Backup in a Virtual Environment with Tandberg Data using RDX QuikStation and Tape Automation Virtual environments are growing in the SMB market. Virtualization enables computers to run multiple operating systems and applications making your infrastructure simpler, more efficient and cost effective. The role of backup and disaster recovery gets more important as physical servers and storage are consolidated. Tandberg Data and Veeam have partnered to provide you with a turnkey backup solution for virtual environments based on Tandberg Data s solutions and Veeam Backup & Replication software. Tandberg Data Storage Solutions RDX QuikStation and Tape Automation The RDX QuikStation is a removable disk-based storage system that combines the advantages of RDX removable disk technology with iscsi network connectivity and storage automation in one product. With its iscsi interface, the RDX QuikStation removable disk array integrates seamlessly into virtualized environments and is a more flexible alternative to existing backup devices. Tandberg Data s broad range of tape automation products fit perfectly into disaster recovery strategies. Whether your environment is a small business that would benefit by deploying the 1U 8-slot LTO- Autoloader or the 2U StorageLibrary T24 with 12 or 24 slots, or yours is a midsize or larger organization that could benefit from the robust StorageLibrary T40+ which scales from 24 to 188 slots, Tandberg Data s range of tape automation solutions integrates into every environment. Veeam Backup & Replication THE #1 BACKUP SOFTWARE FOR VMWARE AND HYPER-V Veeam Backup & Replication offers fast and reliable Backup and Restore of VMware vsphere and Mircrosoft Hyper-V Servers and Data. Backup and Replication are consolidated in one product. Veeam Backup & Replication sets the new standard for Backup and Recovery by leveraging the advantages of virtualization with Veeam vpower-technology. The RDX QuikStation Removable Disk Array is the Swiss Army Knife of Data Protection. The StorageLibraryT24 is fast, reliable and flexible. www.tandbergdata.com
Configurations RDX QuikStation To use BizNAS as a Backup Repository, it must be introduced to Veeam Backup & Replication as a Unix Server. Use the web interface to configure the RDX QuikStation and select the operation mode. F or backup to removable disk choose RDX Drive (8 RDX drive targets). For security reasons, activation of CHAP authentication is recommended with iscsi connections. Click on all 8 RDX drives and enter username and password in the security section. p.2 www.tandbergdata.com
BACKUP REPOSITORY FOR BizNAS Veeam Backup & Replication Server or Veeam Repository Server can connect to the 8 RDX bays in the RDX QuikStation via the Microsoft iscsi Initiator. Begin by starting the Microsoft iscsi Initiator. Enter the IP Address of your QuikStation as the target and click on Quick Connect. All 8 RDX bays of the RDX QuikStation will appear. To connect, click Connect. Choose Advanced and check the Enable CHAP log on box. Type in a CHAP-password in Target secret field. Windows Disk Manager will display the status of all RDX QuikStation bay upon insertion of an RDX cartridge into any RDX bay. For the best possible results, all 8 bays should contain an RDX cartridge. Then assign a drive letter to each bay via the Windows Disk Manager. p.3 www.tandbergdata.com
Veeam Initial Setup The verification option will need to be disabled to prevent Veeam from verifying each backup run. This will avoid a possible error condition if a media rotation scheme is used with the RDX QuikStation. To disable the verification option to enable media job rotation, modify the following value (see screen on the left) in the Registry for Veeam Backup and Replication. For each Bay/Media in the QuikStation, a repository will be created which can be selected as a target for backup jobs. Choose type of backup repository. Choose backup server. p.4 www.tandbergdata.com
BACKUP Job Settings Choose path of the repository where backup should be stored. Choose a name for the backup job. Choose the virtual machines to backup. p.5 www.tandbergdata.com
