CMF Products for the Oral and Maxillofacial Surgeon Products shown may not be licensed or cleared in all markets. Availability is subject to change without notice.
Products for: the oral and maxillofacial surgeon MedLED Sapphire the premium headlight Surgical Instruments Maxillofacial... pg 4-5 MX Grafter, Ebner 502, R. Quétin Bone Mill... pg 6-7 Bien Air power for exodontia and implantology Power Bien Air... pg 8-9 Light MedLED Sapphire... pg 10-11 MedLED Onyx... pg 12-13 Plating Level One Fixation... pg 14-15 Level One Midface Tray... pg 16-17 ThreadLock TS... pg 18-19 Orthognathic... pg 20-21 MMF... pg 22 USR... pg 23 In-Office Fixation Kit... pg 24-25 OrthoAnchor... pg 26-27 Surgical Instruments a tradition of quality Resorbable SonicWeld Rx... pg 28-30 CT Based VSP and PCI... pg 32-35 Distraction... pg 36-39 2
Titanium Osteosynthesis System comprehensive modular solutions for orthognathic, trauma, and reconstruction SonicWeld Rx a new era in resorbable osteosynthesis Patient Contoured Implants every one is unique Distraction Osteogenesis control the regeneration of bone - product not to scale unless otherwise noted - 3
surgical instruments: maxillofacial Oral and Maxillofacial Instruments Our direct sales consultants cover every geography of North America, and are especially trained in oral and maxillofacial products. We manufacture specialized instruments for oral surgery recognized for their quality by the surgeons that designed them. For additional product information, please refer to KLS Martin Surgical Instrument Catalog. Obwegeser 4
- product not to scale unless otherwise noted - 5
surgical instruments: bone harvesting and particulate MX Grafter and Ebner 502 rake bone Disposable (pre-sterilized) Rapidly harvest 2-8 cc of autogenous bone Cuts, collects, and delivers Reusable high-strength stainless steel handle Three head angles Sharp, hollow ground, autoclavable blade Low cost per case; replace only the blades For additional product information, please refer to brochure Distraction Dentoalveolar Devices Instruments. Overview. 6
R. Quéntin Bone Mill Designed to grind bone of various densities Specially designed to provide maximum graft material from each harvest Collector cup allows easy transfer to graft site For additional product information, please refer to brochure The R. Quétin Bone Mill. - product not to scale unless otherwise noted - 7
Power: Bien Air Bien Air Power At the heart of every busy oral & maxillofacial surgeon s practice is a hard-working power system. Chiropro L Increase your expectations Hand Pieces Variety of hand pieces from 5 RPMs to 200,000 RPMs Burs Many bur patterns available sterile and non-sterile For additional product information, please refer to brochure Implantology Systems. 8
The Bien Air power system is a very easy-to-use, powerful electric motor system. ichiropro The smart way to success - product not to scale unless otherwise noted - 9
cordless headlight: MedLED Sapphire MedLED Sapphire premium visibility With the MedLED Sapphire headlight, KLS Martin provides a high-performance portable OR headlight. With an emphasis on comfort, brightness and battery life, the MedLED Sapphire headlight was designed to endure extensive deep cavity surgery with very high light intensity. For additional product information, please refer to brochure MedLed Sapphire & Onyx. 10
Features Comfort-emphasized strap design Luminous intensity: max. 200,000 lux Color temperature: 5000 K Battery service life: min. 6.75 hours Charging time: 6 hours Change batteries with speed, ease, and without powering off Rapid USB charging from wall adapter or PC Integrated battery status indicators Continuous digital dimming Total weight: 11 oz. 2x, 3x, 4x snap-on magnifiers available 460 mm 65 mm 85 mm - product not to scale unless otherwise noted - 11
cordless headlight: MedLED Onyx MedLED Onyx versatile visibility The MedLED Onyx offers the surgeon a premium light with a lower price. The MedLED Onyx maintains the comfort and battery life of the MedLED Sapphire while delivering up to 100,000 lux in a wide or narrow beam. For additional product information, please refer to brochure MedLed Sapphire & Onyx. 12
Features Comfort-emphasized strap design Luminous intensity: max. 100,000 lux Color temperature: 5000 K Battery service life: min. 6.75 hours Charging time: 6 hours Change batteries with speed, ease, and without powering off Rapid USB charging from wall adapter or PC Integrated battery status indicators Continuous digital dimming Total weight: max. 13 oz. 2x, 3x, 4x snap-on magnifiers available 460 mm 10 mm 100 mm - product not to scale unless otherwise noted - 13
