Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example, "Marble Products #10" Belvedere 622c Fixture Can be used also to replace the #112 two handle fixture that came with Belvedere Shampoo Bowls for years prior to 1990. The # 112 fixture is discontinued but we have most parts available as seen below. Note: If you are replacing a 2-handle fixture with the 622c, then you may want to purchase the Cover Plate below to Notice to Plumbers: The OD diameter of the treads at the point that this fixture goes through the shampoo bowl is 1-1/8 inch
Page 2 Handle for Belvedere #622c Single Lever Fixture * Handle Only * * Replacement Handle for Belvedere # 622TC Single Handle Fixture * Crystal Clear Plastic Handle * "Tear Drop Shape" when looking down from top * Includes: Handle Cover, Handle Screw, Handle Washer and Handle Flo-Temp Cover Plate Use with #622c and #528 Fixture Includes: 1- Cover Plate 1- Gasket 1- Mounting Bracket 2- Screws Place the Flo-Temp cover plate and gasket over the 2 left-hand holes in the bowl fixture deck. Then attach the mounting bracket on the bottom side of the bowl with the 2 mounting screws included.
Page 3 622c Cartridge The only replacement part for the 622c Fixture comes with clip as shown 522 Fixture Deck Mount Fixture Chrome Single Handle Control Replacement Cartridge sold below Will NOT fit older Belvedere Bowls, Please See the #622c (sold above) as a replacement fixture. May Need Cover Plate for 2 of the 3 Holes in Bowl (Sold Above)
Page 4 528 Fixture with Spout Deck Mount Fixture Fits Belvedere Bowls. NEW! Deck Mount Fixture By BELVEDERE, Chrome, Single Handle Control with Diverter Spout * Fits Belvedere Bowls. * May Need Cover Plate for 2 of the 3 Holes in Bowl * Sold Separately above. * This Fixture Replaces the Discontinued 2 handle with Diverter Spout # 4228P Fixture Replaces the Discontinued #4228P Spout Fixture
Page 5 Vacuum Breaker # 403 Fits Only Belvedere Bowls This is a one way valve that saves the integrity of the fresh water system by NOT allowing contaminate water (water contaminated with perm solution, neutralizer, hair color, etc.) from mixing with the fresh water system that we drink. Material: Plastic Plumbing Code: ASSE #1001 Consult your local plumber and building codes for need of this product. Vacuum Breaker * ONLY # 403 Fits ONLY Belvedere Bowls Includes: Vacuum Breaker only * Material: Plastic * Plumbing Code ASSE # 1001 * Shampoo Hose is sold separately. This is a one way valve that saves the integrity of the fresh water system by not allowing contaminate water ( water contaminated with perm solution, neutralizer, hair color and etc.) from mixing with the fresh water system that we all drink. Consult your local plumber and building codes for need of this product.
Page 6 Hose Receiver Kit for Vacuum Breaker * Fits Belvedere Shampoo Bowls * Vacuum Breaker Shampoo Hose Receiver * Has 2-1/2" holes to the Left of the Hose Opening to accommodate Belvedere Vacuum Breaker's #403 or #503 * Complete with Clamp (Steel square and 4 screws) and Gasket * Chrome (Plastic) * Dimension of Receiver 2-7/8" x 2-5/8" LA, CA Vacuum Breaker #503C This vacuum breaker is a MUST for areas below: Oregon state, Wisconsin State, and Los Angeles County, CA Includes: #503 Vacuum Breaker, Hose Receiver, and Hose from Fixture to Breaker * ASSE 1014 Approved * Dimension of Receiver 2-7/8" x 2-5/8" * Shampoo Hose is sold separately. This is a one way valve that saves the integrity of the fresh water system by Not allowing contaminate water ( water contaminated with perm solution, neutralizer, hair color and etc.) from mixing with the fresh water system that we all drink. Consult your local plumber and building codes for need of this product. * Replaces #404 Vacuum Breaker *
