Shamrock Scientific Specialty Systems, Inc. Blank Labels for Thermal, Laser & Dot Matrix Printers

Shamrock Scientific Specialty Systems, Inc. Blank Labels for Thermal, Laser & Dot Matrix Printers Labels & Tapes Manufactured In The USA

Shamrock s Mission Our mission is to supply quality, innovative labeling systems to the healthcare industry that help protect patient safety, fulfill modern technological needs and remain cost effective. Environmental Policy It is Shamrock s policy to provide a safe and healthy workplace for our employees and to be an environmentally responsible neighbor in our community. From product manufacture through shipping, in both office and production facilities, Shamrock supports comprehensive programs designed to positively impact the safety of our population and natural resources. SUSTAIN National Patient Safety Goals Joint Commission National Patient Safety Goals Sustained with Shamrock Labels Goal 1. Improve the accuracy of patient identification. Goal 2. Improve the effectiveness of communication among caregivers.

Blank Labels for On-Demand Printing BLANK LABELS FOR THERMAL PRINTERS THERMAL LABELS FOR THE LABORATORY THERMAL LABELS FOR THE BLOOD BANK THERMAL LABELS FOR THE PHARMACY THERMAL LABELS FOR PATIENT CHARGE THERMAL LABEL MATERIALS THERMAL PRINTER SUPPLIES BLANK LABELS FOR LASER PRINTERS LASER LABELS FOR THE LABORATORY LASER LABELS FOR THE PHARMACY LASER LABELS FOR PATIENT CHARGE BLANK LABELS FOR DOT MATRIX PRINTERS PINFED LABELS FOR THE LABORATORY PINFED LABELS FOR THE PHARMACY PINFED LABELS FOR PATIENT CHARGE General Purpose Thermal Labels Desktop Printer Labels Cerner/Pathnet Software Labels Cerner DHT Software Labels Cerner Citation Software Labels SCC Softlab Software Labels Sunquest/Misys Software Labels Sunquest Antrim Software Labels SMS Software Labels McKesson/Horizon Software Labels MEDITECH Software Labels VA Hospital Software Labels HMS Software Label Health Science Systems Software Label CPSI Software Label Additional Laboratory Software Labels ISBT 128 Software Labels Pharmacy Software Labels Unit Dose Labels Label Forms Armed Forces Pharmacy Label Piggyback Labels Stock Thermal Materials Special Application Thermal Materials Ribbons for Thermal Transfer Printers Clean Cards for Thermal Printers General Purpose Laser Labels Microscope Slide Labels Labels for Unique Conditions Unit Dose Labels Label Forms Outpatient Label/Bond Paper Forms Piggyback Labels Single-Ply Labels General Purpose Pinfed Labels Mailing Labels Labels for Laboratory Software Labels for Pharmacy Software Unit Dose Labels Label/Paper Forms Piggyback Labels Three-Part Labels BL-4 BL-8 BL-9 BL-13 BL-14 BL-14 BL-15 BL-18 BL-18 BL-19 BL-20 BL-20 BL-20 BL-20 BL-20 BL-21 BL-23 BL-25 BL-25 BL-25 BL-25 BL-26 BL-27 BL-27 BL-28 BL-28 BL-29 BL-30 BL-30 BL-31 BL-31 BL-31 BL-34 BL-34 BL-35 BL-36 BL-37 BL-41 BL-43 BL-43 BL-44 BL-44

Shamrock Scientific Specialty Systems, Inc. SHAMROCK SUPPLIES LABELS COMPATIBLE WITH ALL SOFTWARE PROGRAMS INCLUDING: Cerner/Pathnet Cerner Citation Cerner DHT CPSI Health Science Systems HMS IDX Elekta/Impac McKesson/Horizon MEDITECH MedLab Orchard SCC Softlab SMS Sunquest Antrim Sunquest/Misys VA Hospital SHAMROCK BLANK LABELS FOR ON-DEMAND PRINTING Shamrock offers blank labels in a wide variety of sizes and formats for your Thermal, Laser and Dot Matrix on-site printing. Labels are available for use with any software, whether used in stand-alone departmental operations or interfaced with your facility s IT system. Stock labels feature top quality, latex free materials and glove friendly adhesives. Unique premium materials are available as well. See page BL-27 for further information. BL-2

Blank Labels For On-Demand Printing Shamrock STOCK BLANK labels for THERMAL, LASER AND DOT MATRIX printers Thermal Direct Labels for Printers with a Heated Printhead Thermal Transfer Labels for Printers using a Ribbon for Printing Shamrock Thermal Labels are available for standard or IR scanning and may be supplied with indexing bars, holes or notches. Should your printer require a core size and/or number of labels per roll different from our stock, just let us know. Shamrock can supply labels to perfectly meet your requirements. Laser Labels Shamrock Laser Labels, offered in a range of sizes to answer the labeling needs of every procedure in your laboratory, run trouble free through your printer. Stock label formats are supplied on 8 1 /2" x 11" sheets, custom configurations are available upon request. Pinfed Labels for Dot Matrix Printers Shamrock Pinfed Labels won t jam in your dot matrix printer, offer a clear, easy-to-read imprint to facilitate communication. Special label materials are available. Shamrock supplies blank labels for unique labeling requirements Special materials that stand up to harsh temperature extremes, water baths and solvents. Labels tinted in whole or with color bars to highlight information. You choose from 31 stock colors. BL-3

Specialty Labels for Thermal Printers All Shamrock Thermal Labels are available in materials for use with thermal direct printers using a heated printhead or for thermal transfer printers that require a ribbon for printing. Labels will be supplied on 3" cores, for thermal direct printing unless otherwise specified. See page BL-27 for information on both stock and special label materials that are available. If you need a label size or configuration not illustrated, please contact Shamrock. We can supply labels produced to your exact specifications. Specialty General Purpose Thermal Labels THERM-100R 3 8" x 1 1 4" THERM-366R 1 2" x 3 8" THERM-487R 1 2" x 1 1 2" THERM-504R 5 8" x 7 8" THERM-521R 5 8" x 7 8" THERM-448R 5 8" x 1" THERM-617R 5 8" x 1" THERM-547R 5 8" x 1 11 16" THERM-643R 5 8" x 2 1 2" THERM-425R 5 8" x 2 5 8" THERM-754R 5 8" x 3 1 4" THERM-528R 5 8" x 4" THERM-756R 11 16" x 3 1 2" THERM-520R 3 4" x 2" See page BL-27 for information on stock & special thermal label materials available. THERM-305R 3 4" x 3 4" THERM-566R 3 4" x 1 1 2" THERM-486R 3 4" x 2 1 2" THERM-628R 7 8" x 1 1 2" THERM-364R 3 4" x 2 1 4" THERM-755R 7 8" x 1 1 4" BL-4

THERM-108R 7 8" x 4" Stock labels are white. Color may be added to your specifications. THERM-491R 7 8" x 1 27 32" THERM-123R 1" x 15 16" THERM-125R 1" x 1 1 2" (Non-IR Readable) THERM-5R (IR Readable) THERM-570R 1" x 1 3 4" THERM-263R 1" x 2 1 16" (1 1 4" Repeat) THERM-632R 1" x 2 5 16" (1 3 16" Repeat) THERM-492R 1" x 3" THERM-CEQ 1" x 3" (Transfer Kimdura Material) THERM-CEQ-OP 1" x 3" (White Opaque Polyester Material) THERM-467R 1" x 3" (1 1 4" Repeat) THERM-126R 1" x 3 1 2" THERM-330R 1" x 3 1 4" THERM-524R 1 1 16" x 1 11 16" THERM-759R 1 1 8" x 2 1 4" THERM-128R 1 1 8" x 3 1 2" THERM-545R 1 3 16" x 2" THERM-751R 1 1 4" x 2 1 2" THERM-558R 1 1 4" x 2 1 4" THERM-567R 1 3 8" x 2" BL-5

Specialty General Purpose Thermal Labels THERM-132R 1 3 8" x 3 3 4" THERM-133R 1 3 8" x 4 1 4" THERM-523R 1 1 2" x 1" THERM-427R 1 1 2" x 1 1 2" (Non-IR Readable) THERM-1R 1 1 2" x 1 1 2" (IR Readable) THERM-761R 1 1 2" x 2" THERM-613R 1 5 8" x 1 5 8" THERM-750R 1 3 4" x 1 1 4" THERM-150R 1 3 4" x 2 7 8" THERM-207R 1 3 4" x 2 7 8" THERM-563R 1 3 4" x 3" THERM-7554R 1 7 8" x 1 7 8" THERM-534R 2" x 2" THERM-506R 2" x 3" See page BL-27 for information on stock & special thermal label materials available. THERM-331R 2" x 3 1 4" THERM-358R 2" x 4" THERM-161R 2 3 8" x 3 1 4" THERM-164R 2 3 8" x 3 3 4" BL-6

Stock labels are white. Color may be added to your specifications. THERM-479R 2 1 2" x 1 11 32" THERM-177R 2 1 2" x 4" (2 3 4" Repeat) THERM-644R 2 1 2" x 4" THERM-642R 2 7 8" x 3 1 4" THERM-398R 2 7 8" x 4" THERM-611R 2 7 8" x 4 1 8" THERM-341R 3" x 1" THERM-634R 3" x 1" THERM-306R 3" x 1 1 8" THERM-356R 3" x 1 1 2" THERM-752R 3" x 1 3 4" THERM-316R 3" x 3" THERM-320R 3" x 4" THERM-500R 3" x 5" White THERM-500R-2 3" x 5" Yellow THERM-324R THERM-345R 3 1 8" x 2 1 4" 3 1 8" x 3 4" THERM-321R 3 1 4" x 1 15 16" (3 1 2" repeat) THERM-310R 3 3 8" x 2 1 8" THERM-529R 3 3 8" x 5 1 4" BL-7

