Chapter 5: Trade & Cash Discount



Similar documents
Merchandising Chain Chapter 5 Trade Discount, Cash Discount, Markup, and Markdown Terminology Used in the Trade Discounts (5.1) Merchandising Chain

Trade Discount, Cash Discount, Markup, and Markdown. Yann Lamontagne

Mathematics of Merchandising

Appendix. PERCENT AND THEIR APPLICATIONS. 1. Percent formulas

Chapter 27 Pricing Math. Section 27.1 Calculating Prices Section 27.2 Calculating Discounts

Matt 109 Business Mathematics Notes. Spring 2013

CHAPTER5 Accounting for Merchandising Operations 5-1

Trade Discounts, Cash Discounts, Markup, and Markdown

Simple Interest. and Simple Discount

FIA FA1. Recording Financial Transactions

Accounting for Merchandising Operations

Hundredweight. Kilogram. What word is represented by each of the following abbreviations? T7-1 REVIEW EXERCISES CHAPTER 7 SECTION I

Merchandise Accounts. Chapter 7 - Unit 14

INVENTORY. Merchandising Firms COST OF GOODS SOLD. Traditional bookkeeping uses separate accounts for different types of transactions

How To Factoring

MERCHANDISING. Forecasting Sales. Forecasting Sales (cont.) Planning Inventory Levels. Stockturn Example Month February Physical Inv.

Accounting Building Business Skills. Learning Objectives. Learning Objectives. Paul D. Kimmel. Chapter Four: Inventories

Accounting for Merchandising Companies: Journal Entries

Short-term investments (also known as marketable securities) are easily convertible to cash that a company plans to hold for a year or less.

Place in College Curriculum: This course is required for all Business Administration AAS degree and Administrative Assistant certificate.

NOTE: You will need to receive the trade item into your inventory through the receiving system to complete any trade-in activity.

IMPERIAL OIL LIMITED (in millions) December

Example. Practice. List Price Trade-Discount Rate Trade Discount Net Price $ % a. b % a. b % a. b % a. b.

Merchandising Operations

Inventories: Cost Measurement and Flow Assumptions

Accounting for Merchandising Operations

5-1. Prepared by Coby Harmon University of California, Santa Barbara Westmont College

2. A service company earns net income by buying and selling merchandise. Ans: False

Tech Prep In Business & Office Technology

Chapter 2 An Introduction to Forwards and Options

Tech Prep In Business & Office Technology

Powerful tools for investing, speculating or hedging

Chapter 6. An advantage of the periodic method is that it is a easy system to maintain.

Chapter 5 Merchandising Operations

Chapter 5. Accounting for merchandising operations. Appendix 5A: Periodic inventory system

Module 4 - Audio File Legend

Accruals and prepayments

Process Accounts Payable and Receivable

Effective Replenishment Parameters. By Jon Schreibfeder EIM. Effective Inventory Management, Inc.

Processing supplier invoices and credit notes

Fee Policy and Bad Debt management procedure guide

Accounting for a Merchandising Business

WOOD: Business Accounting Basics, 01 CHAPTER 5. Value added tax

Breakeven Analysis. Breakeven for Services.

Section 8.1. I. Percent per hundred

Study Guide Chapter 5 Financial

lesson seven about credit overheads

APPEALS INDUSTRY SPECIALIZATION PROGRAM COORDINATED ISSUE PAPER. ISSUE: Valuation of an Acquired Retailer's Inventory

CHAPTER 5 Merchandising Operations. Study Objectives

CHAPTER 5 ACCOUNTING FOR MERCHANDISING OPERATIONS

DISCOUNTS, COUPONS AND CASH REBATES

Chapter 4: Time Value of Money

Continuing from the article in the December 2012 issue of Velocity, we can now look at calculating a figure for PUP and how to adjust it.

The Concept of Present Value

Preparing cash budgets appendix

Chapter 6. Time Value of Money Concepts. Simple Interest 6-1. Interest amount = P i n. Assume you invest $1,000 at 6% simple interest for 3 years.

