Baumer Industrial Cameras Innovative Vision Components for Automated Image Processing
Content Product Portfolio Industrial cameras 3 GigE Vision Standard Intelligent solutions for GigE Vision 4 GigE Vision TXG Cameras Compact GigE cameras 6 EXG Cameras Industrial GigE Vision cameras with CMOS sensors 8 SXG Cameras Dual GigE cameras with Kodak sensors 9 HXG Cameras Dual GigE cameras with CMOS sensors 10 MXG Cameras Board Level cameras for a greater degree of freedom 11 Power over Ethernet PoE cameras and network components 12 Trigger Device GigE Vision Trigger Device for precise camera control 13 IP67 Cameras GigE cameras with IP67 housing 14 FireWire TM IEEE1394 TXD and TXF Cameras Compact FireWire TM IEEE1394b cameras 15 CameraLink SXC Cameras CameraLink cameras with Kodak sensors 16 HXC Cameras High Speed CMOS cameras 17 Camera Integration Software integration and camera accessories 18 Applications Baumer industrial cameras in use 19
Product Portfolio Industrial cameras from Baumer Reliable components for demanding applications Into the future with innovative technologies Baumer is one of the leading global manufacturers of innovative image processing components and offers an extensive product range of high quality industrial cameras. Our clients profit from our many years of vision competence on an international level and our strong development capacities. Our core competence lies in all vision disciplines from sensors to signal processing, from interfaces to drivers, to integrate the camera into the corresponding vision system. The Baumer Product Portfolio Compact industrial cameras with resolutions from VGA up to 8 megapixels Gigabit Ethernet, CameraLink and FireWire TM Innovative improvements like Power over Ethernet, Dual GigE, IP67 cameras and multiple I/Os Our core values We attach great importance to comprehensive personal support for our customers and professional support in order to develop and realize innovative application solutions together. 3
GigE Vision Standard Intelligent solutions for GigE Vision Gigabit Ethernet enables many new applications Photo: Seidenader Maschinenbau GmbH More than just cameras Versatility through innovation Vision systems run many demanding applications these days. A camera design that allows fast and flexible integration is just as important for this as excellent image quality and high frame rates. The GigE Vision cameras from Baumer offer the optimal combination of all these characteristics. Besides using a suitable camera it is also important to select the optimum network components, because only a perfect combination guarantees reliable system operation. This is why camera manufacturer Baumer offers network components it has developed especially to form a complete GigE Vision solution. The introduction of Gigabit Ethernet as a standard interface for industrial image processing allows many new applications. Multiple camera systems in particular can be decisively improved in this way with regard to security, reliability and structural flexibility. Because cameras from Baumer support the GenICam standard they can also be easily integrated into Third Party Software. Industrial cameras and network components Complete equipment from a single source All components support Power over Ethernet (PoE) Off-the-shelf accessories like cables, mountings and lenses Simple software integration using the Baumer-GAPI SDK 4
GigE Vision Standard Simplified system design and cost reduction Baumer introduced Power over Ethernet (PoE) as the first real single cable solution for GigE Vision in order to further simplify the system structure. With the PoE cameras, network components and the innovative Trigger Device, Baumer offers the complete range of GigE components. This combination of modern GigE Vision cameras and hardware components helps you to achieve greater system performance while simultaneously reducing installation and maintenance costs. 5
TXG Cameras Compact GigE cameras Convincing functionality Comprehensive range of industrial cameras Baumer offers many GigE Vision cameras with resolutions of up to 5 megapixels on the basis of modern CCD sensors in its TXG series. These cameras convince users with their excellent image quality and reliable industrial design. The integration of the cameras is simplified by the various mounting points in the camera housing. The cameras are fitted with one input and one output as standard. Additional models with up to 6 digital inputs and outputs are available for complex applications. The powerful GigE interface With a bandwidth of up to 120 MB/s and cable lengths of up to 100 m the GigE interface is the perfect solution for single and multiple camera systems, whereby cost-intensive frame grabbers can be replaced with standard Ethernet components. 6