Specialty General Purpose Thermal Labels THERM-539R 3 1 2" x 1" THERM-462R 3 1 2" x 1 1 4" THERM-543R 3 7 8" x 1 7 8" THERM-645R 4" x 1 1 16" THERM-357R 4" x 2" See page BL-27 for information on stock & special thermal label materials available. THERM-162R 4" x 2 3 8" THERM-332R 4" x 3 1 4" THERM-340R 6" x 2" THERM-405R 6" x 4" Specialty Thermal Labels for Desktop Printers Shamrock offers thermal labels for on-demand use with your small desktop printer. Labels are precisely designed for trouble free use in these specialized printers, producing clear, easy to read text and/or bar codes. Stock desktop printer labels feature direct thermal material and are supplied on a 1" core. Front Back THERM-2611R-DO 4" x 2 5 16" 250 per roll THERM-2612R-DO 4" x 2 5 16" 250 per roll THERM-1716R-DO 3 15 16" x 2 1 8" 220 per roll THERM-1710R-DO 3 1 2" x 2" 300 per roll THERM-1416R-DO 2 1 8" x 1" 500 per roll THERM-1791R-DO 1 1 4" x 2 1 4" 1,000 per roll THERM-1839R-DO 15 16" x 15 16" THERM-1840R-DO 1" x 1" 750 per roll Shamrock supplies thermal labels for tabletop imprinters in a wide range of sizes and materials. Please call 800-323-0249 for complete information. BL-8

Specialty Thermal Labels for the Laboratory CERNER/PATHNET THERM-396R 7 8" x 2" THERM-1213OPR 15 16" x 15 16" (4 up) White Opaque Polyester Material for use with Premium Wax/Resin Transfer Printer Ribbon 1 1 8" x 1" THERM-1221R 1 1 8" x 2" THERM-760R 1 1 4" x 2" Stock labels are white. Color may be added to your specifications. 11 16" x 1 1 16" 1 1 4" x 1" 1 3 8" x 4" 1 3 8" x 2 1 8" THERM-1222R 1 1 4" x 2" THERM-550R 1 3 8" x 8 1 2" EVERY OTHER LABEL 1 1 16" x 2 1 4" 1 3 4" x 3 1 4" 1 1 16" x 1 4" 1 11 16" x 1 1 4" THERM-552R 1 3 4" x 8 1 2" (1 27 32" Repeat) 2 1 8" x 3 1 2" 1 3 8" x 2 3 8" 1 1 4" x 2" THERM-553R 2 1 8" x 8 1 2" 3 4" x 1 3 16" 15 16" x 1" THERM-1294R 2 3 16" x 2" White THERM-1294R-2 2 3 16" x 2" Yellow (Perforations) 1 1 4" x 2" 15 16" x 1" 15 16" x 1" 15 16" x 1" 1 1 4" x 2" Horizontal slit in liner allows bottom portion of label to be affixed to tube without exposing adhesive on aliquot labels THERM-1295R 2 3 16" x 2" White THERM-1295R-2 2 3 16" x 2" Yellow (Die Cuts) THERM-1157R 2 3 16" x 4" (Die Cuts) 1 1 4" x 2" THERM-1296R 2 3 16" x 4" (Perforations) BL-9

Specialty Thermal Labels for the Laboratory CERNER/PATHNET 2 3 16" x 3 1 2" 1 1 4" x 2" THERM-382R 2 3 16" x 7 1 2" THERM-1297R 2 3 16" x 7 1 2" Horizontal slit in liner (Perforations) 15 16" x 1" Horizontal slit in liner for THERM-1297R only 1 1 4" x 2" 2 3 16" x 3 1 2" Horizontal slit in liner for THERM-1299R only 15 16" x 1" THERM-1298R 2 3 16" x 7 1 2" THERM-1299R 2 3 16" x 7 1 2" Horizontal Slit in Liner (Die Cuts) 1 1 4" x 2 1 8" 2 1 4" x 4 1 4" 1 2" x 1 1 16" 1" x 1 1 16" THERM-554R 2 1 4" x 8 1 2" 3 16" x 1 1 8" 5 8" x 1 3 16" See page BL-27 for information on stock & special thermal label materials available. 2 1 2" x 1 3 8" 2 1 2" x 1 1 16" 2 5 16" x 1 1 8" 1 1 4" x 1 1 8" 1 1 4" x 2 1 4" 1 1 4" x 3 4" 1 1 4" x 1 1 8" THERM-371R 2 1 2" x 2 1 8" (2 3 4" Repeat) THERM-7825R 2 1 2" x 2 1 4" THERM-1300R 2 1 2" x 2 1 4" THERM-1301R 2 1 2" x 2 1 4" (Non-IR Readable) THERM-1301R-IR 2 1 2" x 2 1 4" (IR Readable) BL-10

CERNER/PATHNET 2 1 2" x 1 1 8" 1 1 4" x 1 1 8" 2 1 2" x 1 1 8" 1 1 4" x 1 1 8" 7 8" x 2" 1 1 4" x 2 1 2" Stock labels are white. Color may be added to your specifications. 3 4" x 1" 1 1 4" x 1 1 4" THERM-782R 2 1 2" x 2 1 4" (Die Cuts) THERM-489R 2 1 2" x 2 1 4" (Perforations) THERM-785R 2 1 2" x 4" THERM-783R 2 1 2" x 2 1 2" 1 1 4" x 2 5 8" 1 1 4" x 2 5 8" 1 1 4" x 1 5 16" THERM-343R 2 1 2" x 4" 1 1 4" x 1 5 16" THERM-787R 2 1 2" x 5 1 4" (Perforations) THERM-786R 2 1 2" x 5 1 4" (Die Cuts) 1 1 4" x 2 1 2" 2 1 2" x 3 1 2" THERM-327R 2 1 2" x 8 1 2" (Die Cuts) 1 1 4" x 1 1 4" 1 1 4" x 2 1 2" 2 1 2" x 3 1 2" 1 1 4" x 1 1 4" THERM-344R 2 1 2" x 8 1 2" (Perforations) BL-11

Specialty Thermal Labels for the Laboratory CERNER/PATHNET 1 1 4" x 2 1 2" 2 1 2" x 3 1 2" 5 8" x 1 1 4" THERM-556R 2 1 2" x 8 1 2" THERM-1303R 3" x 5" White THERM-1303R-2 3" x 5" Yellow 15 16" x 1" 15 16" x 15 16" 2 5 16" x 4" 1 1 4" x 2" 1 5 16" x 2" 1 1 4" x 2" 2 5 16" x 4" 2 1 4" x 4" THERM-623R 3 9 16" x 4" See page BL-27 for information on stock & special thermal label materials available. 2 5 16" x 2" Liner perf for THERM-1306R only THERM-571R 4 1 2" x 4" THERM-1306R 4 1 2" x 4" Vertical perforation thru liner 1 16" left of center THERM-1307R 4 1 2" x 4" THERM-1307R-Z 4 1 2" x 4" (1 1 2" Core for use with Zebra printer) 2 5 16" x 4" 15 16" x 1" 1 1 4" x 2" 4 1 2" x 4" THERM-1305R-2 Yellow THERM-1305R-4 Red THERM-1305R-6 Blue (With Highlight Bars) 4 1 2" x 4" THERM-788R-2 Yellow THERM-788R-4 Red THERM-788R-6 Blue (With Highlight Bars) 15 16" x 1" 1 1 4" x 2" THERM-1305R 4 1 2" x 4" White THERM-788R 4 1 2" x 4" White BL-12

CERNER DHT 1 3 4" x 2 1 8" 11 16" x 1 1 16" 1 1 16" x 2 1 8" Stock labels are white. Color may be added to your specifications. THERM-1453R 1 3 4" x 8 15 32" 2 3 16" x 1 3 32" 3 1 4" x 2 3 8" 2 5 8" x 3 3 10" 2 11 16" x 3 9 32" 1 1 8" x 2 1 8" 4 10" THERM-1201R 4 7 8" x 3 9 32" 1 1 4" x 5 8" 2 3 16" x 1 1 10" 1 1 4" x 1 3 4" THERM-1455R 5 15 16" x 3 3 10" THERM-1456R 7" x 2 3 8" BL-13

Specialty Thermal Labels for the Laboratory CERNER CITATION THERM-513R 1" x 2" THERM-775R 1" x 3 1 8" 1" x 2 1 2" 1" x 5 8" 3 4" x 2" 3 4" x 1 1 8" THERM-1457R 1" x 3 1 8" 1 2" x 2" 1 2" x 1 1 8" THERM-1225R 1 1 4" x 3 1 8" SCC SOFTLAB 1 3 8" x 2 1 8" 11 16" x 7 8" See page BL-27 for information on stock & special thermal label materials available. THERM-466R 1" x 2 1 2" (Non-IR Readable) THERM-2R 1" x 2 1 2" (IR Readable) 11 16" x 7 8" THERM-1458R 1 3 8" x 3" 1 3 8" x 2 1 8" 1 3 8" x 2 1 8" 11 16" x 7 8" THERM-1458R-B4 1 3 8" x 3" Red Border THERM-1458R-B2 1 3 8" x 3" Yellow Border BL-14

