CURRICULUM VITAE. Personal information. Education. Fields of interest. Alfred van Keulen.

January, 2014 CURRICULUM VITAE Personal information Name: Alfred van Keulen. Education Pre-university training-b Graduation: May 1980. Institution: Hageveld College, Heemstede. Mechanical engineer (M.Sc.) Graduation: 29 April 1987 (cum laude). Institution: Delft University of Technology, Department of Mechanical Engineering, Engineering Mechanics Section. Training periods: ECN, Petten and DFVLR, Braunschweig, Germany. Endorsement: six-year course programme. Doctor of Philosophy in Technical Sciences (Ph.D.) Graduation: 26 January 1993 (cum laude). Institution: Delft University of Technology. Supervisor: Prof.dr.ir. J.F. Besseling. Title thesis: On Refined Triangular Plate and Shell Elements. HRM course ( Leergang 12 ) Human Resource Management for University Managers. Started in 1998, completed in 1999. Media Training April 5, 2005 Fields of interest Computational Mechanics and Structural Optimization, especially the application of these techniques to thin-walled structures and micro/nano devices and precision tools. 1

January, 2014 Professional experience 1987 1994 Assistant professor at the Faculty of Mechanical Engineering and Marine Technology of Delft University of Technology. 1994 Honorary visiting research fellow in Civil Engineering, University of Bradford. 1994 1999 Associate professor at the Faculty of Mechanical Engineering and Marine Technology of Delft University of Technology. 1996 1998 Deputy chairman Engineering Mechanics Section. 1998 2002 Part-time professor at the Faculty of Aerospace Engineering of Delft University of Technology. 1998 2003 Member of the Library Commission for the Faculty of Design, Engineering and Production. 1999 present Personal professorship at the Faculty of Design Engineering and Production of Delft University of Technology (April 1, 1999). 1999 2002 Visiting professor at University of Bradford (appointment for 3 years). 2004 2009 Member of management team of Faculty 3ME. 2004 2007 Member of management team DIMES. 2004 2009 Chairman of the Department for Precision and Microsystems Engineering (roughly 100fte). 2004 2013 Principal Investigator of MicroNed research program (total research budget 57MEuro, subsidy is 28MEuro) 2005 2010 Scientific director of the Delft Research Centre for Mechatronics and Microsystems (roughly 100fte researchers) 2009 present Member of Executive Board Nanonextnl: FES High Tech Systems and Materials programme (Postive decision by Dutch Government on funding: Dec 2009. Total funding: 125MEuro. Total budget 250MEuro) Additional professional activities 1991 2001 Librarian to the Engineering Mechanics section. 1992 1998 Secretary to the Engineering Mechanics section. 1995 2000 Co-founder and chairman DUSTOP (DUtch STructural OPtimization group). November 9, 1995 Symposium Structural Optimization in the Netherlands, at Delft University of Technology. Organization: dr.ir. F. van Keulen and dr.ir. A.J.G. Schoofs. March 13, 1997 Symposium Structural Optimization in the Netherlands, at Eindhoven University of Technology. 2

January, 2014 Organization: dr.ir. A.J.G. Schoofs and dr.ir. F. van Keulen. 1999 2003 Chairman of the Advisory Board on Information of the Faculty of Design, Engineering and Production. 2009 MicroNano Congress in Delft, together with Prof Huub Salemink, +/-550 participants 2013... External examinor University of Limerick, Ierland Professional experience abroad: 1984 DFVLR, Braunschweig, Germany, 2 months. 1994 ICNME, Barcelona, Spain, 1 week. 1994 University of Bradford, Bradford, U.K., 2 months. 1995 University of Bradford, Bradford, U.K., 6 weeks. 1995 1996 University of Wales, Swansea, U.K., 5 weeks. 1998 University of Florida, USA, 2 months. 2007 Department of Micro Engineering, Kyoto University, 2 months (Oct. Dec. 2007) 2008 Institute of Mechanical Systems, Department of Mechanical and Process Engineering, ETH Zurich, 6 months Research funds NWO-BC: MARC Zoetermeer: TUD: NWO-BC: Unilever FPU: NWO-BC: Van Leer R&D: 1994, JRP050, Dr.V.V. Toropov, Travelling grant, Optimization of geometrically nonlinear thin-walled structures based on FEM simulation and multi-point approximation techniques, 2x2 months. 1994, Adaptive Mesh Refinement, 12.5kf. 1994-1995, Dr.A.A. Polynkine, Research fellow, Optimalisatie van met continue vezels versterkte thermoplastische produkten (Optimization of continuously fibre reinforced thermoplastic products), 1 year. 1995, JRP185, Dr.V.V. Toropov, Travelling grant, Development of structural optimization strategies which apply adaptive mesh refinement, 2x35 days. 1995-1996, ir. R. van Dijk, Analyse van dunwandige verpakkingen (Analysis of thin-walled packages), 50kf. (Salary excluded). 1995-1996, JRP212, Prof. E. Hinton, Travelling grant, Combined shape and topology optimization with adaptivity, 2x35 days. 1996, ir. M. Klunne, Analyse van drums (Analysis of drums), 3

January, 2014 NWO: DLR, Stuttgart: TUD: TUD: Unilever FPU: TUD: TUD: TUD: DSM-Research: TUD: TUD: STW: TUD: EU: 30kf. 1996-1997, Dr.A.A. Polynkine, Postdoc, Topology optimization of thin-walled structures using bubble methods and adaptivity, 1 year postdoc salary. Constitutive models for woven fabric reinforced thermoplastics, 1 Ph.D. student. 1996-1997, Dr.V.V. Toropov, Visiting Professor, Structural Optimization, 6 months. 1996, Incentives Fund, Analyse en optimalisatie van dunwandige met continue vezels versterkte thermoplastische produkten (Analysis and optimization of thin-walled continuously fibre reinforced thermoplastic products), 35kf. 1996-2000, ir. R. van Dijk, AIO, Optimalisatie en ontwerp van dunwandige verpakkingen welke worden geproduceerd m.b.v. blow-moulding (Optimization and design of thin-walled packages which are produced by means of blow-moulding), 440kf. 1996-1997, Prof. Mukhopadhyay, Visiting Professor, Scheurgroei in scheepsconstructies (Crack growth in shipconstruction), 6 months, together with Marine Technology. 1999, Postdoc, Development and Application of Response Surfaces Using Design Sensitivities, 6 months postdoc salary. 1999-2005, DIOC-program Development of Improved endoprostheses for the upper EXtremities (DIPEX). Program management: Stassen, Van der Helm and Van Keulen; ±4.5Mfl. 2000-2001, Post-doctoral research fellowship: Utilization and improvement of an impregnation unit ; 260kfl. 2000, Postdoc, An investigation of the relationship between density, anisotropy and remodelling in trabecular bone in the glenoid region of the scapula, 12 months senior postdoc salary. 2001, Design of MEMS-based Catheters, 1 Ph.D. + associate professor. 2001, Joint project with Eindhoven University of Technology (Two Ph.D. s at TUE, one Ph.D. at DUT and one Ph.D. at DUT, but funded by Koiter Institute Delft) on: Sequential approximate design optimization including uncertainties, discontinuities and discrete design variables. Program leader: F. van Keulen. 2002, Collaboration with Erasmus University Rotterdam, 16kEuro. 2001, INTAS - International Association for the promotion of cooperation with scientists from the New Independent States of the former Soviet Union Project proposal no. 600: Experimental and numerical modelling of the response of damaged and undamaged masonry to static and dynamic loading. 7200 Euro. 4

January, 2014 DFG-STW-NWO: Multiscale Methods in Computational Mechanics. Pre-proposal for a German - Dutch research group. (Ph.D position, 2004-2009) Airbus: Fast reanalysis (Ph.D. position, together with Van Tooren en Rixen) (2002-2007) Philips Semi cond.: Postdoc, 60k Euro. MicroNed (Initiator, chairman, total budget 56M, ICES-KIS3,later called FES): Model validation and experimental testing of multi-physical interactions in MEMS, 2007-2011, MicroNed, 301 k. Design optimization of a micro coriolis flow sensor, 2008-2009, Demcon, Bronckhorst,, 47 k. Advanced applications of topology optimization, 2009-2010, MicroNed, 128 k. Surface and Interface Effects, 2007-2010, 452 k. Multi-field design optimization of microsystem components, 2007-2012, 200k. Design optimization of reliable microsystem components, 2007-2011, MicroNed, PD-positions Nanonextnl (co-initiator, vice-chairman, total budget 250M, FES): Stability Calibration of Micro/Nano Cantilever structures, 2011-2016, NanoNextNl, 1241 k : 509k, MechWin, Nanosense Dynamics of Micro Nozzles in Large Arrays, 2011-2016 465k, Oce. Topology Optimization of Catalytic Microreactors for Energy Conversion and Storage, 2011-2016, Van Dijk FEM Engineering, 650 k. CRC: Design and optimization of wings for a flapping-wing micro air vehicle, 2013-2017, Chinese research council, 120 k EU: Control Designs for a Flapping Wing Micro Air Vehicle, 2011-2012, EU/Greece research council, 120 k, canceled. STW/NWO/DFG: International working group on Multiscale Methods in Computational Mechanics, exchange with Univ. of Stuttgart, Prof E. Ramm, travel budget, 2004-2009. DRDC (Canada): Experimental and Numerical Modeling in support of a Structural Design Framework for Submarine Pressure Hulls, 2005-2012, PhD project. TNO: Robust Design Optimization for Integrated Photonic Systems, 2010-2015, STW, PhoeniX Software BV, LioniX, TNO, 770 k. STW: Valorisation grant, Commercialising the Electrostatic Pull-in Instability (EPI) calibration method, DELMES - 25k 2011-2012 FOM/Shell: TopSol: Topology Optimization for Solar Panel Electrodes, 2012-2017, Shell-FOM, TNO, Shell, 230 k. Casimir/NWO: Atalanta, 2005-2010, Casimir/NWO, 278 k, DEVLAB member 5

January, 2014 companies. Point-One: Integral Optimization of Designs for Dynamics and Control Performance, 2010-2016, 646 k, Point-one, ASML, MI Partners Point-One: Regeling van resonante compliante systemen, 2011-2016, Pointone, DEVLAB member companies, 490 k. AgNL/Pieken in de Delta: Extreme Motion, Thermal Drift Models and Real-Time Compensations Strategies, 284k, 2010-2014, ASML, MIpartners. NIMR/M2I: Thin film micro-cavities for MEMS packaging, 2006-2010, PhD+PD postion. (PD not appointed), NXP, Philips. TNO: Massively paralleled 2D-array for scanning probe Instruments, 650k, 2 PhD, 2012-2016, TNO NLR: Topology optimization for aircraft movables, NLR, 2010-2014, 1 fully funded PhD researcher + 18k. International cooperation Dr. V.V. Toropov, University of Leeds, U.K. Prof. R.T. Haftka, University of Florida, U.S.A. Prof. I. Elishakov, Florida Atlantic University, U.S.A. Prof. P.J. Prendergast, Trinity College Dublin, Ireland Prof. U. Kirsch, Technion, Isreal Prof. E. Ramm, Stuttgart, Germany Prof Y.Y. Kim, SNU, Seoul, S. Korea Prof. O. Tabata, Kyoto, Japan Dr. M. Yamakawa, Kyoto, Japan Prof. K. Maute, University of Boulder, Co. Dr. J. MacKay, DRDC Prof. R.T, Haftka, UFL Dr. S. Venkataraman, SDSU, Ca. National cooperation ( DEVLAB Medical Faculty, Erasmus, Rotterdam. Leiden Medical Faculty. Dutch Space. TNO 6

January, 2014 NXP Philips Research ALE, Delft. Femto, Delft Van Dijk Engineering BV DSM Research. Airborne Development, Leidschendam Aquamarijn ASML OCE MI-Partners KMWE Participation in Engineering Mechanics Graduate School. Chair belongs to the Centre of Excellence Solids and Fluids University of Groningen DRDC Completed Ph.D. projects: Shape optimization of fabric reinforced products Design sensitivity analysis. H. de Boer, May 23, 2001. Optimization of thin-walled packaging. R. van Dijk, October 8, 2001. Stress Analysis of the Scapula Design Considerations of Glenoid Prostheses, March 5, 2002. (Supervisors: H.G. Stassen, F.C.T. van der Helm and F. van Keulen). Kinematics and stiffness of thermoformed plain-weave laminates Simple models and experimental validation, J. Hofstee, December 2, 2002. Performance Quantification and Simulation Optimization of Manufacturing Flow Lines. J.H. Jacobs (Defend, 13 September 2004, co-promotor at TU/e) Gradient-based Approximate Design Optimization, K.Vervenne, November 1th, 2005. Uncertainty-based Design Optimization of Structures with Bounded-but-Unknown Uncertainties, S. Gurav, December 13, 2005. Topology Optimization using a Topology Description Function Approach, M.J. de Ruiter, December 13, 2005. Simulation of Bone Ingrowth, A. Andreykiv, October 17, 2006 Design optimization of shape memory alloy structures, M. Langelaar, December 15, 2006 (Cum Laude) Micro-Electro-Mechanical Actuators Using Confined Polymers, Gih-Keoung Lau, December 5, 2007. A Graph-Based Optimization Method for the Design of Compliant Mechanisms and Structures, Michael Sauter, Co-promotor at ETH Zurich, May 15, 2008 7

