The Modular System Solution for Seat Shell Design MODULAR DESIGN INDIVIDUAL SITTING www.ottobock.com
MODULAR DESIGN INDIVIDUAL SITTING The Modular System Solution for Seat Shell Design MODULAR DESIGN INDIVIDUAL SITTING 2 Otto Bock Mobility Solutions NUTEC
NUTEC Innovative. Intelligent. Individual. People strive to position themselves as economically as possible. Conversely, those with postural and functional limitations cannot achieve and/or maintain an active, erect sitting posture for long periods. In order to make sitting easier for these people, an optimally adapted seating unit which compensates for the de cits of their bodies to the highest possible degree is required. With its modular system design NUTEC provides innovative solutions for seat shell construction. Complemented by the intelligent modules, the respective seat shell can be very precisely adapted to the individual requirements of the movement-limited person by NUTEC. In this manner NUTEC improves the degree of activity by means of correct and safe sitting, and thus also decisively improves their quality of life. In addition to the individual, therapeutic bene ts, self-suf ciency and social integration are promoted. NUTEC Otto Bock Mobility Solutions 3
MODULAR DESIGN INDIVIDUAL SITTING Everything ts perfectly in NUTEC. Time and again the NUTEC product line enables optimum combinations for the largest possible therapeutic bene t. Supplemented with NUTEC modules made of anodised aluminium, extremely different seat shells can be adapted to individual needs. The components of the NUTEC Modular System can be extended at any time and are easily exchangeable. Thanks to its intelligent interfaces, the seat system can be easily separated from the wheelchair and transported without problems. With the NUTEC Miniature Hardware, the entire system with all its advantages can also be adapted to children s individual needs. NUTEC components can be exactly adapted to the individual body regions. Well-conceived accessories complete the system for individual seating shell design. 4 Otto Bock Mobility Solutions NUTEC
NUTEC The System Solution Use-oriented and safe sitting with improved posture The largest possible freedom of movement Optimum support of good posture The basis for good sitting posture Self-explanatory, stable and safe NUTEC Otto Bock Mobility Solutions 5
MODULAR DESIGN INDIVIDUAL SITTING 6 Otto Bock Mobility Solutions NUTEC
NUTEC Headrests Adjustment with intelligence! Headrests ensure the wheelchair user s safety. The dynamic NUTEC headrests promote functional head posture, have different pads for supporting the head and can be adjusted to individual head shapes. They yield to the pressure exerted by the head and thus allow greater freedom of movement. Because the correct degree of hardness de nitely reduces loading stress, they are available with soft, medium or hard springs. Flip-Down Headrest The fold-down headrest, which clearly simpli es every day life during transfer or for hair care, is brand new. It can be combined with all customary head rest pads. Headrest with dynamic rock-n-lock Hardware NUTEC Otto Bock Mobility Solutions 7
MODULAR DESIGN INDIVIDUAL SITTING NUTEC for the Trunk Just to be on the safe side! A well adjusted seating unit promotes the best possible posture. Whether exible xation of the trunk to retain the user s own mobility or non-elastic material for particularly stable support and seating posture correction: NUTEC promotes the optimum adaptation to the trunk with intelligent individual parts. Different trunk support brackets serve to ensure the lateral positioning; the swing-away versions facilitate transfer into and out of the seat shell. Furthermore, the height and width adjustability ensure the optimal seat adaptation. The trunk support brackets can be easily released and pivoted away using the release button. In addition, individually fabricated lateral support brackets can be selected and mounted on the back tubes of the wheelchair. Furthermore, toolless adjustment by means of the optional fast adjustment as well as slotted holes and holes in the component parts are possible. An additional material layer ensures at and rm contact or support, respectively whether in a T-shirt or with a winter jacket. Different shapes and tension directions of the belts, such as shoulder harness, butter y harness or H harness, guarantee the required support in the right place. 8 Otto Bock Mobility Solutions NUTEC