BUSINESS MATH MATH #106

INTRODUCTION TO ACCOUNTING ACNT 1303 Lecture Notes. Chapter 1 The Nature of Accounting

Grade 11 or 12 Mathematics for Business

THEME: LOANS vs. LEASES

Invoice Factoring Earn More Money Win More Sales Get More Customers Run Your Business More Effectively

Adjusting the Accounts

REIT; DIVIDENDS PAID DEDUCTION; REINVESTMENT PLAN

Uniform Terms and Conditions of the German Textile Industry Version: Jan. 1, These Uniform Terms and Conditions Apply Only Between Merchants

Income Statements. Accounting for Merchandising Operations

Effective Replenishment Parameters By Jon Schreibfeder

Exam 3 Review. FV = PV (1 + i) n. Format. What to Bring/Remember. Time Value of Money. Solving for Other Variables Example. Solving for Other Values

Module 4: Accounting for merchandising activities

Unique Global Imports Simulation. Helpful Hints

2. An agreement will be concluded at the moment of express acceptance of the order by the Seller in a manner that is customary in the sector.

SOLUTIONS. Learning Goal 22 LG LG 22-2.

Handbook: The Cost of Borrowing. Learn what you need to know quickly.

Section 1.5 Linear Models

Bill Discounting. Exporter. Importer BANKING AND TRADE FINANCE TUTORIAL. Importer s Bank. Exporters Bank INDIA FOREX ADVISORS.

Chapter. Bond Prices and Yields. McGraw-Hill/Irwin. Copyright 2008 by The McGraw-Hill Companies, Inc. All rights reserved.

CHAPTER 4 DISCOUNTED CASH FLOW VALUATION

Structured Cash Flows Buyer s Guide

Documents to daybooks

A Quick Snapshot: Microsoft Dynamics GP Functionality for Wholesale Distributors

BACK OFFICE DATA ENTRY REVISION 1.2

ROYAL MALAYSIAN CUSTOMS GOODS AND SERVICES TAX GUIDE ON RETAILING

WHAT ARE INVENTORY SYSTEMS?

Purchase Requisition. Sporting Goods Department Purchasing Department. Request purchase of the following item(s):

Chapter 5. Merchandising Operations

Chapter 8. Reporting and Analyzing Receivables

Accounting and Reporting Policy FRS 102. Staff Education Note 2 Debt instruments - Amortised cost

Before we discuss a Call Option in detail we give some Option Terminology:

Commission. Information Sheet

CHAPTER 8 Valuation of Inventories: A Cost Basis Approach

The Measurement of the Business Income. 1 by recording revenues when earned and expenses when incurred. 2 by adjusting accounts

CHAPTER 9 ACCOUNTING FOR RECEIVABLES

(a) Accounts Receivable... 23,000 Sales Revenue... 23,000. (b) Sales Returns and Allowances... 2,400 Accounts Receivable... 2,400

How To Accept Credit Cards From A Credit Card Provider

International Accounting Standard 2 Inventories

ST-1 Instructions. General Information

11.3 BREAK-EVEN ANALYSIS. Fixed and Variable Costs

Transcription:

HOSP 1107 (Business Math) Learning Centre Chapter 5: Trade & Cash Discount TRADE DISCOUNT A trade discount is an amount deducted from the list price. It is the product of the discount rate and the list price. The list price is the suggested retail price determined by the manufacturer or distributor and listed in their product list or catalogue. Amount of discount = Rate of discount List price For example, if a textbook lists for $40 and is discounted 20%, the discount is: Discount = 20% $40 = 0.2 40 = $8 [Hint: Remember to change the percent to a decimal number before multiplying] The actual or the net price is the difference between the list price and the amount of discount. It is also sometimes called the sale price. Net price = List price Amount of discount In the case of the textbook: Net price = $40 $8 = $32 Example: A pair of jeans that originally cost $90 is now on sale for 30% off. What is the (a) the amount of discount, and (b) the net price. Solution: (a) Amount of trade discount = 0.30 $90 = $27 (b) Net price = $90 $27 = $63 Instead of computing the amount of discount and then deducting this amount from the list price, the net price can be found using the net factor approach. The Net Price Factor (NPF) or net factor can be found using the following formula: Net Price Factor (NPF) = 100% % discount NPF = 1 d The relationship between net price and list price may be stated generally as: Net Price (N) = Net Price Factor (NPF) List Price (L) N = (1 d) L or N = L (1 d) Student review only. May not be reproduced for classes. Authored by Nabeela Rahman

