 86000-2000, 86000-2100 Xpress Anarobic Termination Kit Shipping Weight: 2 oz. (56g) 86000-2000 Xpress Anarobic Termination ST Connectors MM (12 per pack) 86000-2100 Xpress Anarobic Termination SC Connectors MM (12 per pack) Universal Splice Tray Molex Premise Networks Universal Splice Tray is a unique configurable enclosure for both mechanical and fusion splices. Each tray includes two fusion splice sleeves and two mechanical splice sleeves. Loose tube cable is routed into and out of the tray through adjustable tube grips located at each corner. These grips eliminate the need for separate cable ties and, being adjustable, are easily tightened and loosened preventing over-compression of the loose tube cable. AFR-00001 Universal Splice Tray Splice Trays may be mounted with Splice Cabinets (refer to page 56) AFR-00001 Universal Splice Tray Dimensions: 5.625 H x 3.75 W x 0.5 D (143mm x 95mm x 13mm) Shipping Weight: 3.5 oz. (99g) Ultrasplice TM Mechanical Splice The Ultrasplice Mechanical Splice is a high-performance, fully-mechanical fiber optic splice that accepts any combination from 250-900 micron buffers. It has a visible glass capillary alignment member that is pre-loaded with index matching gel, so the installer can inspect the fiber location during installation. This splice is suitable for most installation requirements (emergency or permanent) and does not require additional fixtures or special tools to install. 91.B0210 Ultrasplice Splice Kit 91.B0110 Ultrasplice MM Mechanical Splice 91.B0120 Ultrasplice SM Mechanical Splice 91.B0110, 91.B0120 Ultrasplice Mechanical Splice Dimensions: 1.75 length x.25 diameter (40mm x 5.7mm) Shipping Weight: 1 oz. (28g) Ultrasplice Kit includes: 1 Lighted magnifier/ 1 Scissors for Kevlar holder assembly 1 Package of cleaning pads 1 Battery pack with switch 1 Alcohol bottle 1 Pocket cleaver 1 Carry case/workstation 1 No-Nik buffer stripper 1 Installation video 1 Wire stripper Ultrasplice TM is a trademark of Advanced Custom Applications, Inc. Kevlar is a registered trademark of E.I. dupont denamours & Co. Inc. Page 59

Optical Fiber Breakout Kits Molex Premise Networks Breakout Kits are used on multi-fibers-per-tube loose tube cables to modify the cable for direct termination. Each kit breaks out 250 µm fibers from a multifiber loose tube into individual 900 µm buffer tubes. The fibers can then be terminated using the connector manufacturer s recommended termination procedures for 900 µm tight-buffered fibers. 91.B0610, 91.B0620, 91.B0630, 91.B0640 Optical Fiber Breakout Kit Shipping Weight: 1 oz. (28g) Optical Fiber Breakout Kits 91.B0610 4 Fibers Per Tube Breakout Kit 91.B0620 6 Fibers Per Tube Breakout Kit 91.B0630 8 Fibers Per Tube Breakout Kit 91.B0640 12 Fibers Per Tube Breakout Kit Optical Fiber Termination Kits & Components Fiber optic connector performance is dependent upon high quality terminations. In order to achieve the best possible connector performance, Molex Premise Networks offers a variety of termination kits, tools and expendable materials (epoxy, lapping film, etc.) to ensure high-quality, quick and reliable terminations. Our termination kits include everything necessary for the efficient installation of standard Molex style ST and SC connectors. Each consumables kit is sufficient for approximately 100 connectors, unless otherwise stated. 