Virtual customer integration in the innovation process. René Rohrbeck, Fee Steinhoff and Felix Perder Technische Universität Berlin, An-Institute Deutsche Telekom Laboratories
Content. 1 Introduction 2 Theoretical background 2.1 MAP-CAP paradigm 2.2 Customer Integration 2.3 Virtual Customer Integration 3 Methodology 4 Results 4.1 Focus on idea generation 4.2 Non-monetary motivation sources make it work 4 Conclusion
Benefits are reduction of uncertainty, in-sourcing of competencies and enhancement of success rates of NPD. Benefits of Customer Integration Reduce uncertainty (Ernst 2002) In-source competencies (Gemünden et al. 1996; Iansiti and Clark 1994) Enhance success rates in NPD (Prahalad/ Ramaswamy 2000) Customer needs Preferences Co-designer Mutual learning processes Successful innovators use competence within an extended network
Content. 1 Introduction 2 Theoretical background 2.1 MAP-CAP paradigm 2.2 Customer Integration 2.3 Virtual Customer Integration 3 Methodology 4 Results 4.1 Focus on idea generation 4.2 Non-monetary motivation sources make it work 4 Conclusion
Innovation management has moved from a manufacturer to a customer centric process. Manufacturer active paradigm (MAP) Customer active paradigm (CAP) The manufacturer: identifies target groups discovers customer needs builds and develops promising products The customer: is purely passive Until 1970s "speaks only when spoken to" (von Hippel 1978) From 1970s The customer: is essential to start the innovation process generates ideas formulates concepts implements the innovative idea as prototypes transfers innovation to manufacturer The manufacturer checks market potential develops a marketable innovation produces and commercializes
Customer integration was found to have a significant positive effect on NPD and company success. Theory on customer integration Steinhoff (2006) Lüthje (2000) Singh, Ranchhod (2004) Kahn (2001) Mason, Harris (2005) Ekström, Karlsson (2001) Active use of customer competence is an essential characteristic of customer-oriented innovation processes. Customer orientation is a critical factor both for the success of the company and the new product. A lack of customer orientation continues to be a frequent phenomenon in the process of innovation.
Previous studies have identified various risks and rewards associated with customer integration. Areas Reward Risk Uncertainty Resources better market understanding higher product quality more innovative products access to missing resources faster product development cost reductions potential problems in identifying suitable customers internal barriers to acceptance conflict during interactions high costs of customer integration inefficient product development opportunistic customer behaviour Turnover higher product advantage higher customer loyalty multiplier effects through reference customers excessive orientation towards a niche negative image effects
By using the Internet as a communication channel Virtual Customer Integration yields many benefits. Virtual Customer Integration (VCI) Internet is the prime communication channel Characteristics unidirectional (the customer can post ideas for new products) bidirectional (allowing for discussions between the customer and the manufacturer) interact easier and less costly (Ernst 2004) by-pass intermediaries such as market research firms (Ernst 2004) Benefits enable users to contribute creativity (Füller et al. 2006, Füller 2007) integrating a large number of customers (Füller/Matzler 2007) address customers individually (Füller et al. 2006) learn about wants and needs of specific customer segments (Dahan/Hauser 2002)
Content. 1 Introduction 2 Theoretical background 2.1 MAP-CAP paradigm 2.2 Customer Integration 2.3 Virtual Customer Integration 3 Methodology 4 Results 4.1 Focus on idea generation 4.2 Non-monetary motivation sources make it work 4 Conclusion
Research questions. Following three research questions the study identifies current practices of VCI and identifies enhancement potential. Research questions 1 To what extend do the Euro Stoxx 50 companies use VCI? Within the innovation process phases and to what intensity 2 What are the means by which customers are motivated to participate? 3 What possible extensions and enhancements of VCI practices exist? Building on the best-practice cases
Through the internet we identified VCI platform and classified them by a double review. 1 Data collection 2 Data filtering 3 4 Data interpretation Data validation Intensity 3 4 Data interpretation Data validation 1.Browse corporate website 2. Search annual report 3. Search Internet Filter criteria: Addressed to customers Systematic approach to feed innovation process Enable virtual interaction 1.Classification in: Innovation process phase Motivation source 2. Assessment of intensity Two researchers: First interpreted Second validated 3. Identify archetypes of VCI platforms
