ADSL / VDSL Low Pass Filter LCR Modules Product Information PI-XDSL_ 8/6
Introduction Introduction The market of the telecommunication is dominated by the XDSL technology (Digital Subscriber Line). Under the different XDSL variations the ADSL/VDSL gets an outstanding part. ADSL with its asymmetric performance, a high download rate and a small upload rate optimized for Internet use, needs its special hardware on the CO (Central Office) and CPE (Customer Premised Equipment) side. ADSL linecards installed by the provider at the central relay facilities and an ADSL modem for the subscriber require a POTS- (Plain Old Telephone Service, analogue telephone) or ISDN-Splitter to separate the telephone and ADSL signals, which are transmitted along one cable. Inductive components are used in ADSL for various applications. VDSL is the reasonable further development of the XDSL technology, driven by extremely high downloads up to 5Mb/s for several applications, like TV. Especially HDTV with its high data rates VDSL gives a possibility to manage all these demands in one technical solution for a high reachability of the customers. VAC s current product spectrum for the ADSL/VDSL system fulfils the market demands and the customers needs. Besides the established filter components, splitters CPE and splittercards CO for ADSL/VDSL, VAC also produces for ADSL/VDSL the new low pass filter LCR modules. Besides the LCR Modules designed according the international ITU-T and ETSI ATA standards, VAC also develops customized LCR modules with additional requirements. Development work is based on a close cooperation between the customer and VAC and on the specifications of the customer. Afterwards the modules are manufactured by VAC in process and cost optimized plants. Our in-depth knowledge of the application fields and technical requirements puts us in a position to find the ideal solution and turns this into an innovative product. The VAC ADSL/VDSL LCR modules are developed with a maximum reduction of PCB space, including all components for a splitter and no need for additional capacitors or resistors. They were all delivered with a fully tested filter performance. The advantages of using VAC ADSL/VDSL LCR modules including all inductors, capacitors and resistors are: - simple PCB layout (2 pins for Line in and 2 pins for Line out) - very compact designs for increasing the line density - cost optimized designs and production - fully RoHS compliant - completely tested filter with excellent insertion loss, return loss and attenuation. characteristics - designed according to the international ITU-T and ETSI ATA standards page Product Information PI-XDSL_ 8/6
Cross-Reference-List ADSL/VDSL LCR Modules ADSL/VDSL low pass filter LCR modules of following applications are available. Technical details on request. Designed according to: ITU-T G992. Annex B (ISDN) + E3 ETSI TS 952--3 casing typ. upright flat flat - 4B3T (5Ω) - 2BQ (35Ω) 58-** 555-8** 552-45** ETSI TS 952- Combi (ISDN/POTS) casing typ. upright flat flat - 4B3T (5Ω) + (22 Ω + (82 Ω // 5 nf)) - 2BQ (35Ω) + (22 Ω + (82 Ω // 5 nf)) - 4B3T (5Ω) + (27 Ω + (75 Ω // 5 nf)) - 2BQ (35Ω) + (27 Ω + (75 Ω // 5 nf)) 58-** 555-8** 552-45** Other Combi (ISDN/POTS) casing typ. upright flat Flat - 2BQ (35Ω) + (6Ω) 58-** 555-8** 552-45** ITU-T G992. Annex A (POTS) + E - 6Ω, real without BT casing typ. upright flat