Example: Find the net price for list price $30 less 30%. Solution: Net price = L (1 d) = 30 (1 0.30) = 30 0.70 = $21 DISCOUNT SERIES (MULTIPLE DISCOUNTS) Sometimes sales people offer several discounts to entice the customer to buy the product. If a list price is subject to two or more discounts, these discounts are called a discount series. The key thing to understand about multiple discounts is that the second and third discounts are not based on the original price. They are based on the already discounted price. The short-cut equation to calculate net price in a discount series is given as: Net Price = (NPF of 1 st discount) (NPF of 2 nd discount) x List Price N = (1 d 1 ) (1 d 2 ) L If there are more than 2 discounts; N = (1 d 1 ) (1 d 2 ) (1 d 3 )..(1 d n ) L Example: An item listed at $100 is subject to the discounts of 20%, 10% and 5%. Determine the net price. Solution: N = (1 d 1 ) (1 d 2 ) (1 d 3 ) L N = (1 0.2) (1 0.1) (1 0.05) $100 N = (0.684) $100 = $68.40 When you are dealing with a series of discounts you almost always want to know what the actual rate of discount really is. This is referred to as the Single Equivalent Discount (SED). The formula to calculate SED is: SED = 1 NPF for the discount series SED = 1 [(1 d 1 ) (1 d 2 ) (1 d 3 )..(1 d n )] For the discount series in example 3, the SED = 1 0.684 = 0.316 or 31.60% Student review only. May not be reproduced for classes. 2

Practice Problems 1. A 30% discount on a stereo amounts to $45.58. Compute the list price and the net price. 2. Frank s Décor sells curtains for $85.85 less 25%. What additional discount percent must the store offer the meet a competitor s price of $50.65? 3. A BBQ grill is listed for $520.75 less 10%, 5%, 2%. (a) What is the net price? (b) What is the total amount of discount allowed? (c) What is the exact single rate of discount allowed? 4. Fill in the blanks for the following categories: No. Rates of discounts List Price Net Price SED a. 10%, 15% 105.60 b. 33⅓%, 5%, 7% 54.74 c. 25%, 10%, 10%, 5% 15.25 Solutions 1. List Price = D/d = $45.58/0.3 = $151.93 Net Price = L D = $151.93 $45.58= $106.35 2. Net Price = (1 d) L = 0.75 $85.85 = $64.39 Additional discount = $64.39 $50.65 = $13.74 Additional discount percent = 13.74/64.39 = 21.34% 3. (a) N = (1 d 1 ) (1 d 2 ) (1 d 3 ) L N = (1 0.1) (1 0.05) (1 0.02) $520.75 = (0.8379) $520.75 = $436.34 (b) D = L N = $520.75 $436.34 = $84.41 (c) SED = 1 [(1 d 1 ) (1 d 2 ) (1 d 3 )] = 1 0.8379 = 0.1621 or 16.21% 4. No. Rates of discounts List Price Net Price SED a. 10%, 15% 105.60 80.78 23.5% b. 33⅓%, 5%, 7% 92.94 54.74 41.1% c. 25%, 10%, 10%, 5% 26.42 15.25 42.29% Student review only. May not be reproduced for classes. 3

CASH DISCOUNT Many manufacturers and wholesalers allow customers to take a cash discount, a reduction of the amount due on an invoice to encourage prompt payment of the bill. Calculating the cash discount can be tricky since you need to know how to count the exact number of days for which the discount is offered. Knowing if a month has 30 or 31 days (or 28 in the case of February) is important. The knuckle method is often useful: The knuckle months (January, March, May, July, August, October and December) have 31 days. The other months have 30 or fewer days. There are usually three methods to calculate cash discounts: Ordinary Dating, End of Month (EOM) Dating and Receipt of Goods (ROG) Dating. Ordinary Dating Method Many firms offer credit terms 2/10, n/30 (read as two ten, net thirty ). This means you get a 2% discount if you pay within 10 days of receiving the invoice. You must pay the bill within 30 days or you start to incur interest charges. Remember: Start counting the days on the day after the date on the invoice. Example: Laura received an invoice of $3060.50 dated May 31, terms 3/15, n/30. She paid it in full on June 14. What amount did she pay? Solution: Date of invoice : May 31 Day 1 of the : June 1 Last day of the : June 15 Date of payment : June 14 (customer will get a discount) Use the net price formula from the trade discount calculation. N = (1 d) L N = (1 0.03) 3060.50 = 0.97 3060.50 N = $2968.69 End of Month Dating Method Sometimes the sales terms reads 2/10 n/30 E.O.M., where E.O.M. stands for end of month. This means you get a 2% discount if you pay within the first 10 days of the next month. You must pay the bill within the first 30 days of the next month or you start to incur interest charges. Remember: Start counting the days from the 1 st day of the next month after the invoice is received. Example 5: Newman, Inc. received an invoice for $1500.65 dated June 05, terms 2/10 E.O.M. The invoice is paid on July 10. What is the amount paid? Student review only. May not be reproduced for classes. 4