The first classification was in regards to what phase of the innovation process was supported. Idea generation Creativity Selection Decision Making Execution Speed Commercialization Cost Search and pre-selection of ideas Market-pull Technology-push Investigation of feasibility Assessment of return on investment Production and test of prototypes Design freeze with essential functions Introduction of innovation in the market Designing the operational processes
The second classification was in regards to the motivation source used to integrate customers in the process. Motivation sources Description Entertainment and curiosity Social recognition Personal need and product usage builds on pure enjoyment of the interaction itself users see participation in such VCI activities as an enjoyable activity which is perceived as intrinsically rewarding (Füller 2007) prime driver of participation in open source software development (Bitzer/Schrettl/Schröder 2007) being part of the group and being recognized by their peers (Wu/Gerlach/Young 2007, Piller 2003) prime motivation source for lead users (von Hipple 1986) users participate in order to solve a specific problem and they benefit directly from the output (Füller 2007) Monetary incentives immediate as well as delayed pay-offs (Füller 2007)
Content. 1 Introduction 2 Theoretical background 2.1 MAP-CAP paradigm 2.2 Customer Integration 2.3 Virtual Customer Integration 3 Methodology 4 Results 4.1 Focus on idea generation 4.2 Non-monetary motivation sources make it work 4 Conclusion
Usage of Virtual Customer Integration tools remains limited. Usage of VCI (Euro Stoxx 50 companies, n=50) Yes 13 37 No
Within the VCI tools the idea generation remains to be the most popular purpose. Usage of VCI along the innovation process (Euro Stoxx 50 companies, n=50) Low 6 Medium 4 3 High 3 2 2 1 1 2 3 2 Idea generation Selection Execution Commercialization
Non-monetary motivation sources make it work, monetary motivation sources are of limited importance. Motivation sources for participation in VCI (Euro Stoxx 50 companies, n=50) Low 2 Medium 6 5 4 High 4 2 2 Entertainment & Curiosity Social recognition Product usage & personal need Monetary incentive
Through cluster analysis we have identified four types of Virtual Customer Integration platforms. VCI type Innovation process phase Motivation source Open Innovator All phases High intensity Non-monetary (emphasis on curiosity and product usage) Outsourcer Idea generation and execution phase Medium to high intensity Monetary (and in some cases also product usage) Idea Seeker Experimenter Idea generation and selection High intensity Various phases Low intensity Non-monetary (emphasis on entertainment, curiosity and product usage) Non-monetary (emphasis on product usage and entertainment)
Open Innovators interact with their customers along the whole innovation process and with high intensity. VCI type Example: Vodafones betavine Open Innovator Outsourcer Idea Seeker Experimenter
Outsourcers integrate external resources but have little proactive interaction with their customers. VCI type Example: Forum Nokia Open Innovator Outsourcer Idea Seeker Experimenter
Idea seekers seek to in-source creativity and use customers to rate these external ideas. VCI type Example: DELLs Ideastorm Open Innovator Outsourcer Idea Seeker Experimenter
Idea seekers seek to in-source creativity and use customers to rate these external ideas. VCI type Example: Philips Live simplicity Open Innovator Outsourcer Idea Seeker Experimenter
Idea seekers seek to in-source creativity and use customers to rate these external ideas. VCI type Example: Lego Ideastorm Open Innovator Outsourcer Idea Seeker Experimenter
Experimenters have only made a first step into VCI, limit their interaction as well as their exposure. VCI type Example: Deutsche Börse Blog Open Innovator Outsourcer Idea Seeker Experimenter
Content. 1 Introduction 2 Theoretical background 2.1 MAP-CAP paradigm 2.2 Customer Integration 2.3 Virtual Customer Integration 3 Methodology 4 Results 4.1 Focus on idea generation 4.2 Non-monetary motivation sources make it work 4 Conclusion