January, 2014 Distributed Optimization for Systems Design An Augmented Lagrangian Coordination Method, Simon Tosserams, Second promotor, TU/e, August 28,2008 A Study on Micro-gripping Technologies, Defeng Lang (Supervisors: F. van Keulen and M. Tichem), October 15, 2008. Development of a Rapid Thermoplastic Impregnation Device, Teun Weustink (Supervisors: F. van Keulen and R. Marissen), December 8, 2008. Wybren Jouwsma, Eredoctoraat, 9 jan 2009 A Unified Approach Towards Decomposition and Coordination for Multi-level Optimization, Albert de Wit, Nov. 30, 2009 Flapping wing actuation using resonant compliant mechanisms - An insect-inspired design, Casper Bolsman, 21 oct. 2010. Mechanics of Ultra-sensitive Nanoelectromechanical Silicon Cantilevers - A Combined Experimental-Theoretical Approach, Hamed Sadeghian Marnani, 15 dec 2010 (Cum Laude). Mechanical Stability of Cementless Implants, The Glenoid Replacement, Daniel R. Suarez Venegas, 25 jan. 2011 (Supervisors: Van Keulen, Rozing, Valstar) Experimental and Numerical Modeling in support of a Structural Design Framework for Submarine Pressure Hulls based on Nonlinear Finite Element Collapse Predictions, John R. MacKay, 28 june, 2012 Characterization of Thin Film MEMS Packages, Qian Li, 3 dec. 2012 Pushing the Boundaries; Level-set Methods and Geometrical Nonlinearities in Structural Topology Optimization, Nico van Dijk, 23 Nov. 2012. Research group (2014) Ph.D.students: +/- 13 (+ 2 vacancies) PostDoc(s): 1 Assistant profs: M. Langelaar, J.F.L. Goosen and 2 vacancies Part time researcher: Dr. H. Sadeghian lecturers: Wisse Final year students: +/-15 Boards and editorships 1998 2000 Book review editor for Design Optimization, International Journal for Product & Process Improvement 1999 Session organizer for the 4th European Solid Mechanics Conference (ESMC4) 2000 Scientific committee of The Fifth International Conference on 8

January, 2014 Computational Structures Technology, 6 8 September, 2000. 2000 Second AIAA/ISSMO Internet Conference on Approximations and Fast Reanalysis in Engineering Optimization May 25 - June 2, 2000. Organizers: T. Baranger and F. van Keulen. 2002 2005 Book review editor for Structural and Multidisciplinary Optimization (Springer). 2002 Third AIAA/ISSMO Internet Conference on Approximations Optimization October 14 18, 2002. Organizers: R.T. Haftka and F. van Keulen. 2003 Scientific committee of Euromech 442, Colloquium of Computer-Aided Optimization of Mechanical Systems, February 23 27, 2003. 2003 Scientific Committee WCSMO-5, May 19 23, 2003. 2004 Editorial Board CST2004: The Seventh International Conference on Computational Structures Technology, Lisbon, 7-9 September 2004. 2004 European Chair, 10th AIAA/ISSMO Multidisciplinary Optimization and Analysis Conference, Aug. 30 Sept. 1, 2004, Albany, New York. 2004 2009 Co-initiator of and member of board MinacNed. 2005 Scientific Committee WCSMO-6. 2005 Technical Committee Eurosime 2005, Berlin 2005-2010 EPSRC review panel 2005-2009 Scientific board of DevLab 2005 2011 Member advisory council NanoNext research program 2006 2009 Member of Academic Council of Point-One. 2007 Scientific Committee WCSMO-7 2007 Assessment committee edicational program Advanced Technologies (Twente, Sept. 2007) 2008 EngOpt 2008, International Conference on Engineering Optimization, Rio de Janeiro, 2-5 June 2008. 2008 Scientific Committee WCSMO-8 2009... Executive board Nanonextnl (vice chair) 2010 Scientific Committee EngOpt 2010 2011 Invited specialist at DEVLAB strategy meeting 2011... Member of NMP klankbord groep 2012 Review panel VUB 2012... Board member Holland Instrumentation 2012... Board member of Graduate School Engineering Mechanics 2013 Scientific Committee WCSM-10 2013 Assessment committee edicational program Advanced Technologies (Twente, Oct. 2013) 9

January, 2014 2014 Program committee RapidPro 2014 2014 Scientific Committee EngOpt 2014 2014 Scientific Committee ASPE Spring Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, April 2014, Berkeley Awards: Best poster award MicroMechanics Europe 2005: Actuated Elastomers with Rigid Vertical Electrodes, G.K. Lau, J.F.L. Goosen, F. van Keulen, P.M. Sarro. In-plane Thermal Unimorph Using Confined Polymers" has been awarded 1 of the 3 best posters in the MME 2006 at Southampton held on 3th-5th September Best poster presented at 20th MME 2009, Toulouse, France: On the Size-Dependent Elastic Behavior of Silicon Nanocantilevers, Sadeghian, H., C.K. Yang, J.F.L. Goosen, A. Bossche, U. Staufer, P.J. French, F. van Keulen Medal for the best poster of 5th International symposium on Surface science and Nanotechnology, 2008, Tokyo. Paper: "Effect of Surface stress on Nanocantilevers". Hamed Sadeghian et al. Most cited paper award (2009) for F. van Keulen, R.T. Haftka, N.H. Kim; Review of Options for Structural Design Sensitivity Analysis. Part1: Linear Systems, Comput. Methods Appli. Mech. Engrg. 194 (2005) 3213 3243. IEEE CPMT Young Award 2008; Hermeticity and Thermal Stability Testing of PECVD Silicon Nitride Thin-Film Packages; Q. Li, J.F.L. Goosen, J.T.M. van Beek, F. van Keulen, K.L. Phan, B. van Velzen, J.J.M. Bontemps, J.J. Koning, G.Q. Zhang On the size-dependent elasticity of silicon nanocantilevers: impact of defects, Sadeghian et al., Journal of Physics D: Applied Physics, selected by the Editors for inclusion in the exclusieve 2011 Highlight collection Keynotes and invited talks (incomplete): 2005 Eurosim, Berlin 2006 Opening keynote, International Conference on MEMS and Nanotechnology (ICMN06) Kuala Lumpur, Malaysia 14-15 March, 2006 2008 Invited talk at ETHZ (Febr. 2008) 2008 Invited talk at San Diego state university (March 2008) 2008 Seminar at University of Dortmund (Nov. 2008) 2008 Invited seminar DRDC Halifax 2009 Keynote at Eurosim 2009 Invited seminar at UFL (nov. 2009) 10

January, 2014 2009 Invited seminare at North Western (nov. 2009) 2009 Invited presentation at MEMS land symposium, Eindhoven 2010 Keynote at ASMO-UK, London, 2010 2010 Invited seminar at Kyoto University, Tabata lab. 2011 Invited talk at DEVLAB cafe 2011 Invited seminar at TNO Eindhoven 2012 Koiter lecture at EM symposium, Oct 2012 2012 Invited presentation for NEVAT, 2012 2012 Invited seminar at Uetani lab. Kyoto University 2013 Plenary panel speaker at WCSMO, May 2013 2013 Invited speaker at NLR additive manufacturing symposium, Oct. 2013 2013 Invited presentation at Printing the City, Rotterdam, Nov. 2013 11

October 2013 LIST OF PUBLICATIONS Journal papers 1991: Bout, A., F. van Keulen, A mixed element for geometrically and physically nonlinear shell problems, Heron, Vol. 36, pp. 27-36, 1991, ISSN: 0046-7316 Keulen, F. van, A bound on the error in classical theory of laminated plates. Int. J.Engng Science, Vol. 29, No.7, pp. 869-882, 1991, Pergamon Press. 1993: Keulen, F. van, A. Bout and L.J. Ernst, Nonlinear thin shell analysis using a curved triangular element. Comp. Meth. Appl. Mech. Engng. 103 (1993), pp.315-343. Keulen, F. van, A geometrically nonlinear curved shell element with constant stress resultants. Comp. Meth. Appl. Mech. Engng. 106 (1993), pp.315-352. 1995: Polynkin, A.A., F. van Keulen and V.V. Toropov, Optimization of geometrically nonlinear thinwalled structures using the multipoint approximation method. Structural Optimization 9 (2), pp. 105 112, 1995. 1996: Keulen, F. van and J. Booij, Refined consistent formulation of a curved triangular finite rotation shell element, Int. J. Num. Meth. Engng. 39, 2803 2830, (1996). Polynkin, A.A., F. van Keulen and V.V. Toropov, Optimization of Geometrically Nonlinear Structures based on Multi-point Approximation Method and Adaptivity, Engineering Computations, 13, (2/3/4), pp. 76 97, 1996. Polynkin, A.A., F. van Keulen, H. de Boer, O. K. Bergsma and A. Beukers, Shape optimization of thermoformed continuous fibre reinforced thermo-plastic products. Structural Optimization 11, 228 234, 1996. 1997: Boer, H. de and F. van Keulen, Error Analysis of Refined Semi-Analytical Design Sensitivities, Structural Optimization, 14, 1997, 242 247. Boer, H. de and F. van Keulen, Padé approximants applied to a nonlinear finite element solution strategy. Communications in Numerical Methods in Engineering, 13, pp. 229 238, also pp. 593 602, (1997). Keulen, F. van and V.V. Toropov, New Developments in Structural Optimization using Adaptive Mesh Refinement and Multi-Point Approximations, Eng. Opt., vol.29, 1997, 217-234. Keulen, F. van, A. A. Polynkin and V. V. Toropov, Shape Optimization with Adaptive Mesh Refinement: Target Error Selection Strategies, Eng. Opt. 28, 95 125, (1997). 1998: Dijk, R. van, J.C. Sterk, D.Sgorbani and F. van Keulen; Lateral Deformation of Plastic Bottles: Experiments, Simulations and Prevention; Packag. Technol. Sci.11, 91 117 (1998). Keulen, F. van and H. de Boer, Rigorous Improvement of Semi-Analytical Design Sensitivities by Exact Differentiation of Rigid Body Motions, Int. J. Numer. Meth.Engng. 42, 71 91 (1998). 1999: 1

Dijk, R. van, F. van Keulen, J.C.Sterk; The influence of solubility effects on the pressure increase during deformation of closed thin-walled structures. Thin-walled structures 35 25 39, (1999). Keulen, F. van, and V.V. Toropov; The Multi-Point Approximation Method in a Parallel Computing Environment, ZAMM, 79 (S1), S67 S70, (1999). 2000: Boer, H. de, and F. van Keulen; Refined semi-analytical design sensitivities, Int. J. Solidsand Structures 37 (46 47), 2000, 6961 6980. Dijk, R. van, F. van Keulen and J.C.Sterk; Simulation of closed thin-walled structures, Int. J. of Solids and Structures 37 (2000), 6063 6083. Hofstee, J. and F. van Keulen; Elastic stiffness analysis of a thermo-formed plain weave fabric composite; Part II: analytical models, Composite Science and Technology, 60 (2000), 1249 1261. Hofstee, J., H. de Boer and F. van Keulen; Elastic stiffness analysis of a thermoformed plain woven fabric composite; Part I: geometry, Composite Science and Technology, 60 (2000), 1041 1053. 2001: Dijk, R. van, H. de Boer and F. van Keulen; Accurate design sensitivities for closedfilled structures application to plastic bottles, Struct Multidisc Optim 21 (2001) 3, 239-245. Hofstee, J. and F. van Keulen, 3-D geometric modeling of a draped woven fabric, Composite Structures 54 (2/3), 179 195, 2001. Vervenne, K., H. de Boer and F. van Keulen, Accuracy and implementation of refined second order semi-analytical design sensitivities; ZAMM, 81, Supplement 3, S699 S700, 2001. 2002: Boer, H. de, F. van Keulen and K. Vervenne; Refined second order semi-analytical design sensitivities, Int. J. Num. Meth. Engng 2002, 55, 1033-1051. Fatemi, J., F. van Keulen and P.R. Onck; Generalized Continuum Theories: Application to Stress Analysis in Bone. Meccanica 37, 385-396, 2002. Hofstee, J., H. de Boer and F. van Keulen, Elastic stiffness analysis of a thermoformed plainweave fabric composite: III Experimental verification, Composites Science & Technology, 62 (3), 2002, 401-418. 2003: Fatemi, J., P.R. Onck, G. Poort and F. van Keulen; Cosserat moduli of anistropic cancellous bone: a micromechanical analysis, J. Phys. IV France 105 (2003), 273 280. Koppel, P.G.J. ten, J.M. van der Veen, D. Hein, F. van Keulen, G.J.V.M. van Osch, H.L. Verwoerd-Verhoef and C.D.A. Verwoerd; Controlling Incision-Induced Distortion of Nasal Septal Cartilage: A Model to Predict the Effect of Scoring of Rabbit Septa, Plast. Reconstr. Surg., 111 (6), 1948-1957, 2003. 2004: Geris, L., A. Andreykiv, H. van Oosterwyck, J. Vander Sloten, F. van Keulen, J. Duyck and I. Naert; Numerical Simulation of Tissue Differentiation Around Loaded Titanium Implants in a Bone Chamber; Journal of Biomechanics, 37 (2004) 763 769. Gupta, S., F.C.T van der Helm, J.C. Sterk, F. van Keulen and B.L. Kaptein; Development and experimental validation of a three-dimensional model of the human scapula, Proc. Instn. Mech. Engrs. Vol 218, Part H2: J. Engineering in Medicine, 2004, 127 142. 2