SUNQUEST/MISYS Stock labels are white. Color may be added to your specifications. 7 8" x 7 8" THERM-1318R Thermal Direct THERM-1318R-T Thermal Transfer THERM-1318OPR Thermal Transfer Opaque Polyester, Xylene Resistant 1" x 2 1 4 " THERM-1319R-T ( 1 8" gap between labels) Thermal Transfer DuraStick Material for Cold Temperature Use 19 32" x 1" 19 32" x 1" 1 3 16" x 2" 19 32" x 1" 19 32" x 1" 1 3 16" x 2" 1 3 16" x 4 3 32" (Non-IR Readable) THERM-451R White THERM-451R-2 Yellow (IR Readable) THERM-3R White THERM-3R-2 Yellow 1 3 16" x 4 3 32" (Non-IR Readable) THERM-451R-B2 Yellow Border THERM-451R-B3 Green Border THERM-451R-B4 Red Border THERM-451R-B6 Blue Border (IR Readable) THERM-3R-B2 Yellow Border THERM-3R-B3 Green Border THERM-3R-B4 Red Border THERM-3R-B6 Blue Border 19 32" x 1" 19 32" x 1" 19 32" x 1" 19 32" x 1" 1 3 16" x 2" 1 3 16" x 2" 1 3 16" x 4 3 32" Core Size 1 1 2" (Non-IR Readable) THERM-1308R White THERM-1308R-2 Yellow (IR Readable) THERM-15R White THERM-15R-2 Yellow 1 3 16" x 4 3 32" Core Size 1 1 2" (Non-IR Readable) THERM-1308R-B2 Yellow Border THERM-1308R-B3 Green Border THERM-1308R-B4 Red Border THERM-1308R-B6 Blue Border (IR Readable) THERM-15R-B2 Yellow Border THERM-15R-B3 Green Border THERM-15R-B4 Red Border THERM-15R-B6 Blue Border 19 32" x 1" 19 32" x 1" 9 16" x 1" 1 3 16" x 2" 1 5 16" x 2 1 16" 3 4" x 1" 1 3 16" x 4 3 32" (w/sensor Bar) Core Size 1 1 2" (Non-IR Readable) (IR Readable) THERM-1308R-SB THERM-15R-SB 1 5 16" x 3 1 16" (Non-IR Readable) THERM-1311R (IR Readable) THERM-1311R-IR BL-15

Specialty Thermal Labels for the Laboratory SUNQUEST/MISYS 9 16" x 1 3 8" 9 16" x 1 3 8" 1 7 16" x 2 1 4" 1 7 16" x 2 1 4" 7 8" x 1 3 8" 7 8" x 1 3 8" 1 7 16" x 3 5 8" (Die Cuts) THERM-374R White THERM-374R-2 Yellow 1 7 16" x 3 5 8" (Die Cuts) THERM-374R-B2 Yellow Border THERM-374R-B3 Green Border THERM-374R-B4 Red Border THERM-374R-B6 Blue Border 9 16" x 1 3 8" 9 16" x 1 3 8" 1 7 16" x 2 1 4" 1 7 16" x 2 1 4" 7 8" x 1 3 8" 7 8" x 1 3 8" 1 7 16" x 3 5 8" (Perforations) THERM-1309R White THERM-1309R-2 Yellow 1 7 16" x 3 5 8" (Perforations) THERM-1309R-B2 Yellow Border THERM-1309R-B3 Green Border THERM-1309R-B4 Red Border THERM-1309R-B6 Blue Border 9 16" x 1 1 16" 9 16" x 1 1 16" 1 7 16" x 2" 1 7 16" x 2" 7 8" x 1 1 16" 7 8" x 1 1 16" 1 7 16" x 3 1 16" (Die Cuts) THERM-541R White See page BL-27 for information on stock & special thermal label materials available. 9 16" x 1 1 16" THERM-541R-2 Yellow 1 7 16" x 3 1 16" (Die Cuts) THERM-541R-B2 Yellow Border THERM-541R-B3 Green Border 9 16" x 1 1 16" THERM-541R-B4 Red Border THERM-541R-B6 Blue Border 1 7 16" x 2" 1 7 16" x 2" 7 8" x 1 1 16" 7 8" x 1 1 16" 1 7 16" x 3 1 16" (Perforations) THERM-1310R White THERM-1310R-2 Yellow 1 7 16" x 3 1 16" (Perforations) THERM-1310R-B2 Yellow Border THERM-1310R-B4 Red Border THERM-1310R-B3 Green Border THERM-1310R-B6 Blue Border BL-16

SUNQUEST/MISYS 1 3 4" x 2 5 8" Stock labels are white. Color may be added to your specifications. 1 3 16" x 2 1 16" 7 8" x 7 8" 19 32" x 1 1 32" THERM-1313R 2 3 8" x 2 1 16" Core Size 1 1 2" or 3" please specify THERM-1314R 5 1 4" x 2 5 8" ( 1 /4" gap between labels) Core Size 1 1 2" or 3" please specify 2 1 16" x 3 4" 2 3 8" x 3 4" 3 3 8" x 1 1 4" 5 5 8" x 2 1 2" 5 8" x 1 2" 1 7 8" x 3 4" 7 10" x 9 16" 2 3 8" x 3 4" 5 8" x 1 2" 3 1 8" x 1 1 8" 2 3 16" x 3 4" THERM-1315R 6 5 8" x 3 3 4" ( 1 /4" gap between labels) Core Size 1 1 2" THERM-1316R 7 1 8" x 4" THERM-1317R 7 1 8" x 4" BL-17

Specialty Thermal Labels for the Laboratory SUNQUEST ANTRIM EVERY OTHER LABEL 1 7 32" x 2 1 3" 1 7 32" x 2" THERM-1460R 1 7 32" x 8 15 32" SMS 1 1 4" x 2 1 4" 3" x 3 31 32" 1 2" x 1 1 4" THERM-1459R 3" x 8 15 32" 2" x 4 1 4" 1 3 8" x 2 1 8" See page BL-27 for information on stock & special thermal label materials available. 5 8" x 1 1 16" THERM-792R 6" x 4 1 4" (6 1 2" repeat) (Non-IR Readable) THERM-7R 6" x 4 1 4" (6 1 2" repeat) (IR Readable) THERM-792R-4 6" x 4 1 4" (6 1 2" repeat) THERM-7R-4 6" x 4 1 4" (6 1 2" repeat) THERM-792R-3 6" x 4 1 4" (6 1 2" repeat) THERM-7R-3 6" x 4 1 4" (6 1 2" repeat) BL-18

McKESSON/HORIZON 15 16" x 15 16" 1 3 8" x 2" THERM-1212R 7 8" x 3 3 8" 19 32" x 1" 19 32" x 1" THERM-304R 1 3 8" x 2 15 16" 7 16" x 15 16" Stock labels are white. Color may be added to your specifications. 1 3 16" x 1 7 8" THERM-325R 1 3 16" x 3 15 16" 15 16" x 1 3 4" 3 3 8" x 4" 1 7 16" x 2 1 4" 1 2" x 1 3 4" THERM-1451R 1 7 16" x 4" 1 1 8" x 2" 15 16" x 1 3 4" 1 7 16" x 2 1 4" 1 2" x 1 3 4" THERM-1451R-B5 1 7 16" x 4" 3 8" x 1 3 16" 3 8" x 1 1 4" 3 8" x 1 9 16" THERM-1452R 6" x 4" BL-19

Specialty Thermal Labels for the Laboratory MEDITECH Front Back 5 8" x 2" 1 1 4" x 2" 3 3 8" x 2 1 4" THERM-478R 1 1 4" x 4" (Non-IR Readable) White THERM-4R 1 1 4" x 4" (IR Readable) White 1 1 8" x 2 1 4" 5 8" x 2" 1 1 4" x 2" 9 16" x 3 4" THERM-1794R 5 1 4" x 3 3 8" VA HOSPITAL THERM-478R-B4 1 1 4" x 4" (Non-IR Readable) Red Border THERM-4R-B4 1 1 4" x 4" (IR Readable) Red Border Labels also available with Yellow (B2), Green (B3) or Blue (B6) Border HMS 1 1 4" x 5 8" 1" x 2" 1" x 2" 7 8" x 1" 1 1 4" x 1" 2 1 4" x 1" 1 2" x 1" 1 1 2" x 1" 3 3 4" x 4" 1" x 2" 2 3 4" x 1" 1 1 4" x 1 1 4" 4" x 1" 1 2" x 1" 7 8" x 1" 1 2" x 1" THERM-1788R 4" x 3 3 8" 1 3 4" x 1 1 4" 2 3 4" x 1" 15 16" x 2" 13 16" x 2" THERM-329R 4" x 2 3 8" (Non-IR Readable) THERM-M-10R 4" x 2 3 8" (IR Readable) THERM-1807R 5 1 2" x 3 1 4" THERM-1450R 5 1 2" x 4" HEALTH SCIENCE SYSTEMS CPSI See page BL-27 for information on stock & special thermal label materials available. 1" x 2 1 16" 7 8" x 11 16" THERM-757R 15 16" x 3 1 2" THERM-1454R 3" x 4 1 8" (w/sensor Bar) BL-20

