High capacity drilling mud solids control equipment manufacturer- http://www.china-kosun.com/ Requirements for drilling mud agitator specifications Mud agitator combines compact design with high torque performance levels necessary for a uniformly suspended flow of drilled solids throughout the mud systems. The specification of mud agitator: 1.low profile design to allow for positioning mud conditioning equipment over mud tanks. 2.Maximum height above tank is 16 inch. 3.Light weighted, but sturdy construction with the highest torque rating in the industry. Example 15 hp PIT VIPER weighs 542 lbs (246.4 kg ) compared to industry average of 1830 lbs (831.8 kg ) for competitive units. 4.Available in 3,5,7 1/2, 10, 15, 20, 25 and 30 hp models. 5.Oversized shaft bearings are used for longer gearbox life and lower maintenance requirements. 6.Cast iron housings are one-piece, reinforced and ribbed for exra strengh.
High capacity drilling mud solids control equipment manufacturer- http://www.china-kosun.com/ 7.Detachable impeller shaft for ease of servicing without disassembling unit. 8.Simple mounting.agitator base rests on tanks structural cross beams held by six bolts. 9.Electric motors : Class 1,Group D.Class 11, Groups F&Gexplosion-proof electric motors are available in 50 or 60 Hz. 10.All internal shafts are heated treated and ground for high loading capacity.no grease fittings. 11.All internal TMLL bearing run in oil.