Page 7 Hose Receiver Kit * Plain * Plain Shampoo Hose Receiver * NOT for Vacuum Breaker * Fits Belvedere Shampoo Bowls Only * Complete with Clamp (Steel square and 4 screws) and Gasket * Chrome (Plastic) * Dimension of Receiver 2-7/8" x 2-5/8" Whiz Spray Hose screws on to fixture Length: 42 inches
Page 8 Seats Fits # 112 Fixture package contains: 2-brass seats Gland Assemblies Fits # 112 Fixture *** No Longer Available *** package contains: 1-hot and 1-cold Gland Assemblies Complete Strainer Assembly 3-1/2" The smaller 1-1/2" strainer assembly has been discontinued. Package includes strainer cup ( 1 ) and items ( 2 ) thru ( 8 ) as shown in illustration. Strainer 3-1/2" Plastic strainer cup only
Page 9 Mounting Bracket Fits most Belvedere Bowls (#3800, 3100, 8000, 8100, 8200, 9000, & 1980W) & Marble Products Fiber Glass Bowls #10 and #30 Bracket has 2 slots to accommodate 2-tongues on Back of Bowl that is Parallel to Wall. Tongues are 9" Center Package contains: Metal Bracket and 1-Camber Bolt usually mounted with 4 wood screws ( not included ) Note: #3100 bowl needs shorter leveling bolt which is not included, but may be Shampoo Bowl Bracket Fits Belvedere Bowls (Acrylic/ABS Plastic Bowls) Package contains: Upper Metal Bracket and Lower Metal Bracket usually mounted with 4 wood screws (not included) Shampoo Bowl Bracket * Fits Acrylic/ABS Bowls Shampoo Bowl Mounting Bracket Fits: Marble Bowls Triangle Shape Metal Mounting Bracket Fits: Marble Products Man made Marble Bowls Has two taps turned out on top with holes to bolt into bottom of Shampoo Bowl Package contains: Metal Bracket and 1-Camber Bolt usually mounted to wall with 4 wood screws ( not included ) Fits: Marble Products Model # 100, 200, 2000, 3000W and 4000 Marble Shampoo Bowls Marble Shampoo Bowl Mounting Bracket
Page 10 Koken Gypsy Bowl Bracket Fits: Koken Gypsy Bowls( Picture on the left) * Steel tube that has 2 - tubes that come from back of bowl that fit under side lip of bowl, V - Shape in back with 3 - Holes to mount to wall with screws (screws Not included) * Fits Only Koken Gypsy Bowl * Note Gypsy bowl is a all thin plastic bowl Koken Gypsy Bowl Mounting Bracket This Bracket fits the shampoo bowl above. ************************* Koken / Takara Belmont Products ************************* Koken / Takara Belmont Fixture # 700 " Two Handle " Hot-Cold Fits all older Belvedere & KOKEN Bowls Replaces the Belvedere #112 fixture that is no longer made. Chrome ( Solid Brass Workings ) Shampoo hoses sold separately on this page. 3 " centers Koken / Takara Belmont #700 Two Handle Fixture Chrome Koken / Takara Belmont #900 same as above except Brass Plated Outside
Page 11 Fixture/Part Handles (Set) Fits #700 * Fits Koken 2 - Handle Fixture * Fits # 700 Fixture * Crystal Clear Plastic Handles ( Hot and Cold ) * Includes Handles, Plastic Caps ( Hot and Cold ) and Screws #550N Koken Single Lever Fixture by Belmont Single Lever Fixture Fits Koken and Marble Shampoo Bowls. Note: Fixture Opening in Bowl must be a Minimum of 1-3/4" and a Maximum of 2" to accommodate this fixture.
