Information MINIFIX Carcase connectors MINIFIX 1. B 0 75 (6.00 8.30). 75 165 (8.30 11.30) 3. 165 195 (11.30 1.30) Ø 6 x 1.5.1
Connector Technology, Shelf Supports Carcase Connectors MINIFIX Dimension A Drilling depth 6.0 6.17.014 6.17.710 Dimension A Drilling depth 3 11.5 6.6.666 6 13.0 6.6.670 9 14.5 6.6.693 Dimension A Drilling depth Cover cap 8.0 6.6.073 6.6.173 6.6.373 6.6.573 9.5 6.6.075 6.6.575 Dimension A Drilling depth 8.0 6.6.583 16-9 6.4.550 6.4.359 6.4.751 MINIFIX S100 Connecting bolts Ø Ø 11 4 6.7.91 34 6.8.98.
Carcase Connectors MINIFIX S100 Connecting bolts Ø MINIFIX COMFORT C100 Spreading bolt Ø 7.5 4 6.7.59 34 6.8.599 MINIFIX S00 Connecting bolts Ø Ø 11 4 6.7.679 34 6.8.679 Ø 7.5 4 6.7.699 34 6.8.699 11.5 4 6.09.11 34 6.09.311 MINIFIX M100 Connecting bolts Ø Ø 8.5 4 6.7.615 34 6.8.615 Ø Ø 11 4 6.7.67 34 6.8.64 Ø 7.5 4 6.7.645 34 6.8.64 L.3
Connector Technology, Shelf Supports Carcase Connectors MINIFIX Double bolt Ø 34 6.8.786 RONDORFIX Carcase connector for wood thickness 16 mm Installation Drilling depth For drilled hole Ø 8 mm, with snap ring Ø Wood thickness 16 4 6.7.805 34 6.8.80 19 4 6.7.814 34 6.8.811 Drilling depth RONDORFIX Eccentric housing without flanged rim MINIFIX GV Mitre-joint connector Ø 4 6.1.859 44 6.1.939 1 7 6.75.061 Cover cap 6.78.704.4
Carcase Connectors RONDORFIX Glued dowels with M6 internal thread 8 11 039.33.46 10 9 039.33.364 RONDORFIX Connecting bolt MAXIFIX 35 Carcase Connectors Dim. A Drilling distance Bolt hole Drilling depth Wood thickness Ø 10.5 6.75.77 6.75.776 19 6.87.013 6.87.713 Ø 7.5 6.75.098 6.75.990 19 6.87.003 6.87.703 Trim cap for MAXIFIX 35 6.87.390.5
Carcase Connectors MAXIFIX S35 Connecting bolt Ø 5 CONFIRMAT One-piece connector Drilling hole Ø Ø 16 8.5 6.87.931 48.5 6.87.93 MAXIFIX 35 Worktop connector Blind drill hole Through hole for shank Ø Ø Ø 38 64.37.098 50 64.37.196 68.5 3-41 6.87.041 Worktop connector 65 3-41 6.96.11 150 75-84 6.96.0 Ø Ø 7.0 50 64.4.190 7.0 50 64.43.190 64.43.111.6
Connecting Fittings Wood dowels Glue-in sleeve Ø 8 Ø 8 10.0 039.33.04 6 30 1800 67.8.130 35 150 67.8.135 8 30 1000 67.8.30 10 30 630 67.8.330 Wood biscuits 10 53 19 67.90.010 1 56 3 67.90.00 16 56 30 67.90.003 1 039.3.050 Screw-in sleeve Ø Ø 1.5 Ø 14.0 030.10.584 Spreading sleeve, nylon Ø 1 04.98.051 Glue-in sleeve Ø 11 039.33.66 13 039.33.060 Spreading dowel 5 8 051.45.004 8 1 039.00.061.7
Connecting Fittings KEKU Suspension fittings Ø 6.49.350 Ø 6.49.365 Ø 6.49.366 Installation Ø 6.49.367 Ø 6.49.356 Ø 6.49.357.8
Connecting Fittings KEKU Push-in fittings KEKU AD Double partition fitting Ø 6.50.368 Ø 6.50.390 Ø 6.50.359 Installation Ø 6.51.380.9