86779-0000 XpressTerm SC Termination Kit 86719-0000 XpressTerm ST Termination Kit 86719-5000 XpressTerm Consumables Kit AFR-00154 MT-RJ Table Top Termination Tool AFR-00158 MT-RJ Polishless Termination Kit 86710-0000 Epoxy Termination Kit 110V ST 86763-0000 SC Termination Tool Kit with 110V/60Hz Curing Oven 86710-5000 Consumables Kit ST/SC 91.B0210 Ultrasplice Splice Kit (Contains No Splices) Kit contents outlined on pages 61 and 62. 86719-0000, 86779-0000 Xpress Term ST/SC Termination Kit Shipping Weight: 3 lbs. 11 oz. (1316g) Page 60

TERMINATION, CONSUMABLES AND SPLICE KIT CONTENTS FIBER OPTIC SOLUTIONS XpressTerm SC and ST Termination Kits (86779-0000, 86719-0000) Enclosed in a padded nylon case with Velcro closure all around, the XpressTerm SC and ST Termination kits include the following items: 1 Dispenser Bottle with Pump 1 Stripper, No Nick, NN254 1 Jacket Stripper 1 Cutter, Kevlar & Cable 1 ST/SC/FC/FDDI Microscope Assembly 1 ST/SC Polishing Tool 1 ST or SC Connector Crimp Tool 1 ST or SC Xpress Termination Procedure 1 Red Rubber Pad (4 x 8.5 ) 1 Foam Pad (4 x 8 ) 1 Cleaving Tool (universal) 1 Holder for ST/SC Boot Assembly 1 Xpress Term Consumables Kit Xpress Term Consumables Kit (86719-5000) Includes the following items: 1 Lens Cleaning Tissue 50 sheets (4 x 6 each) 1 Lapping Film 0.5 micron 20 sheets (3 x 8 each) 1 Lapping Film 1.0 micron 20 sheets (3 x 8 each) 1 Lapping Film 5 micron 5 sheets (3 x 8 each) Epoxy Termination Kit 110V ST (86710-0000) Suitcase-type kits, each including either 1 110 Volt Curing Oven or 1 220 Volt Curing Oven And the following items: 1 Polishing Tool 1 Cleaving Tool 1 Retaining Nut Fixture 1 Curing Oven and Fixtures 1 Stripping Template 1 Stripper, No Nik (.010) 1 Stripper, Buffer Tube 1 Jacket Stripper 1 Cutter, Kevlar and Cable 1 Dispenser Bottle (4 oz.) 3 Polishing Plates 1 Microscope, 100X 1 Consumables Kit (see p/n 93.B0080 for contents) 1 Connector Assembly Procedure MT-RJ Polishless Termination Kit (AFR-00158) Each kit allows SM and MM terminations and includes the following items: 1 900 um Micro-Stripper 1 250 um Micro-Stripper 1 Cleaver 1 Ceramic Kevlar Cutter 1 Buffer Tube Stripper 1 Loctite 4203 Prism Adhesive 20g tube 1 MT-RJ Table Top Termination Tool 1 Package of Pre-Saturated Alcohol Wipes Page 61

TERMINATION, CONSUMABLES AND SPLICE KIT CONTENTS (CONTINUED) SC Termination Tool Kit with 110V/60Hz Curing Oven (86763-0000) Suitcase-type kit including the following: 1 6 Position, 110V,60Hz Curing Oven 1 Alcohol Dispenser Bottle 1 Stripper, No Nik (.010) 1 Jacket Stripper 1 Cutter, Kevlar and Cable 1 Cable Preparation Template 1 Tool Case 1 Polishing Pad, Grey 1 Polishing Pad, Red 1 Microscope, 100X 1 Jacket Splitting Tool 1 Consumables Replacement Kit containing the following: 1 Cable Preparation Template 1 Loctite 411 (3g) 1 Plastic Box 1 Lens Cleaning Tissue, 50 sheets 10 Epoxy Packs 10 Lapping Film, 5 micron 25 Lapping Film, 1 micron 25 Lapping Film, 0.5 micron 10 Syringe, 3cc 10 Needles, Round 1 Universal Cleave Tool 6 Curing Fixtures, 900 µm Fiber 1 Crimp Tool - SC, 1 Piece 1 Termination Procedure, SC 1 Piece 1 Termination Procedure, SC 1 Piece 900 µm 1 Polishing Tool, SC Consumables Kit ST and SC (86710-5000) Kit includes the following: 1 Cable Preparation Template 1 Loctite 411 (3g) 1 Plastic Box 1 Lens Cleaning Tissue, 50 sheets 10 Epoxy Packs 10 Lapping Film, 5 micron 25 Lapping Film, 1 micron 25 Lapping Film, 0.5 micron 10 Syringes, 3cc 10 Needles, Round Ultrasplice Splice Kit (Contains No Splices) (91.B0210) Lighted Fiber Optic Workstation with all tools below: 1 Lighted Magnifier/Holder Assembly 1 Battery Pack with Switch 1 Siecor Pocket Cleaver 1 No-Nik Buffer Stripper 1 Wire Stripper 1 Scissors for Kevlar 1 Package of Cleaning Pads 1 Alcohol Bottle 1 Carry Case/Workstation 1 Installation Video Page 62