ADDITIONAL THERMAL LABELS FOR THE LABORATORY 1" x 2 1 2" 1 2" x 1" 9 16" x 1 7 8" Stock labels are white. Color may be added to your specifications. THERM-315R 1" x 3 1 2" THERM-456R 1 1 8" x 1 7 8" 5 8" x 1" 7 8" x 1 3 8" 1 1 4" x 2" 5 8" x 1" 1 2" x 1 3 8" THERM-776R 1 1 4" x 4" THERM-314R 1 3 8" x 1 3 8" 11 16" x 7 8" 1 3 8" x 2 1 2" 1 3 8" x 5 8" THERM-777R 1 3 8" x 4" 3 4" x 3" 15 16" x 3 11 16" 13 16" x 2 11 16" 3 16" x 1" THERM-779R 1 1 2" x 3" THERM-780R 1 3 4" x 3 11 16" 1 3 4" x 2 1 8" 1 1 16" x 2 1 8" 11 16" x 1 1 16" THERM-551R 1 3 4" x 8 7 16" BL-21

Specialty Thermal Labels for the Laboratory ADDITIONAL THERMAL LABELS FOR THE LABORATORY 21 32" x 2 1 2" 1 1 2" x 2 3 8" 1 1 2" x 1 3 4" 1 7 8" x 2 11 16" THERM-608R 1 31 32" x 2 1 2" 5 8" x 1 1 32" THERM-781R 2 1 8" x 4 1 8" 1 2" x 2 11 16" THERM-165R 2 3 8" x 5 3 8" 1 1 4" x 2" 2 1 2" x 3 1 2" 1 1 4" x 2" 5 8" x 1" 5 8" x 1" THERM-784R 2 1 2" x 4" THERM-555R 2 1 2" x 7 1 2" 1 1 2" x 2 3 8" 1 3 8" x 2" 11 16" x 1 11 16" 1 3 16" x 8 1 2" 19 32" x 1 3 8" 29 32" x 1 3 8" 9 16" x 1 5 16" 1 7 16" x 1 13 16" 7 8" x 1 5 16" 1 7 16" x 7 16" THERM-362R 2 3 4" x 2" THERM-557R 2 3 4" x 8 1 2" THERM-389R 3 3 4" x 1 1 2" 3 4" x 1" 1 1 4" x 2 1 4" 5 8" x 1 1 8" 2 3 4" x 4" 2 5 16" x 4" 3 3 4" x 2 3 4" See page BL-27 for information on stock & special thermal label materials available. 1 1 4" x 2" 1 1 4" x 2" 1 1 4" x 2 3 4" 3 4" x 1" THERM-565R 4 13 16" x 4" (5" repeat) THERM-789R 5" x 6 3 8" THERM-791R 6" x 4" BL-22

Specialty Thermal Labels for the Blood Bank Shamrock Thermal Labels for the Blood Bank are designed in compliance with the US Industry Consensus Standard for the Uniform Labeling of Blood and Blood Components Using ISBT 128. They feature adhesive that is glove friendly and compositionally compliant with FDA 21 CFR 175.105. A statement of compliance is available from Shamrock upon request. SINGLE PLY THERMAL LABELS Shamrock offers labels in Thermal Direct and Thermal Transfer materials for general use and in Kimdura Thermal material, recommended for your more demanding procedures. Labels are supplied on Thermal Direct unless otherwise specified. To request Transfer material add the suffix -T to the basic catalog number. For Kimdura Transfer add the suffix -KT. 3 /4" x 2" Stock labels are white. Color may be added to your specifications. These 4" x 4" labels may be ordered with a vertical slit in liner to expose 1 /2" strip of adhesive for labels use on Neonatal syringes. SB128-44 4" x 4" (no liner slit) SB128-44-S 4" x 4" (liner slit) Base Label 800 labels per roll SB128-44-DIN 4" x 4" (no liner slit) SB128-44-DINS 4" x 4" (liner slit) Base Label 1,400 labels per roll 3 /4" x 2" 1 1 /4" x 2" 2" x 2" 2" x 2" SB128-44-P 4" x 4" (no DIN cutout) Base Label 1,400 labels per roll SB128-44-DIN-P 4" x 4" Base Label 1,400 labels per roll SB128-582 5 /8" x 2" For 1 /3 quadrant labeling 4,500 labels per roll SB128-12 1" x 2" For 1 /2 quadrant labeling 3,000 labels per roll SB128-22 2" x 2" SB128-24 2" x 4" For 1 quadrant labeling 1,600 labels per roll For 2 quadrant labeling 1,600 labels per roll BL-23

Specialty Thermal Labels for the Blood Bank PIGGYBACK THERMAL LABELS Special construction piggybacks labels onto a pressure-sensitive carrier sheet. After printing, the carrier sheet is placed on the blood bag and individual labels are dispensed as needed. To meet the requirements of a variety of Blood Bank procedures, Shamrock offers Piggyback Labels in standard Thermal Transfer as well as special PolyFlex Transfer and Kimdura Transfer materials. All materials are compositionally compliant with FDA 21 CFR 175.105. Please call for ordering assistance. 3 1 /8" x 4" THERM-PB1814RT (Thermal Transfer) THERM-PB1814RP (PolyFlex Transfer) THERM-PB1814RKT (Kimdura Transfer) 4 1 /2" x 3 3 /4" THERM-PB1711RT (Thermal Transfer) THERM-PB1711RP (PolyFlex Transfer) THERM-PB1711RKT (Kimdura Transfer) Piggyback Construction 3 1 /4" x 4" THERM-PB1816RT (Thermal Transfer) THERM-PB1816RP (PolyFlex Transfer) THERM-PB1816RKT (Kimdura Transfer) Liner Paper Carrier Sheet Blood Label 7 3 /16" x 4" THERM-PB1815RT (Thermal Transfer) THERM-PB1815RP (PolyFlex Transfer) THERM-PB1815RKT (Kimdura Transfer) 2" x 4" THERM-PB1808RT (Thermal Transfer) THERM-PB1808RP (PolyFlex Transfer) THERM-PB1808RKT (Kimdura Transfer) See page BL-27 for information on stock & special thermal label materials available. 6" x 4" THERM-PB1801RT (Thermal Transfer) THERM-PB1801RP (PolyFlex Transfer) THERM-PB1801RKT (Kimdura Transfer) 5 3 /4" x 3 3 /4" THERM-PB1810RT (Thermal Transfer) THERM-PB1810RP (PolyFlex Transfer) THERM-PB1810RKT (Kimdura Transfer) 2 5 /8" x 4" THERM-PB1787RT (Thermal Transfer) THERM-PB1787RP (PolyFlex Transfer) THERM-PB1787RKT (Kimdura Transfer) BL-24

Specialty Thermal Labels for the Pharmacy Stock labels are supplied on 3" cores for Thermal Direct printing. To request labels for Thermal Transfer printing, add the suffix -T to the catalog number. For example: THERM-490R-T. MISCELLANEOUS THERMAL LABELS FOR THE PHARMACY THERM-490R 1" x 3" Cerner THERM-638R 1" x 4" Cerner 4" x 3 1 2" THERM-642R 2 7 8" x 3 1 4" Stock labels are white. Color may be added to your specifications. THERM-1461R 1" x 3 1 /2" Cerner THERM-637R 1" x 3" Cerner 2" x 3 1 2" 2 7 16" x 3" THERM-535R 2 3 8" x 4" IDX THERM-506R 2" x 3" THERM-1320R 6" x 3 1 2" (Perforation through label and liner) Sunquest 1 2" x 3" THERM-1325R 2 15 16" x 3" THERM-405R 6" x 4" Software UNIT DOSE THERMAL LABELS THERMAL LABEL FORMS FOR THE PHARMACY 1-UP LABELS 2-UP LABELS 2" x 3" 2" x 3" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 3 8" x 3" 1 3 8" x 3" 1" x 1 11 16" UD-THERM-S 1-up, roll form, thermal transfer UD-THERM-S-F 1-up, roll form, thermal transfer, foil backed 1" x 1 11 16" UD-THERM 2-up, thermal transfer UD-THERM-F 2-up, thermal transfer, foil backed 1 2" x 3" 1 2" x 3" 2 5 8" x 3" 1" x 3" 2 5 8" x 3" LASCL-S13TL 4" x 8 1 2" LASCL-S21TL 4" x 8 1 2" THERMAL LABEL FORMS FOR ARMED FORCES PHARMACIES 9 /16" x 3 1 /8" 2 1 /8" x 3 1 /8" 5 /8" x 3 1 /8" 27 /64" x 1 5 /8" 7 /8" x 2 1 /8" 9 /16" x 3 1 /8" 3 /4" x 3 1 /8" 7 /8" x 3 1 /8" THERM-DDAFR 8 3 /8" x 2 3 /4" Thermal Direct BL-25

