VTS³ and VCS³ Stress Screening Systems More Power for Maximum Quality Assurance
Tailor-made for your product: Our proven testing methods Thermal and climatic conditions can affect the production, storage and use of your products and therefore negatively influence their functioning, properties or service life. It is essential for the support of your product development and quality assurance to test products for possible early failure. Real test conditions Advantages of ESS Environmental stress screening (ESS) refers to a method in which test specimens are exposed to climatic, thermal or mechanical stresses in order to provoke early failures. To cite just one example, this can uncover weaknesses in design, material or production of electronic modules. ESS makes it possible to sort out unreliable systems already during production testing. It has become established as a standard method for improving quality and contributes crucially to the extension of the functional lifetime of products. Higher quality, greater reliability and longer service life of the products Minimization of risk (even for new products) Fast feedback in-house rather than from customers Cost reduction because customers do not experience product failures during the warranty period Increased customer satisfaction Reduction of follow-up costs The longer flaws are ignored in the life cycle of a product, the more expensive the follow-up costs for rectifying them become. Life time graph of electronic components A F 1 2 3 A: ESS moves these failures from field to factory F: Failures t: Time 1: Premature failures 2: Operational lifetime 3: Wear out phase t Moves failures of operational lifetime to factory: The ESS method 2
VTS³ and VCS³ Stress Screening Systems: Impressive Technology More power The VTS³ and VCS³ temperature and climatic testing systems fill the gap between our proven temperature and climatic testing systems in the VT³ and VC³ range and our shock test systems. With test space sizes from 190 to 140 litres and a temperature range from C to C, we are able to meet nearly all customer requirements. The VCS³ model series implements common climatic testing standards. Preferred rates of change are K/min, 10 K/min and 1 K/min. For special applications, we offer test systems up to 30 K/min. Whether in production, research, development or quality assurance do not leave the functionality of your products to chance, entrust it to us. 3
Thought through: Equipment that unites function and design Test space door The high-quality insulated test space door allows access to the entire cross-section of the test space. Special circumferential profiled seals and the self-tightening one-hand door lock guarantee optimal sealing of the door. Test space The corrosion-resistant test space is produced from high-quality stainless steel and welded vapour tight. Smooth surfaces, rounded corners and embossed side walls to accommodate shelves guarantee easy cleaning of the test space. Water reservoir The VCS³ climatic test system is equipped with an integrated and easily accessible water supply tank. The water level is reliably detected by means of two sensors. If refilling is required, the user is informed via the colour touchpanel. 4
Temperature monitoring An independent, adjustable t min /t max temperature limiter protects the test specimens against thermal overload (in conformity with EN 6019-2, 2006). A safety temperature limiter is additionally installed to ensure that the test system does not become overheated. Stainless steel entry ports Models of all sizes are equipped as standard with two stainless steel entry ports (approx. 0 mm on the left and approx. 12 mm on the right) for introducing measurement and supply connections or additional equipment. The stainless steel construction prevents intrusion of moisture into the insulation even under extreme climatic conditions of 98% RH. Psychrometric humidity measurement (VCS³ only) The humidity measurement system is based on the psychrometric measurement principle and works with a continuously wetted, easily accessible wet temperature sensor. This type of wetting leads to self-cleaning of the sensor and thus to a tremendous extension of service life. Other humidity measuring systems are optionally available.
