FlowCAD Webinar OrCAD / Allegro PCB Editor Tipps und Tricks
Print Screen from the Canvas
Open Windows Explorer with the working folder
Z-Copy: Copy a Shape to another Layer
Z-Copy: Copy a Shape to more than one Layer
Function Key (funckey) Example: Rotate a Component using a Function Key: When you enter following command in the Command window, with pressing R you can rotate a component during movement: Funckey r iangle 90 To add this Funckey permanently to your environment, add this command in the env File in your home directory
Where is my Environment (env) File?
More Function Key (funckey) to reduce mouse clicks Example: Pressing the space bar place a via with following command: funckey " " "pop bbdrill -cursor" Example: mirror a component funckey m "pop mirror"
How to define the same Environment settings for all users? Set up a SITE Variable: - Create a read only folder on your network - In this folder you can store the settings - Respect the required file structure - Set an environment variable on each users machine: CDS_SITE= <PATH to your SITE Folder>
For more information, check out our application notes: http://www.flowcad.ch/cms/upload/applicationnotes/flowcad_an_pcb_site.pdf
Rounding corners on connected lines
Export components placement for placement machines
Export all footprints and padstacks from an existing board
Reopen Command This very useful command reopens the design. Just enter reopen in the command window. Last changes are not saved! Write Command Allows to store the project in the same directory with your desired name. Example: write myboard.brd
Via Labels 10 Fragen. Danke für Ihre Mithilfe. Setup Design Parameters Via Labels
How can the output files be stored in different folders? Setup User Preferences File_Management Output_dir
How can I disable the file versioning? Setup User Preferences File_Management Versioning
How can I change the zoom factor? Setup User Preferences Ui Zoom Buttonfactor
Same Net DRCs not being generated? Most likely your DRC by-layer setting in the Constraint Manager is set to False
How to curves Clines? Use Slide Right Mouse Button Enhanced Arc Select Corner
Before: Pick here! After:
Enhanced Pad Entry: Disable the option for new databases: set the variable called "options_no_enhanced_padentry" in Setup > User Preferences > Route > Connect Category
Rotate a group of components, without rotating each component separately:
Solution: Set Rotation Point to User Pick in the Options Panel
Status Display: rectangles are icons
How to change the text size of several textblocks in one time? Before:
How to change the text size of several textblocks in one time? Select the area where you want to change the text size on the canvas Select the desired textblock size in the Options panel
How to change several line widths in one time? Edit Change Set Line width in Options panel select lines / clines
How to change the drill legend size? Open the template default-xx.dlt from following directory: <installation folder>\spb1650\share\pcb\text\nclegend Change the text size:
How to delete Island Shapes?
How to store colour views?
Align Components Before: After: The command is only available in the Placement Edit Mode!!
Enable Working Layer Mode: Activate the routing Layers.
When adding a via, you re prompted to select the layer on which you want to continue your trace.
How to calculate Line Impedance? Requires a correct layer stack-up!
When you want to know, which line width is required to obtain a certain impedance, just enter your desired impedance manually. The line width gets calculated accordingly. When a certain impedance is required for differential pair, You can enter the impedance as well. The tool calculates the spacing or width accordingly. You can chose which field should be adapted.
How associate a not connected pin to a net class? Enter following command in the command window: Cns_dummy_net Following window appears:
Where are the dimension commands? Since SPB 16.5, associative dimensioning is possible. All the commands are available in the right mouse button menu after selecting Manufacture Dimension Environment
How to dimension a cut-out? 1. Select Dimension Environment Linear Dimension 2. Select a cut-out boarder 3. Press Right Mouse Button Reject 4. Select the second boarder 2 3 4
«Design Reuse» A simple way to reuse a part of an existing design is to use the place replicate command. This command is only available in the placement edit and in OrCAD PCB Designer Professional or Allegro PCB Designer.
«Design Reuse» - Copy schematic from one project to another: - Create the netlist within the new capture project
«Design Reuse» Place all components
«Design Reuse» Place replicate apply
«Design Reuse» Place replicate apply
Fillets and tapered traces
Fillets and tapered traces Angle 45 60 90 Curved Off Curved On
- Fillets Before: After:
Tapered traces Enable the function: Before: Route Gloss Add Tapered Trace After:
Ende Besten Dank für Ihre Teilnahme und für Ihr Interesse! Für Fragen, Anregungen oder Bemerkungen erreichen Sie mich unter: Tel.: + 41 (0) 56 485 91 91 E-Mail: support@flowcad.ch