Data-logger evaluation software GSoft V2.8 1
Data-logging in process with hand-held pressure indicator model CPH6200-S1/-S2 and CPH62I0-S1/-S2 or hand-held thermometer model CTH6200 and GSoft data-logger evaluation software 2
Hand-held with evaluation software Instrument features: CPH6200, CPH62I0 and CTH6200 can store measurement data (logger integrated) Manual or automatical data-logging possible (selectable interval of 1s up to 1h) Storing of up to 16,200 measurement data (depending on model) Pressure Pressure (Ex-Version) Temperature CPH6200 CPH62I0 CTH6200 3
Hand-held with evaluation software Software features: Easy operation due to self-explanatory icon buttons Data from the pressure and temperature hand-helds can be displayed in a single chart Zoom function available Remote operation via PC (Remote-Control) Data can be exported to Excel, etc. Language: English, German, French, Spanish,... Windows TM 95, 98, 2000, XP Vista, Windows 7 4
Start logging (measurement storage) Measuring mode Logger active * cyclic logger was activated via menu before 2sec Initial state: measuring mode to start logging press 2 sec* for Cyclic measurement storage active. Logger is active until stopped manually or logger reaches storage capacity (see next slide) 5
Stop logging (measurement storage) Logger active Stop logger? NO Stop logger? YES Measuring mode Logger can be stopped by pressing 2 Safety function: should logging be stopped? Select via or 7 Button stops logging Initial state: measuring mode 6
Connecting hand-held to PC GSoft offers the possibility to show the logged data on PC as table or diagram Transfer of the logged data via interface cable (RS232 or USB) Logged data 7
User interface of software GSoft 8
1. Interface configuration Interface selection 9
1. Interface configuration Confirmation of selected interface 10
2. Connecting the hand-held Searching hand-held 11
3. Read current status of the device Show current status of the hand-held 12
4. Show current status of the device Read logger data Current sensor measurement data Available logger information 13
5. Show logged data as table Read logged data 14
6. Presettings of the graph Create graph Select graph options 15
7. Presenting data as a graph 16
8. Zoom functionality After marking an area with the left mouse button, the zoomed graph will be shown 17
9. Peak detection via Min/Max memory Peak in the time span between 17:40:03 and 17:40:04 Current measurement at 17:40:04 In addition to the current measured value, the Min/Max values can be stored and shown in the graph as well (Select via the Create New Diagram screen) The example above shows, in the time span between 17:40:03 and 17:40:04 a peak of about 0.64 bar which will be read out and shown in the graph parallel to the current measured data of the time 17:40:04 18
10. Presentation of pressure and temperature date in one graph Both data (pressure and temperature) have to be stored as 2 files, thus both files can be opened and shown in one diagram 19
11. Copy and Paste of logged data GSoft Data export to Excel Highlight data in the table and copy it by using Ctrl+C Paste copied data in Excel by using Ctrl+V 20
11. Contact Contact person for purchase orders Heike Scherf MP-CT Tel +49 9372 132-473 Fax +49 9372 132-217 E-Mail: h.scherf@wika.de Contact person for technical questions Alois Grimm MP-CT Tel +49 9372 132-8916 Fax +49 9372 132-8008916 E-Mail: a.grimm@wika.de 21