Gupta, S., F.C.T. van der Helm, F. van Keulen; Stress Analysis of Cemented Glenoid Prostheses in Total Shoulder Arthroplasty, Journal of Biomechanics 37 (2004) 1777 1786. Gupta, S., F.C.T. van der Helm, F. van Keulen; The Possibilities of Uncemented Glenoid Component a Finite Element Study, Clinical Biomechanics 19 (2004) 292 302. Jacobs, J.H., L.F.P. Etman, F.van Keulen, and J.E. Rooda; Framework for sequential approximate optimization, Struct. Multidisc. Optim. 27, 384 400 (2004). Keulen, F. van, and K. Vervenne; Gradient-Enhanced Response Surface Building,Struct. Multidisc. Optim. 27, 337 351, (2004). Langelaar, M. and F. van Keulen, A Simple R-phase Transformation Model for Engineering Purposes, Materials Science and Engineering: A - Structural Materials: Properties, Microstructure and Processing, 378 (1-2) pp. 507-512, July 2004. Ruiter, M.J. de, and F. van Keulen; Topology Optimization using a Topology Description Function. Struct. Multidisc. Optim. 26, 406 416 (2004). 2005: Andreykiv, A., P.J. Prendergast, F. van Keulen, W. Swieczkowski, P.M. Rozing; Bone Ingrowth Simulation for a Concept Glenoid Component Design. Journal of Biomechanics 38, 1023 1033, 2005. Goldfeld, Y., K. Vervenne, J. Arbocz and F. van Keulen; Multi-Fidelity Optimization of Laminated Conical Shells for Buckling, Struct. Multidisc Optim (2005) 30, 128 141. Gurav, S., J. F. L. Goosen and F. van Keulen; Uncertainty-based design optimization using bounded-but-unknown design sensitivities and parallel computing: Application to MEMS. Computers and Structures, 83(14), 1134 1149, 2005. Keulen, F. van, R.T. Haftka, N.H. Kim; Review of Options for Structural Design Sensitivity Analysis. Part1: Linear Systems, Comput. Methods Appli. Mech. Engrg.194 (2005) 3213 3243. Kirsch, U., M. Bogomolni and F. van Keulen; Efficient Finite-Difference Design Sensitivities; AIAA Journal, 43 (2), Febr. 2005, 399 405. 2006: Lau, G.K., J.F.L. Goosen, F. van Keulen, P.J. French and P.M. Sarro; Actuated Elastomers with Rigid Vertical Electrodes, J. Micromech. Microeng. 16 (2006), S35 S44. Moroni, Lorenzo, Gerard Poort, Fred van Keulen, Joost de Wijn and Clemens van Blitterswijk; Dynamic Mechanical Properties of 3D Fiber Deposited EOT/PBT Scaffolds: An Experimental and Numerical Analysis. Accepted for publication in Journal of Biomedical Materials Research: Part A, 2006, 78A (3), 605 614. Schutte, S., S. P. W. van den Bedem, F. van Keulen, F. van der Helm, H. J. Simonsz, A finite element analysis model of orbital biomechanics, Vision Research, 46 (11), 1724 1731. Spruijt, S., J.C. van der Linden, P.D.S. Dijkstra, T. Wiggers, M. Oudkerk, C.J. Snijders, F. van Keulen, J.A.N. Verhaar, H. Weinans, B.A. Swierstra; Prediction of torsional failure in 22 cadaver femora with and without simulated subtrochanteric metastatic defects - A CT scanbased finite element analysis; Acta Orthopaedica 2006; 77 (3): 474 481. Yuan C, van Driel WD, van Silfhout RBR, van der Sluis O, Engelen RAB, Ernst LJ, van Keulen F, Zhang QG. (2006) Delamination analysis of Cu/low-k technology subjected to chemical-mechanical polishing process conditions, MicroElectronics Reliability, 46(9-11), 1679-1684. 3

2007: Lau, G.K., T Chu Duc, J F L Goosen, F van Keulen, P M Sarro (2006) In-plane thermal unimorph using confined polymers, J. Micromech. Microeng. 17 (2007) S174 S183. Lau, G.K., J.F.L Goosen, F. van Keulen, T. Chu Duc, and P. M.Sarro; A powerful polymeric thermal micro-actuator with embedded silicon microstructure; Applied Physics Letters 90 (214103), 2007, p.1-3. 2008: Andreykiv, A., F. van Keulen and P.J. Prendergast, Computational Mechanobiology to Study the Effect of Surface Geometry on Peri-implant Tissue Differentiation. Journal of Biomechanical Engineering (ASME), October 2008, 051015-1 051015-11. Andreykiv, A., Keulen, F. van, Prendergast, P.J.: Simulation of fracture healing incorporating mechanoregulation of tissue differentiation. In: Biomechanics and Modeling in Mechanobiology, Vol.7, No.6, p.443-461, 2008. Langelaar, M. and Van Keulen, F. (2008). Modeling of shape memory alloy shells for design optimization. Computers and Structures, 86(9):955 963. Langelaar, M. and Van Keulen, F. (2008). Sensitivity analysis of shape memory alloy shells. Computers and Structures, 86(9):964 976. Lau G.K., Goosen J.F.L., van Keulen F., Chu Duc T. Sarro P.M.; Polymeric Thermal Microactuator with Embedded Silicon Skeleton: Part 1 - Design and Analysis, J.Microelectromechanical Systems 17(4) 809 822, 2008. Lau G.K., Goosen J.F.L., Van Keulen F.; Thermoelastic Behavior of a Polymeric layer Bonded Between Rigid Interfaces, Int. J. Solids and Structures 45 (2008), 5152 5164. Li, Q., J.F.L. Goosen, J.T.M. van Beek, F. van Keulen, K.L. Phan, G.Q. Zhang, Failure analysis of a thin-film nitride MEMS package, Journal Microelectronics Reliability 48 (2008), pp 1557 1561. Yoon, G.H., Kim, Y.Y., Langelaar, M. and Van Keulen, F. (2008), Theoretical Aspects of the Internal Element Connectivity Parameterization Approach for Topology Optimization. International Journal of Numerical Methods in Engineering, 76(6): 775-797. 2009: Bolsman, C. T. and Goosen, J. F. L. and van Keulen, F.; Design Overview of a Resonant Wing Actuation Mechanism for Application in Flapping Wing MAVs,International Journal of Micro Air Vehicles, 2009,(1),4, pp. 263-272. Janssen, G.C.A.M., M.M. Abdalla, F. van Keulen, B.R. Pujada, B. van Venrooy; Celebrating the 100th anniversary of the Stoney equation for film stress: developments from polycrystalline steel strips to single crystal silicon wafers. Thin Solid Films, Volume 517, Issue 3, January 2009, 1858 1867. Li, Qian, Hans Goosen, Fred van Keulen, Joost van Beek, Guoqi Zhang; Assessment of testing methodologies for thin-film vacuum MEMS packages; Microsyst Technol (2009) 15:161 168. Sadeghian H., J. F. L. Goosen, A. Bossche, F. van Keulen, Surface stress-induced change in overall elastic behavior and self-bending of ultra-thin cantilever plates. Applied Physics Letters. 94, 231908, 2009. Sadeghian, H., C.K. Yang, K. Babaei Gavan, J.F.L. Goosen, E.W.J.M. van der Drift, H.S.J. van der Zant, P.J. French, A. Bossche, F. van Keulen, Effects of surface stress on nanocantilevers, E-Journal of Surface Science and Nanotechnology, 7, 2009, p. 161-166. 4

Sadeghian, Hamed, Chung-Kai Yang, Johannes Goosen, Emile Van der Drift, Andre Bossche, Patrick French, Fred van Keulen; Characterizing Size-dependent Effective Elastic Modulus of Silicon Nanocantilevers Using Electrostatic Pull-in Instability, Applied Physics Letters 94, 221903, 2009. Selected for publication in Virtual Journal of Nanoscale Science and Technology, Vol. 19(24), 2009. Suarez D.R., Valstar E.R., van der Linden J.C., van Keulen F., Rozing P.M.; Effect of rotator cuff dysfunction on the initial mechanical stability of cementless glenoid components, Medical & Biological Engineering & Computing 2009 May; 47(5):507-514. Suarez, DR, JC van der Linden, ER Valstar, P Broomans, G Poort, F van Keulen, PM Rozing. Influence of cementless glenoid prosthesis positioning on its interface micromotions. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine, 2009 November; 223(7):795-804. 2010: Dijk, N.P. van, Yoon, G.H., Van Keulen, A. and Langelaar, M. (2010). A level-set based topology optimization using the element connectivity parameterization method. Structural and Multidisciplinary Optimization 42(2):269--282. Lau, G.K., Goosen, J.F.L., van Keulen, F., Optimum Design of Polymeric Thermal Micro- Actuator with Embedded Silicon Skeleton. IEEE/ASME Journal of Microelectromechanical Systems, vol. 19, no. 4, august 2010, pp. 992-1001. Li, Q., J.F.L. Goosen, J.T.M. van Beek and F. van Keulen; A SOI Pirani Sensor with Triple Heat Sinks; Sensors and Actuators A 162 (2010) 267 271. MacKay, J.R., F van Keulen; A Review of External Pressure Testing Techniques for Shells including a Novel Volume-Control Method, Experimental Mechanics 2010, 50(6), 753 772. Mackay, J.R., M.J. Smith, F. van Keulen, T.N. Bosman, N.G. Pegg; Experimental investigation of the strength and stability of submarine pressure hulls with and without artificial corrosion damage; Marine Structures 23 (2010), 339 359. Sadeghian, H., J. F. L. Goosen, A. Bossche, Barend J. Thijsse, F. van Keulen, Surface reconstruction and elastic behavior of silicon nanobeams: The impact of applied deformation, Thin Solid Films 518 (2010), pp. 3273-3275. Sadeghian, H., J. F. L. Goosen, A. Bossche, F. van Keulen Application of electrostatic pull-in instability on sensing adsorbate stiffness in nanomechanical resonators, Thin Solid Films 518 (2010) 5018 5021. Sadeghian, Hamed, Chung-Kai Yang, Hans Goosen, Andre Bossche, Paddy French, Fred van Keulen, Temperature Sensitivity of Silicon Cantilevers' Elasticity with the Electrostatic Pull-in Instability. Sensors and Actuators A 162 (2010) 220 224. Sadeghian, Hamed, Chung-Kai Yang, J F L Goosen, A Bossche, Urs Staufer, P J French and Fred van Keulen,Effects of size and defects on the elasticity of silicon nanocantilevers, Journal of Micromechanics and Microengineering, Vol. 20, (2010) 064012. Sadeghian, Hamed, Chung-Kai Yang, Khashayar Babaei Gavan, Johannes F L Goosen, Emile W J M van der Drift, Herre S J van der Zant, Andre Bossche, Paddy J French and Fred van Keulen; Some considerations of effects-induced errors in resonant cantilevers with the laser deflection method;. Micromech. Microeng. 20, p.105027-105036, doi: 10.1088/0960-1317/20/10/105027,2010. 2011: Langelaar, M., Yoon, G.H., Kim, Y.Y. and Van Keulen, F. (2011). Topology optimization of planar shape memory alloy thermal actuators using Element Connectivity Parameterization. 5