Page 12 Marble Products # 500 Fixture The most advanced single control faucet made. Pull up for exact pressure desired. Dial the temperature you like, left for Hot, right for Cold. Turn water on or off without resetting. The #500 "Dial-Flo" has only one moving part. * Fits Marble, MPC & Koken Shampoo Bowls Note: Fixture Opening in Bowl must be a Minimum of 1-3/4" and a Maximum of 2" to accommodate this fixture. Handle for Dial Flo #500 Fixture * Handle Only * Before June 2005 * Fits: Marble 500 "Dial-Flo" Single Handle Fixture made before June 2005 * Color: Crystal Clear * Shape: Round Sides with Flat on top & Flat on Bottom * Fastens on to fixture with Screw (included) under Cap (button) * Fits Fixture made before June 2005 * Has 9 ridges where it fits onto stem
Page 13 Fixture Dial Flo * Plug Button Only * Plug Button "top to cover screw" * Crystal Clear Plastic * Fits #500 "Dial-Flo Faucet Handle Fixture Dial Flo #550 Fixture * Handle Only * After June 2005 Handle with Cap (button) and screw Only * Fits: Marble 550 "Dial-Flo" Single Handle Fixture * Color: Crystal Clear * Shape: Round Sides with Flat on top & Flat on Bottom * Fastens on to fixture with Screw (included) under Cap (button) * When looking into the bottom of handle where the handle fastens onto the fixture it is "DIAMOND SHAPE" * Fits Fixture made After June 2005 * This Fixture is turned on by pushing the handle backwards and off by pulling handle forward * Fits "DIAMOND SHAPE" stem Fixture Dial Flo Handle Cap * Only * Plug Button "top to cover screw" * Crystal Clear Plastic * Fits #550 "Dial-Flo Faucet Handle * Has "M P C" printed on button
Page 14 Fixture Dial Flo Cam (Stem) Only * Before June 2005 * Fits: Marble 500 "Dial-Flo" Single Handle Fixture made before June 2005 * Color: Gray Plastic * Shape: 3/8" Round x 3-1/4" long with groves on one End for Handle & Tapered on Bottom End * Fits Fixture made before June 2005 * Has 8 ridges where it fits onto stem Sold With Fixture Cartridge Kit Below Fixture Cartridge Kit & Dial Flo Cam (Stem) * Fits Marble #500 Dial-Flo Fixture * "Leaky Faucet" this kit will replace the wore parts in the #500 "Dial-Flo" Faucet by Marble Products Co. * Fits "Pull Up" to turn on water Fixture ( #500 fixture) * Includes: Cam (Stem), Sleeve, Cartridge and Gasket Marble Cartridge Kit & Dial Flo Cam (Stem) for #500 Fixture Fixture Cartridge Kit * Fits #550 Fixture Fits #550 DIAL-FLO FAUCET BY Koken / MARBLE PRODUCTS CO * "Leaky Faucet" this kit will replace the wore parts in the * Fits Push back to turn on & Pull forward to shut off Fixture * Number printed on side of part "FL02GJ"
Page 15 ** Note Blue Cartridge is NO Longer Available originally this fixture was made and sold with a BLUE color cartridge That fixture has been Discontinued because it was found to be too tight, it was hard to turn on and off. If you have a fixture with a blue cartridge you will need to buy a NEW FIXTURE. *** The Green Cartridge shown here will NOT fit your Blue Cartridge Fixture *** #400 Diverter Faucet Spout * For use with #500 "Dial-Flo" or the Newer #550 Dial-Flo single lever faucet and MPC # 1735 "Soft-Flo" Shampoo Hose Spray. * Faucet has 4-1/2" Swivel Spout with manual diverter knob. * Pull up to divert water through spray hose, push down to redirect through spout. * Diverter Faucet Spout ONLY comes with hose to connect to faucet * Note: Opening in bowl must be a minimum of 1-5/16" and a maximum of 1-7/16" to accommodate this fixture. Vacuum Breaker FITS: Marble # 10 Bowl & Collins Concept Bowl Includes: Vacuum Breaker, Hose Receiver, and Hose to Fixture to Breaker * Dimension of Receiver 3-1/4" x 2-3/4" This is a one way valve that saves the integrity of the fresh water system by NOT allowing contaminate water (water contaminated with perm solution, neutralizer, hair color, etc.) from mixing with the fresh water system that we drink. National Plumbing Code Number: ASSE 1001 Consult your local plumber and building codes for need of this product.