Specialty Thermal Labels for Patient Charge Systems PIGGYBACK PATIENT CHARGE LABELS Shamrock offers the stock piggyback patient charge labels shown below for use with your direct thermal printer. Call for information on stock labels suitable for thermal transfer printing or formats designed to your individual specifications. Stock Thermal Labels are supplied for Thermal Direct printing unless otherwise specified. Timing bar on liner paper triggers proper printing. MSL-10-5 3 4" x 1 3 8" (Orange color bar) (carrier size 7 8" x 1 7 8") Piggyback, thermal direct label material. Supplied 2,000 labels per roll on a 4" core. Indicate color of bar by placing proper color number after catalog number. (The number 5 in MSL-10-5 indicates color orange). See page BL-44 for color selection. MSL-X-2 15 16" x 1 9 16" (Yellow) (label and carrier same size) Piggyback, thermal direct label material. Adhesivefree area allows easy removal of printed label from its carrier backing. Supplied 3,000 labels per roll on a 1 5 8" core. FRONT BACK MSL-XEE-1.9" x 1.6" (White) (label and carrier same size) Piggyback, thermal direct material. Supplied 3,000 labels per 6" dia. roll. Patient Charge Labels are available in the 8 standard colors listed on page BL-44. THERM-PB1419R-2 1 2" x 1 1 2" (Yellow) (carrier size 3 4" x 1 3 4") THERM-PB992R-2 3 4" x 1 3 4" (Yellow) (carrier size 7 8" x 1 7 8") THERM-PB1142R-1 7 8" x 1 7 8" (White) (carrier size 1" x 2") THERM-PB548R-2 1" x 2" (Yellow) (carrier size 1 1 8" x 2 1 4") THERM-PB1148R-7 1" x 2" (Pink) (carrier size 1 1 4" x 2 1 4") BL-26

Specialty Thermal Label Materials Standard Thermal Label Materials Material Thermal Direct DESCRIPTION Permanent adhesive won t stick to gloves. May be applied at 32 F (0 C), holds in temperatures ranging from -75 F to 200 F (-60 C to 93 C). Thermal Transfer Bright white in color and smudge resistant. Permanent adhesive won t stick to gloves. May be applied at 32 F (0 C), holds in temperatures ranging from -75 F to 200 F (-60 C to 93 C). Sticks to most surfaces including plastic and curved. Stock Thermal Labels are supplied on 3" cores for Thermal Direct printing unless otherwise specified. To order stock labels in Thermal Transfer material, please add the suffix -T to the catalog number. Specialty Thermal Label Materials for Special Applications Material Thermal Direct IR Readable Thermal Direct Piggyback Thermal Direct Tight Release Thermal Direct Removable DESCRIPTION White smudge resistant surface stock with permanent adhesive that won t stick to gloves. May be applied at 32 F (0 C), holds in temperatures ranging from -75 F to 200 F (-60 C to 93 C). Holds on most surfaces including plastic and curved. Holds tightly to a wide variety of surfaces, won t stick to gloves. May be applied at 32 F (0 C), holds in temperatures ranging from -75 F to 200 F (-60 C to 93 C). Perfect for use in printers with serpentine feed. White smudge resistant surface stock, permanent adhesive won t stick to gloves. May be applied at 32 F (0 C), holds in temperatures ranging from -75 F to 200 F (-60 C to 93 C). Removable adhesive won t stick to gloves, may be removed leaving little or no residue. White smudge resistant surface stock. May be applied at 32 F (0 C), holds in temperatures ranging from -40 F to 200 F (-40 C to 93 C). Thermal Transfer Piggyback Bright white, smudge resistant material won t stick to gloves, holds tightly to most surfaces. May be applied at 32 F (0 C), holds in temperatures ranging from -75 F to 200 F (-60 C to 93 C). Thermal Transfer PolyFlex Piggyback Thermal Transfer Smudgeproof Kimdura Piggyback Durable, high performance material features a clear carrier sheet, offers excellent flexibility for demanding blood bag tracking applications. May be applied at 40 F (5 C), holds in temperatures ranging from -40 F to 302 F (-40 C to 150 C). This premium material features a smooth surface to provide a precisely legible imprint, stands up to moisture and chemicals, won t stick to gloves. May be applied at -20 F (-29 C), holds in temperatures ranging from -65 F to 200 F (-54 C to 93 C). Thermal Transfer Smudgeproof Kimdura Thermal Transfer Matte Cold-Stick An aggressive, permanent adhesive that won t stick to gloves, is solvent resistant. Its surface accepts a clear imprint that won t smear or flake. May be applied at 10 F (-12 C), holds in temperatures ranging from -65 F to 300 F (-54 C to 148 C). Glove free, permanent adhesive. May be applied at -10 F (-23 C), holds in temperatures ranging from -65 F to 200 F (-53 C to 93 C). Good initial adhesion that becomes permanent after 24 hours. BL-27

Specialty Ribbons for Thermal Transfer Printers Shamrock offers a variety of ribbon formulations to best serve your thermal transfer printer, the label stock being printed and the label's application. A selection of ribbons available from Shamrock is listed below. For information on ribbons in other sizes and those compatible with other printers, please call Shamrock at 800-323-0249. WAX-BASED RIBBONS Bar Coded Labels Patient Charge Labels Premium wax-based film, manufactured with strict quality control. Superior backcoating provides effective ribbon flow, reduces printhead wear and ensures high performance on a wide variety of facestocks. Zebra Compatible 984' or 300 meters/roll Compatible with: Zebra 90, 90Xi series, 105, 105Se, 105SL, 130, 140, 140Xi series, 143, 160s, 170, 170Xi series, 220, 220Xi series, S300, S400, S500. Catalog No. Width Width (mm) Rolls/ctn Ribbon-19 3.15" 80.0 6 Ribbon-118 4.0" 101.6 6 Ribbon-100 4.33" 110.0 6 Ribbon-90 4.5" 114.3 24 Zebra Compatible 1,476' or 450 meters/roll Ribbon-42 3.27" 83.0 6 Ribbon-122 4.17" 106.0 6 Ribbon-56 4.33" 110.6 12 DATAMAX Compatible 1,181' or 360 meters/roll Compatible with: Prodigy, Prodigy Plus, Prodigy Max, Allegro, Allegro2, DMX400/430, DMX600, DMX800, XL, Titan 6200, I-Class series, M-Class series and W-Class series. Ribbon-23 2.0" 50.8 6 Ribbon-88 3.0" 76.2 6 Ribbon-75 3.5" 89.0 24 Ribbon-36 4.0" 101.6 24 Ribbon-89 4.09" 104.0 24 SATO Compatible 1,345' or 410 meters/roll Compatible with: SATO M-4500 series, M-4600 series, M-8400, M-8400RV(E), M-8450, CL408(E), CL412(E) and CL612(E). Ribbon-7 2.25" 64.0 6 Ribbon-45 3.27" 83.0 6 Ribbon-116 4.33" 110.0 6 Intermec Compatible 509' or 155 meters/roll Compatible with: Intermec 3400, 3440, 3600 and 8646. Ribbon-44 4.09" 104.0 6 Also available with plastic core, call for more information. WAX/RESIN RIBBONS Bar Coded Labels Extended Use Labels Wax/resin formulation ribbons are an effective alternative to resin when matched with correct materials and applications. These ribbons provide superior durability when matched with paper facestocks and provide smudge resistance when matched with softer synthetics. Zebra Compatible 984' or 300 meters/roll Compatible with: Zebra 90, 90Xi series, 105, 105Se, 105SL, 130, 140, 140Xi series, 143, 160s, 170, 170Xi series, 220, 220Xi series, S300, S400, S500. Catalog No. Width Width (mm) Rolls/ctn Ribbon-58 2.36" 60.0 6 Ribbon-102 3.27" 83.0 6 Ribbon-97 4.33" 110.0 6 DATAMAX Compatible 1,181' or 360 meters/roll Compatible with: Prodigy, Prodigy Plus, Prodigy Max, Allegro, Allegro2, DMX400/430, DMX600, DMX800, XL, Titan 6200, I-Class series, M-Class series and W-Class series. Ribbon-12 3.0" 76.2 12 Ribbon-120 4.0" 101.6 6 RESIN RIBBONS Extreme Environments Asset Labels Resin ribbons are excellent for printing on polyester, vinyl and other synthetic materials. When matched with the proper facestocks, these ribbons provide superior smudge and smear resistance. Zebra Compatible 984' or 300 meters/roll Compatible with: Zebra 90, 90Xi series, 105, 105Se, 105SL, 130, 140, 140Xi series, 143, 160s, 170, 170Xi series, 220, 220Xi series, S300, S400, S500. Catalog No. Width Width (mm) Rolls/ctn Ribbon-115 2.0" 50.8 36 Ribbon-48 2.36" 60.0 12 Ribbon-53 3.27" 83.0 6 Ribbon-20 4.33" 110.0 6 Zebra Compatible 1,476' or 450 meters/roll Ribbon-30 1.57" 40.0 6 Ribbon-95 4.33" 110.0 6 DATAMAX Compatible 1,181' or 360 meters/roll Compatible with: Prodigy, Prodigy Plus, Prodigy Max, Allegro, Allegro2, DMX400/430, DMX600, DMX800, XL, Titan 6200, I-Class series, M-Class series and W-Class series. Ribbon-22 3.0" 76.2 6 Ribbon-51 4.0" 101.6 24 Eltron /Zebra Compatible 299' or 91 meters/roll Compatible with: TLP2242, TLP2642, TLP2742, TLP3642, TLP3742, Zebra-T400 and Zebra-T450. Ribbon-170 2.5" 63.5 48 Ribbon-107 3.29" 83.5 12 Ribbon-91 4.33" 110.0 6 Ribbons are available in additional sizes and for additional printers. Call Shamrock at 800-323-0249. THERMAL PRINTER CLEAN CARD Shamrock s CLEAN CARD is saturated with 99.9% isopropyl alcohol to clean your thermal printheads, guide paths and rollers. Regularly scheduled use of printer cleaning cards helps maintain your thermal printer's uninterrupted production of precisely printed labels. BL-28