International Journal for Numerical Methods in Engineering 2011;88:817 840. MacKay, John R., Fred van Keulen, Malcolm J. Smith; Quantifying the accuracy of numerical collapse predictions for the design of submarine pressure hulls; Thin-Walled Structures 49 (2011) 145 156. MacKay, John R., Lei Jiang, Andre H. Glas, Accuracy of nonlinear finite element collapse predictions for submarine pressure hulls with and without artificial corrosion damage. Marine Structures, 24, 2011, p. 292-317. Sadeghian, Hamed, Hans Goosen, Andre Bossche, Barend Thijsse and Fred van Keulen; On the size-dependent elasticity of silicon nanocantilevers: impact of defects; J. Phys. D: Appl. Phys. 44 (2011), p. 0720011-0720016 (6pp). Sadeghian, Hamed, Johannes F.L. Goosen a, Andre Bossche b, Barend J. Thijsse c, Fred van Keulen; Effects of size and surface on the elasticity of silicon nanoplates: Molecular dynamics and semi-continuum approaches; Thin Solid Films 520 (2011) 391 399. 2012: Andreykiv, A., F. van Keulen, D. J. Rixen, E. Valstar A level-set-based large sliding contact algorithm for easy analysis of implant positioning. Int. J. for Numerical Methods in Engineering 89(10) 1317-1336 (2012). Dijk, N.P. van, M. Langelaar, F. van Keulen; Explicit level-set-based topology optimization using an exact Heaviside function and consistent sensitivity analysis, Int.Int. J. Numer. Meth. Engng 2012; 91:67 97, 2012. MacKay, J.R., M.J. Smith, F. van Keulen and T.N. Bosman; Experimental study of the interaction of corrosion damage and out-of-circularity in the collapse of submarine pressure hulls. Trans RINA, Vol 154. Part A3, Intl. J. Maritime Eng. Jul. Sep. 2012, A-157 A-168. Suarez, D.R., H. Weinans, F. van Keulen; Bone remodelling around a cementless glenoid component; Biomech Model Mechanobiol (2012) 11:903 913. Suárez, Daniel R. ; Willem Nerkens; Edward R Valstar ; Piet M Rozing; Fred van Keulen; Interface micromotions increase with less conforming cementless glenoid components; Journal of Shoulder and Elbow Surgery, 21(4), 474 482 (2012). Williams, M.D., F. van Keulen, and M. Sheplak; Modeling of Initially Curved Beam Structures for Design of Multistable MEMS, Journal of Applied Mechanics, JANUARY 2012, Vol. 79 / 011006-1 011006-11. 2013: Dijk, N.P. van, K. Maute M. Langelaar F. van Keulen; Level-set methods for structural topology optimization: a review; Struct Multidisc Optim DOI 10.1007/ s00158-013-0912-y, 2013 (online available). MacKay, J.R. and F. van Keulen; Partial safety factor approach to the design of submarine pressure hulls using nonlinear finite element analysis; Finite Elements in Analysis and Design 65 (2013) 1 16. Rehman, S. ur, Langelaar, M., & Van Keulen, F. (2013). Robust optimization of 2x2 multimode interference couplers with fabrication uncertainties, 862711-862713. doi:10.1117/12.2000647. Suarez, Daniel R., Edward R Valstar, Piet M Rozing and Fred van Keulen; Fracture risk and initial fixation of a cementless glenoid implant: The effect of numbers and types of screws; In: Proc IMechE Part H: J Engineering in Medicine 0(0) 1 9 IMechE 2013 DOI: 10.1177/0954411913491050. 6

Books/chapters in books Bout, A., F. van Keulen, A mixed geometrically nonlinear shell element, In: Integration of Theory and Applications in Applied Mechanics, Eds. J.F. Dijksman and F.T.M. Nieuwstadt, pp. 269 276, Kluwer 1990. Keulen, F. van, A finite rotation triangular shell element, In: Topics of Applied Mechanics, Eds. J.F. Dijksman and F.T.M. Nieuwstadt, pp. 355 362, Kluwer 1993. Keulen, F. van, On refined triangular plate and shell elements, Thesis, TU-Delft 1993, ISBN 90-370-0078-9. Boer, H. de, Van Keulen, F. and Wever, R. An Optimization Based Method for Simulation of Forming Processes of Woven Fabric Reinforced Composites, In: Simulation of Materials Processing: Theory, Methods and Applications, J. Huetink and F.P.T. Baaijens (eds), Balkema, Rotterdam, ISBN 90 54 10 970X, pp. 465 470, (1998). Dijk, R. van, and F. van Keulen; A Finite Rotation Shell Element Taking into account Pneumatic Effects, In: S.N. Atluri and P.E. O Donoghue, Modeling and simulation based engineering, Vol I, 808 813, Tech Science Press, Palmdale, 1998. Bergsma, O.K., F. van Keulen, A. Beukers, H. de Boer and A.A. Polynkine; 3-D Forming of Continuous Fibre Reinforcements for Composites. In: A. Miravete (Ed.); 3-D Textile Reinforcements in Composite Materials, Woodhead Publishing Limited, Cambridge England, ISBN 1 85573 376 5, pp. 241 284 (1999). Ruiter, M.J. de, and F. van Keulen; Topology optimization: approaching the material distribution problem using a topological function description, In B.H.V. Topping (ed.), Computational Techniques for Materials, Composites and Composites Structures, Civil-Comp Press, Edinburgh, 2000, 111 119, ISBN 0 948749 69 5. Vermolen, F.J., A. Andreykiv, E.M. van Aken, J.C. van der Linden, E. Javierre, and A. van Keulen; A Suite of Mathematical Models for Bone Ingrowth, Bone Fracture Healing and Intra- Osseous Wound Healing; In: B. Koren and C. Vuiks (eds.), Advanced Computational Methods in Science and Engineering, Lecture Notes in Computational Science and Engineering 71, Springer-Verlag Berlin Heidelberg, 2010, pp. 289 314. Wit, A. de and F. van Keulen; Framework for Multi-Level Optimization of Complex Systems; In: Multiscale Methods in Computational Mechanics, Progress and Accomplishments, R. de Borst and E. Ramm eds. Springer 2011, ISBN 978-90-481-9808-5, pp. 347 377. Sadeghian, Hamed, Fred van Keulen and Hans Goosen; Mechanics of NanoelectromechanicalSystems: Bridging the Gap between Experiment and Theory; In: Advances in Micro/Nano Electromechanical Systems and Fabrication Technologies, ISBN 978-953-51-1085-9, edited by Kenichi Takahata ; available online: 2013. Sadeghian, Hamed, Fred van Keulen and Hans Goosen; Mechanics of Nanoelectromechanical Systems: Bridging he Gap between Experiment and Theory; In: Advances in Micro/Nano Electromechanical Systems and Fabrication Technologies, ISBN 978-953-51-1085-9, edited by Kenichi Takahata ; available online: 2013. Conference proceedings 1994: Booij, J. and F. van Keulen, Consistent formulation of a triangular finite rotation shell element, 7

Proceedings of the first International DIANA Conference on Computational Mechanics, In: DIANA Computational Mechanics 94, Eds. G.M.A. Kusters and M.A.N. Hendriks, pp. 235 244, Kluwer 1994. Keulen, F. van, V.V. Toropov and A.A. Polynkine, Optimization of geometrically nonlinear shell structures using adaptivity, Proceedings of Fifth AIAA/USAF/NASA/ISSMO Symposium, AIAA 94-4361, pp. 995 1006, 1994. 1995: Keulen, F. van, V. V. Toropov and A. A. Polynkine, Shape optimization strategies using the multi-point approximation method and adaptive mesh refinement. In: N.Olhoff and G.I.N. Rozvany (eds.), WCSMO-1, First World Congress of Structural and Multidisciplinary Optimization, Pergamon, pp. 67 74, 1995. 1996: Boer, H. de, and F. van Keulen, Padé approximants applied to a nonlinear finite element solution strategy. In: J.A.Désidéri et al. eds., Numerical Methods in Engineering 96, Proceedings of the Second ECCOMAS Conference on Numerical Methods in Engineering, 9 13 September, 1996, Paris, France, John Wiley & Sons, Ltd.1996, pp. 171 176, ISBN 0-471- 96692-4. Keulen, F. van, and E. Hinton, Topology design of plate and shell structures using the hard kill method, in Advances in structural Engineering Optimization (ed. B.H.V. Topping), pp. 177 188, Civil Comp. Press, Edinburgh, presented at the Third International Conference in Computational Structural Technology in Budapest, 21 23 August, 1996, ISBN 0-948749-42-3. Keulen, F. van, V. Toropov and V. Markine, Recent refinements in the multi-point approximation method in conjunction with adaptive mesh refinement, In: J.M. Mc-Carthy (ed.), Proceedings of The 1996 ASME Design Engineering Technical Conferences and Computers in Engineering Conference, August 18 22, Irvine California, 96-DETC/DAC-1451, 12p., ISBN 0-7918-1232-4. Toropov, V.V., F. van Keulen, V. Markine and H. de Boer, Refinements in the Multipoint Approximation Method to Reduce the Effects of Noisy Structural Responses. In: 6th AIAA/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Bellevue WA, September 4 6, 1996, Part 2, A Collection of Technical Papers, AIAA 96 4087 CP, pp. 941 951, ISBN 1-56347-218-X. 1997: Boer, H. de, and F. van Keulen; Improved Semi-Analytic Design Sensitivities for a Linear and Finite Rotation Shell Element; In: W. Gutkowski and Z. Mróz (eds.), WCSMO-2, Second World Congress of Structural and Multidisciplinary Optimization, 1997, pp. 199 204, ISBN 83-905454-7-0. 1998: Boer, H. de, F. van Keulen and R. Wever; Simulating forming processes of fabric reinforced composites by applying optimization, AIAA-98-4842, In: 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis, Missouri, September 2 4, 1998, Part 2, p. 1045 1055,(1998). Hofstee, J., F. van Keulen, H. de Boer and K. Stellbrink; Stiffness Analysis of Thermoformed Plain Weave Composites, In: I. Crivelli-Visconti, ECCM-8 European Conference on Composite Materials, Science, Technologies and Applications, 3-6 june 1998, Naples, Italy, Volume 2, pp.651 658, Woodhead Publishing Ltd., Abington, England, ISBN 1 85573 408 7. Keulen, F. van, and H. de Boer, H.; Refined semi-analytical design sensitivities for buckling, AIAA-98-4761, In: 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis, Missouri, September 2 4, 1998, Part 1, p. 420 429, (1998). Keulen, F. van, and H. de Boer; Accurate Design Sensitivities for Deployable Structures by 8

Exact Differentiation of Rigid Body Modes. In: S. Pellegrino and S. D. Guest (eds.) IUTAM- IASS Symposium on Deployable Structures: Theory and Applications; Cambridge, UK, 6-9 September 1998, August 2000, Kluwer Academic Publishers, Dordrecht pp.201 210. Keulen, F. van, and V.V. Toropov; Multipoint Approximations for Structural Optimization Problems with Noisy Response Functions; ISSMO/NASA/AIAA First Internet Conference on Approximations and Fast Reanalysis in Engineering Optimization, June 14 27, 1998 (CD- ROM). 1999: Boer, H. de, and F. van Keulen; Design sensitivities for optimization based forming simulation; In: V.V. Toropov (ed.) Engineering Design Optimization, Proceedings of 1st, ASMO UK /ISSMO conference, 8 9 July, Ilkley, UK, MCB University Press, Bradford, UK, pp. 67 74, (1999). Boer, H. de, and F. van Keulen; Refined second order semi-analytical design sensitivities. Proceedings of the Third World Congress of Structural and Multidisciplinary Optimization, May 17 21, 1999, Buffalo, New York, CD-ROM (Paper 12-SAM-4). Dijk, R. van, and F. van Keulen; Optimization of plastic packaging; In: V.V. Toropov (ed.) Engineering Design Optimization, Proceedings of 1st, ASMO UK /ISSMO conference, 8 9 July, Ilkley, UK, MCB University Press, Bradford, UK, pp. 135 142, (1999). Dijk, R. van, and F. van Keulen; Simulation of Closed-Filled Structures; Permeability, Solubility and Chemical Reactions. In: W. Wunderlich, Proceedings of the European Conference on Computational Mechanics (ECCM 99) August 31 September 3, 1999, Munich Germany, 19 pages. Dijk, R. van, H. de Boer and F. van Keulen; Accurate design sensitivities for closed filled structures. Proceedings of the Third World Congress of Structural and Multidisciplinary Optimization, May 17 21, 1999, Buffalo, New York, CD-ROM (Paper 47-SAA-3). Hofstee, J. and F. van Keulen; The effect of simple shear on stiffness and strength of fabric laminates, In: T. Massard, Proceedings of the Twelfth International Conference on Composite Materials, Paris, July 5 9, 1999 (CD-ROM) also LTM 1199, 1999. Toropov, V.V., F. van Keulen, V.L. Markine and L.F. Alvarez; Multipoint approximations based on response surface fitting: a summary of recent results; In: V.V. Toropov (ed.) Engineering Design Optimization, Proceedings of 1st, ASMO UK /ISSMO conference, 8 9 July, Ilkley, UK, MCB University Press, Bradford, UK, pp.371 380, (1999). 2000: Dijk, R. van, and F. van Keulen; Deformation of Closed-Filled Packages due to Oxidation, Permeation and Solubility Effects; Proceedings of the IASS-IACM 2000, Fourth International Colloquium on Computation of Shell & Spatial Structures, Eds. M. Papadrakakis, A. Samartin and E. Onate, June 5-7, 2000, Chania-Crete, Greece (LTM-1228, 14 pages). Dijk, R. van, and F. van Keulen; Optimization of food packaging; explorative study to the optimal bottle design (Part 1). Proceedings of the European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000, Barcelona, 11 14 September 2000. CD-ROM Proceedings: ISBN 84-89925-70-4. Hofstee, J. and F. van Keulen, 3-D geometric modeling of a draped woven fabric, In: S. Adali, E.V. Morozov and V.E. Verijenko (eds.), Proc. 3rd Int. Conf. Composites Science and Technology (ICCST/3), Durban, S.A., 11 13 January 2000. Pages 355 360 (ISBN 1-86840- 351-3) Hofstee, J. and F. van Keulen; Effects of geometry deviations on mechanical properties of a plain woven fabric lamina, In: A.G. Gibson (Ed.) Proceedings of the 8 th International Conference on Fibre Reinforced Composites, FRC 2000, Newcastle, U.K. 13 15 September, 9