ST/SC Crimp Tools This crimp tool has a dual hex cavity to accommodate most standard sized ST/SC crimp sleeves. Easy grip handles reduce installer fatigue. Works with all Molex Premise Network ST and SC connectors. 86710-5200 ST Crimp Tool 86760-5000 SC Crimp Tool 86710-5200, 86760-5000 ST/SC Crimp Tool Shipping Weight: 15 oz. (425g) The ST/SC Polishing Tools Consistent and reliable PC (physical contact) terminations are easily achieved with the constant pressure of the ST/SC polishing tools. The fixture incorporates a spring loaded nest that provides uniform downward pressure on the ferrule tip. With this feature, operator variability is virtually eliminated. 86710-1000 ST Polishing Tool 86763-1000 SC Polishing Tool 86710-1000, 86763-1000 ST/SC Polishing Tool Shipping Weight: 1.0 oz. (28g) Universal Cleave Tool The Universal Cleave Tool is designed for repeated and accurate cleaving of fiber at a controlled length just above the surface of the ferrule. This eliminates the need for a bead of epoxy and extensive operator training. The result is a substantial reduction in polishing time and a significant improvement in production yield. Works with all Molex Premise Network ST and SC connectors. 86753-2000 Universal Cleave Tool 86753-2000 Universal Cleave Tool Shipping Weight: 1.0 oz. (28g) Page 63

Optical Fiber Patch Cords A wide variety of simplex and duplex patch cords are available with virtually any combination of optical fiber connector and any type of single-mode or multimode fiber. Standard lengths include 1M, 2M, 3M and 5M. Special patch cords or pigtails can be ordered by calling Tech Support at 800-266-3827. ST-ST Patch Cords 91.11.611.00100 ST-ST Simplex Patch Cord 62.5/1m 91.11.611.00200 ST-ST Simplex Patch Cord 62.5/2m 91.11.611.00300 ST-ST Simplex Patch Cord 62.5/3m 91.11.611.00500 ST-ST Simplex Patch Cord 62.5/5m 91.11.621.00100 ST-ST Duplex Patch Cord 62.5/1m 91.11.621.00200 ST-ST Duplex Patch Cord 62.5/2m 91.11.621.00300 ST-ST Duplex Patch Cord 62.5/3m 91.11.621.00500 ST-ST Duplex Patch Cord 62.5/5m SC-ST Patch Cords 91.31.621.00100 SC-ST Duplex Patch Cord 62.5/1m 91.31.621.00200 SC-ST Duplex Patch Cord 62.5/2m 91.31.621.00300 SC-ST Duplex Patch Cord 62.5/3m 91.31.621.00500 SC-ST Duplex Patch Cord 62.5/5m SC-SC Patch Cords 91.33.621.00100 SC-SC Duplex Patch Cord 62.5/1m 91.33.621.00200 SC-SC Duplex Patch Cord 62.5/2m 91.33.621.00300 SC-SC Duplex Patch Cord 62.5/3m 91.33.621.00500 SC-SC Duplex Patch Cord 62.5/5m Example of a Custom Patch Cord Order 91.13.611.01000 The above part number would indicate a request for: Fiber Patch Cord Assembly with a ST Connector assembled on one end and a SC Connector assembled on the other. This 10m patch cord would be a singlefiber, multimode (62.5) with a PVC jacket. Custom Patch Cords Custom patch cords may be ordered using the following part number template: 91.. _.00_00 Length in meters Jacket Type: 1 = PVC, 2 = LSSH, 3 = Plenum Number of Fibers 6 = 62.5 µm, 5 = 50µm, 8 = Single Mode 0 = No Connector, 1 = ST, 2 = FDDI, 3 = SC, 4 = ESCON, 7 = SMA 9 = SC Duplex, A = MT-RJ Male, B = MT-RJ Female F = FC, L = LC Connectors Custom patch cords are available for quantities of five pieces or more. Page 64