Specialty Labels for Laser Printers Shamrock s top quality Laser Labels run trouble free through your laser printer. The stock labels listed below are supplied on 8 1 /2" x 11" sheets. Shamrock can customize any 8 1 /2" x 11" sheet to contain other label sizes or we can supply your laser labels in other sheet sizes. Specialty General Purpose Laser Labels GENERAL PURPOSE LASER LABELS Cat. No. Label Size Labels per Sheet MSL-100-FLAT MSL-175-FLAT MSL-275-FLAT LASER-1 LASER-2 LASER-3 LASER-4 LASER-5 LASER-6 LASER-7 LASER-8 LASER-9 LASER-10 LASER-11 LASER-12 LASER-13 LASER-14 LASER-15 LASER-20 LASER-21 LASER-22 LASER-100 LASER-100-PERF LASER-101 LASER-104 LASER-102 LASER-103 SPLS-103X 1" x 2" 1 3 4" x 2 3 4" 2 3 4" x 4 1 4" 1 2" x 2" 7 8" x 2 5 8" 1" x 2 1 8" 1" x 2 5 8" 1" x 4" 1 7 16" x 4" 2" x 4" 2" x 4 1 4" 2 1 2" x 4" 2 3 4" x 4 1 4" 3 1 3" x 4" 3 2 3" x 8 1 2" 5" x 4" 5 1 2" x 8 1 2" 11" x 8 1 2" 1 2" x 1" 1 2" x 1 1 4" 1 2" x 1 3 4" 1" x 2 5 8" 1" x 2 5 8" 1 2" x 2" 1 2" x 1 1 2" 1 1 2" x 2" 1 3 4" x 2 3 4" 1" x 2 1 2" 44 18 8 80 33 40 30 20 14 10 10 8 8 6 3 4 2 1 160 120 80 30 30 80 100 28 18 30 MSL-275-FLAT 2 3 /4" x 4 1 /4" LASER-20-2 1 /2" x 1" LASER-5-11 1" x 4" LASER-100-PERF 1" x 2 5 /8" LASER-14 5 1 /2" x 8 1 /2" LASER-21 1 /2" x 1 1 /4" Holes punched to allow easy inclusion in binders. Call for information on colors available. SPLS-103X 1" x 2 1 /2" COLORS FOR SHAMROCK S STANDARD LASER LABEL SHEETS To order Blank Laser Labels in color, please add the color number shown to the label s catalog number. For example: LASER-5 in orange would be ordered as LASER-5-5. 1 White 2 Yellow 3 Green 4 Red 5 Orange 6 Blue 7 Pink 11 Rose Shamrock single-ply and piggyback Labels for Laser Printing are available in additional stock sizes. Call 800-323-0249 for complete information. BL-29

Specialty Laser Labels for the Laboratory Shamrock s top quality labels run trouble free through your laser printer. Labels are supplied on 8 1 /2" x 11" sheets. Shamrock can customize any 8 1 /2" x 11" sheet to contain the exact size label you require. Call for complete information. LASER LABELS FOR MICROSCOPE SLIDES Specialty Blank Laser Labels are available in 8 standard colors. SLS-LASER-RC 15 /16" x 15 /16" SES-LASER-6 15 /32" x 15 /16" SLS-LASER 15 /16" x 15 /16" Please indicate color desired by placing the color number after the catalog number. Contact Shamrock if your color coding system calls for additional colors. Cat. No. Label Size Labels per Sheet 1 White SLS-LASER SLS-LASER-RC (round corners) SES-LASER (end labels) 15 16" x 15 16" 15 16" x 15 16" 15 32" x 15 16" 88 80 168 2 Yellow 3 Green LASER LABELS FOR USE IN UNIQUE CONDITIONS Smudge resistant, withstand cryogenic temperatures, extreme heat, harsh solvents and steam autoclaves. 4 Red 5 Orange 6 Blue 7 Pink 11 Rose LASER-KDS-5125 1 /2" x 1 1 /4" LASER-KDS-5125-5 1 /2" x 1 1 /4" LASER-KDS-5125-2 1 /2" x 1 1 /4" Cat. No. Label Size Labels per Sheet LASER-KDS-5125 1 2" x 1 1 4" 120 BL-30

Signature Counseling Yes [ ] No [ ] Signature Specialty Laser Labels for the Pharmacy UNIT DOSE LASER LABELS Specialty Unit Dose Labels are specifically designed to fit the blister cup, supplied in standard matte finish stock or in foil backed matte finish stock to provide a moisture barrier. Perforations between labels allow easy dispensing. Die cut backing prevents medication contact with the label s adhesive. Red Dot portion lifts label easily off blister cup when dispensing medication. UD-LASER-F-6118 (8 1 2" x 11" sheet, foil backed) UD-LASER-6116 (8 1 2" x 11" sheet) 2" x 2 3 4" 2" x 2 3 4" 2" x 3" 2" x 3" SPECIALTY LASER LABEL FORMS Shamrock s top quality, pressure-sensitive label stock in sheeted formats runs trouble free through your laser printer. 1 3 8" x 2 3 4" 1 2" x 2 3 4" 1 2" x 2 3 4" 1 7 8" x 2 3 4" 1 2" x 2 3 4" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 3 8" x 3" 1 2" x 3" 1 2" x 3" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 2" x 1 1 2" 1 3 8" x 3" 1 2" x 3" 1 2" x 3" 2 5 8" x 2 3 4" 2 5 8" x 2 3 4" 2 5 8" x 3" 2 3 8" x 3" LASCL-10-2 4" x 7 1 2" LASCL-12 4" x 7 1 2" LASCL-13 4" x 8 1 2" Specialty Outpatient Laser Label/Bond Paper Forms LASCL-17 4" x 8 1 2" Shamrock forms, featuring a combination of pressure-sensitive labels and bond paper, are designed to run trouble free through your laser printer. Stock forms are available blank or with areas tinted in up to three colors. If you don t see the configuration that you need among the forms illustrated, Shamrock can produce a custom layout designed to fit your specific needs. 3 8" x 1 1 2" 2" x 3 1 8" 3 8" x 5 8" 1 3 8" x 2 5 8" 1 2" x 2 1 8" 5 8" x 2 5 8" 3 4" x 2 5 8" 7 16" x 1 13 16" Signature Log 21 32" x 3 1 4" 21 32" x 3 1 4" 1 27 32" x 2 7 8" 13 16" x 2 17 32" 13 16" x 2 17 32" Hard Copy Prescription Drug Utilization Review 9 32" x 2 7 8" 3" x 4 1 4" 3" x 4 1 4" 7 16" x 1 13 16" 1 27 32" x 2 7 8" 9 32" x 2 7 8" Signature Log 21 32" x 3 1 4" 21 32" x 3 1 4" 13 16" x 2 17 32" 13 16" x 2 17 32" 1 2" x 1 9 16" 1 5 8" x 3 9 16" 2" x 3 1 4" 3 8" x 3 9 16" 2" x 3 1 4" 2" x 3 1 4" 2" x 2" PATIENT COUNSELING Patient Consultation Message 5 3 4" x 8 1 2" 2 1 4" x 5 1 2" 2 3 4" x 4 1 4" 2 3 4" x 4 1 4" 6 5 16" x 8 1 2" PHARMACY RECEIPT Insurance or Tax Record Rx Receipt Rx Receipt Receipt Receipt 2 1 2" x 5 1 2" 2 3 8" x 4 1 4" 2 3 8" x 4 1 4" 2 3 8" x 4 1 4" 2 3 8" x 4 1 4" LASTW-S10 5 1 2" x 8 1 2" LASTW-S13 8 1 2" x 11" LASTW-S13-3 8 1 2" x 11" LASTW-S15 8 1 2" x 11" BL-31