The study has identified a overall limited implementation of VCI tools and some best-practices. Contributions Limitations Some VCI platforms might still be undetected Primary motivation sources were not collected from the actual users Information about actual usage was not collected only the potential has been assessed With the Euro Stoxx 50 companies only 26% of companies used VCI platforms resulting in a small sample size Identification of best-practices Contributions The motivation systems has been identified as a key success criteria for VCI platforms Definition of archetypes will enhances the effectiveness VCI and facilitate its implementation
I am looking forward to the discussion! René Rohrbeck, Fee Steinhoff and Felix Perder Technische Universität Berlin, An-Institute Deutsche Telekom Laboratories
Thank you for your interest. I am looking forward to further discussion. For exchange on The Deutsche Telekom Laboratories Personal contact René Rohrbeck Deutsche Telekom Laboratories Ernst-Reuter-Platz 7, 10587 Berlin +49 30 8353 58536 (Tel) rene.rohrbeck@telekom.de www.rene-rohrbeck.de www.telekom.de/laboratories www.strategic-foresight.eu
Open Innovators interact with their customers along the whole innovation process and with high intensity. VCI type Example: Spreadshirt Open Innovator Outsourcer Idea Seeker Experimenter
References. References 1/7 Alam, I.; Removing the fuzziness from the fuzzy front-end of service innovations through customer interactions, in: Industrial Marketing Management, Vol. 35 (4), p. 468 480, 2006. Athaide, G. A. and R. L. Stump, a taxonomy of relationship approaches during development in technology-based, industrial markets, in: Journal of Product Innovation Management, Vol. 16 (5), p. 469 482, 1999. Bitzer, J., W. Schrettl and P.J.H. Schröder, Intrinsic motivation in open source software development, in: Journal of Comparative Economics, Vol. 35 (1), p. 160 169, 2007. Bonaccorsi, A. and C. Rossi, Altruistic individuals, selfish firms? The structure of motivation in open source software, 2004. Brockhoff, K.; Customers' perspectives of involvement in new product development, in: International Journal of Technology Management, Vol. 26 (5/6), p. 464 481, 2003. Campbell, A. J. and R. G. Cooper, Do customer partnerships improve new product success rates?, in: Industrial Marketing Management, Vol. 28 (5), p. 507 519, 1999. Chidamber, S. R. and H. B. Kon, A research retrospective of innovation inception and success: the technology-push, demand-pull question, in: International Journal of Technology Management, Vol. 9 (1), p. 94 112, 1994. Dahan, E. and J. R. Hauser, The virtual customer, in: Journal of Product Innovation Management, Vol. 19 (5), p. 332 353, 2002. De Ridder, P.; Philips: a leading crowdsourcing example, in: Open Innovators. Online available at: http://www.openinnovators.net/philipscrowdsourcing-sensing-platform [accessed: 2008-02-14] D Hooge, H.; User-Centered Research Fuels Technology Innovation at Intel, in: Technology@Intel Magazine, 2005. Ekström, K. M. and M. Karlsson, Customer oriented product development? An exploratory study of four Swedish SME's, FE-rapport 2001-380, Göteborg, p. 1 30, 2001.
References. References 2/7 Enkel, E., C. Kausch and O. Gassmann, Managing the risk of customer integration, in: European Management Journal, Vol. 23 (2), p. 203 213, 2005. Ernst, H.; Erfolgsfaktoren neuer Produkte. Grundlagen für eine valide empirische Forschung, Wiesbaden, 2001. Ernst, H.; Success factors of new product development: a review of the empirical literature, in: International Journal of Management Reviews, Vol. 4 (1), p. 1 40, 2002. Ernst, H.; Virtual customer integration: Maximizing the impact of customer integration on new product performance, in: S. Albers (Hrsg.), Crossfunctional Innovation Management: Perspectives from Different Disciplines, 2004. Füller, J., M. Bartl, H. Ernst and H. Mühlbacher, Community based innovation: How to integrate members of virtual communities into new product development, in: Electronic Commerce Research, Vol. 6 (1), p. 57 73, 2006. Füller, J.; What motivates creative consumers to participate in virtual new product development?, in: American Marketing Association Summer Educators' Conference, 3 6 August, Vol. 18, p. 111 121, 2007. Füller, J. and K. Matzler, Virtual product experience and customer participation A chance for customer-centred, really new products, in: Technovation, Vol. 27 (1), p. 6 7, 2007. Gemünden, H. G.; Effiziente Interaktionsstrategien im Investitionsgütermarketing, in: Marketing Zeitschrift für Forschung und Praxis, Vol. 2 (1), p. 21 32, 1980. Gemünden, H. G.; Innovationsmarketing. Interaktionsbeziehungen zwischen Hersteller und Verwender innovativer Investitionsgüter, Tübingen, 1981. Gemünden, H. G., T. Ritter and P. Heydebreck, Network configuration and innovation success: An empirical analysis in German high-tech industries, in: International Journal of Research in Marketing, Vol. 13 (5), p. 449 462, 1996.