2000, 276 283, ISBN 1 85573 550 4. Hofstee, J. and F. van Keulen; Stiffness models as interface between drape simulation and structural analysis: an overview; In proceedings of the TexComp 5, The 5 th International Conference on Textile Composites, 18 20 September, 2000, Leuven, Belgium. Keulen, F. van, Boyang Liu and R.T. Haftka; Noise and discontinuity issues in response surfaces based on functions and derivatives. Presented at the 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Atlanta, GA, 3 6 April 2000, Paper AIAA 00 1363. ISBN 1-56347-432-8. Keulen, F. van, R.T. Haftka and X-Y. Qu; Review of options for structural sensitivity calculations. Proceedings of the 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Atlanta, GA, 3 6 April 2000, Paper AIAA 00 1351, ISBN 1-56347-435-2. Also on CDROM ISBN 1-56347-432-8. Oosterom, R., van Keulen F., Rozing P.M. Design considerations of the glenohumeral prosthesis. In: E.K.J. Chadwick, H.E.J. Veeger, F.C.T. van der Helm and J. Nagels (eds.) Proceedings of the third conference of the international shoulder group, 4 6 September 2000, Newcastle upon Tyne, UK, 72 76, ISBN 90-407-2268-4. 2001: Andreykiv A, Prendergast P., van Keulen F., Swieszkowski W.: Modelling of bone ingrowth using poro-elastic theory. Materials of International Symposium: Actual problems of materials mechanics: physicochemical aspects and diagnostics of materials properties, Lviv, Ukraine, 4 7 June 2001: pp.70 71. Fatemi, J. ; Van Keulen, F. and Onck, P.R.; Review of Options for Bone Structural Analysis; In: AIMETA 01, XV Congresso AIMETA di Meccanica Teorica e Applicata, 15th AIMETA Congress of Theoretical and Applied Mechanics, Taormina, 26 29 September 2001, CDROM, ISSN 1592-8950. Keulen, F. van, and K. Vervenne; Efficient Mesh Perturbations for Semi-Analytical Design Sensitivities. In: G. Cheng, Y. Gu, S. Liu and Y. Wang (eds.) Proceedings of The Fourth World Congress of Structural and Multidisciplinary Optimization, June 4 8, 2001, Dalian, China (WCSMO-4), Paper 94, Liaoning Electronic Press, ISBN 7-900312-69-2. Keulen, F. van, H. Damveld, I. Elishakoff and V.V. Toropov; Bounded-but-Unknown Uncertainties in Design Optimization, 42nd Structures, Structural Dynamics and Materials Conference and Exhibit, 16 19 April, 2001, Seattle, WA, AIAA 2001-1242, A01-25380, ISSN 1087-7215, ISBN 1-56347-491-3. Keulen, F. van, K. Vervenne and H. de Boer; Accuracy Improvement of Semi-Analytical Design Sensitivities An Overview of Recent Developments. In: O.M. Querin (Ed.), Engineering Design Optimization, Product and Process Improvement, Proceedings of 3rd ASMO-UK / ISSMO conference Harrogate, North Yorkshire, 9-10 July 2001, 227 236. University Press Leeds, ISBN: 0-85316-219-0, also available on CDROM, ISBN: 0-85316- 222-0. Lauridsen, S., R. Vitali, F. van Keulen, R. T. Haftka and J. I. Madsen; Response Surface Approximation using Gradient Information. In: G. Cheng, Y. Gu, S. Liu and Y.Wang (eds.) Proceedings of The Fourth World Congress of Structural and Multidisciplinary Optimization, June 4 8, 2001, Dalian, China (WCSMO-4), Paper 171, Liaoning Electronic Press, ISBN 7-900312-69-2. Ruiter, M.J. de, and F. van Keulen;Topology Optimization Using the Topology Description Function.In: G. Cheng, Y. Gu, S. Liu and Y. Wang (eds.) Proceedings of The Fourth World Congress of Structural and Multidisciplinary Optimization, June 4 8, 2001, Dalian, China (WCSMO-4), Paper 230, Liaoning Electronic Press, ISBN 7-900312-69-2. 10

Vervenne, K. and F. van Keulen; Accuracy Improvement of Semi-Analytical Design Sensitivities by Laplacian Smoothing, 42nd Structures, Structural Dynamics and Materials Conference and Exhibit, 16 19 April, 2001, Seattle, WA, AIAA 2001-1497, A01-25415, ISSN 1087-7215, ISBN 1-56347-491-3. 2002: Andreykiv, A., P. J. Prendergast, F. van Keulen, W. Swieszkowski. Bone ingrowth simulation of a Glenoid Component with Porous Tantalum Backing. Proceedings of the 4th Meeting of the International Shoulder Group, Cleveland, Ohio, USA. June, 2002. Andreykiv, A., P. J. Prendergast, F. van Keulen, W. Swieszkowski. Modelling of bone ingrowth into a porous tantalum mesh of a glenoid component.. Proceedings of the 13th conference of European Society of Biomechanics published in Acta of Bioengineering and Biomechanics (2002) 4, supplement 1, p. 337. Fatemi, J. and F. van Keulen; Finite Element Analysis of Bone Structures Based on Micropolar Continuum Theory, In: Proceedings WCCM-V, Fifth World Congress on Computational Mechanics, July 7 12, 2002, Vienna, Austria, Eds.: H.A. Mang, F.G. Rammerstorfer, J.Eberhardsteiner, ISBN 3-9501554-0-6.. Fatemi, J., P.R. Onck, G. Poort and F. van Keulen; Cosserat Moduli of Anisotropic Cancellous Bone: A Micromechanical Analysis. In S. Cescotto, Proceedings of the Sixth European Mechanics of Materials Conference (EMMC6), Nonlinear Mechanics of Anisotropic Materials, Euromech-Mecamat, Liege, Belgium, Sept. 9 12, 2002, ISBN 2-87047-028-2. Gurav, S., K. Vervenne, H. Damveld and F. van Keulen; Bounded-but-Unknown Uncertainties in Design Optimization by Combining the Multipoint Approximation Method and Design Sensitivities; AIAA 2002-1759, 43rd Structures, Structural Dynamics, and Materials Conference and Exhibit, 22 25 April 2002, Denver, CO., ISBN 1-56347-553-2. Jacobs, J.H., L.F.P. Etman, J.E. Rooda and F. van Keulen; An Object-Oriented Framework for Sequential Approximate Optimization, In proceedings 9th AIAA/ISSMO Symposium and Exhibit on Multidisciplinary Analysis and Optimization, 4 6 September 2002, Atlanta, Georgia, USA, AIAA 2002 5635, ISBN 1-56347-535-9, ISSN 1087-7215. Keulen, F. van, and H. de Boer; Design Perturbation of a Finite Rotation Shell Element; AIAA 2002-1671, 43rd Structures, Structural Dynamics, and Materials Conference and Exhibit, 22 25 April 2002, Denver, CO., ISBN 1-56347-553-2. Keulen, F. van, and K. Vervenne; Gradient-Enhanced Response Surface Building, In proceedings 9th AIAA/ISSMO Symposium and Exhibit on Multidisciplinary Analysis and Optimization, 4 6 September 2002, Atlanta, Georgia, USA, AIAA 2002 5455, ISBN 1-56347- 535-9, ISSN 1087-7215. Ruiter, M.J. de, and F. van Keulen; The Topological Derivative in the Topology Description Function Approach, In: P. Gosling (ed.), Engineering Design Optimization, Product and Process Improvement. Proceedings of the 4th ASMO-UK/ISSMO conference, Newcastleupon-Tyne, UK, 4th-5th July, 2002, pp.160 167. ISBN: 0-7017-0137-4. Also on CDROM ISBN 0-7017-0138-2. Vervenne, K. and F. van Keulen; An Alternative Approach to Response Surface Building using Gradient Information; AIAA 2002-1584, 43rd Structures, Structural Dynamics, and Materials Conference and Exhibit, 22 25 April 2002, Denver, CO. ISBN 1-56347-553-2. Weustink, T., F. van Keulen and R. Marissen; Virtual Prototyping of an Impregnation Device with Convex Rolls; In: Proceedings 10th European Conference on Composite Materials (ECCM-10), Composites for the future, Eds: H.Sol and J. Degrieck, Brugge, Belgium, June 3 7, 2002. 2003: 11

Fatemi, J. and F. van Keulen; Identification of Elastic Constants of Micropolar solids using an optimization approach. In: C. Cinquini, M. Rovati, P. Venini and R. Nascimbene; Proceeding of the Fifth World Congress of Structural and Multidisciplinary Optimization (WCSMO-5) Lido di Jesolo, Italy, May 19 23, 2003, ISBN 88-88412-27-1, 2003, Paper No 37. Fatemi, J., van Keulen, F., Onck, P.R., Tekoglu, C.; On micropolar modeling of cancellous bone, Proceedings of the ASME Bioengineering Conference, Key Biscayne, Florida, June 25-29, 2003. ISBN 0-9742492-0-3. Gurav, S.P., M. Langelaar, J. F. L. Goosen and F. van Keulen; Bounded-butunknownuncertainty optimization of Micro-Electro-Mechanical-Systems, in: K.J. Bathe; Computational Fluid and Solid Mechanics 2003, Proceedings Second M.I.T.Conference on Computational Fluid and Solid Mechanics at M.I.T., June 17-20, 2003, 2291 2293. Gurav, S.P., M. Langelaar, J.F.L. Goosen and F. van Keulen; Different approaches to deal with bounded-but-unknown uncertainties: application to MEMS. In: C. Cinquini, M. Rovati, P. Venini and R. Nascimbene; Proceeding of the Fifth World Congress of Structural and Multidisciplinary Optimization (WCSMO-5) Lido di Jesolo, Italy, May 19 23, 2003, ISBN 88-88412-27-1, 2003, Paper No 76. Keulen, F. van, and H. Goosen; MicroNed, Mechatronics and Microsystems, Symposium Proceedings, Delft, The Netherlands, April 10 11, 2003. Langelaar, M. and F. van Keulen; A simple R-phase transformation model for engineering purposes, ESOMAT 2003, European Symposium on Martensitic Transformation and Shape- Memory, Cirencester, England, August 17 22, 2003. Vervenne, K., R.T. Haftka and F. van Keulen; Response surface method applied to practical response functions in structural optimization. In: C. Cinquini, M. Rovati, P. Venini and R. Nascimbene; Proceeding of the Fifth World Congress of Structural and Multidisciplinary Optimization (WCSMO-5) Lido di Jesolo, Italy, May 19 23, 2003, ISBN 88-88412-27-1, 2003, Paper No 56. Weustink, T. and F. van Keulen; Optimal Spreading of Fiber Bundles Through an Impregnation Device with Convex Rolls, In: B.V. Sankar, P.G. Ifju, T.S. Gates (eds.), American Society for Composites, 18th Annual Technical Conference, University of Florida, Gainesville, Florida, October 19-22, 2003. Weustink, T., F. van Keulen and R. Marissen; Interlaminar shear strength in thermoplastic winding ICCM-14, 14th International Conference on Composite Materials, July 14 18, 2003, San Diego, California, USA. American Society for Composites. ISBN-0-87263-685-2. 2004: Andreykiv, A and F. van Keulen; The effect of micromotions and interface thickness on biophysical stimuli at the bone-implant interface: A finite element study. In proceedings of the 6th International Symposium on Computer Methods in Biomechanics & Biomedical Engineering February 25-28, 2004, Madrid, Spain. Gurav, S. P., Kasyap, A., Sheplak, M., Cattafesta, L., Haftka, R. T., Goosen, J. F. L., and F. van Keulen, 'Uncertainty-based Design Optimization of a Micro Piezoelectric Composite Energy Reclamation Device.', 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Aug 30 Sept 1, 2004, Albany, New York, USA. Gurav, S.P., A. Kasyap, M. Sheplak, L. Cattafesta, R.T. Haftka, J.F.L. Goosen and F. van Keulen; Uncertainty-based Design Optimization of a Micro Piezoelectric Composite Energy Reclamation Device, In: proceedings 10 th AIAA/ISSMO Multidisciplinary Analysis and Optization Conference, 30 august 1 september 2004, Albany, New York, AIAA 2004-4619. Joncas, S., M.J. de Ruiter and F. van Keulen; Preliminary design of Large Wind turbine Blades Using Layout Optimization Techniques, In: proceedings 10 th AIAA/ISSMO 12