Choose the backup repository created earlier. Restore and Activation The RDX QuikStation drives are recognized by Veeam as Removable Disk Devices which enable selection of a retention policy that specifies the number of restore points Veeam will retain on the RDX disk. In the example above, the most recent 14 restore points will be retained on the RDX cartridge and Veeam will indicate the total number of restore points that are available on the existing cartridge. When a new RDX cartridge is introduced, Veeam will indicate zero available restore points and initiate a new backup operation. Activation of the Reverse Incremental backup method in advanced job settings is recommended. When Reverse Incremental is enabled and the RDX cartridge contains a previously-written backup, Veeam will automatically create another full backup to the RDX cartridge without it affecting previous backups. To overwrite or delete a previously-written backup (i.e., to make room for the next full backup), a manual deletion of backup jobs is required. To manually delete previous backup jobs, utilize the batch script shown on the left. This process can be automated to run at the beginning of every backup job by entering this script as a Pre-Backup-Script in advanced job settings. Another useful script is the postbackup media eject operation available for free The post-backup media eject script performs an automated cartridge eject upon job completion which is very useful for implementing a media rotation scheme for disaster recovery and off-site storage p.6 www.tandbergdata.com
Configurations for Backup to Tape with Tandberg Data Tape Automation BACKUP REPOSITORY FOR RDX In our example, there is a tape library attached with two LTO drives. A media pool was created with two tape cartridges (see steps below). The corresponding library and tape drive drivers have been installed. Media Pool Veeam automatically detects the attached tape libraries. To write backups to tape, you have to define media pools which contains all or a selected number of tapes in the library. Define name and description of the media pool. Choose a number of tapes. p.7 www.tandbergdata.com
Define a media set BACKUP JOB Choose a name and description for this backup to tape job. Choose the files (source) to be backed up. p.8 www.tandbergdata.com
Choose the media pool created in the steps above. A FINAL RECOMMENDATION A final recommendation: store a replica of the Veeam Backup Server on an RDX cartridge in the QuikStation or in an off-site location. This replica of the Veeam Backup Server can be mounted directly from an RDX cartridge accessible via iscsi to your ESX host which will enable the start of a restore operation within a few seconds and provide immediate access to your business-critical data and systems. About Tandberg Data Tandberg Data is a wholly owned subsidiary of Overland Storage, Inc. and a leading global supplier of data protection solutions for small and medium-sized businesses. The company s wide range of costeffective storage products and services provides customers with best-in-class tape, disk, removable disk and software solutions for backup, archiving and disaster recovery. These solutions are marketed through a global channel of qualified resellers, distributors and major server OEMs. An extensive service and support network supports all Tandberg Data products worldwide. IB-Veeam_QStation_Autom_EN_2014A Tandberg Tandberg Data Data ASA GmbH Økernveien Feldstrasse 94 81 N-0579 44141 Dortmund Oslo Norway Germany Tel: Tel: +47 +49 (0) (0) 2218 231 5436 9090-0 Fax: Fax: +47 +49 (0) (0) 2218 231 5436 9550-111 00 800 8263 2374 (00 800 TANDBERG) salesemea@tandbergdata.com www.tandbergdata.com/emea Tandberg Data Corporation Tandberg Data Corporation 2108 55th Street 10225 Westmoor Dr., Ste. 125 Boulder, CO 80301 Westminster, CO 80021 USA USA Tel: 303.442.4333 Tel: 303.442.4333 Fax: 303.417.7170 Fax: 303.417.7170 Toll Free: (800) 392-2983 sales@tandbergdata.com www.tandbergdata.com/us Tandberg Data (Asia) Pte Ltd 8 Cross Street, #28-00 PWC Building Singapore 048424 Tel: (65) 6850 7820 Fax: (65) 6850 7889 salesapac@tandbergdata.com www.tandbergdata.com/apac Tandberg Data (Japan) Inc. Dai 6 Ito Building 5F, 4-4-7 Ebisu, Shibuya-ku, Tokyo, 150-0013 Tel: +81 3 5475 2140 Fax: +81 3 5475 2144 TDJ_sales@tandbergdata.com www.tandberg.co.jp Specifications subject to change without notice. AccuGuard, AccuVault, BizNAS, QuikStation, QuikStor, RDX, SecureService, StorageLibrary, Storageloader, Tandberg Data and the Tandberg Data Logo are trademarks or registered trademarks of Tandberg Data. LTO is a trademark of HP, IBM and Quantum. All other trademarks are property of their respective owners. p.7 2014 TANDBERG www.tandbergdata.com DATA. All rights reserved. D2D2Tpaper0802