References. References 3/7 Gerpott, T. J.; Strategisches Technologie- und Innovationsmanagement. Eine konzentrierte Einführung, Stuttgart, 1999. Gruner, K. E. and C. Homburg, Innovationserfolg durch Kundeneinbindung. Eine empirische Untersuchung, in: Zeitschrift für Betriebswirtschaft, Vol. 51 (Ergänzungsheft 1), p. 119 142, 1999. Gruner, K. E. and C. Homburg, Does customer interaction enhance new product success?, in: Journal of Business Research, Vol. 49, p. 1 14, 2000. Gupta, A. K., K. G. Smith and C. E. Shalley, The interplay between exploration and exploitation, in: Academy of Management Journal, Vol. 49 (4), p. 693 706, 2006. He, Z.-L. and P.-K. Wong, Exploration vs. Exploitation: An empirical test of the ambidexterity hypothesis, in: Organization Science, Vol. 15 (4), p. 481 494, 2004. Helm, R.; Planung und Vermarktung von Innovationen. Die Präferenz von Konsumenten für verschiedene Innovationsumfänge unter Berücksichtigung des optimalen Stimulationsniveaus und marktbezogener Einflussfaktoren, Stuttgart, 2001. Henard, D. H. and D. M. Szymanski, Why some new products are more successful than others, in: Journal of Marketing Research, Vol. 38 (3), p. 362 375, 2001. Herstatt, C.; Anwender als Quellen für die Produktinnovation, Zürich, 1991. Herstatt, C., C. Lüthje and C. Lettl, Wie fortschrittliche Kunden zu Innovationen stimulieren, in: Harvard Business Manager, Vol. 24 (1), p. 60 68, 2002. Iansiti, M. and K. B. Clark, Integration and dynamic capability: Evidence from product development in automobiles and mainframe computers, in: Industrial and Corporate Change, Vol. 3 (Special Issue 1), p. 557 605, 1994.
References. References 4/7 Jenner, T.; Überlegungen zur Integration von Kunden in das Innovationsmanagement, in: Jahrbuch der Absatz- und Verbrauchsforschung, Vol. 46 (2), p. 130 147, 2000. Jeppesen, L. B.; User toolkits for innovation: Consumers support each other, in: Journal of Product Innovation Management, Vol. 22 (4), p. 347 362, 2005. Kahn, K. B.; Market orientation, interdepartmental integration, and product development performance, in: Journal of Product Innovation Management, Vol. 18 (5), p. 314 323, 2001. Karle-Komes, N. (1997); Anwenderintegrationin die Produktentwicklung. Generierung von Innovationsideen durch die Interaktion von Hersteller und Anwender innovativer industrieller Produkte, Frankfurt a.m. u.a., 1997. Kirchmann, E. M. W.; Gründe und Effizienz der Involvierung des Anwenders in den Innovationsprozeß, in: Journal für Betriebswirtschaft, Vol. 46 (2), p. 76 88, 1996. Kottkamp, S.; Erprobung innovativer Investitionsgüter bei Erstkunden, Wiesbaden, 1998. Lilien, G. L., P. D. Morrison, K. Searls, M. Sonnack and E. Von Hippel, Performance assessment of the lead user idea-generation process for new product development, in: Management Science, Vol. 48 (8), p. 1042 1066, 2002. Lüthje, C.; Kundenorientierung im Innovationsprozess: Eine Untersuchung der Kunden-Hersteller-Interaktion in Konsumgütermärkten, Wiesbaden, 2002. Mantel, S. J. and J. R. Meredith, The role of customer cooperation in the development, marketing and implementation of innovations, in: Hübner, H., p. 27 36, 1986. March, J. G.; Exploration and exploitation in organizational learning, in: Organization Science, Vol. 2 (1), p. 71 87, 1991.
