Containerized Infrastructure Solutions Fast and efficient deployment, anywhere, anytime Containerized Infrastructure for Business-Critical Continuity
Are you deploying a remote site faster than you can decide on the exact location? Is your site so isolated that sending installation engineers is just not practical? Are growth rates unpredictable resulting in excess capacity at your remote sites? Key Features & Benefits n Pre-assembled and factory tested to ensure quality and reliability n Custom designs available to meet individual site needs n Fully integrated power and climate systems for fast and easy installation n Accommodates a wide variety of equipment to support numerous applications n Remote monitoring to assist any service organization n Efficient supply chain with global reach to support remote, rural areas n Emerson Global Services is available 24/7/365 around the globe for installation and site visits Containerized Solutions from Emerson are the flexible and cost efficient solution you are looking for! Containerized Infrastructure Solutions are used for a variety of applications in industries such as oil & gas, mining, military, optical networks, telecommunications, signaling, and data networks. These structures are configured to site needs and built into different types of bodies, accounting for environmental, logistical and transportation concerns. Over the past decade Emerson has built thousands of containerized solutions around the world, leveraging our established network infrastructure expertise. Emerson designs and constructs integrated shelters for the following applications: n Small nodes Base stations (telecom mobile) Transmission nodes (telecom, oil & gas) Analyzer nodes (oil & gas) n Remote units BSCs (telecom mobile) Remote instrumentation (oil & gas) Repeater and distribution enclosures (telecom-optical) n Switching & control centers Control centers (oil & gas) MSC, optical main nodes, cable landing stations (telecom, IT) Automatic switchgears (oil & gas, mining) n Energy centers Power conversion and backup enclosures (telecom, IT) n Data centers Bank, telecom, IT, oil & gas, insurance networks These solutions are designed to protect your sensitive electronic equipment and provide power supply and climate controls, for fast efficient deployment to rural areas around the world. 2
A Flexible Time-Saving Solution Minimize lead-time and coordination efforts with Containerized Infrastructure Solutions. By using a prefabricated shelter solution from Emerson, the interior layout can be determined before the site is selected. Engineering plans and building preparation can begin at site inception. After determining where to locate your shelter within the site, the foundation is constructed and the shelter is installed. This process is faster and more cost efficient than refurbishing an old site or building a new one. When multiple sites are involved, deploying buildings with similar infrastructure configurations saves time and money. New Build Acquiring Engineer & purchase Civil works / site preparation Construction Installation Start up 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Containerized Solution Acquiring Engineer & purchase Civil works / site preparation Production in factory Construction Delivery Install Start up TIME SAVED = 30% Efficient Supply Chain Process Emerson has manufacturing plants and logistic resources all over the world. We deliver all of your solution components to a single Emerson facility or carefully selected local partner, for configuration and testing. All the equipment may also be integrated at this point. The complete solution is then delivered to the site, minimizing installation time. Project Management Support Designing, building and integrating a containerized infrastructure solution is a complex task. Before the revenue generating electronics equipment can be installed, many different competencies need to be harmonized. Engineering, selection of subsystems, sourcing, installation and commissioning on site are some of the major factors. Emerson s global network of skilled project managers will work closely together with you and your in-house experts, ensuring your Containerized Solution is built to your specifications. Emerson will be there throughout the entire process, from site inception, to operation and beyond. 3
Cooling, power, monitoring, pre-installed. Just plug and play your equipment. 4