Convenient accessories: Lighten your work Because of our long experience with stress screening systems, we can offer you a large selection of options, modifications and special accessories. Our goal is to satisfy the customer s requests with tailor-made, flexible solutions of the highest quality. Here is a selection of our optional special equipment: Notch port Facilitates loading: The notch port on the door frame The door frame can be optionally provided with a notch port. This facilitates the introduction of measurement and control elements and makes it possible to load the test space with already connected test specimens. Compressed-air dryer Reliable drying: The space-saving compressed air dryer The compressed-air dryer supports the dehumidification process in the test system. It enables generation of extremely dry air, thus reliably avoiding condensation in the test space. The optional compressed-air dryer is included in the equipment attachment for units up to K/min. Telescopic extension drawers Intelligently modified: Telescopic extension drawers The test space can be optionally equipped with telescopic extension drawers. The drawers are completely made of stainless steel and can each support test specimens up to 30 kg. The telescopic extension drawers can be pulled out up to 80% of their length. The insert shelves included as standard equipment are not needed with this modification. 6
Colour touchpanel and S!MPATI*: Communication with a system More control in a shorter time With its menu-driven user interface, the removable 8 colour touchpanel coordinates and monitors the tasks of the individual service components. Process sequences, system conditions and other process images are presented as graphical, self-explanatory pictograms. This makes use even more intuitive. Up to 100 testing programs can be easily and securely created, stored and reactivated. The desired functions are initiated with one touch. The standard: The 8 colour touchpanel The system is compatible with the S!MPATI* simulation management software. S!MPATI* sophisticated simplicity The S!MPATI* computer-assisted simulation management software is the optimal system for using and controlling testing and production systems. Your data is seamlessly documented and graphically evaluated. Easy operation: The 3. colour touchpanel (option) With S!MPATI* you can: control test and process flows more easily store and evaluate measurement and process data with clearly presented graphics easily create convenient test programs with a graphical editor link up to 99 systems to one another optimally utilize lab capacity with an easily understood time management system Comfortable control: S!MPATI* (option) 7
Perfection in detail: Components for secure testing conditions 1 4 3 Components at a 7glance: 1. Main switch panel 2. Control unit colour touchpanell L2 3. CONTROLPAD* 4. Test space door, optional with L4 window L1. Supply connections 6. Lead-through pad or notch port (option) 7. Entry port R1: approx. 12 mm Ø L1: approx. 0 mm Ø R2 additional installation position r. h. side (option) L2... additional installation position l. h. side (option) 2 2 L6 L3 7 7 7 4 7 4 1 1R3 R6 3 3 R3 R6 L6 L3 6 L L2 2 2 2 2 R2 R R2 R R1 R4 R1 R4 L4 L1 2 7 8