TXG Cameras Baumer GigE Starter Kit Just unwrap and go... It is easy to put cameras from Baumer into operation quickly with all necessary components by using the TXG Starter Kits. The included Baumer SDK contains all software tools to utilize the full performance of Baumer cameras. Advanced camera features Useful additional functions have been implemented in order to increase the userfriendliness of the TXG cameras. For example the Debouncer offers improved trigger stability, while functions such as the Sequencer or the Timer substantially increase flexibility of image acquisition and illumination. Thanks to MultiCast, images can be provided at different destinations for applications with several PCs. Excellent image quality with 8 and 12 bit Resolutions from VGA up to 5 megapixels Robust industrial design measuring 36 x 36 x 48 mm Advanced features including MultiCast, Trigger Delay, Timer, Debouncer and Sequencer Models with up to 6 digital I/Os Starter Kit simplifies evaluation 7
EXG Cameras Industrial GigE Vision cameras with CMOS sensors Entry level models for diverse requirements Compact design to meet industrial requirements Innovative and high-performance characteristics were combined with modern CMOS technology in the EXG camera series from Baumer. These models, with their attractive price/performance ratio and simultaneously high image quality, are a cost-efficient alternative to CCD cameras. High frame rates can be achieved through direct reading of the freely selectable Region of Interest (ROI). The extremely compact housing design of 36 x 36 x 42 mm also allows simple integration into even the most confined spaces. Resolutions of VGA and 5 megapixels High frame rates in ROI mode Attractive price/performance ratio Excellent 12 bit signal processing Compact housing design 8
SXG Cameras Dual GigE cameras with Kodak sensors Amazing performance at 240 MB/s Speed and resolution without compromises 240 MB/s the double GigE bandwidth can be achieved with the innovation of the Dual GigE interface on the SXG camera. Based on the modern Kodak sensors with Quad Tap technology, these cameras win users over with their excellent image quality and simultaneous high frame rate. In order to guarantee the necessary bandwidth two GigE connections are linked to a Link Aggregation Group (LAG). The integrated PoE technology also removes the need for a separate power supply cable. In addition the further innovative features such as the Sequencer, Trigger Delay and Debouncer also simplify the use of the cameras in highly diverse applications. Doubles standard bandwidth at 240 MB/s Integrated Power over Ethernet technology Full 12 bit images at 1, 2, 4 and 8 megapixels Frame rates up to 120 fps Flexible configurations with 6 digital I/O ports Specifically designed Starter Kit is available Baumer SXG Starter Kit - Just unwrap and go... The Starter Kit enables simple assessment of the SXG cameras. The complete package includes cables, the Baumer SDK and a Gigabit Ethernet PCI express card with 2 GigE connections. These connections have Power over Ethernet, removing the need for any additional power supply. 9
HXG Cameras Dual GigE and CMOS sensors combined for the first time The fastest GigE cameras on the market Precision at top speed The innovative Dual GigE interface from Baumer offers an efficient solution to integrate cameras with fast sensors and high frame rates into a Gigabit Ethernet network. The latest CMOS sensors and Dual GigE interface technology are combined for the first time in the new HXG series. Up to 109 frames/s can be transmitted with resolutions of 2 and 4 megapixels. These high-resolution cameras also offer excellent image quality at high speeds. Highest transfer rates at 240 MB/s Resolutions of 2 and 4 megapixels Frame rates up to 109 fps Flexible, cost-efficient integration The full performance of the powerful CMOS sensors can be utilized with the double GigE bandwidth of 240 MB/s while all the advantages of the standard interface take effect in the image processing systems. This enables, for example, flexible integration into existing systems and transmission distances of up to 100 m with a simultaneous reduction in installation and maintenance costs. 10
MXG Cameras Board Level cameras for a greater degree of freedom The solution for small, cramped installation spaces Limitless flexibility Standard cameras reach their limits in applications in which each millimeter of space counts and a high degree of flexibility is required. The Board Level camera series MXG from Baumer offers the solution for applications that require highly flexible components. The remote sensor circuit board is hardly larger than a 2-Euro piece at 28 x 28 mm and is connected to the system circuit board via a flexprint. The cameras can thus be adjusted individually to their environmental conditions. A lot of technology for a small space The integrated Trigger Delay guarantees simplified synchronization between application and camera while the Sequencer substantially simplifies the acquisition of image series with changing acquisition parameters. Both Packet Delay and Transmission Delay processes are also available for reliable data transmission when operating multiple cameras. Loadable and storable user sets simplify camera integration, and the GigE standard interface can be used to reduce integration and maintenance costs. Flexible integration in almost any mechanical structure Latest CCD and CMOS sensors Resolutions from VGA up to 4 megapixels Supports Power over Ethernet 11