flat K2486* / + 58-83** / 58-53 K2467* 552-46* ETSI ATA TS 952 - - (POTS) casing typ. upright flat flat - option (A) 27 Ω + (75 Ω // 5 nf) + 6 Ω 58-8** / 58-5** - - - option (B) 27 Ω + (75 Ω // 5 nf) 58-82** / 58-52** - - * ADSL, ADSL2+, VDSL ** ADSL, ADSL2+, VDSL2 + under development - Other filter characteristics are available on request - Europe VACUUMSCHMELZE GMBH & Co. KG P.O. Box 2253 D342 Hanau, Germany Tel. +49 68 38- Fax +49 68 3878 America VAC Magnetics Corporation Magnet Drive Elizabethtown, KY 427 Tel.: ++ 27/769-3 33 Fax: ++ 27/765-3 8 Asia/Pacific VACUUMSCHMELZE Singapore Pte Ltd 3 Beach Road, #3-3 The Concourse Singapore 99555 Tel. +65 392 6 Fax +65 392 6 page 2 Product Information PI-XDSL_ 8/6
ADSL/VDSL Low Pass Filter LCR Modules Mechanical Dimensions - casing upright (58-8xx) - casing upright (58-5xx) 3 2,5 2 4 Toleranz der Stiftabstände ±,2mm 44,7 5 (Tolerances grid distance) DC=Date Code 4,5 3,5±,5,5 F=Factory Stift Ø, Kennzeichnung Stift (marking pin ) F DC - casing upright (58-xx) 6,985 5,6 8,89 24,3 25,4 6 5,8 Toleranz der Stiftabstände ±,2mm (Tolerances grid distance) 4,5 3,5±,5* 3, * = vorläufig (preliminary) Stifte,5x,5 (pin,5x,5) F DC DC = Date Code F = Factory - casing flat (555-xxx) Toleranz der Stiftabstände ±,2mm (Tolerances grid distance ) Wicklung evtl. teilweise sichtbar (windings can be partially visible) DC = Date Code F = Factory 9,6x,4 5,2 3,8 3,6 DC F 8 2,54 2,32 29 9,2 4,-,5 - casing flat (552-xxx) Wicklung teilweise sichtbar (windings partially visible) 9,6x,4, 8,3 5,2 3,8 3,6 DC F 8 2,54 2,32 9,2 DC = Date Code F = Factory 29 9,3 3,2 2,54,3 Vorschlag zur Anordnung der Anschlußflächen (Example for pad positions) Toleranz der Stiftabstände ±,2mm (Tolerance grid distance) page 3 Product Information PI-XDSL_ 8/6
ADSL/VDSL Filter Characteristics - ITU-T G.992. Annex B (ISDN) + E3; 58- or 555-8 or 552-45 ETSI TS 952--3, - ISDN port 4B3T (5 Ω) - Insertion loss - Attenuation - - -3-3. 2. 3. 4. 5. 6. 7. 8. 9.. - Return loss f (Hz) -5-7 - -8-9 -3 - -5 - ITU-T G.992. Annex B (ISDN) + E3; 58- or 555-8 or 552-45 ETSI TS 952--3, - ISDN port 2BQ (35 Ω) - Insertion loss - - Attenuation -3 - -5 2 3 4 5 6 7 8 9 f (Hz) -3 - Return loss -5-7 - -8-9 -3 - -5 page 4 Product Information PI-XDSL_ 8/6
ADSL/VDSL Filter Characteristics - ETSI TS 952 - ; 58- or 555-8 or 552-45 POTS port (22Ω+(82Ω//5nF)) - Insertion loss,5 - Attenuation,5 - -,5 - -3 -,5,, 2, 3, 4, - Return loss -5-5 -7-8 - -9-5 - 5-3 - ETSI TS 952 - ; 58- or 555-8 or 552-45 POTS port (27Ω+(75Ω//5nF)) - Insertion loss,5,5 - Attenuation -,5 - -,5 2 3 4-5 - Return loss - -3-5 -7-8 - -9 a R (db) -5-5 -3 - Other filter characteristics are available on request - page 5 Product Information PI-XDSL_ 8/6
ADSL/VDSL Filter Characteristics - ETSI ATA TS 952 -- ; 58-8 POTS port (27Ω+(75Ω//5nF)+ 6Ω) option (A) - -3-5 -7-8 -9 - - -2 - ETSI ATA TS 952 -- ; 58-82 POTS port (27Ω+(75Ω//5nF)) option (B) - -3-5 -7-8 -9 - - -2 - ITU-T G992. Annex A POTS +E ; 58-83 POTS port (6Ω) with BT - -3-5 - -3-5 -7-8 -9 - - -2 page 6 Product Information PI-XDSL_ 8/6
ADSL/VDSL Filter Characteristics - ETSI ATA TS 952 -- ; 58-5 POTS port (27Ω+(75Ω//5nF)+ 6Ω) option (A) - -3-5 -7-8 -9 - - -2 - ETSI ATA TS 952 -- ; 58-52 POTS port (27Ω+(75Ω//5nF)) option (B) - a E (d B ) -3-5 -7-8 -9 - - -2 - Other filter characteristics are available on request - page 7 Product Information PI-XDSL_ 8/6