Highly Automated Punch and Laser Combination System ACIES Series ACIES 2512T & ACIES 2515T
Highly Automated Completion of Complex Tasks Amada s new ACIES series of punch and laser combination machines provide unmatched productivity and scratch-free processing of complex sheet metal parts. This innovative series features advanced automation and tool change options to meet virtually any production need. The ACIES series boasts extremely fast hit rates, stable processing, versatile forming and the unlimited shape cutting flexibility of a laser. When punching and laser cutting are combined in a single machine there is a vast range of production possibilities. Equipped with an external tool changer and automated options, Amada s ACIES series takes productivity to an entirely new level. Users will profit from the seamless integration of punch and laser processing enhanced by highly efficient and extremely reliable, automated tool changes and material handling. High-Quality and High-Speed Processing High-speed, scratch-free processing Material is transported entirely on a brush table surface to ensure scratch-free processing. The lower turret is recessed under the brush table providing uncompromising down-forming operations by eliminating part obstruction with the lower turret. Highly efficient slug pull prevention mechanism on all stations Inverter-controlled vacuum system helps prevent slug pull. Amount of vacuum is automatically adjusted according to station size. Easy programming, no-track dead zones and optimal tool location A new track structure eliminates the restrictions on tool location. When tools are specified, the optimum tool arrangement is automatically created by reference to their ID. This facilitates programming and improves material utilization.
Continuous Processing Reliable High-Quality Processing Tools are managed through a digital ID system. The ACIES series is engineered to reduce setup errors and maintenance automatically adjusts die height based on tool grind amount. Multi-Purpose Turret (MPT) Features Four Tapping Stations Four tapping stations (supporting inch and metric sizes) can be automatically changed to increase the number of parts that can be tapped on the NCT. When a tapping tool reaches the preset number of hits, it is automatically replaced with a spare. This allows for continuous operation over extended periods of time. Tapping stations have a unique broken-tap detection system which will immediately stop the machine in the event a tap breaks. Automated Tool Changes Eliminate Setup The ACIES series is engineered to change tools while processing parts. The automated tool changer prepares tools in the buffer turret while the machine is punching. Then, automatically changes tools during laser processing. As a result, machine utilization is maximized. Buffer turret Many Material Handling Solutions Available From simple single-pallet load/unload options to fully automated multiple shelf systems with part separation and sorting solutions, the ACIES series can be configured to suit individual customers needs. Part separation by laser TK system provides single part removal and stacking Energy Savings Energy Saving Mode The power consumption of the oscillator and chiller is reduced during punching. Power consumption can be reduced by a maximum of 40% depending on the job being processed. 40% Maximum Possible Reduction Conventional Power Consumption Energy Savings Benefit Laser Cutting Punching Standby
Productivity-Enhancing Features The ACIES can be equipped with multiple automation options. Shown: ASR-M 179 or 300 Tool Capacity Rack Automatic Tool Loader
Easy Tool Rack Loading Unique ZR Turret Design Large Brush Table AMNC/PC Tool ID System
Recessed ZR Turret The lower turret is recessed under the brush table ensuring scratch-free processing of parts. Selected dies rise through an adjustable window in the brush table. The die height automatically compensates for sharpening. Shimming is eliminated. Forming tools can be raised and lowered during material movement to eliminate scratching. A new track structure eliminates restrictions on tool location an issue commonly associated with conventional inner/outer track configurations. A uniform pass line allows forming and punching in adjacent stations. 4 built-in tapping stations (either standard or metric) with tap breakage detection. The unique track structure provides the smallest dead zone. Smallest tool dead zone and no distortion from inner/outer or adjacent station interference. Inverter-controlled Slug Suction unit reduces slug pull (available on all stations). High-Capacity Tool Storage Rack Available in 179 or 300 tool configurations. Tools are stored and automatically loaded into the turret. Tools are transferred to a buffer turret for rapid insertion into the ZR turret. 2 dies are available for each tool (up to 600 dies). Fast, reliable and error-free loading of tools. Up to 7 additional tapping tools can be automatically rotated into the 4 existing tapping stations. Automatic replacement of tools with back-up tool when preset hitcount is reached for continuous operation and minimal down time. Tool ID System Laser-etched QR identification of punches and dies. Punches and dies are immediately identified and tracked for number of hits, sharpening amount and remaining life. Setup errors are eliminated. Tool angle and appropriate die selection are confirmed upon installation. Web-based server allows access of tooling data from any location. New Fanuc 4000i-C Resonator Rapid stand-by mode cycling reduces power consumption. Power consumption reduced up to 40% depending on processing conditions. Reduced chiller demands.
Work Chute A large 15.75" x 60" trap door work chute enables highlyefficient processing without requiring microjoints. Nozzle Cleaner Debris caused by spatter and dust is automatically removed from the nozzle to prevent processing defects. Slug Removal System Available on all stations. Powerful vacuum draws slugs through the die. Punch penetration can be reduced to.039" resulting in faster speeds and reduced wear. Large Brush Table Table size on ACIES allows for full 5' X 10' sheet processing. Brush design allows for scratch-free processing. Reduces noise level. Designed to support up to ¼" material. AMNC/PC PC Control and Network Capabilities Amada s AMNC/PC control with touch-screen offers many productivity enhancing features and benefits. Network-ready. Job status and alarms. Email notification of alerts, jobs in progress, and more. Complete cutting library. Ready to connect with vfactory software. G-Code Editor/Simulator Another powerful feature is the G-code editor and simulator. Features in the editor make it easy to quickly review, edit, and simulate a program. The simulator graphically plots the G-code tool patterns, provides zoom and pan functions, and highlights the associated G-code when a graphic pattern is selected on the touch-screen display. Intelligent Turret Setup Paperless machine setup information is immediately available to operator. Material type, clamp setup, tool information and more can be displayed on the control for operator review.
Dimensions C A B Specifications ACIES Series Dimensions Machine Length (A) 309.84" Machine Width (B) 235.04" Machine Height (C) 104.96" Traverse Range 2512T 2515T Punching Operation (X/Y) 120" x 50" 120" x 60" Laser Operation (X/Y) 98" x 50" 98" x 60" Combined Work Area With Repositioning 120" x 50" 120" x 60" Z-Axis Laser 3.937" Maximum Material Thickness 0.250" Table Loading Weight Traverse Speed (X/YP) Laser Axis (YL) Axis Simultaneously Z-Axis Simultaneously 330 lbs. 3,937/3,149 ipm 3,149 ipm 5,039 ipm 2,362 ipm Processing Accuracy ± 0.0027" (Amada s Punching Pattern) Z-Turret 32 Stations (Max. 4.5") Included Rotation Stations 4 Buffer Turret Punching Force 33 Stations 33 Tons Number of Punching Strokes 0.197" Stroke / 0.039" Feed 630/min. 0.197" Stroke / 1" Feed 400/min. In Marking Mode 1850/min. Table Design Brush Table Parts Chute 15.75" x 60" Machine Frame Bridge Frame Press Drive Servo-Electric Drive Turret /Table Drive AC-Servo Motors Machine Weight 33 tons Oscillator Continuous Laser Output 2/4 kw Fanuc 4000i-c Mutimedia CNC Control Model Fanuc 31i Storage Capacity 440kB Number of Controlled Axes 6 (Not including tool changer) Amada America, Inc. 7025 Firestone Boulevard Buena Park, CA 90621 (714) 739-2111 FAX (714) 670-8020 www.amada.com