Specialty Outpatient Laser Label/Bond Paper Forms 3 8" x 1 1 2" 1 7 8" x 3 1 8" 1 7 8" x 3 3 4" 13 16" x 3 1 13 8" 16" x 1 1 2" 13 16" x 3 3 4" 7 16" x 1 1 2" 2" x 3" 3 8" x 1 1 2" 3 8" x 1 1 2" 7 8" x 3 3 4" 3 4" x 3 3 4" 3 4" x 3 3 4" 2" x 3" 1 1 4" x 3" 3 4" x 2 3 4" 3 4" x 2 1 6" 3 8" x 1 1 2" 3 4" x 2 3 4" 3 4" x 2 1 6" 2 5" x 1 9 16" 2" x 2 15 16" 1 1 2" x 3 7 8" 1 2" x 3 7 8" 2" x 4 1 4" 2 3 16" x 4 1 4" 2 3 16" x 4 1 4" 1 15 16" x 4 1 4" 1 15 16" x 4 1 4" 1 29 32" x 4 1 4" 1 29 32" x 4 1 4" 4" x 4 1 4" 2" x 4 1 4" 3" x 8 1 2" 1 7 8" x 4 1 4" 1 7 8" x 4 1 4" 5 3 8" x 8 1 2" 6 5 32" x 8 1 2" 2 7 8" x 8 1 2" 1 13 16" x 4 1 4" 1 13 16" x 4 1 4" LASTW-S16 8 1 2" x 11" LASTW-S23 8 1 2" x 11" LASTW-S24 8 1 2" x 11" LASTW-S28 8 1 2" x 11" 3 8" x 1 5 8" 2 1 32" x 3 3 16" 29 32" x 1 5 8" 1 17 32" x 2 29 32" 1 2" x 2 29 32" 1 2" x 1 5 8" 2" x 3" 2" x 3" 7 16" x 1 5 8" 2 1 16" x 2 3 4" 1 1 2" x 3 1 2" 13 32" x 1 9 16" 9 16" x 3 1 2" 1 5 8" x 7 16" 2" x 3 1 32" 11 16" x 3 1 32" 11 16" x 2 3 16" 2" x 3 5 32" 11 16" x 3 5 32" 1 2" x 2 13 16" 1 2" x 4 1 2" 2 5 16" x 3 1 2" 2 5 16" x 5" 4 29 32" x 5 3 32" 6 5 32" x 8 1 2" 3 29 32" x 2 5 8" 7 19 32" x 3 13 32" 7 29 32" x 5 7 8" 8 1 8" x 8 1 2" 2 11 16" x 5 3 32" 2" x 4 1 4" 2" x 4 1 4" 4" x 2 5 8" LASTW-S33 8 1 2" x 11" LASTW-S35 8 1 2" x 11" LASTW-S37-2 8 1 2" x 11" LASTW-S30-3 8 1 2" x 13" 1 5 8" x 7 16" 2" x 3 5 32" 2" x 3 1 32" 11 16" x 3 1 32" 11 16" x 2 3 16" 11 16" x 3 5 32" 2 1 32" x 3 11 64" 3 4" x 3 11 64" 25 64" x 1 37 64" 1 5 8" x 3 5 8" 25 64" x 1" 25 64" x 2 5 8" 3 4" x 3 5 8" 25 64" x 1 37 64" 1 5 8" x 3 5 8" 2 1 32" x 3 11 64" 25 64" x 1" 25 64" x 2 5 8" SIGNATURE LOG 3 3 4" x 3 11 64" 3 4" x 1 41 64" 4" x 3 9 16" 1 2" x 1 9 16" 2" x 3" 11 16" x 4 9 16" 2 11 16" x 3 13 16" 1 7 8" x 4 1 4" 1 7 8" x 4 1 4" 3 4" x 1 37 64" 2 1 4" x 5 3 16" 2 1 4" x 3 5 16" 2 3 16" x 5 1 4" 2 3 16" x 3 1 4" 2 1 16" x 4 3 8" 2 1 16" x 4 1 8" 6 1 16" x 8 1 2" 3" x 5 3 16" 3" x 3 5 16" 3" x 5 1 4" 3" x 3 1 4" 5 5 8" x 8 1 2" 2 1 4" x 4 1 4" 2 1 4" x 4 1 4" 2 5 16" x 4 1 4" 2 5 16" x 4 1 4" LASTW-S37-3 8 1 2" x 11" LASTW-S39 8 1 2" x 11" LASTW-S39-4 8 1 2" x 11" LASTW-S40 8 1 2" x 11" BL-32

. 7 16" x 1 19 32" 3 1 32" x 3 5 8" 2 5 32" x 3 5 32" 19 32" x 1 19 32" 20 32" x 1 19 32" 7 8" x 3 5 32" 7 8" x 1 19 32" 25 64" x 1 9 16" 2" x 3 3 16" 13 16" x 2 9 16" 5 16" x 2 3 16" 1 2" x 2 3 16" 1 1 16" x 3 5 8" 3 8" x 3 5 8" 1 3 8" x 3 5 8" 25 64" x 1 9 16" 2" x 3 3 16" 13 16" x 2 9 16" 1 2" x 2 3 16" 1 1 16" x 3 5 8" 3 8" x 3 5 8" 5 16" x 2 3 16" 1 3 8" x 3 5 8" 25 64" x 1 9 16" 2" x 3 3 16" 13 16" x 2 9 16" 1 2" x 2 3 16" 1 1 16" x 3 5 8" 3 8" x 3 5 8" 5 16" x 2 3 16" 1 3 8" x 3 5 8" 1 27 32" x 4 1 4" 1 27 32" x 4 1 4" 5 15 16" x 8 1 2" 3 5 8" x 8 1 2" 9" x 8 1 2" 9 1 32" x 8 1 2" 1 15 16" x 4 1 2" 1 15 16" x 4" LASTW-S42 8 1 2" x 11" 1 19 32" x 4 1 4" 1 19 32" x 4 1 4" LASTW-S43 8 1 2" x 11" 1 1 2" x 8 1 2" 1 1 2" x 4 1 4" 1 1 2" x 4 1 4" LASTW-S43-2 8 1 2" x 14" LASTW-S43-3 8 1 2" x 14" 1 55 64" x 3" 3 8" x 1 1 2" 3 8" x 1 19 32" 2 15 64" x 3 5 8" 1 55 64" x 3" 3 8" x 1 1 2" 3 8" x 1 19 32" 2 15 64" x 3 5 8" 2 5" x 1 9 16" 2" x 3 3 16" 2" x 3 7 16" PHARMACY LOG 1 9 16" x 3 8" 2" x 3 1 8" 7 16" x 2 7 32" 7 16" x 2 29 32" 19 32" x 2 29 32" 31 32" x 2 29 32" 1 9 16" x 11 32" 15 16" x 2 27 64" 15 16" x 2 11 64" 15 16" x 3 5 8" 15 16" x 2 27 64" 15 16" x 2 11 64" 15 16" x 3 5 8" 7 8" x 3 3 16" 7 8" x 1 9 16" 7 8" x 3 7 16" 1 1 16" x 3 1 8" 1 1 16" x 2 7 32" 1 1 16" x 2 29 32" 1 9 16" x 4 1 4" 1 9 16" x 4 1 4" 1 35 64" x 4 1 4" RECEIPT 1 35 64" x 4 1 4" DUPLICATE 1 7 8" x 4 1 4" RECEIPT 1 7 8" x 4 1 4" 2 15 16" x 4 1 4" 2 15 16" x 4 1 4" 8 15 16" x 8 1 2" 5 3 4" x 8 1 2" PATIENT PRESCRIPTION INFORMATION 4 1 4" x 8 1 2" LASTW-S46-1 8 1 2" x 11" LASTW-S48 8 1 2" x 11" LASTW-S53 8 1 2" x 11" LASTW-S46-14 8 1 2" x 14" 1 13 16" x 2 23 32" 29 32" x 2 3 4" 13 32" x 1 21 32" 29 32" x 2 3 4" 1 13 16" x 7 8" 2" x 3" 2" x 3 1 16" 3 8" x 1 9 16" 1" x 2 5 16" 5 8" x 2 5 16" 3 8" x 2 5 16" 3 8" x 2 1 8" 2 7 8" x 1 15 16" 2 7 8" x 1 1 2" 2 7 8" x 1 3 8" 2 7 8" x 1 2" 2 7 8" x 1" 2" x 1 2" 2" x 2 3 4" 1" x 4 3 16" 2" x 7 16" 1" x 4 3 16" 2" x 4 3 16" 1 7 16" x 4 7 16" 1 7 16" x 4 1 16" 1 2" x 1 5 8" 1 13 16" x 4 7 16" 1 13 16" x 4 1 16" 8" x 5 7 8" 4" x 2 5 8" 3 8" x 1 5 8" 7 11 16" x 8 1 2" 7 5 8" x 4 1 4" 7 5 8" x 4 1 4" 5 3 8" x 8 1 2" 4" x 2 5 8" LASTW-S58 8 1 2" x 11" LASTW-S62-1 8 1 2" x 11" LASTW-S68 8 1 2" x 11" LASTW-S76 8 1 2" x 11" BL-33

Specialty Laser Labels for Patient Charge PIGGYBACK LASER LABELS Shamrock offers patient charge labels in 8 1 2" x 11" sheets for laser printing. Labels feature piggyback construction and may be tinted any of the eight standard colors listed below. MSL-4FLAT-PB-2 (Yellow) 5 6" x 1.7" (carrier size 1" x 2") MSL-4MT-PB-5 ( Orange) 7 8" x 2" (carrier size 1" x 2 1 8") MSL-4FPB-TAB-11 (Rose) 7 8" x 1 11 16" (carrier size 1" x 2") SINGLE-PLY LASER LABELS Shamrock also offers non-piggyback labels in a wide range of sizes, supplied on 8 1 2" x 11" sheets. Single-ply labels may be ordered in any of the eight standard colors listed below. Call 800-323-0249 for complete information. LASER-100 1" x 2 5 /8" LASER-100-PERF 1" x 2 5 /8" MSL-100-FLAT (4-up) 1" x 2" MSL-175-FLAT (3-up) 1 3 4" x 2 3 4" MSL-275-FLAT (2-up) 2 3 4" x 4 1 4" 8 STANDARD COLORS 1 White 2 Yellow 3 Green 4 Red 5 Orange 6 Blue 7 Pink 11 Rose BL-34