Draka-Molex Cabling Systems Draka USA, a multibillion dollar cable manufacturer has joined forces with Molex Premise Networks to establish a new customer/vendor partnership standard, Draka-Molex Cabling Systems. Draka-Molex addresses three fundamental issues essential to the long-term success of corporate enterprises: truly significant presence dedicated to supporting cabling system applications everywhere; massive test and development capability dedicated to unsurpassed cabling system performance; and, industrial design innovation dedicated to enhanced cabling system manageability. Draka-Molex offers comprehensive fiber solutions and three warranted copper channel solutions: Bronze, Silver and Gold (refer to page 37 for copper). All warranted and all exceeding, with ample headroom, the EIA/TIA standards in their category. You choose the system that best meets your requirements and Draka- Molex will provide you with the peace of mind inherent when you align with two multibillion dollar industry leaders. Outdoor Cable AERIAL/DUCT CABLE Aerial/Duct Fiber Optic Cable is all dielectric, loose-tube, dry core, polyethylene jacketed cable used for severe conditions encountered in outside plant applications such as aerial pole to pole and underground duct installations. These cables provide superior protection against water, sunlight, and temperature extremes. Aerial/Duct Cable D740L6-06-62X D740L6-12-62X D740L6-24-62X D740L6-36-62X D740L12-144-62X 6-Fiber MM Gigabit Ethernet 62.5/125 Dielectric 12-Fiber MM Gigabit Ethernet 62.5/125 Dielectric 24-Fiber MM Gigabit Ethernet 62.5/125 Dielectric 36-Fiber MM Gigabit Ethernet 62.5/125 Dielectric 144-Fiber MM Gigabit Ethernet 62.5/125 Dielectric ARMORED CABLE Where rodent protection is a requirement, Armored Direct Burial Cables are recommended. A corrugated steel tape and an outer jacket are added to this loose tube, dry core cable as a barrier to rodents. Aerial/Duct Cable Armored Cable D700L6-06-62X D700L6-12-62X D700L6-24-62X D700L6-36-62X D700L12-144-62X 6-Fiber MM Gigabit Ethernet 62.5/125 Armored 12-Fiber MM Gigabit Ethernet 62.5/125 Armored 24-Fiber MM Gigabit Ethernet 62.5/125 Armored 36-Fiber MM Gigabit Ethernet 62.5/125 Armored 144-Fiber MM Gigabit Ethernet 62.5/125 Armored The above cables are also available with Single Mode optical fiber or a combination of Multimode and Single Mode fibers. Additional fiber counts are available. Call Molex Premise Networks for more information. Armored Cable Helix/HiTemp Cables, Inc. Chromatic Technologies, Inc. Page 65

Indoor Cable RISER RATED PREMISE CABLE Riser Rated Premise Cable consists of high-quality optical fiber with a 900-micron buffer wrapped in Kevlar and a flame-retardant outer jacket. The buffered fibers are color-coded and will support direct termination in patch panels or enclosures. All riser cables are UL listed to NEC 770, OFNR. Riser Rated Premise Cable Riser Rated Premise Cable 400T-06-62X 6-Fiber MM Gigabit Ethernet 62.5/125 Riser Rated 400T-12--62X 12-Fiber MM Gigabit Ethernet 62.5/125 Riser Rated 400T6-24-62X 24-Fiber MM Gigabit Ethernet 62.5/125 Riser