Connecting Fittings MODULAR Connection fitting for recess mounting 17 58 13 11.3±0.05 6.47.003 MODULAR Connecting screws 16 63 1 8.3±0.05 6.47.049 17 58 13 11.3±0.05 6.47.01 0 58 16 11.3±0.05 6.47.076 Ø 11 13 4 1.5 6.47.978 16.0 6.47.987 5.0 6.47.996 3.0 6.47.870 16 5 16.0 6.47.889 3.0 6.47.898 13 63 11 8.3±0.05 6.47.094 16 63 1 8.3±0.05 6.47.058 Connecting screws and sleeves for drilled through-hole Ø 5 mm Ø 8 00.9.711 10 00.9.70 00.9.1.10
Connecting Fittings Connecting screws and sleeves for drilled through-hole Ø 5 mm Ø Connecting brackets 5 15 67.00.911 18 67.00.91 67.00.913 5 64.8.955 15 0.34.157 3 64.5.909 64.5.703 7 mm 8 36 mm 67.01.715 35 mm 37 45 mm 67.01.717 558.1.943 Mirror fittings 9.01.710.11
Shelf Supports Shelf supports made of steel For drilled hole Ø 3 mm, load carrying capacity 60 kg Ø For drilled hole Ø 5 mm, load carrying capacity 80 kg Ø 8.06.706 8.39.705 8.04.54 For drilled hole Ø 4 mm, load carrying capacity 60 kg Ø 8.04.711 For drilled hole Ø 7 mm or 7.5 mm (with sleeve), load carrying capacity 100 kg Ø 8.04.70 For drilled hole Ø 5 mm, load carrying capacity 80 kg Ø 8.43.905 8.38.708 Sleeve 8.01.505 8.01.701 Ø 8.50.508 8.50.704.1
Shelf Supports Shelf supports made of zinc alloy For drilled hole Ø 5 mm, load carrying capacity 15 kg Ø Shelf supports made of plastic For drilled hole Ø 5 mm, load carrying capacity 80 kg Ø 8.4.710 8.1.405 8.1.705 For drilled hole Ø 8 mm, load carrying capacity 60 kg Ø 8.4.70 EX-CELLENT H Shelf support Knock in, load carrying capacity 60 kg 8.3.75 Screw fixing, load carrying capacity 60 kg 8.18.706 81.3.70.13
Connector Technology, Shelf Supports Shelf Supports Glass shelf supports made of zinc alloy For drilled hole Ø 5 mm, with rapid-action clamping, GC lifting safeguard/clamp Ø Tightening in drilled hole Glass shelf supports made of steel For drilled hole Ø 5 mm, round, with cap Ø 81.41.906 8.13.610 For drilled hole Ø 5 mm, plug-in, with twin grooves Ø With narrow glass supporting surface 87.6.454 For drilled hole Ø 5 mm, round, with locking screw Ø For glass thickness of 9 mm 8.4.730 Glass shelf supports made of plastic For drilled hole Ø 5 mm, glass thickness of up to 6 mm, with clip-in retainer Ø 81.4.403 8.0.715.14
Shelf Supports Shelf support for invisible installation, with mounting plate and side adjustment Glass shelf support Ø 1 mm Ø 83.33.904 Shelf support for invisible installation, with mounting plate and side adjustment ± 83.38.010 Shelf support with wooden thread and frame plug 19.0 110 83.33.930 15.5 100 83.33.931 Sizes in brackets for shelf thickness of mm and above Ø 19 1. ±1 83.3.014 14. ± 83.3.03.15
