Application GSM-R 900 coverage enhancement Outdoor : Cell extension Indoor : Tunnels and confined areas Key Features Medium & High Power Band- & Channel- Selective Digital Smart Filter Outdoor IP65 cabinet HTTP, SNMP Monitoring Benefits Cost effective alternative to BTS Low consumption for solar application Easy & quick installation Contact us Distributore per l Italia : PROTEL SAS Via Magellano 3 A/B6 Cesano Boscone (MI) Tel.: 02 48 60 02 65 To ensure GSM-R coverage everywhere The is designed to enhance outdoor coverage by cell extension as a cost-effective alternative to a BTS, and indoor coverage such as tunnels, warehouses, technical centers with a dedicated DAS (Distributed Antenna System). This range of repeater is extremely modular, and can be equipped with the latest technology: - Available in band- or channel-selective with the optional Digital Smart Filter that permits to treat up to 4 sub-bands - Built in IP65 cabinet for wall- or mast-mounted indoor and outdoor installations - Outdoor power available in medium or high power to optimize the link budget Thanks to the gain limiter, the equipment is able to operate with mobile phones near or far from the repeater without risk of saturation. The low consumption of repeater allows the using of solar panels. Many options are listed: - Embedded monitoring module with WEB/SNMP server for local access (Ethernet) and GPRS modem for remote access - Cloud Monitoring with VisiOmc server - Power supply 230VAC or 48VDC - GFCI, Lightning Protection Class, Automatic Restarter, etc Distributore per l Italia: PROTEL S.a.s www-protel.it protel@protel.it
Frequency band Features Operating bandwidth Gain Ripple in bandwidth Selectivity Output power per channel 1 channel 2 channels 4 channels Spurious emissions all types Noise figure at max gain Time group delay Power supply voltage Power consumption Dimensions Weight Connectors Rating class Temperature range Cooling Signaling (One tricolor led) Remote control MTBF Specified values Downlink : 921-925 MHz Uplink : 876-880 MHz 4 MHz Medium Power : Adjustable from 50 db to 80 db High Power : Adjustable from 60 db to 90 db Downlink + 32 dbm (MP) / + 39 dbm (HP) + 27 dbm (MP) / + 36 dbm (HP) + 22 dbm (MP) / + 33 dbm (HP) ± 2 db 30 db @ ± 400 KHz 40 db @ ± 600 KHz 45 db @ ± 1 MHz 55 db @ ± 5 MHz and beyond - 36 dbm 6 db 4 µs (without Smart Filter option) 230 VAC or 48 DC IEC 60950 accordance Uplink + 15 dbm (MP) / + 18 dbm (HP) + 10 dbm (MP) / + 15 dbm (HP) + 5 dbm (MP) / + 12 dbm (HP) Medium Power : 100 W / High Power : 180 W Medium Power : H582 x L429 x D224 mm High Power : H582 x L429 x D353 mm Medium Power : 28 kg / High Power : 49 kg 7/16 female IP65-30 C to +45 C Convection cooling with heat sink Green : Normal Yellow : Minor alarm Red : Major alarm With embedded GPRS modem Alarms report : By email or SMS Remote Control : Ethernet 100 Base-T 200 000 hours
Digital Smart Filter Module (optional) Number of rejection filters 4 For each filter Bandwidth Central frequency Attenuation Adjustable from 0 to Max. Bandwidth Adjustable from f 0 to f 0 + (Max. Bandwidth / 2) Adjustable from 0 db to 30 db Screen of Setting Software BTS Repeater P P P f f f Input signal Digital Signal Processing: Sub-band filtering Output signal Because the output power of a repeater is composite, the unwanted carriers have sometimes to be eliminated to use the complete dynamic of gain for the useful carriers. The Digital Smart Filter permits to select the carriers to repeat with a specific mask filter, easy to program thanks to the provided software.
Mounting Plan
Ordering Information AIRREP-P-GSMR900-BW-PS Variable Designation Value Meaning P = PS = BW = Output Power Power Supply Bandwidth MP HP Medium Power High Power (for Single-Band only) 230 230 VAC 48 48 VDC 4 GSM-R 9 ER-GSM Options Variable Designation Monitoring Options Digital Functions Electrical Options (only for 230VAC Version) AIRREP-OPT- SERIALREMOTE AIRREP-OPT-IPMTG AIRREP-OPT-LIGHT AIRREP-OPT-RJ45WP AIRREP-OPT-DSF-F (F=08, 09, 18, 21, 26) AIRREP-OPT-GFCI AIRREP-OPT-AR AIRREP-OPT-LP USB-RS485 Remote Monitoring Module IP-GPRS/GSM Led Bicolor Option AIRREP-OPT-IPMTG mandatory RJ45 waterproof connector Option AIRREP-OPT-IPMTG mandatory Digital Smart Filter Hardware & Software Key For Dual-Band, 1 option per band is required if digital advanced features are required for each band GFCI (Ground Fault Circuit Interrupter) Automatic Re-starter (Option AIRREP-OPT-GFCI mandatory) Lightning Protection (Option AIRREP-OPT-GFCI mandatory)
Cabin protection Related Products Protection against Sunlight and Rain Compatible with all SELECOM Repeaters Easy installation Support for laptop or measuring device Electrical Case GPRS Modem Outdoor case Cost effective solution Isolation Transformer GFCI Re-starter Service Outlet CE compliant Custom design on request For the remote control via GPRS network NMS (Network Management System) NMS software manages a complete network of different Screens with complete status and reports Location on a map of each equipment SMS, EMAIL alerts Equipment control in case of needing Solar panels Free Energy Battery for autonomy in case of lack of sunlight Automatic relay to standard power supply Ecological solution Couplers Antennas Feeders Balanced couplers (1 to 2, 1 to 3, 1 to 4) Unbalanced couplers (1/3-2/3; 1/5-4/5; 1/10-9/10) For all types of antenna combinations Donor antenna Wall mounted antennas indoor Ceil mounted antennas indoor Coaxial feeders Radiating cables