osteosynthesis: freedom to choose The Level One fixation system has a comprehensive selection of plates and mesh. The organized, color-coded system aids in selection and inventory management. Newly designed instrumentation along with comfortable, proven designs allow you to shape and place fixation easily. For additional product information, please refer to Level One Fixation catalogs. 14
- product not to scale unless otherwise noted - 15
osteosynthesis: midface trauma simplified Level I Midface Tray For additional product information, please refer to brochure Level I Midface Tray Catalog. 16
- product not to scale unless otherwise noted - 17
osteosynthesis: mandibular trauma and reconstruction KLS Martin ThreadLock TS Tray An innovative design for mandibular trauma and reconstruction. The tray offers a comprehensive locking plate selection from mini-plates through reconstructive plates. Mini plates = 1.0 mm The Taper Screw (TS) design uses the same thread and pitch throughout the entire screw. This taper design allows the screw to engage the bone prior to locking into the plate with the final turns. = 1.5 mm Fracture plates = 2.0 mm Low profile reconstruction plates Screws can lock in plates with up to 20º of angulation in each direction All locking plates and screws are colored green All plates can accept locking as well as non-locking screws No bending spacers required System includes drill guide for all plate sizes All screws have a concave head for easy pick-up with the screwdriver blade All screws are manufactured from high-strength titanium alloy Reconstruction plates = 2.5 mm = 3.0 mm Fracture and bridging reconstruction plates 20 º 20 º 40 º For additional product information, please refer to Level One Fixation Catalogs ThreadLock TS maxdrive and Cross-Drive. 18
- product not to scale unless otherwise noted - 19
osteosynthesis: orthognathic The Orthognathic OrthoAnchor System The passion to find a better way. At KLS Martin, we are driven to make the best possible devices A complete so that line patients of plating and products practitioners for all orthognathic have a reason procedures. to smile. The OrthoAnchor System does just that. Absolute anchorage with immediate loading Better, faster results without headgear The Orthognathic and FAB module tray options offer the orthognathic surgeon options for prebent plates or orthognathic plates ideal for osteotomies and measured advancements. For additional product information, please refer to the Level One Fixation catalog Orthognathic Fixation Products. 20
- product not to scale unless otherwise noted - 21
osteosynthesis: MMF and screw removal Maxillo-Mandibular Fixation (MMF) screws MMF screws can decrease risk and the time required for stabilization of maxillofacial fractures. For additional product information, please refer to brochure MMF System. 22
Universal Screw Removal System (USR) Craniomaxillofacial rigid fixation systems are available from a variety of manufacturers. The USR system is a complete screwdriver array that allows the easy removal of virtually any craniomaxillofacial screw. #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #15 #16 For additional product information, please refer to brochure Universal Screw Removal. - product not to scale unless otherwise noted - 23
bone augmentation: office fixation kit In-Office Fixation Kit The Level One Office Fixation Kit can store a variety of screws and meshes, as well as alveolar distractors, fracture plates, and MMF screws. Combine it with any of our Level One storage or plating modules to create the perfect system for your practice. Build your own kit with the following options: Screw sizes 1.0 / 1.5 / 2.0 mm Drill-Free screws available in select sizes Micro mesh / 3D Mesh Complete, compact kit for all bone graft indications 2:1 2:1 2:1 Tenting/ bone grafting screws Bone grafting screws Fixation screws For additional product information, please refer to brochure Dentoalveolar Instruments. 24
- product not to scale unless otherwise noted - 25
orthodontic: OrthoAnchor screws and c-tube plates The OrthoAnchor System The passion to find a better way. At KLS Martin, we are driven to make the best possible devices so that patients and practitioners have a reason to smile. The OrthoAnchor System does just that. Absolute anchorage with immediate loading Better, faster results without headgear before after For additional product information, please refer to brochure OrthoAnchor. 26
OrthoAnchor screws Drill-Free screws C-tube plates - product not to scale unless otherwise noted - 27
osteosynthesis: resorbable innovation The SonicWeld Rx revolutionary process creates welded three-dimensional osteosynthesis utilizing a resorbable polymer pin and sonic vibration. The process is very simple, very fast, and has more holding power than standard resorbable screws. For additional product information, please refer to any SonicWeld Rx literature. 28