Multidisciplinary Analysis and Optization Conference, 30 august 1 september 2004, Albany, New York, AIAA 2004-4655. Keulen, F. van, K. Vervenne and C. Cerulli; Improved combined approach for shape modifications, In: proceedings 10 th AIAA/ISSMO Multidisciplinary Analysis and Optization Conference, 30 august 1 september 2004, Albany, New York, AIAA 2004-4378. Keulen, F. van, U. Kirsch, K. Vervenne and C. Cerulli; Improved combined approach for shape modifications, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Aug 30 Sept 1, 2004, Albany, New York, USA. Kirsch, U., M. Bogomolni and F. van Keulen; Efficient Finite-Difference Design-Sensitivities, In: proceedings 10 th AIAA/ISSMO Multidisciplinary Analysis and Optization Conference, 30 august 1 september 2004, Albany, New York, AIAA 2004-4380. Langelaar, M. and F. van Keulen; Design Optimization of Shape Memory Alloy Structures, In: proceedings 10 th AIAA/ISSMO Multidisciplinary Analysis and Optization Conference, 30 august 1 september 2004, Albany, New York, AIAA 2004-4414. Langelaar, M. and F. van Keulen; Design Optimization of Shape Memory Alloy Structures, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, 2004. Langelaar, M. and F. van Keulen; Modeling of a Shape Memory Alloy Active Catheter, AIAA Paper 2004-1653, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, 2004. Vervenne, K., J. Fatemi, and F. van Keulen; Efficiency Improvement of Response Surface Building using Fast Reanalysis Methods; AIAA-2004-1874, 45th IAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 19-22 April 2004, Palm Springs, California. 2005: Fatemi, J., E. Mooij, S.P. Gurav, A. Andreykiv, and F. van Keulen; Re-entry Vehicle Design Optimization with Integrated Trajectory Uncertainties, To appear in proceedings13th AIAA/CIRA International Space Planes and Hypersonic Systems and Technologies Conference, Capua, Italy, 16-20 May, 2005. AIAA-05-3386. CDROM ISBN: 1563477602. Gurav, S.P., M. Langelaar, and F. van Keulen; Uncertainty-based Design Optimiza tion of Shape Memory Alloy Microgripper using Combined Cycle-based Alternating Anti-optimization and Nested Parallel Computing. In proceedings WCSMO-6 Conference, Rio de Janeiro, May 30 - June 3, 2005. Langelaar, M. and G.H. Yoon and Y.Y. Kim and F. van Keulen; Topology Optimization of Shape Memory Alloy Actuators using Element Connectivity Parameterization. In proceedings 6th World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, Brazil, May 30 - June 3, 2005. Langelaar, M., G.H. Yoon, S. Gurav, Y.Y. Kim and F. van Keulen; Modelling and Design of Shape Memory Alloy Actuators, In: L.J. Ernst et al. Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, Proceedings of EuroSime, Berlin, April 18 20, 2005, pp. 626 633, ISBN0-7803-9062-8, (0-7803-9063-6 CDROM). Invited keynote. Langelaar, M., Yoon, G.H., Gurav, S., Kim, Y.Y. and Van Keulen, F. (2005), Analysis and design techniques for shape memory alloy microactuators for space applications. In Proceedings of the 5th ESA Round Table on Micro/Nano Technologies for Space, 3 5 October, Noordwijk, The Netherlands. Lau GK, Goosen JFL, van Keulen F, French PJ, Sarro PM (2005) Actuated elastomers with rigid vertical electrodes. Proceedings of 16th MME MicroMechanics Europe Workshop, 4-6 13

September 2005, Goteberg, Sweden, pp. 382-385, ISBN 91 631 7553 3. Zeoli, M., F. van Keulen and M. Langelaar; Fast Reanalysis of Geometrically Nonlinear Problems After Shape Modifications. In proceedings 6th World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, Brazil, May 30 - June 3, 2005. 2006: Andreykiv, A., F. van Keulen Effect of surface geometry and local mechanical environment on periimplant tissue differentiation: A finite element study. III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering C.A. Mota Soares et.al. (eds.) Lisbon, Portugal, 5 8 June 2006. Langelaar, M. and F. van Keulen, Sensitivity Analysis and Optimization of a Shape Memory Alloy Gripper, in Proceedings of the Eighth International Conference on Computational Structures Technology, B.H.V. Topping, G. Montero and R. Montenegro, (Editors), Civil- Comp Press, Stirlingshire, United Kingdom, paper 202, 2006. Langelaar, M. and F. van Keulen, Sensitivity Analysis of Shape Memory Alloy Shells, in Proceedings of the 3rd European Conference on Computational Mechanics, Lisbon, Portugal, June 5 9, 2006. Langelaar, M. and F. van Keulen; Gradient-based Shape Optimization of an SMA Gripper, in Proceedings of the 8th International Conference of Computational structures Technology, Las Palmas de Gran Canaria, Spain, 12-15 September 2006. Lau, G.K., T Chu Duc, J F L Goosen, F van Keulen, P M Sarro (2006) Electrostatically squeezed elastomers for out-of-plane microactuation, Proceedings CD of the 3rd Asica- Pacific Conference of Transducers and Micro-Nano Technology, Singapore, 25-28 June 2006. Paper ID 95-AT-A0238. (4 pages). Lau, G.K., T Chu Duc, J F L Goosen, F van Keulen, P M Sarro (2006) Electro-thermally activated polymeric stack for linear in-plane actuation, Proceedings of the 5th IEEE Conference on Sensors, Daegu of Korea, October 22-25, 2006, Paper ID 1208 (4 pages) Lau, G.K., T. Chu Duc, J.F.L Goosen, F. van Keulen, P.M. Sarro; In-plane thermal unimorph using confined polymers, Technical digest of 17th Micromechanics Europe, Southampton, 3-5 September, 2006, page 117-120. Lau, G.K., T. Chu Duc, J.F.L. Goosen, F. van Keulen, P. M. Sarro; In-plane Thermal Unimorph Using Confined Polymers, Proceedings of the 17th workshop on Micromachining, Micromechanics and Microsystems (MME '06), Southampton, UK, pp.117-120, Sep. 2006. Wit, A.J. de, A. Lipka, E. Ramm, F. van Keulen; Multi-level optimization of material and structural layout, 3rd European Conference on Computational Mechanics, Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal, 5 8 June, 2006, ISBN-13 978-1- 4020-4994-1 (HB) Published by Springer, Dordrecht, Netherlands. Wit, A.J. de, Lipka, A., Ramm E., and Van Keulen, F. (2006). Multi-level optimization of material and structural layout. In Proceedings of the 3rd European Conference on Computational Mechanics, 5 8 June, Lisbon, Portugal. 2007: Bolsman, Caspar T., Bjorn Palsson, Hans F.L. Goosen, Rob H. Munnig Schmidt and Fred van Keulen, The Use of Resonant Structures for Miniaturizing FMAVs, 3 rd US-European Competition and Workshop on Micro Air Vehicle Systems (MAV07) & European Micro Air Vehicle, Conference and Flight Competition (EMAV2007), 17-21 September 2007, Toulouse, France. Cerulli, C., F. van Keulen, D.J. Rixen; Dynamic Reanalysis and Component Mode Synthesis to Improve Aircraft Modeling for Loads Calculation. Proceedings of the 15th AIAA/ASME/AHS Adaptive Structures Conference, April 23 26, 2007, Waikiki, Hawaii, U.S.A., AIAA Paper 14

2007-2363 CD-ROM Number 7 Johansson, Anders T., Thomas Abrahamsson & Fred van Keulen, Comparison of Several Error Metrics for FE Model Updating, Proceedings of the 25th International Modal Analysis Conference (IMAC-XXV), February 19-22, Orlando, Florida, USA, 2007, ISBN/ISSN: 0-912053-96-8. Langelaar, M. and Van Keulen, F. (2007). Design optimization of shape memory alloy active structures using the R-phase transformation. Proceedings of the 14th International SPIE Symposium on Smart Structures and Materials, 18 22 March, San Diego, CA, U.S.A. Langelaar, M. and Van Keulen, F. (2007). Gradient-based design optimization of shape memory alloy active catheters. Proceedings of the 15th AIAA/ASME/AHS Adaptive Structures Conference, April 23--26, 2007, Waikiki, Hawaii, U.S.A., Paper 2007-1744 CD-ROM Number 7. Langelaar, M., F. van Keulen; Topology Optimization of Shell Strcutures using Element Connectivity Parameterization. In: Proceedings of WCSMO-7, 7th world congress on structural and multidisciplinary optimization, May 21--May 25, 2007, Seoul Korea Ed. B.M. Kwak, ISBN 978-89-959384-2-3 98550, p. 2145-2154. Langelaar, M., F. van Keulen; The use of convex uniform honeycomb tessallations in structural topology optimization. In: Proceedings of WCSMO-7, 7th world congress on structural and multidisciplinary optimization, May 21--May 25, 2007, Seoul Korea Ed. B.M. Kwak, ISBN 978-89-959384-2-3, p. 2469-2478. Lau GK, Chu Duc T, Goosen JFL, Sarro PM, van Keulen F, Power efficient Vshape electrothermal actuator using constrained SU-8, Technical Digest of the14th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS'07), Lyon, France, June 10-17 2007, (Paper ID EA0182). Lau, G.K., J.F.L. Goosen, F. van Keulen; Optimization of Polymeric Electro-Thermal Micro- Actuator for Various Criteria. In: Proceedings of WCSMO-7, 7th world congress on structural and multidisciplinary optimization, May 21--May 25, 2007, Seoul Korea Ed. B.M. Kwak, Paper A0149, ISBN 978-89-959384-2-3 98550. Sadeghian, H., J.F.L. Goosen, A. Bossche, F. van Keulen, Adsorption-induced resonance frequency change in submicron structures. In: Proceedings SAFE 2007, 10 th Annual Workshop on Semiconductor Advances for Future Electronics and Sensors, November 29-30, 2007, p. 621-624. Wit, A. de, and F. van Keulen, Numerical Comparison of Multi-Level Optimization Techniques, AIAA Paper 2007-1895, CD-ROM Number 8, 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Waikiki, Hawaii, 23-26 April 2007. 2008: Bolsman, Caspar T., Johannes F. L. Goosen, and Fred van Keulen; Insect-inspired wing actuation structures based on ring-type resonators Proc. SPIE 6928, 69281I (2008) Mehdi Ahmadian, Editor, March 2008, San Diego, California, USA. Dijk, N.P. van, G.H. Yoon, F. van Keulen, M. Langelaar, A Level-set-based Topology Optimization using the Element-connectivity-parameterization Method, EngOpt 2008, International Conference on Engineering Optimization, Rio de Janeiro, Brazil, June 1-5, 2008, Edited by: José Herskovits, Alfredo Canelas, Henry Cortes, Miguel Aroztegui, ISBN 978857650156-5. Keulen, F. van, Y. Hirai, O. Tabata; Objective Function and Adjoint Sensitivities for Moving- Mask Lithography. In proceedings 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10 12 September 2008, Victoria, British Columbia Canada, AIAA- 2008-5934. 15

Lau, Gih-Keong, Johannes F. L. Goosen, Trinh Chu Duc, and Fred van Keulen, Potential of thermally expandable polymers with embedded skeletons for actuator applications Proc. SPIE 6927, 69271D (2008) Yoseph Bar-Cohen, Editor, March 2008 San Diego, California, USA. Li, Q., J.F.L. Goosen, J.T.M. van Beek, F. van Keulen, K.L. Phan, B. van Velzen, J.J.M. Bontemps, J.J. Koning, G.Q. Zhang, Hermeticity and Thermal Stability Testing of PECVD Silicon Nitride Thin-film Packages. In the proceeding of the conference International Conference on Electronics Packaging 2008, pp 220-225, Japan, 2008. Sadeghian, H., J. F. L. Goosen, A. Bossche, and F. van Keulen; A mechanistic model for adsorption-induced change in resonance response of submicron cantilevers, Proc. SPIE 6885, 68850E (2008) MEMS/MOEMS Components and Their Applications V. Special Focus Topics: Transducers at the Micro-Nano Interface Srinivas A. Tadigadapa, Babak A. Parviz, Albert K. Henning, Editors, February 2008; San Jose, CA, USA Conference Date: 21 January 2008. Wit, A.J. de, and F. van Keulen; Framework for multilevel optimization, CJKOSM5, 5th China- Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Jeju Island, South Korea, 16-19 April, 2008. Yoon, G.H., M.Langelaar and F. van Keulen, Topology Optimization for Layered Shell Structures using the Element Connectivity Parameterization. EngOpt 2008, International Conference on Engineering Optimization, Rio de Janeiro, Brazil, June 1-5, 2008, Edited by: José Herskovits, Alfredo Canelas, Henry Cortes, Miguel Aroztegui, ISBN 978857650156-5. 2009: Bolsman, C. T.; Goosen, J.F.L. & van Keulen, Design Overview of a Resonant Wing Actuation Mechanism for Application in Flapping Wing MAVs, In: Proceedings of EMAV 2009 conference, Delft, September, 2009. Bolsman, C.T.; Goosen, J.F.L. & van Keulen, Design and Realization of Resonant Mechanisms for Wing Actuation in Flapping Wing Micro Air Vehicles, In: F. Silva Gomes, J. & Mequid, S. (ed.) Proceedings of Integrity, Reliability and Failure (IRF),Porto, Portugal, July, 2009. Bolsman, C.T.; Goosen, J.F.L. & van Keulen, F. Compliant Structure Design for Reproducing Insect Wing Kinematics in MAVs. In Proceedings of IFASD conference, Seattle, USA, June, 2009. Dijk, N.P., M. Langelaar and F. van Keulen; A Discrete Formulation of a Discrete Level-set Method treating Multiple Constraints, 8th World Congress on Structural and Multidisciplinary Optimization, Lisbon, Portugal, June 01-05, 2009, ISBN: 978-989-20-1554-5. Keulen, F. van, Y. Hirai, O. Tabata; Automated Optimization of Light Dose Distribution for Moving-Mask Lithography, In: L.J. Ernst, GQ. Zhang, W.D. van Driel, P. Rodgers, C. Bailey, O. de Saint Leger; Proceedings of EuroSimE 2009, Delft April 27 29, 2009, pp.123 131. Li, Q., J.F.L. Goosen, F. van Keulen, J.T.M. van Beek, Gas ambient dependence of quality factor in MEMS resonators, conf. proc. IEEE Sensors 2009, 25-28 october, 2009, Christchurch, New Zealand, ISBN 978-1-4244-5335-1/ ISSN 1930-0395. Li, Q., J.F.L. Goosen, J.T.M. van Beek and F. van Keulen; A novel SOI Pirani sensor with triple heat sinks; Proceedings of the Eurosensors XXIII Conference, 6-9 September 2009, Lausanne, Switzerland, Eds. J. Brugger, D. Briand. Procedia Chemistry 1 (2009) 160 163. Li, Q., J.F.L. Goosen, J.T.M. van Beek, F. van Keulen, G.Q. Zhang; Outgassing of Materials Used for Thin Film Vacuum Packages; 2009 International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP), pp.802-806, ISBN: 978-1- 4244-4659-9. MacKay, J.R., F. van Keulen, M.J. Smith and N.G. Pegg, Collapse Mechanics in Externally 16