Strap Riser 25 mm Pushbutton Swing-Away Trunk Support Hardware Kit Strap Riser 50 mm Miniature Pushbutton Swing-Away Trunk Support Hardware Kit Summer/Winter Receiver, miniature Summer/Winter Receiver Clamp on Bracket with lift to release Swing-Away Trunk Bracket NUTEC Otto Bock Mobility Solutions 9
MODULAR DESIGN INDIVIDUAL SITTING NUTEC Seating Unit Perfect for every seating accommodation! The basis for an optimum sitting posture is good and secure positioning of the pelvis. With NUTEC elements the pelvis can be positioned in the seat shell such that the trunk and head also bene t. NUTEC supports individual seating with different materials and shapes. For better positioning and easier handling ip-down as well as removable abductors are available. Quick Release Flip-Under Abductor Bracket In addition, the four-point lap belt can be used to promote the correct pelvis positioning. 10 Otto Bock Mobility Solutions NUTEC
Flip-Down Abductor Bracket Quick Release Lateral Hip Support Bracket Slide-Out Abductor Bracket Extension Bracket Hip Support Bracket Offset Hip Support Bracket NUTEC Otto Bock Mobility Solutions 11
MODULAR DESIGN INDIVIDUAL SITTING NUTEC Accessories Even more possibilities! NUTEC accessories ensure even more, stability and safety. Individual seat and back systems are easily and securely attached to the base frame with the connection hardware set and quickly removed again. With guide rails in diverse designs not only all available NUTEC component parts, but also many special design solutions can be attached. Beyond this, the NUTEC component parts can be extended with Otto Bock underarm rests and foot supports. As an appropriate supplement to the seating unit, therapy tables should be securely attached and individually adapted. The NUTEC communication tray mount is adjustable in its height, rotation and inclination as well as combinable with single and double guide rails. It is the ideal solution to accommodation of communication devices and individually fabricated therapy tables. 12 Otto Bock Mobility Solutions NUTEC
Communication Tray Mount Mounting Track Single Mounting Track Double Knob Hardware Kit NUTEC Otto Bock Mobility Solutions 13
MODULAR DESIGN INDIVIDUAL SITTING Ready for everyday life with NUTEC! NUTEC grows with you! Our modular NUTEC System expresses our desire to support and promote the most active possible participation in everyday life. For this purpose many individual possibilities are available via NUTEC a completely new dimension of participation in the activities of daily life. Even though constitution, size and age of the patients play an important role, it is good to know that nearly all NUTEC components are available in two sizes: one for adults and one for children. This is particularly important because patients who are still growing make special demands on seating systems. Children s power wheelchair Skippi with NUTEC seat Adjustable seating depth and width, adjustable lateral support brackets, possibilities for head rest mounting, anatomically precontoured seat and back surfaces. The separate back unit can be additionally combined with the standard seat cushion. 14 Otto Bock Mobility Solutions NUTEC
... and life becomes easier! The exible NUTEC seats for children can be adapted at any time and supplemented with further NUTEC elements. Their cover is protected against moisture, removable and washable. The hardness of the high-quality foam upholstery can be coordinated with the maximum body weight of the small patients. New and available in two sizes is the NUTEC Adjustable Kids Seat. Different seat lines, such as Kimba, can be excellently complemented by it. Even in the basic model, a hip-thigh guidance as well as adjustable trunk support brackets are included in the delivery package. Optionally available are solid or swing-away support brackets, adjustable summer/winter function, different head rests, abductors, arm rests and a 25 back angle adjustment. NUTEC Otto Bock Mobility Solutions 15
Otto Bock 646D424=GB-01-0909 The right to make technical modifications required for improvement is reserved. Otto Bock HealthCare GmbH Max-Näder-Straße 15 37115 Duderstadt/Germany Phone +49 5527 848-1590 Telefax +49 5527 848-1676 reha-export@ottobock.de www.ottobock.com www.ottobock.com