Solution: Date of invoice June 05 Day 1 of the July 1 Last day of the July 10 Date of payment July 10 Use the net price formula from the trade discount calculation. N = (1 d) L N = (1 0.02) 1500.65 = 0.98 1500.65 N = $1470.64 Receipt of Goods Dating Method Many firms issue credit terms based on the day goods are received instead of the invoice date. The terms may be written as 2/10 R.O.G., where R.O.G. stands for receipt of goods. This means you get a 2% discount if you pay within the first 10 days after the goods are received. Remember: Start counting the days the day after the goods are received. Example: DMG, Inc. received an invoice of $4750 dated January 10, terms 2/10 n/30 R.O.G., for a shipment that arrived on February 05. What is the last day for taking the cash discount? Solution: Date of invoice January 10 Day 1 of the February 06 Last day of the February 15 PARTIAL PAYMENTS Most sellers allow buyers to make partial payments and take advantage of the discount terms if the partial payment is made within the time specified in the credit terms. When this happens, the discount terms apply only to the partial payment. Again, use your common sense, when a customer takes advantage of the cash discount, it means they should be credited MORE on their invoice than they actually pay. Example: Will Simms, Inc. received an invoice of $15,700 for computer hardware with terms of 4/10, n/30. They sent a cheque for $5,000 within 10 days of receiving the invoice. What amount was Will Simms, Inc. credited on his invoice? What is the balance owing? Solution: Since the partial payment was made within the ten days of the invoice date, Will Simms, Inc. will take advantage of the cash discount of 4% on the $5,000 paid. Use the net price formula from the trade discount calculation. Here N is the AMOUNT OF CASH ACTUALLY PAID, and L IS THE AMOUNT CREDITED ON THE INVOICE. N = (1 d) L 5,000 = (1 0.04) L = 0.96 L 5,000/0.96 = L 5208.33 = L They receive a credit for 5208.33 on their invoice, so the balance remaining is 15,700 5208.33 = $10491.67 Student review only. May not be reproduced for classes. 5

Practice Problems 1. Fill in the blanks with the first and last day of the. No. Payment Terms Date of Invoice Date Goods received a. 2/10, n/30 January 31 January 31 b. c. 3/15, n/60 E.O.M 5/10, 2/20 R.O.G June 20 June 29 May 21 July 03 First day of Last day of 2. A check of $1581.00 was received on June 12 in full payment of an invoice dated June 06, terms 7/10, n/30. What was the net amount of the invoice? 3. Lombard Tennis Ltd. received an invoice dated April 15 from Wimbledon Importers with terms 5/15, n/60 R.O.G for: 50 Tennis rackets at $130.65 each; 500 Tennis Balls at $10.50 each and 130 wristbands for $20.75 each. All items are subject to trade discount of 30% regardless of the payment method. a. If the shipment was received on May 24, what is the last day for payment to get a discount? b. What is the amount due if the invoice was paid in full on June 05? c. Ignore parts (a) and (b). If a partial payment is made on the last day of the discount period to reduce the invoice balance to $5,000, what is the amount of the payment? Solutions 1. No. Payment Terms Date of Invoice Date Goods received First day of Last day of a. 2/10, n/30 January 31 January 31 February 01 February 10 b. c. 3/15, n/60 E.O.M 5/10, 2/10, R.O.G June 20 June 29 July 01 July 15 May 21 July 03 July 04 July 23 2. Since the payment was made before the last day of the, the purchaser was entitled for a 7% cash discount. Amount paid = (1 d) Amount of invoice Amount of invoice = Amount paid/ (1 d) = 1581.00/.93 = $1700.00 3. (a) Last day of Payment = June 08 (b) Total cost of items = (50 130.65) + (500 10.50) + (130 20.75) = $14,480 Net Price after discount = (1 0.3) $14,480 = $10,136 Amount due on June 05 = (0.95) $10,136 = $9629.20 (c) Partial Payment Credit = $10,136 $5000 = $5,136 Amount paid = (0.95) $5,136 = $4879.20 Student review only. May not be reproduced for classes. 6