- product not to scale unless otherwise noted - 29
bone augmentation: resorbable innovation SonicWeld Rx has also changed the surgical options for space maintenance in particulate bone augmentation. No longer is it necessary to retrieve mesh or rely on cortical bone for fixation quality. SonicWeld Rx unit handpiece sonotrode collagen barrier SonicPin Rx For additional product information, please refer to brochure SonicWeld Rx Restoring Nature. 30
component tray miniset tray Xcelsior complete dental attachments wrench for sontrodes sonotrodes Resorb X SonicPins Rx - product not to scale unless otherwise noted - 31
CT based solutions: virtual surgical planning VSP VSP Reconstruction is a digital planning sloution for all your craniomaxillofacial surgical needs. Common VSP Reconstruction applications include planning for maxilla/mandible reconstruction using the fibula free-flap, facial trauma and distraction osteogenesis. Orthognathic OPS For additional product information, please refer to brochures Distraction PCM and CT Devices Based Overview. Implants. 32
Reconstruction - product not to scale unless otherwise noted - 33
CT based solutions: patient contoured implants PCI Titanium and PEEK The ideal solution for reconstruction of bony defects is one that is absolutely symmetrical and functional for each individual patient. With the readily available and cost effective CT scanning technology in hospitals, KLS Martin can manufacture an ideal implant with CT data. Highly advanced materials are available for your implant, each with specific properties that make it particularly suitable for specific fields of use. Our large range of sophisticated manufacturing facilities enables us to meet any challenge. Selective Laser Sintering (SLS), a form of metal 3D printing, has made possible the manufacture of intricate patterns and shapes that were difficult or impossible with previous technologies. Reconstruction no longer requires hand bending malleable, flat meshes and requires a fraction of the time it once did. The precision of the reconstruction is predictable and satisfying for both doctor and patient. Titanium For additional product information, please refer to brochure PCM. 34
PEEK (polyether ether ketone) PCI SLS (Selective Laser Sintering) - product not to scale unless otherwise noted - 35
distraction osteogenesis: midface and alveolar Maxillofacial Distraction Osteogenesis Devices When we began developing the Rigid External Device for midface distraction in the 1990 s, our strong relationship with oral & maxillofacial surgeons and emphasis on innovation fostered an era of distraction devices that changed patient care. This relationship continues today and into the future as we work directly with oral & maxillofacial surgeons around the world to increase the ability to solve complex anatomical problems. If you have a need for distraction, please have our local consultant show you our full range of solutions for your specific case. KLS Martin is dedicated to developing innovative surgical products. We are proud to be the leader in the field of distraction osteogenesis. KLS Martin offers a wide variety of both internal and external distractors for use on the mandible and midface. RED II external midface For additional product information, please refer to brochures Distraction Devices Overview and Special Order Distraction Overview. 36
Track Plus vertical alveolar RPE palatal widening Zürich Maxillary LeFort I - product not to scale unless otherwise noted - 37
distraction osteogenesis: mandible and craniofacial Micro Zürich neonate airway 3DX external mandible For additional product information, please refer to brochures Distraction Devices Overview and Special Order Distraction Overview. 38
Kawamoto LeFort II Wood-Zürich mandibular angle/body Matthews-Tessier monobloc Zürich II mandibular body - product not to scale unless otherwise noted - 39
KLS Martin L.P. A company of the KLS Martin Group Mail: P.O. Box 16369, Jacksonville, FL 32245-6369 Office: 11201 St. Johns Ind Pkwy S, Jacksonville, FL 32246-7652 Tel. 904.641.7746 800.625.1557 Fax 904.641.7378 usa@klsmartin.com www.klsmartinnorthamerica.com The information presented in this brochure is intended to demonstrate a KLS Martin L.P. product. Please refer to package insert for the full list of indications, contraindications, warnings, precautions, and sterilization information. Always refer to the package insert before using any KLS Martin L.P. product. Surgeons must always rely on their own clinical judgment when deciding which products and techniques to use with their patients. Products for Oral + Max Surgeons v4 08.2014