Loaded Pressure Vessels with Simulated Corrosion Damage, in: Shell Structures: Theory and Applications (Vol. 2), Proceedings of the 9th SSTA Conference, Jurata, Poland, 14 16 October 2009, pp.315 318, Ed. Wojciech Pietraszkiewicz, Ireneusz Kreja, ISBN: 978-0-415-54883-0. Sadeghian, H., C. K. Yang, K. B. Gavan, J. F. L. Goosen, E. van der Drift, H. van der Zant, P. J. French, A. Bossche, F. van Keulen Effects of surface stress on nanocantilevers. International symposium on surface science and Nanotechnology, Tokyo, e. J. Sur. scie. Nanotech. Vol. 7 (2009), 161 166. Sadeghian, H., C.K. Yang, J.F.L. Goosen, A. Bossche, P.J. French, F. van Keulen, Size effects on the bending stiffness of silicon nanocantilevers. In: Proceedings of ProRISC 2009, 20 th Annual Workshop on Circuits, Systems and Signal Processing, SAFE 2009, 12 th Annual Workshop on Semiconductor Advances for Future Electronics and Sensors., November 26-27, 2009, Veldhoven, The Netherlands, p. 108-111. Sadeghian, H., C.K. Yang, J.F.L. Goosen, A. Bossche, P.J. French, F. van Keulen, Temperature sensitivity of silicon cantilevers with the pull-in instability method. In: Proceedings of the Eurosensors XXIII Conference, 6-9 September 2009, Lausanne, Switzerland, p. 1387-1390. Sadeghian, H., C.K. Yang, J.F.L. Goosen, A. Bossche, U. Staufer, P.J. French, F. van Keulen, On the size-dependent elastic behavior of silicon nanocantilevers. In: Proceedings of the MicroMechanics Europe 2009 Conference, September 20-22, 2009, Toulouse, France, p. 1-4. Sadeghian, H., C.K. Yang, K.B. Gavan, H. Goosen, E. van der Drift, H. van der Zant, P. French, A. Bossche, F. van Keulen; Surface Contamination-induced Resonance Frequency Shift of Cantilevers; Proceedings of the 4th IEEE Int. Conf. on Nano/ Micro Engineering and Molecular Systems, Jan. 5-8. 2009, Shennzhen China, 396 399. Sadeghian, H., J. F. L. Goosen and A. Bossche; Size-Dependent Elastic Behavior of Silicon Nanofilms: Molecular Dynamics Study; In: Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA, Paper: MECE2009-11253, ISBN: 978-0-7918-3863-1. Saputra, P..Geelhoed. J.F.L.Goosen, R.H.Lindken, J.Westerweel. F. van Keulen; Microfabricated Thermal Gradient Separator Device; In: ASME 2009 Micro/Nanoscale Heat and Mass Transfer International Conference. 18-22 Dec 2009, Shanghai, China. pp. 1-8 ISBN: 978-0-7918-3864-8. Saputra, P.F.Geelhoed. J.F.L.Goosen, R.H.Lindken, J.Westerweel. F. van Keulen; Thermal Gradient Induced Motion in Micro Fabricated Fluidic Device; In: Tae Song Kim et al. (edt), Proceedings of μtas Conference 2009. The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences. 1-5 Nov 2009, Jeju Korea. Pp.131-134, CBMS catalog number 09CBMS-0001, ISSN 978-0-9798064-2-1, ISSN 1556-5904. Williams, M.D. and Van Keulen, F., A Rudimentary Discussion on the Optimization of Multistable Microstructures, 8th World Congress on Structural and Multidisciplinary Optimization, Lisbon, Portugal, June 2009, ISBN: 978-989-20-1554-5. Williams, M.D., F. van Keulen and M. Sheplak; Modeling of Initially Curved Beam Structures for Design of Multistable MEMS; In: Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA, Paper: IMECE2009-11330, ISBN: 978-0-7918-3863-1. Yang, C.K., H. Sadeghian, K. Babaei Gavan, J. F. L. Goosen, A. Bossche, E. van der Drift, F. van Keulen, P.J. French, Effect of Laser Deflection Detection on Resonant Cantilever Sensors 978-1-4244-5335-1/09/$26.00 2009 IEEE, IEEE SENSORS 2009 Conference. Yang, C.K., H. Sadeghian, K.Babaei Gavan, J.F.L. Goosen, E. van der Drift, H. van der Zant, 17

A. Bossche, F. van Keulen, P.J. French, Surfaces Induce Errors in Resonance-Shift Sensing, The Sense of Contact Workshop, Zeist, the Netherlands, 2009. 2010: Dijk, N.P. van, M. Langelaar, F. van Keulen; Critical study of design parameterization in topology optimization; The influence of design parameterization on local minima, In: Proceedings of the 2nd Intl. Conf. on Engineering Optimization, Lisbon, Portugal, 6 9 Sept. 2010. ISBN: 978-989-96264-3-0 Editors: H. Rodrigues, J. Herskovits, C. Mota Soares et al., Paper: 1270 Langelaar, Matthijs, Kurt Maute, Nico van Dijk, Fred van Keulen; Investigation of Instabilities Arising in Internal Element Connectivity Parameterization; In: Proceedings of the 2nd Intl. Conf. on Engineering Optimization, Lisbon, Portugal, 6 9 Sept. 2010. ISBN: 978-989-96264-3-0 Editors: H. Rodrigues, J. Herskovits, C. Mota Soares et al., Paper: 1272. Wit, Albert de, Fred van Keulen, Overview of Methods for Multi-Level and/or Multi-Disciplinary Optimization, AIAA-2010-2914, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,18th AIAA/ASME/AHS Adaptive Structures Conference,12th AIAA Non-Deterministic Approaches Conference, 11th AIAA Gossamer Systems Forum, 6th AIAA Multidisciplinary Design Optimization Specialist Conference, Orlando, Florida, Apr. 12-15, 2010. Yamakawa, M. and F.van Keulen; Structural Optimum Design in Conjunction with Transient Dynamic Analysis using Global Direct Search. In: Proceedings of ECCM 2010 IV European Conference on Computational Mechanics Palais des Congrès, Paris, France, May 16-21, 2010. 2011: Dijk, N.P. van, Langelaar, M., Van Keulen, F. (2011). Level-set-based Topology Optimization Using an Exact Heaviside Function and Consistent Sensitivity Analysis. In: Proceedings of the 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, 13--17 June 2011. Verbart, A., Van Dijk, N.P., Del Tin, L., Langelaar, M., Van Keulen, F. Effect of Design Parameterization and Relaxation on Model Responses in Topology Optimization with Stress Constraints. In: Proceedings of the 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, 13--17 June 2011. Yamakawa, Makoto and Fred van Keulen: Derivative-free optimization reflecting the geometry of constraints for nonsmooth dynamic responses, Proc. 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, Paper No. 106_1, 2011. 2012: Hooijkamp, EC. Saathof, R. Keulen, F. van & Eijk, J. van (2012) Measured thermal modes for thermal design optimization. Proceedings of the 12th EUSPEN International Conference, 5-7 June 2012, Stockholm, Sweden: EUSPEN. Hooijkamp, EC. Peters, HJ. Keulen, F. van & Eijk, J. van (2012) Engineering interpretation of eigenvector sensitivities using normalization. Proceedings of the ASPE Summer Topical Meeting on Precision Engineering and Mechatronics Supporting the Semiconductor Industry, 24-26 June 2012, Berkeley, USA: ASPE. Hooijkamp, EC. Keulen, F. van & Eijk, J. van (2012) Modal analysis applied to transient thermal problems. Proceedings of the 8th European Solid Mechanics Conference, 9-13 July 2012, Graz, Austria: EUROMECH. Kempen, Floris C.M., Fred van Keulen, Yoshikazu Hirai and Osamu Tabata; Optimization Techniques for Grayscale Photolithography; In: Proceedings of the 9th ASMO UK Conference Engineering Design Optimization, p. 75-82, Editors: 18

Denis Kelliher, Osvaldo M. Querin, Vassili V. Toropov and Johann Sienz, Cork, Ireland - July 5th 6th, 2012, ISBN: 978-0-85316-311-4. Peters, Hugo J., Johannes F.L. Goosen and Fred van Keulen; Flapping wing performance related to wing planform and wing kinematics; 12th AIAA Aviation Technology, Integration and Operations (ATIO) Conference and 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 17-19 September 2012, Indianapolis, Indiana, USA. Vandyshev, K, Langelaar, M, Keulen, F van and Eijk, J van (2012). Optimal performance of a controlled system with structural parameter variation. In P Shore, H Spaan and T Burke (Eds.), Proceedings of the 12th international conference of the european society for precision engineering and nanotechnology, EUSPEN, June 4-7, 2012, Stockholm, Sweden (pp. 399-402). Stockholm, Sweden: EUSPEN. Vandyshev, Konstantin, Matthijs Langelaar, Fred van Keulen, and Jan van Eijk. Combined topology and shape optimization of controlled structures. In Proceedings of the 3rd International Conference on Engineering Optimization, Rio de Janeiro, Brazil, July 1-5, 2012. Vandyshev, Kostiantyn, Matthijs Langelaar, Fred van Keulen, and Jan van Eijk. Conceptual design of mechatronic machine components using topology optimization. In Proceedings of ASPE 2012 Summer Topical Meeting, Berkeley, California, USA, June 24-26, 2012, pages 32-35. Verbart, Alexander, Matthijs Langelaar, Nico Van Dijk, and Fred Van Keulen. Level Set Based Topology Optimization with Stress Constraints and Consistent Sensitivity Analysis. In Proc. of 8th AIAA MDO Specialist Conf., 23--26 April, Honolulu, Hawaii. Honolulu, Hawaii, 2012. 2013: Hooijkamp, E.C., J. van Eijk, and F. van Keulen, Thermo-Mechanical Design and Optimization Using Transient Modal Analysis, in 10th World Congress on Structural and Multidisciplinary Optimization, 2013, pp. 1 9. Hooijkamp, E., J. Dugge, J. Van Eijk, and F. Van Keulen, Heuristic Design Optimization for Thermal Error Reduction Using Thermal Modes, in 10th International Congress on Thermal Stresses, 2013, pp. 1 4. Kempen, F.C.M., Y. Hirai, F. van Keulen and O. Tabata; Automatic process design for 3d thick-film grayscale photolithography, In: Transducers 2013, Barcelona, SPAIN, 16-20 June 2013, PP. 1625 1628. Peters, Hugo, J., Paolo Tiso, Johannes F.L. Goosen, and Fred van Keulen; Control of the eigensolutions of a harmonically driven compliant structure; In: 4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, V. Papadopoulos, V. Plevris (eds.) Kos Island, Greece, 12 14, June 2013. Peters, Hugo J., Paolo Tiso, Johannes F.L. Goosen, and Fred van Keulen; Control of resonating fwmav structures using repeated eigenvalues, In: International Forum on Aeroelasticity & Structural Dynamics 2013 24-26 June 2013 - Bristol UK. Peters, Hugo J., Johannes F.L. Goosen, Paolo Tiso, Fred van Keulen; Control of Harmonically Driven Resonating Compliant Structures using Local Structural Modifications; ECCOMAS Multibody Dynamics 2013 01-04 July 2013 - Zagreb Croatia Rehman, S. ur, Langelaar, M., & Van Keulen, F. (2013). Robust optimization of unconstrainedproblems using efficient response surface building strategy, WCSMO 10, May, 2013. 19