Containerized Solutions from Emerson are engineered from the inside out to guarantee troublefree, reliable operation. All configurations are factory equipped, tested and commissioned with all required equipment, ensuring consistency, quality and speed to market. Small Nodes Small node solutions are suitable for compact telecom sites, base stations for mobile networks, and digital transmission sites with space requirements up to 10m 2 and power requirements up to 10kW. Emerson Network Power has designed and built nearly 1000 small node solutions for customers in Germany, US, Croatia, Bulgaria, Nigeria, Norway and Afghanistan. These solutions have been deployed in telecom, oil & gas and military industries. Transportation Compact and cost-effective small node solutions are designed to fit inside standard, high cube freight containers for highway transportation. When transportation limitations or site access restrictions are involved, transporting assembled structures may not be optimal or even possible. In these instances, a flat package configuration may be the answer [see Figure 1]. Frameworks ranging from 8 to 20 feet are stacked together, reducing transportation volume by 25%. Interior equipment can be shipped separately when necessary. Figure 1. Flat package configuration 5
Remote Units A remote containerized infrastructure is common for slightly larger applications such as base station controllers and optical distribution nodes in the telecom industry, remote instrumentation in the oil & gas industry, and backbone networks in the IT industry. Typical equipment includes instrument and telecom cabinets, optical distribution frames, and transmission or server cabinets. Shelter sizes vary, but are often up to 150m 2 with power requirements up to 40kW. The remote Containerized Solution shown in Figure 2 was designed for the oil & gas industry and powered with renewable energy via solar panels. All equipment was installed and tested prior to shipment. This remote site includes DC power systems, batteries, A/C and heating systems, power and alarm equipment, fire extinguishing system and a generator for backup. Figure 2. Remote unit with hybrid energy source 6
Containerized Solutions, like this modular, optical switching center, can be designed to match their surroundings or even stand out against them. In this particular case, many of the houses in the area were red, countryside homes, and the Containerized Solution was built to blend in with the local environment. Switching & Control Centers In telecom and IT networks, containerized solutions are designed for Mobile Switching Centers (MSCs), optical main nodes and cable landing stations. The oil & gas and mining industries use Emerson Containerized Solutions as automatic switchgears and control centers. Switchgear rooms are designed to both de-energize equipment and clear faults. Switchgear equipment is found in substations on the high voltage and low voltage side of large power transformers. Low-voltage switchgear is usually housed in a substation called a power distribution center. Control rooms are designed for the oil & gas, mining and chemical industries that operate 24/7/365. To keep systems up and running, many different types of power systems and equipment must be housed in a single control center. To simplify transportation and future expansion, large solutions like this are often built in 30m 2 to 50m 2 modules that can be expanded on the ground level or stacked as multiple stories. The entire building is prefabricated in sections that can withstand transportation to remote areas with little to no infrastructure. Mobile switching center interior By using a pre-fabricated structure, the interior layout, engineering, and building preparation can be carried out irrespective of site acquisition. Equipment installation and testing is completed prior to shipment to ensure everything is in top-functioning order when arriving on site. 7
Energy Centers Energy centers are small power stations with high power capacity for critical operation infrastructures. These fully redundant stations provide energy for various applications via power sources such as mains, gensets, UPS, batteries and DC systems. Energy centers usually house several UPSs, batteries and cooling equipment in addition to the critical customer equipment. There can also be DC power systems complemented with DC-AC inverters. Large modular Containerized Solutions are often built in 30m 2 to 50m 2 modules that can be expanded on the ground level or stacked as multiple stories. The entire building is prefabricated in sections that can withstand transportation to remote areas with little to no infrastructure. These containerized solutions are designed to operate in extreme environments, offering quick deployment and easy installation. This modular energy center was prefabricated in sections. It can be expanded on the ground level or stacked as multiple stories. 8
In this mobile data center, equipment is installed on rails that allow movement from front to rear and vice-versa, depending on site needs. Data Centers Containerized data centers for networks including telecom, IT, bank, oil & gas and other networks are designed to your specific requirements. These fullyredundant data centers traditionally house computer systems and associated components for telecommunications and storage systems. Typical equipment includes distribution frames (routers, switches, etc.), telecom and transmission cabinets, server racks and cooling equipment, UPSs and fire fighting systems. Emerson Network Power is the global leader in enabling Business-Critical Continuity. Everywhere. 9