Specialty Labels for Dot Matrix Printers Shamrock Pinfed Labels will not jam your dot matrix printer, accept a clear imprint, stick tightly to most surfaces and adapt to a variety of labeling needs. Specialty General Purpose Pinfed Labels BLANK LABELS -- ONE WIDE Cat. No. Size Perf Every SNO-12 SNO-13 SNO-14 SNO-15 SNO-17 SNO-105 SNO-559 SNO-110 SNO-31 SNO-32 SNO-700 SNO-33 SNO-34 SNO-35 SNO-37 SNO-42 SNO-43 7 /16" x 2 3 /4" 7 /16" x 3 1 /2" 7 /16" x 4" 7 /16" x 5" 7 /16" x 7 3 /4" 3 /4" x 3" 3 /4" x 4 1 /2" 15 /16" x 2" 15 /16" x 2 1 /2" 15 /16" x 2 3 /4" 15 /16" x 3" 15 /16" x 3 1 /2" 15 /16" x 4" 15 /16" x 5" 15 /16" x 7 3 /4" 1 7 /16" x 2 3 /4" 1 7 /16" x 3 1 /2" 6" 6" 6" 6" 6" 1" 1 3 /16" 1" 1" 1" 1" 1" 1" 1" 1" 1 1 /2" 1 1 /2" Cat. No. Size Perf Every SNO-44 SNO-44-R SNO-45 SNO-701 SNO-420 SNO-52 SNO-153 SNO-53 SNO-54 SNO-55 SNO-373 SNO-64 SNO-175 SNO-60 SNO-65 SNO-465 SNO-193 1 7 /16" x 4" 1 7 /16" x 4" 1 7 /16" x 5" 1 1 /2" x 3" 1 11 /16" x 3" 1 15 /16" x 2 3 /4" 1 15 /16" x 3" 1 15 /16" x 3 1 /2" 1 15 /16" x 4" 1 15 /16" x 5" 2 7 /16" x 3" 2 7 /16" x 4" 2 7 /16" x 4 5 /8" 2 15 /16" x 4" 2 15 /16" x 5" 3 1 /4" x 1 15 /16" 3 15 /16" x 6" 1 1 /2" 1 1 /2" 1 1 /2" 1 3 /4" 1 3 /4" 2" 2" 2" 2" 2" 2 1 /2" 2 1 /2" 2 1 /2" 3" 3" 3 1 /2" 4" BLANK LABELS -- TWO WIDE BLANK LABELS -- THREE WIDE BLANK LABELS -- FOUR WIDE BLANK LABELS -- FIVE WIDE SNO-13FF-2 FILE FOLDER LABELS Cat. No. Size Perf Every SNO-13FF 5 /8" x 3 1 /2" 6" Available in white, yellow, green, red, orange, blue, pink, violet, brown and black. Cat. No. Size Perf Every TWO WIDE SNO-443 SNO-33-2 SNO-34-2 SNO-335 SNO-44-2 SNO-305 THREE WIDE SNO-13-3 SNO-505 SNO-256 SNO-31-3 SNO-33-3 SNO-34-3 SNO-43-3 SNO-44-3 SNO-54-3 FOUR WIDE SNO-138 SNO-12-4 SNO-31-4 SNO-32-4 SNO-329-4 SNO-330-4 SNO-332-4 SNO-333-4 SNO-33-4 FIVE WIDE SNO-137 SNO-101-5 SNO-229 SNO-31-5 15 /16" x 15 /16" 15 /16" x 3 1 /2" 15 /16" x 4" 1 7 /16" x 3" 1 7 /16" x 4" 1 15 /16" x 3" 7 /16" x 3 1 /2" 15 /16" x 15 /16" 15 /16" x 2" 15 /16" x 2 1 /2" 15 /16" x 3 1 /2" 15 /16" x 4" 1 7 /16" x 3 1 /2" 1 7 /16" x 4" 1 15 /16" x 4" 7 /16" x 1 3 /4" 7 /16" x 2 3 /4" 15 /16" x 2 1 /2" 15 /16" x 2 3 /4" 15 /16" x 2 9 /10" 15 /16" x 3" 15 /16" x 3 1 /5" 15 /16" x 3 3 /10" 15 /16" x 3 1 /2" 7 /16" x 1 1 /2" 7 /16" x 1" 15 /16" x 1 1 /2" 15 /16" x 2 1 /2" 1" 6" 6" 1 1 /2" 6" 2" 6" 1" 1" 1" 6" 6" 6" 6" 6" 1 /2" 6" 6" 6" 6" 6" 6" 6" 6" 1 /2" 1 /2" 1" 1" BL-35

Specialty General Purpose Pinfed Labels BDP-1 15 /16" x 15 /16" BDP-2 7 /16" x 1" BDP-3 1 /4" x 1" BDP-5 15 /16" x 15 /16" SNO-64 2 7 /16" x 4" (White) SNO-64-F 2 7 /16" x 4" (White Flexible) SNO-64-2 2 7 /16" x 4" (Yellow) SNO-64-2-F 2 7 /16" x 4" (Yellow Flexible) SNO-60 2 15 /16" x 4" (White) SNO-60-F 2 15 /16" x 4" (White Flexible) SNO-60-2 2 15 /16" x 4" (Yellow) SNO-60-2-F 2 15 /16" x 4" (Yellow Flexible) Specialty Pinfed Mailing Labels Pinfed Labels may be ordered blank or imprinted as illustrated. To: Your Imprint Here 123 Your Street City, State Zip From: Labels are backed with permanent, pressuresensitive adhesive to stick instantly and hold tightly to any package surface. ML-19PF 2 7 /16" x 4" ML-20PF 2 15 /16" x 5" To: ML-21PF 2 7 /16" x 4" ML-22PF 2 15 /16" x 5" BL-36

Specialty Pinfed Labels for Laboratory Software 1 15 /16" x 3" 31 /32" x 2 1 /4" Stock labels are white. Color may be added to your specifications. BDP-10 1 15 /16" x 7 1 /2" 15/16" x 3" 15 /16" x 1" BDP-278 15 /16" x 6 5 /16" 15 /16" x 3 25 /32" 15 /16" x 1 13 /32" BDP-500 15 /16" x 8" 7 /8" x 2" 23 /32" x 4" BDP-561 1 7 /16" x 3 1 /2" BDP-141 1 7 /16" x 4" 1 1 /16" x 2 3 /4" 1 7 /8" x 2 3 /4" 1 7 /8" x 2 7 /16" 11 /16" x 2 3 /4" BDP-337 1 7 /8" x 8 1 /16" 1 7 /8" x 2 11 /16" 1 /2" x 2 11 /16" 2" x 3" 2 7 /8" x 2 13 /16" BDP-165 2 3 /8" x 5 3 /8" 9 /16" x 1 11 /16" 9 /16" x 1 5 /16" BDP-302 2 7 /8" x 5 15 /16" BL-37

Specialty Pinfed Labels for Laboratory Software 1 11 /16" x 3" 27 /32" x 2 5 /8" 5 /16" x 3" 3 /8" x 3" 5 /16" x 3" 2 1 /2" x 4" 1 /2" x 2 19 /32" 5 /8" x 1" 1 /2" x 2 19 /32" 3 /4" x 3" BDP-501 3 3 /4" x 6 13 /16" 15 /16" x 3 1 /4" BDP-383 5 15 /16" x 3" 3" x 5" 5 /8" x 13 /16" 2 15 /16" x 5" BDP-518 5 15 /16" x 5" BDP-504 8" x 6 9 /16" BDP-T-20 (TERRANO) 15 /16" x 2 1 /2" 1 9 /32" x 2 3 /4" 41 /64" x 1" BDP-DH-120 (DYNAMIC HEALTHCARE) 1 19 /32" x 7 3 /16" 11 /16" x 1" BDP-CHC-30 (CHC) 1 1 /16" x 1 11 /16" 1 1 /2" x 2 13 /32" 13 /16" x 1" 1 1 /2" x 1" BDP-CHC-31 (CHC) 1 1 /2" x 6 13 /16" BL-38

1 5 /16" x 3 3 /8" 21 " 23 32 x 32 " 21 32 " x 11 16 " 7 /8" x 7 /8" Stock labels are white. Color may be added to your specifications. BDP-CHC-32 (CHC) 1 5 /16" x 5 1 /2" 13 /16" x 1 9 /16" BDP-S-40 (SUNQUEST) 13 /16" x 7" 13 /32" x 1 1 /16" 13 " 3 32 x 1 32 " 13 /16" x 1 9 /16" 13 /16" x 1 9 /16" 13 " 3 32 x 1 32 " 13 /16" x 1 11 /16" 1 7 /16" x 3" 9 /16" x 7 /8" BDP-CHC-33 (CHC) 1 7 /16" x 3 7 /8" 13 /32" x 1 /16" 13 /16" x 1 9 /16" BDP-S-41 (SUNQUEST) 13 /16" x 2 5 /8" 3 /4" x 3 /4" BDP-S-725 (SUNQUEST) 13 /16" x 2 5 /8" 1 15 /16" x 3 3 /4" 3 /4" x 3 /4" 1 15 /16" x 3 3 /4" 1 1 /2" x 3 3 /4" 1 1 /2" x 3 3 /4" 7 /8" x 2 1 /2" BDP-S-267 (SUNQUEST) 3 7 /16" x 8" BDP-S-502 (SUNQUEST) 5 3 /8" x 8" 3 4 " x 3 4 " BDP-S-44-L 5" x 12" overall (VAC label stock/24 lb. Ledger Stock) 3 /4" x 2 27 /32" 3 /4" x 1 11 /32" 3 /4" x 1 5 /16" 9 /16" x 2 27 /32" 9 /16" x 1 11 /32" 9 /16" x 1 5 /16" BDP-M-50 (MUMPS) 15 /16" x 3 1 /2" BDP-M-51 (MUMPS) 1 5 /16" x 8 3 /16" BL-39