Rehman, S. ur, Langelaar, M., & Van Keulen, F. Robust Multi-objective Optimiza tion of 2x2 Multimode Interference Coupler Using Expected Improvement, ICTON 2013, June, 2013. Suarez, Daniel R., Edward R Valstar, Piet M Rozing and Fred van Keulen; Fracture risk and initial fixation of a cementless glenoid implant: The effect of numbers and types of screws; In: Proc IMechE Part H: J Engineering in Medicine 0(0) 1 9 IMechE 2013 DOI: 10.1177/0954411913491050. Verbart, Alexander, Matthijs Langelaar, Fred van Keulen; A new approach for stress-based topology optimization: Internal stress penalization. In: 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, US, May, 2013. Zocca, Marco ; Matthijs Langelaar ; Fred van Keulen; Conformal transformation of photonic crystal structures. Proc. SPIE 8632, Photonic and Phononic Properties of Engineered Nanostructures III, 863210 (February 21, 2013); doi:10.1117/ 12.2002801. Prizes Best poster award MicroMechanics Europe 2005: Actuated Elastomers with Rigid Vertical Electrodes, G.K. Lau, J.F.L. Goosen, F. van Keulen, P.M. Sarro. In-plane Thermal Unimorph Using Confined Polymers has been awarded 1 of the 3 best posters in the MME 2006 at Southampton held on 3th-5th September. Medal for the best poster of 5th International symposium on Surface science and Nanotechnology, 2008, Tokyo. Paper: Effect of Surface stress on Nanocantilevers. Hamed Sadeghian et al. Best poster presented at 20 th MME 2009, Toulouse, France: On the Size-Dependent Elastic Behavior of Silicon Nanocantilevers, Sadeghian, H., C.K. Yang, J.F.L. Goosen, A. Bossche, U. Staufer, P.J. French, F. van Keulen Most cited paper award (2009) for F. van Keulen, R.T. Haftka, N.H. Kim; Review of Options for Structural Design Sensitivity Analysis. Part1: Linear Systems, Comput.Methods Appli. Mech. Engrg. 194 (2005) 3213 3243. IEEE CPMT Young Award 2008; Hermeticity and Thermal Stability Testing of PECVD Silicon Nitride Thin-Film Packages; Q. Li, J.F.L. Goosen, J.T.M. van Beek, F. van Keulen, K.L. Phan, B. van Velzen, J.J.M. Bontemps, J.J. Koning, G.Q. Zhang. On the size-dependent elasticity of silicon nanocantilevers: impact of defects, Sadeghian et al., Journal of Physics D: Applied Physics, selected by the Editors for inclusion in the exclusieve 2011 Highlight collection. (Extended) abstracts F. van Keulen, A. A. Polynkine and V. V. Toropov, Shape optimization strategies using the multi-point approximation method and adaptive mesh refinement. Extended abstracts, Lectures WCSMO-1, pp. 110 111, 1995. V.V. Toropov, F. van Keulen and V.L. Markine, Structural optimization in the presence of numerical noise. Extended abstract, posters, WCSMO-1, pp. 24 25, 1995. 20

F. van Keulen and V. V. Toropov, The Effect of Controllable Numerical Noise on Structural optimization with AMR, Abstract, 11. Symposium: Multidisziplinäre Simulations- und Optimierungsprozeduren, Bad Honnef, 2 3 November 1995, SMDU-307, Gerhard Mercator Universität Duisburg, pp. 35. F. van Keulen, V. Toropov and V. Markine, Recent refinements in the multi-point approximation method in conjunction with adaptive mesh refinement, In: J.M. Mc-Carthy (ed.), ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference, Extended Abstracts, The American Society of Mechanical Engineers, pp. 186, 1996. Toropov, V.V.; van Keulen, F.: Structural optimization based on multi-point approximations and adaptive mesh refinement. Paper HH-2, XIX International Congress of Theoretical and Applied Mechanics, 25-31 August 1996, Kyoto. Abstracts, p. 459, Kyoto, 1996. Boer, H. de, Polynkine, A.A., Keulen, F. van, Bergsma, O.K. and Beukers, A.; Optimization of Thermoformed Reinforced Thermoplastic Products Including Effects of Forming Process. In: Third International Conference on Composite Engineering, ICCE/3, New Orleans, July 21 26, 1996. ICCE, New Orleans, 1996, pp. 213 214. Have, M.; Dijkstra, P.D.S.; Van Keulen, F.; Snijders, C.J.; Evaluation of Finite Element Predictions of Pathological Subtrochanteric Fractures due to Metastatic Lesions, Abstracts of posters and videos, III Congress of the European Federation of National Associations of Orthopaedics and Traumatology, Barcelona, April 24 27, 1997, pp. 187 188. Have, M.; Dijkstra, P.D.S.; Van Keulen, F.; Snijders, C.J.; Evaluation of Finite Element Predictions of Pathological Subtrochanteric Fractures due to Metastatic Lesions, In: Leif Ryd (ed.), Transactions Combined 7th Conference of European Orthopaedic Research Society, April 22 23, p. 309, 1997. (ISBN 91-630-5268-7). H. de Boer and F. van Keulen; Improved Semi-Analytic Design Sensitivities for a Linear and Finite Rotation Shell Element; In: W. Gutkowski and Z. Mróz (eds.) Second World Congress of Structural and Multidisciplinary Optimization; Extended Abstracts; May 26 30, 1997, Zakopane, Poland, pp.321 322. F.van Keulen and V.V. Toropov, The multi-point approximation method in a parallel computing environment,gamm, Gesellschaft für angewandte Mathematik und Mechanik, Annual Meeting, Bremen, April 6 9, 1998, Book of Abstracts, pp 65. J.M. van der Veen, P.G.J. ten Koppel, F. van Keulen, G.M.J. van Osch and C.D.A. Verwoerd; A three-layer mechanical model of nasal septal cartilage, Symposium of the Nederlandse Vereniging voor Biomaterialen, Lunteren, november 11 12, 1998. R. van Dijk and F. van Keulen; Simulation of Closed-Filled Structures taking into account permeability and solubility. In: European Conference on Computational Mechanics (ECCM 99) August 31 September 3, 1999, Munich Germany, 644 645. R. van Dijk and F. van Keulen; Deformation of Closed-Filled Packages due to Oxidation, Permeation and Solubility Effects; IASS-IACM 2000, Fourth International Colloquium on Computation of Shell & Spatial Structures, Abstracts, June 5-7, 2000, Chania-Crete, Greece, 530 531. S. Lauridsen, R. Vitali, F. van Keulen, R. T. Haftka and J. I. Madsen; Response Surface Approximation using Gradient Information. To appear in proceedings of The Fourth World Congress of Structural and Multidisciplinary Optimization, June 4 8, 2001, Dalian, China (WCSMO-4). F. van Keulen and K. Vervenne; Efficient Mesh Perturbations for Semi-Analytical Design Sensitivities.To appear in proceedings of The Fourth World Congress of Structural and 21

Multidisciplinary Optimization, June 4 8, 2001, Dalian, China (WCSMO-4). M.J. de Ruiter and F. van Keulen;Topology Optimization Using the Topology Description Function.To appear in proceedings of The Fourth World Congress of Structural and Multidisciplinary Optimization, June 4 8, 2001, Dalian, China (WCSMO-4). Fatemi, J. ; Van Keulen, F. and Onck, P.R.; Mechanical Modeling of Bone Structures; In: Mariano, P.M.; Sepe, V.; Lacagnina, M. (Eds.) AIMETA 01, XV Congresso AIMETA di Meccanica Teorica e Applicata, 15th AIMETA Congress of Theoretical and Applied Mechanics, Taormina, 26 29 September 2001, MS_BIO_05. H. Van Oosterwyck, L. Geris, J. Duyck, M. De Cooman, A. Andreykiv, F. van Keulen, R. Puers, I. Naert, J. Vander Sloten, Experimental and numerical study on mechanoregulation of tissue differentiation around a loaded implant in a bone chamber, ESEM 2003, Halle, Germany, 18-21 September, 2003. H. Van Oosterwyck, L. Geris, J. Vander Sloten, A. Andreykiv, F. van Keulen, J. Duyck, I. Naert, Numerical simulation of tissue ingrowth and differentiation around a loaded implant in a bone chamber, Integrated Systems in Dental Healthcare, Milan, Italy, 29-30 May, 2003. Suarez D.R., van der Linden J.C., van Keulen F., Weinans H. Implementation and Evaluation of Adherent Living Cell Models. Book of Abstracts, pp.50. Abstract and presentation. First Dutch Conference on Bio-Medical Engineering, January 18-19, 2007. Egmond aan Zee, The Netherlands. DR Suarez, ER Valstar, JC van der Linden, PM Rozing, F van Keulen. Differences in the use of pegs and screws in the fixation of glenoid components. International Society of Biomechanics XXII Congress Proceedings. July 2009, Cape Town, South Africa. ISBN 9780620440370 (Abstract). DR Suarez, ER Valstar, JC van der Linden, PM Rozing, F van Keulen. Effect of a degenerated supraspinatus on the initial stability of a cementless glenoid implant, clinical relevance. 7th International Shoulder Group meeting. July 2008, Bologna, Italy. ISBN 9788849130904 (Abstract). DR Suarez, ER Valstar, JC van der Linden, PM Rozing, F van Keulen. Effect of a degenerated supraspinatus on the initial stability of a cementless glenoid implant. 6th Congress of the European Society of Biomechanics. July 2008, Lucerne, Switzerland. Journal of Biomechanics 41(S177), (Abstract). DR Suarez, ER Valstar, PM Rozing, F van Keulen. On the modeling of screws in finite element analysis of a prosthetic scapula. XII International Symposium on Computer Simulation in Biomechanics. July 2009, Cape Town, South Africa.(Abstract). DR Suarez, ER Valstar, JC van der Linden, F van Keulen, PM Rozing. Deep Implantation of Cementless Glenoid Components could Prevent Overstuffing of GH Joint but Hampers the Initial Fixation in the 54th Nordic Orthopaedic Federation (NOF) congress. Amsterdam. June 2008.(Abstract). DR Suarez, JC van der Linden, ER Valstar, PM Rozing, F van Keulen. Prediction of Bone Ingrowth around a Cementless Glenoid Implant Based on Interface Micromotions. 9th International Bone Fluid Flow Workshop, Oral presentation. May 2008. Amsterdam, the Netherlands.(Abstract). Suarez D.R., Broomans P.J., van der Linden J.C., van Keulen F., Oosterlee C.W., Vermolen F.J., Poort G., Rozing P.M.. Influence of Glenoid Prosthesis Alignment on Interface Micromotions Studied Using FE Analysis. Book of Abstracts, pp.162. Abstract and poster. First Dutch Conference on Bio-Medical Engineering, January 18-19, 2007. Egmond aan Zee, The Netherlands. 22

Internal reports F. van Keulen, A family of triangular plate bending elements, May 1992, LTM 979. F. van Keulen, Finite rotation triangular finite elements for thin and thick shells.ltm 1002, 1993. F. van Keulen, Triangular plate bending elements based on assumed strain versus mixedhybrid formulations, LTM 1019, 1993. F. van Keulen, Control of Adaptive Remeshing, LTM 1047, 1994. F. van Keulen, K. Naaijkens, Adaptive Techniques for Nonlinear Finite Shell Elements, LTM 1048, 1994. F. van Keulen and E. Oñate, Comparison between two 9 D.O.F. triangles for thick and thin plate analysis, LTM 1066, March, 1995. S.Gupta, B.L. Kaptein, F.C.T. van der Helm, J.R. de Wijn, C.W. Spoor and F. van Keulen, Three dimensional finite element modelling of human scapula using computer tomography, LTM 1082, August, 1995. A. A. Polynkine and F.van Keulen, Calculation of laminate stiffnesses for thermoformed continuous fibre reinforced thermoplastic composites, LTM 1079, July 1995. Book of abstracts symposium: Structural Optimization in the Netherlands, November 9, 1995, Eds. : F. van Keulen and A.J.G. Schoofs. H. de Boer and F. van Keulen, Pade approximants applied to a nonlinear finite element solution strategy, LTM 1094, 1995. Patents Nederlandse octrooiaanvrage nr.1022244: Verwijdering van een gewikkeld product van een doorn. Lau, G.K.; Chu, D.T.; Goosen, J.F.L.; Van Keulen, A.; Sarro, P.M. Thermische actuator, 2008, NL 2000209 (C2), European Patent Office System and method for micro- and nanoelectromechanical sample mass measurement, Inventors: Hamed Sadeghian, Chung- Kai Yang, Fred van Keulen Date of filing: October, 14, 2009 Application number: NL2003643. Sadeghian, H., C. K. Yang, F. van Keulen, P. J. French, J. F. L. Goosen, A. Bossche. System and method for mirco- and nanoelectromechanical mass determination with improved accuracy, Dutch Patent, NOB ref. no.: P6026895NL. Sadeghian, H., C. K. Yang, J.F.L. Goosen, A. Bossche, P. J. French, F. van Keulen Temperature Sensing with Electrostatic Pull-in Instability, Dutch Patent, NOB ref. no.: P6027025NL. H. Sadeghian, Fred van Keulen, A composite beam having an adjustable stiffness, EP12199410.7. H. Sadeghian, Fred van Keulen, Method for determining a spring constant of a cantilever of an atomic force microscope or scanning probe microscope, and a calibration device for a cantilever, N2009014. H. Sadeghian, C. K. Yang, J.F.L. Goosen, A. Bossche, P. J. French, F. van Keulen Method for determining a spring constant for a deformable scanning probe microscope element, and 23

scanning probe microscope and calibration device arranged for determining a spring constant for a deformable scanning probe microscope element, WO2012064193. 24