Page 16 Marble Products Hose Receiver Kit for Marble Vacuum Breaker FITS: All Marble Product Shampoo Bowls & Collins Concept Bowl * Has 2-1/2" Holes just left of the hose to mount vacuum breaker * Fastens to shampoo bowl with steel bar with bolt & thumb nut included * Also included rubber gasket for receiver and vacuum breaker * Dimension of Receiver 3-1/4" x 2-3/4" * Material: CHROME PLASTIC * Color: Chrome ***************** ************************* Marble Products Los Angeles Vacuum Breaker Includes: Los Angeles Vacuum Breaker Hose Receiver and 22" Hose from Fixture to Breaker * Dimension of Receiver: 3-1/4" x 2-3/4" * TO BE USED FOR Los Angeles, California Marble Los Angeles Vacuum Breaker ***************** ************************* Fixture Repair Kit Fits Marble Vacuum Breaker Marble Fixture Repair Kit fits marble Vacuum Breaker * Includes: Black O-Ring and White Plastic Valve with Red Rubber Washer
Page 17 Connecting Hose for Marble Vacuum Breaker This is the HOSE that connects the Vacuum Breaker to the Fixture The length is about 24" long with female couplings on each end The hose is 3/8" inside diameter (ID) 250 PSI Soft-Flo Shampoo Hose by Marble Products Screws on to Fixture Length: 42 inches " Catch-All " Hair Trap Model #1701 Prevents hair from clogging the shampoo bowl drain. Fits existing brand or model of shampoo bowl drain.
Page 18 Shampoo Bowl Hole Cover Fits: Marble Bowls Hole Cover Chrome Cover plate with rubber seal washer and bottom washer with wing nut fastener. Fits: Marble Products Man made Marble and Fiberglass Shampoo Bowls Hose Receiver Kit for Jeffco Brand Vacuum Breaker * Has 2-1/2" Holes just left of the hose to mount vacuum breaker * Fastens to shampoo bowl with steel bar with bolt & thumb nut included * Also included rubber gasket for receiver and vacuum breaker * Dimension of Receiver 3-1/4" x 2-3/4" * Material: CHROME PLASTIC * Color: Chrome
Page 19 Marble Products Hose Receiver Kit For Shampoo Bowl * Fastens to shampoo bowl with steel bar with bolt & thumb nut included * Also included rubber gasket for receiver * Dimension of Receiver 3-1/4" x 2-3/4" * Material: CHROME PLASTIC * Color: Chrome Marble Hose Receiver Kit for Shampoo Bowl Marble Products Brand Complete 3 1/2" Strainer Assembly Includes: 3-1/2" Hair Strainer Cup, Strainer Body, Cardboard Gasket, Locknut, 1-1/2" Drain Tailpiece Tube, Tube Washer, Tube Slip Nut * Fits All Marble Products Brand Shampoo Bowls * Including: Fiberglass Bowls # 10 & # 30 * Cultured Marble Bowls #100, 200, 2000, 3000W, 4000, 300 & 2001 Marble Products Shampoo Bowl Strainer Cup * 3-1/2" Diameter Fits: Marble Products Shampoo Bowls * 3-1/2" Diameter * Material: Plastic * Color: Black/Gray
Page 20 Jeffco Fixture #570 Single Handle Chrome MODEL 570 Fits: Jeffco Shampoo Bowls and Marble Products Chrome Lever -Handle * Fixture Opening in Bowl must be a Minimum of 1-1/2" and a Maximum of 2-1/4" to accommodate this fixture * Height from sink to top of fixture when opened is 6" Meets ASME A112.18.1-2003/ CSA B 125-01 Jeffco Fixture Cartridge for #570 Single Handle Jefco Fixture Cartridge for #570 Single Handle Fits: Jeffco Shampoo Bowls Meets ASME A112.18.1-2003/ CSA B 125-01 Jeffco Shampoo Bowl Vacuum Breaker Includes: Vacuum Breaker, Hose Receiver, and Hose to Fixture to Breaker * Dimension of Receiver 3-1/4" x 2-3/4" * Jeffco Brand * National Plumbing Code Number: ASSE 1001 This is a one way valve that saves the integrity of the fresh water system by NOT allowing contaminate water (water contaminated with perm solution, neutralizer, hair color, etc.) from mixing with the fresh water system that we drink.