Individual solutions: Select from our spectrum Basic equipment Options VTS³ Temperature Stress Screening System Highly efficient 32 bit control and monitoring system S!MPAC* 8 Colour touchpanel CONTROLPAD* in the door Potential-free contact for switching-off of test specimens USB and Ethernet interface 4 digital outputs (max. 24 V-DC) 4 digital inputs (max. 24 V-DC) Adjustable software temperature limiter min./max. Safety device for test specimens with independent, adjustable temperature limiter t min /t max Entry ports made of stainless steel 1 x approx. 0 mm Ø, 1 x approx.12 mm Ø with slotted foam-silicone sealing plug and complete silicone sealing plug 1 shelf made of stainless steel Refrigeration unit water-cooled WKD-Calibration of 2 temperature values in middle of test space VCS³ Climatic Stress Screening System additionally Psychrometric humidity measurement, continuously wetted, self-cleaning Water supply tank for humidification water Connection for automatic water replenishment Cleaning device for compliance of quality of humidifying water WKD-Calibration of 2 climate values in middle of test space Further options/special accessories, tailor-made for your special requirements, on request. VTS³ Temperature Stress Screening Test System 3. colour touchpanel with S!MPAC* program tool (without CONTROLPAD*) Software S!MPAC* Interface RS 232 and others on request Interface converter from RS 232 IEEE 488/GPIB/ IEC62 Additional digital I/O Analogue transducer card I/O (4 Pt100 inputs and outputs) Temperature measurement on the test specimen Adjustable circulating air quantity (adjustable fan speed) Equipment for purging the test space with GN 2 / Compressed air connection Door with large observation window and test space lighting Door with window and two hand holes Compressed air dryer Mobile design (to 480 l) Additional sensors WKD or DKD calibration of measuring points Additional entry ports approx. 0, 80 and 12 mm Ø (possible positions see page 8) Additional shelves Telescopic extension drawers Lead-through pad or notch port Air-cooled refrigeration unit, external Special voltages Spatial WKD or DKD calibration Extension for special test specifications VCS³ Climatic Stress Screening Test System additionally Independent sensor for temperature and humidity measurement Humidity control via capacitive humidity measuring system Deep dehumidification for negative dew points Demineralization unit 9
Data and Facts VTS³ and VCS³ Stress Screening Systems Stress Screening Systems VTS³ & VCS³ K/min Type VTS³/VCS³ 4018-7018- 4034-7034- 4060-7060- 4100-7100- 410-710- Test space volume litres 190 190 33 33 600 600 990 990 140 140 Performance for temperature tests Temperature range C Temperature deviation in time 1) K ±0.1 to ±0. Temperature homogeneity in space 2) K ±0. to ±2.0 Temperature rate of change in accordance with IEC 60068-3- Heat compensation Cooling K/min 8.0 7. 6.8 6.7 6. 6.0 6.7 6.0 6.3.0 Heating K/min 7.0 7. 6. 6.8 6.0 6.0 6.1 6.1 6.0 6.0 at +20 C W 4000 3000 4000 3000 000 000 000 000 000 000 at - 20 C W 100 3000 100 3000 2000 000 2000 000 2000 000 Temperature calibration values +23 C and +80 C Performance for climatic tests only VCS³ Temperature range C +10 to +9 Temperature deviation in time 1) K ±0.1 to ±0.3 Temperature homogeneity in space 3) K ±0. to ±1.0 Humidity range % 10 to 98 Humidity deviation in time 1) % ±1 to ±3 Dew point temperature range C +4 to 94 C (to -3 C) 8) Heat compensation 4) W 400 400 400 400 00 00 00 00 00 00 Climatic calibration values Test space dimensions +23 C / 0 % RH and +9 C / 0 % RH Width mm 80 80 80 80 800 800 1100 1100 1100 1100 Depth mm 40 40 76 76 800 800 90 90 147 147 Height mm 70 70 70 70 90 90 90 90 90 90 Width ) 87 87 87 87 109 109 139 139 139 139 mm Width 780 780 780 780 1000 1000 1300 1300 1300 1300 Overall dimensions Depth ) 14 14 1860 1860 1910 1910 208 208 2610 2610 mm Depth 138 138 1700 1700 170 170 192 192 240 240 Height mm 180 180 180 180 200 200 200 200 200 200 Electrical connection 3/N/PE AC, 400 V ±10 %. 0 Hz Rated power kw 8 9 8 9 11 13 23 27 23 27 Noise level 6) db(a) 6 7 6 7 9 60 68 69 68 69 Cooling water consumption max. 7) m³/h 1.6 2.0 1.6 2.0 2.4 2.8 3.6 4.4 3.6 4.4 The performance values refer to +2 C ambient temperature. 