EUROPEAN CURRICULUM VITAE FORMAT PERSONAL INFORMATION Name Gaetani Luca Address 96, Via Giuseppe Casciaro,6 00126 Rome Phone 06-5219249 Fax 06-52319573 E-mail luca.gaetani@eleo2.eu; Nationality Italian Date of birth 27th November 1969 Fiscal code GTNLCU69S27H501J VAT. ---- WORKING EXPIRENCE Date (From to) December 2008 on-going Rome Company Eleo2 Engineering S.r.l. Industrial sector Engineering services Type of Contract --- Role Technical Director Mechanical & Structural Engineer Date (From to) June 2006 December 2008 Company Freelance engineer Industrial sector Energy Field Type of Contract Consultant Role Consultant Date (From to) December 2004 June 2006 Company INSRINGHAUSEN GMBH & Co. KG Novara plant Role Project engineer, test engineer, FEM specialist, Advanced research engineer Date (From to) October 2002 December 2004 Company KEIPER GMBH & Co. KG Torino office Role Engineering Manager Date (From to) October 1999 October 2002 Company Johnson Controls Seating Torino office Role Project, Engineer, Lead Engineer. Pagina: 1/5
QUALIFICATION & TRAINING Date (From to) April 1998 September 1999 Company Alpla Werke Lehner GMBH & Co. KG Anzio plant Industrial sector Plastic Role Quality control Manager Date (From to) May 1997 April 1998 Company Procter & Gamble Campochiaro plant Industrial sector Chemical Role Process Engineer, plant project engineer Date (From to) 1-4 MARCH 2012 derby Training or Qualification INTERGRAPH UK Training or qualification CAESAR II dynamic analysis course Date (From to) 10-15 APRIL 2011 PAris Training or Qualification AREVA training center Training or qualification RCC-MR: Design & Fabrication of nuclear power plant Date (From to) 15-20 JUNE 2011 Amsterdam Training or Qualification ASME continuing education Training or qualification ASME Section III, Division 1: Design & Fabrication of nuclear power plant Date (From to) 19-21th May 2009 Los Angeles (CA) Training or Qualification ASME Leadership course Training or qualification ASME leadership Date (From to) 2008 On line Training or Qualification ASME continuing education Training or qualification Section VIII, Division 2: Design & Fabrication of Pressure Vessel Qualification Pagina: 2/5
Date (From to) 19-21th May 2008 Torino Training or Qualification ASME continuing education Europe Training or qualification Section VIII, Division 1: Design & Fabrication of Pressure Vessel Date (From to) 7-8 May 2008 Milano Training or Qualification Comitato termotecnico italiano CTI Training or qualification Cogeneration system for building application Date (From to) 1-2-3 April 2008 Chieti Training or Qualification ANIMA UCC Training or qualification Mechanical & thermal design for tubular heat exchanger (ASME +EN) Date (From to) April 2008 Milano Training or Qualification UPDATING Training or qualification Micro-wind machines -design and site installation requirement Date (From to) 27-29 Febrary 2008 Training or qualification Cogeneration plant technology Date (From to) 14-15 March 2008 Milano Training or Qualification ANIMA UCC Training or qualification Mechanical design of pressure vessels and flanged connections(asme & EN) Date (From to) 16th Febrary 20 July 2007 Roma Training or Qualification SAFE (Sostenibilità Ambientale Fonti Energetiche) www.safeonline.it Training or qualification Management of energy resources Master 600 hours Date (From to) 15-17 November 2006 Roma Training or qualification Biomass plant technology Date (From to) 18-21 October 2006 Roma Pagina: 3/5
Training or qualification Photovoltaic plant site installation Date (From to) 19-22 September 2006 Roma Training or qualification Photovoltaic plant design Date (From to) 14 September 2006 Bergamo Training or Qualification Suntek Training or qualification Geothermal installation Date (From to) 18 Febrary 2003 Torino Training or Qualification NAFEMS italia Training or qualification Basics of FEA LANGUAGES Date (From to) 26 July 2002 Torino Training or Qualification Dassault System (abex italia) Training or qualification CATIA V5 base course Date (From to) September 1990-October 1996 Roma Training or Qualification University of Rome Tor Vergata Training or qualification Degree in mechanical engineering machine design and construction Qualification degree Date (From to) September 1983 July 1988 Roma Training or Qualification ITAER F. De Pinedo Training or qualification Degree as aeronautical technician and pilot civil patent Qualification degree Mother tongue Italian First language English (good) Second Language German (basic knowledge) Pagina: 4/5
COMPLEMENTARY INFO Speaker at the SAFAP conference (safety and reliability of pressure vessel equipments) conference hold in Venice 12-13th June 2010 with the article titled analisi FEM di una saldatura di un reattore petrolchimico in regime di creep sotto l azione di carichi esterni di pressione e temperature. Speaker at the seminar titled METODOLOGIE DI PROGETTAZIONE DI ATTREZZATURE E SCAMBIATORI IN PRESSIONE AD ALTA TEMPERATURA IN AMBITO PED ED ASME hold in Milano at CTI on 20th-Nov-2009 with the presentation titled Design by analysis methodology in creep range. Attendance at the ASME Pressure Vessels and Piping Conference 26-30th July 2009 Praga (Cheka Republic) for the software demonstration forum as MT-MECH representative. Speaker at the SAFAP conference (safety and reliability of pressure vessel equipments) conference hold in Cagliari 12-13th June 2008 with the article titled Il metodo FEM nella progettazione di bocchelli e branch connections e limiti della normative di settore Since July 2010 I m in charge as secretary of the Italian ASME section www.asme.org ASME (America society of mechanical engineer) member since January 2007 www.asme.org. Since November 2011 I m CAESAR II instructor for INTERGRAPH ICAS ITALY. Autorizzo il trattamento dei miei dati personali ai sensi del D.Lgs. 196/2003 Pagina: 5/5