Shelf Supports Shelf supports with clamps 5 7 18 x 5 x 18 x 7.5 84.01.001 84.01.01 3 15 1 x 40 x 30 x 4.0 84.00.011 84.00.11 3 3 41 x 47 x 34 x 4.0 84.00.013 1 5 8 49 x x 5 x 3.0 84.01.061 84.01.61 6 10 5 x 6 x 8 x 3.5 84.01.06 84.01.6 8 1 55 x 9 x 31 x 4.0 84.01.063 84.01.63 4 18 6 x 54 x 47 x 4.5 84.00.00 84.00.0 4 3 5 x 69 x 48 x 4.5 84.00.003 84.00.03 4 40 40 x 105 x 75 x7.0 84.00.004 84.00.04 84.00.904 4 5 5 x 40 x 41 x 4.8 84.00.01 41 x 4 x 41 x 4.0 84.00.03 5 8 36 x 17 x 16 x 3.3 84.01.041 84.01.41 8 10 47 x 1 x 18 x 3.8 84.01.043 84.01.43 5 8 51 x 6 x 18 x 4.0 84.01.031 84.01.31 6 1 73 x 37 x 4 x 5.7 84.01.033 84.01.33.16
Shelf Supports Shelf supports with clamps 6 8 41 x 5 x 5 x 0.0 84.01.09 8 60 x 63 x 6.5 x 9.5 84.0.003 6 8 44 x 34 x 3 x 4.0 84.01.073 84.01.73 8 10 x 3 x 9 x 5.0 84.01.011 6 8 9 x x 14.5 x 4.0 84.01.051 84.01.51 40 x 30 x 14.5 x 4.3 84.01.05 84.01.5 6 10 49 x 36 x 16 x 4.5 84.01.053 84.01.53 8 10 59 x 30 x 18 x 3.5 84.0.043 84.0.43.17
Connector Technology, Shelf Supports Shelf Supports Glass shelfs 15 19 500 461 x 50 543.07.450 600 561 x 50 543.07.460 800 761 x 50 543.07.480 1000 961 x 50 543.07.400 Shelf support system for knocking into 9.5 x 4 mm groove Shelf support strip with apertures at 15 mm intervals Installation 8 793 x 00 543.08.470 793 x 00 543.08.570 8 793 x 00 543.08.41 793 x 00 543.08.51 83.45.708 83.45.100 Shelf support with support 83.49.706 83.49.108 Shelf support with support and screw hole Ø 83.47.70 83.47.104.18
Shelf Supports Shelf support for grooving shelves, special Shelf support system for screw fixing, dimensions 16 x 6 mm Shelf support strip with apertures at 14 mm intervals Installation 700.19.40 Shelf support system for knocking into 11 x 5 mm groove Shelf support strip with apertures at 5 mm intervals 3500 83.07.011 83.61.96 Glass shelf support 3500 83.1.003 83.1.905 83.68.005 83.68.907 51.68.090.19
Shelf Supports Shelf support system for screw fixing, dimensions 0 x 8 mm Shelf support strip with apertures at 14 mm intervals Shelf support system for screw fixing, dimensions 10 x 5 mm Shelf support strip with apertures at 15 mm intervals 3500 83.13.900 3500 83.05.017 Shelf support Shelf support 83.51.90 83.64.918.0
Shelf Supports Shelf brackets Folding brackets (A x C) 75 x 100 (<36 ) 100 x 15 (<40 ) 87.30.07 87.30.109 87.30.000 87.30.16 87.30.118 87.30.010 Top fixing holes Fixing holes for wall mounting 50 x 85 30 87.41.906 380 x 10 87.41.915 15 x 150 (<40 ) 150 x 00 (<50 ) 00 x 50 (<50 ) 50 x 300 (<60 ) 300 x 350 (<70 ) 87.30.5 87.30.17 87.30.08 87.30.43 87.30.145 87.30.046 87.30.61 87.30.163 87.30.064 87.30.70 87.30.17 87.30.073 87.30.89 87.30.181 87.30.08 Getting the best from your furniture..1