1) in centre of test space, 2) relative to the set value in temperature range tmin to +10 C, 3) relative to the set value for humidity values > 20 % RH, 4) in the range of +2 C to +9 C and to max. 90 % RH, ) can be reduced by dismounting of components, 6) measured in 1 m distance from the front and in 1.6 m height at free field measurement acc. to EN ISO 11201, 7) Cooling water consumption max. (m³/h) (at 28/32 C cooling water temperature), 8) discontinuous operation Humidity diagram A C 100 90 80 70 60 0 40 30 20 10 4 3 2 1 0 0 10 20 30 40 0 60 70 80 90 100 B % A Test space temperature in C B Relative humidity in % RH 1 Standard humidity range 2 Range with intermittent operation (dew point +4 C to -3 C) 3 Extended humidity range with optional accessory compressed air dryer, dew point down to -12 C controlled 4 Extended humidity range with additional equipment compressed air dryer (optional accessory) and capacitive humidity measuring system (optional accessory), dew point down to approx. -20 C controlled. 10
VTS³ & VCS³ 10 K/min VTS³ & VCS³ 1 K/min 4027-10 7027-10 4048-10 7048-10 4080-10 7080-10 4130-10 7130-10 4027-1 7027-1 4048-1 7048-1 4080-1 7080-1 4130-1 7130-1 270 270 480 480 800 800 1300 1300 270 270 480 480 800 800 1300 1300 ±0.1 to ±0. ±0.1 to ±0. ±0. to ±2.0 ±0. to ±2.0 12. 14. 12. 11.0 12.0 12.0 11. 10. 16.0 18.0 18.0 1.0 18.0 1. 17.0 14. 10.0 10.0 10.0 10.0 12.0 12.0 12.0 11.0 16.0 17.0 16.0 17.0 16.0 16.0 16.0 16.0 6000 6000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 8000 2000 6000 3000 8000 3000 8000 3000 8000 3000 8000 3000 8000 3000 8000 3000 8000 +23 C and +80 C +23 C and +80 C only VCS³ only VCS³ +10 to +9 +10 to +9 ±0.1 to ±0.3 ±0.1 to ±0.3 ±0. to ±1.0 ±0. to ±1.0 10 to 98 10 to 98 ±1 to ±3 ±1 to ±3 +4 to 94 C (to -3 C) 8) +4 to 94 C (to -3 C) 8) 400 400 00 00 00 00 00 00 400 400 00 00 00 00 00 00 +23 C / 0 % RH and +9 C / 0 % RH +23 C / 0 % RH and +9 C / 0 % RH 80 80 800 800 1100 1100 1100 1100 80 80 800 800 1100 1100 1100 1100 61 61 60 60 800 800 132 132 61 61 60 60 800 800 132 132 70 70 90 90 92 92 92 92 70 70 90 90 92 92 92 92 87 87 109 109 139 139 139 139 87 87 109 109 139 139 139 139 780 780 102 102 133 133 133 133 780 780 102 102 133 133 133 133 2110 2110 2670 2670 2840 2840 331 331 2110 2110 2670 2670 2840 2840 331 331 2010 2010 2 2 2700 2700 317 317 2010 2010 2 2 2700 2700 317 317 190 190 2020 2020 2014 2014 2014 2014 190 190 2020 2020 2014 2014 2014 2014 3/N/PE AC, 400 V ±10 %. 0 Hz 3/N/PE AC, 400 V ±10 %. 0 Hz 8.0 14 16 17 31 3 31 3 12 16 20 24 36 4 36 4 68 68 72 73 73 73 73 73 68 68 72 73 73 73 73 73 2.4 3.8 3. 4.2 4.2. 4.2. 3. 4.2 6.1 6.3 7.0 8.0 7.0 8.0 Heat compensation performance curves 9000 9000 Heat compensation 8000 7000 6000 000 4000 3000 2000 1000 0 4. 3. 2. 1. -40 20 100 180 Heat compensation 8000 7000 6000 000 4000 3000 2000 1000 0 4. 3. 2. 1. -70 20 100 180 Temperature Temperature 1. VTS³ 4018-, VTS³ 4034-2. VTS³ 4060-, 4100-, 410-3. VTS³ 4027-10 4. VTS³ 4027-1, 4048-10, 4048-1, 4080-10, 4080-1, 4130-10, 4130-1 1. VTS³ 7018-, 7034-2. VTS³ 7060-, 7100-, 710-3. VTS³ 7027-10 4. VTS³ 7027-1, 7048-10, 7048-1, 7080-10, 7080-1, 7130-10, 7130-1 11
Practical details: The VTS³ and VCS³ stress screening systems are also optionally available with hand holes and castors. We reserve the right of changes in construction resulting from technical progress. Some of the illustrated systems contain optional extras. Vötsch Industrietechnik GmbH Environmental Simulation Heat Technology Product Range Environmental Simulation Beethovenstrasse 34 72336 Balingen-Frommern Fon +49 7433 303-0 Fax +49 7433 303-4112 VIT-E /16 2M 04.12 N-KA www.voetsch.info info@v-it.com