References. References 5/7 Mason, K. and L. C. Harris, Pitfalls in evaluating market orientation: An exploration of executives' interpretations, in: Long Range Planning, Vol. 38 (4), p. 373 391, 2005. McDermott, C. M.; Managing radical product development in large manufacturing firms: a longitudinal study, in: Journal of Operations Management, Vol. 17 (6), p. 631 644, 1999. Melheritz, M.; Die Entstehung innovativer Systemgeschäfte. Interaktive Forschung am Beispiel Verkehrstelematik, Wiesbaden, 1999. Millson, M. R. and D. Wilemon, The impact of organizational integration and product development proficiency on market success, in: Industrial Marketing Management, Vol. 31 (1), p. 1 23, 2002. Piller, F. T.; Von Open Source zu Open Innovation, in: Harvard Business Manager, Vol. 25 (12), 2003. Piller, F. T. and D. Walcher, Toolkits for idea competitions: a novel method to integrate users in new product development, in: R&D Management, Vol. 36 (3), p. 307 318, 2006. Pruitt, J. and T. Adlin; The Persona Lifecycle: Keeping People in Mind Throughout Product Design, Amsterdam, Boston (2006). Prahalad, C. K. and V. Ramaswamy, Wenn Kundenkompetenz das Geschäftsmodell mitbestimmt, in: Harvard Business Manager, Vol. 22 (4), p. 64 75, 2000. Ram, S. and J. N. Sheth, Consumer resistance to innovations: The marketing problem and its solutions, in: Journal of Consumer Marketing, Vol. 6 (2), p. 5 14, 1989. Reichwald, R. and F. Piller, Open Innovation: Kunden als Partner im Innovationsprozess, 2005. Ritter, T. and H. G. Gemünden, The impact of a company's business strategy on its technological competence, network competence and innovation success, in: Journal of Business Research, Vol. 57 (5), p. 548 556, 2004.
References. References 6/7 Rogers, E. M.; Diffusion of Innovations, New York, 2003. Rüdiger, M.; Marketing-Erfolgsfaktoren bei Innovationen - Eine kritische Analyse der Studien von Cooper und Kleinschmidt, Manuskripte aus den Instituten für Betriebswirtschaftslehre der Universität Kiel, Kiel, p. 1 28, 1997. Sandberg, B.; Creating the market for disruptive innovation: Market proactiveness at the launch stage, in: Journal of Targeting, Measurement and Analysis for Marketing, Vol. 11 (2), p. 184 196, 2002. Shah, S. K.; Motivation, governance, and the viability of hybrid forms in open source software development, in: Management Science, Vol. 52 (7), p. 1000 1014, 2006. Shaw, B.; The role of the interaction between the user and the manufacturer in medical equipment innovation, in: R&D Management, Vol. 15 (4), p. 283 292, 1985. Sidhu, J. S., H. R. Commandeur and H. W. Volberda, The multifaceted nature of exploration and exploitation: Value of supply, demand, and spatial search for innovation, in: Organization Science, Vol. 18 (1), p. 20 38, 2007. Singh, S. and A. Ranchhod, Market orientation and customer satisfaction: Evidence from British machine tool industry, in: Industrial Marketing Management, Vol. 33 (2), p. 135 144, 2004. Steinhoff, F.; Kundenorientierung bei hochgradigen Innovationen. Konzeptualisierung, empirische Bestandsaufnahme und Erfolgsbetrachtung, Wiesbaden, 2006. Thomke, S. and E. von Hippel, Customers as Innovators, in: Havard Business Review, p. 74 81, 2002. Trommsdorff, V. and F. Steinhoff, Innovationsmarketing, München u.a., 2007.
References. References 7/7 van der Panne, G., C. van Beers and A. Kleinknecht, Success and failure of innovation: A literature review, in: International Journal of Innovation Management, Vol. 7 (3), p. 309 338, 2003. Verworn, B. and C. Herstatt, The innovation process: an introduction to process models, Arbeitspapier Nr. 12, TU Hamburg Harburg, p. 1 16, 2002. von Hippel, E.; Successful industrial products from customer ideas, in: Journal of Marketing, Vol. 1 (1), p. 39 49, 1978. von Hippel, E.; A customer-active paradigm for industrial product idea generation, in: Research Policy, Vol. 7, p. 240 266, 1978. von Hippel, E.; Lead users: A source of novel product concepts, in: Management Science, Vol. 32 (7), p. 791 805, 1986. von Hippel, E.; User toolkits for innovation, in: Journal of Product Innovation Management, Vol. 18 (4), p. 247 257, 2001. von Hippel, E. and R. Katz, Shifting innovation to users via toolkits, in: Management Science, Vol. 48 (7), p. 821 833, 2002. Wu, C. G., J. H. Gerlach and C. E. Young, An empirical analysis of open source software developers motivations and continuance intentions, in: Information and Management, Vol. 44 (3), p. 253 262, 2007.