Emerson has the expertise, knowledge and processes to provide high quality service, original manufactured parts, guaranteed repairs and easy access to product information. Containerized Infrastructure Solutions Typical System Elements D E F G A H C I K J L A B A B C D 10 External Flood-lights Fire-Extinguishing System Customer Equipment Climate System E F G H DC System & Battery Backup AC Distribution Optional AC Distribution Earthing System I J K L Access Control System Cableways Socket Outlets Raised-Floor
Complete System Integration Most network electronic sites involve several dedicated systems in order to provide a safe and reliable operating environment for your equipment. Power supply, backuppower, surge protection and climate control are some of the most critical. Along with the customer equipment, these subsystems have to be engineered to work together, delivered for assembly in the same time frame, and commissioned as a united whole. This is where Emerson Network Power excels. With in-house, world-leading expertise in all of these areas, Emerson can coordinate the entire project, delivering your integrated shelter quickly and cost effectively. We ensure efficient project management, optimized system integration, and on-time delivery and commissioning. Emerson Products TVSS AVR (Automatic Voltage Regulators) ATS (Automatic Transfer Switches) AC panels DC power & UPS systems Batteries Converters & inverters Air conditioners (HVAC) Monitoring / supervision 3rd Party Equipment TVSS Diesel Generators Batteries Cables / cable management Grounding and bonding Alarm & access control systems Transformers Raised Floor Automatic fire extinguishing systems Our Promise Flexibility Predesigned or custom solutions Alterations during construction Field expandable on site Modular and stackable Quality Preassembled & tested before delivery Earthquake and blast resistance Thermal and acoustic insulation Assurance Fast deployment Easy to install Trouble-free, reliable operation Emerson s engineering expertise and project management capabilities make remote site planning easy. We have the resources to deliver our shelters anywhere, by any means required. We are available 24/7/365 to support your current and future site needs. 11
Emerson (NYSE: EMR), based in St. Louis, Missouri (USA), is a global leader in bringing technology and engineering together to provide innovative solutions for customers in industrial, commercial, and consumer markets through its network power, process management, industrial automation, climate technologies, and appliance and tools businesses. For more information,visit: Emerson.com. Emerson Network Power, a business of Emerson (NYSE:EMR), is the global leader in enabling Business-Critical Continuity from grid to chip for telecommunication networks, data centers, health care and industrial facilities. Emerson Network Power provides innovative solutions and expertise in areas including AC and DC power, precision cooling, embedded computing and power, integrated racks and enclosures, power switching and controls, infrastructure management, and connectivity. All solutions are supported globally by local Emerson Network Power service technicians. For more information on Emerson Network Power s full suite of solutions specifically supporting the communications network infrastructure, including NetXtend outside plant enclosures, NetSure DC power systems, and NetPerform optimization services, visit: EmersonNetworkPower.com/EnergySystems. Learn more about Emerson Network Power products and services at: EmersonNetworkPower.com. This publication is issued to provide outline information only which (unless agreed by Emerson Network Power Energy Systems AB, in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Emerson Network Power Energy Systems AB reserves the right to alter without notice the specification, design or conditions of supply of any product or service. Emerson, Emerson Network Power and Business-Critical Continuity are trademarks of Emerson Electric Co. and/or one of its subsidiaries. Emerson Network Power Energy Systems Email: EnergySystems@Emerson.com Web: EmersonNetworkPower.com/EnergySystems North America Telephone: +1 800 800 1280 Latin America Telephone: +01 800 9262 777 Europe, Middle East and Africa Telephone: +385 1 560 3611 Emerson Network Power. The global leader in enabling Business-Critical Continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Infrastructure Management & Monitoring Outside Plant Power Switching & Controls Precision Cooling EmersonNetworkPower.com Racks & Integrated Cabinets Services Surge Protection 2011 Emerson Electric Co. All rights reserved. Code: EN306RC-Shelters