Power over Ethernet PoE cameras and network components Competence from a single source Simplify your installation with Power over Ethernet In the PoE cameras Baumer presents a camera series that was specially developed as a cost-effective single cable solution for Gigabit Ethernet. These cameras allow you to simplify the mechanical structure, reduce installation and maintenance costs and increase the reliability of the vision system. These advantages, combined with cable lengths of up to 100 m, enable new and interesting approaches to the solution of industrial vision applications. PoE network components for industrial use The PoE cameras achieve the best possible results when used with the network components from Baumer such as the GigE Power Switch and GigE Power Injector. These products were developed in accordance with industrial standards for an operating voltage of 48 volt and allow easy mounting on DIN hat rails. Single-cable solution with Power over Ethernet Specially designed industrial network components Injector, 4-Port and 6-Port Switches Operates at 48 volts Jumbo Frame support 12
Trigger Device GigE Trigger Device Precise camera control over the network Simplified process integration and Track & Trace The GigE Trigger Device from Baumer enables the simple integration of process-relevant sensors and actuators into the camera network. With numerous inputs and outputs it offers sufficient connections to integrate light barriers or encoders and to thus realize innovative camera control. The input signals from the sensors are evaluated by the Trigger Device and used for real-time capable triggering of one or several cameras via the network. Based on the image analysis on the PC the Trigger Device is capable of switching the digital outputs that can be used to e.g. control double door systems. The integrated Track & Trace function also allows reliable tracing of multiple objects within the process. The configuration and control of all functions is carried out conveniently via a graphic configuration tool. Real-time triggering of GigE Vision cameras over the network Simplifies integration of sensors and encoders Track & Trace: Reliable tracing of multiple objects Supports Power over Ethernet Graphical configuration tool for easy set-up 13
IP67 Cameras GigE cameras with IP67 housings Designed to perform in harsh industrial environments GigE cameras with waterproof and dustproof housings In order to also fulfill the requirements of harsh industrial environments Baumer also offers cameras in an IP67 protective housing that is waterproof and dustproof in accordance with this protection type. The housing protects the camera with the sensor and all the electronics. The integrated C-Mount connection means that all standard lenses are also securely enclosed without a separate protective housing becoming necessary. An M12 plug rounds off the industrial design and enables a secure connection between the camera and the interface. The IP67 cameras are available with a GigE interface and resolutions up to 5 megapixels. Waterproof and dustproof Assorted tube lengths to fit various standard lenses Resolutions from VGA up to 5 megapixels 14
TXD and TXF Cameras Compact FireWire TM IEEE1394b cameras Simple Integration for Your Application Data transfer rates up to 800 Mbit/s With the TXD and TXF series Baumer is offering two camera lines with FireWire TM interfaces. These cameras use the IEEE1394b standard and convince users with their high data transfer rates of up to 800 Mbit/s. The downward compatibility of the cameras also supports the older IEEE1394a standard. TXD Series DCAM compliance simplifies integration The TXD series uses the standardized DCAM (IIDC V1.31) protocol for data transfer and thus enables simple integration of the camera, whether via the generic programming interface Baumer- GAPI or other image processing software that supports this standard. TXF Series Baumer FCAM, a step ahead of DCAM With its TXF series Baumer has optimized the FireWire TM cameras specifically for use in industrial systems. The cameras with the FCAM driver rely on protocol based and asynchronous data transfer and thus profit from both greater system security and maximum use of the bus bandwidth up to 80 MB/s. Outputs excellent 8 and 12 bit images Resolutions from VGA up to 5 megapixels RGB and YUV interpolation algorithms on board Compact housing design, light weight FireWire TM IEEE1394b and IEEE1394a compliant 15
SXC Cameras CameraLink cameras with Kodak sensors Excellent image quality at high frame rates Comprehensive functionality in a compact design The SX camera platform was developed in order to support high resolution at high frame rates. The high performance Kodak CCD technology was integrated for this purpose. The SXC series uses Quad Tap sensors with 1 to 8 megapixels for excellent image quality at the highest frame rates. Based on the CameraLink interface, the cameras offer high data transfer rates combined with minimal CPU load. Their wide range of functionality, flexible I/O interfaces and a robust housing design make these cameras the ideal solution for many different applications. Resolutions up to 8 megapixels Frame rates up to 120 fps Flexibility with 6 digital I/Os Compact housing design measuring 52 x 52 x 54 mm Specifically designed Starter Kit is available Baumer CameraLink Starter Kit - Just unwrap and go... This Starter Kit was developed specifically for CameraLink cameras and includes both cables and a standard Frame Grabber. The included SDK also supplies all the relevant software tools for simple camera assessment. 16