Rated The above cables are also available with Single Mode optical fiber or a combination of Multimode and Single Mode fibers. Additional fiber counts are available. Call Molex Premise Networks for more information. PLENUM RATED PREMISE CABLE Plenum Rated Premise Cable consists of high-quality optical fiber with a 900-micron buffer wrapped in Kevlar and a flame-retardant outer jacket. The buffered fibers are color-coded and will support direct termination in patch panels or enclosures. All plenum cables are UL listed to NEC 770, OFNP. Plenum Rated Premise Cable 800S-06-62X 6-Fiber MM Gigabit Ethernet 62.5/125 Plenum Rated 800S-12-62X 12-Fiber MM Gigabit Ethernet 62.5/125 Plenum Rated 800T6-24-62X 24-Fiber MM Gigabit Ethernet 62.5/125 Plenum Rated INTERCONNECT CABLES These simplex and duplex cables are ideal for horizontal cables as well as patchcord or jumper assemblies. Each cable consists of 900-micron tight-buffer fibers, Kevlar strength members and a flexible flameretardant jacket. Interconnect Cables 53OT-01-62X 1-Fiber MM Gigabit Ethernet 62.5/125 Simplex Riser Rated 53OT-02F-62X 2-Fiber MM Gigabit Ethernet 62.5/125 Duplex Riser Rated The above cables are also available with Single Mode optical fiber. Additional cable designs such as Plenum or LSZH are available. Call Molex Premise Networks for more information. Page 66

FLT4 TM Molex Premise Networks FLT4 Optical Loss Test Set is an easy to use and inexpensive solution for attenuation testing of multimode systems. The FLT4 test set consists of a dual wavelength optical power source and optical power meter in a rugged plastic carry case complete with ST adapter cap and operation manual. In addition, each optical source and optical power meter features rubber protective boots to prevent accidental damage or abuse to the units. The FLT4 LED light source outputs are stabilized to ensure accurate test results. The source is battery operated and typically provides over 80 hours of battery life. The unit is easy to operate with only a wavelength selection switch and a power switch that illuminates when activated and flashes to indicate a low battery condition. The optical power meter is fully N.I.S.T. traceable to ensure accurate test results. The unit has keys for power on/off, optical power (dbm) and loss (db), set reference and wavelength selection. The power meter is battery operated and typically provides over 60 hours of battery life. The optical power meter even has an auto shutoff feature that activates after 5 minutes if none of the keys are used. The set reference feature of the power meter allows the user to zero out the initial reading and eliminate any field calculations. After setting a reference, simply record the loss or power value for the component under test and then move onto the next test. The FLT4 is an accurate and dependable loss tester and is recommended as the minimum requirement for testing multimode fiber optic systems. Included Items: Case Power Meter ST Adapter Cap Operation Manual TFR-00002 AFR-00096 AFR-00097 AFR-00098 AFR-00099 AFR-00100 FLT4 Optical Loss Test Set Replacement ST Adapter Cap FLT4-S Light Source FLT4-M Optical Power Meter FLT4 Protective Boots FLT4 Carry Case TFR-00002 FLT4 Optical Loss Test Set Dimensions (each unit): 4.5 H x.75 W x1.0 D (115mm x 70mm x 25mm) Kit Shipping Weight (includes case): 2 lb.9 oz. (1.15kg) Page 67