HXC Cameras High speed CMOS cameras Capturing fast processes The right cameras for demanding industrial applications The highest frame rates combined with resolutions of up to 4 megapixels make the innovative HXC cameras with CMOS sensors the perfect solution for extremely fast image processing applications. Many models with the CameraLink interface that begin at 1,3 megapixels and 180 frames/s also convince users running the fastest application with its top class image quality. The use of different Regions of Interest (ROI) within a full frame also makes it possible to increase image repetition rates to up to 120,000 frames/s.. Resolutions up to 4 megapixels Outstanding frame rates up to 500 fps Configuration tool simplifies software integration 17
Camera Integration Easy camera evaluation Intelligent Software and extensive accessories Baumer-GAPI SDK The Baumer-GAPI is a generic application programming interface (API) and is distinguished by its high degree of stability and power. Simply put, it is easy to integrate any Baumer camera into your software environment. It supports the Windows and Linux (32/64 bit) operating systems with various programming languages (C, C++, C# for.net TM ). Cameras with different hardware interfaces (Gigabit Ethernet, CameraLink, FireWire TM ) can be operated uniformly and at the same time with one PC system. Baumer also supports the following third party software products and many other suppliers Best accessories to complete the system A high quality image acquisition and processing system needs more than just a camera. Properly combining all the components guarantees the best image quality and the success of your application. Baumer helps you select the right accessories for your camera and offers perfectly matched components for every type of interface. Whether you need cables, network components, mounts or lenses, with Baumer, you get everything you need from one, reliable source. 18
Applications Baumer cameras in use Versatile designs support many applications Applications Robotics Quality Control Factory Automation Process Automation Traffic Monitoring Packaging Inspection Print Inspection Medical Engineering Solar Industry Thanks to their versatility and flexibility, Baumer s GigE Vision components are the right solution for a wide variety of applications, especially when quality, security and productivity are critical. One of our core markets is machine vision used for industrial inspection. Throughout the world, thousands of our products are in use by OEM and system integrators and provide our customers with decisive competitive advantages. Baumer is continuously developing new products that meet the needs of our customers and setting benchmarks with innovation and creativity. This allows us to provide completely new solutions in industrial, medical and scientific imaging applications. Photo: Seidenader Maschinenbau GmbH Machine Vision Our GigE cameras are the perfect solution for multi-camera systems used in quality inspection, automation and process optimization. Food & Beverage Track & Trace provided by our GigE Trigger Device enables a reliable tracking of objects during the manufacturing process. Pharmaceutical Inspection Excellent image quality guarantees that critical components in pharmaceutical applications are reliably inspected. 19
Sales Offices Baumer Germany Baumer GmbH Pfingstweide 28 DE-61169 Friedberg Phone +49 (0)60 31 60 07 0 Fax +49 (0)60 31 60 07 70 sales.de@baumer.com Baumer Switzerland Baumer Electric AG Hummelstrasse 17 CH-8501 Frauenfeld Phone +41 (0)52 728 11 22 Fax +41 (0)52 728 11 44 sales.ch@baumer.com Baumer Italy Baumer Italia S.r.l. Via Resistenza IT-20090 Assago, MI Phone +39 (0)245 706 065 Fax +39 (0)245 706 211 sales.it@baumer.com Baumer United Kingdom Baumer Ltd. 33/36 Shrivenham Hundred GB-Watchfield, Swindon, SN6 8TZ Phone +44 (0)1793 783 839 Fax +44 (0)1793 783 814 sales.uk@baumer.com Baumer USA Baumer Ltd. 122 Spring Street Unit C-6 US-CT 06489 Southington Phone +1 800 937 9336 Fax +1 860 628 6280 sales.us@baumer.com Baumer China Baumer (China) Co., Ltd. Building 30 2nd Floor Section A Minyi Road 201 Songjiang district CN-201612 Shanghai Phone +86 (0)21 6768 7095 Fax +86 (0)21 6768 7098 sales.cn@baumer.com Inspired? Visit us at www.baumer.com/cameras Baumer International Baumer Group International Sales P.O. Box Hummelstrasse 17 CH-8501 Frauenfeld Phone +41 (0)52 728 1122 Fax +41 (0)52 728 1144 sales@baumer.com www.baumer.com Find your local partner: www.baumer.com/worldwide Technical data has been fully checked, but accuracy of printed matter not guaranteed. Subject to change without notice. Printed in Germany 10/11 Art.-No. 11086259